Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 785

Last change on this file since 785 was 784, checked in by raasch, 12 years ago
Bugfix for make options setting (-j)
Property svn:keywords set to `Id Rev`
File size: 48.5 KB

Rev	Line
[1]	1	#!/bin/ksh
[503]	2	# mbuild - script for compiling the PALM code and its utility programs
[169]	3	# $Id: mbuild 784 2011-11-27 07:37:48Z raasch $
[1]	4
[503]	5	# Procedure to compile code on local and remote hosts using the
	6	# make-mechanism. The source code must be provided on the local host.
[1]	7
[503]	8	# Last changes:
	9	# 06/05/02 - Siggi - start development
	10	# 12/06/02 - Siggi - first version finished
	11	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) included
	12	# 19/12/02 - Siggi - ibmb included
[1]	13	# 05/02/03 - Siggi - hostname nobela included
	14	# 04/03/03 - Siggi - host nech included
	15	# 06/03/03 - Siggi - make_call_string is echoed without '' to
	16	# file LAST_MAKE_CALL (otherwise error on NEC, because
	17	# '' are part of compiler options
	18	# 16/03/03 - Siggi - Two underscores are placed in front of every define
	19	# string, in case that palm.f90 version contains
	20	# such strings
	21	# 16/04/03 - Siggi - First extensions for linux machines
	22	# 24/06/03 - Siggi - host orkan included
	23	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
	24	# 24/07/03 - Siggi - host maestro admitted
	25	# 06/08/03 - Siggi - host gregale admitted
	26	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
	27	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
	28	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
	29	# (-D$OMP=OMP) in order to avoid problems with
	30	# OMP_NUM_THREADS
	31	# 09/01/04 - Siggi - action above cancelled
	32	# 28/01/04 - Siggi - action above re-cancelled
	33	# 08/03/04 - Siggi - host scirocco admitted
	34	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
	35	# the respective .f90 file is not listed in the makefile
	36	# and deletion is demanded by the user
	37	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
	38	# due to error in ssh installation (otherwise a prompt
	39	# for the password appears)
	40	# 23/07/04 - Siggi - changes due to the new berni configuration
	41	# (federation switch)
	42	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
	43	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
	44	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
	45	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
	46	# 24/04/05 - Siggi - netcdf support on lcmuk
	47	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
	48	# 12/05/05 - Siggi - netcdf support on ibm
	49	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
	50	# 18/05/05 - Siggi - netcdf support on nec
	51	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
	52	# 23/05/05 - Siggi - netcdf support on ibms
	53	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
	54	# 30/06/05 - Siggi - netcdf support on bora
	55	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
	56	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
	57	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
	58	# host gfdl5 (ibmy) admitted
	59	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
	60	# 20/01/06 - Siggi - cpp directive for ibmy
	61	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
	62	# 10/02/06 - Siggi - modifications for scp on decalpha
	63	# 13/04/06 - Siggi - ostria admitted
	64	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
	65	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
	66	# 29/05/05 - Siggi - atmos (lcide) admitted
	67	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
	68	# 24/11/06 - Siggi - breva and levanto admitted
	69	# 07/02/07 - Siggi - adapted for RIAM (neck)
[5]	70	# 10/02/07 - Siggi - all hpmuk-related code removed
[40]	71	# 02/03/07 - Siggi - compilation of utility programs and transfer of
[27]	72	# scripts to remote hosts added (option -u)
[66]	73	# 14/03/07 - Siggi - fimm admitted, revision number added to terminal
	74	# output
[69]	75	# 16/03/07 - Siggi - adjustments (netcdf) for lctit
	76	# adjustments for running under pdksh, local ip-addres
	77	# is not determined any more
[82]	78	# 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
	79	# from configuration file
	80	# host identifier (local_host) is read from config file
[116]	81	# 10/10/07 - Siggi - bugfix: handling of comment lines
[181]	82	# 18/07/08 - Siggi - adapted for lcsgih
	83	# 21/07/08 - Siggi - mainprog (executable) is added to the tar-file
	84	# ({mainprog}_current_version)
[206]	85	# 02/10/08 - Siggi - adapted for lcxt4
[215]	86	# 14/11/08 - Siggi - update mechanism completely revised: source tarfile
	87	# remains in source directory, one depository per block
[266]	88	# (given in the config-file) is created, allways all
	89	# files from the source directory are copied to the
	90	# respective depository, no additional file checks are
	91	# done any more (version 2.1)
[224]	92	# 13/01/09 - Marcus- re-enable compilation more than once on lcmuk (as on
	93	# other machines)
[266]	94	# 21/03/09 - Siggi - -u copies also copies process_dvr_output and
	95	# .dvrserver.config
[305]	96	# 21/04/09 - Siggi - adjustments for new IBM at DKRZ, which is now ibmh
[367]	97	# 25/08/09 - BjornM- adapted for lck
[407]	98	# 01/12/09 - BjornM- re-adjustments for lcxt4
[437]	99	# 01/02/10 - Siggi - adjustments for lcxt5m
[475]	100	# 03/02/10 - Siggi - make options (mopts) to be set by configuration file
	101	# implemented, remoted mode option -r completely
	102	# removed, t3e related parts removed
[492]	103	# 26/02/10 - BjornM- re-adjustments for lcxt4 (new modules)
[493]	104	# 01/03/10 - Siggi - mpilib replaced by modules: explicit module settings
	105	# removed; modules should now be given in the
	106	# configuration file
[503]	107	# 02/03/10 - Siggi - utility programs are created separately for each
	108	# block in the configuration file,
	109	# parallel make for utility programs
[508]	110	# 12/03/10 - Siggi - bugfix: remode_md was given a wrong value
[544]	111	# 16/08/10 - BjornM- bugfix: call of modules on local host, new workaround
	112	# for lcxt4
[555]	113	# 07/09/10 - Siggi - bugfix for wrong netcdf/3.6.3 module on lcsgi
[622]	114	# 08/12/10 - Siggi - initialization of the module command changed for
	115	# SGI-ICE/lcsgi
	116	# adjustments for Kyushu Univ. (lcrte, ibmku)
[635]	117	# 14/12/10 - Siggi - adjustments for new Tsubame system at Tokyo
	118	# institute of technology (lctit)
[693]	119	# 04/03/11 - BjornM- re-adjustments for lcxt4
	120	# 06/03/11 - Siggi - adjustments for ibmkisti
[717]	121	# 03/04/11 - Micha - added lckordi
[740]	122	# 17/08/11 - Siggi - HLRN access via hicegate0 (130.75.4.101)
[784]	123	# 27/11/11 - Siggi - Bugfix for make options setting (-j)
[1]	124
	125
[508]	126
[503]	127	# VARIABLE DECLARATIONS + DEFAULT VALUES
[22]	128	compile_utility_programs=false
[1]	129	config_file=.mrun.config
[67]	130	fimm=false
[1]	131	host=all
	132	host_found=false
	133	locat=normal
	134	makefile=""
[493]	135	module_calls=""
[1]	136	scirocco=false
	137	silent=false
	138	suf=f90
	139	update=false
[83]	140	working_directory=`pwd`
[1]	141
	142	typeset -i ih ihost=0
	143
[66]	144	typeset -R30 calltime
[1]	145	typeset -L20 column1
	146	typeset -L50 column2
	147	typeset -L70 column3
[215]	148	typeset -L40 version="MBUILD 2.1 Rev$Rev: 784 $"
[1]	149
[503]	150	# ERROR HANDLING
	151	# IN CASE OF EXIT:
[83]	152	trap 'rm -rf $working_directory/tmp_mbuild
[69]	153	if [[ $locat != normal ]]
[1]	154	then
	155	printf "\n\n +++ mbuild killed \n\n"
	156	else
	157	printf "\n\n *** mbuild finished \n\n"
	158	fi' exit
	159
	160
[503]	161	# IN CASE OF TERMINAL-BREAK:
[83]	162	trap 'rm -rf $working_directory/tmp_mbuild
[69]	163	printf "\n\n +++ mbuild killed by \"^C\" \n\n"
[1]	164	exit
	165	' 2
	166
	167
[215]	168	tmp_mbuild=${working_directory}/tmp_mbuild
[1]	169
[503]	170	# READ SHELLSCRIPT-OPTIONS
[475]	171	while getopts :c:h:m:s:u option
[1]	172	do
	173	case $option in
	174	(c) config_file=$OPTARG;;
	175	(h) host=$OPTARG;;
	176	(m) makefile=$OPTARG;;
	177	(s) suf=$OPTARG;;
[22]	178	(u) compile_utility_programs=true;;
[1]	179	(\?) printf "\n +++ unknown option $OPTARG \n";
	180	locat=parameter; exit;;
	181	esac
	182	done
	183
	184
	185
[503]	186	# CHECK, IF CONFIGURATION-FILE EXISTS
[82]	187	if [[ ! -f $config_file ]]
	188	then
	189	printf "\n +++ configuration file: "
	190	printf "\n $config_file"
	191	printf "\n does not exist"
	192	locat=configuration; exit
	193	fi
	194
	195
	196
[503]	197	# DETERMINE THE LOCAL HOST
[1]	198	local_host_real_name=$(hostname)
[69]	199	# local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
	200
[1]	201
[82]	202
[503]	203	# DETERMINE HOST-IDENTIFIER (local_host) FROM THE CONFIG-FILE
[82]	204	line=""
[215]	205	grep "%host_identifier" $config_file > $tmp_mbuild
[82]	206	while read line
	207	do
[116]	208	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
[82]	209	then
	210	HOSTNAME=`echo $line \| cut -d" " -s -f2`
	211	host_identifier=`echo $line \| cut -d" " -s -f3`
[83]	212	if [[ $local_host_real_name = $HOSTNAME ]]
[82]	213	then
	214	local_host=$host_identifier
	215	break
	216	fi
	217	fi
[215]	218	done < $tmp_mbuild
[82]	219
	220	if [[ "$local_host" = "" ]]
	221	then
	222	printf "\n +++ no host identifier found in configuration file \"$config_file\""
	223	printf "\n for local host \"$local_host_real_name\"."
	224	printf "\n Please add line"
	225	printf "\n \"\%host_identifier $local_host_real_name <identifier>\""
	226	printf "\n to the configuration file."
	227	locat=local_host; exit
	228	fi
	229
	230
	231
[1]	232	[[ $local_host_real_name = scirocco ]] && scirocco=true
[67]	233	[[ $local_host_real_name = fimm.bccs.uib.no ]] && fimm=true
[1]	234
	235
	236
	237	if [[ $local_host != ibms ]]
	238	then
	239	config_file=$PWD/$config_file
	240	else
	241	config_file=`pwd`/$config_file
	242	fi
	243
	244
	245
[503]	246	# DETERMINE USER NAME ON LOCAL HOST FROM THE CONFIG-FILE
[1]	247	line=""
[215]	248	grep " $local_host" $config_file \| grep "%remote_username" > $tmp_mbuild
[69]	249	while read line
[1]	250	do
[116]	251	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
[1]	252	then
	253	local_username=`echo $line \| cut -d" " -s -f2`
	254	fi
[215]	255	done < $tmp_mbuild
[1]	256
[82]	257
[1]	258	if [[ "$local_username" = "" ]]
	259	then
	260	printf "\n +++ no user name found in configuration file"
	261	printf "\n for local host \"$local_host\" "
	262	locat=config_file; exit
	263	fi
	264
	265
[503]	266	# DETERMINE LOCAL SOURCE-CODE PATH.
	267	# FIRST CHECK, IF A GLOBAL SOURCE-CODE PATH HAS BEEN DECLARED FOR ALL HOSTS.
	268	# THEREFORE, FIRST SET ALL GLOBAL VARIABLES DECLARED IN THE CONFIG-FILE,
	269	# BECAUSE THEY MAY BE USED AS PART OF THE PATH NAME.
[5]	270	line=""
[215]	271	grep "%" $config_file > $tmp_mbuild
[69]	272	while read line
[5]	273	do
[116]	274	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" && $(echo $line \| cut -c1) != "#" ]]
[1]	275	then
[5]	276	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
	277	value=`echo $line \| cut -d" " -s -f2`
[8]	278	eval export $var=\$value
[1]	279	fi
[215]	280	done < $tmp_mbuild
[1]	281
[503]	282	# NOW CHECK, IF A GLOBAL SOURCE-CODE-PATH HAS BEEN DECLARED
[1]	283	line=""
[215]	284	grep "%source_path" $config_file > $tmp_mbuild
[69]	285	while read line
[1]	286	do
	287	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	288	then
	289	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
	290	then
	291	global_source_path=`echo $line \| cut -d" " -s -f2`
	292	fi
	293	fi
[215]	294	done < $tmp_mbuild
[1]	295
	296	line=""
[215]	297	grep " $local_host" $config_file \| grep "%source_path" > $tmp_mbuild
[69]	298	while read line
[1]	299	do
	300	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	301	then
	302	local_source_path=`echo $line \| cut -d" " -s -f2`
	303	fi
[215]	304	done < $tmp_mbuild
[1]	305
	306	if [[ "$local_source_path" = "" ]]
	307	then
	308	if [[ "$global_source_path" != "" ]]
	309	then
	310	local_source_path=$global_source_path
	311	else
	312	printf "\n +++ no source path found in configuration file"
	313	printf "\n for local host \"$local_host\" "
	314	printf "\n please set \"\%source_path\" in configuration file"
	315	locat=config_file; exit
	316	fi
	317	fi
	318	eval local_source_path=$local_source_path
[8]	319	eval local_source_path=$local_source_path
[1]	320
	321
[215]	322
[503]	323	# DETERMINE GLOBAL DEPOSITORY-PATH
[1]	324	line=""
[215]	325	grep "%depository_path" $config_file > $tmp_mbuild
[69]	326	while read line
[1]	327	do
	328	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	329	then
	330	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
	331	then
	332	global_depository_path=`echo $line \| cut -d" " -s -f2`
	333	fi
	334	fi
[215]	335	done < $tmp_mbuild
[1]	336
	337
	338
[503]	339	# CHECK, IF A MAIN PROGRAM HAS BEEN DEFINED IN THE CONFIG-FILE
[5]	340	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
	341	then
	342	printf "\n +++ no main program or more than one main program defined"
	343	printf "\n in configuration file"
	344	locat=configuration; exit
	345	else
	346	line=`grep "%mainprog" $config_file`
	347	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
	348	then
	349	printf "\n +++ no main program defined in configuration file"
	350	locat=configuration; exit
	351	fi
	352	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
	353	fi
	354
	355
	356
[503]	357	# CHECK IF MAKEFILE EXITS
[1]	358	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
	359	if [[ ! -f $makefile ]]
	360	then
	361	printf "\n +++ makefile: "
	362	printf "\n $makefile"
	363	printf "\n does not exist"
	364	locat=makefile; exit
	365	fi
	366
	367
[503]	368	# HEADER-OUTPUT (PART1: MESSAGES CONCERNING THE LOCAL HOST)
[1]	369	calltime=$(date)
	370	printf "\n"
	371	printf "#------------------------------------------------------------------------# \n"
	372	printf "\| $version$calltime \| \n"
	373	printf "\| \| \n"
	374	column1="called on:"; column2=$local_host_real_name
	375	printf "\| $column1$column2 \| \n"
	376	column1="local username:"; column2=$local_username
	377	printf "\| $column1$column2 \| \n"
	378	column1="local IP-addres:"; column2=$local_addres
	379	printf "\| $column1$column2 \| \n"
	380	column1="config file:"; column2=$config_file
	381	printf "\| $column1$column2 \| \n"
	382	column1="makefile:"; column2=$makefile
	383	printf "\| $column1$column2 \| \n"
	384	column1="local source path:"; column2=$local_source_path
	385	printf "\| $column1$column2 \| \n"
	386	printf "#------------------------------------------------------------------------# \n"
	387
	388	# printf "\| \| \n"
	389
	390
[40]	391	if [[ $compile_utility_programs = false ]]
	392	then
[1]	393
[503]	394	# IN ANY CASE, GIVE ALL FILES WRITE-PERMIT, IN ORDER TO AVOID PROBLEMS
	395	# WITH OVERWRITING FILES ON THE REMOTE HOST
[215]	396	cd $local_source_path
	397	printf "\n\n *** tar of makefile and source files in $local_source_path"
[40]	398	tar -cf ${mainprog}_sources.tar Makefile *.$suf
	399	printf "\n"
[1]	400
[40]	401	fi
[1]	402
	403
[40]	404
[503]	405	# GET CONFIRMATION TO CONTINUE
[1]	406	if [[ $host = all ]]
	407	then
	408	printf "\n *** updates will be made for ALL hosts found in"
	409	printf "\n the configuration file"
	410	else
	411	printf "\n *** update will be made for host \"$host\" "
	412	fi
	413
	414	if [[ $silent = false ]]
	415	then
	416	answer=dummy
	417	printf "\n\n"
	418	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
	419	do
	420	printf " >>> continue (y/n) ? "
	421	read answer
	422	done
	423	if [[ $answer = n \|\| $answer = N ]]
	424	then
	425	locat=user_abort; exit
	426	fi
	427	fi
	428
	429
	430
	431
	432	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
	433	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
	434	printf "\n *** scanning configuration file for host(s) ..."
	435
[215]	436	grep %fopts $config_file > $tmp_mbuild
[69]	437	while read line
[1]	438	do
	439	# KOMMENTARZEILEN UEBERSPRINGEN
	440	[[ $(echo $line \| cut -c1) = "#" ]] && continue
	441	(( ihost = ihost + 1 ))
	442	hostline[$ihost]="$line"
[215]	443	done < $tmp_mbuild
[1]	444
	445
	446	while (( ih < ihost ))
	447	do
	448
	449	(( ih = ih + 1 ))
	450
	451	# REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
	452	# NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
	453	# SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
	454	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
	455	remote_host=`echo $remote_host_string \| cut -d" " -f1`
	456	if [[ $host != all ]]
	457	then
	458	[[ $remote_host != $host ]] && continue
	459	fi
	460	host_found=true
	461	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
	462	if [[ $condition1 = $remote_host ]]
	463	then
	464	condition1=""
	465	else
	466	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
	467	fi
	468
[493]	469	modules=""
[82]	470	netcdf_inc=""
	471	netcdf_lib=""
[784]	472	make_options=""
[1]	473
	474	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
	475	case $remote_host in
[717]	476	(lckordi) remote_adress=210.219.61.8;;
[116]	477	(lcmuk) remote_addres=130.75.105.2;;
[622]	478	(lcrte) remote_addres=133.5.185.60;;
[181]	479	(lcsgib) remote_addres=130.73.232.102;;
[740]	480	(lcsgih) remote_addres=130.75.4.101;;
[367]	481	(lck) remote_addres=165.132.26.61;;
[635]	482	(lctit) remote_addres=10.1.6.170;;
[206]	483	(lcxt4) remote_addres=129.177.20.113;;
[437]	484	(lcxt5m) remote_addres=193.166.211.144;;
[83]	485	(decalpha) remote_addres=165.132.26.56;;
[305]	486	(ibmh) remote_addres=136.172.40.15;;
[693]	487	(ibmkisti) remote_addres=150.183.146.24;;
[622]	488	(ibmku) remote_addres=133.5.4.129;;
[83]	489	(ibms) remote_addres=150.183.5.101;;
	490	(ibmy) remote_addres=165.132.26.58;;
	491	(nech) remote_addres=136.172.44.192;;
	492	(neck) remote_addres=133.5.178.11;;
	493	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
	494	(*) if [[ $local_host != $remote_host ]]
[1]	495	then
[83]	496	printf "\n +++ remote host \"$remote_host\" unknown";
[503]	497	printf "\n please inform PALM group support!"
[1]	498	fi;;
	499	esac
	500
	501
	502	# REMOTE-USERNAMEN ERMITTELN
	503	line=""
[116]	504	found=false
[215]	505	grep "$remote_host_string" $config_file \| grep "%remote_username" > $tmp_mbuild
[69]	506	while read line1
[1]	507	do
[116]	508
[1]	509	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	510	then
	511	line="$line1"
	512	fi
[116]	513
	514	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	515	then
	516	remote_username=`echo $line \| cut -d" " -s -f2`
	517	found=true
	518	fi
	519
[215]	520	done < $tmp_mbuild
[1]	521
[116]	522	if [[ $found = false ]]
[1]	523	then
	524	printf "\n +++ no remote username found in configuration file"
	525	printf "\n for \"$remote_host_string\" "
	526	locat=config_file; exit
	527	fi
	528
	529
	530	# REMOTE-QUELLTEXTPFAD ERMITTELN
	531	line=""
[54]	532	remote_source_path=""
[215]	533	grep "$remote_host_string" $config_file \| grep "%source_path" > $tmp_mbuild
[69]	534	while read line1
[1]	535	do
[116]	536
[1]	537	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	538	then
	539	line="$line1"
	540	fi
[116]	541
	542	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	543	then
	544	remote_source_path=`echo $line \| cut -d" " -s -f2`
	545	fi
	546
[215]	547	done < $tmp_mbuild
[1]	548
	549	if [[ "$remote_source_path" = "" ]]
	550	then
	551	if [[ "$global_source_path" != "" ]]
	552	then
	553	remote_source_path=$global_source_path
	554	else
	555	printf "\n +++ no source path found in configuration file"
	556	printf "\n for \"$remote_host_string\" "
	557	locat=config_file; exit
	558	fi
	559	fi
	560
[22]	561	remote_ud=${remote_source_path}/../UTIL
[24]	562	remote_ud=$(eval echo $remote_ud)
[1]	563
[54]	564
[1]	565	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
[54]	566	remote_md=""
[1]	567	line=""
[215]	568	grep "$remote_host_string" $config_file \| grep "%depository_path" > $tmp_mbuild
[69]	569	while read line1
[1]	570	do
[116]	571
[1]	572	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	573	then
	574	line="$line1"
	575	fi
[116]	576
	577	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	578	then
	579	remote_md=`echo $line \| cut -d" " -s -f2`
	580	fi
	581
[215]	582	done < $tmp_mbuild
[1]	583
	584	if [[ "$remote_md" = "" ]]
	585	then
	586	if [[ "$global_depository_path" != "" ]]
	587	then
	588	remote_md=$global_depository_path
	589	else
	590	printf "\n +++ no depository path found in configuration file"
	591	printf "\n for \"$remote_host_string\" "
	592	printf "\n please set \"\%depository_path\" in configuration file"
	593	locat=config_file; exit
	594	fi
	595	fi
	596
[8]	597	remote_md=$(eval echo $remote_md)
[503]	598	block=""
	599	[[ "$condition1" != "" ]] && block=_$condition1
	600	[[ "$condition2" != "" ]] && block=${block}_$condition2
[508]	601	remote_md=${remote_md}$block
[1]	602
[8]	603
[1]	604	# COMPILERNAMEN ERMITTELN
	605	line=""
[116]	606	found=false
[215]	607	grep "$remote_host_string" $config_file \| grep "%compiler_name " > $tmp_mbuild
[69]	608	while read line1
[1]	609	do
[116]	610
[1]	611	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	612	then
	613	line="$line1"
	614	fi
[116]	615
	616	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	617	then
	618	compiler_name=`echo $line \| cut -d" " -s -f2`
	619	found=true
	620	fi
	621
[215]	622	done < $tmp_mbuild
[1]	623
[116]	624	if [[ $found = false ]]
[1]	625	then
	626	printf "\n +++ no compiler name found in configuration file"
	627	printf "\n for \"$remote_host_string\" "
	628	locat=config_file; exit
	629	fi
	630
	631
[27]	632	# BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
	633	# SERIELLER COMPILERNAME ERMITTELT WERDEN
	634	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
	635	then
	636	line=""
[116]	637	found=false
[215]	638	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" > $tmp_mbuild
[69]	639	while read line1
[27]	640	do
[116]	641
[27]	642	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	643	then
	644	line="$line1"
	645	fi
[116]	646
	647	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	648	then
	649	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
	650	found=true
	651	fi
	652
[215]	653	done < $tmp_mbuild
[1]	654
[116]	655	if [[ $found = false ]]
[27]	656	then
[28]	657	printf "\n +++ no serial compiler name found in configuration file"
[27]	658	printf "\n for \"$remote_host_string\" "
	659	locat=config_file; exit
	660	fi
	661	else
	662	compiler_name_ser=$compiler_name
	663	fi
	664
	665
	666
[82]	667	# PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
	668	line=""
[116]	669	found=false
[215]	670	grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
[82]	671	while read line1
	672	do
[116]	673
[82]	674	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	675	then
	676	line="$line1"
	677	fi
[116]	678
	679	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	680	then
	681	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	682	cpp_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	683	found=true
	684	fi
	685
[215]	686	done < $tmp_mbuild
[116]	687
	688	if [[ $found = false ]]
[82]	689	then
	690	printf "\n +++ no preprocessor options found in configuration file"
	691	printf "\n for \"$remote_host_string\" "
	692	locat=config_file; exit
	693	fi
	694
[116]	695
[82]	696	# RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
	697	for string in $remote_host_string
	698	do
	699	if [[ $(echo $remote_host \| cut -c1-2) = lc && $(echo $string \| cut -c1-2) = lc ]]
	700	then
	701	cpp_options="$cpp_options -D__lc "
[83]	702	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $(echo $string \| cut -c1-3) = ibm ]]
	703	then
	704	cpp_options="${cpp_options},-D__ibm"
	705	elif [[ $(echo $remote_host \| cut -c1-3) = nec && $(echo $string \| cut -c1-3) = nec ]]
	706	then
	707	cpp_options="${cpp_options} -D__nec"
[82]	708	else
[83]	709	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
	710	then
	711	cpp_options="${cpp_options},-D__$string"
	712	else
	713	cpp_options="$cpp_options -D__$string "
	714	fi
[82]	715	fi
	716	done
	717
	718
	719
	720	# NETCDF-OPTIONEN ERMITTELN
	721	line=""
[215]	722	grep "$remote_host_string" $config_file \| grep "%netcdf_inc" > $tmp_mbuild
[82]	723	while read line1
	724	do
[116]	725
[82]	726	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	727	then
	728	line="$line1"
	729	fi
[116]	730
	731	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	732	then
	733	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	734	netcdf_inc=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	735	fi
	736
[215]	737	done < $tmp_mbuild
[82]	738
	739	line=""
[215]	740	grep "$remote_host_string" $config_file \| grep "%netcdf_lib" > $tmp_mbuild
[82]	741	while read line1
	742	do
[116]	743
[82]	744	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	745	then
	746	line="$line1"
	747	fi
[116]	748
	749	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	750	then
	751	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	752	netcdf_lib=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	753	fi
	754
[215]	755	done < $tmp_mbuild
[82]	756
	757
	758
[475]	759	# get make options
	760	line=""
	761	found=false
	762	grep "$remote_host_string" $config_file \| grep "%mopts" > $tmp_mbuild
	763	while read line1
	764	do
	765
	766	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	767	then
	768	line="$line1"
	769	fi
	770
	771	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	772	then
	773	# remove colons from directive string
	774	make_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	775
	776	fi
	777
	778	done < $tmp_mbuild
	779
	780
	781
[1]	782	# COMPILEROPTIONEN ERMITTELN
	783	line=""
[116]	784	found=false
[215]	785	grep "$remote_host_string" $config_file \| grep "%fopts" > $tmp_mbuild
[69]	786	while read line1
[1]	787	do
[116]	788
[1]	789	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	790	then
	791	line="$line1"
	792	fi
[116]	793
	794	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	795	then
	796	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	797	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	798	found=true
	799
	800	# NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
	801	compiler_options="$compiler_options $netcdf_inc"
	802	fi
	803
[215]	804	done < $tmp_mbuild
[116]	805
	806	if [[ $found = false ]]
[1]	807	then
	808	printf "\n +++ no compiler options found in configuration file"
	809	printf "\n for \"$remote_host_string\" "
	810	locat=config_file; exit
	811	fi
[82]	812
[1]	813
	814
[503]	815	# get modules to be loaded
[221]	816	line=""
[493]	817	grep "$remote_host_string" $config_file \| grep "%modules" > $tmp_mbuild
[221]	818	while read line1
	819	do
	820
	821	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	822	then
	823	line="$line1"
	824	fi
	825
	826	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	827	then
	828	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
[493]	829	modules=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
[221]	830	fi
	831
	832	done < $tmp_mbuild
	833
	834
	835
	836
[1]	837	# LADER-OPTIONEN ERMITTELN
	838	line=""
[116]	839	found=false
[215]	840	grep "$remote_host_string" $config_file \| grep "%lopts" > $tmp_mbuild
[69]	841	while read line1
[1]	842	do
[116]	843
[1]	844	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	845	then
	846	line="$line1"
	847	fi
[116]	848
	849	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	850	then
	851	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	852	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	853	found=true
	854
	855	# NETCDF-LIBRARY HINZUFUEGEN
	856	loader_options="$loader_options $netcdf_lib"
	857	fi
	858
[215]	859	done < $tmp_mbuild
[1]	860
[116]	861	if [[ $found = false ]]
[1]	862	then
	863	printf "\n +++ no loader options found in configuration file"
	864	printf "\n for \"$remote_host_string\" "
	865	locat=config_file; exit
	866	fi
[82]	867
[1]	868
	869	printf "\n\n#------------------------------------------------------------------------# \n"
	870	if [[ $remote_host = $local_host ]]
	871	then
	872	column1="remote_host:"; column2="$remote_host (= local host!)"
	873	else
	874	column1="remote_host:"; column2=$remote_host
	875	fi
	876	printf "\| $column1$column2 \| \n"
	877	printf "\| \| \n"
	878	column1="conditions:"; column2="$condition1 $condition2"
	879	printf "\| $column1$column2 \| \n"
	880	column1="make depository:"; column2=$remote_md
	881	printf "\| $column1$column2 \| \n"
[215]	882	line=$(echo "$remote_md" \| cut -c51-)
	883	while [[ "$line" != "" ]]
	884	do
	885	column1=""
	886	column2=$line
	887	printf "\| $column1$column2 \| \n"
	888	line=$(echo "$line" \| cut -c51-)
	889	done
[25]	890	if [[ $compile_utility_programs = true ]]
	891	then
	892	column1="utility directory:"; column2=$remote_ud
	893	printf "\| $column1$column2 \| \n"
	894	fi
[1]	895	column1="username:"; column2=$remote_username
	896	printf "\| $column1$column2 \| \n"
	897	column1="addres:"; column2=$remote_addres
	898	printf "\| $column1$column2 \| \n"
	899	column1="compiler:"; column2=$compiler_name
	900	printf "\| $column1$column2 \| \n"
[28]	901	if [[ $compile_utility_programs = true ]]
	902	then
	903	column1="serial compiler:"; column2=$compiler_name_ser
	904	printf "\| $column1$column2 \| \n"
	905	fi
[475]	906	if [[ "$make_options" != "" ]]
	907	then
	908	column1="make options:"; column2=$make_options
	909	printf "\| $column1$column2 \| \n"
	910	fi
[1]	911	column1="cpp options:"; column2=$cpp_options
	912	printf "\| $column1$column2 \| \n"
	913	line=$(echo "$cpp_options" \| cut -c51-)
	914	while [[ "$line" != "" ]]
	915	do
	916	column1=""
	917	column2=$line
	918	printf "\| $column1$column2 \| \n"
	919	line=$(echo "$line" \| cut -c51-)
	920	done
	921	column1="compiler options:"; column2=$compiler_options
	922	printf "\| $column1$column2 \| \n"
	923	line=$(echo "$compiler_options" \| cut -c51-)
	924	while [[ "$line" != "" ]]
	925	do
	926	column1=""
	927	column2=$line
	928	printf "\| $column1$column2 \| \n"
	929	line=$(echo "$line" \| cut -c51-)
	930	done
	931	column1="loader options:"; column2=$loader_options
	932	printf "\| $column1$column2 \| \n"
	933	line=$(echo "$loader_options" \| cut -c51-)
	934	while [[ "$line" != "" ]]
	935	do
	936	column1=""
	937	column2=$line
	938	printf "\| $column1$column2 \| \n"
	939	line=$(echo "$line" \| cut -c51-)
	940	done
[493]	941	if [[ $modules != "" ]]
	942	then
	943	column1="modules to be load:"; column2=$modules
	944	printf "\| $column1$column2 \| \n"
	945	line=$(echo "$modules" \| cut -c51-)
	946	while [[ "$line" != "" ]]
	947	do
	948	column1=""
	949	column2=$line
	950	printf "\| $column1$column2 \| \n"
	951	line=$(echo "$line" \| cut -c51-)
	952	done
	953	fi
[1]	954	printf "#------------------------------------------------------------------------# \n"
	955
	956	if [[ $silent = false ]]
	957	then
	958	answer=dummy
	959	printf "\n\n"
	960	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
	961	do
	962	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
	963	read answer
	964	done
	965	if [[ $answer = a \|\| $answer = A ]]
	966	then
	967	locat=user_abort; exit
	968	fi
	969	if [[ $answer = c \|\| $answer = C ]]
	970	then
[503]	971	silent=true
[1]	972	fi
	973	if [[ $answer = s \|\| $answer = S ]]
	974	then
	975	continue
	976	fi
	977	fi
	978
	979
[475]	980	# make on remote host
	981	if [[ $remote_host != $local_host ]]
[1]	982	then
	983
[475]	984	if [[ $compile_utility_programs = false ]]
[1]	985	then
	986
[475]	987	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	988	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
	989	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
	990	if [[ $remote_host != lctit ]]
	991	then
	992	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
	993	else
	994	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	995	# MIT SSH, DESHALB AUFRUF PER PIPE
	996	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
	997	fi
	998	if [[ $local_host = decalpha ]]
	999	then
	1000	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
	1001	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1002	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1003	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
	1004	/bin/scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
	1005	else
	1006	scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
	1007	fi
[1]	1008
	1009
	1010
[475]	1011	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
	1012	echo " *** untar previous update on remote host, if existing"
	1013	if [[ $remote_host != lctit ]]
	1014	then
	1015	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
	1016	else
	1017	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	1018	# MIT SSH, DESHALB AUFRUF PER PIPE
	1019	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
	1020	fi
[1]	1021
	1022
[475]	1023	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
	1024	echo " *** untar actual sources on remote host"
	1025	if [[ $remote_host != lctit ]]
	1026	then
	1027	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
	1028	else
	1029	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	1030	# MIT SSH, DESHALB AUFRUF PER PIPE
	1031	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
	1032	fi
[1]	1033
	1034
[475]	1035	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1036	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
	1037	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
	1038	# Z.B. DIE PFADE ZUM COMPILER)
	1039	echo " *** execute \"make\" on remote host"
[1]	1040
[493]	1041
	1042	# generate make call with make options
[475]	1043	if [[ $remote_host = nech ]]
	1044	then
	1045	make_call_string="sxmake $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1046	else
	1047	make_call_string="make $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1048	fi
[1]	1049
[493]	1050	# generate command to load modules, if modules are given
	1051	if [[ "$modules" != "" ]]
	1052	then
[678]	1053	if [[ $remote_host = lctit ]]
	1054	then
	1055	module_calls=". $modules"
	1056	else
	1057	module_calls="module load ${modules};"
	1058	fi
[555]	1059
	1060	# bugfix for wrong netcdf module
	1061	if [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
	1062	then
	1063	if [[ $(echo $module_calls \| grep -c netcdf/3.6.3-intel) != 0 ]]
	1064	then
	1065	module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
	1066	fi
	1067	fi
[503]	1068	else
	1069	module_calls=""
[493]	1070	fi
	1071
[693]	1072	if [[ $remote_host = ibmkisti \|\| $remote_host = ibms \|\| $remote_host = ibmy ]]
[475]	1073	then
[1]	1074
[493]	1075	ssh ${remote_username}@${remote_addres} "$module_calls cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1076
[475]	1077	elif [[ $remote_host = ibmh ]]
	1078	then
[1]	1079
[493]	1080	print "$module_calls export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1081
[475]	1082	elif [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
	1083	then
[1]	1084
[622]	1085	# print ". /usr/share/modules/init/bash; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1086	print "eval \`/sw/swdist/bin/modulesinit\`; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1087
[475]	1088	elif [[ $remote_host = lctit ]]
	1089	then
[1]	1090
[475]	1091	echo " " > ${remote_host}_last_make_protokoll
	1092	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
	1093	do
	1094	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1095	done
[1]	1096
[475]	1097	elif [[ $remote_host = lcxt4 ]]
[1]	1098	then
	1099
[691]	1100	ssh ${remote_username}@${remote_addres} ". /opt/modules/default/init/ksh; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1101
[475]	1102	else
[1]	1103
[493]	1104	print "cd $module_calls ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1105
[475]	1106	fi
[1]	1107
[475]	1108	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
	1109	then
	1110	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
	1111	if [[ $silent = false ]]
[40]	1112	then
[475]	1113	answer=dummy
	1114	printf "\n"
	1115	while [[ "$answer" != c && "$answer" != k ]]
[40]	1116	do
[475]	1117	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
	1118	read answer
	1119	if [[ "$answer" = l ]]
	1120	then
	1121	more ${remote_host}_last_make_protokoll
	1122	fi
[40]	1123	done
[475]	1124	if [[ $answer = k ]]
[40]	1125	then
[475]	1126	locat=user_abort; exit
[1]	1127	fi
	1128	fi
[475]	1129	fi
[1]	1130
	1131
	1132
[475]	1133	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
	1134	printf "\n *** tar update on remote host ..."
	1135	if [[ $remote_host != lctit ]]
	1136	then
	1137	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod"
	1138	else
	1139	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	1140	# MIT SSH, DESHALB AUFRUF PER PIPE
	1141	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
	1142	fi
[1]	1143
	1144
[475]	1145	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
	1146	# printf "\n *** \"make clean\" on remote host ..."
	1147	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
	1148	# printf "\n"
[1]	1149
	1150
[25]	1151
	1152
[475]	1153	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
	1154	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	1155	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
	1156	elif [[ $compile_utility_programs = true ]]
	1157	then
	1158
	1159	printf "\n\n"
	1160	echo " *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
	1161	cd ${local_source_path}/../SCRIPTS
	1162
	1163	if [[ $remote_host != lctit ]]
[22]	1164	then
[475]	1165	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
	1166	else
[503]	1167	# TIT ERLAUBT NUR DIE AUSFUEHRUNG GANZ BESTIMMTER KOMMANDOS
[475]	1168	# MIT SSH, DESHALB AUFRUF PER PIPE
	1169	print "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_addres} 2>&1
	1170	fi
[22]	1171
[475]	1172	# KOPIEREN DER SCRIPTE
	1173	if [[ $local_host = decalpha ]]
	1174	then
[503]	1175	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTAENDIGEN PFADES
[475]	1176	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1177	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1178	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
	1179	/bin/scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
	1180	else
	1181	scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
	1182	fi
[22]	1183
[475]	1184	cd - > /dev/null
	1185	cd ${local_source_path}/../UTIL
[22]	1186
[27]	1187
[475]	1188	# KOPIEREN DER UTILITY-PROGRAMME
	1189	if [[ $local_host = decalpha ]]
	1190	then
	1191	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
	1192	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1193	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1194	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
	1195	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
	1196	else
	1197	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
	1198	fi
[27]	1199
	1200
[22]	1201
[475]	1202	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1203	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
	1204	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
	1205	# Z.B. DIE PFADE ZUM COMPILER)
	1206	echo " *** execute \"make\" on remote host"
[22]	1207
[475]	1208	if [[ $remote_host = nech ]]
	1209	then
[503]	1210	make_call_string="sxmake $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
[475]	1211	else
[503]	1212	make_call_string="make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
[475]	1213	fi
[22]	1214
[493]	1215	# generate command to load modules, if modules are given
	1216	if [[ "$modules" != "" ]]
	1217	then
[678]	1218	if [[ $remote_host = lctit ]]
	1219	then
	1220	module_calls=". $modules"
	1221	else
	1222	module_calls="module load ${modules};"
	1223	fi
[562]	1224
	1225	# bugfix for wrong netcdf module
	1226	if [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
	1227	then
	1228	if [[ $(echo $module_calls \| grep -c netcdf/3.6.3-intel) != 0 ]]
	1229	then
	1230	module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
	1231	fi
	1232	fi
[503]	1233	else
	1234	module_calls=""
[493]	1235	fi
	1236
[475]	1237	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
	1238	then
[22]	1239
[493]	1240	ssh ${remote_username}@${remote_addres} "$module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
[22]	1241
[475]	1242	elif [[ $remote_host = ibmh ]]
	1243	then
[22]	1244
[493]	1245	print "$module_calls export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres}
[22]	1246
[475]	1247	elif [[ $remote_host = lctit ]]
	1248	then
[22]	1249
[475]	1250	echo " " > ${remote_host}_last_make_protokoll
	1251	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
	1252	do
[493]	1253	print "$module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[475]	1254	done
[22]	1255
[475]	1256	elif [[ $remote_host = lcxt4 ]]
	1257	then
[22]	1258
[691]	1259	ssh ${remote_username}@${remote_addres} ". /opt/modules/default/init/ksh; $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
[22]	1260
[475]	1261	else
[407]	1262
[493]	1263	print "$module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[407]	1264
[475]	1265	fi
[22]	1266
[475]	1267	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
[22]	1268
[475]	1269	rm -rf ${remote_host}_last_make_protokoll
[22]	1270
[475]	1271	# make on local host
	1272	else
[22]	1273
[544]	1274	# workaround for lcxt4
	1275	if [[ $remote_host = lcxt4 ]]
	1276	then
	1277	. /opt/modules/default/init/ksh
	1278	fi
	1279
	1280	# first load modules, if given
	1281	if [[ "$modules" != "" ]]
	1282	then
[678]	1283	if [[ $remote_host = lctit ]]
	1284	then
	1285	. $modules
	1286	else
	1287	module load ${modules}
	1288	fi
[544]	1289	fi
	1290
	1291
[475]	1292	if [[ $compile_utility_programs = false ]]
	1293	then
[22]	1294
[475]	1295	# DEPOSITORY VERZEICHNIS ERZEUGEN, FALLS NOCH NICHT VORHANDEN
	1296	eval remote_md=$remote_md
	1297	if [[ ! -d $remote_md ]]
[40]	1298	then
[475]	1299	if mkdir $remote_md
[215]	1300	then
[475]	1301	printf "\n\n *** directory for make depository:"
	1302	printf "\n $remote_md"
	1303	printf "\n was created\n"
	1304	else
	1305	printf "\n +++ directory for make depository:"
	1306	printf "\n $remote_md"
	1307	printf "\n cannot be created"
	1308	locat=local_depository_path; exit
[215]	1309	fi
[475]	1310	fi
[215]	1311
[475]	1312	# QUELLTEXT-DATEIEN AUS REPOSITORY INS DEPOSITORY KOPIEREN
	1313	echo " "
	1314	echo " *** updating sources in $remote_md"
	1315	cd $remote_md
	1316	cp $local_source_path/${mainprog}_sources.tar .
	1317	tar xf ${mainprog}_sources.tar
[215]	1318
[475]	1319	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
	1320	echo " "
	1321	echo " *** execute \"make\" on local host"
[1]	1322
[475]	1323	make $make_options PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
[40]	1324
[475]	1325	if [[ $? != 0 ]]
	1326	then
	1327	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
	1328	if [[ $silent = false ]]
[1]	1329	then
[475]	1330	answer=dummy
	1331	printf "\n"
	1332	while [[ "$answer" != c && "$answer" != k ]]
	1333	do
	1334	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
	1335	read answer
	1336	if [[ "$answer" = l ]]
[1]	1337	then
[475]	1338	more ${remote_host}_last_make_protokoll
[1]	1339	fi
[475]	1340	done
	1341	if [[ $answer = k ]]
	1342	then
	1343	locat=user_abort; exit
[1]	1344	fi
	1345	fi
[475]	1346	fi
[1]	1347
	1348
[503]	1349	# TAR NEW VERSION ON LOCAL HOST
[475]	1350	printf "\n *** tar update on local host ..."
	1351	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
[1]	1352
[22]	1353
[475]	1354	# COMPILE THE UTILITY PROGRAMS
	1355	elif [[ $compile_utility_programs = true ]]
	1356	then
	1357	printf "\n\n"
	1358	echo " *** compiling the utility programs ..."
	1359	cd ${local_source_path}/../UTIL
[503]	1360
	1361	# TOUCH FILES IN ORDER TO FORCE COMPILATION FOR EVERY BLOCK
	1362	touch *.f90
	1363	make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
[475]	1364	cd - > /dev/null
[1]	1365	fi
	1366
	1367	fi
[475]	1368
[1]	1369	done
	1370
	1371
	1372	if [[ $host_found = false ]]
	1373	then
	1374	if [[ $host = all ]]
	1375	then
	1376	printf "\n +++ no hosts found in configuration file"
	1377	else
	1378	printf "\n +++ host \"$host\" not found in configuration file"
	1379	fi
	1380	locat=config_file; exit
	1381	fi
	1382
	1383
	1384
[503]	1385	# FINAL WORK
[1]	1386	rm -f hosts_found_in_config_file
	1387

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |