Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 757

Last change on this file since 757 was 740, checked in by raasch, 13 years ago
HLRN access via hicegate0 (130.75.4.101)
Property svn:keywords set to `Id Rev`
File size: 48.4 KB

Rev	Line
[1]	1	#!/bin/ksh
[503]	2	# mbuild - script for compiling the PALM code and its utility programs
[169]	3	# $Id: mbuild 740 2011-08-17 14:54:23Z helmke $
[1]	4
[503]	5	# Procedure to compile code on local and remote hosts using the
	6	# make-mechanism. The source code must be provided on the local host.
[1]	7
[503]	8	# Last changes:
	9	# 06/05/02 - Siggi - start development
	10	# 12/06/02 - Siggi - first version finished
	11	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) included
	12	# 19/12/02 - Siggi - ibmb included
[1]	13	# 05/02/03 - Siggi - hostname nobela included
	14	# 04/03/03 - Siggi - host nech included
	15	# 06/03/03 - Siggi - make_call_string is echoed without '' to
	16	# file LAST_MAKE_CALL (otherwise error on NEC, because
	17	# '' are part of compiler options
	18	# 16/03/03 - Siggi - Two underscores are placed in front of every define
	19	# string, in case that palm.f90 version contains
	20	# such strings
	21	# 16/04/03 - Siggi - First extensions for linux machines
	22	# 24/06/03 - Siggi - host orkan included
	23	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
	24	# 24/07/03 - Siggi - host maestro admitted
	25	# 06/08/03 - Siggi - host gregale admitted
	26	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
	27	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
	28	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
	29	# (-D$OMP=OMP) in order to avoid problems with
	30	# OMP_NUM_THREADS
	31	# 09/01/04 - Siggi - action above cancelled
	32	# 28/01/04 - Siggi - action above re-cancelled
	33	# 08/03/04 - Siggi - host scirocco admitted
	34	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
	35	# the respective .f90 file is not listed in the makefile
	36	# and deletion is demanded by the user
	37	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
	38	# due to error in ssh installation (otherwise a prompt
	39	# for the password appears)
	40	# 23/07/04 - Siggi - changes due to the new berni configuration
	41	# (federation switch)
	42	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
	43	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
	44	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
	45	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
	46	# 24/04/05 - Siggi - netcdf support on lcmuk
	47	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
	48	# 12/05/05 - Siggi - netcdf support on ibm
	49	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
	50	# 18/05/05 - Siggi - netcdf support on nec
	51	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
	52	# 23/05/05 - Siggi - netcdf support on ibms
	53	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
	54	# 30/06/05 - Siggi - netcdf support on bora
	55	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
	56	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
	57	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
	58	# host gfdl5 (ibmy) admitted
	59	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
	60	# 20/01/06 - Siggi - cpp directive for ibmy
	61	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
	62	# 10/02/06 - Siggi - modifications for scp on decalpha
	63	# 13/04/06 - Siggi - ostria admitted
	64	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
	65	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
	66	# 29/05/05 - Siggi - atmos (lcide) admitted
	67	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
	68	# 24/11/06 - Siggi - breva and levanto admitted
	69	# 07/02/07 - Siggi - adapted for RIAM (neck)
[5]	70	# 10/02/07 - Siggi - all hpmuk-related code removed
[40]	71	# 02/03/07 - Siggi - compilation of utility programs and transfer of
[27]	72	# scripts to remote hosts added (option -u)
[66]	73	# 14/03/07 - Siggi - fimm admitted, revision number added to terminal
	74	# output
[69]	75	# 16/03/07 - Siggi - adjustments (netcdf) for lctit
	76	# adjustments for running under pdksh, local ip-addres
	77	# is not determined any more
[82]	78	# 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
	79	# from configuration file
	80	# host identifier (local_host) is read from config file
[116]	81	# 10/10/07 - Siggi - bugfix: handling of comment lines
[181]	82	# 18/07/08 - Siggi - adapted for lcsgih
	83	# 21/07/08 - Siggi - mainprog (executable) is added to the tar-file
	84	# ({mainprog}_current_version)
[206]	85	# 02/10/08 - Siggi - adapted for lcxt4
[215]	86	# 14/11/08 - Siggi - update mechanism completely revised: source tarfile
	87	# remains in source directory, one depository per block
[266]	88	# (given in the config-file) is created, allways all
	89	# files from the source directory are copied to the
	90	# respective depository, no additional file checks are
	91	# done any more (version 2.1)
[224]	92	# 13/01/09 - Marcus- re-enable compilation more than once on lcmuk (as on
	93	# other machines)
[266]	94	# 21/03/09 - Siggi - -u copies also copies process_dvr_output and
	95	# .dvrserver.config
[305]	96	# 21/04/09 - Siggi - adjustments for new IBM at DKRZ, which is now ibmh
[367]	97	# 25/08/09 - BjornM- adapted for lck
[407]	98	# 01/12/09 - BjornM- re-adjustments for lcxt4
[437]	99	# 01/02/10 - Siggi - adjustments for lcxt5m
[475]	100	# 03/02/10 - Siggi - make options (mopts) to be set by configuration file
	101	# implemented, remoted mode option -r completely
	102	# removed, t3e related parts removed
[492]	103	# 26/02/10 - BjornM- re-adjustments for lcxt4 (new modules)
[493]	104	# 01/03/10 - Siggi - mpilib replaced by modules: explicit module settings
	105	# removed; modules should now be given in the
	106	# configuration file
[503]	107	# 02/03/10 - Siggi - utility programs are created separately for each
	108	# block in the configuration file,
	109	# parallel make for utility programs
[508]	110	# 12/03/10 - Siggi - bugfix: remode_md was given a wrong value
[544]	111	# 16/08/10 - BjornM- bugfix: call of modules on local host, new workaround
	112	# for lcxt4
[555]	113	# 07/09/10 - Siggi - bugfix for wrong netcdf/3.6.3 module on lcsgi
[622]	114	# 08/12/10 - Siggi - initialization of the module command changed for
	115	# SGI-ICE/lcsgi
	116	# adjustments for Kyushu Univ. (lcrte, ibmku)
[635]	117	# 14/12/10 - Siggi - adjustments for new Tsubame system at Tokyo
	118	# institute of technology (lctit)
[693]	119	# 04/03/11 - BjornM- re-adjustments for lcxt4
	120	# 06/03/11 - Siggi - adjustments for ibmkisti
[717]	121	# 03/04/11 - Micha - added lckordi
[740]	122	# 17/08/11 - Siggi - HLRN access via hicegate0 (130.75.4.101)
[1]	123
	124
[508]	125
[503]	126	# VARIABLE DECLARATIONS + DEFAULT VALUES
[22]	127	compile_utility_programs=false
[1]	128	config_file=.mrun.config
[67]	129	fimm=false
[1]	130	host=all
	131	host_found=false
	132	locat=normal
	133	makefile=""
[493]	134	module_calls=""
[1]	135	scirocco=false
	136	silent=false
	137	suf=f90
	138	update=false
[83]	139	working_directory=`pwd`
[1]	140
	141	typeset -i ih ihost=0
	142
[66]	143	typeset -R30 calltime
[1]	144	typeset -L20 column1
	145	typeset -L50 column2
	146	typeset -L70 column3
[215]	147	typeset -L40 version="MBUILD 2.1 Rev$Rev: 740 $"
[1]	148
[503]	149	# ERROR HANDLING
	150	# IN CASE OF EXIT:
[83]	151	trap 'rm -rf $working_directory/tmp_mbuild
[69]	152	if [[ $locat != normal ]]
[1]	153	then
	154	printf "\n\n +++ mbuild killed \n\n"
	155	else
	156	printf "\n\n *** mbuild finished \n\n"
	157	fi' exit
	158
	159
[503]	160	# IN CASE OF TERMINAL-BREAK:
[83]	161	trap 'rm -rf $working_directory/tmp_mbuild
[69]	162	printf "\n\n +++ mbuild killed by \"^C\" \n\n"
[1]	163	exit
	164	' 2
	165
	166
[215]	167	tmp_mbuild=${working_directory}/tmp_mbuild
[1]	168
[503]	169	# READ SHELLSCRIPT-OPTIONS
[475]	170	while getopts :c:h:m:s:u option
[1]	171	do
	172	case $option in
	173	(c) config_file=$OPTARG;;
	174	(h) host=$OPTARG;;
	175	(m) makefile=$OPTARG;;
	176	(s) suf=$OPTARG;;
[22]	177	(u) compile_utility_programs=true;;
[1]	178	(\?) printf "\n +++ unknown option $OPTARG \n";
	179	locat=parameter; exit;;
	180	esac
	181	done
	182
	183
	184
[503]	185	# CHECK, IF CONFIGURATION-FILE EXISTS
[82]	186	if [[ ! -f $config_file ]]
	187	then
	188	printf "\n +++ configuration file: "
	189	printf "\n $config_file"
	190	printf "\n does not exist"
	191	locat=configuration; exit
	192	fi
	193
	194
	195
[503]	196	# DETERMINE THE LOCAL HOST
[1]	197	local_host_real_name=$(hostname)
[69]	198	# local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
	199
[1]	200
[82]	201
[503]	202	# DETERMINE HOST-IDENTIFIER (local_host) FROM THE CONFIG-FILE
[82]	203	line=""
[215]	204	grep "%host_identifier" $config_file > $tmp_mbuild
[82]	205	while read line
	206	do
[116]	207	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
[82]	208	then
	209	HOSTNAME=`echo $line \| cut -d" " -s -f2`
	210	host_identifier=`echo $line \| cut -d" " -s -f3`
[83]	211	if [[ $local_host_real_name = $HOSTNAME ]]
[82]	212	then
	213	local_host=$host_identifier
	214	break
	215	fi
	216	fi
[215]	217	done < $tmp_mbuild
[82]	218
	219	if [[ "$local_host" = "" ]]
	220	then
	221	printf "\n +++ no host identifier found in configuration file \"$config_file\""
	222	printf "\n for local host \"$local_host_real_name\"."
	223	printf "\n Please add line"
	224	printf "\n \"\%host_identifier $local_host_real_name <identifier>\""
	225	printf "\n to the configuration file."
	226	locat=local_host; exit
	227	fi
	228
	229
	230
[1]	231	[[ $local_host_real_name = scirocco ]] && scirocco=true
[67]	232	[[ $local_host_real_name = fimm.bccs.uib.no ]] && fimm=true
[1]	233
	234
	235
	236	if [[ $local_host != ibms ]]
	237	then
	238	config_file=$PWD/$config_file
	239	else
	240	config_file=`pwd`/$config_file
	241	fi
	242
	243
	244
[503]	245	# DETERMINE USER NAME ON LOCAL HOST FROM THE CONFIG-FILE
[1]	246	line=""
[215]	247	grep " $local_host" $config_file \| grep "%remote_username" > $tmp_mbuild
[69]	248	while read line
[1]	249	do
[116]	250	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
[1]	251	then
	252	local_username=`echo $line \| cut -d" " -s -f2`
	253	fi
[215]	254	done < $tmp_mbuild
[1]	255
[82]	256
[1]	257	if [[ "$local_username" = "" ]]
	258	then
	259	printf "\n +++ no user name found in configuration file"
	260	printf "\n for local host \"$local_host\" "
	261	locat=config_file; exit
	262	fi
	263
	264
[503]	265	# DETERMINE LOCAL SOURCE-CODE PATH.
	266	# FIRST CHECK, IF A GLOBAL SOURCE-CODE PATH HAS BEEN DECLARED FOR ALL HOSTS.
	267	# THEREFORE, FIRST SET ALL GLOBAL VARIABLES DECLARED IN THE CONFIG-FILE,
	268	# BECAUSE THEY MAY BE USED AS PART OF THE PATH NAME.
[5]	269	line=""
[215]	270	grep "%" $config_file > $tmp_mbuild
[69]	271	while read line
[5]	272	do
[116]	273	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" && $(echo $line \| cut -c1) != "#" ]]
[1]	274	then
[5]	275	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
	276	value=`echo $line \| cut -d" " -s -f2`
[8]	277	eval export $var=\$value
[1]	278	fi
[215]	279	done < $tmp_mbuild
[1]	280
[503]	281	# NOW CHECK, IF A GLOBAL SOURCE-CODE-PATH HAS BEEN DECLARED
[1]	282	line=""
[215]	283	grep "%source_path" $config_file > $tmp_mbuild
[69]	284	while read line
[1]	285	do
	286	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	287	then
	288	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
	289	then
	290	global_source_path=`echo $line \| cut -d" " -s -f2`
	291	fi
	292	fi
[215]	293	done < $tmp_mbuild
[1]	294
	295	line=""
[215]	296	grep " $local_host" $config_file \| grep "%source_path" > $tmp_mbuild
[69]	297	while read line
[1]	298	do
	299	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	300	then
	301	local_source_path=`echo $line \| cut -d" " -s -f2`
	302	fi
[215]	303	done < $tmp_mbuild
[1]	304
	305	if [[ "$local_source_path" = "" ]]
	306	then
	307	if [[ "$global_source_path" != "" ]]
	308	then
	309	local_source_path=$global_source_path
	310	else
	311	printf "\n +++ no source path found in configuration file"
	312	printf "\n for local host \"$local_host\" "
	313	printf "\n please set \"\%source_path\" in configuration file"
	314	locat=config_file; exit
	315	fi
	316	fi
	317	eval local_source_path=$local_source_path
[8]	318	eval local_source_path=$local_source_path
[1]	319
	320
[215]	321
[503]	322	# DETERMINE GLOBAL DEPOSITORY-PATH
[1]	323	line=""
[215]	324	grep "%depository_path" $config_file > $tmp_mbuild
[69]	325	while read line
[1]	326	do
	327	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	328	then
	329	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
	330	then
	331	global_depository_path=`echo $line \| cut -d" " -s -f2`
	332	fi
	333	fi
[215]	334	done < $tmp_mbuild
[1]	335
	336
	337
[503]	338	# CHECK, IF A MAIN PROGRAM HAS BEEN DEFINED IN THE CONFIG-FILE
[5]	339	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
	340	then
	341	printf "\n +++ no main program or more than one main program defined"
	342	printf "\n in configuration file"
	343	locat=configuration; exit
	344	else
	345	line=`grep "%mainprog" $config_file`
	346	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
	347	then
	348	printf "\n +++ no main program defined in configuration file"
	349	locat=configuration; exit
	350	fi
	351	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
	352	fi
	353
	354
	355
[503]	356	# CHECK IF MAKEFILE EXITS
[1]	357	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
	358	if [[ ! -f $makefile ]]
	359	then
	360	printf "\n +++ makefile: "
	361	printf "\n $makefile"
	362	printf "\n does not exist"
	363	locat=makefile; exit
	364	fi
	365
	366
[503]	367	# HEADER-OUTPUT (PART1: MESSAGES CONCERNING THE LOCAL HOST)
[1]	368	calltime=$(date)
	369	printf "\n"
	370	printf "#------------------------------------------------------------------------# \n"
	371	printf "\| $version$calltime \| \n"
	372	printf "\| \| \n"
	373	column1="called on:"; column2=$local_host_real_name
	374	printf "\| $column1$column2 \| \n"
	375	column1="local username:"; column2=$local_username
	376	printf "\| $column1$column2 \| \n"
	377	column1="local IP-addres:"; column2=$local_addres
	378	printf "\| $column1$column2 \| \n"
	379	column1="config file:"; column2=$config_file
	380	printf "\| $column1$column2 \| \n"
	381	column1="makefile:"; column2=$makefile
	382	printf "\| $column1$column2 \| \n"
	383	column1="local source path:"; column2=$local_source_path
	384	printf "\| $column1$column2 \| \n"
	385	printf "#------------------------------------------------------------------------# \n"
	386
	387	# printf "\| \| \n"
	388
	389
[40]	390	if [[ $compile_utility_programs = false ]]
	391	then
[1]	392
[503]	393	# IN ANY CASE, GIVE ALL FILES WRITE-PERMIT, IN ORDER TO AVOID PROBLEMS
	394	# WITH OVERWRITING FILES ON THE REMOTE HOST
[215]	395	cd $local_source_path
	396	printf "\n\n *** tar of makefile and source files in $local_source_path"
[40]	397	tar -cf ${mainprog}_sources.tar Makefile *.$suf
	398	printf "\n"
[1]	399
[40]	400	fi
[1]	401
	402
[40]	403
[503]	404	# GET CONFIRMATION TO CONTINUE
[1]	405	if [[ $host = all ]]
	406	then
	407	printf "\n *** updates will be made for ALL hosts found in"
	408	printf "\n the configuration file"
	409	else
	410	printf "\n *** update will be made for host \"$host\" "
	411	fi
	412
	413	if [[ $silent = false ]]
	414	then
	415	answer=dummy
	416	printf "\n\n"
	417	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
	418	do
	419	printf " >>> continue (y/n) ? "
	420	read answer
	421	done
	422	if [[ $answer = n \|\| $answer = N ]]
	423	then
	424	locat=user_abort; exit
	425	fi
	426	fi
	427
	428
	429
	430
	431	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
	432	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
	433	printf "\n *** scanning configuration file for host(s) ..."
	434
[215]	435	grep %fopts $config_file > $tmp_mbuild
[69]	436	while read line
[1]	437	do
	438	# KOMMENTARZEILEN UEBERSPRINGEN
	439	[[ $(echo $line \| cut -c1) = "#" ]] && continue
	440	(( ihost = ihost + 1 ))
	441	hostline[$ihost]="$line"
[215]	442	done < $tmp_mbuild
[1]	443
	444
	445	while (( ih < ihost ))
	446	do
	447
	448	(( ih = ih + 1 ))
	449
	450	# REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
	451	# NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
	452	# SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
	453	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
	454	remote_host=`echo $remote_host_string \| cut -d" " -f1`
	455	if [[ $host != all ]]
	456	then
	457	[[ $remote_host != $host ]] && continue
	458	fi
	459	host_found=true
	460	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
	461	if [[ $condition1 = $remote_host ]]
	462	then
	463	condition1=""
	464	else
	465	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
	466	fi
	467
[493]	468	modules=""
[82]	469	netcdf_inc=""
	470	netcdf_lib=""
[1]	471
	472	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
	473	case $remote_host in
[717]	474	(lckordi) remote_adress=210.219.61.8;;
[116]	475	(lcmuk) remote_addres=130.75.105.2;;
[622]	476	(lcrte) remote_addres=133.5.185.60;;
[181]	477	(lcsgib) remote_addres=130.73.232.102;;
[740]	478	(lcsgih) remote_addres=130.75.4.101;;
[367]	479	(lck) remote_addres=165.132.26.61;;
[635]	480	(lctit) remote_addres=10.1.6.170;;
[206]	481	(lcxt4) remote_addres=129.177.20.113;;
[437]	482	(lcxt5m) remote_addres=193.166.211.144;;
[83]	483	(decalpha) remote_addres=165.132.26.56;;
[305]	484	(ibmh) remote_addres=136.172.40.15;;
[693]	485	(ibmkisti) remote_addres=150.183.146.24;;
[622]	486	(ibmku) remote_addres=133.5.4.129;;
[83]	487	(ibms) remote_addres=150.183.5.101;;
	488	(ibmy) remote_addres=165.132.26.58;;
	489	(nech) remote_addres=136.172.44.192;;
	490	(neck) remote_addres=133.5.178.11;;
	491	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
	492	(*) if [[ $local_host != $remote_host ]]
[1]	493	then
[83]	494	printf "\n +++ remote host \"$remote_host\" unknown";
[503]	495	printf "\n please inform PALM group support!"
[1]	496	fi;;
	497	esac
	498
	499
	500	# REMOTE-USERNAMEN ERMITTELN
	501	line=""
[116]	502	found=false
[215]	503	grep "$remote_host_string" $config_file \| grep "%remote_username" > $tmp_mbuild
[69]	504	while read line1
[1]	505	do
[116]	506
[1]	507	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	508	then
	509	line="$line1"
	510	fi
[116]	511
	512	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	513	then
	514	remote_username=`echo $line \| cut -d" " -s -f2`
	515	found=true
	516	fi
	517
[215]	518	done < $tmp_mbuild
[1]	519
[116]	520	if [[ $found = false ]]
[1]	521	then
	522	printf "\n +++ no remote username found in configuration file"
	523	printf "\n for \"$remote_host_string\" "
	524	locat=config_file; exit
	525	fi
	526
	527
	528	# REMOTE-QUELLTEXTPFAD ERMITTELN
	529	line=""
[54]	530	remote_source_path=""
[215]	531	grep "$remote_host_string" $config_file \| grep "%source_path" > $tmp_mbuild
[69]	532	while read line1
[1]	533	do
[116]	534
[1]	535	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	536	then
	537	line="$line1"
	538	fi
[116]	539
	540	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	541	then
	542	remote_source_path=`echo $line \| cut -d" " -s -f2`
	543	fi
	544
[215]	545	done < $tmp_mbuild
[1]	546
	547	if [[ "$remote_source_path" = "" ]]
	548	then
	549	if [[ "$global_source_path" != "" ]]
	550	then
	551	remote_source_path=$global_source_path
	552	else
	553	printf "\n +++ no source path found in configuration file"
	554	printf "\n for \"$remote_host_string\" "
	555	locat=config_file; exit
	556	fi
	557	fi
	558
[22]	559	remote_ud=${remote_source_path}/../UTIL
[24]	560	remote_ud=$(eval echo $remote_ud)
[1]	561
[54]	562
[1]	563	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
[54]	564	remote_md=""
[1]	565	line=""
[215]	566	grep "$remote_host_string" $config_file \| grep "%depository_path" > $tmp_mbuild
[69]	567	while read line1
[1]	568	do
[116]	569
[1]	570	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	571	then
	572	line="$line1"
	573	fi
[116]	574
	575	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	576	then
	577	remote_md=`echo $line \| cut -d" " -s -f2`
	578	fi
	579
[215]	580	done < $tmp_mbuild
[1]	581
	582	if [[ "$remote_md" = "" ]]
	583	then
	584	if [[ "$global_depository_path" != "" ]]
	585	then
	586	remote_md=$global_depository_path
	587	else
	588	printf "\n +++ no depository path found in configuration file"
	589	printf "\n for \"$remote_host_string\" "
	590	printf "\n please set \"\%depository_path\" in configuration file"
	591	locat=config_file; exit
	592	fi
	593	fi
	594
[8]	595	remote_md=$(eval echo $remote_md)
[503]	596	block=""
	597	[[ "$condition1" != "" ]] && block=_$condition1
	598	[[ "$condition2" != "" ]] && block=${block}_$condition2
[508]	599	remote_md=${remote_md}$block
[1]	600
[8]	601
[1]	602	# COMPILERNAMEN ERMITTELN
	603	line=""
[116]	604	found=false
[215]	605	grep "$remote_host_string" $config_file \| grep "%compiler_name " > $tmp_mbuild
[69]	606	while read line1
[1]	607	do
[116]	608
[1]	609	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	610	then
	611	line="$line1"
	612	fi
[116]	613
	614	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	615	then
	616	compiler_name=`echo $line \| cut -d" " -s -f2`
	617	found=true
	618	fi
	619
[215]	620	done < $tmp_mbuild
[1]	621
[116]	622	if [[ $found = false ]]
[1]	623	then
	624	printf "\n +++ no compiler name found in configuration file"
	625	printf "\n for \"$remote_host_string\" "
	626	locat=config_file; exit
	627	fi
	628
	629
[27]	630	# BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
	631	# SERIELLER COMPILERNAME ERMITTELT WERDEN
	632	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
	633	then
	634	line=""
[116]	635	found=false
[215]	636	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" > $tmp_mbuild
[69]	637	while read line1
[27]	638	do
[116]	639
[27]	640	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	641	then
	642	line="$line1"
	643	fi
[116]	644
	645	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	646	then
	647	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
	648	found=true
	649	fi
	650
[215]	651	done < $tmp_mbuild
[1]	652
[116]	653	if [[ $found = false ]]
[27]	654	then
[28]	655	printf "\n +++ no serial compiler name found in configuration file"
[27]	656	printf "\n for \"$remote_host_string\" "
	657	locat=config_file; exit
	658	fi
	659	else
	660	compiler_name_ser=$compiler_name
	661	fi
	662
	663
	664
[82]	665	# PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
	666	line=""
[116]	667	found=false
[215]	668	grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
[82]	669	while read line1
	670	do
[116]	671
[82]	672	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	673	then
	674	line="$line1"
	675	fi
[116]	676
	677	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	678	then
	679	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	680	cpp_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	681	found=true
	682	fi
	683
[215]	684	done < $tmp_mbuild
[116]	685
	686	if [[ $found = false ]]
[82]	687	then
	688	printf "\n +++ no preprocessor options found in configuration file"
	689	printf "\n for \"$remote_host_string\" "
	690	locat=config_file; exit
	691	fi
	692
[116]	693
[82]	694	# RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
	695	for string in $remote_host_string
	696	do
	697	if [[ $(echo $remote_host \| cut -c1-2) = lc && $(echo $string \| cut -c1-2) = lc ]]
	698	then
	699	cpp_options="$cpp_options -D__lc "
[83]	700	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $(echo $string \| cut -c1-3) = ibm ]]
	701	then
	702	cpp_options="${cpp_options},-D__ibm"
	703	elif [[ $(echo $remote_host \| cut -c1-3) = nec && $(echo $string \| cut -c1-3) = nec ]]
	704	then
	705	cpp_options="${cpp_options} -D__nec"
[82]	706	else
[83]	707	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
	708	then
	709	cpp_options="${cpp_options},-D__$string"
	710	else
	711	cpp_options="$cpp_options -D__$string "
	712	fi
[82]	713	fi
	714	done
	715
	716
	717
	718	# NETCDF-OPTIONEN ERMITTELN
	719	line=""
[215]	720	grep "$remote_host_string" $config_file \| grep "%netcdf_inc" > $tmp_mbuild
[82]	721	while read line1
	722	do
[116]	723
[82]	724	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	725	then
	726	line="$line1"
	727	fi
[116]	728
	729	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	730	then
	731	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	732	netcdf_inc=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	733	fi
	734
[215]	735	done < $tmp_mbuild
[82]	736
	737	line=""
[215]	738	grep "$remote_host_string" $config_file \| grep "%netcdf_lib" > $tmp_mbuild
[82]	739	while read line1
	740	do
[116]	741
[82]	742	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	743	then
	744	line="$line1"
	745	fi
[116]	746
	747	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	748	then
	749	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	750	netcdf_lib=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	751	fi
	752
[215]	753	done < $tmp_mbuild
[82]	754
	755
	756
[475]	757	# get make options
	758	line=""
	759	found=false
	760	grep "$remote_host_string" $config_file \| grep "%mopts" > $tmp_mbuild
	761	while read line1
	762	do
	763
	764	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	765	then
	766	line="$line1"
	767	fi
	768
	769	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	770	then
	771	# remove colons from directive string
	772	make_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	773
	774	fi
	775
	776	done < $tmp_mbuild
	777
	778
	779
[1]	780	# COMPILEROPTIONEN ERMITTELN
	781	line=""
[116]	782	found=false
[215]	783	grep "$remote_host_string" $config_file \| grep "%fopts" > $tmp_mbuild
[69]	784	while read line1
[1]	785	do
[116]	786
[1]	787	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	788	then
	789	line="$line1"
	790	fi
[116]	791
	792	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	793	then
	794	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	795	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	796	found=true
	797
	798	# NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
	799	compiler_options="$compiler_options $netcdf_inc"
	800	fi
	801
[215]	802	done < $tmp_mbuild
[116]	803
	804	if [[ $found = false ]]
[1]	805	then
	806	printf "\n +++ no compiler options found in configuration file"
	807	printf "\n for \"$remote_host_string\" "
	808	locat=config_file; exit
	809	fi
[82]	810
[1]	811
	812
[503]	813	# get modules to be loaded
[221]	814	line=""
[493]	815	grep "$remote_host_string" $config_file \| grep "%modules" > $tmp_mbuild
[221]	816	while read line1
	817	do
	818
	819	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	820	then
	821	line="$line1"
	822	fi
	823
	824	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	825	then
	826	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
[493]	827	modules=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
[221]	828	fi
	829
	830	done < $tmp_mbuild
	831
	832
	833
	834
[1]	835	# LADER-OPTIONEN ERMITTELN
	836	line=""
[116]	837	found=false
[215]	838	grep "$remote_host_string" $config_file \| grep "%lopts" > $tmp_mbuild
[69]	839	while read line1
[1]	840	do
[116]	841
[1]	842	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	843	then
	844	line="$line1"
	845	fi
[116]	846
	847	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	848	then
	849	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	850	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	851	found=true
	852
	853	# NETCDF-LIBRARY HINZUFUEGEN
	854	loader_options="$loader_options $netcdf_lib"
	855	fi
	856
[215]	857	done < $tmp_mbuild
[1]	858
[116]	859	if [[ $found = false ]]
[1]	860	then
	861	printf "\n +++ no loader options found in configuration file"
	862	printf "\n for \"$remote_host_string\" "
	863	locat=config_file; exit
	864	fi
[82]	865
[1]	866
	867	printf "\n\n#------------------------------------------------------------------------# \n"
	868	if [[ $remote_host = $local_host ]]
	869	then
	870	column1="remote_host:"; column2="$remote_host (= local host!)"
	871	else
	872	column1="remote_host:"; column2=$remote_host
	873	fi
	874	printf "\| $column1$column2 \| \n"
	875	printf "\| \| \n"
	876	column1="conditions:"; column2="$condition1 $condition2"
	877	printf "\| $column1$column2 \| \n"
	878	column1="make depository:"; column2=$remote_md
	879	printf "\| $column1$column2 \| \n"
[215]	880	line=$(echo "$remote_md" \| cut -c51-)
	881	while [[ "$line" != "" ]]
	882	do
	883	column1=""
	884	column2=$line
	885	printf "\| $column1$column2 \| \n"
	886	line=$(echo "$line" \| cut -c51-)
	887	done
[25]	888	if [[ $compile_utility_programs = true ]]
	889	then
	890	column1="utility directory:"; column2=$remote_ud
	891	printf "\| $column1$column2 \| \n"
	892	fi
[1]	893	column1="username:"; column2=$remote_username
	894	printf "\| $column1$column2 \| \n"
	895	column1="addres:"; column2=$remote_addres
	896	printf "\| $column1$column2 \| \n"
	897	column1="compiler:"; column2=$compiler_name
	898	printf "\| $column1$column2 \| \n"
[28]	899	if [[ $compile_utility_programs = true ]]
	900	then
	901	column1="serial compiler:"; column2=$compiler_name_ser
	902	printf "\| $column1$column2 \| \n"
	903	fi
[475]	904	if [[ "$make_options" != "" ]]
	905	then
	906	column1="make options:"; column2=$make_options
	907	printf "\| $column1$column2 \| \n"
	908	fi
[1]	909	column1="cpp options:"; column2=$cpp_options
	910	printf "\| $column1$column2 \| \n"
	911	line=$(echo "$cpp_options" \| cut -c51-)
	912	while [[ "$line" != "" ]]
	913	do
	914	column1=""
	915	column2=$line
	916	printf "\| $column1$column2 \| \n"
	917	line=$(echo "$line" \| cut -c51-)
	918	done
	919	column1="compiler options:"; column2=$compiler_options
	920	printf "\| $column1$column2 \| \n"
	921	line=$(echo "$compiler_options" \| cut -c51-)
	922	while [[ "$line" != "" ]]
	923	do
	924	column1=""
	925	column2=$line
	926	printf "\| $column1$column2 \| \n"
	927	line=$(echo "$line" \| cut -c51-)
	928	done
	929	column1="loader options:"; column2=$loader_options
	930	printf "\| $column1$column2 \| \n"
	931	line=$(echo "$loader_options" \| cut -c51-)
	932	while [[ "$line" != "" ]]
	933	do
	934	column1=""
	935	column2=$line
	936	printf "\| $column1$column2 \| \n"
	937	line=$(echo "$line" \| cut -c51-)
	938	done
[493]	939	if [[ $modules != "" ]]
	940	then
	941	column1="modules to be load:"; column2=$modules
	942	printf "\| $column1$column2 \| \n"
	943	line=$(echo "$modules" \| cut -c51-)
	944	while [[ "$line" != "" ]]
	945	do
	946	column1=""
	947	column2=$line
	948	printf "\| $column1$column2 \| \n"
	949	line=$(echo "$line" \| cut -c51-)
	950	done
	951	fi
[1]	952	printf "#------------------------------------------------------------------------# \n"
	953
	954	if [[ $silent = false ]]
	955	then
	956	answer=dummy
	957	printf "\n\n"
	958	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
	959	do
	960	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
	961	read answer
	962	done
	963	if [[ $answer = a \|\| $answer = A ]]
	964	then
	965	locat=user_abort; exit
	966	fi
	967	if [[ $answer = c \|\| $answer = C ]]
	968	then
[503]	969	silent=true
[1]	970	fi
	971	if [[ $answer = s \|\| $answer = S ]]
	972	then
	973	continue
	974	fi
	975	fi
	976
	977
[475]	978	# make on remote host
	979	if [[ $remote_host != $local_host ]]
[1]	980	then
	981
[475]	982	if [[ $compile_utility_programs = false ]]
[1]	983	then
	984
[475]	985	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	986	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
	987	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
	988	if [[ $remote_host != lctit ]]
	989	then
	990	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
	991	else
	992	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	993	# MIT SSH, DESHALB AUFRUF PER PIPE
	994	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
	995	fi
	996	if [[ $local_host = decalpha ]]
	997	then
	998	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
	999	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1000	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1001	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
	1002	/bin/scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
	1003	else
	1004	scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
	1005	fi
[1]	1006
	1007
	1008
[475]	1009	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
	1010	echo " *** untar previous update on remote host, if existing"
	1011	if [[ $remote_host != lctit ]]
	1012	then
	1013	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
	1014	else
	1015	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	1016	# MIT SSH, DESHALB AUFRUF PER PIPE
	1017	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
	1018	fi
[1]	1019
	1020
[475]	1021	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
	1022	echo " *** untar actual sources on remote host"
	1023	if [[ $remote_host != lctit ]]
	1024	then
	1025	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
	1026	else
	1027	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	1028	# MIT SSH, DESHALB AUFRUF PER PIPE
	1029	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
	1030	fi
[1]	1031
	1032
[475]	1033	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1034	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
	1035	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
	1036	# Z.B. DIE PFADE ZUM COMPILER)
	1037	echo " *** execute \"make\" on remote host"
[1]	1038
[493]	1039
	1040	# generate make call with make options
[475]	1041	if [[ $remote_host = nech ]]
	1042	then
	1043	make_call_string="sxmake $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1044	else
	1045	make_call_string="make $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1046	fi
[1]	1047
[493]	1048	# generate command to load modules, if modules are given
	1049	if [[ "$modules" != "" ]]
	1050	then
[678]	1051	if [[ $remote_host = lctit ]]
	1052	then
	1053	module_calls=". $modules"
	1054	else
	1055	module_calls="module load ${modules};"
	1056	fi
[555]	1057
	1058	# bugfix for wrong netcdf module
	1059	if [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
	1060	then
	1061	if [[ $(echo $module_calls \| grep -c netcdf/3.6.3-intel) != 0 ]]
	1062	then
	1063	module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
	1064	fi
	1065	fi
[503]	1066	else
	1067	module_calls=""
[493]	1068	fi
	1069
[693]	1070	if [[ $remote_host = ibmkisti \|\| $remote_host = ibms \|\| $remote_host = ibmy ]]
[475]	1071	then
[1]	1072
[493]	1073	ssh ${remote_username}@${remote_addres} "$module_calls cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1074
[475]	1075	elif [[ $remote_host = ibmh ]]
	1076	then
[1]	1077
[493]	1078	print "$module_calls export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1079
[475]	1080	elif [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
	1081	then
[1]	1082
[622]	1083	# print ". /usr/share/modules/init/bash; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1084	print "eval \`/sw/swdist/bin/modulesinit\`; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1085
[475]	1086	elif [[ $remote_host = lctit ]]
	1087	then
[1]	1088
[475]	1089	echo " " > ${remote_host}_last_make_protokoll
	1090	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
	1091	do
	1092	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1093	done
[1]	1094
[475]	1095	elif [[ $remote_host = lcxt4 ]]
[1]	1096	then
	1097
[691]	1098	ssh ${remote_username}@${remote_addres} ". /opt/modules/default/init/ksh; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1099
[475]	1100	else
[1]	1101
[493]	1102	print "cd $module_calls ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1103
[475]	1104	fi
[1]	1105
[475]	1106	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
	1107	then
	1108	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
	1109	if [[ $silent = false ]]
[40]	1110	then
[475]	1111	answer=dummy
	1112	printf "\n"
	1113	while [[ "$answer" != c && "$answer" != k ]]
[40]	1114	do
[475]	1115	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
	1116	read answer
	1117	if [[ "$answer" = l ]]
	1118	then
	1119	more ${remote_host}_last_make_protokoll
	1120	fi
[40]	1121	done
[475]	1122	if [[ $answer = k ]]
[40]	1123	then
[475]	1124	locat=user_abort; exit
[1]	1125	fi
	1126	fi
[475]	1127	fi
[1]	1128
	1129
	1130
[475]	1131	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
	1132	printf "\n *** tar update on remote host ..."
	1133	if [[ $remote_host != lctit ]]
	1134	then
	1135	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod"
	1136	else
	1137	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	1138	# MIT SSH, DESHALB AUFRUF PER PIPE
	1139	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
	1140	fi
[1]	1141
	1142
[475]	1143	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
	1144	# printf "\n *** \"make clean\" on remote host ..."
	1145	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
	1146	# printf "\n"
[1]	1147
	1148
[25]	1149
	1150
[475]	1151	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
	1152	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	1153	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
	1154	elif [[ $compile_utility_programs = true ]]
	1155	then
	1156
	1157	printf "\n\n"
	1158	echo " *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
	1159	cd ${local_source_path}/../SCRIPTS
	1160
	1161	if [[ $remote_host != lctit ]]
[22]	1162	then
[475]	1163	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
	1164	else
[503]	1165	# TIT ERLAUBT NUR DIE AUSFUEHRUNG GANZ BESTIMMTER KOMMANDOS
[475]	1166	# MIT SSH, DESHALB AUFRUF PER PIPE
	1167	print "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_addres} 2>&1
	1168	fi
[22]	1169
[475]	1170	# KOPIEREN DER SCRIPTE
	1171	if [[ $local_host = decalpha ]]
	1172	then
[503]	1173	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTAENDIGEN PFADES
[475]	1174	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1175	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1176	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
	1177	/bin/scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
	1178	else
	1179	scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
	1180	fi
[22]	1181
[475]	1182	cd - > /dev/null
	1183	cd ${local_source_path}/../UTIL
[22]	1184
[27]	1185
[475]	1186	# KOPIEREN DER UTILITY-PROGRAMME
	1187	if [[ $local_host = decalpha ]]
	1188	then
	1189	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
	1190	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1191	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1192	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
	1193	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
	1194	else
	1195	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
	1196	fi
[27]	1197
	1198
[22]	1199
[475]	1200	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1201	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
	1202	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
	1203	# Z.B. DIE PFADE ZUM COMPILER)
	1204	echo " *** execute \"make\" on remote host"
[22]	1205
[475]	1206	if [[ $remote_host = nech ]]
	1207	then
[503]	1208	make_call_string="sxmake $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
[475]	1209	else
[503]	1210	make_call_string="make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
[475]	1211	fi
[22]	1212
[493]	1213	# generate command to load modules, if modules are given
	1214	if [[ "$modules" != "" ]]
	1215	then
[678]	1216	if [[ $remote_host = lctit ]]
	1217	then
	1218	module_calls=". $modules"
	1219	else
	1220	module_calls="module load ${modules};"
	1221	fi
[562]	1222
	1223	# bugfix for wrong netcdf module
	1224	if [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
	1225	then
	1226	if [[ $(echo $module_calls \| grep -c netcdf/3.6.3-intel) != 0 ]]
	1227	then
	1228	module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
	1229	fi
	1230	fi
[503]	1231	else
	1232	module_calls=""
[493]	1233	fi
	1234
[475]	1235	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
	1236	then
[22]	1237
[493]	1238	ssh ${remote_username}@${remote_addres} "$module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
[22]	1239
[475]	1240	elif [[ $remote_host = ibmh ]]
	1241	then
[22]	1242
[493]	1243	print "$module_calls export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres}
[22]	1244
[475]	1245	elif [[ $remote_host = lctit ]]
	1246	then
[22]	1247
[475]	1248	echo " " > ${remote_host}_last_make_protokoll
	1249	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
	1250	do
[493]	1251	print "$module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[475]	1252	done
[22]	1253
[475]	1254	elif [[ $remote_host = lcxt4 ]]
	1255	then
[22]	1256
[691]	1257	ssh ${remote_username}@${remote_addres} ". /opt/modules/default/init/ksh; $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
[22]	1258
[475]	1259	else
[407]	1260
[493]	1261	print "$module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[407]	1262
[475]	1263	fi
[22]	1264
[475]	1265	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
[22]	1266
[475]	1267	rm -rf ${remote_host}_last_make_protokoll
[22]	1268
[475]	1269	# make on local host
	1270	else
[22]	1271
[544]	1272	# workaround for lcxt4
	1273	if [[ $remote_host = lcxt4 ]]
	1274	then
	1275	. /opt/modules/default/init/ksh
	1276	fi
	1277
	1278	# first load modules, if given
	1279	if [[ "$modules" != "" ]]
	1280	then
[678]	1281	if [[ $remote_host = lctit ]]
	1282	then
	1283	. $modules
	1284	else
	1285	module load ${modules}
	1286	fi
[544]	1287	fi
	1288
	1289
[475]	1290	if [[ $compile_utility_programs = false ]]
	1291	then
[22]	1292
[475]	1293	# DEPOSITORY VERZEICHNIS ERZEUGEN, FALLS NOCH NICHT VORHANDEN
	1294	eval remote_md=$remote_md
	1295	if [[ ! -d $remote_md ]]
[40]	1296	then
[475]	1297	if mkdir $remote_md
[215]	1298	then
[475]	1299	printf "\n\n *** directory for make depository:"
	1300	printf "\n $remote_md"
	1301	printf "\n was created\n"
	1302	else
	1303	printf "\n +++ directory for make depository:"
	1304	printf "\n $remote_md"
	1305	printf "\n cannot be created"
	1306	locat=local_depository_path; exit
[215]	1307	fi
[475]	1308	fi
[215]	1309
[475]	1310	# QUELLTEXT-DATEIEN AUS REPOSITORY INS DEPOSITORY KOPIEREN
	1311	echo " "
	1312	echo " *** updating sources in $remote_md"
	1313	cd $remote_md
	1314	cp $local_source_path/${mainprog}_sources.tar .
	1315	tar xf ${mainprog}_sources.tar
[215]	1316
[475]	1317	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
	1318	echo " "
	1319	echo " *** execute \"make\" on local host"
[1]	1320
[475]	1321	make $make_options PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
[40]	1322
[475]	1323	if [[ $? != 0 ]]
	1324	then
	1325	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
	1326	if [[ $silent = false ]]
[1]	1327	then
[475]	1328	answer=dummy
	1329	printf "\n"
	1330	while [[ "$answer" != c && "$answer" != k ]]
	1331	do
	1332	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
	1333	read answer
	1334	if [[ "$answer" = l ]]
[1]	1335	then
[475]	1336	more ${remote_host}_last_make_protokoll
[1]	1337	fi
[475]	1338	done
	1339	if [[ $answer = k ]]
	1340	then
	1341	locat=user_abort; exit
[1]	1342	fi
	1343	fi
[475]	1344	fi
[1]	1345
	1346
[503]	1347	# TAR NEW VERSION ON LOCAL HOST
[475]	1348	printf "\n *** tar update on local host ..."
	1349	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
[1]	1350
[22]	1351
[475]	1352	# COMPILE THE UTILITY PROGRAMS
	1353	elif [[ $compile_utility_programs = true ]]
	1354	then
	1355	printf "\n\n"
	1356	echo " *** compiling the utility programs ..."
	1357	cd ${local_source_path}/../UTIL
[503]	1358
	1359	# TOUCH FILES IN ORDER TO FORCE COMPILATION FOR EVERY BLOCK
	1360	touch *.f90
	1361	make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
[475]	1362	cd - > /dev/null
[1]	1363	fi
	1364
	1365	fi
[475]	1366
[1]	1367	done
	1368
	1369
	1370	if [[ $host_found = false ]]
	1371	then
	1372	if [[ $host = all ]]
	1373	then
	1374	printf "\n +++ no hosts found in configuration file"
	1375	else
	1376	printf "\n +++ host \"$host\" not found in configuration file"
	1377	fi
	1378	locat=config_file; exit
	1379	fi
	1380
	1381
	1382
[503]	1383	# FINAL WORK
[1]	1384	rm -f hosts_found_in_config_file
	1385

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |