Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 1494

Last change on this file since 1494 was 1488, checked in by raasch, 10 years ago
last commit documented
Property svn:keywords set to `Id Rev`
File size: 48.4 KB

Line
1	#!/bin/bash
2
3	# mbuild - script for compiling the PALM code and its utility programs
4
5	#--------------------------------------------------------------------------------#
6	# This file is part of PALM.
7	#
8	# PALM is free software: you can redistribute it and/or modify it under the terms
9	# of the GNU General Public License as published by the Free Software Foundation,
10	# either version 3 of the License, or (at your option) any later version.
11	#
12	# PALM is distributed in the hope that it will be useful, but WITHOUT ANY
13	# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
14	# A PARTICULAR PURPOSE. See the GNU General Public License for more details.
15	#
16	# You should have received a copy of the GNU General Public License along with
17	# PALM. If not, see <http://www.gnu.org/licenses/>.
18	#
19	# Copyright 1997-2014 Leibniz Universitaet Hannover
20	#--------------------------------------------------------------------------------#
21	#
22	# Current revisions:
23	# ------------------
24	#
25	#
26	# Former revisions:
27	# -----------------
28	# $Id: mbuild 1488 2014-10-25 14:39:03Z maronga $
29	#
30	# 1487 2014-10-25 14:36:28Z raasch
31	# bash compatibility adjustments: output formatting with printf instead
32	# of "typeset -L/-R", print replaced by echo
33	#
34	# 1468 2014-09-24 14:06:57Z maronga
35	# Typo removed (addres->address)
36	# Adjustments for lcxe6
37	#
38	# 1390 2014-05-06 07:57:37Z maronga
39	# disabled compilation of parameter file check (currently not working),
40	# adjustments for lcxe6
41	#
42	# 1388 2014-05-06 07:42:38Z maronga
43	# small adjustments for lcxe6
44	#
45	# 1350 2014-04-04 13:01:30Z maronga
46	# init_cmds is now executed before module calls in case of compilation on local
47	# host
48	#
49	# 1289 2014-03-04 07:12:34Z raasch
50	# comments translated from German to English
51	# fimm-, scirocco-, ibmy-, and sgi-specific code removed
52	#
53	# 1274 2014-01-09 13:14:54Z heinze
54	# adjustments for lccrayh
55	#
56	# 1255 2013-11-07 14:43:35Z raasch
57	# further adjustments for lccrayb remote access
58	#
59	# 1229 2013-09-20 06:55:19Z raasch
60	# adjustments for lccrayb
61	#
62	# 1216 2013-08-26 09:31:42Z raasch
63	# RCS renamed SOURCES
64	#
65	# 1210 2013-08-14 10:58:20Z raasch
66	# fftw support added
67	#
68	# 1197 2013-07-04 06:19:45Z raasch
69	# adjustments for CSC Helsinki (lccrayf)
70	#
71	# 1099 2013-02-10 01:47:43Z raasch
72	# adjustments for Forwind cluster (lcflow)
73	#
74	# 1096 2013-02-03 01:52:12Z raasch
75	# decalpha parts (yonsei) removed
76	#
77	# 2013-02-02 07:06:13Z raasch
78	# adjustments for Kyushu-University computing center (lckyut)
79	# old changelog messages removed
80	#
81	# 1083 2013-01-04 10:22:09Z maronga
82	# bugfix in parameter file check (in case that no preprocessor flag, i.e. -cpp was
83	# set in %cpp_options, the last directive in the variable was processed.
84	#
85	# 1081 2013-01-03 08:44:36Z maronga
86	# loader options set for parameter file check_depository_path
87	#
88	# 1069 2012-11-28 16:18:43Z maronga
89	# added copy of nc2vdf tools to remote host_found
90	#
91	# 1046 2012-11-09 14:38:45Z maronga
92	# code put under GPL (PALM 3.9)
93	#
94	# 12/06/02 - Siggi - first version finished
95	# 06/05/02 - Siggi - script development started
96	#
97	#--------------------------------------------------------------------------------#
98	# mbuild - script for compiling the PALM code and its utility programs
99	#
100	# Procedure to compile code on local and remote hosts using the
101	# make-mechanism. The source code must be provided on the local host.
102	#--------------------------------------------------------------------------------#
103
104
105	# VARIABLE DECLARATIONS + DEFAULT VALUES
106	block_conditions=none
107	block_conditions_found=false
108	calltime=""
109	column1=""
110	column2=""
111	compile_utility_programs=false
112	config_file=.mrun.config
113	host=all
114	host_found=false
115	locat=normal
116	makefile=""
117	module_calls=""
118	util_compiled_localhost=false
119	silent=false
120	suf=f90
121	update=false
122	version="MBUILD 2.1 Rev$Rev: 1488 $"
123	working_directory=`pwd`
124
125	typeset -i ih ihost=0
126
127
128	# ERROR HANDLING
129	# IN CASE OF EXIT:
130	trap 'rm -rf $working_directory/tmp_mbuild
131	if [[ $locat != normal ]]
132	then
133	printf "\n\n +++ mbuild killed \n\n"
134	else
135	printf "\n\n *** mbuild finished \n\n"
136	fi' exit
137
138
139	# IN CASE OF TERMINAL-BREAK:
140	trap 'rm -rf $working_directory/tmp_mbuild
141	printf "\n\n +++ mbuild killed by \"^C\" \n\n"
142	exit
143	' 2
144
145
146	tmp_mbuild=${working_directory}/tmp_mbuild
147
148	# READ SHELLSCRIPT-OPTIONS
149	while getopts :c:h:K:m:s:uv option
150	do
151	case $option in
152	(c) config_file=$OPTARG;;
153	(h) host=$OPTARG;;
154	(K) block_conditions=$OPTARG;;
155	(m) makefile=$OPTARG;;
156	(s) suf=$OPTARG;;
157	(u) compile_utility_programs=true;;
158	(v) silent=true;;
159	(\?) printf "\n +++ unknown option $OPTARG \n";
160	locat=parameter; exit;;
161	esac
162	done
163
164
165
166	# CHECK, IF CONFIGURATION-FILE EXISTS
167	if [[ ! -f $config_file ]]
168	then
169	printf "\n +++ configuration file: "
170	printf "\n $config_file"
171	printf "\n does not exist"
172	locat=configuration; exit
173	fi
174
175
176
177	# DETERMINE THE LOCAL HOST
178	local_host_real_name=$(hostname)
179	local_address=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{echo $2}')
180
181
182
183	# DETERMINE HOST-IDENTIFIER (local_host) FROM THE CONFIG-FILE
184	line=""
185	grep "%host_identifier" $config_file > $tmp_mbuild
186	while read line
187	do
188	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
189	then
190	HOSTNAME=`echo $line \| cut -d" " -s -f2`
191	host_identifier=`echo $line \| cut -d" " -s -f3`
192	if [[ $local_host_real_name = $HOSTNAME ]]
193	then
194	local_host=$host_identifier
195	break
196	fi
197	fi
198	done < $tmp_mbuild
199
200	if [[ "$local_host" = "" ]]
201	then
202	printf "\n +++ no host identifier found in configuration file \"$config_file\""
203	printf "\n for local host \"$local_host_real_name\"."
204	printf "\n Please add line"
205	printf "\n \"\%host_identifier $local_host_real_name <identifier>\""
206	printf "\n to the configuration file."
207	locat=local_host; exit
208	fi
209
210
211	if [[ $local_host != ibms ]]
212	then
213	config_file=$PWD/$config_file
214	else
215	config_file=`pwd`/$config_file
216	fi
217
218
219	# DETERMINE THE BLOCK CONDITIONS
220	if [[ $block_conditions != none ]]
221	then
222	block_condition1=`echo $block_conditions \| cut -d" " -f1`
223	block_condition2=`echo $block_conditions \| cut -d" " -f2`
224	if [[ "$block_condition2" = "$block_condition1" ]]
225	then
226	block_condition2=""
227	fi
228	fi
229
230
231	# DETERMINE USER NAME ON LOCAL HOST FROM THE CONFIG-FILE
232	line=""
233	grep " $local_host" $config_file \| grep "%remote_username" > $tmp_mbuild
234	while read line
235	do
236	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
237	then
238	local_username=`echo $line \| cut -d" " -s -f2`
239	fi
240	done < $tmp_mbuild
241
242
243	if [[ "$local_username" = "" ]]
244	then
245	printf "\n +++ no user name found in configuration file"
246	printf "\n for local host \"$local_host\" "
247	locat=config_file; exit
248	fi
249
250
251	# DETERMINE LOCAL SOURCE-CODE PATH.
252	# FIRST CHECK, IF A GLOBAL SOURCE-CODE PATH HAS BEEN DECLARED FOR ALL HOSTS.
253	# THEREFORE, FIRST SET ALL GLOBAL VARIABLES DECLARED IN THE CONFIG-FILE,
254	# BECAUSE THEY MAY BE USED AS PART OF THE PATH NAME.
255	line=""
256	grep "%" $config_file > $tmp_mbuild
257	while read line
258	do
259	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" && $(echo $line \| cut -c1) != "#" ]]
260	then
261	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
262	value=`echo $line \| cut -d" " -s -f2`
263	eval export $var=\$value
264	fi
265	done < $tmp_mbuild
266
267	# NOW CHECK, IF A GLOBAL SOURCE-CODE-PATH HAS BEEN DECLARED
268	line=""
269	grep "%source_path" $config_file > $tmp_mbuild
270	while read line
271	do
272	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
273	then
274	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
275	then
276	global_source_path=`echo $line \| cut -d" " -s -f2`
277	fi
278	fi
279	done < $tmp_mbuild
280
281	line=""
282	grep " $local_host" $config_file \| grep "%source_path" > $tmp_mbuild
283	while read line
284	do
285	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
286	then
287	local_source_path=`echo $line \| cut -d" " -s -f2`
288	fi
289	done < $tmp_mbuild
290
291	if [[ "$local_source_path" = "" ]]
292	then
293	if [[ "$global_source_path" != "" ]]
294	then
295	local_source_path=$global_source_path
296	else
297	printf "\n +++ no source path found in configuration file"
298	printf "\n for local host \"$local_host\" "
299	printf "\n please set \"\%source_path\" in configuration file"
300	locat=config_file; exit
301	fi
302	fi
303	eval local_source_path=$local_source_path
304	eval local_source_path=$local_source_path
305
306
307
308	# DETERMINE GLOBAL DEPOSITORY-PATH
309	line=""
310	grep "%depository_path" $config_file > $tmp_mbuild
311	while read line
312	do
313	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
314	then
315	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
316	then
317	global_depository_path=`echo $line \| cut -d" " -s -f2`
318	fi
319	fi
320	done < $tmp_mbuild
321
322	if [[ $found = false ]]
323	then
324	printf "\n +++ no \%depository_path found in"
325	printf "\n $config_file"
326	locat=depository_path; exit
327	fi
328
329	# CHECK, IF A MAIN PROGRAM HAS BEEN DEFINED IN THE CONFIG-FILE
330	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
331	then
332	printf "\n +++ no main program or more than one main program defined"
333	printf "\n in configuration file"
334	locat=configuration; exit
335	else
336	line=`grep "%mainprog" $config_file`
337	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
338	then
339	printf "\n +++ no main program defined in configuration file"
340	locat=configuration; exit
341	fi
342	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
343	fi
344
345
346
347	# CHECK IF MAKEFILE EXITS
348	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
349	if [[ ! -f $makefile ]]
350	then
351	printf "\n +++ makefile: "
352	printf "\n $makefile"
353	printf "\n does not exist"
354	locat=makefile; exit
355	fi
356
357
358	# HEADER-OUTPUT (PART1: MESSAGES CONCERNING THE LOCAL HOST)
359	calltime=$(date)
360	printf "\n"
361	printf "#------------------------------------------------------------------------# \n"
362	printf "\| %-40s%30s \| \n" "$version" "$calltime"
363	printf "\| \| \n"
364	printf "\| %-20s%-50s \| \n" "called on:" "$local_host_real_name"
365	printf "\| %-20s%-50s \| \n" "local username:" "$local_username"
366	printf "\| %-20s%-50s \| \n" "local IP-address:" "$local_address"
367	column2=$(echo $config_file \| cut -c1-50 )
368	printf "\| %-20s%-50s \| \n" "config file:" "$column2"
369	line=$(echo "$config_file" \| cut -c51-)
370	while [[ "$line" != "" ]]
371	do
372	column1=""
373	column2=$(echo $line \| cut -c1-50 )
374	printf "\| %-20s%-50s \| \n" "$column1" "$column2"
375	line=$(echo "$line" \| cut -c51-)
376	done
377	column2=$(echo $makefile \| cut -c1-50 )
378	printf "\| %-20s%-50s \| \n" "makefile:" "$column2"
379	line=$(echo "$makefile" \| cut -c51-)
380	while [[ "$line" != "" ]]
381	do
382	column1=""
383	column2=$(echo $line \| cut -c1-50 )
384	printf "\| %-20s%-50s \| \n" "$column1" "$column2"
385	line=$(echo "$line" \| cut -c51-)
386	done
387	column2=$(echo $local_source_path \| cut -c1-50 )
388	printf "\| %-20s%-50s \| \n" "local source path:" "$column2"
389	line=$(echo "$local_source_path" \| cut -c51-)
390	while [[ "$line" != "" ]]
391	do
392	column1=""
393	column2=$(echo $line \| cut -c1-50 )
394	printf "\| %-20s%-50s \| \n" "$column1" "$column2"
395	line=$(echo "$line" \| cut -c51-)
396	done
397	printf "#------------------------------------------------------------------------# \n"
398
399
400	if [[ $compile_utility_programs = false ]]
401	then
402
403	# IN ANY CASE, GIVE ALL FILES WRITE-PERMIT, IN ORDER TO AVOID PROBLEMS
404	# WITH OVERWRITING FILES ON THE REMOTE HOST
405	cd $local_source_path
406	printf "\n\n *** tar of makefile and source files in $local_source_path"
407	tar -cf ${mainprog}_sources.tar Makefile *.$suf
408	printf "\n"
409
410	else
411	cd $local_source_path
412	printf "\n\n *** tar of makefile and source files in $local_source_path"
413
414	cat Makefile_check\|while read line
415	do
416	line=$(echo $line\|grep SOURCES)
417	if [[ $line == "SOURCES" ]]
418	then
419	line=$(echo $line\|sed 's/SOURCES = //g')
420	break
421	fi
422	done
423
424	tar -cf ${mainprog}_sources_check.tar Makefile_check $line
425	printf "\n"
426	fi
427
428
429
430	# GET CONFIRMATION TO CONTINUE
431	if [[ $host = all ]]
432	then
433	printf "\n *** updates will be made for ALL hosts found in"
434	printf "\n the configuration file"
435	else
436	printf "\n *** update will be made for host \"$host\" "
437	fi
438
439	if [[ $silent = false ]]
440	then
441	answer=dummy
442	printf "\n\n"
443	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
444	do
445	printf " >>> continue (y/n) ? "
446	read answer
447	done
448	if [[ $answer = n \|\| $answer = N ]]
449	then
450	locat=user_abort; exit
451	fi
452	fi
453
454
455
456
457	# GENERATE MODEL-VERSIONS FOR ALL HOST-BLOCKS
458	# FOUND IN THE CONFIGURATION-FILE
459	printf "\n *** scanning configuration file for host(s) ..."
460
461	grep %fopts $config_file > $tmp_mbuild
462	while read line
463	do
464	# SKIP COMMENT-LINES
465	[[ $(echo $line \| cut -c1) = "#" ]] && continue
466	(( ihost = ihost + 1 ))
467	hostline[$ihost]="$line"
468	done < $tmp_mbuild
469
470
471	while (( ih < ihost ))
472	do
473
474	(( ih = ih + 1 ))
475
476	# DETERMINE REMOTE HOST AND CONDITIONS FOR THE RESPECTIVE BLOCK
477	# CONTINUE, ONLY IF THIS HOST HAS BEEN CHOSEN VIA -h OPTION AND IF
478	# CONDITIONS HAVE BEEN CHOSEN VIA -K OPTION
479	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
480	remote_host=`echo $remote_host_string \| cut -d" " -f1`
481	if [[ $host != all ]]
482	then
483	[[ $remote_host != $host ]] && continue
484	fi
485	host_found=true
486	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
487	if [[ $condition1 = $remote_host ]]
488	then
489	condition1=""
490	else
491	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
492	fi
493
494	if [[ $block_conditions != none ]]
495	then
496	if [[ "$condition1" != "$block_condition1" \|\| "$condition2" != "$block_condition2" ]]
497	then
498	continue
499	fi
500	block_conditions_found=true
501	fi
502
503	fftw_inc=""
504	fftw_lib=""
505	modules=""
506	netcdf_inc=""
507	netcdf_lib=""
508	make_options=""
509
510	# DETERMINE IP-ADDRES OF THE REMOTE-HOST
511	case $remote_host in
512	(lccrayb) remote_address=130.73.233.1;;
513	(lccrayh) remote_address=130.75.4.1;;
514	(lcflow) remote_address="flow.hpc.uni-oldenburg.de";;
515	(lckordi) remote_adress=210.219.61.8;;
516	(lcmuk) remote_address=130.75.105.2;;
517	(lcrte) remote_address=133.5.185.60;;
518	(lcsb) remote_address=147.46.30.151;;
519	(lck) remote_address=165.132.26.61;;
520	(lckiaps) remote_address=118.128.66.223;;
521	(lckyut) remote_address=133.5.4.37;;
522	(lctit) remote_address=10.1.6.170;;
523	(lcxe6) remote_address=129.177.20.113;;
524	(lcxt5m) remote_address=193.166.211.144;;
525	(ibmh) remote_address=136.172.40.15;;
526	(ibmkisti) remote_address=150.183.146.24;;
527	(ibmku) remote_address=133.5.4.129;;
528	(ibms) remote_address=150.183.5.101;;
529	(nech) remote_address=136.172.44.192;;
530	(neck) remote_address=133.5.178.11;;
531	(ground.yonsei.ac.kr) remote_address=134.75.155.33;;
532	(*) if [[ $local_host != $remote_host ]]
533	then
534	printf "\n +++ remote host \"$remote_host\" unknown";
535	printf "\n please inform PALM group support!"
536	locat=remote_host; exit
537	fi;;
538	esac
539
540
541	# DETERMINE REMOTE-USERNAME
542	line=""
543	found=false
544	grep "$remote_host_string" $config_file \| grep "%remote_username" > $tmp_mbuild
545	while read line1
546	do
547
548	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
549	then
550	line="$line1"
551	fi
552
553	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
554	then
555	remote_username=`echo $line \| cut -d" " -s -f2`
556	found=true
557	fi
558
559	done < $tmp_mbuild
560
561	if [[ $found = false ]]
562	then
563	printf "\n +++ no remote username found in configuration file"
564	printf "\n for \"$remote_host_string\" "
565	locat=config_file; exit
566	fi
567
568
569	# DETERMINE REMOTE-SOURCE-CODE-PATH
570	line=""
571	remote_source_path=""
572	grep "$remote_host_string" $config_file \| grep "%source_path" > $tmp_mbuild
573	while read line1
574	do
575
576	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
577	then
578	line="$line1"
579	fi
580
581	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
582	then
583	remote_source_path=`echo $line \| cut -d" " -s -f2`
584	fi
585
586	done < $tmp_mbuild
587
588	if [[ "$remote_source_path" = "" ]]
589	then
590	if [[ "$global_source_path" != "" ]]
591	then
592	remote_source_path=$global_source_path
593	else
594	printf "\n +++ no source path found in configuration file"
595	printf "\n for \"$remote_host_string\" "
596	locat=config_file; exit
597	fi
598	fi
599
600	remote_ud=${remote_source_path}/../UTIL
601	remote_ud=$(eval echo $remote_ud)
602
603
604	# DETERMINE REMOTE-PATH FOR MAKE-DEPOSITORY
605	remote_md=""
606	line=""
607	grep "$remote_host_string" $config_file \| grep "%depository_path" > $tmp_mbuild
608	while read line1
609	do
610
611	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
612	then
613	line="$line1"
614	fi
615
616	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
617	then
618	remote_md=`echo $line \| cut -d" " -s -f2`
619	fi
620
621	done < $tmp_mbuild
622
623	if [[ "$remote_md" = "" ]]
624	then
625	if [[ "$global_depository_path" != "" ]]
626	then
627	remote_md=$global_depository_path
628	else
629	printf "\n +++ no depository path found in configuration file"
630	printf "\n for \"$remote_host_string\" "
631	printf "\n please set \"\%depository_path\" in configuration file"
632	locat=config_file; exit
633	fi
634	fi
635
636	remote_md=$(eval echo $remote_md)
637	block=""
638	[[ "$condition1" != "" ]] && block=_$condition1
639	[[ "$condition2" != "" ]] && block=${block}_$condition2
640	remote_md=${remote_md}$block
641
642
643	# DETERMINE COMPILERNAME
644	line=""
645	found=false
646	grep "$remote_host_string" $config_file \| grep "%compiler_name " > $tmp_mbuild
647	while read line1
648	do
649
650	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
651	then
652	line="$line1"
653	fi
654
655	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
656	then
657	compiler_name=`echo $line \| cut -d" " -s -f2`
658	found=true
659	fi
660
661	done < $tmp_mbuild
662
663	if [[ $found = false ]]
664	then
665	printf "\n +++ no compiler name found in configuration file"
666	printf "\n for \"$remote_host_string\" "
667	locat=config_file; exit
668	fi
669
670
671	# IN CASE OF PARALLEL EXECUTION (COMPILER FOR PARALLEL EXECUTION),
672	# A SERIAL COMPILERNAME MUST BE DETERMINED ALSO
673	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
674	then
675	line=""
676	found=false
677	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" > $tmp_mbuild
678	while read line1
679	do
680
681	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
682	then
683	line="$line1"
684	fi
685
686	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
687	then
688	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
689	found=true
690	fi
691
692	done < $tmp_mbuild
693
694	if [[ $found = false ]]
695	then
696	printf "\n +++ no serial compiler name found in configuration file"
697	printf "\n for \"$remote_host_string\" "
698	locat=config_file; exit
699	fi
700	else
701	compiler_name_ser=$compiler_name
702	fi
703
704
705
706	# DETERMINE PREPROCESSOR-OPTIONS AND DIRECTIVES
707	line=""
708	found=false
709	grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
710	while read line1
711	do
712
713	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
714	then
715	line="$line1"
716	fi
717
718	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
719	then
720	# REMOVE COLONS FROM THE OPTION-STRING, IF THERE ARE ANY
721	cpp_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
722	found=true
723	fi
724
725	done < $tmp_mbuild
726
727	if [[ $found = false ]]
728	then
729	printf "\n +++ no preprocessor options found in configuration file"
730	printf "\n for \"$remote_host_string\" "
731	locat=config_file; exit
732	fi
733
734
735	# ADD HOST-SPECIFIC PREPROCESSOR-DIRECTIVES
736	for string in $remote_host_string
737	do
738	if [[ $(echo $remote_host \| cut -c1-2) = lc && $(echo $string \| cut -c1-2) = lc ]]
739	then
740	cpp_options="$cpp_options -D__lc "
741	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $(echo $string \| cut -c1-3) = ibm ]]
742	then
743	cpp_options="${cpp_options},-D__ibm"
744	elif [[ $(echo $remote_host \| cut -c1-3) = nec && $(echo $string \| cut -c1-3) = nec ]]
745	then
746	cpp_options="${cpp_options} -D__nec"
747	else
748	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
749	then
750	cpp_options="${cpp_options},-D__$string"
751	else
752	cpp_options="$cpp_options -D__$string "
753	fi
754	fi
755	done
756
757
758
759	# GET netCDF OPTIONS
760	line=""
761	grep "$remote_host_string" $config_file \| grep "%netcdf_inc" > $tmp_mbuild
762	while read line1
763	do
764
765	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
766	then
767	line="$line1"
768	fi
769
770	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
771	then
772	# REMOVE COLONS FROM THE OPTION-STRING, IF THERE ARE ANY
773	netcdf_inc=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
774	fi
775
776	done < $tmp_mbuild
777
778	line=""
779	grep "$remote_host_string" $config_file \| grep "%netcdf_lib" > $tmp_mbuild
780	while read line1
781	do
782
783	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
784	then
785	line="$line1"
786	fi
787
788	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
789	then
790	# REMOVE COLONS FROM THE OPTION-STRING, IF THERE ARE ANY
791	netcdf_lib=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
792	fi
793
794	done < $tmp_mbuild
795
796
797
798	# GET FFTW OPTIONS
799	line=""
800	grep "$remote_host_string" $config_file \| grep "%fftw_inc" > $tmp_mbuild
801	while read line1
802	do
803
804	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
805	then
806	line="$line1"
807	fi
808
809	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
810	then
811	# REMOVE COLONS FROM THE OPTION-STRING, IF THERE ARE ANY
812	fftw_inc=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
813	fi
814
815	done < $tmp_mbuild
816
817	line=""
818	grep "$remote_host_string" $config_file \| grep "%fftw_lib" > $tmp_mbuild
819	while read line1
820	do
821
822	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
823	then
824	line="$line1"
825	fi
826
827	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
828	then
829	# REMOVE COLONS FROM THE OPTION-STRING, IF THERE ARE ANY
830	fftw_lib=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
831	fi
832
833	done < $tmp_mbuild
834
835
836
837	# GET MAKE OPTIONS
838	line=""
839	found=false
840	grep "$remote_host_string" $config_file \| grep "%mopts" > $tmp_mbuild
841	while read line1
842	do
843
844	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
845	then
846	line="$line1"
847	fi
848
849	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
850	then
851	# REMOVE COLONS FROM THE OPTION-STRING, IF THERE ARE ANY
852	make_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
853
854	fi
855
856	done < $tmp_mbuild
857
858
859
860	# GET COMPILER OPTIONS
861	line=""
862	found=false
863	grep "$remote_host_string" $config_file \| grep "%fopts" > $tmp_mbuild
864	while read line1
865	do
866
867	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
868	then
869	line="$line1"
870	fi
871
872	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
873	then
874	# REMOVE COLONS FROM THE OPTION-STRING, IF THERE ARE ANY
875	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
876	found=true
877
878	# ADD INCLUDE PATHS FOR netCDF AND FFTW
879	compiler_options="$compiler_options $netcdf_inc $fftw_inc"
880	fi
881
882	done < $tmp_mbuild
883
884	if [[ $found = false ]]
885	then
886	printf "\n +++ no compiler options found in configuration file"
887	printf "\n for \"$remote_host_string\" "
888	locat=config_file; exit
889	fi
890
891
892	# GET LOGIN INIT COMMANDS
893	line=""
894	grep "$remote_host_string" $config_file \| grep "%login_init_cmd" > $tmp_mbuild
895	while read line1
896	do
897
898	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
899	then
900	line="$line1"
901	fi
902
903	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
904	then
905	# REMOVE COLONS FROM THE OPTION-STRING, IF THERE ARE ANY
906	init_cmds=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
907	init_cmds="${init_cmds};"
908	fi
909	done < $tmp_mbuild
910
911
912	# GET MODULES TO BE LOADED
913	line=""
914	grep "$remote_host_string" $config_file \| grep "%modules" > $tmp_mbuild
915	while read line1
916	do
917
918	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
919	then
920	line="$line1"
921	fi
922
923	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
924	then
925	# REMOVE COLONS FROM THE OPTION-STRING, IF THERE ARE ANY
926	modules=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
927	fi
928
929	done < $tmp_mbuild
930
931
932	# GET LINKER OPTIONS
933	line=""
934	found=false
935	grep "$remote_host_string" $config_file \| grep "%lopts" > $tmp_mbuild
936	while read line1
937	do
938
939	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
940	then
941	line="$line1"
942	fi
943
944	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
945	then
946	# REMOVE COLONS FROM THE OPTION-STRING, IF THERE ARE ANY
947	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
948	found=true
949
950	# ADD netCDF- AND FFTW-LIBRARY
951	loader_options="$loader_options $netcdf_lib $fftw_lib"
952	fi
953
954	done < $tmp_mbuild
955
956	if [[ $found = false ]]
957	then
958	printf "\n +++ no loader options found in configuration file"
959	printf "\n for \"$remote_host_string\" "
960	locat=config_file; exit
961	fi
962
963
964	printf "\n\n#------------------------------------------------------------------------# \n"
965	if [[ $remote_host = $local_host ]]
966	then
967	column2="$remote_host (= local host!)"
968	else
969	column2=$remote_host
970	fi
971	printf "\| %-20s%-50s \| \n" "remote_host:" "$column2"
972	printf "\| \| \n"
973	printf "\| %-20s%-50s \| \n" "conditions:" "$condition1 $condition2"
974	column2=$(echo "$remote_md" \| cut -c1-50 )
975	printf "\| %-20s%-50s \| \n" "make depository:" "$column2"
976	line=$(echo "$remote_md" \| cut -c51-)
977	while [[ "$line" != "" ]]
978	do
979	column1=""
980	column2=$(echo "$line" \| cut -c1-50 )
981	printf "\| %-20s%-50s \| \n" "$column1" "$column2"
982	line=$(echo "$line" \| cut -c51-)
983	done
984	if [[ $compile_utility_programs = true ]]
985	then
986	column2=$(echo "$remote_ud" \| cut -c1-50 )
987	printf "\| $column1$column2 \| \n"
988	printf "\| %-20s%-50s \| \n" "utility directory:" "$column2"
989	line=$(echo "$remote_ud" \| cut -c51-)
990	while [[ "$line" != "" ]]
991	do
992	column1=""
993	column2=$(echo "$line" \| cut -c1-50 )
994	printf "\| %-20s%-50s \| \n" "$column1" "$column2"
995	line=$(echo "$line" \| cut -c51-)
996	done
997	fi
998	printf "\| %-20s%-50s \| \n" "username:" "$remote_username"
999	printf "\| %-20s%-50s \| \n" "address:" "$remote_address"
1000	printf "\| %-20s%-50s \| \n" "compiler:" "$compiler_name"
1001	if [[ $compile_utility_programs = true ]]
1002	then
1003	printf "\| %-20s%-50s \| \n" "serial compiler:" "$compiler_name_ser"
1004	fi
1005	if [[ "$make_options" != "" ]]
1006	then
1007	printf "\| %-20s%-50s \| \n" "make options:" "$make_options"
1008	fi
1009	column2=$(echo $cpp_options \| cut -c1-50 )
1010	printf "\| %-20s%-50s \| \n" "cpp options:" "$column2"
1011	line=$(echo "$cpp_options" \| cut -c51-)
1012	while [[ "$line" != "" ]]
1013	do
1014	column1=""
1015	column2=$(echo $line \| cut -c1-50 )
1016	printf "\| %-20s%-50s \| \n" "$column1" "$column2"
1017	line=$(echo "$line" \| cut -c51-)
1018	done
1019	column2=$(echo $compiler_options \| cut -c1-50 )
1020	printf "\| %-20s%-50s \| \n" "compiler options:" "$column2"
1021	line=$(echo "$compiler_options" \| cut -c51-)
1022	while [[ "$line" != "" ]]
1023	do
1024	column1=""
1025	column2=$(echo $line \| cut -c1-50 )
1026	printf "\| %-20s%-50s \| \n" "$column1" "$column2"
1027	line=$(echo "$line" \| cut -c51-)
1028	done
1029	column2=$(echo $loader_options \| cut -c1-50 )
1030	printf "\| %-20s%-50s \| \n" "loader options:" "$column2"
1031	line=$(echo "$loader_options" \| cut -c51-)
1032	while [[ "$line" != "" ]]
1033	do
1034	column1=""
1035	column2=$(echo $line \| cut -c1-50 )
1036	printf "\| %-20s%-50s \| \n" "$column1" "$column2"
1037	line=$(echo "$line" \| cut -c51-)
1038	done
1039	if [[ $modules != "" ]]
1040	then
1041	column2=$(echo $modules \| cut -c1-50 )
1042	printf "\| %-20s%-50s \| \n" "modules to be load:" "$column2"
1043	line=$(echo "$modules" \| cut -c51-)
1044	while [[ "$line" != "" ]]
1045	do
1046	column1=""
1047	column2=$(echo $line \| cut -c1-50 )
1048	printf "\| %-20s%-50s \| \n" "$column1" "$column2"
1049	line=$(echo "$line" \| cut -c51-)
1050	done
1051	fi
1052	printf "#------------------------------------------------------------------------# \n"
1053
1054	if [[ $silent = false ]]
1055	then
1056	answer=dummy
1057	printf "\n\n"
1058	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
1059	do
1060	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
1061	read answer
1062	done
1063	if [[ $answer = a \|\| $answer = A ]]
1064	then
1065	locat=user_abort; exit
1066	fi
1067	if [[ $answer = c \|\| $answer = C ]]
1068	then
1069	silent=true
1070	fi
1071	if [[ $answer = s \|\| $answer = S ]]
1072	then
1073	continue
1074	fi
1075	fi
1076
1077
1078	# MAKE ON REMOTE HOST
1079	if [[ $remote_host != $local_host ]]
1080	then
1081	if [[ $compile_utility_programs = false ]]
1082	then
1083
1084	# COPY CURRENT SOURCE CODE TO SOURCE-CODE DIRECTORY ON THE REMOTE HOST
1085	# CREATE THIS DIRECTORY, IF IT DOES NOT EXIST
1086	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_address}:${remote_md}/\" "
1087	if [[ $remote_host != lctit ]]
1088	then
1089	ssh ${remote_username}@${remote_address} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
1090	else
1091	# USING PIPE, BECAUSE TIT ALLOWS SSH TO EXECUTE ONLY SOME SELECTED COMMANDS
1092	echo "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_address} 2>&1
1093	fi
1094
1095	scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_address}:${remote_md}/${mainprog}_sources.tar
1096
1097
1098
1099	# UNTAR PREVIOUS UPDATE ON REMOTE HOST, IF EXISTING
1100	echo " *** untar previous update on remote host, if existing"
1101	if [[ $remote_host != lctit ]]
1102	then
1103	ssh ${remote_username}@${remote_address} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
1104	else
1105	# USING PIPE, BECAUSE TIT ALLOWS SSH TO EXECUTE ONLY SOME SELECTED COMMANDS
1106	echo "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_address} 2>&1
1107	fi
1108
1109
1110	# UNTAR CURRENT SOURCES ON REMOTE HOST
1111	echo " *** untar current sources on remote host"
1112	if [[ $remote_host != lctit ]]
1113	then
1114	ssh ${remote_username}@${remote_address} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
1115	else
1116	# USING PIPE, BECAUSE TIT ALLOWS SSH TO EXECUTE ONLY SOME SELECTED COMMANDS
1117	echo "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_address} 2>&1
1118	fi
1119
1120
1121	# EXECUTE MAKE WITH THOSE OPTIONS DETERMINED ABOVE
1122	# COMMANDS WILL BE COMMUNICATED TO SSH VIA PIPE, SINCE THIS WAY THE SYSTEM- AND
1123	# USER-PROFILES OF THE SHELL ARE COMPLETELY EXECUTED (OTHERWISE, MAKE
1124	# WILL E.G. MISS THE COMPILER-PATHS)
1125	echo " *** execute \"make\" on remote host"
1126
1127
1128	# GENERATE MAKE CALL WITH MAKE OPTIONS
1129	if [[ $remote_host = nech ]]
1130	then
1131	make_call_string="sxmake $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1132	else
1133	make_call_string="make $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1134	fi
1135
1136	# GENERATE COMMAND TO LOAD MODULES, IF MODULES ARE GIVEN
1137	if [[ "$modules" != "" ]]
1138	then
1139	if [[ $remote_host = lctit ]]
1140	then
1141	module_calls=". $modules"
1142	else
1143	module_calls="module load ${modules};"
1144	fi
1145	else
1146	module_calls=""
1147	fi
1148
1149	if [[ $remote_host = ibmkisti \|\| $remote_host = ibms ]]
1150	then
1151
1152	ssh ${remote_username}@${remote_address} "$init_cmds $module_calls cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1153
1154	elif [[ $remote_host = ibmh ]]
1155	then
1156
1157	echo "$init_cmds $module_calls export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_address} 2>&1 \| tee ${remote_host}_last_make_protokoll
1158
1159	elif [[ $remote_host = lctit ]]
1160	then
1161
1162	echo " " > ${remote_host}_last_make_protokoll
1163	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1164	do
1165	echo "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_address} 2>&1 \| tee ${remote_host}_last_make_protokoll
1166	done
1167
1168	elif [[ $remote_host = lcxe6 ]]
1169	then
1170
1171	ssh ${remote_username}@${remote_address} "$init_cmds $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1172
1173	else
1174
1175	echo "$init_cmds $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_address} 2>&1 \| tee ${remote_host}_last_make_protokoll
1176
1177	fi
1178
1179	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
1180	then
1181	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1182	if [[ $silent = false ]]
1183	then
1184	answer=dummy
1185	printf "\n"
1186	while [[ "$answer" != c && "$answer" != k ]]
1187	do
1188	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1189	read answer
1190	if [[ "$answer" = l ]]
1191	then
1192	more ${remote_host}_last_make_protokoll
1193	fi
1194	done
1195	if [[ $answer = k ]]
1196	then
1197	locat=user_abort; exit
1198	fi
1199	fi
1200	fi
1201
1202
1203
1204	# TAR UPDATED VERSION ON THE REMOTE HOST
1205	printf "\n *** tar update on remote host ..."
1206	if [[ $remote_host != lctit ]]
1207	then
1208	ssh ${remote_username}@${remote_address} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod"
1209	else
1210	# USING PIPE, BECAUSE TIT ALLOWS SSH TO EXECUTE ONLY SOME SELECTED COMMANDS
1211	echo "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod" \| ssh ${remote_username}@${remote_address} 2>&1
1212	fi
1213
1214
1215
1216	# DO THE SAME THINGS FOR THE UTILITY-ROUTINES:
1217	# COPY CURRENT SOURCE CODE TO SOURCE-CODE DIRECTORY ON THE REMOTE HOST
1218	# CREATE THIS DIRECTORY, IF IT DOES NOT EXIST
1219	elif [[ $compile_utility_programs = true ]]
1220	then
1221
1222	printf "\n\n"
1223	echo " *** copying scripts and utility programs to \"${remote_address}:${remote_ud}/\" "
1224	cd ${local_source_path}/../SCRIPTS
1225
1226	if [[ $remote_host != lctit ]]
1227	then
1228	ssh ${remote_username}@${remote_address} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
1229	else
1230	# USING PIPE, BECAUSE TIT ALLOWS SSH TO EXECUTE ONLY SOME SELECTED COMMANDS
1231	echo "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_address} 2>&1
1232	fi
1233
1234	# COPY SHELL-SCRIPTS
1235	scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob batch_nc2vdf nc2vdf nc2vdf.ncl nc2vdf.config ${remote_username}@${remote_address}:${remote_ud}/../SCRIPTS > /dev/null
1236
1237	cd - > /dev/null
1238	cd ${local_source_path}/../UTIL
1239
1240
1241	# COPY UTILITY-ROUTINES
1242	scp Makefile *.f90 ${remote_username}@${remote_address}:${remote_ud} > /dev/null
1243
1244
1245
1246	# EXECUTE MAKE WITH THOSE OPTIONS DETERMINED ABOVE
1247	# COMMANDS WILL BE COMMUNICATED TO SSH VIA PIPE, SINCE THIS WAY THE SYSTEM- AND
1248	# USER-PROFILES OF THE SHELL ARE COMPLETELY EXECUTED (OTHERWISE, MAKE
1249	# WILL E.G. MISS THE COMPILER-PATHS)
1250	echo " *** execute \"make\" on remote host"
1251
1252	if [[ $remote_host = nech ]]
1253	then
1254	make_call_string="sxmake $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1255	else
1256	make_call_string="make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1257	fi
1258
1259	# GENERATE COMMAND TO LOAD MODULES, IF MODULES ARE GIVEN
1260	if [[ "$modules" != "" ]]
1261	then
1262	if [[ $remote_host = lctit ]]
1263	then
1264	module_calls=". $modules"
1265	else
1266	module_calls="module load ${modules};"
1267	fi
1268	else
1269	module_calls=""
1270	fi
1271
1272
1273	if [[ $remote_host = ibms ]]
1274	then
1275
1276	ssh ${remote_username}@${remote_address} "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
1277
1278	elif [[ $remote_host = ibmh ]]
1279	then
1280
1281	echo "$init_cmds $module_calls export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_address}
1282
1283	elif [[ $remote_host = lctit ]]
1284	then
1285
1286	echo " " > ${remote_host}_last_make_protokoll
1287	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1288	do
1289	echo "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_address} 2>&1 \| tee ${remote_host}_last_make_protokoll
1290	done
1291
1292	elif [[ $remote_host = lcxe6 ]]
1293	then
1294
1295	ssh ${remote_username}@${remote_address} "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1296
1297	else
1298
1299	echo "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_address} 2>&1 \| tee ${remote_host}_last_make_protokoll
1300
1301	fi
1302
1303	fi # END OF COMPILING UTILITY-ROUTINES
1304
1305	rm -rf ${remote_host}_last_make_protokoll
1306
1307	# MAKE ON LOCAL HOST
1308	else
1309
1310	# INIT WORKAROUND FOR lcxe6
1311	if [[ $remote_host = lcxe6 \|\| $remote_host = lccrayb \|\| $remote_host = lccrayf \|\| $remote_host = lccrayh ]]
1312	then
1313
1314	eval $init_cmds > /dev/null 2>&1
1315
1316	fi
1317
1318	# FIRST LOAD MODULES, IF GIVEN
1319	if [[ "$modules" != "" ]]
1320	then
1321	if [[ $remote_host = lctit ]]
1322	then
1323	. $modules
1324	elif [[ $remote_host = lcflow ]]
1325	then
1326	eval `$MODULESHOME/bin/modulecmd ksh load ${modules}`
1327	else
1328	eval init_cmds=$init_cmds
1329	module load ${modules}
1330	fi
1331	fi
1332
1333
1334	if [[ $compile_utility_programs = false ]]
1335	then
1336
1337	# CREATE MAKE-DEPOSITORY, IF IT DOES NOT EXIST
1338	eval remote_md=$remote_md
1339	if [[ ! -d $remote_md ]]
1340	then
1341	if mkdir $remote_md
1342	then
1343	printf "\n\n *** directory for make depository:"
1344	printf "\n $remote_md"
1345	printf "\n was created\n"
1346	else
1347	printf "\n +++ directory for make depository:"
1348	printf "\n $remote_md"
1349	printf "\n cannot be created"
1350	locat=local_depository_path; exit
1351	fi
1352	fi
1353
1354	# COPY SOURCE-CODE FROM REPOSITORY TO MAKE-DEPOSITORY
1355	echo " "
1356	echo " *** updating sources in $remote_md"
1357	cd $remote_md
1358	cp $local_source_path/${mainprog}_sources.tar .
1359	tar xf ${mainprog}_sources.tar
1360
1361	# CALL MAKE ON LOCAL HOST USING THE OPTIONS DETERMINED FURTHER ABOVE
1362	echo " "
1363	echo " *** execute \"make\" on local host"
1364
1365	make $make_options PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
1366
1367	if [[ $? != 0 ]]
1368	then
1369	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1370	if [[ $silent = false ]]
1371	then
1372	answer=dummy
1373	printf "\n"
1374	while [[ "$answer" != c && "$answer" != k ]]
1375	do
1376	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1377	read answer
1378	if [[ "$answer" = l ]]
1379	then
1380	more ${remote_host}_last_make_protokoll
1381	fi
1382	done
1383	if [[ $answer = k ]]
1384	then
1385	locat=user_abort; exit
1386	fi
1387	fi
1388	fi
1389
1390
1391	# TAR NEW VERSION ON LOCAL HOST
1392	printf "\n *** tar update on local host ..."
1393	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
1394
1395
1396	# COMPILE THE UTILITY PROGRAMS
1397	elif [[ $compile_utility_programs = true ]]
1398	then
1399	printf "\n\n"
1400	echo " *** compiling the utility programs ..."
1401	cd ${local_source_path}/../UTIL
1402
1403	# TOUCH FILES IN ORDER TO FORCE COMPILATION FOR EVERY BLOCK
1404	touch *.f90
1405	eval init_cmds=$init_cmds
1406	make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
1407
1408	# CHECK IF QMAKE IS AVAILABLE AND COMPILE MRUNGUI
1409	if [[ $util_compiled_localhost == false ]]
1410	then
1411	printf "\n\n"
1412	echo " *** compiling the mrun GUI"
1413	if which qmake >/dev/null; then
1414	cd mrungui
1415	touch *
1416	qmake
1417	make
1418	make clean
1419	rm Makefile
1420	cd ..
1421	else
1422	echo " +++ no qmake found. The (optional) GUI will not be compiled."
1423	fi
1424
1425	# # COMPILE CHECK_NAMELIST_FILES (ONLY FOR ONE BRANCH on LOCALHOST NEEDED)
1426	# printf "\n\n"
1427	# echo " *** compiling check_namelist_files ..."
1428	#
1429	# # GET CHECK OPTIONS
1430	# line=""
1431	# found=false
1432	# grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
1433	# while read line1
1434	# do
1435	#
1436	# if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
1437	# then
1438	# line="$line1"
1439	# fi
1440	#
1441	# if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
1442	# then
1443	# # REMOVE COLONS FROM THE OPTION-STRING, IF THERE ARE ANY
1444	# line="$line "
1445	# copts_check=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g' \| sed 's/-D[^ ]* //g' \| sed 's/ -D.*//g'`
1446	# found=true
1447	# fi
1448	#
1449	# done < $tmp_mbuild
1450	# copts_check="$copts_check -D__check -D__parallel"
1451	#
1452	# check_depository_path=${local_source_path}/../UTIL
1453	# cd $check_depository_path
1454	# mkdir check_tmp
1455	# cp ${local_source_path}/${mainprog}_sources_check.tar ./check_tmp
1456	# cd check_tmp
1457	# tar -xf ${mainprog}_sources_check.tar
1458	# rm -rf ${mainprog}_sources_check.tar
1459	# make -f Makefile_check $make_options F90=$compiler_name_ser COPT="$copts_check" F90FLAGS="$compiler_options"
1460	# tar -cf check_namelist_files.tar Makefile_check check_namelist_files.x .f90 .o *.mod
1461	# mv check_namelist_files.tar $check_depository_path
1462	# mv check_namelist_files.x $PALM_BIN
1463	# cd $check_depository_path
1464	# rm -rf check_tmp
1465	# util_compiled_localhost=true
1466	else
1467	cd $check_depository_path
1468	printf "\n\n"
1469	echo " *** skipped compilation of mrun GUI."
1470	printf "\n\n"
1471	echo " *** skipped compilation of check_namelist_files (currently not available)."
1472	fi
1473
1474	fi
1475	fi
1476	done
1477
1478
1479	if [[ $host_found = false ]]
1480	then
1481	if [[ $host = all ]]
1482	then
1483	printf "\n +++ no hosts found in configuration file"
1484	else
1485	printf "\n +++ host \"$host\" not found in configuration file"
1486	fi
1487	locat=config_file; exit
1488	fi
1489
1490	if [[ "$block_conditions" != none && $block_conditions_found = false ]]
1491	then
1492	printf "\n +++ block conditions \"$block_conditions\" not found for host \"$host\""
1493	fi
1494
1495
1496	# FINAL WORK
1497	rm -f hosts_found_in_config_file
1498	rm -f ${local_source_path}/${mainprog}_sources_check.tar

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |