Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 936

Last change on this file since 936 was 936, checked in by raasch, 12 years ago
new option -K for mbuild
Property svn:keywords set to `Id Rev`
File size: 54.2 KB

Rev	Line
[1]	1	#!/bin/ksh
[503]	2	# mbuild - script for compiling the PALM code and its utility programs
[169]	3	# $Id: mbuild 936 2012-06-25 13:15:54Z raasch $
[1]	4
[503]	5	# Procedure to compile code on local and remote hosts using the
	6	# make-mechanism. The source code must be provided on the local host.
[1]	7
[503]	8	# Last changes:
	9	# 06/05/02 - Siggi - start development
	10	# 12/06/02 - Siggi - first version finished
	11	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) included
	12	# 19/12/02 - Siggi - ibmb included
[1]	13	# 05/02/03 - Siggi - hostname nobela included
	14	# 04/03/03 - Siggi - host nech included
	15	# 06/03/03 - Siggi - make_call_string is echoed without '' to
	16	# file LAST_MAKE_CALL (otherwise error on NEC, because
	17	# '' are part of compiler options
	18	# 16/03/03 - Siggi - Two underscores are placed in front of every define
	19	# string, in case that palm.f90 version contains
	20	# such strings
	21	# 16/04/03 - Siggi - First extensions for linux machines
	22	# 24/06/03 - Siggi - host orkan included
	23	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
	24	# 24/07/03 - Siggi - host maestro admitted
	25	# 06/08/03 - Siggi - host gregale admitted
	26	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
	27	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
	28	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
	29	# (-D$OMP=OMP) in order to avoid problems with
	30	# OMP_NUM_THREADS
	31	# 09/01/04 - Siggi - action above cancelled
	32	# 28/01/04 - Siggi - action above re-cancelled
	33	# 08/03/04 - Siggi - host scirocco admitted
	34	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
	35	# the respective .f90 file is not listed in the makefile
	36	# and deletion is demanded by the user
	37	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
	38	# due to error in ssh installation (otherwise a prompt
	39	# for the password appears)
	40	# 23/07/04 - Siggi - changes due to the new berni configuration
	41	# (federation switch)
	42	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
	43	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
	44	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
	45	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
	46	# 24/04/05 - Siggi - netcdf support on lcmuk
	47	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
	48	# 12/05/05 - Siggi - netcdf support on ibm
	49	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
	50	# 18/05/05 - Siggi - netcdf support on nec
	51	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
	52	# 23/05/05 - Siggi - netcdf support on ibms
	53	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
	54	# 30/06/05 - Siggi - netcdf support on bora
	55	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
	56	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
	57	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
	58	# host gfdl5 (ibmy) admitted
	59	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
	60	# 20/01/06 - Siggi - cpp directive for ibmy
	61	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
	62	# 10/02/06 - Siggi - modifications for scp on decalpha
	63	# 13/04/06 - Siggi - ostria admitted
	64	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
	65	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
	66	# 29/05/05 - Siggi - atmos (lcide) admitted
	67	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
	68	# 24/11/06 - Siggi - breva and levanto admitted
	69	# 07/02/07 - Siggi - adapted for RIAM (neck)
[5]	70	# 10/02/07 - Siggi - all hpmuk-related code removed
[40]	71	# 02/03/07 - Siggi - compilation of utility programs and transfer of
[27]	72	# scripts to remote hosts added (option -u)
[66]	73	# 14/03/07 - Siggi - fimm admitted, revision number added to terminal
	74	# output
[69]	75	# 16/03/07 - Siggi - adjustments (netcdf) for lctit
	76	# adjustments for running under pdksh, local ip-addres
	77	# is not determined any more
[82]	78	# 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
	79	# from configuration file
	80	# host identifier (local_host) is read from config file
[116]	81	# 10/10/07 - Siggi - bugfix: handling of comment lines
[181]	82	# 18/07/08 - Siggi - adapted for lcsgih
	83	# 21/07/08 - Siggi - mainprog (executable) is added to the tar-file
	84	# ({mainprog}_current_version)
[206]	85	# 02/10/08 - Siggi - adapted for lcxt4
[215]	86	# 14/11/08 - Siggi - update mechanism completely revised: source tarfile
	87	# remains in source directory, one depository per block
[266]	88	# (given in the config-file) is created, allways all
	89	# files from the source directory are copied to the
	90	# respective depository, no additional file checks are
	91	# done any more (version 2.1)
[224]	92	# 13/01/09 - Marcus- re-enable compilation more than once on lcmuk (as on
	93	# other machines)
[266]	94	# 21/03/09 - Siggi - -u copies also copies process_dvr_output and
	95	# .dvrserver.config
[305]	96	# 21/04/09 - Siggi - adjustments for new IBM at DKRZ, which is now ibmh
[367]	97	# 25/08/09 - BjornM- adapted for lck
[407]	98	# 01/12/09 - BjornM- re-adjustments for lcxt4
[437]	99	# 01/02/10 - Siggi - adjustments for lcxt5m
[475]	100	# 03/02/10 - Siggi - make options (mopts) to be set by configuration file
	101	# implemented, remoted mode option -r completely
	102	# removed, t3e related parts removed
[492]	103	# 26/02/10 - BjornM- re-adjustments for lcxt4 (new modules)
[493]	104	# 01/03/10 - Siggi - mpilib replaced by modules: explicit module settings
	105	# removed; modules should now be given in the
	106	# configuration file
[503]	107	# 02/03/10 - Siggi - utility programs are created separately for each
	108	# block in the configuration file,
	109	# parallel make for utility programs
[508]	110	# 12/03/10 - Siggi - bugfix: remode_md was given a wrong value
[544]	111	# 16/08/10 - BjornM- bugfix: call of modules on local host, new workaround
	112	# for lcxt4
[555]	113	# 07/09/10 - Siggi - bugfix for wrong netcdf/3.6.3 module on lcsgi
[622]	114	# 08/12/10 - Siggi - initialization of the module command changed for
	115	# SGI-ICE/lcsgi
	116	# adjustments for Kyushu Univ. (lcrte, ibmku)
[635]	117	# 14/12/10 - Siggi - adjustments for new Tsubame system at Tokyo
	118	# institute of technology (lctit)
[693]	119	# 04/03/11 - BjornM- re-adjustments for lcxt4
	120	# 06/03/11 - Siggi - adjustments for ibmkisti
[717]	121	# 03/04/11 - Micha - added lckordi
[740]	122	# 17/08/11 - Siggi - HLRN access via hicegate0 (130.75.4.101)
[784]	123	# 27/11/11 - Siggi - Bugfix for make options setting (-j)
[793]	124	# 12/12/11 - BjornM- added mrun GUI to ulitity programs
[807]	125	# 25/01/12 - BjornM- compilation of check_namelist_files (namelist file
	126	# check program) has been added to the utility branch),
	127	# modfified the compilation of mrungui
[811]	128	# 31/01/12 - BjornM- bugfix for compilation of utility programs on
	129	# multiple localhost branches
[818]	130	# 08/03/12 - BjornM- bugfix: cpp directive for namelist check program
	131	# corrected
[935]	132	# 02/05/12 - Bjoern- lcxt4 is now lcxe6, adjustments for lcxe6,
	133	# bugfixes for the parameter file check, initial
	134	# commands on ssh calls sourced out to .mrun.config
	135	# 05/06/12 - Bjoern- bugfixes for execution of login_init_cmd
	136	# 18/06/12 - Siggi - option -v (silent mode) added
[936]	137	# 25/06/12 - Siggi - option -K (block conditions) added
[1]	138
	139
[503]	140	# VARIABLE DECLARATIONS + DEFAULT VALUES
[936]	141	block_conditions=none
	142	block_conditions_found=false
[22]	143	compile_utility_programs=false
[1]	144	config_file=.mrun.config
[67]	145	fimm=false
[1]	146	host=all
	147	host_found=false
	148	locat=normal
	149	makefile=""
[493]	150	module_calls=""
[811]	151	util_compiled_localhost=false
[1]	152	scirocco=false
	153	silent=false
	154	suf=f90
	155	update=false
[83]	156	working_directory=`pwd`
[1]	157
	158	typeset -i ih ihost=0
	159
[66]	160	typeset -R30 calltime
[1]	161	typeset -L20 column1
	162	typeset -L50 column2
	163	typeset -L70 column3
[215]	164	typeset -L40 version="MBUILD 2.1 Rev$Rev: 936 $"
[1]	165
[503]	166	# ERROR HANDLING
	167	# IN CASE OF EXIT:
[83]	168	trap 'rm -rf $working_directory/tmp_mbuild
[69]	169	if [[ $locat != normal ]]
[1]	170	then
	171	printf "\n\n +++ mbuild killed \n\n"
	172	else
	173	printf "\n\n *** mbuild finished \n\n"
	174	fi' exit
	175
	176
[503]	177	# IN CASE OF TERMINAL-BREAK:
[83]	178	trap 'rm -rf $working_directory/tmp_mbuild
[69]	179	printf "\n\n +++ mbuild killed by \"^C\" \n\n"
[1]	180	exit
	181	' 2
	182
	183
[215]	184	tmp_mbuild=${working_directory}/tmp_mbuild
[1]	185
[503]	186	# READ SHELLSCRIPT-OPTIONS
[936]	187	while getopts :c:h:K:m:s:uv option
[1]	188	do
	189	case $option in
	190	(c) config_file=$OPTARG;;
	191	(h) host=$OPTARG;;
[936]	192	(K) block_conditions=$OPTARG;;
[1]	193	(m) makefile=$OPTARG;;
	194	(s) suf=$OPTARG;;
[22]	195	(u) compile_utility_programs=true;;
[935]	196	(v) silent=true;;
[1]	197	(\?) printf "\n +++ unknown option $OPTARG \n";
	198	locat=parameter; exit;;
	199	esac
	200	done
	201
	202
	203
[503]	204	# CHECK, IF CONFIGURATION-FILE EXISTS
[82]	205	if [[ ! -f $config_file ]]
	206	then
	207	printf "\n +++ configuration file: "
	208	printf "\n $config_file"
	209	printf "\n does not exist"
	210	locat=configuration; exit
	211	fi
	212
	213
	214
[503]	215	# DETERMINE THE LOCAL HOST
[1]	216	local_host_real_name=$(hostname)
[69]	217	# local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
	218
[1]	219
[82]	220
[503]	221	# DETERMINE HOST-IDENTIFIER (local_host) FROM THE CONFIG-FILE
[82]	222	line=""
[215]	223	grep "%host_identifier" $config_file > $tmp_mbuild
[82]	224	while read line
	225	do
[116]	226	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
[82]	227	then
	228	HOSTNAME=`echo $line \| cut -d" " -s -f2`
	229	host_identifier=`echo $line \| cut -d" " -s -f3`
[83]	230	if [[ $local_host_real_name = $HOSTNAME ]]
[82]	231	then
	232	local_host=$host_identifier
	233	break
	234	fi
	235	fi
[215]	236	done < $tmp_mbuild
[82]	237
	238	if [[ "$local_host" = "" ]]
	239	then
	240	printf "\n +++ no host identifier found in configuration file \"$config_file\""
	241	printf "\n for local host \"$local_host_real_name\"."
	242	printf "\n Please add line"
	243	printf "\n \"\%host_identifier $local_host_real_name <identifier>\""
	244	printf "\n to the configuration file."
	245	locat=local_host; exit
	246	fi
	247
	248
	249
[1]	250	[[ $local_host_real_name = scirocco ]] && scirocco=true
[67]	251	[[ $local_host_real_name = fimm.bccs.uib.no ]] && fimm=true
[1]	252
	253
	254
	255	if [[ $local_host != ibms ]]
	256	then
	257	config_file=$PWD/$config_file
	258	else
	259	config_file=`pwd`/$config_file
	260	fi
	261
	262
[936]	263	# determine the block conditions
	264	if [[ $block_conditions != none ]]
	265	then
	266	block_condition1=`echo $block_conditions \| cut -d" " -f1`
	267	block_condition2=`echo $block_conditions \| cut -d" " -f2`
	268	if [[ "$block_condition2" = "$block_condition1" ]]
	269	then
	270	block_condition2=""
	271	fi
	272	echo "*** block conditions = 1:\"$block_condition1\" 2:\"$block_condition2\""
	273	fi
	274
[1]	275
[503]	276	# DETERMINE USER NAME ON LOCAL HOST FROM THE CONFIG-FILE
[1]	277	line=""
[215]	278	grep " $local_host" $config_file \| grep "%remote_username" > $tmp_mbuild
[69]	279	while read line
[1]	280	do
[116]	281	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
[1]	282	then
	283	local_username=`echo $line \| cut -d" " -s -f2`
	284	fi
[215]	285	done < $tmp_mbuild
[1]	286
[82]	287
[1]	288	if [[ "$local_username" = "" ]]
	289	then
	290	printf "\n +++ no user name found in configuration file"
	291	printf "\n for local host \"$local_host\" "
	292	locat=config_file; exit
	293	fi
	294
	295
[503]	296	# DETERMINE LOCAL SOURCE-CODE PATH.
	297	# FIRST CHECK, IF A GLOBAL SOURCE-CODE PATH HAS BEEN DECLARED FOR ALL HOSTS.
	298	# THEREFORE, FIRST SET ALL GLOBAL VARIABLES DECLARED IN THE CONFIG-FILE,
	299	# BECAUSE THEY MAY BE USED AS PART OF THE PATH NAME.
[5]	300	line=""
[215]	301	grep "%" $config_file > $tmp_mbuild
[69]	302	while read line
[5]	303	do
[116]	304	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" && $(echo $line \| cut -c1) != "#" ]]
[1]	305	then
[5]	306	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
	307	value=`echo $line \| cut -d" " -s -f2`
[8]	308	eval export $var=\$value
[1]	309	fi
[215]	310	done < $tmp_mbuild
[1]	311
[503]	312	# NOW CHECK, IF A GLOBAL SOURCE-CODE-PATH HAS BEEN DECLARED
[1]	313	line=""
[215]	314	grep "%source_path" $config_file > $tmp_mbuild
[69]	315	while read line
[1]	316	do
	317	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	318	then
	319	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
	320	then
	321	global_source_path=`echo $line \| cut -d" " -s -f2`
	322	fi
	323	fi
[215]	324	done < $tmp_mbuild
[1]	325
	326	line=""
[215]	327	grep " $local_host" $config_file \| grep "%source_path" > $tmp_mbuild
[69]	328	while read line
[1]	329	do
	330	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	331	then
	332	local_source_path=`echo $line \| cut -d" " -s -f2`
	333	fi
[215]	334	done < $tmp_mbuild
[1]	335
	336	if [[ "$local_source_path" = "" ]]
	337	then
	338	if [[ "$global_source_path" != "" ]]
	339	then
	340	local_source_path=$global_source_path
	341	else
	342	printf "\n +++ no source path found in configuration file"
	343	printf "\n for local host \"$local_host\" "
	344	printf "\n please set \"\%source_path\" in configuration file"
	345	locat=config_file; exit
	346	fi
	347	fi
	348	eval local_source_path=$local_source_path
[8]	349	eval local_source_path=$local_source_path
[1]	350
	351
[215]	352
[503]	353	# DETERMINE GLOBAL DEPOSITORY-PATH
[1]	354	line=""
[215]	355	grep "%depository_path" $config_file > $tmp_mbuild
[69]	356	while read line
[1]	357	do
	358	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	359	then
	360	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
	361	then
	362	global_depository_path=`echo $line \| cut -d" " -s -f2`
	363	fi
	364	fi
[215]	365	done < $tmp_mbuild
[1]	366
[807]	367	if [[ $found = false ]]
	368	then
	369	printf "\n +++ no \%depository_path found in"
	370	printf "\n $config_file"
	371	locat=depository_path; exit
	372	fi
[1]	373
[503]	374	# CHECK, IF A MAIN PROGRAM HAS BEEN DEFINED IN THE CONFIG-FILE
[5]	375	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
	376	then
	377	printf "\n +++ no main program or more than one main program defined"
	378	printf "\n in configuration file"
	379	locat=configuration; exit
	380	else
	381	line=`grep "%mainprog" $config_file`
	382	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
	383	then
	384	printf "\n +++ no main program defined in configuration file"
	385	locat=configuration; exit
	386	fi
	387	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
	388	fi
	389
	390
	391
[503]	392	# CHECK IF MAKEFILE EXITS
[1]	393	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
	394	if [[ ! -f $makefile ]]
	395	then
	396	printf "\n +++ makefile: "
	397	printf "\n $makefile"
	398	printf "\n does not exist"
	399	locat=makefile; exit
	400	fi
	401
	402
[503]	403	# HEADER-OUTPUT (PART1: MESSAGES CONCERNING THE LOCAL HOST)
[1]	404	calltime=$(date)
	405	printf "\n"
	406	printf "#------------------------------------------------------------------------# \n"
	407	printf "\| $version$calltime \| \n"
	408	printf "\| \| \n"
	409	column1="called on:"; column2=$local_host_real_name
	410	printf "\| $column1$column2 \| \n"
	411	column1="local username:"; column2=$local_username
	412	printf "\| $column1$column2 \| \n"
	413	column1="local IP-addres:"; column2=$local_addres
	414	printf "\| $column1$column2 \| \n"
	415	column1="config file:"; column2=$config_file
	416	printf "\| $column1$column2 \| \n"
	417	column1="makefile:"; column2=$makefile
	418	printf "\| $column1$column2 \| \n"
	419	column1="local source path:"; column2=$local_source_path
	420	printf "\| $column1$column2 \| \n"
	421	printf "#------------------------------------------------------------------------# \n"
	422
	423	# printf "\| \| \n"
	424
	425
[40]	426	if [[ $compile_utility_programs = false ]]
	427	then
[1]	428
[503]	429	# IN ANY CASE, GIVE ALL FILES WRITE-PERMIT, IN ORDER TO AVOID PROBLEMS
	430	# WITH OVERWRITING FILES ON THE REMOTE HOST
[215]	431	cd $local_source_path
	432	printf "\n\n *** tar of makefile and source files in $local_source_path"
[40]	433	tar -cf ${mainprog}_sources.tar Makefile *.$suf
	434	printf "\n"
[1]	435
[807]	436	else
	437	cd $local_source_path
	438	printf "\n\n *** tar of makefile and source files in $local_source_path"
	439
	440	cat Makefile_check\|while read line
	441	do
	442	line=$(echo $line\|grep RCS)
	443	if [[ $line == "RCS" ]]
	444	then
	445	line=$(echo $line\|sed 's/RCS = //g')
	446	break
	447	fi
	448	done
	449
	450	tar -cf ${mainprog}_sources_check.tar Makefile_check $line
	451	printf "\n"
[40]	452	fi
[1]	453
	454
[40]	455
[503]	456	# GET CONFIRMATION TO CONTINUE
[1]	457	if [[ $host = all ]]
	458	then
	459	printf "\n *** updates will be made for ALL hosts found in"
	460	printf "\n the configuration file"
	461	else
	462	printf "\n *** update will be made for host \"$host\" "
	463	fi
	464
	465	if [[ $silent = false ]]
	466	then
	467	answer=dummy
	468	printf "\n\n"
	469	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
	470	do
	471	printf " >>> continue (y/n) ? "
	472	read answer
	473	done
	474	if [[ $answer = n \|\| $answer = N ]]
	475	then
	476	locat=user_abort; exit
	477	fi
	478	fi
	479
	480
	481
	482
	483	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
	484	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
	485	printf "\n *** scanning configuration file for host(s) ..."
	486
[215]	487	grep %fopts $config_file > $tmp_mbuild
[69]	488	while read line
[1]	489	do
	490	# KOMMENTARZEILEN UEBERSPRINGEN
	491	[[ $(echo $line \| cut -c1) = "#" ]] && continue
	492	(( ihost = ihost + 1 ))
	493	hostline[$ihost]="$line"
[215]	494	done < $tmp_mbuild
[1]	495
	496
	497	while (( ih < ihost ))
	498	do
	499
	500	(( ih = ih + 1 ))
	501
[936]	502	# determine remote host and conditions for the respective block
	503	# continue, only if this host has been chosen via -h option and if
	504	# conditions have been chosen via -K option
[1]	505	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
	506	remote_host=`echo $remote_host_string \| cut -d" " -f1`
	507	if [[ $host != all ]]
	508	then
	509	[[ $remote_host != $host ]] && continue
	510	fi
	511	host_found=true
	512	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
	513	if [[ $condition1 = $remote_host ]]
	514	then
	515	condition1=""
	516	else
	517	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
	518	fi
	519
[936]	520	if [[ $block_conditions != none ]]
	521	then
	522	if [[ "$condition1" != "$block_condition1" \|\| "$condition2" != "$block_condition2" ]]
	523	then
	524	continue
	525	fi
	526	block_conditions_found=true
	527	fi
	528
[493]	529	modules=""
[82]	530	netcdf_inc=""
	531	netcdf_lib=""
[784]	532	make_options=""
[1]	533
	534	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
	535	case $remote_host in
[717]	536	(lckordi) remote_adress=210.219.61.8;;
[116]	537	(lcmuk) remote_addres=130.75.105.2;;
[622]	538	(lcrte) remote_addres=133.5.185.60;;
[181]	539	(lcsgib) remote_addres=130.73.232.102;;
[740]	540	(lcsgih) remote_addres=130.75.4.101;;
[367]	541	(lck) remote_addres=165.132.26.61;;
[635]	542	(lctit) remote_addres=10.1.6.170;;
[892]	543	(lcxe6) remote_addres=129.177.20.113;;
[437]	544	(lcxt5m) remote_addres=193.166.211.144;;
[83]	545	(decalpha) remote_addres=165.132.26.56;;
[305]	546	(ibmh) remote_addres=136.172.40.15;;
[693]	547	(ibmkisti) remote_addres=150.183.146.24;;
[622]	548	(ibmku) remote_addres=133.5.4.129;;
[83]	549	(ibms) remote_addres=150.183.5.101;;
	550	(ibmy) remote_addres=165.132.26.58;;
	551	(nech) remote_addres=136.172.44.192;;
	552	(neck) remote_addres=133.5.178.11;;
	553	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
	554	(*) if [[ $local_host != $remote_host ]]
[1]	555	then
[83]	556	printf "\n +++ remote host \"$remote_host\" unknown";
[503]	557	printf "\n please inform PALM group support!"
[1]	558	fi;;
	559	esac
	560
	561
	562	# REMOTE-USERNAMEN ERMITTELN
	563	line=""
[116]	564	found=false
[215]	565	grep "$remote_host_string" $config_file \| grep "%remote_username" > $tmp_mbuild
[69]	566	while read line1
[1]	567	do
[116]	568
[1]	569	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	570	then
	571	line="$line1"
	572	fi
[116]	573
	574	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	575	then
	576	remote_username=`echo $line \| cut -d" " -s -f2`
	577	found=true
	578	fi
	579
[215]	580	done < $tmp_mbuild
[1]	581
[116]	582	if [[ $found = false ]]
[1]	583	then
	584	printf "\n +++ no remote username found in configuration file"
	585	printf "\n for \"$remote_host_string\" "
	586	locat=config_file; exit
	587	fi
	588
	589
	590	# REMOTE-QUELLTEXTPFAD ERMITTELN
	591	line=""
[54]	592	remote_source_path=""
[215]	593	grep "$remote_host_string" $config_file \| grep "%source_path" > $tmp_mbuild
[69]	594	while read line1
[1]	595	do
[116]	596
[1]	597	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	598	then
	599	line="$line1"
	600	fi
[116]	601
	602	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	603	then
	604	remote_source_path=`echo $line \| cut -d" " -s -f2`
	605	fi
	606
[215]	607	done < $tmp_mbuild
[1]	608
	609	if [[ "$remote_source_path" = "" ]]
	610	then
	611	if [[ "$global_source_path" != "" ]]
	612	then
	613	remote_source_path=$global_source_path
	614	else
	615	printf "\n +++ no source path found in configuration file"
	616	printf "\n for \"$remote_host_string\" "
	617	locat=config_file; exit
	618	fi
	619	fi
	620
[22]	621	remote_ud=${remote_source_path}/../UTIL
[24]	622	remote_ud=$(eval echo $remote_ud)
[1]	623
[54]	624
[1]	625	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
[54]	626	remote_md=""
[1]	627	line=""
[215]	628	grep "$remote_host_string" $config_file \| grep "%depository_path" > $tmp_mbuild
[69]	629	while read line1
[1]	630	do
[116]	631
[1]	632	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	633	then
	634	line="$line1"
	635	fi
[116]	636
	637	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	638	then
	639	remote_md=`echo $line \| cut -d" " -s -f2`
	640	fi
	641
[215]	642	done < $tmp_mbuild
[1]	643
	644	if [[ "$remote_md" = "" ]]
	645	then
	646	if [[ "$global_depository_path" != "" ]]
	647	then
	648	remote_md=$global_depository_path
	649	else
	650	printf "\n +++ no depository path found in configuration file"
	651	printf "\n for \"$remote_host_string\" "
	652	printf "\n please set \"\%depository_path\" in configuration file"
	653	locat=config_file; exit
	654	fi
	655	fi
	656
[8]	657	remote_md=$(eval echo $remote_md)
[503]	658	block=""
	659	[[ "$condition1" != "" ]] && block=_$condition1
	660	[[ "$condition2" != "" ]] && block=${block}_$condition2
[508]	661	remote_md=${remote_md}$block
[1]	662
[8]	663
[1]	664	# COMPILERNAMEN ERMITTELN
	665	line=""
[116]	666	found=false
[215]	667	grep "$remote_host_string" $config_file \| grep "%compiler_name " > $tmp_mbuild
[69]	668	while read line1
[1]	669	do
[116]	670
[1]	671	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	672	then
	673	line="$line1"
	674	fi
[116]	675
	676	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	677	then
	678	compiler_name=`echo $line \| cut -d" " -s -f2`
	679	found=true
	680	fi
	681
[215]	682	done < $tmp_mbuild
[1]	683
[116]	684	if [[ $found = false ]]
[1]	685	then
	686	printf "\n +++ no compiler name found in configuration file"
	687	printf "\n for \"$remote_host_string\" "
	688	locat=config_file; exit
	689	fi
	690
	691
[27]	692	# BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
	693	# SERIELLER COMPILERNAME ERMITTELT WERDEN
	694	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
	695	then
	696	line=""
[116]	697	found=false
[215]	698	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" > $tmp_mbuild
[69]	699	while read line1
[27]	700	do
[116]	701
[27]	702	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	703	then
	704	line="$line1"
	705	fi
[116]	706
	707	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	708	then
	709	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
	710	found=true
	711	fi
	712
[215]	713	done < $tmp_mbuild
[1]	714
[116]	715	if [[ $found = false ]]
[27]	716	then
[28]	717	printf "\n +++ no serial compiler name found in configuration file"
[27]	718	printf "\n for \"$remote_host_string\" "
	719	locat=config_file; exit
	720	fi
	721	else
	722	compiler_name_ser=$compiler_name
	723	fi
	724
	725
	726
[82]	727	# PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
	728	line=""
[116]	729	found=false
[215]	730	grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
[82]	731	while read line1
	732	do
[116]	733
[82]	734	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	735	then
	736	line="$line1"
	737	fi
[116]	738
	739	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	740	then
	741	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	742	cpp_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	743	found=true
	744	fi
	745
[215]	746	done < $tmp_mbuild
[116]	747
	748	if [[ $found = false ]]
[82]	749	then
	750	printf "\n +++ no preprocessor options found in configuration file"
	751	printf "\n for \"$remote_host_string\" "
	752	locat=config_file; exit
	753	fi
	754
[116]	755
[82]	756	# RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
	757	for string in $remote_host_string
	758	do
	759	if [[ $(echo $remote_host \| cut -c1-2) = lc && $(echo $string \| cut -c1-2) = lc ]]
	760	then
	761	cpp_options="$cpp_options -D__lc "
[83]	762	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $(echo $string \| cut -c1-3) = ibm ]]
	763	then
	764	cpp_options="${cpp_options},-D__ibm"
	765	elif [[ $(echo $remote_host \| cut -c1-3) = nec && $(echo $string \| cut -c1-3) = nec ]]
	766	then
	767	cpp_options="${cpp_options} -D__nec"
[82]	768	else
[83]	769	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
	770	then
	771	cpp_options="${cpp_options},-D__$string"
	772	else
	773	cpp_options="$cpp_options -D__$string "
	774	fi
[82]	775	fi
	776	done
	777
	778
	779
	780	# NETCDF-OPTIONEN ERMITTELN
	781	line=""
[215]	782	grep "$remote_host_string" $config_file \| grep "%netcdf_inc" > $tmp_mbuild
[82]	783	while read line1
	784	do
[116]	785
[82]	786	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	787	then
	788	line="$line1"
	789	fi
[116]	790
	791	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	792	then
	793	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	794	netcdf_inc=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	795	fi
	796
[215]	797	done < $tmp_mbuild
[82]	798
	799	line=""
[215]	800	grep "$remote_host_string" $config_file \| grep "%netcdf_lib" > $tmp_mbuild
[82]	801	while read line1
	802	do
[116]	803
[82]	804	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	805	then
	806	line="$line1"
	807	fi
[116]	808
	809	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	810	then
	811	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	812	netcdf_lib=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	813	fi
	814
[215]	815	done < $tmp_mbuild
[82]	816
	817
	818
[475]	819	# get make options
	820	line=""
	821	found=false
	822	grep "$remote_host_string" $config_file \| grep "%mopts" > $tmp_mbuild
	823	while read line1
	824	do
	825
	826	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	827	then
	828	line="$line1"
	829	fi
	830
	831	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	832	then
	833	# remove colons from directive string
	834	make_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	835
	836	fi
	837
	838	done < $tmp_mbuild
	839
	840
	841
[1]	842	# COMPILEROPTIONEN ERMITTELN
	843	line=""
[116]	844	found=false
[215]	845	grep "$remote_host_string" $config_file \| grep "%fopts" > $tmp_mbuild
[69]	846	while read line1
[1]	847	do
[116]	848
[1]	849	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	850	then
	851	line="$line1"
	852	fi
[116]	853
	854	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	855	then
	856	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	857	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	858	found=true
	859
	860	# NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
	861	compiler_options="$compiler_options $netcdf_inc"
	862	fi
	863
[215]	864	done < $tmp_mbuild
[116]	865
	866	if [[ $found = false ]]
[1]	867	then
	868	printf "\n +++ no compiler options found in configuration file"
	869	printf "\n for \"$remote_host_string\" "
	870	locat=config_file; exit
	871	fi
[82]	872
[1]	873
[892]	874	# get login init commands, "::" is replacing a space
	875	line=""
	876	grep "$remote_host_string" $config_file \| grep "%login_init_cmd" > $tmp_mbuild
	877	while read line1
	878	do
[1]	879
[892]	880	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	881	then
	882	line="$line1"
	883	fi
	884
	885	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	886	then
	887	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	888	init_cmds=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	889	fi
	890	init_cmds="${init_cmds};"
	891	done < $tmp_mbuild
	892
	893
[503]	894	# get modules to be loaded
[221]	895	line=""
[493]	896	grep "$remote_host_string" $config_file \| grep "%modules" > $tmp_mbuild
[221]	897	while read line1
	898	do
	899
	900	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	901	then
	902	line="$line1"
	903	fi
	904
	905	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	906	then
	907	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
[493]	908	modules=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
[221]	909	fi
	910
	911	done < $tmp_mbuild
	912
	913
[1]	914	# LADER-OPTIONEN ERMITTELN
	915	line=""
[116]	916	found=false
[215]	917	grep "$remote_host_string" $config_file \| grep "%lopts" > $tmp_mbuild
[69]	918	while read line1
[1]	919	do
[116]	920
[1]	921	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	922	then
	923	line="$line1"
	924	fi
[116]	925
	926	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	927	then
	928	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	929	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	930	found=true
	931
	932	# NETCDF-LIBRARY HINZUFUEGEN
	933	loader_options="$loader_options $netcdf_lib"
	934	fi
	935
[215]	936	done < $tmp_mbuild
[1]	937
[116]	938	if [[ $found = false ]]
[1]	939	then
	940	printf "\n +++ no loader options found in configuration file"
	941	printf "\n for \"$remote_host_string\" "
	942	locat=config_file; exit
	943	fi
[82]	944
[1]	945
	946	printf "\n\n#------------------------------------------------------------------------# \n"
	947	if [[ $remote_host = $local_host ]]
	948	then
	949	column1="remote_host:"; column2="$remote_host (= local host!)"
	950	else
	951	column1="remote_host:"; column2=$remote_host
	952	fi
	953	printf "\| $column1$column2 \| \n"
	954	printf "\| \| \n"
	955	column1="conditions:"; column2="$condition1 $condition2"
	956	printf "\| $column1$column2 \| \n"
	957	column1="make depository:"; column2=$remote_md
	958	printf "\| $column1$column2 \| \n"
[215]	959	line=$(echo "$remote_md" \| cut -c51-)
	960	while [[ "$line" != "" ]]
	961	do
	962	column1=""
	963	column2=$line
	964	printf "\| $column1$column2 \| \n"
	965	line=$(echo "$line" \| cut -c51-)
	966	done
[25]	967	if [[ $compile_utility_programs = true ]]
	968	then
	969	column1="utility directory:"; column2=$remote_ud
	970	printf "\| $column1$column2 \| \n"
	971	fi
[1]	972	column1="username:"; column2=$remote_username
	973	printf "\| $column1$column2 \| \n"
	974	column1="addres:"; column2=$remote_addres
	975	printf "\| $column1$column2 \| \n"
	976	column1="compiler:"; column2=$compiler_name
	977	printf "\| $column1$column2 \| \n"
[28]	978	if [[ $compile_utility_programs = true ]]
	979	then
	980	column1="serial compiler:"; column2=$compiler_name_ser
	981	printf "\| $column1$column2 \| \n"
	982	fi
[475]	983	if [[ "$make_options" != "" ]]
	984	then
	985	column1="make options:"; column2=$make_options
	986	printf "\| $column1$column2 \| \n"
	987	fi
[1]	988	column1="cpp options:"; column2=$cpp_options
	989	printf "\| $column1$column2 \| \n"
	990	line=$(echo "$cpp_options" \| cut -c51-)
	991	while [[ "$line" != "" ]]
	992	do
	993	column1=""
	994	column2=$line
	995	printf "\| $column1$column2 \| \n"
	996	line=$(echo "$line" \| cut -c51-)
	997	done
	998	column1="compiler options:"; column2=$compiler_options
	999	printf "\| $column1$column2 \| \n"
	1000	line=$(echo "$compiler_options" \| cut -c51-)
	1001	while [[ "$line" != "" ]]
	1002	do
	1003	column1=""
	1004	column2=$line
	1005	printf "\| $column1$column2 \| \n"
	1006	line=$(echo "$line" \| cut -c51-)
	1007	done
	1008	column1="loader options:"; column2=$loader_options
	1009	printf "\| $column1$column2 \| \n"
	1010	line=$(echo "$loader_options" \| cut -c51-)
	1011	while [[ "$line" != "" ]]
	1012	do
	1013	column1=""
	1014	column2=$line
	1015	printf "\| $column1$column2 \| \n"
	1016	line=$(echo "$line" \| cut -c51-)
	1017	done
[493]	1018	if [[ $modules != "" ]]
	1019	then
	1020	column1="modules to be load:"; column2=$modules
	1021	printf "\| $column1$column2 \| \n"
	1022	line=$(echo "$modules" \| cut -c51-)
	1023	while [[ "$line" != "" ]]
	1024	do
	1025	column1=""
	1026	column2=$line
	1027	printf "\| $column1$column2 \| \n"
	1028	line=$(echo "$line" \| cut -c51-)
	1029	done
	1030	fi
[1]	1031	printf "#------------------------------------------------------------------------# \n"
	1032
	1033	if [[ $silent = false ]]
	1034	then
	1035	answer=dummy
	1036	printf "\n\n"
	1037	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
	1038	do
	1039	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
	1040	read answer
	1041	done
	1042	if [[ $answer = a \|\| $answer = A ]]
	1043	then
	1044	locat=user_abort; exit
	1045	fi
	1046	if [[ $answer = c \|\| $answer = C ]]
	1047	then
[503]	1048	silent=true
[1]	1049	fi
	1050	if [[ $answer = s \|\| $answer = S ]]
	1051	then
	1052	continue
	1053	fi
	1054	fi
	1055
	1056
[475]	1057	# make on remote host
	1058	if [[ $remote_host != $local_host ]]
[1]	1059	then
[475]	1060	if [[ $compile_utility_programs = false ]]
[1]	1061	then
	1062
[475]	1063	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	1064	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
	1065	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
	1066	if [[ $remote_host != lctit ]]
	1067	then
	1068	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
	1069	else
	1070	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	1071	# MIT SSH, DESHALB AUFRUF PER PIPE
	1072	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
	1073	fi
	1074	if [[ $local_host = decalpha ]]
	1075	then
	1076	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
	1077	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1078	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1079	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
	1080	/bin/scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
	1081	else
	1082	scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
	1083	fi
[1]	1084
	1085
	1086
[475]	1087	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
	1088	echo " *** untar previous update on remote host, if existing"
	1089	if [[ $remote_host != lctit ]]
	1090	then
	1091	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
	1092	else
	1093	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	1094	# MIT SSH, DESHALB AUFRUF PER PIPE
	1095	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
	1096	fi
[1]	1097
	1098
[475]	1099	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
	1100	echo " *** untar actual sources on remote host"
	1101	if [[ $remote_host != lctit ]]
	1102	then
	1103	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
	1104	else
	1105	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	1106	# MIT SSH, DESHALB AUFRUF PER PIPE
	1107	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
	1108	fi
[1]	1109
	1110
[475]	1111	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1112	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
	1113	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
	1114	# Z.B. DIE PFADE ZUM COMPILER)
	1115	echo " *** execute \"make\" on remote host"
[1]	1116
[493]	1117
	1118	# generate make call with make options
[475]	1119	if [[ $remote_host = nech ]]
	1120	then
	1121	make_call_string="sxmake $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1122	else
	1123	make_call_string="make $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1124	fi
[1]	1125
[493]	1126	# generate command to load modules, if modules are given
	1127	if [[ "$modules" != "" ]]
	1128	then
[678]	1129	if [[ $remote_host = lctit ]]
	1130	then
	1131	module_calls=". $modules"
	1132	else
	1133	module_calls="module load ${modules};"
	1134	fi
[555]	1135
	1136	# bugfix for wrong netcdf module
	1137	if [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
	1138	then
	1139	if [[ $(echo $module_calls \| grep -c netcdf/3.6.3-intel) != 0 ]]
	1140	then
	1141	module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
	1142	fi
	1143	fi
[503]	1144	else
	1145	module_calls=""
[493]	1146	fi
	1147
[693]	1148	if [[ $remote_host = ibmkisti \|\| $remote_host = ibms \|\| $remote_host = ibmy ]]
[475]	1149	then
[1]	1150
[892]	1151	ssh ${remote_username}@${remote_addres} "$init_cmds $module_calls cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1152
[475]	1153	elif [[ $remote_host = ibmh ]]
	1154	then
[1]	1155
[892]	1156	print "$init_cmds $module_calls export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1157
[475]	1158	elif [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
	1159	then
[622]	1160	# print ". /usr/share/modules/init/bash; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[892]	1161	print "$init_cmds $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1162
[475]	1163	elif [[ $remote_host = lctit ]]
	1164	then
[1]	1165
[475]	1166	echo " " > ${remote_host}_last_make_protokoll
	1167	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
	1168	do
	1169	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1170	done
[1]	1171
[892]	1172	elif [[ $remote_host = lcxe6 ]]
[1]	1173	then
	1174
[892]	1175	ssh ${remote_username}@${remote_addres} "$init_cmds $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1176
[475]	1177	else
[1]	1178
[892]	1179	print "$init_cmds $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1180
[475]	1181	fi
[1]	1182
[475]	1183	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
	1184	then
	1185	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
	1186	if [[ $silent = false ]]
[40]	1187	then
[475]	1188	answer=dummy
	1189	printf "\n"
	1190	while [[ "$answer" != c && "$answer" != k ]]
[40]	1191	do
[475]	1192	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
	1193	read answer
	1194	if [[ "$answer" = l ]]
	1195	then
	1196	more ${remote_host}_last_make_protokoll
	1197	fi
[40]	1198	done
[475]	1199	if [[ $answer = k ]]
[40]	1200	then
[475]	1201	locat=user_abort; exit
[1]	1202	fi
	1203	fi
[475]	1204	fi
[1]	1205
	1206
	1207
[475]	1208	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
	1209	printf "\n *** tar update on remote host ..."
	1210	if [[ $remote_host != lctit ]]
	1211	then
	1212	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod"
	1213	else
	1214	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	1215	# MIT SSH, DESHALB AUFRUF PER PIPE
	1216	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
	1217	fi
[1]	1218
	1219
[475]	1220	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
	1221	# printf "\n *** \"make clean\" on remote host ..."
	1222	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
	1223	# printf "\n"
[1]	1224
	1225
[25]	1226
	1227
[475]	1228	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
	1229	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	1230	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
	1231	elif [[ $compile_utility_programs = true ]]
	1232	then
	1233
	1234	printf "\n\n"
	1235	echo " *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
	1236	cd ${local_source_path}/../SCRIPTS
	1237
	1238	if [[ $remote_host != lctit ]]
[22]	1239	then
[475]	1240	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
	1241	else
[503]	1242	# TIT ERLAUBT NUR DIE AUSFUEHRUNG GANZ BESTIMMTER KOMMANDOS
[475]	1243	# MIT SSH, DESHALB AUFRUF PER PIPE
	1244	print "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_addres} 2>&1
	1245	fi
[22]	1246
[475]	1247	# KOPIEREN DER SCRIPTE
	1248	if [[ $local_host = decalpha ]]
	1249	then
[503]	1250	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTAENDIGEN PFADES
[475]	1251	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1252	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1253	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
	1254	/bin/scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
	1255	else
	1256	scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
	1257	fi
[22]	1258
[475]	1259	cd - > /dev/null
	1260	cd ${local_source_path}/../UTIL
[22]	1261
[27]	1262
[475]	1263	# KOPIEREN DER UTILITY-PROGRAMME
	1264	if [[ $local_host = decalpha ]]
	1265	then
	1266	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
	1267	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1268	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1269	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
	1270	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
	1271	else
	1272	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
	1273	fi
[27]	1274
	1275
[22]	1276
[475]	1277	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1278	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
	1279	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
	1280	# Z.B. DIE PFADE ZUM COMPILER)
	1281	echo " *** execute \"make\" on remote host"
[22]	1282
[475]	1283	if [[ $remote_host = nech ]]
	1284	then
[503]	1285	make_call_string="sxmake $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
[475]	1286	else
[503]	1287	make_call_string="make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
[475]	1288	fi
[22]	1289
[493]	1290	# generate command to load modules, if modules are given
	1291	if [[ "$modules" != "" ]]
	1292	then
[678]	1293	if [[ $remote_host = lctit ]]
	1294	then
	1295	module_calls=". $modules"
	1296	else
	1297	module_calls="module load ${modules};"
	1298	fi
[562]	1299
	1300	# bugfix for wrong netcdf module
	1301	if [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
	1302	then
	1303	if [[ $(echo $module_calls \| grep -c netcdf/3.6.3-intel) != 0 ]]
	1304	then
	1305	module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
	1306	fi
	1307	fi
[503]	1308	else
	1309	module_calls=""
[493]	1310	fi
	1311
[892]	1312
[475]	1313	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
	1314	then
[22]	1315
[892]	1316	ssh ${remote_username}@${remote_addres} "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
[22]	1317
[475]	1318	elif [[ $remote_host = ibmh ]]
	1319	then
[22]	1320
[892]	1321	print "$init_cmds $module_calls export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres}
[22]	1322
[475]	1323	elif [[ $remote_host = lctit ]]
	1324	then
[22]	1325
[475]	1326	echo " " > ${remote_host}_last_make_protokoll
	1327	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
	1328	do
[892]	1329	print "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[475]	1330	done
[22]	1331
[892]	1332	elif [[ $remote_host = lcxe6 ]]
[475]	1333	then
[22]	1334
[892]	1335	ssh ${remote_username}@${remote_addres} "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
[22]	1336
[475]	1337	else
[407]	1338
[892]	1339	print "$init_cmds $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[407]	1340
[475]	1341	fi
[22]	1342
[475]	1343	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
[22]	1344
[475]	1345	rm -rf ${remote_host}_last_make_protokoll
[22]	1346
[475]	1347	# make on local host
	1348	else
[22]	1349
[892]	1350	# workaround for lcxe6
	1351	if [[ $remote_host = lcxe6 ]]
[544]	1352	then
[920]	1353
	1354	eval $init_cmds
	1355
[544]	1356	fi
	1357
	1358	# first load modules, if given
	1359	if [[ "$modules" != "" ]]
	1360	then
[678]	1361	if [[ $remote_host = lctit ]]
	1362	then
	1363	. $modules
	1364	else
	1365	module load ${modules}
	1366	fi
[544]	1367	fi
	1368
	1369
[475]	1370	if [[ $compile_utility_programs = false ]]
	1371	then
[22]	1372
[475]	1373	# DEPOSITORY VERZEICHNIS ERZEUGEN, FALLS NOCH NICHT VORHANDEN
	1374	eval remote_md=$remote_md
	1375	if [[ ! -d $remote_md ]]
[40]	1376	then
[475]	1377	if mkdir $remote_md
[215]	1378	then
[475]	1379	printf "\n\n *** directory for make depository:"
	1380	printf "\n $remote_md"
	1381	printf "\n was created\n"
	1382	else
	1383	printf "\n +++ directory for make depository:"
	1384	printf "\n $remote_md"
	1385	printf "\n cannot be created"
	1386	locat=local_depository_path; exit
[215]	1387	fi
[475]	1388	fi
[215]	1389
[475]	1390	# QUELLTEXT-DATEIEN AUS REPOSITORY INS DEPOSITORY KOPIEREN
	1391	echo " "
	1392	echo " *** updating sources in $remote_md"
	1393	cd $remote_md
	1394	cp $local_source_path/${mainprog}_sources.tar .
	1395	tar xf ${mainprog}_sources.tar
[215]	1396
[475]	1397	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
	1398	echo " "
	1399	echo " *** execute \"make\" on local host"
[1]	1400
[475]	1401	make $make_options PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
[40]	1402
[475]	1403	if [[ $? != 0 ]]
	1404	then
	1405	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
	1406	if [[ $silent = false ]]
[1]	1407	then
[475]	1408	answer=dummy
	1409	printf "\n"
	1410	while [[ "$answer" != c && "$answer" != k ]]
	1411	do
	1412	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
	1413	read answer
	1414	if [[ "$answer" = l ]]
[1]	1415	then
[475]	1416	more ${remote_host}_last_make_protokoll
[1]	1417	fi
[475]	1418	done
	1419	if [[ $answer = k ]]
	1420	then
	1421	locat=user_abort; exit
[1]	1422	fi
	1423	fi
[475]	1424	fi
[1]	1425
	1426
[503]	1427	# TAR NEW VERSION ON LOCAL HOST
[475]	1428	printf "\n *** tar update on local host ..."
	1429	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
[1]	1430
[22]	1431
[475]	1432	# COMPILE THE UTILITY PROGRAMS
	1433	elif [[ $compile_utility_programs = true ]]
	1434	then
	1435	printf "\n\n"
	1436	echo " *** compiling the utility programs ..."
	1437	cd ${local_source_path}/../UTIL
[503]	1438
	1439	# TOUCH FILES IN ORDER TO FORCE COMPILATION FOR EVERY BLOCK
	1440	touch *.f90
	1441	make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
[793]	1442
[807]	1443	# CHECK IF QMAKE IS AVAILABLE AND COMPILE MRUNGUI
[811]	1444	if [[ $util_compiled_localhost == false ]]
	1445	then
	1446	printf "\n\n"
	1447	echo " *** compiling the mrun GUI"
	1448	if which qmake >/dev/null; then
	1449	cd mrungui
	1450	touch *
	1451	qmake
	1452	make
	1453	make clean
	1454	rm Makefile
	1455	cd ..
	1456	else
	1457	echo " +++ no qmake found. The (optional) GUI will not be compiled."
	1458	fi
[793]	1459
[811]	1460	# COMPILE CHECK_NAMELIST_FILES (ONLY FOR ONE BRANCH on LOCALHOST NEEDED)
[793]	1461
[811]	1462	printf "\n\n"
	1463	echo " *** compiling check_namelist_files ..."
[807]	1464
[892]	1465	# GET CHECK OPTIONS
	1466	line=""
	1467	found=false
	1468	grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
	1469	while read line1
	1470	do
	1471
	1472	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	1473	then
	1474	line="$line1"
	1475	fi
	1476
	1477	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	1478	then
	1479	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING UND ALLE -D ENTFERNEN
	1480	line="$line "
	1481	copts_check=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g' \| sed 's/-D[^ ]* //g' \| sed 's/ -D.*//g'`
	1482	found=true
	1483	fi
	1484
	1485	done < $tmp_mbuild
	1486	copts_check="$copts_check -D__check -D__parallel"
	1487
[811]	1488	check_depository_path=${local_source_path}/../UTIL
	1489	cd $check_depository_path
	1490	mkdir check_tmp
	1491	cp ${local_source_path}/${mainprog}_sources_check.tar ./check_tmp
	1492	cd check_tmp
	1493	tar -xf ${mainprog}_sources_check.tar
	1494	rm -rf ${mainprog}_sources_check.tar
[807]	1495
[892]	1496	make -f Makefile_check $make_options F90=$compiler_name_ser COPT="$copts_check"
[811]	1497	tar -cf check_namelist_files.tar Makefile_check check_namelist_files.x .f90 .o *.mod
	1498	mv check_namelist_files.tar $check_depository_path
	1499	mv check_namelist_files.x $PALM_BIN
	1500	cd $check_depository_path
	1501	rm -rf check_tmp
	1502	util_compiled_localhost=true
	1503	else
	1504	cd $check_depository_path
	1505	printf "\n\n"
[818]	1506	echo " *** skipped compilation of mrun GUI."
[811]	1507	printf "\n\n"
	1508	echo " *** skipped compilation of check_namelist_files."
	1509	fi
	1510
[1]	1511	fi
	1512	fi
	1513	done
	1514
	1515
	1516	if [[ $host_found = false ]]
	1517	then
	1518	if [[ $host = all ]]
	1519	then
	1520	printf "\n +++ no hosts found in configuration file"
	1521	else
	1522	printf "\n +++ host \"$host\" not found in configuration file"
	1523	fi
	1524	locat=config_file; exit
	1525	fi
	1526
[936]	1527	if [[ "$block_conditions" != none && $block_conditions_found = false ]]
	1528	then
	1529	printf "\n +++ block conditions \"$block_conditions\" not found for host \"$host\""
	1530	fi
[1]	1531
	1532
[503]	1533	# FINAL WORK
[1]	1534	rm -f hosts_found_in_config_file
[811]	1535	rm -f ${local_source_path}/${mainprog}_sources_check.tar
[1]	1536

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |