Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 206

Last change on this file since 206 was 206, checked in by raasch, 16 years ago
ocean-atmosphere coupling realized with MPI-1, adjustments in mrun, mbuild, subjob for lcxt4
Property svn:keywords set to `Id Rev`
File size: 55.5 KB

Line
1	#!/bin/ksh
2	# mbuild - Programmuebersetzungsscript
3	# $Id: mbuild 206 2008-10-13 14:59:11Z raasch $
4
5	# Prozedur zur Uebersetzung von Programmteilen mittels make-Mechanismus
6	# auf einem Remote-Rechner, ausgehend von Quellcode auf einem lokalen
7	# Rechner
8
9	# Folgende Probleme existieren unter Linux, wenn keine AT&T-Korn-Shell
10	# verwendet wird:
11	# Wertzuweisungen an Variablen innerhalb von DO-Schleifen werden nicht
12	# nach aussen weitergegeben. "while read line" funktioniert nicht
13	# innerhalb einer Pipe.
14
15	# letzte Aenderung:
16	# 06/05/02 - Siggi - Beginn der Entwicklung
17	# 12/06/02 - Siggi - Abschluss der Entwicklungsarbeiten
18	# 23/06/02 - Siggi - voerst kein make-clean, Abbruch bei batch-mode
19	# 24/07/02 - Siggi - Keine Verwendung der temporaeren Datei tmp_mbuild
20	# unter linux mehr noetig, da nun AT&T-Korn-Shell
21	# benutzt wird
22	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) validiert
23	# 19/12/02 - Siggi - ibmb validiert
24	# 05/02/03 - Siggi - hostname nobela included
25	# 04/03/03 - Siggi - host nech included
26	# 06/03/03 - Siggi - make_call_string is echoed without '' to
27	# file LAST_MAKE_CALL (otherwise error on NEC, because
28	# '' are part of compiler options
29	# 16/03/03 - Siggi - Two underscores are placed in front of every define
30	# string, in case that palm.f90 version contains
31	# such strings
32	# 16/04/03 - Siggi - First extensions for linux machines
33	# 24/06/03 - Siggi - host orkan included
34	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
35	# 24/07/03 - Siggi - host maestro admitted
36	# 06/08/03 - Siggi - host gregale admitted
37	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
38	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
39	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
40	# (-D$OMP=OMP) in order to avoid problems with
41	# OMP_NUM_THREADS
42	# 09/01/04 - Siggi - action above cancelled
43	# 28/01/04 - Siggi - action above re-cancelled
44	# 08/03/04 - Siggi - host scirocco admitted
45	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
46	# the respective .f90 file is not listed in the makefile
47	# and deletion is demanded by the user
48	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
49	# due to error in ssh installation (otherwise a prompt
50	# for the password appears)
51	# 23/07/04 - Siggi - changes due to the new berni configuration
52	# (federation switch)
53	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
54	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
55	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
56	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
57	# 24/04/05 - Siggi - netcdf support on lcmuk
58	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
59	# 12/05/05 - Siggi - netcdf support on ibm
60	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
61	# 18/05/05 - Siggi - netcdf support on nec
62	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
63	# 23/05/05 - Siggi - netcdf support on ibms
64	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
65	# 30/06/05 - Siggi - netcdf support on bora
66	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
67	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
68	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
69	# host gfdl5 (ibmy) admitted
70	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
71	# 20/01/06 - Siggi - cpp directive for ibmy
72	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
73	# 10/02/06 - Siggi - modifications for scp on decalpha
74	# 13/04/06 - Siggi - ostria admitted
75	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
76	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
77	# 29/05/05 - Siggi - atmos (lcide) admitted
78	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
79	# 24/11/06 - Siggi - breva and levanto admitted
80	# 07/02/07 - Siggi - adapted for RIAM (neck)
81	# 10/02/07 - Siggi - all hpmuk-related code removed
82	# 02/03/07 - Siggi - compilation of utility programs and transfer of
83	# scripts to remote hosts added (option -u)
84	# 14/03/07 - Siggi - fimm admitted, revision number added to terminal
85	# output
86	# 16/03/07 - Siggi - adjustments (netcdf) for lctit
87	# adjustments for running under pdksh, local ip-addres
88	# is not determined any more
89	# 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
90	# from configuration file
91	# host identifier (local_host) is read from config file
92	# 10/10/07 - Siggi - bugfix: handling of comment lines
93	# 18/07/08 - Siggi - adapted for lcsgih
94	# 21/07/08 - Siggi - mainprog (executable) is added to the tar-file
95	# ({mainprog}_current_version)
96	# 02/10/08 - Siggi - adapted for lcxt4
97
98
99
100	# VARIABLENVEREINBARUNGEN + DEFAULTWERTE
101	compile_utility_programs=false
102	config_file=.mrun.config
103	fimm=false
104	host=all
105	host_found=false
106	ibm_hb_done=false
107	lcmuk_done=false
108	locat=normal
109	makefile=""
110	remote_mode=interactive
111	scirocco=false
112	silent=false
113	suf=f90
114	update=false
115	working_directory=`pwd`
116
117	typeset -i ih ihost=0
118
119	typeset -R30 calltime
120	typeset -L20 column1
121	typeset -L50 column2
122	typeset -L70 column3
123	typeset -L40 version="MBUILD 2.0 Rev$Rev: 206 $"
124
125	# FEHLERBEHANDLUNG
126	# BEI EXIT:
127	trap 'rm -rf $working_directory/tmp_mbuild
128	if [[ $locat != normal ]]
129	then
130	printf "\n\n +++ mbuild killed \n\n"
131	else
132	printf "\n\n *** mbuild finished \n\n"
133	fi' exit
134
135
136	# BEI TERMINAL-BREAK:
137	trap 'rm -rf $working_directory/tmp_mbuild
138	printf "\n\n +++ mbuild killed by \"^C\" \n\n"
139	exit
140	' 2
141
142
143
144	# SHELLSCRIPT-OPTIONEN EINLESEN
145	while getopts :c:h:m:rs:u option
146	do
147	case $option in
148	(c) config_file=$OPTARG;;
149	(h) host=$OPTARG;;
150	(m) makefile=$OPTARG;;
151	(r) remote_mode=batch;;
152	(s) suf=$OPTARG;;
153	(u) compile_utility_programs=true;;
154	(\?) printf "\n +++ unknown option $OPTARG \n";
155	locat=parameter; exit;;
156	esac
157	done
158
159
160
161	# BATCH-MODE IST ZUR ZEIT NICHT FUNKTIONSFAEHIG
162	if [[ $remote_mode = batch ]]
163	then
164	printf "\n +++ sorry, batch mode does not work! \n"
165	locat=parameter; exit
166	fi
167
168
169
170	# PRUEFEN, OB KONFIGURATIONS-DATEI VORHANDEN
171	if [[ ! -f $config_file ]]
172	then
173	printf "\n +++ configuration file: "
174	printf "\n $config_file"
175	printf "\n does not exist"
176	locat=configuration; exit
177	fi
178
179
180
181	# LOKALEN RECHNER ERMITTELN
182	local_host_real_name=$(hostname)
183	# local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
184
185
186
187	# HOST-IDENTIFIER (local_host) AUS KONFIGURATIONSDATEI BESTIMMEN
188	line=""
189	grep "%host_identifier" $config_file > tmp_mbuild
190	while read line
191	do
192	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
193	then
194	HOSTNAME=`echo $line \| cut -d" " -s -f2`
195	host_identifier=`echo $line \| cut -d" " -s -f3`
196	if [[ $local_host_real_name = $HOSTNAME ]]
197	then
198	local_host=$host_identifier
199	break
200	fi
201	fi
202	done < tmp_mbuild
203
204	if [[ "$local_host" = "" ]]
205	then
206	printf "\n +++ no host identifier found in configuration file \"$config_file\""
207	printf "\n for local host \"$local_host_real_name\"."
208	printf "\n Please add line"
209	printf "\n \"\%host_identifier $local_host_real_name <identifier>\""
210	printf "\n to the configuration file."
211	locat=local_host; exit
212	fi
213
214
215
216	[[ $local_host_real_name = scirocco ]] && scirocco=true
217	[[ $local_host_real_name = fimm.bccs.uib.no ]] && fimm=true
218
219
220
221	if [[ $local_host != ibms ]]
222	then
223	config_file=$PWD/$config_file
224	else
225	config_file=`pwd`/$config_file
226	fi
227
228
229
230	# BENUTZERNAMEN AUF LOKALEM RECHNER AUS KONFIGURATIONSDATEI ERMITTELN
231	line=""
232	grep " $local_host" $config_file \| grep "%remote_username" > tmp_mbuild
233	while read line
234	do
235	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
236	then
237	local_username=`echo $line \| cut -d" " -s -f2`
238	fi
239	done < tmp_mbuild
240
241
242	if [[ "$local_username" = "" ]]
243	then
244	printf "\n +++ no user name found in configuration file"
245	printf "\n for local host \"$local_host\" "
246	locat=config_file; exit
247	fi
248
249
250	# LOKALEN QUELLTEXTPFAD ERMITTELN.
251	# ZUERST PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD FUER ALLE RECHNER
252	# VEREINBART WURDE.
253	# DAZU ZUNAECHST ALLE IN DER KONFIGURATIONSDATEI VEREINBARTEN GLOBALEN
254	# VARIABLEN SETZEN, WEIL DIESE EVTL. IN PFADNAMEN VERWENDET WERDEN
255	line=""
256	grep "%" $config_file > tmp_mbuild
257	while read line
258	do
259	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" && $(echo $line \| cut -c1) != "#" ]]
260	then
261	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
262	value=`echo $line \| cut -d" " -s -f2`
263	eval export $var=\$value
264	# eval echo \" $var=\$$var \" # AUSGABE ZU TESTZWECKEN
265	fi
266	done < tmp_mbuild
267
268	# NUN PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD VEREINBART WURDE
269	line=""
270	grep "%source_path" $config_file > tmp_mbuild
271	while read line
272	do
273	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
274	then
275	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
276	then
277	global_source_path=`echo $line \| cut -d" " -s -f2`
278	fi
279	fi
280	done < tmp_mbuild
281
282	line=""
283	grep " $local_host" $config_file \| grep "%source_path" > tmp_mbuild
284	while read line
285	do
286	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
287	then
288	local_source_path=`echo $line \| cut -d" " -s -f2`
289	fi
290	done < tmp_mbuild
291
292	if [[ "$local_source_path" = "" ]]
293	then
294	if [[ "$global_source_path" != "" ]]
295	then
296	local_source_path=$global_source_path
297	else
298	printf "\n +++ no source path found in configuration file"
299	printf "\n for local host \"$local_host\" "
300	printf "\n please set \"\%source_path\" in configuration file"
301	locat=config_file; exit
302	fi
303	fi
304	eval local_source_path=$local_source_path
305	eval local_source_path=$local_source_path
306
307
308	# EBENSO PFAD FUER DAS MAKE-DEPOSITORY ERMITTELN
309	line=""
310	grep "%depository_path" $config_file > tmp_mbuild
311	while read line
312	do
313	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
314	then
315	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
316	then
317	global_depository_path=`echo $line \| cut -d" " -s -f2`
318	fi
319	fi
320	done < tmp_mbuild
321
322	line=""
323	grep " $local_host" $config_file \| grep "%depository_path" > tmp_mbuild
324	while read line
325	do
326	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
327	then
328	local_depository_path=`echo $line \| cut -d" " -s -f2`
329	fi
330	done < tmp_mbuild
331
332	if [[ "$local_depository_path" = "" ]]
333	then
334	if [[ "$global_depository_path" != "" ]]
335	then
336	local_depository_path=$global_depository_path
337	else
338	printf "\n +++ no depository path found in configuration file"
339	printf "\n for local host \"$local_host\" "
340	printf "\n please set \"\%depository_path\" in configuration file"
341	locat=config_file; exit
342	fi
343	fi
344	eval local_depository_path=$local_depository_path
345	eval local_depository_path=$local_depository_path
346
347
348
349	# PRUEFEN, OB IN KONFIGURATIONSDATEI EIN HAUPTPROGRAMM
350	# VEREINBART WURDE
351	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
352	then
353	printf "\n +++ no main program or more than one main program defined"
354	printf "\n in configuration file"
355	locat=configuration; exit
356	else
357	line=`grep "%mainprog" $config_file`
358	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
359	then
360	printf "\n +++ no main program defined in configuration file"
361	locat=configuration; exit
362	fi
363	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
364	fi
365
366
367
368	# MAKEFILE vorhanden
369	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
370	if [[ ! -f $makefile ]]
371	then
372	printf "\n +++ makefile: "
373	printf "\n $makefile"
374	printf "\n does not exist"
375	locat=makefile; exit
376	fi
377
378
379	# HEADER-AUSGABE (TEIL1: MELDUNGEN UEBER LOKALEN RECHNER)
380	calltime=$(date)
381	printf "\n"
382	printf "#------------------------------------------------------------------------# \n"
383	printf "\| $version$calltime \| \n"
384	printf "\| \| \n"
385	column1="called on:"; column2=$local_host_real_name
386	printf "\| $column1$column2 \| \n"
387	column1="local username:"; column2=$local_username
388	printf "\| $column1$column2 \| \n"
389	column1="local IP-addres:"; column2=$local_addres
390	printf "\| $column1$column2 \| \n"
391	column1="config file:"; column2=$config_file
392	printf "\| $column1$column2 \| \n"
393	column1="makefile:"; column2=$makefile
394	printf "\| $column1$column2 \| \n"
395	column1="local source path:"; column2=$local_source_path
396	printf "\| $column1$column2 \| \n"
397	column1="make depository:"; column2=$local_depository_path
398	printf "\| $column1$column2 \| \n"
399	printf "#------------------------------------------------------------------------# \n"
400
401	# printf "\| \| \n"
402
403
404	if [[ $compile_utility_programs = false ]]
405	then
406
407	cd $local_source_path
408
409
410	# LISTE DER ZU PRUEFENDEN QUELLTEXTDATEIEN ERSTELLEN
411	source_code_files=`ls -1 *.$suf`
412
413
414
415	# VERZEICHNIS FUER DAS MAKE-DEPOSITORY ERZEUGEN,
416	# FALLS NOCH NICHT VORHANDEN. ANSONSTEN ALLE DATEIEN
417	# NEUEREN DATUMS IN DIESES VERZEICHNIS KOPIEREN
418	if [[ ! -d $local_depository_path ]]
419	then
420	if mkdir $local_depository_path
421	then
422	printf "\n\n *** directory for make depository:"
423	printf "\n $local_depository_path"
424	printf "\n was created\n"
425
426	# MAKEFILE UND QUELLTEXTDATEIEN UNTER BEIBEHALTUNG
427	# IHRES DATUMS INS VERZEICHNIS KOPIEREN
428	printf "\n *** makefile and source code files are copied to"
429	printf "\n $local_depository_path\n"
430	printf "\n copying makefile \"$makefile\" ..."
431	cp -p $makefile $local_depository_path/Makefile
432
433	# QUELLTEXTDATEIEN MUESSEN IM MAKEFILE AUFGEFUEHRT
434	# SEIN
435	for filename in $source_code_files
436	do
437	if [[ $(grep -c $filename $makefile) = 0 ]]
438	then
439	printf "\n +++ source code file:"
440	printf "\n $filename"
441	printf "\n is not listed in makefile"
442	locat=makefile; exit
443	else
444	printf "\n copying source code file \"$filename\" ..."
445	cp -p $filename $local_depository_path
446	fi
447	done
448	printf "\n"
449	else
450	printf "\n +++ directory for make depository:"
451	printf "\n $local_depository_path"
452	printf "\n cannot be created"
453	locat=local_depository_path; exit
454	fi
455	else
456
457	printf "\n *** checking file status ..."
458
459	# MAKEFILE KOPIEREN, FALLS NEUEREN DATUMS
460	if [[ $makefile -nt $local_depository_path/Makefile ]]
461	then
462	printf "\n *** update of \"$makefile\" "
463	cp -f -p $makefile $local_depository_path/Makefile
464	update=true
465
466	# PRUEFEN, OB ALLE DATEIEN IM DEPOSITORY AUCH IM NEUEN MAKEFILE
467	# VERZEICHNET SIND UND GEGEBENENFALLS DATEIEN LOESCHEN
468	cd $local_depository_path
469	source_code_files_in_depository=`ls -1 *.$suf`
470	for filename in $source_code_files_in_depository
471	do
472	if [[ $(grep -c $filename Makefile) = 0 ]]
473	then
474	printf "\n *** source code file in \"$local_depository_path\":"
475	printf "\n $filename"
476	printf "\n is not listed in makefile"
477	if [[ $silent = false ]]
478	then
479	answer=dummy
480	printf "\n\n"
481	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
482	do
483	printf " >>> delete \"$filename\" in \"$local_depository_path\" (y/n) ? "
484	read answer
485	done
486	if [[ $answer = y \|\| $answer = Y ]]
487	then
488	base=`echo $filename \| cut -d. -f2`
489	rm -f $filename
490	rm -f ${base}.o ${base}.mod
491	printf "\n *** \"$filename\" deleted in \"$local_depository_path\" "
492	else
493	printf "\n *** \"$filename\" not deleted in \"$local_depository_path\" "
494	fi
495	fi
496	fi
497	done
498	cd - > /dev/null 2>&1
499
500	elif [[ $local_depository_path/Makefile -nt $makefile ]]
501	then
502	printf "\n *** makefile in depository is newer than"
503	printf "\n \"$makefile\" "
504	if [[ $silent = false ]]
505	then
506	answer=dummy
507	printf "\n\n"
508	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
509	do
510	printf " >>> update \"$makefile\" (y/n) ? "
511	read answer
512	done
513	if [[ $answer = y \|\| $answer = Y ]]
514	then
515	cp -f -p $local_depository_path/Makefile $makefile
516	printf "\n *** \"$makefile\" updated"
517	else
518	printf "\n *** \"$makefile\" not updated"
519	fi
520	fi
521	fi
522
523	# QUELLTEXTDATEIEN KOPIEREN, FALLS NEUEREN DATUMS
524	# SIE MUESSEN IM MAKEFILE AUFGEFUEHRT SEIN
525	for filename in $source_code_files
526	do
527	if [[ $(grep -c $filename $makefile) = 0 ]]
528	then
529	printf "\n +++ source code file:"
530	printf "\n $filename"
531	printf "\n is not listed in makefile"
532	locat=makefile; exit
533	else
534	if [[ ! -f $local_depository_path/$filename ]]
535	then
536	cp -p $filename $local_depository_path
537	printf "\n *** source code file \"$filename\" created in \"$local_depository_path\" "
538	fi
539	if [[ $filename -nt $local_depository_path/$filename ]]
540	then
541	printf "\n *** update of source code file \"$filename\" "
542	cp -f -p $filename $local_depository_path
543	update=true
544	fi
545	fi
546	done
547
548
549	# PRUEFEN, OB ALLE DATEIEN IM DEPOSITORY IM AKTUELLEN ARBEITSVERZEICHNIS VORHANDEN
550	# ODER EVTL. NEUEREN DATUMS SIND
551	cd $local_depository_path
552	source_code_files_in_depository=`ls -1 *.$suf`
553	cd - > /dev/null 2>&1
554	for filename in $source_code_files_in_depository
555	do
556	if [[ ! -f $filename ]]
557	then
558	printf "\n *** source code file \"$filename\" does not exist in current directory"
559	if [[ $silent = false ]]
560	then
561	answer=dummy
562	printf "\n\n"
563	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
564	do
565	printf " >>> create \"$filename\" in current directory (y/n) ? "
566	read answer
567	done
568	if [[ $answer = y \|\| $answer = Y ]]
569	then
570	cp -p $local_depository_path/$filename $filename
571	printf "\n *** source code file \"$filename\" created in current directory"
572	else
573	printf "\n *** source code file \"$filename\" not created in current directory"
574	fi
575	fi
576	elif [[ $local_depository_path/$filename -nt $filename ]]
577	then
578	ls -al $local_depository_path/$filename
579	ls -al $filename
580	printf "\n *** source code file \"$filename\" in depository is newer than in current directory"
581	if [[ $silent = false ]]
582	then
583	answer=dummy
584	printf "\n\n"
585	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
586	do
587	printf " >>> update \"$filename\" in current directory (y/n) ? "
588	read answer
589	done
590	if [[ $answer = y \|\| $answer = Y ]]
591	then
592	cp -f -p $local_depository_path/$filename $filename
593	printf "\n *** source code file \"$filename\" updated in current directory"
594	else
595	printf "\n *** source code file \"$filename\" not updated in current directory"
596	fi
597	fi
598	fi
599	done
600
601	if [[ $update = false ]]
602	then
603	printf "\n *** no updates necessary in \"$local_depository_path\" "
604	if [[ $silent = false ]]
605	then
606	answer=dummy
607	printf "\n\n"
608	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
609	do
610	printf " >>> continue with updates on remote hosts (y/n) ? "
611	read answer
612	done
613	if [[ $answer = n \|\| $answer = N ]]
614	then
615	locat=user_abort; exit
616	fi
617	fi
618	fi
619	fi
620
621
622
623	# QUELLTEXTDATEIEN UND MAKEFILE MIT TAR ZUSAMMENBINDEN
624	# IN JEDEM FALL ALLEN DATEIEN WRITE-PERMIT GEBEN, DAMIT ES AUF
625	# DEN REMOTE-RECHNERN NICHT EVTL. ZU PROBLEMEN BEIM UEBERSCHREIBEN KOMMT
626	printf "\n\n *** tar of makefile and source files in depository ..."
627	cd $local_depository_path
628	chmod u+w Makefile *.$suf
629	tar -cf ${mainprog}_sources.tar Makefile *.$suf
630	printf "\n"
631
632	fi
633
634
635
636	# BESTAETIGUNG ZUM WEITERMACHEN EINHOLEN
637	if [[ $host = all ]]
638	then
639	printf "\n *** updates will be made for ALL hosts found in"
640	printf "\n the configuration file"
641	else
642	printf "\n *** update will be made for host \"$host\" "
643	fi
644
645	if [[ $silent = false ]]
646	then
647	answer=dummy
648	printf "\n\n"
649	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
650	do
651	printf " >>> continue (y/n) ? "
652	read answer
653	done
654	if [[ $answer = n \|\| $answer = N ]]
655	then
656	locat=user_abort; exit
657	fi
658	fi
659
660
661
662
663	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
664	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
665	printf "\n *** scanning configuration file for host(s) ..."
666
667	grep %fopts $config_file > tmp_mbuild
668	while read line
669	do
670	# KOMMENTARZEILEN UEBERSPRINGEN
671	[[ $(echo $line \| cut -c1) = "#" ]] && continue
672	(( ihost = ihost + 1 ))
673	hostline[$ihost]="$line"
674	done < tmp_mbuild
675
676
677	while (( ih < ihost ))
678	do
679
680	(( ih = ih + 1 ))
681
682	# REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
683	# NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
684	# SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
685	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
686	remote_host=`echo $remote_host_string \| cut -d" " -f1`
687	if [[ $host != all ]]
688	then
689	[[ $remote_host != $host ]] && continue
690	fi
691	host_found=true
692	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
693	if [[ $condition1 = $remote_host ]]
694	then
695	condition1=""
696	else
697	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
698	fi
699
700	netcdf_inc=""
701	netcdf_lib=""
702
703	# AUF HLRN-RECHNER NUR EINMAL UEBERSETZEN
704	if [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
705	then
706	if [[ $ibm_hb_done = true ]]
707	then
708	printf "\n *** remote host \"$remote_host\" skipped since compilation has already"
709	printf "\n been carried out on one of the HLRN machines\n"
710	continue
711	fi
712	fi
713
714	# AUF LCMUK-RECHNER NUR EINMAL UEBERSETZEN
715	if [[ $remote_host = lcmuk ]]
716	then
717	if [[ $lcmuk_done = true ]]
718	then
719	printf "\n *** local host \"$remote_host\" skipped since compilation has already"
720	printf "\n been carried out on this host\n"
721	continue
722	fi
723	fi
724
725
726	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
727	case $remote_host in
728	(lcmuk) remote_addres=130.75.105.2;;
729	(lcsgib) remote_addres=130.73.232.102;;
730	(lcsgih) remote_addres=130.75.4.102;;
731	(lctit) remote_addres=172.17.75.161;;
732	(lcxt4) remote_addres=129.177.20.113;;
733	(decalpha) remote_addres=165.132.26.56;;
734	(ibmb) remote_addres=130.73.230.10;;
735	(ibmh) remote_addres=130.75.4.10;;
736	(ibms) remote_addres=150.183.5.101;;
737	(ibmy) remote_addres=165.132.26.58;;
738	(nech) remote_addres=136.172.44.192;;
739	(neck) remote_addres=133.5.178.11;;
740	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
741	(*) if [[ $local_host != $remote_host ]]
742	then
743	printf "\n +++ remote host \"$remote_host\" unknown";
744	printf "\n please inform S. Raasch!"
745	fi;;
746	esac
747
748
749	# REMOTE-USERNAMEN ERMITTELN
750	line=""
751	found=false
752	grep "$remote_host_string" $config_file \| grep "%remote_username" > tmp_mbuild
753	while read line1
754	do
755
756	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
757	then
758	line="$line1"
759	fi
760
761	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
762	then
763	remote_username=`echo $line \| cut -d" " -s -f2`
764	found=true
765	fi
766
767	done < tmp_mbuild
768
769	if [[ $found = false ]]
770	then
771	printf "\n +++ no remote username found in configuration file"
772	printf "\n for \"$remote_host_string\" "
773	locat=config_file; exit
774	fi
775
776
777	# REMOTE-QUELLTEXTPFAD ERMITTELN
778	line=""
779	remote_source_path=""
780	grep "$remote_host_string" $config_file \| grep "%source_path" > tmp_mbuild
781	while read line1
782	do
783
784	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
785	then
786	line="$line1"
787	fi
788
789	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
790	then
791	remote_source_path=`echo $line \| cut -d" " -s -f2`
792	fi
793
794	done < tmp_mbuild
795
796	if [[ "$remote_source_path" = "" ]]
797	then
798	if [[ "$global_source_path" != "" ]]
799	then
800	remote_source_path=$global_source_path
801	else
802	printf "\n +++ no source path found in configuration file"
803	printf "\n for \"$remote_host_string\" "
804	locat=config_file; exit
805	fi
806	fi
807
808	remote_ud=${remote_source_path}/../UTIL
809	remote_ud=$(eval echo $remote_ud)
810
811
812	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
813	remote_md=""
814	line=""
815	grep "$remote_host_string" $config_file \| grep "%depository_path" > tmp_mbuild
816	while read line1
817	do
818
819	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
820	then
821	line="$line1"
822	fi
823
824	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
825	then
826	remote_md=`echo $line \| cut -d" " -s -f2`
827	fi
828
829	done < tmp_mbuild
830
831	if [[ "$remote_md" = "" ]]
832	then
833	if [[ "$global_depository_path" != "" ]]
834	then
835	remote_md=$global_depository_path
836	else
837	printf "\n +++ no depository path found in configuration file"
838	printf "\n for \"$remote_host_string\" "
839	printf "\n please set \"\%depository_path\" in configuration file"
840	locat=config_file; exit
841	fi
842	fi
843
844	remote_md=$(eval echo $remote_md)
845
846
847	# COMPILERNAMEN ERMITTELN
848	line=""
849	found=false
850	grep "$remote_host_string" $config_file \| grep "%compiler_name " > tmp_mbuild
851	while read line1
852	do
853
854	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
855	then
856	line="$line1"
857	fi
858
859	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
860	then
861	compiler_name=`echo $line \| cut -d" " -s -f2`
862	found=true
863	fi
864
865	done < tmp_mbuild
866
867	if [[ $found = false ]]
868	then
869	printf "\n +++ no compiler name found in configuration file"
870	printf "\n for \"$remote_host_string\" "
871	locat=config_file; exit
872	fi
873
874
875	# BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
876	# SERIELLER COMPILERNAME ERMITTELT WERDEN
877	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
878	then
879	line=""
880	found=false
881	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" > tmp_mbuild
882	while read line1
883	do
884
885	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
886	then
887	line="$line1"
888	fi
889
890	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
891	then
892	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
893	found=true
894	fi
895
896	done < tmp_mbuild
897
898	if [[ $found = false ]]
899	then
900	printf "\n +++ no serial compiler name found in configuration file"
901	printf "\n for \"$remote_host_string\" "
902	locat=config_file; exit
903	fi
904	else
905	compiler_name_ser=$compiler_name
906	fi
907
908
909
910	# PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
911	line=""
912	found=false
913	grep "$remote_host_string" $config_file \| grep "%cpp_options" > tmp_mbuild
914	while read line1
915	do
916
917	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
918	then
919	line="$line1"
920	fi
921
922	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
923	then
924	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
925	cpp_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
926	found=true
927	fi
928
929	done < tmp_mbuild
930
931	if [[ $found = false ]]
932	then
933	printf "\n +++ no preprocessor options found in configuration file"
934	printf "\n for \"$remote_host_string\" "
935	locat=config_file; exit
936	fi
937
938
939	# RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
940	for string in $remote_host_string
941	do
942	if [[ $(echo $remote_host \| cut -c1-2) = lc && $(echo $string \| cut -c1-2) = lc ]]
943	then
944	cpp_options="$cpp_options -D__lc "
945	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $(echo $string \| cut -c1-3) = ibm ]]
946	then
947	cpp_options="${cpp_options},-D__ibm"
948	elif [[ $(echo $remote_host \| cut -c1-3) = nec && $(echo $string \| cut -c1-3) = nec ]]
949	then
950	cpp_options="${cpp_options} -D__nec"
951	else
952	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
953	then
954	cpp_options="${cpp_options},-D__$string"
955	else
956	cpp_options="$cpp_options -D__$string "
957	fi
958	fi
959	done
960
961
962
963	# NETCDF-OPTIONEN ERMITTELN
964	line=""
965	grep "$remote_host_string" $config_file \| grep "%netcdf_inc" > tmp_mbuild
966	while read line1
967	do
968
969	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
970	then
971	line="$line1"
972	fi
973
974	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
975	then
976	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
977	netcdf_inc=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
978	fi
979
980	done < tmp_mbuild
981
982	line=""
983	grep "$remote_host_string" $config_file \| grep "%netcdf_lib" > tmp_mbuild
984	while read line1
985	do
986
987	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
988	then
989	line="$line1"
990	fi
991
992	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
993	then
994	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
995	netcdf_lib=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
996	fi
997
998	done < tmp_mbuild
999
1000
1001
1002	# COMPILEROPTIONEN ERMITTELN
1003	line=""
1004	found=false
1005	grep "$remote_host_string" $config_file \| grep "%fopts" > tmp_mbuild
1006	while read line1
1007	do
1008
1009	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
1010	then
1011	line="$line1"
1012	fi
1013
1014	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
1015	then
1016	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
1017	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
1018	found=true
1019
1020	# NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
1021	compiler_options="$compiler_options $netcdf_inc"
1022	fi
1023
1024	done < tmp_mbuild
1025
1026	if [[ $found = false ]]
1027	then
1028	printf "\n +++ no compiler options found in configuration file"
1029	printf "\n for \"$remote_host_string\" "
1030	locat=config_file; exit
1031	fi
1032
1033
1034
1035	# LADER-OPTIONEN ERMITTELN
1036	line=""
1037	found=false
1038	grep "$remote_host_string" $config_file \| grep "%lopts" > tmp_mbuild
1039	while read line1
1040	do
1041
1042	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
1043	then
1044	line="$line1"
1045	fi
1046
1047	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
1048	then
1049	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
1050	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
1051	found=true
1052
1053	# NETCDF-LIBRARY HINZUFUEGEN
1054	loader_options="$loader_options $netcdf_lib"
1055	fi
1056
1057	done < tmp_mbuild
1058
1059	if [[ $found = false ]]
1060	then
1061	printf "\n +++ no loader options found in configuration file"
1062	printf "\n for \"$remote_host_string\" "
1063	locat=config_file; exit
1064	fi
1065
1066
1067	printf "\n\n#------------------------------------------------------------------------# \n"
1068	if [[ $remote_host = $local_host ]]
1069	then
1070	column1="remote_host:"; column2="$remote_host (= local host!)"
1071	else
1072	column1="remote_host:"; column2=$remote_host
1073	fi
1074	printf "\| $column1$column2 \| \n"
1075	printf "\| \| \n"
1076	column1="conditions:"; column2="$condition1 $condition2"
1077	printf "\| $column1$column2 \| \n"
1078	column1="make depository:"; column2=$remote_md
1079	printf "\| $column1$column2 \| \n"
1080	if [[ $compile_utility_programs = true ]]
1081	then
1082	column1="utility directory:"; column2=$remote_ud
1083	printf "\| $column1$column2 \| \n"
1084	fi
1085	column1="username:"; column2=$remote_username
1086	printf "\| $column1$column2 \| \n"
1087	column1="addres:"; column2=$remote_addres
1088	printf "\| $column1$column2 \| \n"
1089	column1="compiler:"; column2=$compiler_name
1090	printf "\| $column1$column2 \| \n"
1091	if [[ $compile_utility_programs = true ]]
1092	then
1093	column1="serial compiler:"; column2=$compiler_name_ser
1094	printf "\| $column1$column2 \| \n"
1095	fi
1096	column1="cpp options:"; column2=$cpp_options
1097	printf "\| $column1$column2 \| \n"
1098	line=$(echo "$cpp_options" \| cut -c51-)
1099	while [[ "$line" != "" ]]
1100	do
1101	column1=""
1102	column2=$line
1103	printf "\| $column1$column2 \| \n"
1104	line=$(echo "$line" \| cut -c51-)
1105	done
1106	column1="compiler options:"; column2=$compiler_options
1107	printf "\| $column1$column2 \| \n"
1108	line=$(echo "$compiler_options" \| cut -c51-)
1109	while [[ "$line" != "" ]]
1110	do
1111	column1=""
1112	column2=$line
1113	printf "\| $column1$column2 \| \n"
1114	line=$(echo "$line" \| cut -c51-)
1115	done
1116	column1="loader options:"; column2=$loader_options
1117	printf "\| $column1$column2 \| \n"
1118	line=$(echo "$loader_options" \| cut -c51-)
1119	while [[ "$line" != "" ]]
1120	do
1121	column1=""
1122	column2=$line
1123	printf "\| $column1$column2 \| \n"
1124	line=$(echo "$line" \| cut -c51-)
1125	done
1126	printf "#------------------------------------------------------------------------# \n"
1127
1128	if [[ $silent = false ]]
1129	then
1130	answer=dummy
1131	printf "\n\n"
1132	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
1133	do
1134	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
1135	read answer
1136	done
1137	if [[ $answer = a \|\| $answer = A ]]
1138	then
1139	locat=user_abort; exit
1140	fi
1141	if [[ $answer = c \|\| $answer = C ]]
1142	then
1143	silent=false
1144	fi
1145	if [[ $answer = s \|\| $answer = S ]]
1146	then
1147	continue
1148	fi
1149	fi
1150
1151
1152	if [[ $remote_mode = batch ]]
1153	then
1154
1155	# BATCH-JOB PARAMETER SETZEN
1156	case $remote_host in
1157	(t3eb) queue=berte; memory=60; cputime=1000; xoption="-X 0";;
1158	(t3eh) queue=comp_t3e; memory=60; cputime=360;;
1159	(t3ej2) queue=normal; memory=60; cputime=1000; xoption="-X 0";;
1160	(t3ej5\|ground.yonsei.ac.kr) printf "\n --- remote host \"$remote_host\" does not allow batch jobs"; continue;;
1161	esac
1162
1163
1164	# BATCH-JOB ZUSAMMENSTELLEN
1165	printf "\n *** creating batch-job for remote host"
1166	echo " " > mbuild_job
1167
1168	# AUF CRAY-RECHNERN IN JUELICH WIRD KEIN BENUTZER-PROFILE AUSGEFUEHRT
1169	# DIES WIRD HIER GETAN, UM PFADE USW. ZU SETZEN
1170	if [[ $remote_host = t3ej2 ]]
1171	then
1172	echo "set +vx" >> mbuild_job
1173	echo ". .profile" >> mbuild_job
1174	echo "set -x" >> mbuild_job
1175	fi
1176
1177	# AUF CRAY-RECHNERN GELADENE MODULE AUFLISTEN
1178	if [[ $host = t3eb \|\| $host = t3eh \|\| $host = t3ej2 ]]
1179	then
1180	echo "module list" >> mbuild_job
1181	fi
1182
1183
1184	# WECHSEL IN TEMPORAERES VERZEICHNIS
1185	echo "cd ${remote_md}" >> mbuild_job
1186
1187
1188	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1189	echo "scp ${local_username}@${local_addres}:~/modell/code_3dp/palm_current_version/${mainprog}_sources.tar ${mainprog}_sources.tar" >> mbuild_job
1190	# echo "[[ \$? != 0 ]] && (echo "+++ scp failed"; exit)" >> mbuild_job
1191
1192
1193	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
1194	echo "[[ -f ${mainprog}_current_version.tar ]] && tar -xvf ${mainprog}_current_version.tar" >> mbuild_job
1195
1196
1197	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1198	echo "tar -xvf ${mainprog}_sources.tar" >> mbuild_job
1199
1200
1201	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1202	echo "make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " >> mbuild_job
1203	echo "chmod u+w *" >> mbuild_job
1204
1205	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1206	echo "tar -cvf ${mainprog}_current_version.tar .f90 .o" >> mbuild_job
1207
1208
1209	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1210	echo "make clean" >> mbuild_job
1211	echo "rm ${mainprog}_sources.tar" >> mbuild_job
1212	echo "rm *.f90 Makefile" >> mbuild_job
1213
1214
1215
1216	# JOB MITTELS SUBJOB STARTEN
1217	printf "\n *** sending batch job to remote host"
1218	# subjob $xoption -h $remote_host -q $queue -m $memory -t $cputime -v mbuild_job
1219
1220
1221	# JOBFILE LOESCHEN
1222	# rm aljob
1223
1224	else
1225
1226	if [[ $remote_host != $local_host ]]
1227	then
1228
1229	if [[ $compile_utility_programs = false ]]
1230	then
1231
1232	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1233	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1234	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
1235	if [[ $remote_host != lctit ]]
1236	then
1237	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
1238	else
1239	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1240	# MIT SSH, DESHALB AUFRUF PER PIPE
1241	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
1242	fi
1243	if [[ $local_host = decalpha ]]
1244	then
1245	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1246	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1247	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1248	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
1249	/bin/scp ${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1250	else
1251	scp ${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1252	fi
1253
1254
1255
1256	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
1257	echo " *** untar previous update on remote host, if existing"
1258	if [[ $remote_host != lctit ]]
1259	then
1260	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
1261	else
1262	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1263	# MIT SSH, DESHALB AUFRUF PER PIPE
1264	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1265	fi
1266
1267
1268	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1269	echo " *** untar actual sources on remote host"
1270	if [[ $remote_host != lctit ]]
1271	then
1272	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
1273	else
1274	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1275	# MIT SSH, DESHALB AUFRUF PER PIPE
1276	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1277	fi
1278
1279
1280	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1281	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1282	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1283	# Z.B. DIE PFADE ZUM COMPILER)
1284	echo " *** execute \"make\" on remote host"
1285
1286	if [[ $remote_host = nech ]]
1287	then
1288	make_call_string="sxmake PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1289	else
1290	make_call_string="make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1291	fi
1292
1293	if [[ $remote_host = t3eh ]]
1294	then
1295
1296	print "xterm\nexit\n cd ${remote_md}; make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1297
1298	elif [[ $remote_host = t3ej2 \|\| $remote_host = ibms \|\| $remote_host = ibmy ]]
1299	then
1300
1301	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1302
1303	elif [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
1304	then
1305
1306	print "export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1307
1308	elif [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
1309	then
1310
1311	print ". /usr/share/modules/init/bash; module load mpt; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1312	# print ". /usr/share/modules/init/bash; module load mvapich2/1.2rc1-intel; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1313	# print ". /usr/share/modules/init/bash; module load mvapich2; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1314
1315	elif [[ $remote_host = lctit ]]
1316	then
1317
1318	echo " " > ${remote_host}_last_make_protokoll
1319	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1320	do
1321	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1322	done
1323
1324	elif [[ $remote_host = lcxt4 ]]
1325	then
1326
1327	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1328
1329	else
1330
1331	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1332
1333	fi
1334
1335	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
1336	then
1337	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1338	if [[ $silent = false ]]
1339	then
1340	answer=dummy
1341	printf "\n"
1342	while [[ "$answer" != c && "$answer" != k ]]
1343	do
1344	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1345	read answer
1346	if [[ "$answer" = l ]]
1347	then
1348	more ${remote_host}_last_make_protokoll
1349	fi
1350	done
1351	if [[ $answer = k ]]
1352	then
1353	locat=user_abort; exit
1354	fi
1355	fi
1356	fi
1357
1358
1359
1360	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1361	printf "\n *** tar update on remote host ..."
1362	if [[ $remote_host != lctit ]]
1363	then
1364	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod"
1365	else
1366	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1367	# MIT SSH, DESHALB AUFRUF PER PIPE
1368	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
1369	fi
1370
1371
1372	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1373	# printf "\n *** \"make clean\" on remote host ..."
1374	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
1375	# printf "\n"
1376
1377
1378
1379
1380	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
1381	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1382	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1383	elif [[ $compile_utility_programs = true ]]
1384	then
1385
1386	printf "\n\n"
1387	echo " *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
1388	cd ${local_source_path}/../SCRIPTS
1389
1390	if [[ $remote_host != lctit ]]
1391	then
1392	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
1393	else
1394	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1395	# MIT SSH, DESHALB AUFRUF PER PIPE
1396	print "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_addres} 2>&1
1397	fi
1398
1399	# KOPIEREN DER SCRIPTE
1400	if [[ $local_host = decalpha ]]
1401	then
1402	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1403	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1404	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1405	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1406	/bin/scp batch_scp mbuild mrun subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1407	else
1408	scp batch_scp mbuild mrun subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1409	fi
1410
1411	cd - > /dev/null
1412	cd ${local_source_path}/../UTIL
1413
1414
1415	# KOPIEREN DER UTILITY-PROGRAMME
1416	if [[ $local_host = decalpha ]]
1417	then
1418	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1419	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1420	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1421	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1422	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1423	else
1424	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1425	fi
1426
1427
1428
1429	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1430	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1431	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1432	# Z.B. DIE PFADE ZUM COMPILER)
1433	echo " *** execute \"make\" on remote host"
1434
1435	if [[ $remote_host = nech ]]
1436	then
1437	make_call_string="sxmake F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1438	else
1439	make_call_string="make F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1440	fi
1441
1442	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
1443	then
1444
1445	ssh ${remote_username}@${remote_addres} "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
1446
1447	elif [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
1448	then
1449
1450	print "export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres}
1451
1452	elif [[ $remote_host = lctit ]]
1453	then
1454
1455	echo " " > ${remote_host}_last_make_protokoll
1456	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1457	do
1458	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1459	done
1460
1461	else
1462
1463	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1464
1465	fi
1466
1467	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
1468
1469	rm -rf ${remote_host}_last_make_protokoll
1470
1471	# NUR AUF EINEM HLRN-RECHNER UEBERSETZEN
1472	[[ $remote_host = ibmb \|\| $remote_host = ibmh ]] && ibm_hb_done=true
1473
1474	else
1475
1476	if [[ $compile_utility_programs = false ]]
1477	then
1478
1479	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
1480	echo " "
1481	echo " *** execute \"make\" on local host"
1482
1483	make PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
1484
1485	if [[ $? != 0 ]]
1486	then
1487	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1488	if [[ $silent = false ]]
1489	then
1490	answer=dummy
1491	printf "\n"
1492	while [[ "$answer" != c && "$answer" != k ]]
1493	do
1494	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1495	read answer
1496	if [[ "$answer" = l ]]
1497	then
1498	more ${remote_host}_last_make_protokoll
1499	fi
1500	done
1501	if [[ $answer = k ]]
1502	then
1503	locat=user_abort; exit
1504	fi
1505	fi
1506	fi
1507
1508
1509	# NEUE VERSION AUF LOKALEM RECHNER ZUSAMMENPACKEN
1510	printf "\n *** tar update on local host ..."
1511	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
1512
1513
1514	# COMPILE THE UTILITY PROGRAMS
1515	elif [[ $compile_utility_programs = true ]]
1516	then
1517	printf "\n\n"
1518	echo " *** compiling the utility programs ..."
1519	cd ${local_source_path}/../UTIL
1520	make F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
1521	cd - > /dev/null
1522	fi
1523
1524
1525	# NUR EINMAL AUF LCMUK UEBERSETZEN
1526	[[ $remote_host = lcmuk ]] && lcmuk_done=true
1527
1528	fi
1529
1530	fi
1531	done
1532
1533
1534	if [[ $host_found = false ]]
1535	then
1536	if [[ $host = all ]]
1537	then
1538	printf "\n +++ no hosts found in configuration file"
1539	else
1540	printf "\n +++ host \"$host\" not found in configuration file"
1541	fi
1542	locat=config_file; exit
1543	fi
1544
1545
1546
1547	# ABSCHLIESSENDE ARBEITEN
1548	rm -f hosts_found_in_config_file
1549

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |