Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 801

Last change on this file since 801 was 793, checked in by maronga, 13 years ago
GUI for mrun added
Property svn:keywords set to `Id Rev`
File size: 49.0 KB

Rev	Line
[1]	1	#!/bin/ksh
[503]	2	# mbuild - script for compiling the PALM code and its utility programs
[169]	3	# $Id: mbuild 793 2011-12-12 15:15:24Z suehring $
[1]	4
[503]	5	# Procedure to compile code on local and remote hosts using the
	6	# make-mechanism. The source code must be provided on the local host.
[1]	7
[503]	8	# Last changes:
	9	# 06/05/02 - Siggi - start development
	10	# 12/06/02 - Siggi - first version finished
	11	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) included
	12	# 19/12/02 - Siggi - ibmb included
[1]	13	# 05/02/03 - Siggi - hostname nobela included
	14	# 04/03/03 - Siggi - host nech included
	15	# 06/03/03 - Siggi - make_call_string is echoed without '' to
	16	# file LAST_MAKE_CALL (otherwise error on NEC, because
	17	# '' are part of compiler options
	18	# 16/03/03 - Siggi - Two underscores are placed in front of every define
	19	# string, in case that palm.f90 version contains
	20	# such strings
	21	# 16/04/03 - Siggi - First extensions for linux machines
	22	# 24/06/03 - Siggi - host orkan included
	23	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
	24	# 24/07/03 - Siggi - host maestro admitted
	25	# 06/08/03 - Siggi - host gregale admitted
	26	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
	27	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
	28	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
	29	# (-D$OMP=OMP) in order to avoid problems with
	30	# OMP_NUM_THREADS
	31	# 09/01/04 - Siggi - action above cancelled
	32	# 28/01/04 - Siggi - action above re-cancelled
	33	# 08/03/04 - Siggi - host scirocco admitted
	34	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
	35	# the respective .f90 file is not listed in the makefile
	36	# and deletion is demanded by the user
	37	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
	38	# due to error in ssh installation (otherwise a prompt
	39	# for the password appears)
	40	# 23/07/04 - Siggi - changes due to the new berni configuration
	41	# (federation switch)
	42	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
	43	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
	44	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
	45	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
	46	# 24/04/05 - Siggi - netcdf support on lcmuk
	47	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
	48	# 12/05/05 - Siggi - netcdf support on ibm
	49	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
	50	# 18/05/05 - Siggi - netcdf support on nec
	51	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
	52	# 23/05/05 - Siggi - netcdf support on ibms
	53	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
	54	# 30/06/05 - Siggi - netcdf support on bora
	55	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
	56	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
	57	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
	58	# host gfdl5 (ibmy) admitted
	59	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
	60	# 20/01/06 - Siggi - cpp directive for ibmy
	61	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
	62	# 10/02/06 - Siggi - modifications for scp on decalpha
	63	# 13/04/06 - Siggi - ostria admitted
	64	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
	65	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
	66	# 29/05/05 - Siggi - atmos (lcide) admitted
	67	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
	68	# 24/11/06 - Siggi - breva and levanto admitted
	69	# 07/02/07 - Siggi - adapted for RIAM (neck)
[5]	70	# 10/02/07 - Siggi - all hpmuk-related code removed
[40]	71	# 02/03/07 - Siggi - compilation of utility programs and transfer of
[27]	72	# scripts to remote hosts added (option -u)
[66]	73	# 14/03/07 - Siggi - fimm admitted, revision number added to terminal
	74	# output
[69]	75	# 16/03/07 - Siggi - adjustments (netcdf) for lctit
	76	# adjustments for running under pdksh, local ip-addres
	77	# is not determined any more
[82]	78	# 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
	79	# from configuration file
	80	# host identifier (local_host) is read from config file
[116]	81	# 10/10/07 - Siggi - bugfix: handling of comment lines
[181]	82	# 18/07/08 - Siggi - adapted for lcsgih
	83	# 21/07/08 - Siggi - mainprog (executable) is added to the tar-file
	84	# ({mainprog}_current_version)
[206]	85	# 02/10/08 - Siggi - adapted for lcxt4
[215]	86	# 14/11/08 - Siggi - update mechanism completely revised: source tarfile
	87	# remains in source directory, one depository per block
[266]	88	# (given in the config-file) is created, allways all
	89	# files from the source directory are copied to the
	90	# respective depository, no additional file checks are
	91	# done any more (version 2.1)
[224]	92	# 13/01/09 - Marcus- re-enable compilation more than once on lcmuk (as on
	93	# other machines)
[266]	94	# 21/03/09 - Siggi - -u copies also copies process_dvr_output and
	95	# .dvrserver.config
[305]	96	# 21/04/09 - Siggi - adjustments for new IBM at DKRZ, which is now ibmh
[367]	97	# 25/08/09 - BjornM- adapted for lck
[407]	98	# 01/12/09 - BjornM- re-adjustments for lcxt4
[437]	99	# 01/02/10 - Siggi - adjustments for lcxt5m
[475]	100	# 03/02/10 - Siggi - make options (mopts) to be set by configuration file
	101	# implemented, remoted mode option -r completely
	102	# removed, t3e related parts removed
[492]	103	# 26/02/10 - BjornM- re-adjustments for lcxt4 (new modules)
[493]	104	# 01/03/10 - Siggi - mpilib replaced by modules: explicit module settings
	105	# removed; modules should now be given in the
	106	# configuration file
[503]	107	# 02/03/10 - Siggi - utility programs are created separately for each
	108	# block in the configuration file,
	109	# parallel make for utility programs
[508]	110	# 12/03/10 - Siggi - bugfix: remode_md was given a wrong value
[544]	111	# 16/08/10 - BjornM- bugfix: call of modules on local host, new workaround
	112	# for lcxt4
[555]	113	# 07/09/10 - Siggi - bugfix for wrong netcdf/3.6.3 module on lcsgi
[622]	114	# 08/12/10 - Siggi - initialization of the module command changed for
	115	# SGI-ICE/lcsgi
	116	# adjustments for Kyushu Univ. (lcrte, ibmku)
[635]	117	# 14/12/10 - Siggi - adjustments for new Tsubame system at Tokyo
	118	# institute of technology (lctit)
[693]	119	# 04/03/11 - BjornM- re-adjustments for lcxt4
	120	# 06/03/11 - Siggi - adjustments for ibmkisti
[717]	121	# 03/04/11 - Micha - added lckordi
[740]	122	# 17/08/11 - Siggi - HLRN access via hicegate0 (130.75.4.101)
[784]	123	# 27/11/11 - Siggi - Bugfix for make options setting (-j)
[793]	124	# 12/12/11 - BjornM- added mrun GUI to ulitity programs
[1]	125
	126
[508]	127
[503]	128	# VARIABLE DECLARATIONS + DEFAULT VALUES
[22]	129	compile_utility_programs=false
[1]	130	config_file=.mrun.config
[67]	131	fimm=false
[1]	132	host=all
	133	host_found=false
	134	locat=normal
	135	makefile=""
[493]	136	module_calls=""
[1]	137	scirocco=false
	138	silent=false
	139	suf=f90
	140	update=false
[83]	141	working_directory=`pwd`
[1]	142
	143	typeset -i ih ihost=0
	144
[66]	145	typeset -R30 calltime
[1]	146	typeset -L20 column1
	147	typeset -L50 column2
	148	typeset -L70 column3
[215]	149	typeset -L40 version="MBUILD 2.1 Rev$Rev: 793 $"
[1]	150
[503]	151	# ERROR HANDLING
	152	# IN CASE OF EXIT:
[83]	153	trap 'rm -rf $working_directory/tmp_mbuild
[69]	154	if [[ $locat != normal ]]
[1]	155	then
	156	printf "\n\n +++ mbuild killed \n\n"
	157	else
	158	printf "\n\n *** mbuild finished \n\n"
	159	fi' exit
	160
	161
[503]	162	# IN CASE OF TERMINAL-BREAK:
[83]	163	trap 'rm -rf $working_directory/tmp_mbuild
[69]	164	printf "\n\n +++ mbuild killed by \"^C\" \n\n"
[1]	165	exit
	166	' 2
	167
	168
[215]	169	tmp_mbuild=${working_directory}/tmp_mbuild
[1]	170
[503]	171	# READ SHELLSCRIPT-OPTIONS
[475]	172	while getopts :c:h:m:s:u option
[1]	173	do
	174	case $option in
	175	(c) config_file=$OPTARG;;
	176	(h) host=$OPTARG;;
	177	(m) makefile=$OPTARG;;
	178	(s) suf=$OPTARG;;
[22]	179	(u) compile_utility_programs=true;;
[1]	180	(\?) printf "\n +++ unknown option $OPTARG \n";
	181	locat=parameter; exit;;
	182	esac
	183	done
	184
	185
	186
[503]	187	# CHECK, IF CONFIGURATION-FILE EXISTS
[82]	188	if [[ ! -f $config_file ]]
	189	then
	190	printf "\n +++ configuration file: "
	191	printf "\n $config_file"
	192	printf "\n does not exist"
	193	locat=configuration; exit
	194	fi
	195
	196
	197
[503]	198	# DETERMINE THE LOCAL HOST
[1]	199	local_host_real_name=$(hostname)
[69]	200	# local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
	201
[1]	202
[82]	203
[503]	204	# DETERMINE HOST-IDENTIFIER (local_host) FROM THE CONFIG-FILE
[82]	205	line=""
[215]	206	grep "%host_identifier" $config_file > $tmp_mbuild
[82]	207	while read line
	208	do
[116]	209	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
[82]	210	then
	211	HOSTNAME=`echo $line \| cut -d" " -s -f2`
	212	host_identifier=`echo $line \| cut -d" " -s -f3`
[83]	213	if [[ $local_host_real_name = $HOSTNAME ]]
[82]	214	then
	215	local_host=$host_identifier
	216	break
	217	fi
	218	fi
[215]	219	done < $tmp_mbuild
[82]	220
	221	if [[ "$local_host" = "" ]]
	222	then
	223	printf "\n +++ no host identifier found in configuration file \"$config_file\""
	224	printf "\n for local host \"$local_host_real_name\"."
	225	printf "\n Please add line"
	226	printf "\n \"\%host_identifier $local_host_real_name <identifier>\""
	227	printf "\n to the configuration file."
	228	locat=local_host; exit
	229	fi
	230
	231
	232
[1]	233	[[ $local_host_real_name = scirocco ]] && scirocco=true
[67]	234	[[ $local_host_real_name = fimm.bccs.uib.no ]] && fimm=true
[1]	235
	236
	237
	238	if [[ $local_host != ibms ]]
	239	then
	240	config_file=$PWD/$config_file
	241	else
	242	config_file=`pwd`/$config_file
	243	fi
	244
	245
	246
[503]	247	# DETERMINE USER NAME ON LOCAL HOST FROM THE CONFIG-FILE
[1]	248	line=""
[215]	249	grep " $local_host" $config_file \| grep "%remote_username" > $tmp_mbuild
[69]	250	while read line
[1]	251	do
[116]	252	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
[1]	253	then
	254	local_username=`echo $line \| cut -d" " -s -f2`
	255	fi
[215]	256	done < $tmp_mbuild
[1]	257
[82]	258
[1]	259	if [[ "$local_username" = "" ]]
	260	then
	261	printf "\n +++ no user name found in configuration file"
	262	printf "\n for local host \"$local_host\" "
	263	locat=config_file; exit
	264	fi
	265
	266
[503]	267	# DETERMINE LOCAL SOURCE-CODE PATH.
	268	# FIRST CHECK, IF A GLOBAL SOURCE-CODE PATH HAS BEEN DECLARED FOR ALL HOSTS.
	269	# THEREFORE, FIRST SET ALL GLOBAL VARIABLES DECLARED IN THE CONFIG-FILE,
	270	# BECAUSE THEY MAY BE USED AS PART OF THE PATH NAME.
[5]	271	line=""
[215]	272	grep "%" $config_file > $tmp_mbuild
[69]	273	while read line
[5]	274	do
[116]	275	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" && $(echo $line \| cut -c1) != "#" ]]
[1]	276	then
[5]	277	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
	278	value=`echo $line \| cut -d" " -s -f2`
[8]	279	eval export $var=\$value
[1]	280	fi
[215]	281	done < $tmp_mbuild
[1]	282
[503]	283	# NOW CHECK, IF A GLOBAL SOURCE-CODE-PATH HAS BEEN DECLARED
[1]	284	line=""
[215]	285	grep "%source_path" $config_file > $tmp_mbuild
[69]	286	while read line
[1]	287	do
	288	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	289	then
	290	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
	291	then
	292	global_source_path=`echo $line \| cut -d" " -s -f2`
	293	fi
	294	fi
[215]	295	done < $tmp_mbuild
[1]	296
	297	line=""
[215]	298	grep " $local_host" $config_file \| grep "%source_path" > $tmp_mbuild
[69]	299	while read line
[1]	300	do
	301	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	302	then
	303	local_source_path=`echo $line \| cut -d" " -s -f2`
	304	fi
[215]	305	done < $tmp_mbuild
[1]	306
	307	if [[ "$local_source_path" = "" ]]
	308	then
	309	if [[ "$global_source_path" != "" ]]
	310	then
	311	local_source_path=$global_source_path
	312	else
	313	printf "\n +++ no source path found in configuration file"
	314	printf "\n for local host \"$local_host\" "
	315	printf "\n please set \"\%source_path\" in configuration file"
	316	locat=config_file; exit
	317	fi
	318	fi
	319	eval local_source_path=$local_source_path
[8]	320	eval local_source_path=$local_source_path
[1]	321
	322
[215]	323
[503]	324	# DETERMINE GLOBAL DEPOSITORY-PATH
[1]	325	line=""
[215]	326	grep "%depository_path" $config_file > $tmp_mbuild
[69]	327	while read line
[1]	328	do
	329	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	330	then
	331	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
	332	then
	333	global_depository_path=`echo $line \| cut -d" " -s -f2`
	334	fi
	335	fi
[215]	336	done < $tmp_mbuild
[1]	337
	338
	339
[503]	340	# CHECK, IF A MAIN PROGRAM HAS BEEN DEFINED IN THE CONFIG-FILE
[5]	341	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
	342	then
	343	printf "\n +++ no main program or more than one main program defined"
	344	printf "\n in configuration file"
	345	locat=configuration; exit
	346	else
	347	line=`grep "%mainprog" $config_file`
	348	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
	349	then
	350	printf "\n +++ no main program defined in configuration file"
	351	locat=configuration; exit
	352	fi
	353	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
	354	fi
	355
	356
	357
[503]	358	# CHECK IF MAKEFILE EXITS
[1]	359	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
	360	if [[ ! -f $makefile ]]
	361	then
	362	printf "\n +++ makefile: "
	363	printf "\n $makefile"
	364	printf "\n does not exist"
	365	locat=makefile; exit
	366	fi
	367
	368
[503]	369	# HEADER-OUTPUT (PART1: MESSAGES CONCERNING THE LOCAL HOST)
[1]	370	calltime=$(date)
	371	printf "\n"
	372	printf "#------------------------------------------------------------------------# \n"
	373	printf "\| $version$calltime \| \n"
	374	printf "\| \| \n"
	375	column1="called on:"; column2=$local_host_real_name
	376	printf "\| $column1$column2 \| \n"
	377	column1="local username:"; column2=$local_username
	378	printf "\| $column1$column2 \| \n"
	379	column1="local IP-addres:"; column2=$local_addres
	380	printf "\| $column1$column2 \| \n"
	381	column1="config file:"; column2=$config_file
	382	printf "\| $column1$column2 \| \n"
	383	column1="makefile:"; column2=$makefile
	384	printf "\| $column1$column2 \| \n"
	385	column1="local source path:"; column2=$local_source_path
	386	printf "\| $column1$column2 \| \n"
	387	printf "#------------------------------------------------------------------------# \n"
	388
	389	# printf "\| \| \n"
	390
	391
[40]	392	if [[ $compile_utility_programs = false ]]
	393	then
[1]	394
[503]	395	# IN ANY CASE, GIVE ALL FILES WRITE-PERMIT, IN ORDER TO AVOID PROBLEMS
	396	# WITH OVERWRITING FILES ON THE REMOTE HOST
[215]	397	cd $local_source_path
	398	printf "\n\n *** tar of makefile and source files in $local_source_path"
[40]	399	tar -cf ${mainprog}_sources.tar Makefile *.$suf
	400	printf "\n"
[1]	401
[40]	402	fi
[1]	403
	404
[40]	405
[503]	406	# GET CONFIRMATION TO CONTINUE
[1]	407	if [[ $host = all ]]
	408	then
	409	printf "\n *** updates will be made for ALL hosts found in"
	410	printf "\n the configuration file"
	411	else
	412	printf "\n *** update will be made for host \"$host\" "
	413	fi
	414
	415	if [[ $silent = false ]]
	416	then
	417	answer=dummy
	418	printf "\n\n"
	419	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
	420	do
	421	printf " >>> continue (y/n) ? "
	422	read answer
	423	done
	424	if [[ $answer = n \|\| $answer = N ]]
	425	then
	426	locat=user_abort; exit
	427	fi
	428	fi
	429
	430
	431
	432
	433	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
	434	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
	435	printf "\n *** scanning configuration file for host(s) ..."
	436
[215]	437	grep %fopts $config_file > $tmp_mbuild
[69]	438	while read line
[1]	439	do
	440	# KOMMENTARZEILEN UEBERSPRINGEN
	441	[[ $(echo $line \| cut -c1) = "#" ]] && continue
	442	(( ihost = ihost + 1 ))
	443	hostline[$ihost]="$line"
[215]	444	done < $tmp_mbuild
[1]	445
	446
	447	while (( ih < ihost ))
	448	do
	449
	450	(( ih = ih + 1 ))
	451
	452	# REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
	453	# NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
	454	# SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
	455	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
	456	remote_host=`echo $remote_host_string \| cut -d" " -f1`
	457	if [[ $host != all ]]
	458	then
	459	[[ $remote_host != $host ]] && continue
	460	fi
	461	host_found=true
	462	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
	463	if [[ $condition1 = $remote_host ]]
	464	then
	465	condition1=""
	466	else
	467	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
	468	fi
	469
[493]	470	modules=""
[82]	471	netcdf_inc=""
	472	netcdf_lib=""
[784]	473	make_options=""
[1]	474
	475	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
	476	case $remote_host in
[717]	477	(lckordi) remote_adress=210.219.61.8;;
[116]	478	(lcmuk) remote_addres=130.75.105.2;;
[622]	479	(lcrte) remote_addres=133.5.185.60;;
[181]	480	(lcsgib) remote_addres=130.73.232.102;;
[740]	481	(lcsgih) remote_addres=130.75.4.101;;
[367]	482	(lck) remote_addres=165.132.26.61;;
[635]	483	(lctit) remote_addres=10.1.6.170;;
[206]	484	(lcxt4) remote_addres=129.177.20.113;;
[437]	485	(lcxt5m) remote_addres=193.166.211.144;;
[83]	486	(decalpha) remote_addres=165.132.26.56;;
[305]	487	(ibmh) remote_addres=136.172.40.15;;
[693]	488	(ibmkisti) remote_addres=150.183.146.24;;
[622]	489	(ibmku) remote_addres=133.5.4.129;;
[83]	490	(ibms) remote_addres=150.183.5.101;;
	491	(ibmy) remote_addres=165.132.26.58;;
	492	(nech) remote_addres=136.172.44.192;;
	493	(neck) remote_addres=133.5.178.11;;
	494	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
	495	(*) if [[ $local_host != $remote_host ]]
[1]	496	then
[83]	497	printf "\n +++ remote host \"$remote_host\" unknown";
[503]	498	printf "\n please inform PALM group support!"
[1]	499	fi;;
	500	esac
	501
	502
	503	# REMOTE-USERNAMEN ERMITTELN
	504	line=""
[116]	505	found=false
[215]	506	grep "$remote_host_string" $config_file \| grep "%remote_username" > $tmp_mbuild
[69]	507	while read line1
[1]	508	do
[116]	509
[1]	510	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	511	then
	512	line="$line1"
	513	fi
[116]	514
	515	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	516	then
	517	remote_username=`echo $line \| cut -d" " -s -f2`
	518	found=true
	519	fi
	520
[215]	521	done < $tmp_mbuild
[1]	522
[116]	523	if [[ $found = false ]]
[1]	524	then
	525	printf "\n +++ no remote username found in configuration file"
	526	printf "\n for \"$remote_host_string\" "
	527	locat=config_file; exit
	528	fi
	529
	530
	531	# REMOTE-QUELLTEXTPFAD ERMITTELN
	532	line=""
[54]	533	remote_source_path=""
[215]	534	grep "$remote_host_string" $config_file \| grep "%source_path" > $tmp_mbuild
[69]	535	while read line1
[1]	536	do
[116]	537
[1]	538	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	539	then
	540	line="$line1"
	541	fi
[116]	542
	543	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	544	then
	545	remote_source_path=`echo $line \| cut -d" " -s -f2`
	546	fi
	547
[215]	548	done < $tmp_mbuild
[1]	549
	550	if [[ "$remote_source_path" = "" ]]
	551	then
	552	if [[ "$global_source_path" != "" ]]
	553	then
	554	remote_source_path=$global_source_path
	555	else
	556	printf "\n +++ no source path found in configuration file"
	557	printf "\n for \"$remote_host_string\" "
	558	locat=config_file; exit
	559	fi
	560	fi
	561
[22]	562	remote_ud=${remote_source_path}/../UTIL
[24]	563	remote_ud=$(eval echo $remote_ud)
[1]	564
[54]	565
[1]	566	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
[54]	567	remote_md=""
[1]	568	line=""
[215]	569	grep "$remote_host_string" $config_file \| grep "%depository_path" > $tmp_mbuild
[69]	570	while read line1
[1]	571	do
[116]	572
[1]	573	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	574	then
	575	line="$line1"
	576	fi
[116]	577
	578	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	579	then
	580	remote_md=`echo $line \| cut -d" " -s -f2`
	581	fi
	582
[215]	583	done < $tmp_mbuild
[1]	584
	585	if [[ "$remote_md" = "" ]]
	586	then
	587	if [[ "$global_depository_path" != "" ]]
	588	then
	589	remote_md=$global_depository_path
	590	else
	591	printf "\n +++ no depository path found in configuration file"
	592	printf "\n for \"$remote_host_string\" "
	593	printf "\n please set \"\%depository_path\" in configuration file"
	594	locat=config_file; exit
	595	fi
	596	fi
	597
[8]	598	remote_md=$(eval echo $remote_md)
[503]	599	block=""
	600	[[ "$condition1" != "" ]] && block=_$condition1
	601	[[ "$condition2" != "" ]] && block=${block}_$condition2
[508]	602	remote_md=${remote_md}$block
[1]	603
[8]	604
[1]	605	# COMPILERNAMEN ERMITTELN
	606	line=""
[116]	607	found=false
[215]	608	grep "$remote_host_string" $config_file \| grep "%compiler_name " > $tmp_mbuild
[69]	609	while read line1
[1]	610	do
[116]	611
[1]	612	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	613	then
	614	line="$line1"
	615	fi
[116]	616
	617	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	618	then
	619	compiler_name=`echo $line \| cut -d" " -s -f2`
	620	found=true
	621	fi
	622
[215]	623	done < $tmp_mbuild
[1]	624
[116]	625	if [[ $found = false ]]
[1]	626	then
	627	printf "\n +++ no compiler name found in configuration file"
	628	printf "\n for \"$remote_host_string\" "
	629	locat=config_file; exit
	630	fi
	631
	632
[27]	633	# BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
	634	# SERIELLER COMPILERNAME ERMITTELT WERDEN
	635	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
	636	then
	637	line=""
[116]	638	found=false
[215]	639	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" > $tmp_mbuild
[69]	640	while read line1
[27]	641	do
[116]	642
[27]	643	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	644	then
	645	line="$line1"
	646	fi
[116]	647
	648	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	649	then
	650	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
	651	found=true
	652	fi
	653
[215]	654	done < $tmp_mbuild
[1]	655
[116]	656	if [[ $found = false ]]
[27]	657	then
[28]	658	printf "\n +++ no serial compiler name found in configuration file"
[27]	659	printf "\n for \"$remote_host_string\" "
	660	locat=config_file; exit
	661	fi
	662	else
	663	compiler_name_ser=$compiler_name
	664	fi
	665
	666
	667
[82]	668	# PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
	669	line=""
[116]	670	found=false
[215]	671	grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
[82]	672	while read line1
	673	do
[116]	674
[82]	675	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	676	then
	677	line="$line1"
	678	fi
[116]	679
	680	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	681	then
	682	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	683	cpp_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	684	found=true
	685	fi
	686
[215]	687	done < $tmp_mbuild
[116]	688
	689	if [[ $found = false ]]
[82]	690	then
	691	printf "\n +++ no preprocessor options found in configuration file"
	692	printf "\n for \"$remote_host_string\" "
	693	locat=config_file; exit
	694	fi
	695
[116]	696
[82]	697	# RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
	698	for string in $remote_host_string
	699	do
	700	if [[ $(echo $remote_host \| cut -c1-2) = lc && $(echo $string \| cut -c1-2) = lc ]]
	701	then
	702	cpp_options="$cpp_options -D__lc "
[83]	703	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $(echo $string \| cut -c1-3) = ibm ]]
	704	then
	705	cpp_options="${cpp_options},-D__ibm"
	706	elif [[ $(echo $remote_host \| cut -c1-3) = nec && $(echo $string \| cut -c1-3) = nec ]]
	707	then
	708	cpp_options="${cpp_options} -D__nec"
[82]	709	else
[83]	710	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
	711	then
	712	cpp_options="${cpp_options},-D__$string"
	713	else
	714	cpp_options="$cpp_options -D__$string "
	715	fi
[82]	716	fi
	717	done
	718
	719
	720
	721	# NETCDF-OPTIONEN ERMITTELN
	722	line=""
[215]	723	grep "$remote_host_string" $config_file \| grep "%netcdf_inc" > $tmp_mbuild
[82]	724	while read line1
	725	do
[116]	726
[82]	727	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	728	then
	729	line="$line1"
	730	fi
[116]	731
	732	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	733	then
	734	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	735	netcdf_inc=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	736	fi
	737
[215]	738	done < $tmp_mbuild
[82]	739
	740	line=""
[215]	741	grep "$remote_host_string" $config_file \| grep "%netcdf_lib" > $tmp_mbuild
[82]	742	while read line1
	743	do
[116]	744
[82]	745	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	746	then
	747	line="$line1"
	748	fi
[116]	749
	750	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	751	then
	752	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	753	netcdf_lib=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	754	fi
	755
[215]	756	done < $tmp_mbuild
[82]	757
	758
	759
[475]	760	# get make options
	761	line=""
	762	found=false
	763	grep "$remote_host_string" $config_file \| grep "%mopts" > $tmp_mbuild
	764	while read line1
	765	do
	766
	767	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	768	then
	769	line="$line1"
	770	fi
	771
	772	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	773	then
	774	# remove colons from directive string
	775	make_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	776
	777	fi
	778
	779	done < $tmp_mbuild
	780
	781
	782
[1]	783	# COMPILEROPTIONEN ERMITTELN
	784	line=""
[116]	785	found=false
[215]	786	grep "$remote_host_string" $config_file \| grep "%fopts" > $tmp_mbuild
[69]	787	while read line1
[1]	788	do
[116]	789
[1]	790	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	791	then
	792	line="$line1"
	793	fi
[116]	794
	795	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	796	then
	797	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	798	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	799	found=true
	800
	801	# NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
	802	compiler_options="$compiler_options $netcdf_inc"
	803	fi
	804
[215]	805	done < $tmp_mbuild
[116]	806
	807	if [[ $found = false ]]
[1]	808	then
	809	printf "\n +++ no compiler options found in configuration file"
	810	printf "\n for \"$remote_host_string\" "
	811	locat=config_file; exit
	812	fi
[82]	813
[1]	814
	815
[503]	816	# get modules to be loaded
[221]	817	line=""
[493]	818	grep "$remote_host_string" $config_file \| grep "%modules" > $tmp_mbuild
[221]	819	while read line1
	820	do
	821
	822	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	823	then
	824	line="$line1"
	825	fi
	826
	827	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	828	then
	829	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
[493]	830	modules=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
[221]	831	fi
	832
	833	done < $tmp_mbuild
	834
	835
	836
	837
[1]	838	# LADER-OPTIONEN ERMITTELN
	839	line=""
[116]	840	found=false
[215]	841	grep "$remote_host_string" $config_file \| grep "%lopts" > $tmp_mbuild
[69]	842	while read line1
[1]	843	do
[116]	844
[1]	845	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	846	then
	847	line="$line1"
	848	fi
[116]	849
	850	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	851	then
	852	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	853	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	854	found=true
	855
	856	# NETCDF-LIBRARY HINZUFUEGEN
	857	loader_options="$loader_options $netcdf_lib"
	858	fi
	859
[215]	860	done < $tmp_mbuild
[1]	861
[116]	862	if [[ $found = false ]]
[1]	863	then
	864	printf "\n +++ no loader options found in configuration file"
	865	printf "\n for \"$remote_host_string\" "
	866	locat=config_file; exit
	867	fi
[82]	868
[1]	869
	870	printf "\n\n#------------------------------------------------------------------------# \n"
	871	if [[ $remote_host = $local_host ]]
	872	then
	873	column1="remote_host:"; column2="$remote_host (= local host!)"
	874	else
	875	column1="remote_host:"; column2=$remote_host
	876	fi
	877	printf "\| $column1$column2 \| \n"
	878	printf "\| \| \n"
	879	column1="conditions:"; column2="$condition1 $condition2"
	880	printf "\| $column1$column2 \| \n"
	881	column1="make depository:"; column2=$remote_md
	882	printf "\| $column1$column2 \| \n"
[215]	883	line=$(echo "$remote_md" \| cut -c51-)
	884	while [[ "$line" != "" ]]
	885	do
	886	column1=""
	887	column2=$line
	888	printf "\| $column1$column2 \| \n"
	889	line=$(echo "$line" \| cut -c51-)
	890	done
[25]	891	if [[ $compile_utility_programs = true ]]
	892	then
	893	column1="utility directory:"; column2=$remote_ud
	894	printf "\| $column1$column2 \| \n"
	895	fi
[1]	896	column1="username:"; column2=$remote_username
	897	printf "\| $column1$column2 \| \n"
	898	column1="addres:"; column2=$remote_addres
	899	printf "\| $column1$column2 \| \n"
	900	column1="compiler:"; column2=$compiler_name
	901	printf "\| $column1$column2 \| \n"
[28]	902	if [[ $compile_utility_programs = true ]]
	903	then
	904	column1="serial compiler:"; column2=$compiler_name_ser
	905	printf "\| $column1$column2 \| \n"
	906	fi
[475]	907	if [[ "$make_options" != "" ]]
	908	then
	909	column1="make options:"; column2=$make_options
	910	printf "\| $column1$column2 \| \n"
	911	fi
[1]	912	column1="cpp options:"; column2=$cpp_options
	913	printf "\| $column1$column2 \| \n"
	914	line=$(echo "$cpp_options" \| cut -c51-)
	915	while [[ "$line" != "" ]]
	916	do
	917	column1=""
	918	column2=$line
	919	printf "\| $column1$column2 \| \n"
	920	line=$(echo "$line" \| cut -c51-)
	921	done
	922	column1="compiler options:"; column2=$compiler_options
	923	printf "\| $column1$column2 \| \n"
	924	line=$(echo "$compiler_options" \| cut -c51-)
	925	while [[ "$line" != "" ]]
	926	do
	927	column1=""
	928	column2=$line
	929	printf "\| $column1$column2 \| \n"
	930	line=$(echo "$line" \| cut -c51-)
	931	done
	932	column1="loader options:"; column2=$loader_options
	933	printf "\| $column1$column2 \| \n"
	934	line=$(echo "$loader_options" \| cut -c51-)
	935	while [[ "$line" != "" ]]
	936	do
	937	column1=""
	938	column2=$line
	939	printf "\| $column1$column2 \| \n"
	940	line=$(echo "$line" \| cut -c51-)
	941	done
[493]	942	if [[ $modules != "" ]]
	943	then
	944	column1="modules to be load:"; column2=$modules
	945	printf "\| $column1$column2 \| \n"
	946	line=$(echo "$modules" \| cut -c51-)
	947	while [[ "$line" != "" ]]
	948	do
	949	column1=""
	950	column2=$line
	951	printf "\| $column1$column2 \| \n"
	952	line=$(echo "$line" \| cut -c51-)
	953	done
	954	fi
[1]	955	printf "#------------------------------------------------------------------------# \n"
	956
	957	if [[ $silent = false ]]
	958	then
	959	answer=dummy
	960	printf "\n\n"
	961	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
	962	do
	963	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
	964	read answer
	965	done
	966	if [[ $answer = a \|\| $answer = A ]]
	967	then
	968	locat=user_abort; exit
	969	fi
	970	if [[ $answer = c \|\| $answer = C ]]
	971	then
[503]	972	silent=true
[1]	973	fi
	974	if [[ $answer = s \|\| $answer = S ]]
	975	then
	976	continue
	977	fi
	978	fi
	979
	980
[475]	981	# make on remote host
	982	if [[ $remote_host != $local_host ]]
[1]	983	then
	984
[475]	985	if [[ $compile_utility_programs = false ]]
[1]	986	then
	987
[475]	988	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	989	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
	990	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
	991	if [[ $remote_host != lctit ]]
	992	then
	993	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
	994	else
	995	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	996	# MIT SSH, DESHALB AUFRUF PER PIPE
	997	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
	998	fi
	999	if [[ $local_host = decalpha ]]
	1000	then
	1001	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
	1002	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1003	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1004	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
	1005	/bin/scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
	1006	else
	1007	scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
	1008	fi
[1]	1009
	1010
	1011
[475]	1012	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
	1013	echo " *** untar previous update on remote host, if existing"
	1014	if [[ $remote_host != lctit ]]
	1015	then
	1016	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
	1017	else
	1018	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	1019	# MIT SSH, DESHALB AUFRUF PER PIPE
	1020	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
	1021	fi
[1]	1022
	1023
[475]	1024	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
	1025	echo " *** untar actual sources on remote host"
	1026	if [[ $remote_host != lctit ]]
	1027	then
	1028	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
	1029	else
	1030	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	1031	# MIT SSH, DESHALB AUFRUF PER PIPE
	1032	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
	1033	fi
[1]	1034
	1035
[475]	1036	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1037	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
	1038	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
	1039	# Z.B. DIE PFADE ZUM COMPILER)
	1040	echo " *** execute \"make\" on remote host"
[1]	1041
[493]	1042
	1043	# generate make call with make options
[475]	1044	if [[ $remote_host = nech ]]
	1045	then
	1046	make_call_string="sxmake $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1047	else
	1048	make_call_string="make $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1049	fi
[1]	1050
[493]	1051	# generate command to load modules, if modules are given
	1052	if [[ "$modules" != "" ]]
	1053	then
[678]	1054	if [[ $remote_host = lctit ]]
	1055	then
	1056	module_calls=". $modules"
	1057	else
	1058	module_calls="module load ${modules};"
	1059	fi
[555]	1060
	1061	# bugfix for wrong netcdf module
	1062	if [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
	1063	then
	1064	if [[ $(echo $module_calls \| grep -c netcdf/3.6.3-intel) != 0 ]]
	1065	then
	1066	module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
	1067	fi
	1068	fi
[503]	1069	else
	1070	module_calls=""
[493]	1071	fi
	1072
[693]	1073	if [[ $remote_host = ibmkisti \|\| $remote_host = ibms \|\| $remote_host = ibmy ]]
[475]	1074	then
[1]	1075
[493]	1076	ssh ${remote_username}@${remote_addres} "$module_calls cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1077
[475]	1078	elif [[ $remote_host = ibmh ]]
	1079	then
[1]	1080
[493]	1081	print "$module_calls export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1082
[475]	1083	elif [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
	1084	then
[1]	1085
[622]	1086	# print ". /usr/share/modules/init/bash; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1087	print "eval \`/sw/swdist/bin/modulesinit\`; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1088
[475]	1089	elif [[ $remote_host = lctit ]]
	1090	then
[1]	1091
[475]	1092	echo " " > ${remote_host}_last_make_protokoll
	1093	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
	1094	do
	1095	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1096	done
[1]	1097
[475]	1098	elif [[ $remote_host = lcxt4 ]]
[1]	1099	then
	1100
[691]	1101	ssh ${remote_username}@${remote_addres} ". /opt/modules/default/init/ksh; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1102
[475]	1103	else
[1]	1104
[493]	1105	print "cd $module_calls ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1106
[475]	1107	fi
[1]	1108
[475]	1109	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
	1110	then
	1111	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
	1112	if [[ $silent = false ]]
[40]	1113	then
[475]	1114	answer=dummy
	1115	printf "\n"
	1116	while [[ "$answer" != c && "$answer" != k ]]
[40]	1117	do
[475]	1118	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
	1119	read answer
	1120	if [[ "$answer" = l ]]
	1121	then
	1122	more ${remote_host}_last_make_protokoll
	1123	fi
[40]	1124	done
[475]	1125	if [[ $answer = k ]]
[40]	1126	then
[475]	1127	locat=user_abort; exit
[1]	1128	fi
	1129	fi
[475]	1130	fi
[1]	1131
	1132
	1133
[475]	1134	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
	1135	printf "\n *** tar update on remote host ..."
	1136	if [[ $remote_host != lctit ]]
	1137	then
	1138	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod"
	1139	else
	1140	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	1141	# MIT SSH, DESHALB AUFRUF PER PIPE
	1142	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
	1143	fi
[1]	1144
	1145
[475]	1146	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
	1147	# printf "\n *** \"make clean\" on remote host ..."
	1148	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
	1149	# printf "\n"
[1]	1150
	1151
[25]	1152
	1153
[475]	1154	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
	1155	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	1156	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
	1157	elif [[ $compile_utility_programs = true ]]
	1158	then
	1159
	1160	printf "\n\n"
	1161	echo " *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
	1162	cd ${local_source_path}/../SCRIPTS
	1163
	1164	if [[ $remote_host != lctit ]]
[22]	1165	then
[475]	1166	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
	1167	else
[503]	1168	# TIT ERLAUBT NUR DIE AUSFUEHRUNG GANZ BESTIMMTER KOMMANDOS
[475]	1169	# MIT SSH, DESHALB AUFRUF PER PIPE
	1170	print "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_addres} 2>&1
	1171	fi
[22]	1172
[475]	1173	# KOPIEREN DER SCRIPTE
	1174	if [[ $local_host = decalpha ]]
	1175	then
[503]	1176	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTAENDIGEN PFADES
[475]	1177	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1178	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1179	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
	1180	/bin/scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
	1181	else
	1182	scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
	1183	fi
[22]	1184
[475]	1185	cd - > /dev/null
	1186	cd ${local_source_path}/../UTIL
[22]	1187
[27]	1188
[475]	1189	# KOPIEREN DER UTILITY-PROGRAMME
	1190	if [[ $local_host = decalpha ]]
	1191	then
	1192	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
	1193	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1194	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1195	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
	1196	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
	1197	else
	1198	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
	1199	fi
[27]	1200
	1201
[22]	1202
[475]	1203	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1204	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
	1205	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
	1206	# Z.B. DIE PFADE ZUM COMPILER)
	1207	echo " *** execute \"make\" on remote host"
[22]	1208
[475]	1209	if [[ $remote_host = nech ]]
	1210	then
[503]	1211	make_call_string="sxmake $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
[475]	1212	else
[503]	1213	make_call_string="make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
[475]	1214	fi
[22]	1215
[493]	1216	# generate command to load modules, if modules are given
	1217	if [[ "$modules" != "" ]]
	1218	then
[678]	1219	if [[ $remote_host = lctit ]]
	1220	then
	1221	module_calls=". $modules"
	1222	else
	1223	module_calls="module load ${modules};"
	1224	fi
[562]	1225
	1226	# bugfix for wrong netcdf module
	1227	if [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
	1228	then
	1229	if [[ $(echo $module_calls \| grep -c netcdf/3.6.3-intel) != 0 ]]
	1230	then
	1231	module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
	1232	fi
	1233	fi
[503]	1234	else
	1235	module_calls=""
[493]	1236	fi
	1237
[475]	1238	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
	1239	then
[22]	1240
[493]	1241	ssh ${remote_username}@${remote_addres} "$module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
[22]	1242
[475]	1243	elif [[ $remote_host = ibmh ]]
	1244	then
[22]	1245
[493]	1246	print "$module_calls export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres}
[22]	1247
[475]	1248	elif [[ $remote_host = lctit ]]
	1249	then
[22]	1250
[475]	1251	echo " " > ${remote_host}_last_make_protokoll
	1252	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
	1253	do
[493]	1254	print "$module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[475]	1255	done
[22]	1256
[475]	1257	elif [[ $remote_host = lcxt4 ]]
	1258	then
[22]	1259
[691]	1260	ssh ${remote_username}@${remote_addres} ". /opt/modules/default/init/ksh; $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
[22]	1261
[475]	1262	else
[407]	1263
[493]	1264	print "$module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[407]	1265
[475]	1266	fi
[22]	1267
[475]	1268	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
[22]	1269
[475]	1270	rm -rf ${remote_host}_last_make_protokoll
[22]	1271
[475]	1272	# make on local host
	1273	else
[22]	1274
[544]	1275	# workaround for lcxt4
	1276	if [[ $remote_host = lcxt4 ]]
	1277	then
	1278	. /opt/modules/default/init/ksh
	1279	fi
	1280
	1281	# first load modules, if given
	1282	if [[ "$modules" != "" ]]
	1283	then
[678]	1284	if [[ $remote_host = lctit ]]
	1285	then
	1286	. $modules
	1287	else
	1288	module load ${modules}
	1289	fi
[544]	1290	fi
	1291
	1292
[475]	1293	if [[ $compile_utility_programs = false ]]
	1294	then
[22]	1295
[475]	1296	# DEPOSITORY VERZEICHNIS ERZEUGEN, FALLS NOCH NICHT VORHANDEN
	1297	eval remote_md=$remote_md
	1298	if [[ ! -d $remote_md ]]
[40]	1299	then
[475]	1300	if mkdir $remote_md
[215]	1301	then
[475]	1302	printf "\n\n *** directory for make depository:"
	1303	printf "\n $remote_md"
	1304	printf "\n was created\n"
	1305	else
	1306	printf "\n +++ directory for make depository:"
	1307	printf "\n $remote_md"
	1308	printf "\n cannot be created"
	1309	locat=local_depository_path; exit
[215]	1310	fi
[475]	1311	fi
[215]	1312
[475]	1313	# QUELLTEXT-DATEIEN AUS REPOSITORY INS DEPOSITORY KOPIEREN
	1314	echo " "
	1315	echo " *** updating sources in $remote_md"
	1316	cd $remote_md
	1317	cp $local_source_path/${mainprog}_sources.tar .
	1318	tar xf ${mainprog}_sources.tar
[215]	1319
[475]	1320	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
	1321	echo " "
	1322	echo " *** execute \"make\" on local host"
[1]	1323
[475]	1324	make $make_options PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
[40]	1325
[475]	1326	if [[ $? != 0 ]]
	1327	then
	1328	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
	1329	if [[ $silent = false ]]
[1]	1330	then
[475]	1331	answer=dummy
	1332	printf "\n"
	1333	while [[ "$answer" != c && "$answer" != k ]]
	1334	do
	1335	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
	1336	read answer
	1337	if [[ "$answer" = l ]]
[1]	1338	then
[475]	1339	more ${remote_host}_last_make_protokoll
[1]	1340	fi
[475]	1341	done
	1342	if [[ $answer = k ]]
	1343	then
	1344	locat=user_abort; exit
[1]	1345	fi
	1346	fi
[475]	1347	fi
[1]	1348
	1349
[503]	1350	# TAR NEW VERSION ON LOCAL HOST
[475]	1351	printf "\n *** tar update on local host ..."
	1352	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
[1]	1353
[22]	1354
[475]	1355	# COMPILE THE UTILITY PROGRAMS
	1356	elif [[ $compile_utility_programs = true ]]
	1357	then
	1358	printf "\n\n"
	1359	echo " *** compiling the utility programs ..."
	1360	cd ${local_source_path}/../UTIL
[503]	1361
	1362	# TOUCH FILES IN ORDER TO FORCE COMPILATION FOR EVERY BLOCK
	1363	touch *.f90
	1364	make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
[793]	1365
	1366	# check if qmake is available and compile mrungui in that case
	1367	if which qmake >/dev/null; then
	1368	cd mrungui
	1369	touch *
	1370	qmake
	1371	make
	1372	make clean
	1373	rm Makefile
	1374	cd ..
	1375	else
	1376	echo " +++ no qmake found. The mrun GUI (optional) cannot be compiled."
	1377	fi
	1378
	1379
[475]	1380	cd - > /dev/null
[1]	1381	fi
	1382
	1383	fi
[475]	1384
[1]	1385	done
	1386
	1387
	1388	if [[ $host_found = false ]]
	1389	then
	1390	if [[ $host = all ]]
	1391	then
	1392	printf "\n +++ no hosts found in configuration file"
	1393	else
	1394	printf "\n +++ host \"$host\" not found in configuration file"
	1395	fi
	1396	locat=config_file; exit
	1397	fi
	1398
	1399
	1400
[503]	1401	# FINAL WORK
[1]	1402	rm -f hosts_found_in_config_file
	1403

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |