Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 1620

Last change on this file since 1620 was 1620, checked in by heinze, 9 years ago
adjustments for Mistral at DKRZ Hamburg (lcbullhh)
Property svn:keywords set to `Id Rev`
File size: 48.6 KB

Line
1	#!/bin/bash
2
3	# mbuild - script for compiling the PALM code and its utility programs
4
5	#--------------------------------------------------------------------------------#
6	# This file is part of PALM.
7	#
8	# PALM is free software: you can redistribute it and/or modify it under the terms
9	# of the GNU General Public License as published by the Free Software Foundation,
10	# either version 3 of the License, or (at your option) any later version.
11	#
12	# PALM is distributed in the hope that it will be useful, but WITHOUT ANY
13	# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
14	# A PARTICULAR PURPOSE. See the GNU General Public License for more details.
15	#
16	# You should have received a copy of the GNU General Public License along with
17	# PALM. If not, see <http://www.gnu.org/licenses/>.
18	#
19	# Copyright 1997-2014 Leibniz Universitaet Hannover
20	#--------------------------------------------------------------------------------#
21	#
22	# Current revisions:
23	# ------------------
24	# adjustments for Mistral at DKRZ Hamburg (lcbullhh)
25	#
26	# Former revisions:
27	# -----------------
28	# $Id: mbuild 1620 2015-07-17 11:37:41Z heinze $
29	#
30	# 1613 2015-07-08 14:53:29Z maronga
31	# nc2vdf removed
32	#
33	# 1547 2015-01-29 15:09:12Z witha
34	# adjustments for ForWind computing cluster (lcflow)
35	#
36	# 1487 2014-10-25 14:36:28Z raasch
37	# bash compatibility adjustments: output formatting with printf instead
38	# of "typeset -L/-R", print replaced by echo
39	#
40	# 1468 2014-09-24 14:06:57Z maronga
41	# Typo removed (addres->address)
42	# Adjustments for lcxe6
43	#
44	# 1390 2014-05-06 07:57:37Z maronga
45	# disabled compilation of parameter file check (currently not working),
46	# adjustments for lcxe6
47	#
48	# 1388 2014-05-06 07:42:38Z maronga
49	# small adjustments for lcxe6
50	#
51	# 1350 2014-04-04 13:01:30Z maronga
52	# init_cmds is now executed before module calls in case of compilation on local
53	# host
54	#
55	# 1289 2014-03-04 07:12:34Z raasch
56	# comments translated from German to English
57	# fimm-, scirocco-, ibmy-, and sgi-specific code removed
58	#
59	# 1274 2014-01-09 13:14:54Z heinze
60	# adjustments for lccrayh
61	#
62	# 1255 2013-11-07 14:43:35Z raasch
63	# further adjustments for lccrayb remote access
64	#
65	# 1229 2013-09-20 06:55:19Z raasch
66	# adjustments for lccrayb
67	#
68	# 1216 2013-08-26 09:31:42Z raasch
69	# RCS renamed SOURCES
70	#
71	# 1210 2013-08-14 10:58:20Z raasch
72	# fftw support added
73	#
74	# 1197 2013-07-04 06:19:45Z raasch
75	# adjustments for CSC Helsinki (lccrayf)
76	#
77	# 1099 2013-02-10 01:47:43Z raasch
78	# adjustments for Forwind cluster (lcflow)
79	#
80	# 1096 2013-02-03 01:52:12Z raasch
81	# decalpha parts (yonsei) removed
82	#
83	# 2013-02-02 07:06:13Z raasch
84	# adjustments for Kyushu-University computing center (lckyut)
85	# old changelog messages removed
86	#
87	# 1083 2013-01-04 10:22:09Z maronga
88	# bugfix in parameter file check (in case that no preprocessor flag, i.e. -cpp was
89	# set in %cpp_options, the last directive in the variable was processed.
90	#
91	# 1081 2013-01-03 08:44:36Z maronga
92	# loader options set for parameter file check_depository_path
93	#
94	# 1069 2012-11-28 16:18:43Z maronga
95	# added copy of nc2vdf tools to remote host_found
96	#
97	# 1046 2012-11-09 14:38:45Z maronga
98	# code put under GPL (PALM 3.9)
99	#
100	# 12/06/02 - Siggi - first version finished
101	# 06/05/02 - Siggi - script development started
102	#
103	#--------------------------------------------------------------------------------#
104	# mbuild - script for compiling the PALM code and its utility programs
105	#
106	# Procedure to compile code on local and remote hosts using the
107	# make-mechanism. The source code must be provided on the local host.
108	#--------------------------------------------------------------------------------#
109
110
111	# VARIABLE DECLARATIONS + DEFAULT VALUES
112	block_conditions=none
113	block_conditions_found=false
114	calltime=""
115	column1=""
116	column2=""
117	compile_utility_programs=false
118	config_file=.mrun.config
119	host=all
120	host_found=false
121	locat=normal
122	makefile=""
123	module_calls=""
124	util_compiled_localhost=false
125	silent=false
126	suf=f90
127	update=false
128	version="MBUILD 2.1 Rev$Rev: 1620 $"
129	working_directory=`pwd`
130
131	typeset -i ih ihost=0
132
133
134	# ERROR HANDLING
135	# IN CASE OF EXIT:
136	trap 'rm -rf $working_directory/tmp_mbuild
137	if [[ $locat != normal ]]
138	then
139	printf "\n\n +++ mbuild killed \n\n"
140	else
141	printf "\n\n *** mbuild finished \n\n"
142	fi' exit
143
144
145	# IN CASE OF TERMINAL-BREAK:
146	trap 'rm -rf $working_directory/tmp_mbuild
147	printf "\n\n +++ mbuild killed by \"^C\" \n\n"
148	exit
149	' 2
150
151
152	tmp_mbuild=${working_directory}/tmp_mbuild
153
154	# READ SHELLSCRIPT-OPTIONS
155	while getopts :c:h:K:m:s:uv option
156	do
157	case $option in
158	(c) config_file=$OPTARG;;
159	(h) host=$OPTARG;;
160	(K) block_conditions=$OPTARG;;
161	(m) makefile=$OPTARG;;
162	(s) suf=$OPTARG;;
163	(u) compile_utility_programs=true;;
164	(v) silent=true;;
165	(\?) printf "\n +++ unknown option $OPTARG \n";
166	locat=parameter; exit;;
167	esac
168	done
169
170
171
172	# CHECK, IF CONFIGURATION-FILE EXISTS
173	if [[ ! -f $config_file ]]
174	then
175	printf "\n +++ configuration file: "
176	printf "\n $config_file"
177	printf "\n does not exist"
178	locat=configuration; exit
179	fi
180
181
182
183	# DETERMINE THE LOCAL HOST
184	local_host_real_name=$(hostname)
185	local_address=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{echo $2}')
186
187
188
189	# DETERMINE HOST-IDENTIFIER (local_host) FROM THE CONFIG-FILE
190	line=""
191	grep "%host_identifier" $config_file > $tmp_mbuild
192	while read line
193	do
194	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
195	then
196	HOSTNAME=`echo $line \| cut -d" " -s -f2`
197	host_identifier=`echo $line \| cut -d" " -s -f3`
198	if [[ $local_host_real_name = $HOSTNAME ]]
199	then
200	local_host=$host_identifier
201	break
202	fi
203	fi
204	done < $tmp_mbuild
205
206	if [[ "$local_host" = "" ]]
207	then
208	printf "\n +++ no host identifier found in configuration file \"$config_file\""
209	printf "\n for local host \"$local_host_real_name\"."
210	printf "\n Please add line"
211	printf "\n \"\%host_identifier $local_host_real_name <identifier>\""
212	printf "\n to the configuration file."
213	locat=local_host; exit
214	fi
215
216
217	if [[ $local_host != ibms ]]
218	then
219	config_file=$PWD/$config_file
220	else
221	config_file=`pwd`/$config_file
222	fi
223
224
225	# DETERMINE THE BLOCK CONDITIONS
226	if [[ $block_conditions != none ]]
227	then
228	block_condition1=`echo $block_conditions \| cut -d" " -f1`
229	block_condition2=`echo $block_conditions \| cut -d" " -f2`
230	if [[ "$block_condition2" = "$block_condition1" ]]
231	then
232	block_condition2=""
233	fi
234	fi
235
236
237	# DETERMINE USER NAME ON LOCAL HOST FROM THE CONFIG-FILE
238	line=""
239	grep " $local_host" $config_file \| grep "%remote_username" > $tmp_mbuild
240	while read line
241	do
242	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
243	then
244	local_username=`echo $line \| cut -d" " -s -f2`
245	fi
246	done < $tmp_mbuild
247
248
249	if [[ "$local_username" = "" ]]
250	then
251	printf "\n +++ no user name found in configuration file"
252	printf "\n for local host \"$local_host\" "
253	locat=config_file; exit
254	fi
255
256
257	# DETERMINE LOCAL SOURCE-CODE PATH.
258	# FIRST CHECK, IF A GLOBAL SOURCE-CODE PATH HAS BEEN DECLARED FOR ALL HOSTS.
259	# THEREFORE, FIRST SET ALL GLOBAL VARIABLES DECLARED IN THE CONFIG-FILE,
260	# BECAUSE THEY MAY BE USED AS PART OF THE PATH NAME.
261	line=""
262	grep "%" $config_file > $tmp_mbuild
263	while read line
264	do
265	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" && $(echo $line \| cut -c1) != "#" ]]
266	then
267	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
268	value=`echo $line \| cut -d" " -s -f2`
269	eval export $var=\$value
270	fi
271	done < $tmp_mbuild
272
273	# NOW CHECK, IF A GLOBAL SOURCE-CODE-PATH HAS BEEN DECLARED
274	line=""
275	grep "%source_path" $config_file > $tmp_mbuild
276	while read line
277	do
278	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
279	then
280	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
281	then
282	global_source_path=`echo $line \| cut -d" " -s -f2`
283	fi
284	fi
285	done < $tmp_mbuild
286
287	line=""
288	grep " $local_host" $config_file \| grep "%source_path" > $tmp_mbuild
289	while read line
290	do
291	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
292	then
293	local_source_path=`echo $line \| cut -d" " -s -f2`
294	fi
295	done < $tmp_mbuild
296
297	if [[ "$local_source_path" = "" ]]
298	then
299	if [[ "$global_source_path" != "" ]]
300	then
301	local_source_path=$global_source_path
302	else
303	printf "\n +++ no source path found in configuration file"
304	printf "\n for local host \"$local_host\" "
305	printf "\n please set \"\%source_path\" in configuration file"
306	locat=config_file; exit
307	fi
308	fi
309	eval local_source_path=$local_source_path
310	eval local_source_path=$local_source_path
311
312
313
314	# DETERMINE GLOBAL DEPOSITORY-PATH
315	line=""
316	grep "%depository_path" $config_file > $tmp_mbuild
317	while read line
318	do
319	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
320	then
321	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
322	then
323	global_depository_path=`echo $line \| cut -d" " -s -f2`
324	fi
325	fi
326	done < $tmp_mbuild
327
328	if [[ $found = false ]]
329	then
330	printf "\n +++ no \%depository_path found in"
331	printf "\n $config_file"
332	locat=depository_path; exit
333	fi
334
335	# CHECK, IF A MAIN PROGRAM HAS BEEN DEFINED IN THE CONFIG-FILE
336	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
337	then
338	printf "\n +++ no main program or more than one main program defined"
339	printf "\n in configuration file"
340	locat=configuration; exit
341	else
342	line=`grep "%mainprog" $config_file`
343	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
344	then
345	printf "\n +++ no main program defined in configuration file"
346	locat=configuration; exit
347	fi
348	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
349	fi
350
351
352
353	# CHECK IF MAKEFILE EXITS
354	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
355	if [[ ! -f $makefile ]]
356	then
357	printf "\n +++ makefile: "
358	printf "\n $makefile"
359	printf "\n does not exist"
360	locat=makefile; exit
361	fi
362
363
364	# HEADER-OUTPUT (PART1: MESSAGES CONCERNING THE LOCAL HOST)
365	calltime=$(date)
366	printf "\n"
367	printf "#------------------------------------------------------------------------# \n"
368	printf "\| %-40s%30s \| \n" "$version" "$calltime"
369	printf "\| \| \n"
370	printf "\| %-20s%-50s \| \n" "called on:" "$local_host_real_name"
371	printf "\| %-20s%-50s \| \n" "local username:" "$local_username"
372	printf "\| %-20s%-50s \| \n" "local IP-address:" "$local_address"
373	column2=$(echo $config_file \| cut -c1-50 )
374	printf "\| %-20s%-50s \| \n" "config file:" "$column2"
375	line=$(echo "$config_file" \| cut -c51-)
376	while [[ "$line" != "" ]]
377	do
378	column1=""
379	column2=$(echo $line \| cut -c1-50 )
380	printf "\| %-20s%-50s \| \n" "$column1" "$column2"
381	line=$(echo "$line" \| cut -c51-)
382	done
383	column2=$(echo $makefile \| cut -c1-50 )
384	printf "\| %-20s%-50s \| \n" "makefile:" "$column2"
385	line=$(echo "$makefile" \| cut -c51-)
386	while [[ "$line" != "" ]]
387	do
388	column1=""
389	column2=$(echo $line \| cut -c1-50 )
390	printf "\| %-20s%-50s \| \n" "$column1" "$column2"
391	line=$(echo "$line" \| cut -c51-)
392	done
393	column2=$(echo $local_source_path \| cut -c1-50 )
394	printf "\| %-20s%-50s \| \n" "local source path:" "$column2"
395	line=$(echo "$local_source_path" \| cut -c51-)
396	while [[ "$line" != "" ]]
397	do
398	column1=""
399	column2=$(echo $line \| cut -c1-50 )
400	printf "\| %-20s%-50s \| \n" "$column1" "$column2"
401	line=$(echo "$line" \| cut -c51-)
402	done
403	printf "#------------------------------------------------------------------------# \n"
404
405
406	if [[ $compile_utility_programs = false ]]
407	then
408
409	# IN ANY CASE, GIVE ALL FILES WRITE-PERMIT, IN ORDER TO AVOID PROBLEMS
410	# WITH OVERWRITING FILES ON THE REMOTE HOST
411	cd $local_source_path
412	printf "\n\n *** tar of makefile and source files in $local_source_path"
413	tar -cf ${mainprog}_sources.tar Makefile *.$suf
414	printf "\n"
415
416	else
417	cd $local_source_path
418	printf "\n\n *** tar of makefile and source files in $local_source_path"
419
420	cat Makefile_check\|while read line
421	do
422	line=$(echo $line\|grep SOURCES)
423	if [[ $line == "SOURCES" ]]
424	then
425	line=$(echo $line\|sed 's/SOURCES = //g')
426	break
427	fi
428	done
429
430	tar -cf ${mainprog}_sources_check.tar Makefile_check $line
431	printf "\n"
432	fi
433
434
435
436	# GET CONFIRMATION TO CONTINUE
437	if [[ $host = all ]]
438	then
439	printf "\n *** updates will be made for ALL hosts found in"
440	printf "\n the configuration file"
441	else
442	printf "\n *** update will be made for host \"$host\" "
443	fi
444
445	if [[ $silent = false ]]
446	then
447	answer=dummy
448	printf "\n\n"
449	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
450	do
451	printf " >>> continue (y/n) ? "
452	read answer
453	done
454	if [[ $answer = n \|\| $answer = N ]]
455	then
456	locat=user_abort; exit
457	fi
458	fi
459
460
461
462
463	# GENERATE MODEL-VERSIONS FOR ALL HOST-BLOCKS
464	# FOUND IN THE CONFIGURATION-FILE
465	printf "\n *** scanning configuration file for host(s) ..."
466
467	grep %fopts $config_file > $tmp_mbuild
468	while read line
469	do
470	# SKIP COMMENT-LINES
471	[[ $(echo $line \| cut -c1) = "#" ]] && continue
472	(( ihost = ihost + 1 ))
473	hostline[$ihost]="$line"
474	done < $tmp_mbuild
475
476
477	while (( ih < ihost ))
478	do
479
480	(( ih = ih + 1 ))
481
482	# DETERMINE REMOTE HOST AND CONDITIONS FOR THE RESPECTIVE BLOCK
483	# CONTINUE, ONLY IF THIS HOST HAS BEEN CHOSEN VIA -h OPTION AND IF
484	# CONDITIONS HAVE BEEN CHOSEN VIA -K OPTION
485	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
486	remote_host=`echo $remote_host_string \| cut -d" " -f1`
487	if [[ $host != all ]]
488	then
489	[[ $remote_host != $host ]] && continue
490	fi
491	host_found=true
492	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
493	if [[ $condition1 = $remote_host ]]
494	then
495	condition1=""
496	else
497	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
498	fi
499
500	if [[ $block_conditions != none ]]
501	then
502	if [[ "$condition1" != "$block_condition1" \|\| "$condition2" != "$block_condition2" ]]
503	then
504	continue
505	fi
506	block_conditions_found=true
507	fi
508
509	fftw_inc=""
510	fftw_lib=""
511	modules=""
512	netcdf_inc=""
513	netcdf_lib=""
514	make_options=""
515
516	# DETERMINE IP-ADDRES OF THE REMOTE-HOST
517	case $remote_host in
518	(lcbullhh) remote_address=136.172.50.13;;
519	(lccrayb) remote_address=130.73.233.1;;
520	(lccrayh) remote_address=130.75.4.1;;
521	(lcflow) remote_address="flow02.hpc.uni-oldenburg.de";;
522	(lckordi) remote_adress=210.219.61.8;;
523	(lcmuk) remote_address=130.75.105.2;;
524	(lcrte) remote_address=133.5.185.60;;
525	(lcsb) remote_address=147.46.30.151;;
526	(lck) remote_address=165.132.26.61;;
527	(lckiaps) remote_address=118.128.66.223;;
528	(lckyut) remote_address=133.5.4.37;;
529	(lctit) remote_address=10.1.6.170;;
530	(lcxe6) remote_address=129.177.20.113;;
531	(lcxt5m) remote_address=193.166.211.144;;
532	(ibmh) remote_address=136.172.40.15;;
533	(ibmkisti) remote_address=150.183.146.24;;
534	(ibmku) remote_address=133.5.4.129;;
535	(ibms) remote_address=150.183.5.101;;
536	(nech) remote_address=136.172.44.192;;
537	(neck) remote_address=133.5.178.11;;
538	(ground.yonsei.ac.kr) remote_address=134.75.155.33;;
539	(*) if [[ $local_host != $remote_host ]]
540	then
541	printf "\n +++ remote host \"$remote_host\" unknown";
542	printf "\n please inform PALM group support!"
543	locat=remote_host; exit
544	fi;;
545	esac
546
547
548	# DETERMINE REMOTE-USERNAME
549	line=""
550	found=false
551	grep "$remote_host_string" $config_file \| grep "%remote_username" > $tmp_mbuild
552	while read line1
553	do
554
555	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
556	then
557	line="$line1"
558	fi
559
560	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
561	then
562	remote_username=`echo $line \| cut -d" " -s -f2`
563	found=true
564	fi
565
566	done < $tmp_mbuild
567
568	if [[ $found = false ]]
569	then
570	printf "\n +++ no remote username found in configuration file"
571	printf "\n for \"$remote_host_string\" "
572	locat=config_file; exit
573	fi
574
575
576	# DETERMINE REMOTE-SOURCE-CODE-PATH
577	line=""
578	remote_source_path=""
579	grep "$remote_host_string" $config_file \| grep "%source_path" > $tmp_mbuild
580	while read line1
581	do
582
583	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
584	then
585	line="$line1"
586	fi
587
588	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
589	then
590	remote_source_path=`echo $line \| cut -d" " -s -f2`
591	fi
592
593	done < $tmp_mbuild
594
595	if [[ "$remote_source_path" = "" ]]
596	then
597	if [[ "$global_source_path" != "" ]]
598	then
599	remote_source_path=$global_source_path
600	else
601	printf "\n +++ no source path found in configuration file"
602	printf "\n for \"$remote_host_string\" "
603	locat=config_file; exit
604	fi
605	fi
606
607	remote_ud=${remote_source_path}/../UTIL
608	remote_ud=$(eval echo $remote_ud)
609
610
611	# DETERMINE REMOTE-PATH FOR MAKE-DEPOSITORY
612	remote_md=""
613	line=""
614	grep "$remote_host_string" $config_file \| grep "%depository_path" > $tmp_mbuild
615	while read line1
616	do
617
618	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
619	then
620	line="$line1"
621	fi
622
623	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
624	then
625	remote_md=`echo $line \| cut -d" " -s -f2`
626	fi
627
628	done < $tmp_mbuild
629
630	if [[ "$remote_md" = "" ]]
631	then
632	if [[ "$global_depository_path" != "" ]]
633	then
634	remote_md=$global_depository_path
635	else
636	printf "\n +++ no depository path found in configuration file"
637	printf "\n for \"$remote_host_string\" "
638	printf "\n please set \"\%depository_path\" in configuration file"
639	locat=config_file; exit
640	fi
641	fi
642
643	remote_md=$(eval echo $remote_md)
644	block=""
645	[[ "$condition1" != "" ]] && block=_$condition1
646	[[ "$condition2" != "" ]] && block=${block}_$condition2
647	remote_md=${remote_md}$block
648
649
650	# DETERMINE COMPILERNAME
651	line=""
652	found=false
653	grep "$remote_host_string" $config_file \| grep "%compiler_name " > $tmp_mbuild
654	while read line1
655	do
656
657	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
658	then
659	line="$line1"
660	fi
661
662	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
663	then
664	compiler_name=`echo $line \| cut -d" " -s -f2`
665	found=true
666	fi
667
668	done < $tmp_mbuild
669
670	if [[ $found = false ]]
671	then
672	printf "\n +++ no compiler name found in configuration file"
673	printf "\n for \"$remote_host_string\" "
674	locat=config_file; exit
675	fi
676
677
678	# IN CASE OF PARALLEL EXECUTION (COMPILER FOR PARALLEL EXECUTION),
679	# A SERIAL COMPILERNAME MUST BE DETERMINED ALSO
680	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
681	then
682	line=""
683	found=false
684	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" > $tmp_mbuild
685	while read line1
686	do
687
688	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
689	then
690	line="$line1"
691	fi
692
693	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
694	then
695	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
696	found=true
697	fi
698
699	done < $tmp_mbuild
700
701	if [[ $found = false ]]
702	then
703	printf "\n +++ no serial compiler name found in configuration file"
704	printf "\n for \"$remote_host_string\" "
705	locat=config_file; exit
706	fi
707	else
708	compiler_name_ser=$compiler_name
709	fi
710
711
712
713	# DETERMINE PREPROCESSOR-OPTIONS AND DIRECTIVES
714	line=""
715	found=false
716	grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
717	while read line1
718	do
719
720	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
721	then
722	line="$line1"
723	fi
724
725	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
726	then
727	# REMOVE COLONS FROM THE OPTION-STRING, IF THERE ARE ANY
728	cpp_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
729	found=true
730	fi
731
732	done < $tmp_mbuild
733
734	if [[ $found = false ]]
735	then
736	printf "\n +++ no preprocessor options found in configuration file"
737	printf "\n for \"$remote_host_string\" "
738	locat=config_file; exit
739	fi
740
741
742	# ADD HOST-SPECIFIC PREPROCESSOR-DIRECTIVES
743	for string in $remote_host_string
744	do
745	if [[ $(echo $remote_host \| cut -c1-2) = lc && $(echo $string \| cut -c1-2) = lc ]]
746	then
747	cpp_options="$cpp_options -D__lc "
748	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $(echo $string \| cut -c1-3) = ibm ]]
749	then
750	cpp_options="${cpp_options},-D__ibm"
751	elif [[ $(echo $remote_host \| cut -c1-3) = nec && $(echo $string \| cut -c1-3) = nec ]]
752	then
753	cpp_options="${cpp_options} -D__nec"
754	else
755	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
756	then
757	cpp_options="${cpp_options},-D__$string"
758	else
759	cpp_options="$cpp_options -D__$string "
760	fi
761	fi
762	done
763
764
765
766	# GET netCDF OPTIONS
767	line=""
768	grep "$remote_host_string" $config_file \| grep "%netcdf_inc" > $tmp_mbuild
769	while read line1
770	do
771
772	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
773	then
774	line="$line1"
775	fi
776
777	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
778	then
779	# REMOVE COLONS FROM THE OPTION-STRING, IF THERE ARE ANY
780	netcdf_inc=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
781	fi
782
783	done < $tmp_mbuild
784
785	line=""
786	grep "$remote_host_string" $config_file \| grep "%netcdf_lib" > $tmp_mbuild
787	while read line1
788	do
789
790	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
791	then
792	line="$line1"
793	fi
794
795	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
796	then
797	# REMOVE COLONS FROM THE OPTION-STRING, IF THERE ARE ANY
798	netcdf_lib=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
799	fi
800
801	done < $tmp_mbuild
802
803
804
805	# GET FFTW OPTIONS
806	line=""
807	grep "$remote_host_string" $config_file \| grep "%fftw_inc" > $tmp_mbuild
808	while read line1
809	do
810
811	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
812	then
813	line="$line1"
814	fi
815
816	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
817	then
818	# REMOVE COLONS FROM THE OPTION-STRING, IF THERE ARE ANY
819	fftw_inc=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
820	fi
821
822	done < $tmp_mbuild
823
824	line=""
825	grep "$remote_host_string" $config_file \| grep "%fftw_lib" > $tmp_mbuild
826	while read line1
827	do
828
829	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
830	then
831	line="$line1"
832	fi
833
834	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
835	then
836	# REMOVE COLONS FROM THE OPTION-STRING, IF THERE ARE ANY
837	fftw_lib=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
838	fi
839
840	done < $tmp_mbuild
841
842
843
844	# GET MAKE OPTIONS
845	line=""
846	found=false
847	grep "$remote_host_string" $config_file \| grep "%mopts" > $tmp_mbuild
848	while read line1
849	do
850
851	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
852	then
853	line="$line1"
854	fi
855
856	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
857	then
858	# REMOVE COLONS FROM THE OPTION-STRING, IF THERE ARE ANY
859	make_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
860
861	fi
862
863	done < $tmp_mbuild
864
865
866
867	# GET COMPILER OPTIONS
868	line=""
869	found=false
870	grep "$remote_host_string" $config_file \| grep "%fopts" > $tmp_mbuild
871	while read line1
872	do
873
874	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
875	then
876	line="$line1"
877	fi
878
879	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
880	then
881	# REMOVE COLONS FROM THE OPTION-STRING, IF THERE ARE ANY
882	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
883	found=true
884
885	# ADD INCLUDE PATHS FOR netCDF AND FFTW
886	compiler_options="$compiler_options $netcdf_inc $fftw_inc"
887	fi
888
889	done < $tmp_mbuild
890
891	if [[ $found = false ]]
892	then
893	printf "\n +++ no compiler options found in configuration file"
894	printf "\n for \"$remote_host_string\" "
895	locat=config_file; exit
896	fi
897
898
899	# GET LOGIN INIT COMMANDS
900	line=""
901	grep "$remote_host_string" $config_file \| grep "%login_init_cmd" > $tmp_mbuild
902	while read line1
903	do
904
905	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
906	then
907	line="$line1"
908	fi
909
910	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
911	then
912	# REMOVE COLONS FROM THE OPTION-STRING, IF THERE ARE ANY
913	init_cmds=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
914	init_cmds="${init_cmds};"
915	fi
916	done < $tmp_mbuild
917
918
919	# GET MODULES TO BE LOADED
920	line=""
921	grep "$remote_host_string" $config_file \| grep "%modules" > $tmp_mbuild
922	while read line1
923	do
924
925	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
926	then
927	line="$line1"
928	fi
929
930	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
931	then
932	# REMOVE COLONS FROM THE OPTION-STRING, IF THERE ARE ANY
933	modules=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
934	fi
935
936	done < $tmp_mbuild
937
938
939	# GET LINKER OPTIONS
940	line=""
941	found=false
942	grep "$remote_host_string" $config_file \| grep "%lopts" > $tmp_mbuild
943	while read line1
944	do
945
946	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
947	then
948	line="$line1"
949	fi
950
951	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
952	then
953	# REMOVE COLONS FROM THE OPTION-STRING, IF THERE ARE ANY
954	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
955	found=true
956
957	# ADD netCDF- AND FFTW-LIBRARY
958	loader_options="$loader_options $netcdf_lib $fftw_lib"
959	fi
960
961	done < $tmp_mbuild
962
963	if [[ $found = false ]]
964	then
965	printf "\n +++ no loader options found in configuration file"
966	printf "\n for \"$remote_host_string\" "
967	locat=config_file; exit
968	fi
969
970
971	printf "\n\n#------------------------------------------------------------------------# \n"
972	if [[ $remote_host = $local_host ]]
973	then
974	column2="$remote_host (= local host!)"
975	else
976	column2=$remote_host
977	fi
978	printf "\| %-20s%-50s \| \n" "remote_host:" "$column2"
979	printf "\| \| \n"
980	printf "\| %-20s%-50s \| \n" "conditions:" "$condition1 $condition2"
981	column2=$(echo "$remote_md" \| cut -c1-50 )
982	printf "\| %-20s%-50s \| \n" "make depository:" "$column2"
983	line=$(echo "$remote_md" \| cut -c51-)
984	while [[ "$line" != "" ]]
985	do
986	column1=""
987	column2=$(echo "$line" \| cut -c1-50 )
988	printf "\| %-20s%-50s \| \n" "$column1" "$column2"
989	line=$(echo "$line" \| cut -c51-)
990	done
991	if [[ $compile_utility_programs = true ]]
992	then
993	column2=$(echo "$remote_ud" \| cut -c1-50 )
994	printf "\| $column1$column2 \| \n"
995	printf "\| %-20s%-50s \| \n" "utility directory:" "$column2"
996	line=$(echo "$remote_ud" \| cut -c51-)
997	while [[ "$line" != "" ]]
998	do
999	column1=""
1000	column2=$(echo "$line" \| cut -c1-50 )
1001	printf "\| %-20s%-50s \| \n" "$column1" "$column2"
1002	line=$(echo "$line" \| cut -c51-)
1003	done
1004	fi
1005	printf "\| %-20s%-50s \| \n" "username:" "$remote_username"
1006	printf "\| %-20s%-50s \| \n" "address:" "$remote_address"
1007	printf "\| %-20s%-50s \| \n" "compiler:" "$compiler_name"
1008	if [[ $compile_utility_programs = true ]]
1009	then
1010	printf "\| %-20s%-50s \| \n" "serial compiler:" "$compiler_name_ser"
1011	fi
1012	if [[ "$make_options" != "" ]]
1013	then
1014	printf "\| %-20s%-50s \| \n" "make options:" "$make_options"
1015	fi
1016	column2=$(echo $cpp_options \| cut -c1-50 )
1017	printf "\| %-20s%-50s \| \n" "cpp options:" "$column2"
1018	line=$(echo "$cpp_options" \| cut -c51-)
1019	while [[ "$line" != "" ]]
1020	do
1021	column1=""
1022	column2=$(echo $line \| cut -c1-50 )
1023	printf "\| %-20s%-50s \| \n" "$column1" "$column2"
1024	line=$(echo "$line" \| cut -c51-)
1025	done
1026	column2=$(echo $compiler_options \| cut -c1-50 )
1027	printf "\| %-20s%-50s \| \n" "compiler options:" "$column2"
1028	line=$(echo "$compiler_options" \| cut -c51-)
1029	while [[ "$line" != "" ]]
1030	do
1031	column1=""
1032	column2=$(echo $line \| cut -c1-50 )
1033	printf "\| %-20s%-50s \| \n" "$column1" "$column2"
1034	line=$(echo "$line" \| cut -c51-)
1035	done
1036	column2=$(echo $loader_options \| cut -c1-50 )
1037	printf "\| %-20s%-50s \| \n" "loader options:" "$column2"
1038	line=$(echo "$loader_options" \| cut -c51-)
1039	while [[ "$line" != "" ]]
1040	do
1041	column1=""
1042	column2=$(echo $line \| cut -c1-50 )
1043	printf "\| %-20s%-50s \| \n" "$column1" "$column2"
1044	line=$(echo "$line" \| cut -c51-)
1045	done
1046	if [[ $modules != "" ]]
1047	then
1048	column2=$(echo $modules \| cut -c1-50 )
1049	printf "\| %-20s%-50s \| \n" "modules to be load:" "$column2"
1050	line=$(echo "$modules" \| cut -c51-)
1051	while [[ "$line" != "" ]]
1052	do
1053	column1=""
1054	column2=$(echo $line \| cut -c1-50 )
1055	printf "\| %-20s%-50s \| \n" "$column1" "$column2"
1056	line=$(echo "$line" \| cut -c51-)
1057	done
1058	fi
1059	printf "#------------------------------------------------------------------------# \n"
1060
1061	if [[ $silent = false ]]
1062	then
1063	answer=dummy
1064	printf "\n\n"
1065	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
1066	do
1067	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
1068	read answer
1069	done
1070	if [[ $answer = a \|\| $answer = A ]]
1071	then
1072	locat=user_abort; exit
1073	fi
1074	if [[ $answer = c \|\| $answer = C ]]
1075	then
1076	silent=true
1077	fi
1078	if [[ $answer = s \|\| $answer = S ]]
1079	then
1080	continue
1081	fi
1082	fi
1083
1084
1085	# MAKE ON REMOTE HOST
1086	if [[ $remote_host != $local_host ]]
1087	then
1088	if [[ $compile_utility_programs = false ]]
1089	then
1090
1091	# COPY CURRENT SOURCE CODE TO SOURCE-CODE DIRECTORY ON THE REMOTE HOST
1092	# CREATE THIS DIRECTORY, IF IT DOES NOT EXIST
1093	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_address}:${remote_md}/\" "
1094	if [[ $remote_host != lctit ]]
1095	then
1096	ssh ${remote_username}@${remote_address} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
1097	else
1098	# USING PIPE, BECAUSE TIT ALLOWS SSH TO EXECUTE ONLY SOME SELECTED COMMANDS
1099	echo "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_address} 2>&1
1100	fi
1101
1102	scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_address}:${remote_md}/${mainprog}_sources.tar
1103
1104
1105
1106	# UNTAR PREVIOUS UPDATE ON REMOTE HOST, IF EXISTING
1107	echo " *** untar previous update on remote host, if existing"
1108	if [[ $remote_host != lctit ]]
1109	then
1110	ssh ${remote_username}@${remote_address} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
1111	else
1112	# USING PIPE, BECAUSE TIT ALLOWS SSH TO EXECUTE ONLY SOME SELECTED COMMANDS
1113	echo "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_address} 2>&1
1114	fi
1115
1116
1117	# UNTAR CURRENT SOURCES ON REMOTE HOST
1118	echo " *** untar current sources on remote host"
1119	if [[ $remote_host != lctit ]]
1120	then
1121	ssh ${remote_username}@${remote_address} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
1122	else
1123	# USING PIPE, BECAUSE TIT ALLOWS SSH TO EXECUTE ONLY SOME SELECTED COMMANDS
1124	echo "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_address} 2>&1
1125	fi
1126
1127
1128	# EXECUTE MAKE WITH THOSE OPTIONS DETERMINED ABOVE
1129	# COMMANDS WILL BE COMMUNICATED TO SSH VIA PIPE, SINCE THIS WAY THE SYSTEM- AND
1130	# USER-PROFILES OF THE SHELL ARE COMPLETELY EXECUTED (OTHERWISE, MAKE
1131	# WILL E.G. MISS THE COMPILER-PATHS)
1132	echo " *** execute \"make\" on remote host"
1133
1134
1135	# GENERATE MAKE CALL WITH MAKE OPTIONS
1136	if [[ $remote_host = nech ]]
1137	then
1138	make_call_string="sxmake $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1139	else
1140	make_call_string="make $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1141	fi
1142
1143	# GENERATE COMMAND TO LOAD MODULES, IF MODULES ARE GIVEN
1144	if [[ "$modules" != "" ]]
1145	then
1146	if [[ $remote_host = lctit ]]
1147	then
1148	module_calls=". $modules"
1149	else
1150	module_calls="module load ${modules};"
1151	fi
1152	else
1153	module_calls=""
1154	fi
1155
1156	if [[ $remote_host = ibmkisti \|\| $remote_host = ibms ]]
1157	then
1158
1159	ssh ${remote_username}@${remote_address} "$init_cmds $module_calls cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1160
1161	elif [[ $remote_host = ibmh ]]
1162	then
1163
1164	echo "$init_cmds $module_calls export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_address} 2>&1 \| tee ${remote_host}_last_make_protokoll
1165
1166	elif [[ $remote_host = lctit ]]
1167	then
1168
1169	echo " " > ${remote_host}_last_make_protokoll
1170	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1171	do
1172	echo "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_address} 2>&1 \| tee ${remote_host}_last_make_protokoll
1173	done
1174
1175	elif [[ $remote_host = lcxe6 ]]
1176	then
1177
1178	ssh ${remote_username}@${remote_address} "$init_cmds $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1179
1180	else
1181
1182	echo "$init_cmds $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_address} 2>&1 \| tee ${remote_host}_last_make_protokoll
1183
1184	fi
1185
1186	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
1187	then
1188	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1189	if [[ $silent = false ]]
1190	then
1191	answer=dummy
1192	printf "\n"
1193	while [[ "$answer" != c && "$answer" != k ]]
1194	do
1195	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1196	read answer
1197	if [[ "$answer" = l ]]
1198	then
1199	more ${remote_host}_last_make_protokoll
1200	fi
1201	done
1202	if [[ $answer = k ]]
1203	then
1204	locat=user_abort; exit
1205	fi
1206	fi
1207	fi
1208
1209
1210
1211	# TAR UPDATED VERSION ON THE REMOTE HOST
1212	printf "\n *** tar update on remote host ..."
1213	if [[ $remote_host != lctit ]]
1214	then
1215	ssh ${remote_username}@${remote_address} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod"
1216	else
1217	# USING PIPE, BECAUSE TIT ALLOWS SSH TO EXECUTE ONLY SOME SELECTED COMMANDS
1218	echo "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod" \| ssh ${remote_username}@${remote_address} 2>&1
1219	fi
1220
1221
1222
1223	# DO THE SAME THINGS FOR THE UTILITY-ROUTINES:
1224	# COPY CURRENT SOURCE CODE TO SOURCE-CODE DIRECTORY ON THE REMOTE HOST
1225	# CREATE THIS DIRECTORY, IF IT DOES NOT EXIST
1226	elif [[ $compile_utility_programs = true ]]
1227	then
1228
1229	printf "\n\n"
1230	echo " *** copying scripts and utility programs to \"${remote_address}:${remote_ud}/\" "
1231	cd ${local_source_path}/../SCRIPTS
1232
1233	if [[ $remote_host != lctit ]]
1234	then
1235	ssh ${remote_username}@${remote_address} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
1236	else
1237	# USING PIPE, BECAUSE TIT ALLOWS SSH TO EXECUTE ONLY SOME SELECTED COMMANDS
1238	echo "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_address} 2>&1
1239	fi
1240
1241	# COPY SHELL-SCRIPTS
1242	scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_address}:${remote_ud}/../SCRIPTS > /dev/null
1243
1244	cd - > /dev/null
1245	cd ${local_source_path}/../UTIL
1246
1247
1248	# COPY UTILITY-ROUTINES
1249	scp Makefile *.f90 ${remote_username}@${remote_address}:${remote_ud} > /dev/null
1250
1251
1252
1253	# EXECUTE MAKE WITH THOSE OPTIONS DETERMINED ABOVE
1254	# COMMANDS WILL BE COMMUNICATED TO SSH VIA PIPE, SINCE THIS WAY THE SYSTEM- AND
1255	# USER-PROFILES OF THE SHELL ARE COMPLETELY EXECUTED (OTHERWISE, MAKE
1256	# WILL E.G. MISS THE COMPILER-PATHS)
1257	echo " *** execute \"make\" on remote host"
1258
1259	if [[ $remote_host = nech ]]
1260	then
1261	make_call_string="sxmake $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1262	else
1263	make_call_string="make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1264	fi
1265
1266	# GENERATE COMMAND TO LOAD MODULES, IF MODULES ARE GIVEN
1267	if [[ "$modules" != "" ]]
1268	then
1269	if [[ $remote_host = lctit ]]
1270	then
1271	module_calls=". $modules"
1272	else
1273	module_calls="module load ${modules};"
1274	fi
1275	else
1276	module_calls=""
1277	fi
1278
1279
1280	if [[ $remote_host = ibms ]]
1281	then
1282
1283	ssh ${remote_username}@${remote_address} "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
1284
1285	elif [[ $remote_host = ibmh ]]
1286	then
1287
1288	echo "$init_cmds $module_calls export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_address}
1289
1290	elif [[ $remote_host = lctit ]]
1291	then
1292
1293	echo " " > ${remote_host}_last_make_protokoll
1294	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1295	do
1296	echo "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_address} 2>&1 \| tee ${remote_host}_last_make_protokoll
1297	done
1298
1299	elif [[ $remote_host = lcxe6 ]]
1300	then
1301
1302	ssh ${remote_username}@${remote_address} "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1303
1304	else
1305
1306	echo "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_address} 2>&1 \| tee ${remote_host}_last_make_protokoll
1307
1308	fi
1309
1310	fi # END OF COMPILING UTILITY-ROUTINES
1311
1312	rm -rf ${remote_host}_last_make_protokoll
1313
1314	# MAKE ON LOCAL HOST
1315	else
1316
1317	# INIT WORKAROUND FOR lcxe6
1318	if [[ $remote_host = lcxe6 \|\| $remote_host = lccrayb \|\| $remote_host = lccrayf \|\| $remote_host = lccrayh ]]
1319	then
1320
1321	eval $init_cmds > /dev/null 2>&1
1322
1323	fi
1324
1325	# FIRST LOAD MODULES, IF GIVEN
1326	if [[ "$modules" != "" ]]
1327	then
1328	if [[ $remote_host = lctit ]]
1329	then
1330	. $modules
1331	elif [[ $remote_host = lcflow ]]
1332	then
1333	eval `$MODULESHOME/bin/modulecmd ksh load ${modules}`
1334	else
1335	eval init_cmds=$init_cmds
1336	module load ${modules}
1337	fi
1338	fi
1339
1340
1341	if [[ $compile_utility_programs = false ]]
1342	then
1343
1344	# CREATE MAKE-DEPOSITORY, IF IT DOES NOT EXIST
1345	eval remote_md=$remote_md
1346	if [[ ! -d $remote_md ]]
1347	then
1348	if mkdir $remote_md
1349	then
1350	printf "\n\n *** directory for make depository:"
1351	printf "\n $remote_md"
1352	printf "\n was created\n"
1353	else
1354	printf "\n +++ directory for make depository:"
1355	printf "\n $remote_md"
1356	printf "\n cannot be created"
1357	locat=local_depository_path; exit
1358	fi
1359	fi
1360
1361	# COPY SOURCE-CODE FROM REPOSITORY TO MAKE-DEPOSITORY
1362	echo " "
1363	echo " *** updating sources in $remote_md"
1364	cd $remote_md
1365	cp $local_source_path/${mainprog}_sources.tar .
1366	tar xf ${mainprog}_sources.tar
1367
1368	# CALL MAKE ON LOCAL HOST USING THE OPTIONS DETERMINED FURTHER ABOVE
1369	echo " "
1370	echo " *** execute \"make\" on local host"
1371
1372	make $make_options PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
1373
1374	if [[ $? != 0 ]]
1375	then
1376	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1377	if [[ $silent = false ]]
1378	then
1379	answer=dummy
1380	printf "\n"
1381	while [[ "$answer" != c && "$answer" != k ]]
1382	do
1383	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1384	read answer
1385	if [[ "$answer" = l ]]
1386	then
1387	more ${remote_host}_last_make_protokoll
1388	fi
1389	done
1390	if [[ $answer = k ]]
1391	then
1392	locat=user_abort; exit
1393	fi
1394	fi
1395	fi
1396
1397
1398	# TAR NEW VERSION ON LOCAL HOST
1399	printf "\n *** tar update on local host ..."
1400	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
1401
1402
1403	# COMPILE THE UTILITY PROGRAMS
1404	elif [[ $compile_utility_programs = true ]]
1405	then
1406	printf "\n\n"
1407	echo " *** compiling the utility programs ..."
1408	cd ${local_source_path}/../UTIL
1409
1410	# TOUCH FILES IN ORDER TO FORCE COMPILATION FOR EVERY BLOCK
1411	touch *.f90
1412	eval init_cmds=$init_cmds
1413	make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
1414
1415	# CHECK IF QMAKE IS AVAILABLE AND COMPILE MRUNGUI
1416	if [[ $util_compiled_localhost == false ]]
1417	then
1418	printf "\n\n"
1419	echo " *** compiling the mrun GUI"
1420	if which qmake >/dev/null; then
1421	cd mrungui
1422	touch *
1423	qmake
1424	make
1425	make clean
1426	rm Makefile
1427	cd ..
1428	else
1429	echo " +++ no qmake found. The (optional) GUI will not be compiled."
1430	fi
1431
1432	# # COMPILE CHECK_NAMELIST_FILES (ONLY FOR ONE BRANCH on LOCALHOST NEEDED)
1433	# printf "\n\n"
1434	# echo " *** compiling check_namelist_files ..."
1435	#
1436	# # GET CHECK OPTIONS
1437	# line=""
1438	# found=false
1439	# grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
1440	# while read line1
1441	# do
1442	#
1443	# if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
1444	# then
1445	# line="$line1"
1446	# fi
1447	#
1448	# if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
1449	# then
1450	# # REMOVE COLONS FROM THE OPTION-STRING, IF THERE ARE ANY
1451	# line="$line "
1452	# copts_check=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g' \| sed 's/-D[^ ]* //g' \| sed 's/ -D.*//g'`
1453	# found=true
1454	# fi
1455	#
1456	# done < $tmp_mbuild
1457	# copts_check="$copts_check -D__check -D__parallel"
1458	#
1459	# check_depository_path=${local_source_path}/../UTIL
1460	# cd $check_depository_path
1461	# mkdir check_tmp
1462	# cp ${local_source_path}/${mainprog}_sources_check.tar ./check_tmp
1463	# cd check_tmp
1464	# tar -xf ${mainprog}_sources_check.tar
1465	# rm -rf ${mainprog}_sources_check.tar
1466	# make -f Makefile_check $make_options F90=$compiler_name_ser COPT="$copts_check" F90FLAGS="$compiler_options"
1467	# tar -cf check_namelist_files.tar Makefile_check check_namelist_files.x .f90 .o *.mod
1468	# mv check_namelist_files.tar $check_depository_path
1469	# mv check_namelist_files.x $PALM_BIN
1470	# cd $check_depository_path
1471	# rm -rf check_tmp
1472	# util_compiled_localhost=true
1473	else
1474	cd $check_depository_path
1475	printf "\n\n"
1476	echo " *** skipped compilation of mrun GUI."
1477	printf "\n\n"
1478	echo " *** skipped compilation of check_namelist_files (currently not available)."
1479	fi
1480
1481	fi
1482	fi
1483	done
1484
1485
1486	if [[ $host_found = false ]]
1487	then
1488	if [[ $host = all ]]
1489	then
1490	printf "\n +++ no hosts found in configuration file"
1491	else
1492	printf "\n +++ host \"$host\" not found in configuration file"
1493	fi
1494	locat=config_file; exit
1495	fi
1496
1497	if [[ "$block_conditions" != none && $block_conditions_found = false ]]
1498	then
1499	printf "\n +++ block conditions \"$block_conditions\" not found for host \"$host\""
1500	fi
1501
1502
1503	# FINAL WORK
1504	rm -f hosts_found_in_config_file
1505	rm -f ${local_source_path}/${mainprog}_sources_check.tar

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |