Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 823

Last change on this file since 823 was 818, checked in by maronga, 13 years ago
bugfix: namelist file check now possible for topography and re-enabled. mrungui update (-z option)
Property svn:keywords set to `Id Rev`
File size: 51.4 KB

Rev	Line
[1]	1	#!/bin/ksh
[503]	2	# mbuild - script for compiling the PALM code and its utility programs
[169]	3	# $Id: mbuild 818 2012-02-08 16:11:23Z maronga $
[1]	4
[503]	5	# Procedure to compile code on local and remote hosts using the
	6	# make-mechanism. The source code must be provided on the local host.
[1]	7
[503]	8	# Last changes:
	9	# 06/05/02 - Siggi - start development
	10	# 12/06/02 - Siggi - first version finished
	11	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) included
	12	# 19/12/02 - Siggi - ibmb included
[1]	13	# 05/02/03 - Siggi - hostname nobela included
	14	# 04/03/03 - Siggi - host nech included
	15	# 06/03/03 - Siggi - make_call_string is echoed without '' to
	16	# file LAST_MAKE_CALL (otherwise error on NEC, because
	17	# '' are part of compiler options
	18	# 16/03/03 - Siggi - Two underscores are placed in front of every define
	19	# string, in case that palm.f90 version contains
	20	# such strings
	21	# 16/04/03 - Siggi - First extensions for linux machines
	22	# 24/06/03 - Siggi - host orkan included
	23	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
	24	# 24/07/03 - Siggi - host maestro admitted
	25	# 06/08/03 - Siggi - host gregale admitted
	26	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
	27	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
	28	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
	29	# (-D$OMP=OMP) in order to avoid problems with
	30	# OMP_NUM_THREADS
	31	# 09/01/04 - Siggi - action above cancelled
	32	# 28/01/04 - Siggi - action above re-cancelled
	33	# 08/03/04 - Siggi - host scirocco admitted
	34	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
	35	# the respective .f90 file is not listed in the makefile
	36	# and deletion is demanded by the user
	37	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
	38	# due to error in ssh installation (otherwise a prompt
	39	# for the password appears)
	40	# 23/07/04 - Siggi - changes due to the new berni configuration
	41	# (federation switch)
	42	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
	43	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
	44	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
	45	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
	46	# 24/04/05 - Siggi - netcdf support on lcmuk
	47	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
	48	# 12/05/05 - Siggi - netcdf support on ibm
	49	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
	50	# 18/05/05 - Siggi - netcdf support on nec
	51	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
	52	# 23/05/05 - Siggi - netcdf support on ibms
	53	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
	54	# 30/06/05 - Siggi - netcdf support on bora
	55	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
	56	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
	57	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
	58	# host gfdl5 (ibmy) admitted
	59	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
	60	# 20/01/06 - Siggi - cpp directive for ibmy
	61	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
	62	# 10/02/06 - Siggi - modifications for scp on decalpha
	63	# 13/04/06 - Siggi - ostria admitted
	64	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
	65	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
	66	# 29/05/05 - Siggi - atmos (lcide) admitted
	67	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
	68	# 24/11/06 - Siggi - breva and levanto admitted
	69	# 07/02/07 - Siggi - adapted for RIAM (neck)
[5]	70	# 10/02/07 - Siggi - all hpmuk-related code removed
[40]	71	# 02/03/07 - Siggi - compilation of utility programs and transfer of
[27]	72	# scripts to remote hosts added (option -u)
[66]	73	# 14/03/07 - Siggi - fimm admitted, revision number added to terminal
	74	# output
[69]	75	# 16/03/07 - Siggi - adjustments (netcdf) for lctit
	76	# adjustments for running under pdksh, local ip-addres
	77	# is not determined any more
[82]	78	# 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
	79	# from configuration file
	80	# host identifier (local_host) is read from config file
[116]	81	# 10/10/07 - Siggi - bugfix: handling of comment lines
[181]	82	# 18/07/08 - Siggi - adapted for lcsgih
	83	# 21/07/08 - Siggi - mainprog (executable) is added to the tar-file
	84	# ({mainprog}_current_version)
[206]	85	# 02/10/08 - Siggi - adapted for lcxt4
[215]	86	# 14/11/08 - Siggi - update mechanism completely revised: source tarfile
	87	# remains in source directory, one depository per block
[266]	88	# (given in the config-file) is created, allways all
	89	# files from the source directory are copied to the
	90	# respective depository, no additional file checks are
	91	# done any more (version 2.1)
[224]	92	# 13/01/09 - Marcus- re-enable compilation more than once on lcmuk (as on
	93	# other machines)
[266]	94	# 21/03/09 - Siggi - -u copies also copies process_dvr_output and
	95	# .dvrserver.config
[305]	96	# 21/04/09 - Siggi - adjustments for new IBM at DKRZ, which is now ibmh
[367]	97	# 25/08/09 - BjornM- adapted for lck
[407]	98	# 01/12/09 - BjornM- re-adjustments for lcxt4
[437]	99	# 01/02/10 - Siggi - adjustments for lcxt5m
[475]	100	# 03/02/10 - Siggi - make options (mopts) to be set by configuration file
	101	# implemented, remoted mode option -r completely
	102	# removed, t3e related parts removed
[492]	103	# 26/02/10 - BjornM- re-adjustments for lcxt4 (new modules)
[493]	104	# 01/03/10 - Siggi - mpilib replaced by modules: explicit module settings
	105	# removed; modules should now be given in the
	106	# configuration file
[503]	107	# 02/03/10 - Siggi - utility programs are created separately for each
	108	# block in the configuration file,
	109	# parallel make for utility programs
[508]	110	# 12/03/10 - Siggi - bugfix: remode_md was given a wrong value
[544]	111	# 16/08/10 - BjornM- bugfix: call of modules on local host, new workaround
	112	# for lcxt4
[555]	113	# 07/09/10 - Siggi - bugfix for wrong netcdf/3.6.3 module on lcsgi
[622]	114	# 08/12/10 - Siggi - initialization of the module command changed for
	115	# SGI-ICE/lcsgi
	116	# adjustments for Kyushu Univ. (lcrte, ibmku)
[635]	117	# 14/12/10 - Siggi - adjustments for new Tsubame system at Tokyo
	118	# institute of technology (lctit)
[693]	119	# 04/03/11 - BjornM- re-adjustments for lcxt4
	120	# 06/03/11 - Siggi - adjustments for ibmkisti
[717]	121	# 03/04/11 - Micha - added lckordi
[740]	122	# 17/08/11 - Siggi - HLRN access via hicegate0 (130.75.4.101)
[784]	123	# 27/11/11 - Siggi - Bugfix for make options setting (-j)
[793]	124	# 12/12/11 - BjornM- added mrun GUI to ulitity programs
[807]	125	# 25/01/12 - BjornM- compilation of check_namelist_files (namelist file
	126	# check program) has been added to the utility branch),
	127	# modfified the compilation of mrungui
[811]	128	# 31/01/12 - BjornM- bugfix for compilation of utility programs on
	129	# multiple localhost branches
[818]	130	# 08/03/12 - BjornM- bugfix: cpp directive for namelist check program
	131	# corrected
[1]	132
	133
[508]	134
[503]	135	# VARIABLE DECLARATIONS + DEFAULT VALUES
[22]	136	compile_utility_programs=false
[1]	137	config_file=.mrun.config
[67]	138	fimm=false
[1]	139	host=all
	140	host_found=false
	141	locat=normal
	142	makefile=""
[493]	143	module_calls=""
[811]	144	util_compiled_localhost=false
[1]	145	scirocco=false
	146	silent=false
	147	suf=f90
	148	update=false
[83]	149	working_directory=`pwd`
[1]	150
	151	typeset -i ih ihost=0
	152
[66]	153	typeset -R30 calltime
[1]	154	typeset -L20 column1
	155	typeset -L50 column2
	156	typeset -L70 column3
[215]	157	typeset -L40 version="MBUILD 2.1 Rev$Rev: 818 $"
[1]	158
[503]	159	# ERROR HANDLING
	160	# IN CASE OF EXIT:
[83]	161	trap 'rm -rf $working_directory/tmp_mbuild
[69]	162	if [[ $locat != normal ]]
[1]	163	then
	164	printf "\n\n +++ mbuild killed \n\n"
	165	else
	166	printf "\n\n *** mbuild finished \n\n"
	167	fi' exit
	168
	169
[503]	170	# IN CASE OF TERMINAL-BREAK:
[83]	171	trap 'rm -rf $working_directory/tmp_mbuild
[69]	172	printf "\n\n +++ mbuild killed by \"^C\" \n\n"
[1]	173	exit
	174	' 2
	175
	176
[215]	177	tmp_mbuild=${working_directory}/tmp_mbuild
[1]	178
[503]	179	# READ SHELLSCRIPT-OPTIONS
[475]	180	while getopts :c:h:m:s:u option
[1]	181	do
	182	case $option in
	183	(c) config_file=$OPTARG;;
	184	(h) host=$OPTARG;;
	185	(m) makefile=$OPTARG;;
	186	(s) suf=$OPTARG;;
[22]	187	(u) compile_utility_programs=true;;
[1]	188	(\?) printf "\n +++ unknown option $OPTARG \n";
	189	locat=parameter; exit;;
	190	esac
	191	done
	192
	193
	194
[503]	195	# CHECK, IF CONFIGURATION-FILE EXISTS
[82]	196	if [[ ! -f $config_file ]]
	197	then
	198	printf "\n +++ configuration file: "
	199	printf "\n $config_file"
	200	printf "\n does not exist"
	201	locat=configuration; exit
	202	fi
	203
	204
	205
[503]	206	# DETERMINE THE LOCAL HOST
[1]	207	local_host_real_name=$(hostname)
[69]	208	# local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
	209
[1]	210
[82]	211
[503]	212	# DETERMINE HOST-IDENTIFIER (local_host) FROM THE CONFIG-FILE
[82]	213	line=""
[215]	214	grep "%host_identifier" $config_file > $tmp_mbuild
[82]	215	while read line
	216	do
[116]	217	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
[82]	218	then
	219	HOSTNAME=`echo $line \| cut -d" " -s -f2`
	220	host_identifier=`echo $line \| cut -d" " -s -f3`
[83]	221	if [[ $local_host_real_name = $HOSTNAME ]]
[82]	222	then
	223	local_host=$host_identifier
	224	break
	225	fi
	226	fi
[215]	227	done < $tmp_mbuild
[82]	228
	229	if [[ "$local_host" = "" ]]
	230	then
	231	printf "\n +++ no host identifier found in configuration file \"$config_file\""
	232	printf "\n for local host \"$local_host_real_name\"."
	233	printf "\n Please add line"
	234	printf "\n \"\%host_identifier $local_host_real_name <identifier>\""
	235	printf "\n to the configuration file."
	236	locat=local_host; exit
	237	fi
	238
	239
	240
[1]	241	[[ $local_host_real_name = scirocco ]] && scirocco=true
[67]	242	[[ $local_host_real_name = fimm.bccs.uib.no ]] && fimm=true
[1]	243
	244
	245
	246	if [[ $local_host != ibms ]]
	247	then
	248	config_file=$PWD/$config_file
	249	else
	250	config_file=`pwd`/$config_file
	251	fi
	252
	253
	254
[503]	255	# DETERMINE USER NAME ON LOCAL HOST FROM THE CONFIG-FILE
[1]	256	line=""
[215]	257	grep " $local_host" $config_file \| grep "%remote_username" > $tmp_mbuild
[69]	258	while read line
[1]	259	do
[116]	260	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
[1]	261	then
	262	local_username=`echo $line \| cut -d" " -s -f2`
	263	fi
[215]	264	done < $tmp_mbuild
[1]	265
[82]	266
[1]	267	if [[ "$local_username" = "" ]]
	268	then
	269	printf "\n +++ no user name found in configuration file"
	270	printf "\n for local host \"$local_host\" "
	271	locat=config_file; exit
	272	fi
	273
	274
[503]	275	# DETERMINE LOCAL SOURCE-CODE PATH.
	276	# FIRST CHECK, IF A GLOBAL SOURCE-CODE PATH HAS BEEN DECLARED FOR ALL HOSTS.
	277	# THEREFORE, FIRST SET ALL GLOBAL VARIABLES DECLARED IN THE CONFIG-FILE,
	278	# BECAUSE THEY MAY BE USED AS PART OF THE PATH NAME.
[5]	279	line=""
[215]	280	grep "%" $config_file > $tmp_mbuild
[69]	281	while read line
[5]	282	do
[116]	283	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" && $(echo $line \| cut -c1) != "#" ]]
[1]	284	then
[5]	285	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
	286	value=`echo $line \| cut -d" " -s -f2`
[8]	287	eval export $var=\$value
[1]	288	fi
[215]	289	done < $tmp_mbuild
[1]	290
[503]	291	# NOW CHECK, IF A GLOBAL SOURCE-CODE-PATH HAS BEEN DECLARED
[1]	292	line=""
[215]	293	grep "%source_path" $config_file > $tmp_mbuild
[69]	294	while read line
[1]	295	do
	296	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	297	then
	298	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
	299	then
	300	global_source_path=`echo $line \| cut -d" " -s -f2`
	301	fi
	302	fi
[215]	303	done < $tmp_mbuild
[1]	304
	305	line=""
[215]	306	grep " $local_host" $config_file \| grep "%source_path" > $tmp_mbuild
[69]	307	while read line
[1]	308	do
	309	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	310	then
	311	local_source_path=`echo $line \| cut -d" " -s -f2`
	312	fi
[215]	313	done < $tmp_mbuild
[1]	314
	315	if [[ "$local_source_path" = "" ]]
	316	then
	317	if [[ "$global_source_path" != "" ]]
	318	then
	319	local_source_path=$global_source_path
	320	else
	321	printf "\n +++ no source path found in configuration file"
	322	printf "\n for local host \"$local_host\" "
	323	printf "\n please set \"\%source_path\" in configuration file"
	324	locat=config_file; exit
	325	fi
	326	fi
	327	eval local_source_path=$local_source_path
[8]	328	eval local_source_path=$local_source_path
[1]	329
	330
[215]	331
[503]	332	# DETERMINE GLOBAL DEPOSITORY-PATH
[1]	333	line=""
[215]	334	grep "%depository_path" $config_file > $tmp_mbuild
[69]	335	while read line
[1]	336	do
	337	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	338	then
	339	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
	340	then
	341	global_depository_path=`echo $line \| cut -d" " -s -f2`
	342	fi
	343	fi
[215]	344	done < $tmp_mbuild
[1]	345
[807]	346	if [[ $found = false ]]
	347	then
	348	printf "\n +++ no \%depository_path found in"
	349	printf "\n $config_file"
	350	locat=depository_path; exit
	351	fi
[1]	352
[503]	353	# CHECK, IF A MAIN PROGRAM HAS BEEN DEFINED IN THE CONFIG-FILE
[5]	354	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
	355	then
	356	printf "\n +++ no main program or more than one main program defined"
	357	printf "\n in configuration file"
	358	locat=configuration; exit
	359	else
	360	line=`grep "%mainprog" $config_file`
	361	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
	362	then
	363	printf "\n +++ no main program defined in configuration file"
	364	locat=configuration; exit
	365	fi
	366	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
	367	fi
	368
	369
	370
[503]	371	# CHECK IF MAKEFILE EXITS
[1]	372	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
	373	if [[ ! -f $makefile ]]
	374	then
	375	printf "\n +++ makefile: "
	376	printf "\n $makefile"
	377	printf "\n does not exist"
	378	locat=makefile; exit
	379	fi
	380
	381
[503]	382	# HEADER-OUTPUT (PART1: MESSAGES CONCERNING THE LOCAL HOST)
[1]	383	calltime=$(date)
	384	printf "\n"
	385	printf "#------------------------------------------------------------------------# \n"
	386	printf "\| $version$calltime \| \n"
	387	printf "\| \| \n"
	388	column1="called on:"; column2=$local_host_real_name
	389	printf "\| $column1$column2 \| \n"
	390	column1="local username:"; column2=$local_username
	391	printf "\| $column1$column2 \| \n"
	392	column1="local IP-addres:"; column2=$local_addres
	393	printf "\| $column1$column2 \| \n"
	394	column1="config file:"; column2=$config_file
	395	printf "\| $column1$column2 \| \n"
	396	column1="makefile:"; column2=$makefile
	397	printf "\| $column1$column2 \| \n"
	398	column1="local source path:"; column2=$local_source_path
	399	printf "\| $column1$column2 \| \n"
	400	printf "#------------------------------------------------------------------------# \n"
	401
	402	# printf "\| \| \n"
	403
	404
[40]	405	if [[ $compile_utility_programs = false ]]
	406	then
[1]	407
[503]	408	# IN ANY CASE, GIVE ALL FILES WRITE-PERMIT, IN ORDER TO AVOID PROBLEMS
	409	# WITH OVERWRITING FILES ON THE REMOTE HOST
[215]	410	cd $local_source_path
	411	printf "\n\n *** tar of makefile and source files in $local_source_path"
[40]	412	tar -cf ${mainprog}_sources.tar Makefile *.$suf
	413	printf "\n"
[1]	414
[807]	415	else
	416	cd $local_source_path
	417	printf "\n\n *** tar of makefile and source files in $local_source_path"
	418
	419	cat Makefile_check\|while read line
	420	do
	421	line=$(echo $line\|grep RCS)
	422	if [[ $line == "RCS" ]]
	423	then
	424	line=$(echo $line\|sed 's/RCS = //g')
	425	break
	426	fi
	427	done
	428
	429	tar -cf ${mainprog}_sources_check.tar Makefile_check $line
	430	printf "\n"
[40]	431	fi
[1]	432
	433
[40]	434
[503]	435	# GET CONFIRMATION TO CONTINUE
[1]	436	if [[ $host = all ]]
	437	then
	438	printf "\n *** updates will be made for ALL hosts found in"
	439	printf "\n the configuration file"
	440	else
	441	printf "\n *** update will be made for host \"$host\" "
	442	fi
	443
	444	if [[ $silent = false ]]
	445	then
	446	answer=dummy
	447	printf "\n\n"
	448	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
	449	do
	450	printf " >>> continue (y/n) ? "
	451	read answer
	452	done
	453	if [[ $answer = n \|\| $answer = N ]]
	454	then
	455	locat=user_abort; exit
	456	fi
	457	fi
	458
	459
	460
	461
	462	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
	463	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
	464	printf "\n *** scanning configuration file for host(s) ..."
	465
[215]	466	grep %fopts $config_file > $tmp_mbuild
[69]	467	while read line
[1]	468	do
	469	# KOMMENTARZEILEN UEBERSPRINGEN
	470	[[ $(echo $line \| cut -c1) = "#" ]] && continue
	471	(( ihost = ihost + 1 ))
	472	hostline[$ihost]="$line"
[215]	473	done < $tmp_mbuild
[1]	474
	475
	476	while (( ih < ihost ))
	477	do
	478
	479	(( ih = ih + 1 ))
	480
	481	# REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
	482	# NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
	483	# SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
	484	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
	485	remote_host=`echo $remote_host_string \| cut -d" " -f1`
	486	if [[ $host != all ]]
	487	then
	488	[[ $remote_host != $host ]] && continue
	489	fi
	490	host_found=true
	491	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
	492	if [[ $condition1 = $remote_host ]]
	493	then
	494	condition1=""
	495	else
	496	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
	497	fi
	498
[493]	499	modules=""
[82]	500	netcdf_inc=""
	501	netcdf_lib=""
[784]	502	make_options=""
[1]	503
	504	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
	505	case $remote_host in
[717]	506	(lckordi) remote_adress=210.219.61.8;;
[116]	507	(lcmuk) remote_addres=130.75.105.2;;
[622]	508	(lcrte) remote_addres=133.5.185.60;;
[181]	509	(lcsgib) remote_addres=130.73.232.102;;
[740]	510	(lcsgih) remote_addres=130.75.4.101;;
[367]	511	(lck) remote_addres=165.132.26.61;;
[635]	512	(lctit) remote_addres=10.1.6.170;;
[206]	513	(lcxt4) remote_addres=129.177.20.113;;
[437]	514	(lcxt5m) remote_addres=193.166.211.144;;
[83]	515	(decalpha) remote_addres=165.132.26.56;;
[305]	516	(ibmh) remote_addres=136.172.40.15;;
[693]	517	(ibmkisti) remote_addres=150.183.146.24;;
[622]	518	(ibmku) remote_addres=133.5.4.129;;
[83]	519	(ibms) remote_addres=150.183.5.101;;
	520	(ibmy) remote_addres=165.132.26.58;;
	521	(nech) remote_addres=136.172.44.192;;
	522	(neck) remote_addres=133.5.178.11;;
	523	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
	524	(*) if [[ $local_host != $remote_host ]]
[1]	525	then
[83]	526	printf "\n +++ remote host \"$remote_host\" unknown";
[503]	527	printf "\n please inform PALM group support!"
[1]	528	fi;;
	529	esac
	530
	531
	532	# REMOTE-USERNAMEN ERMITTELN
	533	line=""
[116]	534	found=false
[215]	535	grep "$remote_host_string" $config_file \| grep "%remote_username" > $tmp_mbuild
[69]	536	while read line1
[1]	537	do
[116]	538
[1]	539	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	540	then
	541	line="$line1"
	542	fi
[116]	543
	544	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	545	then
	546	remote_username=`echo $line \| cut -d" " -s -f2`
	547	found=true
	548	fi
	549
[215]	550	done < $tmp_mbuild
[1]	551
[116]	552	if [[ $found = false ]]
[1]	553	then
	554	printf "\n +++ no remote username found in configuration file"
	555	printf "\n for \"$remote_host_string\" "
	556	locat=config_file; exit
	557	fi
	558
	559
	560	# REMOTE-QUELLTEXTPFAD ERMITTELN
	561	line=""
[54]	562	remote_source_path=""
[215]	563	grep "$remote_host_string" $config_file \| grep "%source_path" > $tmp_mbuild
[69]	564	while read line1
[1]	565	do
[116]	566
[1]	567	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	568	then
	569	line="$line1"
	570	fi
[116]	571
	572	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	573	then
	574	remote_source_path=`echo $line \| cut -d" " -s -f2`
	575	fi
	576
[215]	577	done < $tmp_mbuild
[1]	578
	579	if [[ "$remote_source_path" = "" ]]
	580	then
	581	if [[ "$global_source_path" != "" ]]
	582	then
	583	remote_source_path=$global_source_path
	584	else
	585	printf "\n +++ no source path found in configuration file"
	586	printf "\n for \"$remote_host_string\" "
	587	locat=config_file; exit
	588	fi
	589	fi
	590
[22]	591	remote_ud=${remote_source_path}/../UTIL
[24]	592	remote_ud=$(eval echo $remote_ud)
[1]	593
[54]	594
[1]	595	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
[54]	596	remote_md=""
[1]	597	line=""
[215]	598	grep "$remote_host_string" $config_file \| grep "%depository_path" > $tmp_mbuild
[69]	599	while read line1
[1]	600	do
[116]	601
[1]	602	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	603	then
	604	line="$line1"
	605	fi
[116]	606
	607	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	608	then
	609	remote_md=`echo $line \| cut -d" " -s -f2`
	610	fi
	611
[215]	612	done < $tmp_mbuild
[1]	613
	614	if [[ "$remote_md" = "" ]]
	615	then
	616	if [[ "$global_depository_path" != "" ]]
	617	then
	618	remote_md=$global_depository_path
	619	else
	620	printf "\n +++ no depository path found in configuration file"
	621	printf "\n for \"$remote_host_string\" "
	622	printf "\n please set \"\%depository_path\" in configuration file"
	623	locat=config_file; exit
	624	fi
	625	fi
	626
[8]	627	remote_md=$(eval echo $remote_md)
[503]	628	block=""
	629	[[ "$condition1" != "" ]] && block=_$condition1
	630	[[ "$condition2" != "" ]] && block=${block}_$condition2
[508]	631	remote_md=${remote_md}$block
[1]	632
[8]	633
[1]	634	# COMPILERNAMEN ERMITTELN
	635	line=""
[116]	636	found=false
[215]	637	grep "$remote_host_string" $config_file \| grep "%compiler_name " > $tmp_mbuild
[69]	638	while read line1
[1]	639	do
[116]	640
[1]	641	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	642	then
	643	line="$line1"
	644	fi
[116]	645
	646	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	647	then
	648	compiler_name=`echo $line \| cut -d" " -s -f2`
	649	found=true
	650	fi
	651
[215]	652	done < $tmp_mbuild
[1]	653
[116]	654	if [[ $found = false ]]
[1]	655	then
	656	printf "\n +++ no compiler name found in configuration file"
	657	printf "\n for \"$remote_host_string\" "
	658	locat=config_file; exit
	659	fi
	660
	661
[27]	662	# BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
	663	# SERIELLER COMPILERNAME ERMITTELT WERDEN
	664	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
	665	then
	666	line=""
[116]	667	found=false
[215]	668	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" > $tmp_mbuild
[69]	669	while read line1
[27]	670	do
[116]	671
[27]	672	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	673	then
	674	line="$line1"
	675	fi
[116]	676
	677	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	678	then
	679	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
	680	found=true
	681	fi
	682
[215]	683	done < $tmp_mbuild
[1]	684
[116]	685	if [[ $found = false ]]
[27]	686	then
[28]	687	printf "\n +++ no serial compiler name found in configuration file"
[27]	688	printf "\n for \"$remote_host_string\" "
	689	locat=config_file; exit
	690	fi
	691	else
	692	compiler_name_ser=$compiler_name
	693	fi
	694
	695
	696
[82]	697	# PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
	698	line=""
[116]	699	found=false
[215]	700	grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
[82]	701	while read line1
	702	do
[116]	703
[82]	704	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	705	then
	706	line="$line1"
	707	fi
[116]	708
	709	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	710	then
	711	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	712	cpp_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	713	found=true
	714	fi
	715
[215]	716	done < $tmp_mbuild
[116]	717
	718	if [[ $found = false ]]
[82]	719	then
	720	printf "\n +++ no preprocessor options found in configuration file"
	721	printf "\n for \"$remote_host_string\" "
	722	locat=config_file; exit
	723	fi
	724
[116]	725
[82]	726	# RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
	727	for string in $remote_host_string
	728	do
	729	if [[ $(echo $remote_host \| cut -c1-2) = lc && $(echo $string \| cut -c1-2) = lc ]]
	730	then
	731	cpp_options="$cpp_options -D__lc "
[83]	732	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $(echo $string \| cut -c1-3) = ibm ]]
	733	then
	734	cpp_options="${cpp_options},-D__ibm"
	735	elif [[ $(echo $remote_host \| cut -c1-3) = nec && $(echo $string \| cut -c1-3) = nec ]]
	736	then
	737	cpp_options="${cpp_options} -D__nec"
[82]	738	else
[83]	739	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
	740	then
	741	cpp_options="${cpp_options},-D__$string"
	742	else
	743	cpp_options="$cpp_options -D__$string "
	744	fi
[82]	745	fi
	746	done
	747
	748
	749
	750	# NETCDF-OPTIONEN ERMITTELN
	751	line=""
[215]	752	grep "$remote_host_string" $config_file \| grep "%netcdf_inc" > $tmp_mbuild
[82]	753	while read line1
	754	do
[116]	755
[82]	756	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	757	then
	758	line="$line1"
	759	fi
[116]	760
	761	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	762	then
	763	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	764	netcdf_inc=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	765	fi
	766
[215]	767	done < $tmp_mbuild
[82]	768
	769	line=""
[215]	770	grep "$remote_host_string" $config_file \| grep "%netcdf_lib" > $tmp_mbuild
[82]	771	while read line1
	772	do
[116]	773
[82]	774	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	775	then
	776	line="$line1"
	777	fi
[116]	778
	779	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	780	then
	781	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	782	netcdf_lib=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	783	fi
	784
[215]	785	done < $tmp_mbuild
[82]	786
	787
	788
[475]	789	# get make options
	790	line=""
	791	found=false
	792	grep "$remote_host_string" $config_file \| grep "%mopts" > $tmp_mbuild
	793	while read line1
	794	do
	795
	796	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	797	then
	798	line="$line1"
	799	fi
	800
	801	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	802	then
	803	# remove colons from directive string
	804	make_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	805
	806	fi
	807
	808	done < $tmp_mbuild
	809
	810
	811
[1]	812	# COMPILEROPTIONEN ERMITTELN
	813	line=""
[116]	814	found=false
[215]	815	grep "$remote_host_string" $config_file \| grep "%fopts" > $tmp_mbuild
[69]	816	while read line1
[1]	817	do
[116]	818
[1]	819	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	820	then
	821	line="$line1"
	822	fi
[116]	823
	824	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	825	then
	826	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	827	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	828	found=true
	829
	830	# NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
	831	compiler_options="$compiler_options $netcdf_inc"
	832	fi
	833
[215]	834	done < $tmp_mbuild
[116]	835
	836	if [[ $found = false ]]
[1]	837	then
	838	printf "\n +++ no compiler options found in configuration file"
	839	printf "\n for \"$remote_host_string\" "
	840	locat=config_file; exit
	841	fi
[82]	842
[1]	843
	844
[503]	845	# get modules to be loaded
[221]	846	line=""
[493]	847	grep "$remote_host_string" $config_file \| grep "%modules" > $tmp_mbuild
[221]	848	while read line1
	849	do
	850
	851	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	852	then
	853	line="$line1"
	854	fi
	855
	856	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	857	then
	858	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
[493]	859	modules=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
[221]	860	fi
	861
	862	done < $tmp_mbuild
	863
	864
	865
	866
[1]	867	# LADER-OPTIONEN ERMITTELN
	868	line=""
[116]	869	found=false
[215]	870	grep "$remote_host_string" $config_file \| grep "%lopts" > $tmp_mbuild
[69]	871	while read line1
[1]	872	do
[116]	873
[1]	874	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	875	then
	876	line="$line1"
	877	fi
[116]	878
	879	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	880	then
	881	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	882	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	883	found=true
	884
	885	# NETCDF-LIBRARY HINZUFUEGEN
	886	loader_options="$loader_options $netcdf_lib"
	887	fi
	888
[215]	889	done < $tmp_mbuild
[1]	890
[116]	891	if [[ $found = false ]]
[1]	892	then
	893	printf "\n +++ no loader options found in configuration file"
	894	printf "\n for \"$remote_host_string\" "
	895	locat=config_file; exit
	896	fi
[82]	897
[1]	898
	899	printf "\n\n#------------------------------------------------------------------------# \n"
	900	if [[ $remote_host = $local_host ]]
	901	then
	902	column1="remote_host:"; column2="$remote_host (= local host!)"
	903	else
	904	column1="remote_host:"; column2=$remote_host
	905	fi
	906	printf "\| $column1$column2 \| \n"
	907	printf "\| \| \n"
	908	column1="conditions:"; column2="$condition1 $condition2"
	909	printf "\| $column1$column2 \| \n"
	910	column1="make depository:"; column2=$remote_md
	911	printf "\| $column1$column2 \| \n"
[215]	912	line=$(echo "$remote_md" \| cut -c51-)
	913	while [[ "$line" != "" ]]
	914	do
	915	column1=""
	916	column2=$line
	917	printf "\| $column1$column2 \| \n"
	918	line=$(echo "$line" \| cut -c51-)
	919	done
[25]	920	if [[ $compile_utility_programs = true ]]
	921	then
	922	column1="utility directory:"; column2=$remote_ud
	923	printf "\| $column1$column2 \| \n"
	924	fi
[1]	925	column1="username:"; column2=$remote_username
	926	printf "\| $column1$column2 \| \n"
	927	column1="addres:"; column2=$remote_addres
	928	printf "\| $column1$column2 \| \n"
	929	column1="compiler:"; column2=$compiler_name
	930	printf "\| $column1$column2 \| \n"
[28]	931	if [[ $compile_utility_programs = true ]]
	932	then
	933	column1="serial compiler:"; column2=$compiler_name_ser
	934	printf "\| $column1$column2 \| \n"
	935	fi
[475]	936	if [[ "$make_options" != "" ]]
	937	then
	938	column1="make options:"; column2=$make_options
	939	printf "\| $column1$column2 \| \n"
	940	fi
[1]	941	column1="cpp options:"; column2=$cpp_options
	942	printf "\| $column1$column2 \| \n"
	943	line=$(echo "$cpp_options" \| cut -c51-)
	944	while [[ "$line" != "" ]]
	945	do
	946	column1=""
	947	column2=$line
	948	printf "\| $column1$column2 \| \n"
	949	line=$(echo "$line" \| cut -c51-)
	950	done
	951	column1="compiler options:"; column2=$compiler_options
	952	printf "\| $column1$column2 \| \n"
	953	line=$(echo "$compiler_options" \| cut -c51-)
	954	while [[ "$line" != "" ]]
	955	do
	956	column1=""
	957	column2=$line
	958	printf "\| $column1$column2 \| \n"
	959	line=$(echo "$line" \| cut -c51-)
	960	done
	961	column1="loader options:"; column2=$loader_options
	962	printf "\| $column1$column2 \| \n"
	963	line=$(echo "$loader_options" \| cut -c51-)
	964	while [[ "$line" != "" ]]
	965	do
	966	column1=""
	967	column2=$line
	968	printf "\| $column1$column2 \| \n"
	969	line=$(echo "$line" \| cut -c51-)
	970	done
[493]	971	if [[ $modules != "" ]]
	972	then
	973	column1="modules to be load:"; column2=$modules
	974	printf "\| $column1$column2 \| \n"
	975	line=$(echo "$modules" \| cut -c51-)
	976	while [[ "$line" != "" ]]
	977	do
	978	column1=""
	979	column2=$line
	980	printf "\| $column1$column2 \| \n"
	981	line=$(echo "$line" \| cut -c51-)
	982	done
	983	fi
[1]	984	printf "#------------------------------------------------------------------------# \n"
	985
	986	if [[ $silent = false ]]
	987	then
	988	answer=dummy
	989	printf "\n\n"
	990	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
	991	do
	992	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
	993	read answer
	994	done
	995	if [[ $answer = a \|\| $answer = A ]]
	996	then
	997	locat=user_abort; exit
	998	fi
	999	if [[ $answer = c \|\| $answer = C ]]
	1000	then
[503]	1001	silent=true
[1]	1002	fi
	1003	if [[ $answer = s \|\| $answer = S ]]
	1004	then
	1005	continue
	1006	fi
	1007	fi
	1008
	1009
[475]	1010	# make on remote host
	1011	if [[ $remote_host != $local_host ]]
[1]	1012	then
	1013
[475]	1014	if [[ $compile_utility_programs = false ]]
[1]	1015	then
	1016
[475]	1017	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	1018	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
	1019	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
	1020	if [[ $remote_host != lctit ]]
	1021	then
	1022	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
	1023	else
	1024	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	1025	# MIT SSH, DESHALB AUFRUF PER PIPE
	1026	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
	1027	fi
	1028	if [[ $local_host = decalpha ]]
	1029	then
	1030	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
	1031	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1032	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1033	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
	1034	/bin/scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
	1035	else
	1036	scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
	1037	fi
[1]	1038
	1039
	1040
[475]	1041	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
	1042	echo " *** untar previous update on remote host, if existing"
	1043	if [[ $remote_host != lctit ]]
	1044	then
	1045	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
	1046	else
	1047	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	1048	# MIT SSH, DESHALB AUFRUF PER PIPE
	1049	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
	1050	fi
[1]	1051
	1052
[475]	1053	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
	1054	echo " *** untar actual sources on remote host"
	1055	if [[ $remote_host != lctit ]]
	1056	then
	1057	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
	1058	else
	1059	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	1060	# MIT SSH, DESHALB AUFRUF PER PIPE
	1061	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
	1062	fi
[1]	1063
	1064
[475]	1065	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1066	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
	1067	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
	1068	# Z.B. DIE PFADE ZUM COMPILER)
	1069	echo " *** execute \"make\" on remote host"
[1]	1070
[493]	1071
	1072	# generate make call with make options
[475]	1073	if [[ $remote_host = nech ]]
	1074	then
	1075	make_call_string="sxmake $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1076	else
	1077	make_call_string="make $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1078	fi
[1]	1079
[493]	1080	# generate command to load modules, if modules are given
	1081	if [[ "$modules" != "" ]]
	1082	then
[678]	1083	if [[ $remote_host = lctit ]]
	1084	then
	1085	module_calls=". $modules"
	1086	else
	1087	module_calls="module load ${modules};"
	1088	fi
[555]	1089
	1090	# bugfix for wrong netcdf module
	1091	if [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
	1092	then
	1093	if [[ $(echo $module_calls \| grep -c netcdf/3.6.3-intel) != 0 ]]
	1094	then
	1095	module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
	1096	fi
	1097	fi
[503]	1098	else
	1099	module_calls=""
[493]	1100	fi
	1101
[693]	1102	if [[ $remote_host = ibmkisti \|\| $remote_host = ibms \|\| $remote_host = ibmy ]]
[475]	1103	then
[1]	1104
[493]	1105	ssh ${remote_username}@${remote_addres} "$module_calls cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1106
[475]	1107	elif [[ $remote_host = ibmh ]]
	1108	then
[1]	1109
[493]	1110	print "$module_calls export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1111
[475]	1112	elif [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
	1113	then
[1]	1114
[622]	1115	# print ". /usr/share/modules/init/bash; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1116	print "eval \`/sw/swdist/bin/modulesinit\`; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1117
[475]	1118	elif [[ $remote_host = lctit ]]
	1119	then
[1]	1120
[475]	1121	echo " " > ${remote_host}_last_make_protokoll
	1122	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
	1123	do
	1124	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1125	done
[1]	1126
[475]	1127	elif [[ $remote_host = lcxt4 ]]
[1]	1128	then
	1129
[691]	1130	ssh ${remote_username}@${remote_addres} ". /opt/modules/default/init/ksh; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1131
[475]	1132	else
[1]	1133
[493]	1134	print "cd $module_calls ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1135
[475]	1136	fi
[1]	1137
[475]	1138	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
	1139	then
	1140	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
	1141	if [[ $silent = false ]]
[40]	1142	then
[475]	1143	answer=dummy
	1144	printf "\n"
	1145	while [[ "$answer" != c && "$answer" != k ]]
[40]	1146	do
[475]	1147	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
	1148	read answer
	1149	if [[ "$answer" = l ]]
	1150	then
	1151	more ${remote_host}_last_make_protokoll
	1152	fi
[40]	1153	done
[475]	1154	if [[ $answer = k ]]
[40]	1155	then
[475]	1156	locat=user_abort; exit
[1]	1157	fi
	1158	fi
[475]	1159	fi
[1]	1160
	1161
	1162
[475]	1163	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
	1164	printf "\n *** tar update on remote host ..."
	1165	if [[ $remote_host != lctit ]]
	1166	then
	1167	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod"
	1168	else
	1169	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	1170	# MIT SSH, DESHALB AUFRUF PER PIPE
	1171	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
	1172	fi
[1]	1173
	1174
[475]	1175	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
	1176	# printf "\n *** \"make clean\" on remote host ..."
	1177	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
	1178	# printf "\n"
[1]	1179
	1180
[25]	1181
	1182
[475]	1183	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
	1184	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	1185	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
	1186	elif [[ $compile_utility_programs = true ]]
	1187	then
	1188
	1189	printf "\n\n"
	1190	echo " *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
	1191	cd ${local_source_path}/../SCRIPTS
	1192
	1193	if [[ $remote_host != lctit ]]
[22]	1194	then
[475]	1195	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
	1196	else
[503]	1197	# TIT ERLAUBT NUR DIE AUSFUEHRUNG GANZ BESTIMMTER KOMMANDOS
[475]	1198	# MIT SSH, DESHALB AUFRUF PER PIPE
	1199	print "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_addres} 2>&1
	1200	fi
[22]	1201
[475]	1202	# KOPIEREN DER SCRIPTE
	1203	if [[ $local_host = decalpha ]]
	1204	then
[503]	1205	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTAENDIGEN PFADES
[475]	1206	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1207	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1208	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
	1209	/bin/scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
	1210	else
	1211	scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
	1212	fi
[22]	1213
[475]	1214	cd - > /dev/null
	1215	cd ${local_source_path}/../UTIL
[22]	1216
[27]	1217
[475]	1218	# KOPIEREN DER UTILITY-PROGRAMME
	1219	if [[ $local_host = decalpha ]]
	1220	then
	1221	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
	1222	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1223	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1224	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
	1225	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
	1226	else
	1227	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
	1228	fi
[27]	1229
	1230
[22]	1231
[475]	1232	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1233	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
	1234	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
	1235	# Z.B. DIE PFADE ZUM COMPILER)
	1236	echo " *** execute \"make\" on remote host"
[22]	1237
[475]	1238	if [[ $remote_host = nech ]]
	1239	then
[503]	1240	make_call_string="sxmake $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
[475]	1241	else
[503]	1242	make_call_string="make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
[475]	1243	fi
[22]	1244
[493]	1245	# generate command to load modules, if modules are given
	1246	if [[ "$modules" != "" ]]
	1247	then
[678]	1248	if [[ $remote_host = lctit ]]
	1249	then
	1250	module_calls=". $modules"
	1251	else
	1252	module_calls="module load ${modules};"
	1253	fi
[562]	1254
	1255	# bugfix for wrong netcdf module
	1256	if [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
	1257	then
	1258	if [[ $(echo $module_calls \| grep -c netcdf/3.6.3-intel) != 0 ]]
	1259	then
	1260	module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
	1261	fi
	1262	fi
[503]	1263	else
	1264	module_calls=""
[493]	1265	fi
	1266
[475]	1267	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
	1268	then
[22]	1269
[493]	1270	ssh ${remote_username}@${remote_addres} "$module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
[22]	1271
[475]	1272	elif [[ $remote_host = ibmh ]]
	1273	then
[22]	1274
[493]	1275	print "$module_calls export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres}
[22]	1276
[475]	1277	elif [[ $remote_host = lctit ]]
	1278	then
[22]	1279
[475]	1280	echo " " > ${remote_host}_last_make_protokoll
	1281	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
	1282	do
[493]	1283	print "$module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[475]	1284	done
[22]	1285
[475]	1286	elif [[ $remote_host = lcxt4 ]]
	1287	then
[22]	1288
[691]	1289	ssh ${remote_username}@${remote_addres} ". /opt/modules/default/init/ksh; $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
[22]	1290
[475]	1291	else
[407]	1292
[493]	1293	print "$module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[407]	1294
[475]	1295	fi
[22]	1296
[475]	1297	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
[22]	1298
[475]	1299	rm -rf ${remote_host}_last_make_protokoll
[22]	1300
[475]	1301	# make on local host
	1302	else
[22]	1303
[544]	1304	# workaround for lcxt4
	1305	if [[ $remote_host = lcxt4 ]]
	1306	then
	1307	. /opt/modules/default/init/ksh
	1308	fi
	1309
	1310	# first load modules, if given
	1311	if [[ "$modules" != "" ]]
	1312	then
[678]	1313	if [[ $remote_host = lctit ]]
	1314	then
	1315	. $modules
	1316	else
	1317	module load ${modules}
	1318	fi
[544]	1319	fi
	1320
	1321
[475]	1322	if [[ $compile_utility_programs = false ]]
	1323	then
[22]	1324
[475]	1325	# DEPOSITORY VERZEICHNIS ERZEUGEN, FALLS NOCH NICHT VORHANDEN
	1326	eval remote_md=$remote_md
	1327	if [[ ! -d $remote_md ]]
[40]	1328	then
[475]	1329	if mkdir $remote_md
[215]	1330	then
[475]	1331	printf "\n\n *** directory for make depository:"
	1332	printf "\n $remote_md"
	1333	printf "\n was created\n"
	1334	else
	1335	printf "\n +++ directory for make depository:"
	1336	printf "\n $remote_md"
	1337	printf "\n cannot be created"
	1338	locat=local_depository_path; exit
[215]	1339	fi
[475]	1340	fi
[215]	1341
[475]	1342	# QUELLTEXT-DATEIEN AUS REPOSITORY INS DEPOSITORY KOPIEREN
	1343	echo " "
	1344	echo " *** updating sources in $remote_md"
	1345	cd $remote_md
	1346	cp $local_source_path/${mainprog}_sources.tar .
	1347	tar xf ${mainprog}_sources.tar
[215]	1348
[475]	1349	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
	1350	echo " "
	1351	echo " *** execute \"make\" on local host"
[1]	1352
[475]	1353	make $make_options PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
[40]	1354
[475]	1355	if [[ $? != 0 ]]
	1356	then
	1357	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
	1358	if [[ $silent = false ]]
[1]	1359	then
[475]	1360	answer=dummy
	1361	printf "\n"
	1362	while [[ "$answer" != c && "$answer" != k ]]
	1363	do
	1364	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
	1365	read answer
	1366	if [[ "$answer" = l ]]
[1]	1367	then
[475]	1368	more ${remote_host}_last_make_protokoll
[1]	1369	fi
[475]	1370	done
	1371	if [[ $answer = k ]]
	1372	then
	1373	locat=user_abort; exit
[1]	1374	fi
	1375	fi
[475]	1376	fi
[1]	1377
	1378
[503]	1379	# TAR NEW VERSION ON LOCAL HOST
[475]	1380	printf "\n *** tar update on local host ..."
	1381	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
[1]	1382
[22]	1383
[475]	1384	# COMPILE THE UTILITY PROGRAMS
	1385	elif [[ $compile_utility_programs = true ]]
	1386	then
	1387	printf "\n\n"
	1388	echo " *** compiling the utility programs ..."
	1389	cd ${local_source_path}/../UTIL
[503]	1390
	1391	# TOUCH FILES IN ORDER TO FORCE COMPILATION FOR EVERY BLOCK
	1392	touch *.f90
	1393	make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
[793]	1394
[807]	1395	# CHECK IF QMAKE IS AVAILABLE AND COMPILE MRUNGUI
[811]	1396	if [[ $util_compiled_localhost == false ]]
	1397	then
	1398	printf "\n\n"
	1399	echo " *** compiling the mrun GUI"
	1400	if which qmake >/dev/null; then
	1401	cd mrungui
	1402	touch *
	1403	qmake
	1404	make
	1405	make clean
	1406	rm Makefile
	1407	cd ..
	1408	else
	1409	echo " +++ no qmake found. The (optional) GUI will not be compiled."
	1410	fi
[793]	1411
[811]	1412	# COMPILE CHECK_NAMELIST_FILES (ONLY FOR ONE BRANCH on LOCALHOST NEEDED)
[793]	1413
[811]	1414	printf "\n\n"
	1415	echo " *** compiling check_namelist_files ..."
[807]	1416
[811]	1417	check_depository_path=${local_source_path}/../UTIL
	1418	cd $check_depository_path
	1419	mkdir check_tmp
	1420	cp ${local_source_path}/${mainprog}_sources_check.tar ./check_tmp
	1421	cd check_tmp
	1422	tar -xf ${mainprog}_sources_check.tar
	1423	rm -rf ${mainprog}_sources_check.tar
[807]	1424
[818]	1425	copts_check="-cpp -D__parallel -D__check"
[811]	1426	make -f Makefile_check $make_options F90=$compiler_name_ser COPT="$copts_check"
[807]	1427
[811]	1428	tar -cf check_namelist_files.tar Makefile_check check_namelist_files.x .f90 .o *.mod
	1429	mv check_namelist_files.tar $check_depository_path
	1430	mv check_namelist_files.x $PALM_BIN
	1431	cd $check_depository_path
	1432	rm -rf check_tmp
	1433	util_compiled_localhost=true
	1434	else
	1435	cd $check_depository_path
	1436	printf "\n\n"
[818]	1437	echo " *** skipped compilation of mrun GUI."
[811]	1438	printf "\n\n"
	1439	echo " *** skipped compilation of check_namelist_files."
	1440	fi
	1441
[1]	1442	fi
	1443	fi
	1444	done
	1445
	1446
	1447	if [[ $host_found = false ]]
	1448	then
	1449	if [[ $host = all ]]
	1450	then
	1451	printf "\n +++ no hosts found in configuration file"
	1452	else
	1453	printf "\n +++ host \"$host\" not found in configuration file"
	1454	fi
	1455	locat=config_file; exit
	1456	fi
	1457
	1458
	1459
[503]	1460	# FINAL WORK
[1]	1461	rm -f hosts_found_in_config_file
[811]	1462	rm -f ${local_source_path}/${mainprog}_sources_check.tar
[1]	1463

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |