Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 811

Last change on this file since 811 was 811, checked in by maronga, 12 years ago
bugfix in mbuild (utility compilation), bugfix in mrungui
Property svn:keywords set to `Id Rev`
File size: 51.3 KB

Rev	Line
[1]	1	#!/bin/ksh
[503]	2	# mbuild - script for compiling the PALM code and its utility programs
[169]	3	# $Id: mbuild 811 2012-01-31 09:45:54Z maronga $
[1]	4
[503]	5	# Procedure to compile code on local and remote hosts using the
	6	# make-mechanism. The source code must be provided on the local host.
[1]	7
[503]	8	# Last changes:
	9	# 06/05/02 - Siggi - start development
	10	# 12/06/02 - Siggi - first version finished
	11	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) included
	12	# 19/12/02 - Siggi - ibmb included
[1]	13	# 05/02/03 - Siggi - hostname nobela included
	14	# 04/03/03 - Siggi - host nech included
	15	# 06/03/03 - Siggi - make_call_string is echoed without '' to
	16	# file LAST_MAKE_CALL (otherwise error on NEC, because
	17	# '' are part of compiler options
	18	# 16/03/03 - Siggi - Two underscores are placed in front of every define
	19	# string, in case that palm.f90 version contains
	20	# such strings
	21	# 16/04/03 - Siggi - First extensions for linux machines
	22	# 24/06/03 - Siggi - host orkan included
	23	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
	24	# 24/07/03 - Siggi - host maestro admitted
	25	# 06/08/03 - Siggi - host gregale admitted
	26	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
	27	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
	28	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
	29	# (-D$OMP=OMP) in order to avoid problems with
	30	# OMP_NUM_THREADS
	31	# 09/01/04 - Siggi - action above cancelled
	32	# 28/01/04 - Siggi - action above re-cancelled
	33	# 08/03/04 - Siggi - host scirocco admitted
	34	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
	35	# the respective .f90 file is not listed in the makefile
	36	# and deletion is demanded by the user
	37	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
	38	# due to error in ssh installation (otherwise a prompt
	39	# for the password appears)
	40	# 23/07/04 - Siggi - changes due to the new berni configuration
	41	# (federation switch)
	42	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
	43	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
	44	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
	45	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
	46	# 24/04/05 - Siggi - netcdf support on lcmuk
	47	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
	48	# 12/05/05 - Siggi - netcdf support on ibm
	49	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
	50	# 18/05/05 - Siggi - netcdf support on nec
	51	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
	52	# 23/05/05 - Siggi - netcdf support on ibms
	53	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
	54	# 30/06/05 - Siggi - netcdf support on bora
	55	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
	56	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
	57	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
	58	# host gfdl5 (ibmy) admitted
	59	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
	60	# 20/01/06 - Siggi - cpp directive for ibmy
	61	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
	62	# 10/02/06 - Siggi - modifications for scp on decalpha
	63	# 13/04/06 - Siggi - ostria admitted
	64	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
	65	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
	66	# 29/05/05 - Siggi - atmos (lcide) admitted
	67	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
	68	# 24/11/06 - Siggi - breva and levanto admitted
	69	# 07/02/07 - Siggi - adapted for RIAM (neck)
[5]	70	# 10/02/07 - Siggi - all hpmuk-related code removed
[40]	71	# 02/03/07 - Siggi - compilation of utility programs and transfer of
[27]	72	# scripts to remote hosts added (option -u)
[66]	73	# 14/03/07 - Siggi - fimm admitted, revision number added to terminal
	74	# output
[69]	75	# 16/03/07 - Siggi - adjustments (netcdf) for lctit
	76	# adjustments for running under pdksh, local ip-addres
	77	# is not determined any more
[82]	78	# 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
	79	# from configuration file
	80	# host identifier (local_host) is read from config file
[116]	81	# 10/10/07 - Siggi - bugfix: handling of comment lines
[181]	82	# 18/07/08 - Siggi - adapted for lcsgih
	83	# 21/07/08 - Siggi - mainprog (executable) is added to the tar-file
	84	# ({mainprog}_current_version)
[206]	85	# 02/10/08 - Siggi - adapted for lcxt4
[215]	86	# 14/11/08 - Siggi - update mechanism completely revised: source tarfile
	87	# remains in source directory, one depository per block
[266]	88	# (given in the config-file) is created, allways all
	89	# files from the source directory are copied to the
	90	# respective depository, no additional file checks are
	91	# done any more (version 2.1)
[224]	92	# 13/01/09 - Marcus- re-enable compilation more than once on lcmuk (as on
	93	# other machines)
[266]	94	# 21/03/09 - Siggi - -u copies also copies process_dvr_output and
	95	# .dvrserver.config
[305]	96	# 21/04/09 - Siggi - adjustments for new IBM at DKRZ, which is now ibmh
[367]	97	# 25/08/09 - BjornM- adapted for lck
[407]	98	# 01/12/09 - BjornM- re-adjustments for lcxt4
[437]	99	# 01/02/10 - Siggi - adjustments for lcxt5m
[475]	100	# 03/02/10 - Siggi - make options (mopts) to be set by configuration file
	101	# implemented, remoted mode option -r completely
	102	# removed, t3e related parts removed
[492]	103	# 26/02/10 - BjornM- re-adjustments for lcxt4 (new modules)
[493]	104	# 01/03/10 - Siggi - mpilib replaced by modules: explicit module settings
	105	# removed; modules should now be given in the
	106	# configuration file
[503]	107	# 02/03/10 - Siggi - utility programs are created separately for each
	108	# block in the configuration file,
	109	# parallel make for utility programs
[508]	110	# 12/03/10 - Siggi - bugfix: remode_md was given a wrong value
[544]	111	# 16/08/10 - BjornM- bugfix: call of modules on local host, new workaround
	112	# for lcxt4
[555]	113	# 07/09/10 - Siggi - bugfix for wrong netcdf/3.6.3 module on lcsgi
[622]	114	# 08/12/10 - Siggi - initialization of the module command changed for
	115	# SGI-ICE/lcsgi
	116	# adjustments for Kyushu Univ. (lcrte, ibmku)
[635]	117	# 14/12/10 - Siggi - adjustments for new Tsubame system at Tokyo
	118	# institute of technology (lctit)
[693]	119	# 04/03/11 - BjornM- re-adjustments for lcxt4
	120	# 06/03/11 - Siggi - adjustments for ibmkisti
[717]	121	# 03/04/11 - Micha - added lckordi
[740]	122	# 17/08/11 - Siggi - HLRN access via hicegate0 (130.75.4.101)
[784]	123	# 27/11/11 - Siggi - Bugfix for make options setting (-j)
[793]	124	# 12/12/11 - BjornM- added mrun GUI to ulitity programs
[807]	125	# 25/01/12 - BjornM- compilation of check_namelist_files (namelist file
	126	# check program) has been added to the utility branch),
	127	# modfified the compilation of mrungui
[811]	128	# 31/01/12 - BjornM- bugfix for compilation of utility programs on
	129	# multiple localhost branches
[1]	130
	131
[508]	132
[503]	133	# VARIABLE DECLARATIONS + DEFAULT VALUES
[22]	134	compile_utility_programs=false
[1]	135	config_file=.mrun.config
[67]	136	fimm=false
[1]	137	host=all
	138	host_found=false
	139	locat=normal
	140	makefile=""
[493]	141	module_calls=""
[811]	142	util_compiled_localhost=false
[1]	143	scirocco=false
	144	silent=false
	145	suf=f90
	146	update=false
[83]	147	working_directory=`pwd`
[1]	148
	149	typeset -i ih ihost=0
	150
[66]	151	typeset -R30 calltime
[1]	152	typeset -L20 column1
	153	typeset -L50 column2
	154	typeset -L70 column3
[215]	155	typeset -L40 version="MBUILD 2.1 Rev$Rev: 811 $"
[1]	156
[503]	157	# ERROR HANDLING
	158	# IN CASE OF EXIT:
[83]	159	trap 'rm -rf $working_directory/tmp_mbuild
[69]	160	if [[ $locat != normal ]]
[1]	161	then
	162	printf "\n\n +++ mbuild killed \n\n"
	163	else
	164	printf "\n\n *** mbuild finished \n\n"
	165	fi' exit
	166
	167
[503]	168	# IN CASE OF TERMINAL-BREAK:
[83]	169	trap 'rm -rf $working_directory/tmp_mbuild
[69]	170	printf "\n\n +++ mbuild killed by \"^C\" \n\n"
[1]	171	exit
	172	' 2
	173
	174
[215]	175	tmp_mbuild=${working_directory}/tmp_mbuild
[1]	176
[503]	177	# READ SHELLSCRIPT-OPTIONS
[475]	178	while getopts :c:h:m:s:u option
[1]	179	do
	180	case $option in
	181	(c) config_file=$OPTARG;;
	182	(h) host=$OPTARG;;
	183	(m) makefile=$OPTARG;;
	184	(s) suf=$OPTARG;;
[22]	185	(u) compile_utility_programs=true;;
[1]	186	(\?) printf "\n +++ unknown option $OPTARG \n";
	187	locat=parameter; exit;;
	188	esac
	189	done
	190
	191
	192
[503]	193	# CHECK, IF CONFIGURATION-FILE EXISTS
[82]	194	if [[ ! -f $config_file ]]
	195	then
	196	printf "\n +++ configuration file: "
	197	printf "\n $config_file"
	198	printf "\n does not exist"
	199	locat=configuration; exit
	200	fi
	201
	202
	203
[503]	204	# DETERMINE THE LOCAL HOST
[1]	205	local_host_real_name=$(hostname)
[69]	206	# local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
	207
[1]	208
[82]	209
[503]	210	# DETERMINE HOST-IDENTIFIER (local_host) FROM THE CONFIG-FILE
[82]	211	line=""
[215]	212	grep "%host_identifier" $config_file > $tmp_mbuild
[82]	213	while read line
	214	do
[116]	215	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
[82]	216	then
	217	HOSTNAME=`echo $line \| cut -d" " -s -f2`
	218	host_identifier=`echo $line \| cut -d" " -s -f3`
[83]	219	if [[ $local_host_real_name = $HOSTNAME ]]
[82]	220	then
	221	local_host=$host_identifier
	222	break
	223	fi
	224	fi
[215]	225	done < $tmp_mbuild
[82]	226
	227	if [[ "$local_host" = "" ]]
	228	then
	229	printf "\n +++ no host identifier found in configuration file \"$config_file\""
	230	printf "\n for local host \"$local_host_real_name\"."
	231	printf "\n Please add line"
	232	printf "\n \"\%host_identifier $local_host_real_name <identifier>\""
	233	printf "\n to the configuration file."
	234	locat=local_host; exit
	235	fi
	236
	237
	238
[1]	239	[[ $local_host_real_name = scirocco ]] && scirocco=true
[67]	240	[[ $local_host_real_name = fimm.bccs.uib.no ]] && fimm=true
[1]	241
	242
	243
	244	if [[ $local_host != ibms ]]
	245	then
	246	config_file=$PWD/$config_file
	247	else
	248	config_file=`pwd`/$config_file
	249	fi
	250
	251
	252
[503]	253	# DETERMINE USER NAME ON LOCAL HOST FROM THE CONFIG-FILE
[1]	254	line=""
[215]	255	grep " $local_host" $config_file \| grep "%remote_username" > $tmp_mbuild
[69]	256	while read line
[1]	257	do
[116]	258	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
[1]	259	then
	260	local_username=`echo $line \| cut -d" " -s -f2`
	261	fi
[215]	262	done < $tmp_mbuild
[1]	263
[82]	264
[1]	265	if [[ "$local_username" = "" ]]
	266	then
	267	printf "\n +++ no user name found in configuration file"
	268	printf "\n for local host \"$local_host\" "
	269	locat=config_file; exit
	270	fi
	271
	272
[503]	273	# DETERMINE LOCAL SOURCE-CODE PATH.
	274	# FIRST CHECK, IF A GLOBAL SOURCE-CODE PATH HAS BEEN DECLARED FOR ALL HOSTS.
	275	# THEREFORE, FIRST SET ALL GLOBAL VARIABLES DECLARED IN THE CONFIG-FILE,
	276	# BECAUSE THEY MAY BE USED AS PART OF THE PATH NAME.
[5]	277	line=""
[215]	278	grep "%" $config_file > $tmp_mbuild
[69]	279	while read line
[5]	280	do
[116]	281	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" && $(echo $line \| cut -c1) != "#" ]]
[1]	282	then
[5]	283	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
	284	value=`echo $line \| cut -d" " -s -f2`
[8]	285	eval export $var=\$value
[1]	286	fi
[215]	287	done < $tmp_mbuild
[1]	288
[503]	289	# NOW CHECK, IF A GLOBAL SOURCE-CODE-PATH HAS BEEN DECLARED
[1]	290	line=""
[215]	291	grep "%source_path" $config_file > $tmp_mbuild
[69]	292	while read line
[1]	293	do
	294	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	295	then
	296	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
	297	then
	298	global_source_path=`echo $line \| cut -d" " -s -f2`
	299	fi
	300	fi
[215]	301	done < $tmp_mbuild
[1]	302
	303	line=""
[215]	304	grep " $local_host" $config_file \| grep "%source_path" > $tmp_mbuild
[69]	305	while read line
[1]	306	do
	307	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	308	then
	309	local_source_path=`echo $line \| cut -d" " -s -f2`
	310	fi
[215]	311	done < $tmp_mbuild
[1]	312
	313	if [[ "$local_source_path" = "" ]]
	314	then
	315	if [[ "$global_source_path" != "" ]]
	316	then
	317	local_source_path=$global_source_path
	318	else
	319	printf "\n +++ no source path found in configuration file"
	320	printf "\n for local host \"$local_host\" "
	321	printf "\n please set \"\%source_path\" in configuration file"
	322	locat=config_file; exit
	323	fi
	324	fi
	325	eval local_source_path=$local_source_path
[8]	326	eval local_source_path=$local_source_path
[1]	327
	328
[215]	329
[503]	330	# DETERMINE GLOBAL DEPOSITORY-PATH
[1]	331	line=""
[215]	332	grep "%depository_path" $config_file > $tmp_mbuild
[69]	333	while read line
[1]	334	do
	335	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	336	then
	337	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
	338	then
	339	global_depository_path=`echo $line \| cut -d" " -s -f2`
	340	fi
	341	fi
[215]	342	done < $tmp_mbuild
[1]	343
[807]	344	if [[ $found = false ]]
	345	then
	346	printf "\n +++ no \%depository_path found in"
	347	printf "\n $config_file"
	348	locat=depository_path; exit
	349	fi
[1]	350
[503]	351	# CHECK, IF A MAIN PROGRAM HAS BEEN DEFINED IN THE CONFIG-FILE
[5]	352	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
	353	then
	354	printf "\n +++ no main program or more than one main program defined"
	355	printf "\n in configuration file"
	356	locat=configuration; exit
	357	else
	358	line=`grep "%mainprog" $config_file`
	359	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
	360	then
	361	printf "\n +++ no main program defined in configuration file"
	362	locat=configuration; exit
	363	fi
	364	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
	365	fi
	366
	367
	368
[503]	369	# CHECK IF MAKEFILE EXITS
[1]	370	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
	371	if [[ ! -f $makefile ]]
	372	then
	373	printf "\n +++ makefile: "
	374	printf "\n $makefile"
	375	printf "\n does not exist"
	376	locat=makefile; exit
	377	fi
	378
	379
[503]	380	# HEADER-OUTPUT (PART1: MESSAGES CONCERNING THE LOCAL HOST)
[1]	381	calltime=$(date)
	382	printf "\n"
	383	printf "#------------------------------------------------------------------------# \n"
	384	printf "\| $version$calltime \| \n"
	385	printf "\| \| \n"
	386	column1="called on:"; column2=$local_host_real_name
	387	printf "\| $column1$column2 \| \n"
	388	column1="local username:"; column2=$local_username
	389	printf "\| $column1$column2 \| \n"
	390	column1="local IP-addres:"; column2=$local_addres
	391	printf "\| $column1$column2 \| \n"
	392	column1="config file:"; column2=$config_file
	393	printf "\| $column1$column2 \| \n"
	394	column1="makefile:"; column2=$makefile
	395	printf "\| $column1$column2 \| \n"
	396	column1="local source path:"; column2=$local_source_path
	397	printf "\| $column1$column2 \| \n"
	398	printf "#------------------------------------------------------------------------# \n"
	399
	400	# printf "\| \| \n"
	401
	402
[40]	403	if [[ $compile_utility_programs = false ]]
	404	then
[1]	405
[503]	406	# IN ANY CASE, GIVE ALL FILES WRITE-PERMIT, IN ORDER TO AVOID PROBLEMS
	407	# WITH OVERWRITING FILES ON THE REMOTE HOST
[215]	408	cd $local_source_path
	409	printf "\n\n *** tar of makefile and source files in $local_source_path"
[40]	410	tar -cf ${mainprog}_sources.tar Makefile *.$suf
	411	printf "\n"
[1]	412
[807]	413	else
	414	cd $local_source_path
	415	printf "\n\n *** tar of makefile and source files in $local_source_path"
	416
	417	cat Makefile_check\|while read line
	418	do
	419	line=$(echo $line\|grep RCS)
	420	if [[ $line == "RCS" ]]
	421	then
	422	line=$(echo $line\|sed 's/RCS = //g')
	423	break
	424	fi
	425	done
	426
	427	tar -cf ${mainprog}_sources_check.tar Makefile_check $line
	428	printf "\n"
[40]	429	fi
[1]	430
	431
[40]	432
[503]	433	# GET CONFIRMATION TO CONTINUE
[1]	434	if [[ $host = all ]]
	435	then
	436	printf "\n *** updates will be made for ALL hosts found in"
	437	printf "\n the configuration file"
	438	else
	439	printf "\n *** update will be made for host \"$host\" "
	440	fi
	441
	442	if [[ $silent = false ]]
	443	then
	444	answer=dummy
	445	printf "\n\n"
	446	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
	447	do
	448	printf " >>> continue (y/n) ? "
	449	read answer
	450	done
	451	if [[ $answer = n \|\| $answer = N ]]
	452	then
	453	locat=user_abort; exit
	454	fi
	455	fi
	456
	457
	458
	459
	460	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
	461	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
	462	printf "\n *** scanning configuration file for host(s) ..."
	463
[215]	464	grep %fopts $config_file > $tmp_mbuild
[69]	465	while read line
[1]	466	do
	467	# KOMMENTARZEILEN UEBERSPRINGEN
	468	[[ $(echo $line \| cut -c1) = "#" ]] && continue
	469	(( ihost = ihost + 1 ))
	470	hostline[$ihost]="$line"
[215]	471	done < $tmp_mbuild
[1]	472
	473
	474	while (( ih < ihost ))
	475	do
	476
	477	(( ih = ih + 1 ))
	478
	479	# REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
	480	# NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
	481	# SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
	482	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
	483	remote_host=`echo $remote_host_string \| cut -d" " -f1`
	484	if [[ $host != all ]]
	485	then
	486	[[ $remote_host != $host ]] && continue
	487	fi
	488	host_found=true
	489	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
	490	if [[ $condition1 = $remote_host ]]
	491	then
	492	condition1=""
	493	else
	494	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
	495	fi
	496
[493]	497	modules=""
[82]	498	netcdf_inc=""
	499	netcdf_lib=""
[784]	500	make_options=""
[1]	501
	502	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
	503	case $remote_host in
[717]	504	(lckordi) remote_adress=210.219.61.8;;
[116]	505	(lcmuk) remote_addres=130.75.105.2;;
[622]	506	(lcrte) remote_addres=133.5.185.60;;
[181]	507	(lcsgib) remote_addres=130.73.232.102;;
[740]	508	(lcsgih) remote_addres=130.75.4.101;;
[367]	509	(lck) remote_addres=165.132.26.61;;
[635]	510	(lctit) remote_addres=10.1.6.170;;
[206]	511	(lcxt4) remote_addres=129.177.20.113;;
[437]	512	(lcxt5m) remote_addres=193.166.211.144;;
[83]	513	(decalpha) remote_addres=165.132.26.56;;
[305]	514	(ibmh) remote_addres=136.172.40.15;;
[693]	515	(ibmkisti) remote_addres=150.183.146.24;;
[622]	516	(ibmku) remote_addres=133.5.4.129;;
[83]	517	(ibms) remote_addres=150.183.5.101;;
	518	(ibmy) remote_addres=165.132.26.58;;
	519	(nech) remote_addres=136.172.44.192;;
	520	(neck) remote_addres=133.5.178.11;;
	521	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
	522	(*) if [[ $local_host != $remote_host ]]
[1]	523	then
[83]	524	printf "\n +++ remote host \"$remote_host\" unknown";
[503]	525	printf "\n please inform PALM group support!"
[1]	526	fi;;
	527	esac
	528
	529
	530	# REMOTE-USERNAMEN ERMITTELN
	531	line=""
[116]	532	found=false
[215]	533	grep "$remote_host_string" $config_file \| grep "%remote_username" > $tmp_mbuild
[69]	534	while read line1
[1]	535	do
[116]	536
[1]	537	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	538	then
	539	line="$line1"
	540	fi
[116]	541
	542	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	543	then
	544	remote_username=`echo $line \| cut -d" " -s -f2`
	545	found=true
	546	fi
	547
[215]	548	done < $tmp_mbuild
[1]	549
[116]	550	if [[ $found = false ]]
[1]	551	then
	552	printf "\n +++ no remote username found in configuration file"
	553	printf "\n for \"$remote_host_string\" "
	554	locat=config_file; exit
	555	fi
	556
	557
	558	# REMOTE-QUELLTEXTPFAD ERMITTELN
	559	line=""
[54]	560	remote_source_path=""
[215]	561	grep "$remote_host_string" $config_file \| grep "%source_path" > $tmp_mbuild
[69]	562	while read line1
[1]	563	do
[116]	564
[1]	565	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	566	then
	567	line="$line1"
	568	fi
[116]	569
	570	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	571	then
	572	remote_source_path=`echo $line \| cut -d" " -s -f2`
	573	fi
	574
[215]	575	done < $tmp_mbuild
[1]	576
	577	if [[ "$remote_source_path" = "" ]]
	578	then
	579	if [[ "$global_source_path" != "" ]]
	580	then
	581	remote_source_path=$global_source_path
	582	else
	583	printf "\n +++ no source path found in configuration file"
	584	printf "\n for \"$remote_host_string\" "
	585	locat=config_file; exit
	586	fi
	587	fi
	588
[22]	589	remote_ud=${remote_source_path}/../UTIL
[24]	590	remote_ud=$(eval echo $remote_ud)
[1]	591
[54]	592
[1]	593	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
[54]	594	remote_md=""
[1]	595	line=""
[215]	596	grep "$remote_host_string" $config_file \| grep "%depository_path" > $tmp_mbuild
[69]	597	while read line1
[1]	598	do
[116]	599
[1]	600	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	601	then
	602	line="$line1"
	603	fi
[116]	604
	605	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	606	then
	607	remote_md=`echo $line \| cut -d" " -s -f2`
	608	fi
	609
[215]	610	done < $tmp_mbuild
[1]	611
	612	if [[ "$remote_md" = "" ]]
	613	then
	614	if [[ "$global_depository_path" != "" ]]
	615	then
	616	remote_md=$global_depository_path
	617	else
	618	printf "\n +++ no depository path found in configuration file"
	619	printf "\n for \"$remote_host_string\" "
	620	printf "\n please set \"\%depository_path\" in configuration file"
	621	locat=config_file; exit
	622	fi
	623	fi
	624
[8]	625	remote_md=$(eval echo $remote_md)
[503]	626	block=""
	627	[[ "$condition1" != "" ]] && block=_$condition1
	628	[[ "$condition2" != "" ]] && block=${block}_$condition2
[508]	629	remote_md=${remote_md}$block
[1]	630
[8]	631
[1]	632	# COMPILERNAMEN ERMITTELN
	633	line=""
[116]	634	found=false
[215]	635	grep "$remote_host_string" $config_file \| grep "%compiler_name " > $tmp_mbuild
[69]	636	while read line1
[1]	637	do
[116]	638
[1]	639	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	640	then
	641	line="$line1"
	642	fi
[116]	643
	644	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	645	then
	646	compiler_name=`echo $line \| cut -d" " -s -f2`
	647	found=true
	648	fi
	649
[215]	650	done < $tmp_mbuild
[1]	651
[116]	652	if [[ $found = false ]]
[1]	653	then
	654	printf "\n +++ no compiler name found in configuration file"
	655	printf "\n for \"$remote_host_string\" "
	656	locat=config_file; exit
	657	fi
	658
	659
[27]	660	# BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
	661	# SERIELLER COMPILERNAME ERMITTELT WERDEN
	662	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
	663	then
	664	line=""
[116]	665	found=false
[215]	666	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" > $tmp_mbuild
[69]	667	while read line1
[27]	668	do
[116]	669
[27]	670	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	671	then
	672	line="$line1"
	673	fi
[116]	674
	675	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	676	then
	677	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
	678	found=true
	679	fi
	680
[215]	681	done < $tmp_mbuild
[1]	682
[116]	683	if [[ $found = false ]]
[27]	684	then
[28]	685	printf "\n +++ no serial compiler name found in configuration file"
[27]	686	printf "\n for \"$remote_host_string\" "
	687	locat=config_file; exit
	688	fi
	689	else
	690	compiler_name_ser=$compiler_name
	691	fi
	692
	693
	694
[82]	695	# PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
	696	line=""
[116]	697	found=false
[215]	698	grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
[82]	699	while read line1
	700	do
[116]	701
[82]	702	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	703	then
	704	line="$line1"
	705	fi
[116]	706
	707	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	708	then
	709	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	710	cpp_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	711	found=true
	712	fi
	713
[215]	714	done < $tmp_mbuild
[116]	715
	716	if [[ $found = false ]]
[82]	717	then
	718	printf "\n +++ no preprocessor options found in configuration file"
	719	printf "\n for \"$remote_host_string\" "
	720	locat=config_file; exit
	721	fi
	722
[116]	723
[82]	724	# RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
	725	for string in $remote_host_string
	726	do
	727	if [[ $(echo $remote_host \| cut -c1-2) = lc && $(echo $string \| cut -c1-2) = lc ]]
	728	then
	729	cpp_options="$cpp_options -D__lc "
[83]	730	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $(echo $string \| cut -c1-3) = ibm ]]
	731	then
	732	cpp_options="${cpp_options},-D__ibm"
	733	elif [[ $(echo $remote_host \| cut -c1-3) = nec && $(echo $string \| cut -c1-3) = nec ]]
	734	then
	735	cpp_options="${cpp_options} -D__nec"
[82]	736	else
[83]	737	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
	738	then
	739	cpp_options="${cpp_options},-D__$string"
	740	else
	741	cpp_options="$cpp_options -D__$string "
	742	fi
[82]	743	fi
	744	done
	745
	746
	747
	748	# NETCDF-OPTIONEN ERMITTELN
	749	line=""
[215]	750	grep "$remote_host_string" $config_file \| grep "%netcdf_inc" > $tmp_mbuild
[82]	751	while read line1
	752	do
[116]	753
[82]	754	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	755	then
	756	line="$line1"
	757	fi
[116]	758
	759	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	760	then
	761	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	762	netcdf_inc=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	763	fi
	764
[215]	765	done < $tmp_mbuild
[82]	766
	767	line=""
[215]	768	grep "$remote_host_string" $config_file \| grep "%netcdf_lib" > $tmp_mbuild
[82]	769	while read line1
	770	do
[116]	771
[82]	772	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	773	then
	774	line="$line1"
	775	fi
[116]	776
	777	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	778	then
	779	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	780	netcdf_lib=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	781	fi
	782
[215]	783	done < $tmp_mbuild
[82]	784
	785
	786
[475]	787	# get make options
	788	line=""
	789	found=false
	790	grep "$remote_host_string" $config_file \| grep "%mopts" > $tmp_mbuild
	791	while read line1
	792	do
	793
	794	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	795	then
	796	line="$line1"
	797	fi
	798
	799	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	800	then
	801	# remove colons from directive string
	802	make_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	803
	804	fi
	805
	806	done < $tmp_mbuild
	807
	808
	809
[1]	810	# COMPILEROPTIONEN ERMITTELN
	811	line=""
[116]	812	found=false
[215]	813	grep "$remote_host_string" $config_file \| grep "%fopts" > $tmp_mbuild
[69]	814	while read line1
[1]	815	do
[116]	816
[1]	817	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	818	then
	819	line="$line1"
	820	fi
[116]	821
	822	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	823	then
	824	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	825	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	826	found=true
	827
	828	# NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
	829	compiler_options="$compiler_options $netcdf_inc"
	830	fi
	831
[215]	832	done < $tmp_mbuild
[116]	833
	834	if [[ $found = false ]]
[1]	835	then
	836	printf "\n +++ no compiler options found in configuration file"
	837	printf "\n for \"$remote_host_string\" "
	838	locat=config_file; exit
	839	fi
[82]	840
[1]	841
	842
[503]	843	# get modules to be loaded
[221]	844	line=""
[493]	845	grep "$remote_host_string" $config_file \| grep "%modules" > $tmp_mbuild
[221]	846	while read line1
	847	do
	848
	849	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	850	then
	851	line="$line1"
	852	fi
	853
	854	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	855	then
	856	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
[493]	857	modules=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
[221]	858	fi
	859
	860	done < $tmp_mbuild
	861
	862
	863
	864
[1]	865	# LADER-OPTIONEN ERMITTELN
	866	line=""
[116]	867	found=false
[215]	868	grep "$remote_host_string" $config_file \| grep "%lopts" > $tmp_mbuild
[69]	869	while read line1
[1]	870	do
[116]	871
[1]	872	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	873	then
	874	line="$line1"
	875	fi
[116]	876
	877	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	878	then
	879	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	880	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	881	found=true
	882
	883	# NETCDF-LIBRARY HINZUFUEGEN
	884	loader_options="$loader_options $netcdf_lib"
	885	fi
	886
[215]	887	done < $tmp_mbuild
[1]	888
[116]	889	if [[ $found = false ]]
[1]	890	then
	891	printf "\n +++ no loader options found in configuration file"
	892	printf "\n for \"$remote_host_string\" "
	893	locat=config_file; exit
	894	fi
[82]	895
[1]	896
	897	printf "\n\n#------------------------------------------------------------------------# \n"
	898	if [[ $remote_host = $local_host ]]
	899	then
	900	column1="remote_host:"; column2="$remote_host (= local host!)"
	901	else
	902	column1="remote_host:"; column2=$remote_host
	903	fi
	904	printf "\| $column1$column2 \| \n"
	905	printf "\| \| \n"
	906	column1="conditions:"; column2="$condition1 $condition2"
	907	printf "\| $column1$column2 \| \n"
	908	column1="make depository:"; column2=$remote_md
	909	printf "\| $column1$column2 \| \n"
[215]	910	line=$(echo "$remote_md" \| cut -c51-)
	911	while [[ "$line" != "" ]]
	912	do
	913	column1=""
	914	column2=$line
	915	printf "\| $column1$column2 \| \n"
	916	line=$(echo "$line" \| cut -c51-)
	917	done
[25]	918	if [[ $compile_utility_programs = true ]]
	919	then
	920	column1="utility directory:"; column2=$remote_ud
	921	printf "\| $column1$column2 \| \n"
	922	fi
[1]	923	column1="username:"; column2=$remote_username
	924	printf "\| $column1$column2 \| \n"
	925	column1="addres:"; column2=$remote_addres
	926	printf "\| $column1$column2 \| \n"
	927	column1="compiler:"; column2=$compiler_name
	928	printf "\| $column1$column2 \| \n"
[28]	929	if [[ $compile_utility_programs = true ]]
	930	then
	931	column1="serial compiler:"; column2=$compiler_name_ser
	932	printf "\| $column1$column2 \| \n"
	933	fi
[475]	934	if [[ "$make_options" != "" ]]
	935	then
	936	column1="make options:"; column2=$make_options
	937	printf "\| $column1$column2 \| \n"
	938	fi
[1]	939	column1="cpp options:"; column2=$cpp_options
	940	printf "\| $column1$column2 \| \n"
	941	line=$(echo "$cpp_options" \| cut -c51-)
	942	while [[ "$line" != "" ]]
	943	do
	944	column1=""
	945	column2=$line
	946	printf "\| $column1$column2 \| \n"
	947	line=$(echo "$line" \| cut -c51-)
	948	done
	949	column1="compiler options:"; column2=$compiler_options
	950	printf "\| $column1$column2 \| \n"
	951	line=$(echo "$compiler_options" \| cut -c51-)
	952	while [[ "$line" != "" ]]
	953	do
	954	column1=""
	955	column2=$line
	956	printf "\| $column1$column2 \| \n"
	957	line=$(echo "$line" \| cut -c51-)
	958	done
	959	column1="loader options:"; column2=$loader_options
	960	printf "\| $column1$column2 \| \n"
	961	line=$(echo "$loader_options" \| cut -c51-)
	962	while [[ "$line" != "" ]]
	963	do
	964	column1=""
	965	column2=$line
	966	printf "\| $column1$column2 \| \n"
	967	line=$(echo "$line" \| cut -c51-)
	968	done
[493]	969	if [[ $modules != "" ]]
	970	then
	971	column1="modules to be load:"; column2=$modules
	972	printf "\| $column1$column2 \| \n"
	973	line=$(echo "$modules" \| cut -c51-)
	974	while [[ "$line" != "" ]]
	975	do
	976	column1=""
	977	column2=$line
	978	printf "\| $column1$column2 \| \n"
	979	line=$(echo "$line" \| cut -c51-)
	980	done
	981	fi
[1]	982	printf "#------------------------------------------------------------------------# \n"
	983
	984	if [[ $silent = false ]]
	985	then
	986	answer=dummy
	987	printf "\n\n"
	988	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
	989	do
	990	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
	991	read answer
	992	done
	993	if [[ $answer = a \|\| $answer = A ]]
	994	then
	995	locat=user_abort; exit
	996	fi
	997	if [[ $answer = c \|\| $answer = C ]]
	998	then
[503]	999	silent=true
[1]	1000	fi
	1001	if [[ $answer = s \|\| $answer = S ]]
	1002	then
	1003	continue
	1004	fi
	1005	fi
	1006
	1007
[475]	1008	# make on remote host
	1009	if [[ $remote_host != $local_host ]]
[1]	1010	then
	1011
[475]	1012	if [[ $compile_utility_programs = false ]]
[1]	1013	then
	1014
[475]	1015	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	1016	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
	1017	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
	1018	if [[ $remote_host != lctit ]]
	1019	then
	1020	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
	1021	else
	1022	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	1023	# MIT SSH, DESHALB AUFRUF PER PIPE
	1024	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
	1025	fi
	1026	if [[ $local_host = decalpha ]]
	1027	then
	1028	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
	1029	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1030	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1031	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
	1032	/bin/scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
	1033	else
	1034	scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
	1035	fi
[1]	1036
	1037
	1038
[475]	1039	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
	1040	echo " *** untar previous update on remote host, if existing"
	1041	if [[ $remote_host != lctit ]]
	1042	then
	1043	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
	1044	else
	1045	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	1046	# MIT SSH, DESHALB AUFRUF PER PIPE
	1047	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
	1048	fi
[1]	1049
	1050
[475]	1051	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
	1052	echo " *** untar actual sources on remote host"
	1053	if [[ $remote_host != lctit ]]
	1054	then
	1055	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
	1056	else
	1057	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	1058	# MIT SSH, DESHALB AUFRUF PER PIPE
	1059	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
	1060	fi
[1]	1061
	1062
[475]	1063	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1064	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
	1065	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
	1066	# Z.B. DIE PFADE ZUM COMPILER)
	1067	echo " *** execute \"make\" on remote host"
[1]	1068
[493]	1069
	1070	# generate make call with make options
[475]	1071	if [[ $remote_host = nech ]]
	1072	then
	1073	make_call_string="sxmake $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1074	else
	1075	make_call_string="make $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1076	fi
[1]	1077
[493]	1078	# generate command to load modules, if modules are given
	1079	if [[ "$modules" != "" ]]
	1080	then
[678]	1081	if [[ $remote_host = lctit ]]
	1082	then
	1083	module_calls=". $modules"
	1084	else
	1085	module_calls="module load ${modules};"
	1086	fi
[555]	1087
	1088	# bugfix for wrong netcdf module
	1089	if [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
	1090	then
	1091	if [[ $(echo $module_calls \| grep -c netcdf/3.6.3-intel) != 0 ]]
	1092	then
	1093	module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
	1094	fi
	1095	fi
[503]	1096	else
	1097	module_calls=""
[493]	1098	fi
	1099
[693]	1100	if [[ $remote_host = ibmkisti \|\| $remote_host = ibms \|\| $remote_host = ibmy ]]
[475]	1101	then
[1]	1102
[493]	1103	ssh ${remote_username}@${remote_addres} "$module_calls cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1104
[475]	1105	elif [[ $remote_host = ibmh ]]
	1106	then
[1]	1107
[493]	1108	print "$module_calls export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1109
[475]	1110	elif [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
	1111	then
[1]	1112
[622]	1113	# print ". /usr/share/modules/init/bash; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1114	print "eval \`/sw/swdist/bin/modulesinit\`; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1115
[475]	1116	elif [[ $remote_host = lctit ]]
	1117	then
[1]	1118
[475]	1119	echo " " > ${remote_host}_last_make_protokoll
	1120	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
	1121	do
	1122	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1123	done
[1]	1124
[475]	1125	elif [[ $remote_host = lcxt4 ]]
[1]	1126	then
	1127
[691]	1128	ssh ${remote_username}@${remote_addres} ". /opt/modules/default/init/ksh; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1129
[475]	1130	else
[1]	1131
[493]	1132	print "cd $module_calls ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1133
[475]	1134	fi
[1]	1135
[475]	1136	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
	1137	then
	1138	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
	1139	if [[ $silent = false ]]
[40]	1140	then
[475]	1141	answer=dummy
	1142	printf "\n"
	1143	while [[ "$answer" != c && "$answer" != k ]]
[40]	1144	do
[475]	1145	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
	1146	read answer
	1147	if [[ "$answer" = l ]]
	1148	then
	1149	more ${remote_host}_last_make_protokoll
	1150	fi
[40]	1151	done
[475]	1152	if [[ $answer = k ]]
[40]	1153	then
[475]	1154	locat=user_abort; exit
[1]	1155	fi
	1156	fi
[475]	1157	fi
[1]	1158
	1159
	1160
[475]	1161	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
	1162	printf "\n *** tar update on remote host ..."
	1163	if [[ $remote_host != lctit ]]
	1164	then
	1165	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod"
	1166	else
	1167	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	1168	# MIT SSH, DESHALB AUFRUF PER PIPE
	1169	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
	1170	fi
[1]	1171
	1172
[475]	1173	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
	1174	# printf "\n *** \"make clean\" on remote host ..."
	1175	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
	1176	# printf "\n"
[1]	1177
	1178
[25]	1179
	1180
[475]	1181	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
	1182	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	1183	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
	1184	elif [[ $compile_utility_programs = true ]]
	1185	then
	1186
	1187	printf "\n\n"
	1188	echo " *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
	1189	cd ${local_source_path}/../SCRIPTS
	1190
	1191	if [[ $remote_host != lctit ]]
[22]	1192	then
[475]	1193	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
	1194	else
[503]	1195	# TIT ERLAUBT NUR DIE AUSFUEHRUNG GANZ BESTIMMTER KOMMANDOS
[475]	1196	# MIT SSH, DESHALB AUFRUF PER PIPE
	1197	print "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_addres} 2>&1
	1198	fi
[22]	1199
[475]	1200	# KOPIEREN DER SCRIPTE
	1201	if [[ $local_host = decalpha ]]
	1202	then
[503]	1203	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTAENDIGEN PFADES
[475]	1204	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1205	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1206	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
	1207	/bin/scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
	1208	else
	1209	scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
	1210	fi
[22]	1211
[475]	1212	cd - > /dev/null
	1213	cd ${local_source_path}/../UTIL
[22]	1214
[27]	1215
[475]	1216	# KOPIEREN DER UTILITY-PROGRAMME
	1217	if [[ $local_host = decalpha ]]
	1218	then
	1219	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
	1220	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1221	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1222	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
	1223	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
	1224	else
	1225	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
	1226	fi
[27]	1227
	1228
[22]	1229
[475]	1230	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1231	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
	1232	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
	1233	# Z.B. DIE PFADE ZUM COMPILER)
	1234	echo " *** execute \"make\" on remote host"
[22]	1235
[475]	1236	if [[ $remote_host = nech ]]
	1237	then
[503]	1238	make_call_string="sxmake $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
[475]	1239	else
[503]	1240	make_call_string="make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
[475]	1241	fi
[22]	1242
[493]	1243	# generate command to load modules, if modules are given
	1244	if [[ "$modules" != "" ]]
	1245	then
[678]	1246	if [[ $remote_host = lctit ]]
	1247	then
	1248	module_calls=". $modules"
	1249	else
	1250	module_calls="module load ${modules};"
	1251	fi
[562]	1252
	1253	# bugfix for wrong netcdf module
	1254	if [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
	1255	then
	1256	if [[ $(echo $module_calls \| grep -c netcdf/3.6.3-intel) != 0 ]]
	1257	then
	1258	module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
	1259	fi
	1260	fi
[503]	1261	else
	1262	module_calls=""
[493]	1263	fi
	1264
[475]	1265	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
	1266	then
[22]	1267
[493]	1268	ssh ${remote_username}@${remote_addres} "$module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
[22]	1269
[475]	1270	elif [[ $remote_host = ibmh ]]
	1271	then
[22]	1272
[493]	1273	print "$module_calls export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres}
[22]	1274
[475]	1275	elif [[ $remote_host = lctit ]]
	1276	then
[22]	1277
[475]	1278	echo " " > ${remote_host}_last_make_protokoll
	1279	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
	1280	do
[493]	1281	print "$module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[475]	1282	done
[22]	1283
[475]	1284	elif [[ $remote_host = lcxt4 ]]
	1285	then
[22]	1286
[691]	1287	ssh ${remote_username}@${remote_addres} ". /opt/modules/default/init/ksh; $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
[22]	1288
[475]	1289	else
[407]	1290
[493]	1291	print "$module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[407]	1292
[475]	1293	fi
[22]	1294
[475]	1295	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
[22]	1296
[475]	1297	rm -rf ${remote_host}_last_make_protokoll
[22]	1298
[475]	1299	# make on local host
	1300	else
[22]	1301
[544]	1302	# workaround for lcxt4
	1303	if [[ $remote_host = lcxt4 ]]
	1304	then
	1305	. /opt/modules/default/init/ksh
	1306	fi
	1307
	1308	# first load modules, if given
	1309	if [[ "$modules" != "" ]]
	1310	then
[678]	1311	if [[ $remote_host = lctit ]]
	1312	then
	1313	. $modules
	1314	else
	1315	module load ${modules}
	1316	fi
[544]	1317	fi
	1318
	1319
[475]	1320	if [[ $compile_utility_programs = false ]]
	1321	then
[22]	1322
[475]	1323	# DEPOSITORY VERZEICHNIS ERZEUGEN, FALLS NOCH NICHT VORHANDEN
	1324	eval remote_md=$remote_md
	1325	if [[ ! -d $remote_md ]]
[40]	1326	then
[475]	1327	if mkdir $remote_md
[215]	1328	then
[475]	1329	printf "\n\n *** directory for make depository:"
	1330	printf "\n $remote_md"
	1331	printf "\n was created\n"
	1332	else
	1333	printf "\n +++ directory for make depository:"
	1334	printf "\n $remote_md"
	1335	printf "\n cannot be created"
	1336	locat=local_depository_path; exit
[215]	1337	fi
[475]	1338	fi
[215]	1339
[475]	1340	# QUELLTEXT-DATEIEN AUS REPOSITORY INS DEPOSITORY KOPIEREN
	1341	echo " "
	1342	echo " *** updating sources in $remote_md"
	1343	cd $remote_md
	1344	cp $local_source_path/${mainprog}_sources.tar .
	1345	tar xf ${mainprog}_sources.tar
[215]	1346
[475]	1347	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
	1348	echo " "
	1349	echo " *** execute \"make\" on local host"
[1]	1350
[475]	1351	make $make_options PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
[40]	1352
[475]	1353	if [[ $? != 0 ]]
	1354	then
	1355	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
	1356	if [[ $silent = false ]]
[1]	1357	then
[475]	1358	answer=dummy
	1359	printf "\n"
	1360	while [[ "$answer" != c && "$answer" != k ]]
	1361	do
	1362	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
	1363	read answer
	1364	if [[ "$answer" = l ]]
[1]	1365	then
[475]	1366	more ${remote_host}_last_make_protokoll
[1]	1367	fi
[475]	1368	done
	1369	if [[ $answer = k ]]
	1370	then
	1371	locat=user_abort; exit
[1]	1372	fi
	1373	fi
[475]	1374	fi
[1]	1375
	1376
[503]	1377	# TAR NEW VERSION ON LOCAL HOST
[475]	1378	printf "\n *** tar update on local host ..."
	1379	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
[1]	1380
[22]	1381
[475]	1382	# COMPILE THE UTILITY PROGRAMS
	1383	elif [[ $compile_utility_programs = true ]]
	1384	then
	1385	printf "\n\n"
	1386	echo " *** compiling the utility programs ..."
	1387	cd ${local_source_path}/../UTIL
[503]	1388
	1389	# TOUCH FILES IN ORDER TO FORCE COMPILATION FOR EVERY BLOCK
	1390	touch *.f90
	1391	make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
[793]	1392
[807]	1393	# CHECK IF QMAKE IS AVAILABLE AND COMPILE MRUNGUI
[811]	1394	if [[ $util_compiled_localhost == false ]]
	1395	then
	1396	printf "\n\n"
	1397	echo " *** compiling the mrun GUI"
	1398	if which qmake >/dev/null; then
	1399	cd mrungui
	1400	touch *
	1401	qmake
	1402	make
	1403	make clean
	1404	rm Makefile
	1405	cd ..
	1406	else
	1407	echo " +++ no qmake found. The (optional) GUI will not be compiled."
	1408	fi
[793]	1409
[811]	1410	# COMPILE CHECK_NAMELIST_FILES (ONLY FOR ONE BRANCH on LOCALHOST NEEDED)
[793]	1411
[811]	1412	printf "\n\n"
	1413	echo " *** compiling check_namelist_files ..."
[807]	1414
[811]	1415	check_depository_path=${local_source_path}/../UTIL
	1416	cd $check_depository_path
	1417	mkdir check_tmp
	1418	cp ${local_source_path}/${mainprog}_sources_check.tar ./check_tmp
	1419	cd check_tmp
	1420	tar -xf ${mainprog}_sources_check.tar
	1421	rm -rf ${mainprog}_sources_check.tar
[807]	1422
[811]	1423	copts_check="-cpp -D_parallel -D__check"
	1424	make -f Makefile_check $make_options F90=$compiler_name_ser COPT="$copts_check"
[807]	1425
[811]	1426	tar -cf check_namelist_files.tar Makefile_check check_namelist_files.x .f90 .o *.mod
	1427	mv check_namelist_files.tar $check_depository_path
	1428	mv check_namelist_files.x $PALM_BIN
	1429	cd $check_depository_path
	1430	rm -rf check_tmp
	1431	util_compiled_localhost=true
	1432	else
	1433	cd $check_depository_path
	1434	printf "\n\n"
	1435	echo " *** skipped compilation of mrun GUI (already."
	1436	printf "\n\n"
	1437	echo " *** skipped compilation of check_namelist_files."
	1438	fi
	1439
[1]	1440	fi
	1441	fi
	1442	done
	1443
	1444
	1445	if [[ $host_found = false ]]
	1446	then
	1447	if [[ $host = all ]]
	1448	then
	1449	printf "\n +++ no hosts found in configuration file"
	1450	else
	1451	printf "\n +++ host \"$host\" not found in configuration file"
	1452	fi
	1453	locat=config_file; exit
	1454	fi
	1455
	1456
	1457
[503]	1458	# FINAL WORK
[1]	1459	rm -f hosts_found_in_config_file
[811]	1460	rm -f ${local_source_path}/${mainprog}_sources_check.tar
[1]	1461

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |