Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 1044

Last change on this file since 1044 was 1040, checked in by raasch, 12 years ago
script adjustments for lckiaps
Property svn:keywords set to `Id Rev`
File size: 54.4 KB

Line
1	#!/bin/ksh
2	# mbuild - script for compiling the PALM code and its utility programs
3	# $Id: mbuild 1040 2012-11-06 02:14:27Z maronga $
4
5	# Procedure to compile code on local and remote hosts using the
6	# make-mechanism. The source code must be provided on the local host.
7
8	# Last changes:
9	# 06/05/02 - Siggi - start development
10	# 12/06/02 - Siggi - first version finished
11	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) included
12	# 19/12/02 - Siggi - ibmb included
13	# 05/02/03 - Siggi - hostname nobela included
14	# 04/03/03 - Siggi - host nech included
15	# 06/03/03 - Siggi - make_call_string is echoed without '' to
16	# file LAST_MAKE_CALL (otherwise error on NEC, because
17	# '' are part of compiler options
18	# 16/03/03 - Siggi - Two underscores are placed in front of every define
19	# string, in case that palm.f90 version contains
20	# such strings
21	# 16/04/03 - Siggi - First extensions for linux machines
22	# 24/06/03 - Siggi - host orkan included
23	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
24	# 24/07/03 - Siggi - host maestro admitted
25	# 06/08/03 - Siggi - host gregale admitted
26	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
27	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
28	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
29	# (-D$OMP=OMP) in order to avoid problems with
30	# OMP_NUM_THREADS
31	# 09/01/04 - Siggi - action above cancelled
32	# 28/01/04 - Siggi - action above re-cancelled
33	# 08/03/04 - Siggi - host scirocco admitted
34	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
35	# the respective .f90 file is not listed in the makefile
36	# and deletion is demanded by the user
37	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
38	# due to error in ssh installation (otherwise a prompt
39	# for the password appears)
40	# 23/07/04 - Siggi - changes due to the new berni configuration
41	# (federation switch)
42	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
43	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
44	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
45	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
46	# 24/04/05 - Siggi - netcdf support on lcmuk
47	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
48	# 12/05/05 - Siggi - netcdf support on ibm
49	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
50	# 18/05/05 - Siggi - netcdf support on nec
51	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
52	# 23/05/05 - Siggi - netcdf support on ibms
53	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
54	# 30/06/05 - Siggi - netcdf support on bora
55	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
56	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
57	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
58	# host gfdl5 (ibmy) admitted
59	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
60	# 20/01/06 - Siggi - cpp directive for ibmy
61	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
62	# 10/02/06 - Siggi - modifications for scp on decalpha
63	# 13/04/06 - Siggi - ostria admitted
64	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
65	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
66	# 29/05/05 - Siggi - atmos (lcide) admitted
67	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
68	# 24/11/06 - Siggi - breva and levanto admitted
69	# 07/02/07 - Siggi - adapted for RIAM (neck)
70	# 10/02/07 - Siggi - all hpmuk-related code removed
71	# 02/03/07 - Siggi - compilation of utility programs and transfer of
72	# scripts to remote hosts added (option -u)
73	# 14/03/07 - Siggi - fimm admitted, revision number added to terminal
74	# output
75	# 16/03/07 - Siggi - adjustments (netcdf) for lctit
76	# adjustments for running under pdksh, local ip-addres
77	# is not determined any more
78	# 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
79	# from configuration file
80	# host identifier (local_host) is read from config file
81	# 10/10/07 - Siggi - bugfix: handling of comment lines
82	# 18/07/08 - Siggi - adapted for lcsgih
83	# 21/07/08 - Siggi - mainprog (executable) is added to the tar-file
84	# ({mainprog}_current_version)
85	# 02/10/08 - Siggi - adapted for lcxt4
86	# 14/11/08 - Siggi - update mechanism completely revised: source tarfile
87	# remains in source directory, one depository per block
88	# (given in the config-file) is created, allways all
89	# files from the source directory are copied to the
90	# respective depository, no additional file checks are
91	# done any more (version 2.1)
92	# 13/01/09 - Marcus- re-enable compilation more than once on lcmuk (as on
93	# other machines)
94	# 21/03/09 - Siggi - -u copies also copies process_dvr_output and
95	# .dvrserver.config
96	# 21/04/09 - Siggi - adjustments for new IBM at DKRZ, which is now ibmh
97	# 25/08/09 - BjornM- adapted for lck
98	# 01/12/09 - BjornM- re-adjustments for lcxt4
99	# 01/02/10 - Siggi - adjustments for lcxt5m
100	# 03/02/10 - Siggi - make options (mopts) to be set by configuration file
101	# implemented, remoted mode option -r completely
102	# removed, t3e related parts removed
103	# 26/02/10 - BjornM- re-adjustments for lcxt4 (new modules)
104	# 01/03/10 - Siggi - mpilib replaced by modules: explicit module settings
105	# removed; modules should now be given in the
106	# configuration file
107	# 02/03/10 - Siggi - utility programs are created separately for each
108	# block in the configuration file,
109	# parallel make for utility programs
110	# 12/03/10 - Siggi - bugfix: remode_md was given a wrong value
111	# 16/08/10 - BjornM- bugfix: call of modules on local host, new workaround
112	# for lcxt4
113	# 07/09/10 - Siggi - bugfix for wrong netcdf/3.6.3 module on lcsgi
114	# 08/12/10 - Siggi - initialization of the module command changed for
115	# SGI-ICE/lcsgi
116	# adjustments for Kyushu Univ. (lcrte, ibmku)
117	# 14/12/10 - Siggi - adjustments for new Tsubame system at Tokyo
118	# institute of technology (lctit)
119	# 04/03/11 - BjornM- re-adjustments for lcxt4
120	# 06/03/11 - Siggi - adjustments for ibmkisti
121	# 03/04/11 - Micha - added lckordi
122	# 17/08/11 - Siggi - HLRN access via hicegate0 (130.75.4.101)
123	# 27/11/11 - Siggi - Bugfix for make options setting (-j)
124	# 12/12/11 - BjornM- added mrun GUI to ulitity programs
125	# 25/01/12 - BjornM- compilation of check_namelist_files (namelist file
126	# check program) has been added to the utility branch),
127	# modfified the compilation of mrungui
128	# 31/01/12 - BjornM- bugfix for compilation of utility programs on
129	# multiple localhost branches
130	# 08/03/12 - BjornM- bugfix: cpp directive for namelist check program
131	# corrected
132	# 02/05/12 - Bjoern- lcxt4 is now lcxe6, adjustments for lcxe6,
133	# bugfixes for the parameter file check, initial
134	# commands on ssh calls sourced out to .mrun.config
135	# 05/06/12 - Bjoern- bugfixes for execution of login_init_cmd
136	# 18/06/12 - Siggi - option -v (silent mode) added
137	# 25/06/12 - Siggi - option -K (block conditions) added
138	# 27/09/12 - Siggi - compiler options (F90FLAGS) added for namelist check
139	# 02/10/12 - Siggi - added lcsb
140	# 02/11/12 - Siggi - added lckiaps
141
142
143	# VARIABLE DECLARATIONS + DEFAULT VALUES
144	block_conditions=none
145	block_conditions_found=false
146	compile_utility_programs=false
147	config_file=.mrun.config
148	fimm=false
149	host=all
150	host_found=false
151	locat=normal
152	makefile=""
153	module_calls=""
154	util_compiled_localhost=false
155	scirocco=false
156	silent=false
157	suf=f90
158	update=false
159	working_directory=`pwd`
160
161	typeset -i ih ihost=0
162
163	typeset -R30 calltime
164	typeset -L20 column1
165	typeset -L50 column2
166	typeset -L70 column3
167	typeset -L40 version="MBUILD 2.1 Rev$Rev: 1040 $"
168
169	# ERROR HANDLING
170	# IN CASE OF EXIT:
171	trap 'rm -rf $working_directory/tmp_mbuild
172	if [[ $locat != normal ]]
173	then
174	printf "\n\n +++ mbuild killed \n\n"
175	else
176	printf "\n\n *** mbuild finished \n\n"
177	fi' exit
178
179
180	# IN CASE OF TERMINAL-BREAK:
181	trap 'rm -rf $working_directory/tmp_mbuild
182	printf "\n\n +++ mbuild killed by \"^C\" \n\n"
183	exit
184	' 2
185
186
187	tmp_mbuild=${working_directory}/tmp_mbuild
188
189	# READ SHELLSCRIPT-OPTIONS
190	while getopts :c:h:K:m:s:uv option
191	do
192	case $option in
193	(c) config_file=$OPTARG;;
194	(h) host=$OPTARG;;
195	(K) block_conditions=$OPTARG;;
196	(m) makefile=$OPTARG;;
197	(s) suf=$OPTARG;;
198	(u) compile_utility_programs=true;;
199	(v) silent=true;;
200	(\?) printf "\n +++ unknown option $OPTARG \n";
201	locat=parameter; exit;;
202	esac
203	done
204
205
206
207	# CHECK, IF CONFIGURATION-FILE EXISTS
208	if [[ ! -f $config_file ]]
209	then
210	printf "\n +++ configuration file: "
211	printf "\n $config_file"
212	printf "\n does not exist"
213	locat=configuration; exit
214	fi
215
216
217
218	# DETERMINE THE LOCAL HOST
219	local_host_real_name=$(hostname)
220	# local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
221
222
223
224	# DETERMINE HOST-IDENTIFIER (local_host) FROM THE CONFIG-FILE
225	line=""
226	grep "%host_identifier" $config_file > $tmp_mbuild
227	while read line
228	do
229	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
230	then
231	HOSTNAME=`echo $line \| cut -d" " -s -f2`
232	host_identifier=`echo $line \| cut -d" " -s -f3`
233	if [[ $local_host_real_name = $HOSTNAME ]]
234	then
235	local_host=$host_identifier
236	break
237	fi
238	fi
239	done < $tmp_mbuild
240
241	if [[ "$local_host" = "" ]]
242	then
243	printf "\n +++ no host identifier found in configuration file \"$config_file\""
244	printf "\n for local host \"$local_host_real_name\"."
245	printf "\n Please add line"
246	printf "\n \"\%host_identifier $local_host_real_name <identifier>\""
247	printf "\n to the configuration file."
248	locat=local_host; exit
249	fi
250
251
252
253	[[ $local_host_real_name = scirocco ]] && scirocco=true
254	[[ $local_host_real_name = fimm.bccs.uib.no ]] && fimm=true
255
256
257
258	if [[ $local_host != ibms ]]
259	then
260	config_file=$PWD/$config_file
261	else
262	config_file=`pwd`/$config_file
263	fi
264
265
266	# determine the block conditions
267	if [[ $block_conditions != none ]]
268	then
269	block_condition1=`echo $block_conditions \| cut -d" " -f1`
270	block_condition2=`echo $block_conditions \| cut -d" " -f2`
271	if [[ "$block_condition2" = "$block_condition1" ]]
272	then
273	block_condition2=""
274	fi
275	fi
276
277
278	# DETERMINE USER NAME ON LOCAL HOST FROM THE CONFIG-FILE
279	line=""
280	grep " $local_host" $config_file \| grep "%remote_username" > $tmp_mbuild
281	while read line
282	do
283	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
284	then
285	local_username=`echo $line \| cut -d" " -s -f2`
286	fi
287	done < $tmp_mbuild
288
289
290	if [[ "$local_username" = "" ]]
291	then
292	printf "\n +++ no user name found in configuration file"
293	printf "\n for local host \"$local_host\" "
294	locat=config_file; exit
295	fi
296
297
298	# DETERMINE LOCAL SOURCE-CODE PATH.
299	# FIRST CHECK, IF A GLOBAL SOURCE-CODE PATH HAS BEEN DECLARED FOR ALL HOSTS.
300	# THEREFORE, FIRST SET ALL GLOBAL VARIABLES DECLARED IN THE CONFIG-FILE,
301	# BECAUSE THEY MAY BE USED AS PART OF THE PATH NAME.
302	line=""
303	grep "%" $config_file > $tmp_mbuild
304	while read line
305	do
306	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" && $(echo $line \| cut -c1) != "#" ]]
307	then
308	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
309	value=`echo $line \| cut -d" " -s -f2`
310	eval export $var=\$value
311	fi
312	done < $tmp_mbuild
313
314	# NOW CHECK, IF A GLOBAL SOURCE-CODE-PATH HAS BEEN DECLARED
315	line=""
316	grep "%source_path" $config_file > $tmp_mbuild
317	while read line
318	do
319	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
320	then
321	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
322	then
323	global_source_path=`echo $line \| cut -d" " -s -f2`
324	fi
325	fi
326	done < $tmp_mbuild
327
328	line=""
329	grep " $local_host" $config_file \| grep "%source_path" > $tmp_mbuild
330	while read line
331	do
332	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
333	then
334	local_source_path=`echo $line \| cut -d" " -s -f2`
335	fi
336	done < $tmp_mbuild
337
338	if [[ "$local_source_path" = "" ]]
339	then
340	if [[ "$global_source_path" != "" ]]
341	then
342	local_source_path=$global_source_path
343	else
344	printf "\n +++ no source path found in configuration file"
345	printf "\n for local host \"$local_host\" "
346	printf "\n please set \"\%source_path\" in configuration file"
347	locat=config_file; exit
348	fi
349	fi
350	eval local_source_path=$local_source_path
351	eval local_source_path=$local_source_path
352
353
354
355	# DETERMINE GLOBAL DEPOSITORY-PATH
356	line=""
357	grep "%depository_path" $config_file > $tmp_mbuild
358	while read line
359	do
360	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
361	then
362	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
363	then
364	global_depository_path=`echo $line \| cut -d" " -s -f2`
365	fi
366	fi
367	done < $tmp_mbuild
368
369	if [[ $found = false ]]
370	then
371	printf "\n +++ no \%depository_path found in"
372	printf "\n $config_file"
373	locat=depository_path; exit
374	fi
375
376	# CHECK, IF A MAIN PROGRAM HAS BEEN DEFINED IN THE CONFIG-FILE
377	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
378	then
379	printf "\n +++ no main program or more than one main program defined"
380	printf "\n in configuration file"
381	locat=configuration; exit
382	else
383	line=`grep "%mainprog" $config_file`
384	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
385	then
386	printf "\n +++ no main program defined in configuration file"
387	locat=configuration; exit
388	fi
389	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
390	fi
391
392
393
394	# CHECK IF MAKEFILE EXITS
395	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
396	if [[ ! -f $makefile ]]
397	then
398	printf "\n +++ makefile: "
399	printf "\n $makefile"
400	printf "\n does not exist"
401	locat=makefile; exit
402	fi
403
404
405	# HEADER-OUTPUT (PART1: MESSAGES CONCERNING THE LOCAL HOST)
406	calltime=$(date)
407	printf "\n"
408	printf "#------------------------------------------------------------------------# \n"
409	printf "\| $version$calltime \| \n"
410	printf "\| \| \n"
411	column1="called on:"; column2=$local_host_real_name
412	printf "\| $column1$column2 \| \n"
413	column1="local username:"; column2=$local_username
414	printf "\| $column1$column2 \| \n"
415	column1="local IP-addres:"; column2=$local_addres
416	printf "\| $column1$column2 \| \n"
417	column1="config file:"; column2=$config_file
418	printf "\| $column1$column2 \| \n"
419	column1="makefile:"; column2=$makefile
420	printf "\| $column1$column2 \| \n"
421	column1="local source path:"; column2=$local_source_path
422	printf "\| $column1$column2 \| \n"
423	printf "#------------------------------------------------------------------------# \n"
424
425	# printf "\| \| \n"
426
427
428	if [[ $compile_utility_programs = false ]]
429	then
430
431	# IN ANY CASE, GIVE ALL FILES WRITE-PERMIT, IN ORDER TO AVOID PROBLEMS
432	# WITH OVERWRITING FILES ON THE REMOTE HOST
433	cd $local_source_path
434	printf "\n\n *** tar of makefile and source files in $local_source_path"
435	tar -cf ${mainprog}_sources.tar Makefile *.$suf
436	printf "\n"
437
438	else
439	cd $local_source_path
440	printf "\n\n *** tar of makefile and source files in $local_source_path"
441
442	cat Makefile_check\|while read line
443	do
444	line=$(echo $line\|grep RCS)
445	if [[ $line == "RCS" ]]
446	then
447	line=$(echo $line\|sed 's/RCS = //g')
448	break
449	fi
450	done
451
452	tar -cf ${mainprog}_sources_check.tar Makefile_check $line
453	printf "\n"
454	fi
455
456
457
458	# GET CONFIRMATION TO CONTINUE
459	if [[ $host = all ]]
460	then
461	printf "\n *** updates will be made for ALL hosts found in"
462	printf "\n the configuration file"
463	else
464	printf "\n *** update will be made for host \"$host\" "
465	fi
466
467	if [[ $silent = false ]]
468	then
469	answer=dummy
470	printf "\n\n"
471	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
472	do
473	printf " >>> continue (y/n) ? "
474	read answer
475	done
476	if [[ $answer = n \|\| $answer = N ]]
477	then
478	locat=user_abort; exit
479	fi
480	fi
481
482
483
484
485	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
486	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
487	printf "\n *** scanning configuration file for host(s) ..."
488
489	grep %fopts $config_file > $tmp_mbuild
490	while read line
491	do
492	# KOMMENTARZEILEN UEBERSPRINGEN
493	[[ $(echo $line \| cut -c1) = "#" ]] && continue
494	(( ihost = ihost + 1 ))
495	hostline[$ihost]="$line"
496	done < $tmp_mbuild
497
498
499	while (( ih < ihost ))
500	do
501
502	(( ih = ih + 1 ))
503
504	# determine remote host and conditions for the respective block
505	# continue, only if this host has been chosen via -h option and if
506	# conditions have been chosen via -K option
507	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
508	remote_host=`echo $remote_host_string \| cut -d" " -f1`
509	if [[ $host != all ]]
510	then
511	[[ $remote_host != $host ]] && continue
512	fi
513	host_found=true
514	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
515	if [[ $condition1 = $remote_host ]]
516	then
517	condition1=""
518	else
519	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
520	fi
521
522	if [[ $block_conditions != none ]]
523	then
524	if [[ "$condition1" != "$block_condition1" \|\| "$condition2" != "$block_condition2" ]]
525	then
526	continue
527	fi
528	block_conditions_found=true
529	fi
530
531	modules=""
532	netcdf_inc=""
533	netcdf_lib=""
534	make_options=""
535
536	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
537	case $remote_host in
538	(lckordi) remote_adress=210.219.61.8;;
539	(lcmuk) remote_addres=130.75.105.2;;
540	(lcrte) remote_addres=133.5.185.60;;
541	(lcsb) remote_adress=147.46.30.151;;
542	(lcsgib) remote_addres=130.73.232.102;;
543	(lcsgih) remote_addres=130.75.4.101;;
544	(lck) remote_addres=165.132.26.61;;
545	(lckiaps) remote_addres=118.128.66.223;;
546	(lctit) remote_addres=10.1.6.170;;
547	(lcxe6) remote_addres=129.177.20.113;;
548	(lcxt5m) remote_addres=193.166.211.144;;
549	(decalpha) remote_addres=165.132.26.56;;
550	(ibmh) remote_addres=136.172.40.15;;
551	(ibmkisti) remote_addres=150.183.146.24;;
552	(ibmku) remote_addres=133.5.4.129;;
553	(ibms) remote_addres=150.183.5.101;;
554	(ibmy) remote_addres=165.132.26.58;;
555	(nech) remote_addres=136.172.44.192;;
556	(neck) remote_addres=133.5.178.11;;
557	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
558	(*) if [[ $local_host != $remote_host ]]
559	then
560	printf "\n +++ remote host \"$remote_host\" unknown";
561	printf "\n please inform PALM group support!"
562	locat=remote_host; exit
563	fi;;
564	esac
565
566
567	# REMOTE-USERNAMEN ERMITTELN
568	line=""
569	found=false
570	grep "$remote_host_string" $config_file \| grep "%remote_username" > $tmp_mbuild
571	while read line1
572	do
573
574	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
575	then
576	line="$line1"
577	fi
578
579	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
580	then
581	remote_username=`echo $line \| cut -d" " -s -f2`
582	found=true
583	fi
584
585	done < $tmp_mbuild
586
587	if [[ $found = false ]]
588	then
589	printf "\n +++ no remote username found in configuration file"
590	printf "\n for \"$remote_host_string\" "
591	locat=config_file; exit
592	fi
593
594
595	# REMOTE-QUELLTEXTPFAD ERMITTELN
596	line=""
597	remote_source_path=""
598	grep "$remote_host_string" $config_file \| grep "%source_path" > $tmp_mbuild
599	while read line1
600	do
601
602	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
603	then
604	line="$line1"
605	fi
606
607	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
608	then
609	remote_source_path=`echo $line \| cut -d" " -s -f2`
610	fi
611
612	done < $tmp_mbuild
613
614	if [[ "$remote_source_path" = "" ]]
615	then
616	if [[ "$global_source_path" != "" ]]
617	then
618	remote_source_path=$global_source_path
619	else
620	printf "\n +++ no source path found in configuration file"
621	printf "\n for \"$remote_host_string\" "
622	locat=config_file; exit
623	fi
624	fi
625
626	remote_ud=${remote_source_path}/../UTIL
627	remote_ud=$(eval echo $remote_ud)
628
629
630	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
631	remote_md=""
632	line=""
633	grep "$remote_host_string" $config_file \| grep "%depository_path" > $tmp_mbuild
634	while read line1
635	do
636
637	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
638	then
639	line="$line1"
640	fi
641
642	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
643	then
644	remote_md=`echo $line \| cut -d" " -s -f2`
645	fi
646
647	done < $tmp_mbuild
648
649	if [[ "$remote_md" = "" ]]
650	then
651	if [[ "$global_depository_path" != "" ]]
652	then
653	remote_md=$global_depository_path
654	else
655	printf "\n +++ no depository path found in configuration file"
656	printf "\n for \"$remote_host_string\" "
657	printf "\n please set \"\%depository_path\" in configuration file"
658	locat=config_file; exit
659	fi
660	fi
661
662	remote_md=$(eval echo $remote_md)
663	block=""
664	[[ "$condition1" != "" ]] && block=_$condition1
665	[[ "$condition2" != "" ]] && block=${block}_$condition2
666	remote_md=${remote_md}$block
667
668
669	# COMPILERNAMEN ERMITTELN
670	line=""
671	found=false
672	grep "$remote_host_string" $config_file \| grep "%compiler_name " > $tmp_mbuild
673	while read line1
674	do
675
676	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
677	then
678	line="$line1"
679	fi
680
681	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
682	then
683	compiler_name=`echo $line \| cut -d" " -s -f2`
684	found=true
685	fi
686
687	done < $tmp_mbuild
688
689	if [[ $found = false ]]
690	then
691	printf "\n +++ no compiler name found in configuration file"
692	printf "\n for \"$remote_host_string\" "
693	locat=config_file; exit
694	fi
695
696
697	# BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
698	# SERIELLER COMPILERNAME ERMITTELT WERDEN
699	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
700	then
701	line=""
702	found=false
703	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" > $tmp_mbuild
704	while read line1
705	do
706
707	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
708	then
709	line="$line1"
710	fi
711
712	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
713	then
714	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
715	found=true
716	fi
717
718	done < $tmp_mbuild
719
720	if [[ $found = false ]]
721	then
722	printf "\n +++ no serial compiler name found in configuration file"
723	printf "\n for \"$remote_host_string\" "
724	locat=config_file; exit
725	fi
726	else
727	compiler_name_ser=$compiler_name
728	fi
729
730
731
732	# PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
733	line=""
734	found=false
735	grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
736	while read line1
737	do
738
739	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
740	then
741	line="$line1"
742	fi
743
744	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
745	then
746	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
747	cpp_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
748	found=true
749	fi
750
751	done < $tmp_mbuild
752
753	if [[ $found = false ]]
754	then
755	printf "\n +++ no preprocessor options found in configuration file"
756	printf "\n for \"$remote_host_string\" "
757	locat=config_file; exit
758	fi
759
760
761	# RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
762	for string in $remote_host_string
763	do
764	if [[ $(echo $remote_host \| cut -c1-2) = lc && $(echo $string \| cut -c1-2) = lc ]]
765	then
766	cpp_options="$cpp_options -D__lc "
767	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $(echo $string \| cut -c1-3) = ibm ]]
768	then
769	cpp_options="${cpp_options},-D__ibm"
770	elif [[ $(echo $remote_host \| cut -c1-3) = nec && $(echo $string \| cut -c1-3) = nec ]]
771	then
772	cpp_options="${cpp_options} -D__nec"
773	else
774	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
775	then
776	cpp_options="${cpp_options},-D__$string"
777	else
778	cpp_options="$cpp_options -D__$string "
779	fi
780	fi
781	done
782
783
784
785	# NETCDF-OPTIONEN ERMITTELN
786	line=""
787	grep "$remote_host_string" $config_file \| grep "%netcdf_inc" > $tmp_mbuild
788	while read line1
789	do
790
791	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
792	then
793	line="$line1"
794	fi
795
796	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
797	then
798	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
799	netcdf_inc=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
800	fi
801
802	done < $tmp_mbuild
803
804	line=""
805	grep "$remote_host_string" $config_file \| grep "%netcdf_lib" > $tmp_mbuild
806	while read line1
807	do
808
809	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
810	then
811	line="$line1"
812	fi
813
814	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
815	then
816	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
817	netcdf_lib=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
818	fi
819
820	done < $tmp_mbuild
821
822
823
824	# get make options
825	line=""
826	found=false
827	grep "$remote_host_string" $config_file \| grep "%mopts" > $tmp_mbuild
828	while read line1
829	do
830
831	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
832	then
833	line="$line1"
834	fi
835
836	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
837	then
838	# remove colons from directive string
839	make_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
840
841	fi
842
843	done < $tmp_mbuild
844
845
846
847	# COMPILEROPTIONEN ERMITTELN
848	line=""
849	found=false
850	grep "$remote_host_string" $config_file \| grep "%fopts" > $tmp_mbuild
851	while read line1
852	do
853
854	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
855	then
856	line="$line1"
857	fi
858
859	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
860	then
861	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
862	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
863	found=true
864
865	# NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
866	compiler_options="$compiler_options $netcdf_inc"
867	fi
868
869	done < $tmp_mbuild
870
871	if [[ $found = false ]]
872	then
873	printf "\n +++ no compiler options found in configuration file"
874	printf "\n for \"$remote_host_string\" "
875	locat=config_file; exit
876	fi
877
878
879	# get login init commands, "::" is replacing a space
880	line=""
881	grep "$remote_host_string" $config_file \| grep "%login_init_cmd" > $tmp_mbuild
882	while read line1
883	do
884
885	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
886	then
887	line="$line1"
888	fi
889
890	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
891	then
892	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
893	init_cmds=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
894	fi
895	init_cmds="${init_cmds};"
896	done < $tmp_mbuild
897
898
899	# get modules to be loaded
900	line=""
901	grep "$remote_host_string" $config_file \| grep "%modules" > $tmp_mbuild
902	while read line1
903	do
904
905	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
906	then
907	line="$line1"
908	fi
909
910	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
911	then
912	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
913	modules=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
914	fi
915
916	done < $tmp_mbuild
917
918
919	# LADER-OPTIONEN ERMITTELN
920	line=""
921	found=false
922	grep "$remote_host_string" $config_file \| grep "%lopts" > $tmp_mbuild
923	while read line1
924	do
925
926	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
927	then
928	line="$line1"
929	fi
930
931	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
932	then
933	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
934	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
935	found=true
936
937	# NETCDF-LIBRARY HINZUFUEGEN
938	loader_options="$loader_options $netcdf_lib"
939	fi
940
941	done < $tmp_mbuild
942
943	if [[ $found = false ]]
944	then
945	printf "\n +++ no loader options found in configuration file"
946	printf "\n for \"$remote_host_string\" "
947	locat=config_file; exit
948	fi
949
950
951	printf "\n\n#------------------------------------------------------------------------# \n"
952	if [[ $remote_host = $local_host ]]
953	then
954	column1="remote_host:"; column2="$remote_host (= local host!)"
955	else
956	column1="remote_host:"; column2=$remote_host
957	fi
958	printf "\| $column1$column2 \| \n"
959	printf "\| \| \n"
960	column1="conditions:"; column2="$condition1 $condition2"
961	printf "\| $column1$column2 \| \n"
962	column1="make depository:"; column2=$remote_md
963	printf "\| $column1$column2 \| \n"
964	line=$(echo "$remote_md" \| cut -c51-)
965	while [[ "$line" != "" ]]
966	do
967	column1=""
968	column2=$line
969	printf "\| $column1$column2 \| \n"
970	line=$(echo "$line" \| cut -c51-)
971	done
972	if [[ $compile_utility_programs = true ]]
973	then
974	column1="utility directory:"; column2=$remote_ud
975	printf "\| $column1$column2 \| \n"
976	fi
977	column1="username:"; column2=$remote_username
978	printf "\| $column1$column2 \| \n"
979	column1="addres:"; column2=$remote_addres
980	printf "\| $column1$column2 \| \n"
981	column1="compiler:"; column2=$compiler_name
982	printf "\| $column1$column2 \| \n"
983	if [[ $compile_utility_programs = true ]]
984	then
985	column1="serial compiler:"; column2=$compiler_name_ser
986	printf "\| $column1$column2 \| \n"
987	fi
988	if [[ "$make_options" != "" ]]
989	then
990	column1="make options:"; column2=$make_options
991	printf "\| $column1$column2 \| \n"
992	fi
993	column1="cpp options:"; column2=$cpp_options
994	printf "\| $column1$column2 \| \n"
995	line=$(echo "$cpp_options" \| cut -c51-)
996	while [[ "$line" != "" ]]
997	do
998	column1=""
999	column2=$line
1000	printf "\| $column1$column2 \| \n"
1001	line=$(echo "$line" \| cut -c51-)
1002	done
1003	column1="compiler options:"; column2=$compiler_options
1004	printf "\| $column1$column2 \| \n"
1005	line=$(echo "$compiler_options" \| cut -c51-)
1006	while [[ "$line" != "" ]]
1007	do
1008	column1=""
1009	column2=$line
1010	printf "\| $column1$column2 \| \n"
1011	line=$(echo "$line" \| cut -c51-)
1012	done
1013	column1="loader options:"; column2=$loader_options
1014	printf "\| $column1$column2 \| \n"
1015	line=$(echo "$loader_options" \| cut -c51-)
1016	while [[ "$line" != "" ]]
1017	do
1018	column1=""
1019	column2=$line
1020	printf "\| $column1$column2 \| \n"
1021	line=$(echo "$line" \| cut -c51-)
1022	done
1023	if [[ $modules != "" ]]
1024	then
1025	column1="modules to be load:"; column2=$modules
1026	printf "\| $column1$column2 \| \n"
1027	line=$(echo "$modules" \| cut -c51-)
1028	while [[ "$line" != "" ]]
1029	do
1030	column1=""
1031	column2=$line
1032	printf "\| $column1$column2 \| \n"
1033	line=$(echo "$line" \| cut -c51-)
1034	done
1035	fi
1036	printf "#------------------------------------------------------------------------# \n"
1037
1038	if [[ $silent = false ]]
1039	then
1040	answer=dummy
1041	printf "\n\n"
1042	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
1043	do
1044	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
1045	read answer
1046	done
1047	if [[ $answer = a \|\| $answer = A ]]
1048	then
1049	locat=user_abort; exit
1050	fi
1051	if [[ $answer = c \|\| $answer = C ]]
1052	then
1053	silent=true
1054	fi
1055	if [[ $answer = s \|\| $answer = S ]]
1056	then
1057	continue
1058	fi
1059	fi
1060
1061
1062	# make on remote host
1063	if [[ $remote_host != $local_host ]]
1064	then
1065	if [[ $compile_utility_programs = false ]]
1066	then
1067
1068	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1069	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1070	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
1071	if [[ $remote_host != lctit ]]
1072	then
1073	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
1074	else
1075	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1076	# MIT SSH, DESHALB AUFRUF PER PIPE
1077	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
1078	fi
1079	if [[ $local_host = decalpha ]]
1080	then
1081	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1082	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1083	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1084	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
1085	/bin/scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1086	else
1087	scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1088	fi
1089
1090
1091
1092	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
1093	echo " *** untar previous update on remote host, if existing"
1094	if [[ $remote_host != lctit ]]
1095	then
1096	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
1097	else
1098	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1099	# MIT SSH, DESHALB AUFRUF PER PIPE
1100	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1101	fi
1102
1103
1104	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1105	echo " *** untar actual sources on remote host"
1106	if [[ $remote_host != lctit ]]
1107	then
1108	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
1109	else
1110	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1111	# MIT SSH, DESHALB AUFRUF PER PIPE
1112	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
1113	fi
1114
1115
1116	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1117	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1118	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1119	# Z.B. DIE PFADE ZUM COMPILER)
1120	echo " *** execute \"make\" on remote host"
1121
1122
1123	# generate make call with make options
1124	if [[ $remote_host = nech ]]
1125	then
1126	make_call_string="sxmake $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1127	else
1128	make_call_string="make $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1129	fi
1130
1131	# generate command to load modules, if modules are given
1132	if [[ "$modules" != "" ]]
1133	then
1134	if [[ $remote_host = lctit ]]
1135	then
1136	module_calls=". $modules"
1137	else
1138	module_calls="module load ${modules};"
1139	fi
1140
1141	# bugfix for wrong netcdf module
1142	if [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
1143	then
1144	if [[ $(echo $module_calls \| grep -c netcdf/3.6.3-intel) != 0 ]]
1145	then
1146	module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
1147	fi
1148	fi
1149	else
1150	module_calls=""
1151	fi
1152
1153	if [[ $remote_host = ibmkisti \|\| $remote_host = ibms \|\| $remote_host = ibmy ]]
1154	then
1155
1156	ssh ${remote_username}@${remote_addres} "$init_cmds $module_calls cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1157
1158	elif [[ $remote_host = ibmh ]]
1159	then
1160
1161	print "$init_cmds $module_calls export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1162
1163	elif [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
1164	then
1165	# print ". /usr/share/modules/init/bash; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1166	print "$init_cmds $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1167
1168	elif [[ $remote_host = lctit ]]
1169	then
1170
1171	echo " " > ${remote_host}_last_make_protokoll
1172	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1173	do
1174	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1175	done
1176
1177	elif [[ $remote_host = lcxe6 ]]
1178	then
1179
1180	ssh ${remote_username}@${remote_addres} "$init_cmds $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1181
1182	else
1183
1184	print "$init_cmds $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1185
1186	fi
1187
1188	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
1189	then
1190	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1191	if [[ $silent = false ]]
1192	then
1193	answer=dummy
1194	printf "\n"
1195	while [[ "$answer" != c && "$answer" != k ]]
1196	do
1197	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1198	read answer
1199	if [[ "$answer" = l ]]
1200	then
1201	more ${remote_host}_last_make_protokoll
1202	fi
1203	done
1204	if [[ $answer = k ]]
1205	then
1206	locat=user_abort; exit
1207	fi
1208	fi
1209	fi
1210
1211
1212
1213	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1214	printf "\n *** tar update on remote host ..."
1215	if [[ $remote_host != lctit ]]
1216	then
1217	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod"
1218	else
1219	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1220	# MIT SSH, DESHALB AUFRUF PER PIPE
1221	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
1222	fi
1223
1224
1225	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1226	# printf "\n *** \"make clean\" on remote host ..."
1227	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
1228	# printf "\n"
1229
1230
1231
1232
1233	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
1234	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1235	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1236	elif [[ $compile_utility_programs = true ]]
1237	then
1238
1239	printf "\n\n"
1240	echo " *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
1241	cd ${local_source_path}/../SCRIPTS
1242
1243	if [[ $remote_host != lctit ]]
1244	then
1245	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
1246	else
1247	# TIT ERLAUBT NUR DIE AUSFUEHRUNG GANZ BESTIMMTER KOMMANDOS
1248	# MIT SSH, DESHALB AUFRUF PER PIPE
1249	print "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_addres} 2>&1
1250	fi
1251
1252	# KOPIEREN DER SCRIPTE
1253	if [[ $local_host = decalpha ]]
1254	then
1255	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTAENDIGEN PFADES
1256	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1257	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1258	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1259	/bin/scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1260	else
1261	scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
1262	fi
1263
1264	cd - > /dev/null
1265	cd ${local_source_path}/../UTIL
1266
1267
1268	# KOPIEREN DER UTILITY-PROGRAMME
1269	if [[ $local_host = decalpha ]]
1270	then
1271	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
1272	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1273	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1274	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
1275	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1276	else
1277	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
1278	fi
1279
1280
1281
1282	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1283	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1284	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1285	# Z.B. DIE PFADE ZUM COMPILER)
1286	echo " *** execute \"make\" on remote host"
1287
1288	if [[ $remote_host = nech ]]
1289	then
1290	make_call_string="sxmake $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1291	else
1292	make_call_string="make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
1293	fi
1294
1295	# generate command to load modules, if modules are given
1296	if [[ "$modules" != "" ]]
1297	then
1298	if [[ $remote_host = lctit ]]
1299	then
1300	module_calls=". $modules"
1301	else
1302	module_calls="module load ${modules};"
1303	fi
1304
1305	# bugfix for wrong netcdf module
1306	if [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
1307	then
1308	if [[ $(echo $module_calls \| grep -c netcdf/3.6.3-intel) != 0 ]]
1309	then
1310	module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
1311	fi
1312	fi
1313	else
1314	module_calls=""
1315	fi
1316
1317
1318	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
1319	then
1320
1321	ssh ${remote_username}@${remote_addres} "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
1322
1323	elif [[ $remote_host = ibmh ]]
1324	then
1325
1326	print "$init_cmds $module_calls export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres}
1327
1328	elif [[ $remote_host = lctit ]]
1329	then
1330
1331	echo " " > ${remote_host}_last_make_protokoll
1332	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
1333	do
1334	print "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1335	done
1336
1337	elif [[ $remote_host = lcxe6 ]]
1338	then
1339
1340	ssh ${remote_username}@${remote_addres} "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
1341
1342	else
1343
1344	print "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
1345
1346	fi
1347
1348	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
1349
1350	rm -rf ${remote_host}_last_make_protokoll
1351
1352	# make on local host
1353	else
1354
1355	# workaround for lcxe6
1356	if [[ $remote_host = lcxe6 ]]
1357	then
1358
1359	eval $init_cmds
1360
1361	fi
1362
1363	# first load modules, if given
1364	if [[ "$modules" != "" ]]
1365	then
1366	if [[ $remote_host = lctit ]]
1367	then
1368	. $modules
1369	else
1370	module load ${modules}
1371	fi
1372	fi
1373
1374
1375	if [[ $compile_utility_programs = false ]]
1376	then
1377
1378	# DEPOSITORY VERZEICHNIS ERZEUGEN, FALLS NOCH NICHT VORHANDEN
1379	eval remote_md=$remote_md
1380	if [[ ! -d $remote_md ]]
1381	then
1382	if mkdir $remote_md
1383	then
1384	printf "\n\n *** directory for make depository:"
1385	printf "\n $remote_md"
1386	printf "\n was created\n"
1387	else
1388	printf "\n +++ directory for make depository:"
1389	printf "\n $remote_md"
1390	printf "\n cannot be created"
1391	locat=local_depository_path; exit
1392	fi
1393	fi
1394
1395	# QUELLTEXT-DATEIEN AUS REPOSITORY INS DEPOSITORY KOPIEREN
1396	echo " "
1397	echo " *** updating sources in $remote_md"
1398	cd $remote_md
1399	cp $local_source_path/${mainprog}_sources.tar .
1400	tar xf ${mainprog}_sources.tar
1401
1402	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
1403	echo " "
1404	echo " *** execute \"make\" on local host"
1405
1406	make $make_options PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
1407
1408	if [[ $? != 0 ]]
1409	then
1410	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1411	if [[ $silent = false ]]
1412	then
1413	answer=dummy
1414	printf "\n"
1415	while [[ "$answer" != c && "$answer" != k ]]
1416	do
1417	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
1418	read answer
1419	if [[ "$answer" = l ]]
1420	then
1421	more ${remote_host}_last_make_protokoll
1422	fi
1423	done
1424	if [[ $answer = k ]]
1425	then
1426	locat=user_abort; exit
1427	fi
1428	fi
1429	fi
1430
1431
1432	# TAR NEW VERSION ON LOCAL HOST
1433	printf "\n *** tar update on local host ..."
1434	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
1435
1436
1437	# COMPILE THE UTILITY PROGRAMS
1438	elif [[ $compile_utility_programs = true ]]
1439	then
1440	printf "\n\n"
1441	echo " *** compiling the utility programs ..."
1442	cd ${local_source_path}/../UTIL
1443
1444	# TOUCH FILES IN ORDER TO FORCE COMPILATION FOR EVERY BLOCK
1445	touch *.f90
1446	make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
1447
1448	# CHECK IF QMAKE IS AVAILABLE AND COMPILE MRUNGUI
1449	if [[ $util_compiled_localhost == false ]]
1450	then
1451	printf "\n\n"
1452	echo " *** compiling the mrun GUI"
1453	if which qmake >/dev/null; then
1454	cd mrungui
1455	touch *
1456	qmake
1457	make
1458	make clean
1459	rm Makefile
1460	cd ..
1461	else
1462	echo " +++ no qmake found. The (optional) GUI will not be compiled."
1463	fi
1464
1465	# COMPILE CHECK_NAMELIST_FILES (ONLY FOR ONE BRANCH on LOCALHOST NEEDED)
1466
1467	printf "\n\n"
1468	echo " *** compiling check_namelist_files ..."
1469
1470	# GET CHECK OPTIONS
1471	line=""
1472	found=false
1473	grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
1474	while read line1
1475	do
1476
1477	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
1478	then
1479	line="$line1"
1480	fi
1481
1482	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
1483	then
1484	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING UND ALLE -D ENTFERNEN
1485	line="$line "
1486	copts_check=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g' \| sed 's/-D[^ ]* //g' \| sed 's/ -D.*//g'`
1487	found=true
1488	fi
1489
1490	done < $tmp_mbuild
1491	copts_check="$copts_check -D__check -D__parallel"
1492
1493	check_depository_path=${local_source_path}/../UTIL
1494	cd $check_depository_path
1495	mkdir check_tmp
1496	cp ${local_source_path}/${mainprog}_sources_check.tar ./check_tmp
1497	cd check_tmp
1498	tar -xf ${mainprog}_sources_check.tar
1499	rm -rf ${mainprog}_sources_check.tar
1500
1501	make -f Makefile_check $make_options F90=$compiler_name_ser COPT="$copts_check" F90FLAGS="$compiler_options"
1502	tar -cf check_namelist_files.tar Makefile_check check_namelist_files.x .f90 .o *.mod
1503	mv check_namelist_files.tar $check_depository_path
1504	mv check_namelist_files.x $PALM_BIN
1505	cd $check_depository_path
1506	rm -rf check_tmp
1507	util_compiled_localhost=true
1508	else
1509	cd $check_depository_path
1510	printf "\n\n"
1511	echo " *** skipped compilation of mrun GUI."
1512	printf "\n\n"
1513	echo " *** skipped compilation of check_namelist_files."
1514	fi
1515
1516	fi
1517	fi
1518	done
1519
1520
1521	if [[ $host_found = false ]]
1522	then
1523	if [[ $host = all ]]
1524	then
1525	printf "\n +++ no hosts found in configuration file"
1526	else
1527	printf "\n +++ host \"$host\" not found in configuration file"
1528	fi
1529	locat=config_file; exit
1530	fi
1531
1532	if [[ "$block_conditions" != none && $block_conditions_found = false ]]
1533	then
1534	printf "\n +++ block conditions \"$block_conditions\" not found for host \"$host\""
1535	fi
1536
1537
1538	# FINAL WORK
1539	rm -f hosts_found_in_config_file
1540	rm -f ${local_source_path}/${mainprog}_sources_check.tar
1541

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |