Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 724

Last change on this file since 724 was 717, checked in by gryschka, 13 years ago
added lckordi
Property svn:keywords set to `Id Rev`
File size: 48.4 KB

Rev	Line
[1]	1	#!/bin/ksh
[503]	2	# mbuild - script for compiling the PALM code and its utility programs
[169]	3	# $Id: mbuild 717 2011-04-03 16:04:01Z raasch $
[1]	4
[503]	5	# Procedure to compile code on local and remote hosts using the
	6	# make-mechanism. The source code must be provided on the local host.
[1]	7
[503]	8	# Last changes:
	9	# 06/05/02 - Siggi - start development
	10	# 12/06/02 - Siggi - first version finished
	11	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) included
	12	# 19/12/02 - Siggi - ibmb included
[1]	13	# 05/02/03 - Siggi - hostname nobela included
	14	# 04/03/03 - Siggi - host nech included
	15	# 06/03/03 - Siggi - make_call_string is echoed without '' to
	16	# file LAST_MAKE_CALL (otherwise error on NEC, because
	17	# '' are part of compiler options
	18	# 16/03/03 - Siggi - Two underscores are placed in front of every define
	19	# string, in case that palm.f90 version contains
	20	# such strings
	21	# 16/04/03 - Siggi - First extensions for linux machines
	22	# 24/06/03 - Siggi - host orkan included
	23	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
	24	# 24/07/03 - Siggi - host maestro admitted
	25	# 06/08/03 - Siggi - host gregale admitted
	26	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
	27	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
	28	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
	29	# (-D$OMP=OMP) in order to avoid problems with
	30	# OMP_NUM_THREADS
	31	# 09/01/04 - Siggi - action above cancelled
	32	# 28/01/04 - Siggi - action above re-cancelled
	33	# 08/03/04 - Siggi - host scirocco admitted
	34	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
	35	# the respective .f90 file is not listed in the makefile
	36	# and deletion is demanded by the user
	37	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
	38	# due to error in ssh installation (otherwise a prompt
	39	# for the password appears)
	40	# 23/07/04 - Siggi - changes due to the new berni configuration
	41	# (federation switch)
	42	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
	43	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
	44	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
	45	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
	46	# 24/04/05 - Siggi - netcdf support on lcmuk
	47	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
	48	# 12/05/05 - Siggi - netcdf support on ibm
	49	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
	50	# 18/05/05 - Siggi - netcdf support on nec
	51	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
	52	# 23/05/05 - Siggi - netcdf support on ibms
	53	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
	54	# 30/06/05 - Siggi - netcdf support on bora
	55	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
	56	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
	57	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
	58	# host gfdl5 (ibmy) admitted
	59	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
	60	# 20/01/06 - Siggi - cpp directive for ibmy
	61	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
	62	# 10/02/06 - Siggi - modifications for scp on decalpha
	63	# 13/04/06 - Siggi - ostria admitted
	64	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
	65	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
	66	# 29/05/05 - Siggi - atmos (lcide) admitted
	67	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
	68	# 24/11/06 - Siggi - breva and levanto admitted
	69	# 07/02/07 - Siggi - adapted for RIAM (neck)
[5]	70	# 10/02/07 - Siggi - all hpmuk-related code removed
[40]	71	# 02/03/07 - Siggi - compilation of utility programs and transfer of
[27]	72	# scripts to remote hosts added (option -u)
[66]	73	# 14/03/07 - Siggi - fimm admitted, revision number added to terminal
	74	# output
[69]	75	# 16/03/07 - Siggi - adjustments (netcdf) for lctit
	76	# adjustments for running under pdksh, local ip-addres
	77	# is not determined any more
[82]	78	# 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
	79	# from configuration file
	80	# host identifier (local_host) is read from config file
[116]	81	# 10/10/07 - Siggi - bugfix: handling of comment lines
[181]	82	# 18/07/08 - Siggi - adapted for lcsgih
	83	# 21/07/08 - Siggi - mainprog (executable) is added to the tar-file
	84	# ({mainprog}_current_version)
[206]	85	# 02/10/08 - Siggi - adapted for lcxt4
[215]	86	# 14/11/08 - Siggi - update mechanism completely revised: source tarfile
	87	# remains in source directory, one depository per block
[266]	88	# (given in the config-file) is created, allways all
	89	# files from the source directory are copied to the
	90	# respective depository, no additional file checks are
	91	# done any more (version 2.1)
[224]	92	# 13/01/09 - Marcus- re-enable compilation more than once on lcmuk (as on
	93	# other machines)
[266]	94	# 21/03/09 - Siggi - -u copies also copies process_dvr_output and
	95	# .dvrserver.config
[305]	96	# 21/04/09 - Siggi - adjustments for new IBM at DKRZ, which is now ibmh
[367]	97	# 25/08/09 - BjornM- adapted for lck
[407]	98	# 01/12/09 - BjornM- re-adjustments for lcxt4
[437]	99	# 01/02/10 - Siggi - adjustments for lcxt5m
[475]	100	# 03/02/10 - Siggi - make options (mopts) to be set by configuration file
	101	# implemented, remoted mode option -r completely
	102	# removed, t3e related parts removed
[492]	103	# 26/02/10 - BjornM- re-adjustments for lcxt4 (new modules)
[493]	104	# 01/03/10 - Siggi - mpilib replaced by modules: explicit module settings
	105	# removed; modules should now be given in the
	106	# configuration file
[503]	107	# 02/03/10 - Siggi - utility programs are created separately for each
	108	# block in the configuration file,
	109	# parallel make for utility programs
[508]	110	# 12/03/10 - Siggi - bugfix: remode_md was given a wrong value
[544]	111	# 16/08/10 - BjornM- bugfix: call of modules on local host, new workaround
	112	# for lcxt4
[555]	113	# 07/09/10 - Siggi - bugfix for wrong netcdf/3.6.3 module on lcsgi
[622]	114	# 08/12/10 - Siggi - initialization of the module command changed for
	115	# SGI-ICE/lcsgi
	116	# adjustments for Kyushu Univ. (lcrte, ibmku)
[635]	117	# 14/12/10 - Siggi - adjustments for new Tsubame system at Tokyo
	118	# institute of technology (lctit)
[693]	119	# 04/03/11 - BjornM- re-adjustments for lcxt4
	120	# 06/03/11 - Siggi - adjustments for ibmkisti
[717]	121	# 03/04/11 - Micha - added lckordi
[1]	122
	123
[508]	124
[503]	125	# VARIABLE DECLARATIONS + DEFAULT VALUES
[22]	126	compile_utility_programs=false
[1]	127	config_file=.mrun.config
[67]	128	fimm=false
[1]	129	host=all
	130	host_found=false
	131	locat=normal
	132	makefile=""
[493]	133	module_calls=""
[1]	134	scirocco=false
	135	silent=false
	136	suf=f90
	137	update=false
[83]	138	working_directory=`pwd`
[1]	139
	140	typeset -i ih ihost=0
	141
[66]	142	typeset -R30 calltime
[1]	143	typeset -L20 column1
	144	typeset -L50 column2
	145	typeset -L70 column3
[215]	146	typeset -L40 version="MBUILD 2.1 Rev$Rev: 717 $"
[1]	147
[503]	148	# ERROR HANDLING
	149	# IN CASE OF EXIT:
[83]	150	trap 'rm -rf $working_directory/tmp_mbuild
[69]	151	if [[ $locat != normal ]]
[1]	152	then
	153	printf "\n\n +++ mbuild killed \n\n"
	154	else
	155	printf "\n\n *** mbuild finished \n\n"
	156	fi' exit
	157
	158
[503]	159	# IN CASE OF TERMINAL-BREAK:
[83]	160	trap 'rm -rf $working_directory/tmp_mbuild
[69]	161	printf "\n\n +++ mbuild killed by \"^C\" \n\n"
[1]	162	exit
	163	' 2
	164
	165
[215]	166	tmp_mbuild=${working_directory}/tmp_mbuild
[1]	167
[503]	168	# READ SHELLSCRIPT-OPTIONS
[475]	169	while getopts :c:h:m:s:u option
[1]	170	do
	171	case $option in
	172	(c) config_file=$OPTARG;;
	173	(h) host=$OPTARG;;
	174	(m) makefile=$OPTARG;;
	175	(s) suf=$OPTARG;;
[22]	176	(u) compile_utility_programs=true;;
[1]	177	(\?) printf "\n +++ unknown option $OPTARG \n";
	178	locat=parameter; exit;;
	179	esac
	180	done
	181
	182
	183
[503]	184	# CHECK, IF CONFIGURATION-FILE EXISTS
[82]	185	if [[ ! -f $config_file ]]
	186	then
	187	printf "\n +++ configuration file: "
	188	printf "\n $config_file"
	189	printf "\n does not exist"
	190	locat=configuration; exit
	191	fi
	192
	193
	194
[503]	195	# DETERMINE THE LOCAL HOST
[1]	196	local_host_real_name=$(hostname)
[69]	197	# local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
	198
[1]	199
[82]	200
[503]	201	# DETERMINE HOST-IDENTIFIER (local_host) FROM THE CONFIG-FILE
[82]	202	line=""
[215]	203	grep "%host_identifier" $config_file > $tmp_mbuild
[82]	204	while read line
	205	do
[116]	206	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
[82]	207	then
	208	HOSTNAME=`echo $line \| cut -d" " -s -f2`
	209	host_identifier=`echo $line \| cut -d" " -s -f3`
[83]	210	if [[ $local_host_real_name = $HOSTNAME ]]
[82]	211	then
	212	local_host=$host_identifier
	213	break
	214	fi
	215	fi
[215]	216	done < $tmp_mbuild
[82]	217
	218	if [[ "$local_host" = "" ]]
	219	then
	220	printf "\n +++ no host identifier found in configuration file \"$config_file\""
	221	printf "\n for local host \"$local_host_real_name\"."
	222	printf "\n Please add line"
	223	printf "\n \"\%host_identifier $local_host_real_name <identifier>\""
	224	printf "\n to the configuration file."
	225	locat=local_host; exit
	226	fi
	227
	228
	229
[1]	230	[[ $local_host_real_name = scirocco ]] && scirocco=true
[67]	231	[[ $local_host_real_name = fimm.bccs.uib.no ]] && fimm=true
[1]	232
	233
	234
	235	if [[ $local_host != ibms ]]
	236	then
	237	config_file=$PWD/$config_file
	238	else
	239	config_file=`pwd`/$config_file
	240	fi
	241
	242
	243
[503]	244	# DETERMINE USER NAME ON LOCAL HOST FROM THE CONFIG-FILE
[1]	245	line=""
[215]	246	grep " $local_host" $config_file \| grep "%remote_username" > $tmp_mbuild
[69]	247	while read line
[1]	248	do
[116]	249	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
[1]	250	then
	251	local_username=`echo $line \| cut -d" " -s -f2`
	252	fi
[215]	253	done < $tmp_mbuild
[1]	254
[82]	255
[1]	256	if [[ "$local_username" = "" ]]
	257	then
	258	printf "\n +++ no user name found in configuration file"
	259	printf "\n for local host \"$local_host\" "
	260	locat=config_file; exit
	261	fi
	262
	263
[503]	264	# DETERMINE LOCAL SOURCE-CODE PATH.
	265	# FIRST CHECK, IF A GLOBAL SOURCE-CODE PATH HAS BEEN DECLARED FOR ALL HOSTS.
	266	# THEREFORE, FIRST SET ALL GLOBAL VARIABLES DECLARED IN THE CONFIG-FILE,
	267	# BECAUSE THEY MAY BE USED AS PART OF THE PATH NAME.
[5]	268	line=""
[215]	269	grep "%" $config_file > $tmp_mbuild
[69]	270	while read line
[5]	271	do
[116]	272	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" && $(echo $line \| cut -c1) != "#" ]]
[1]	273	then
[5]	274	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
	275	value=`echo $line \| cut -d" " -s -f2`
[8]	276	eval export $var=\$value
[1]	277	fi
[215]	278	done < $tmp_mbuild
[1]	279
[503]	280	# NOW CHECK, IF A GLOBAL SOURCE-CODE-PATH HAS BEEN DECLARED
[1]	281	line=""
[215]	282	grep "%source_path" $config_file > $tmp_mbuild
[69]	283	while read line
[1]	284	do
	285	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	286	then
	287	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
	288	then
	289	global_source_path=`echo $line \| cut -d" " -s -f2`
	290	fi
	291	fi
[215]	292	done < $tmp_mbuild
[1]	293
	294	line=""
[215]	295	grep " $local_host" $config_file \| grep "%source_path" > $tmp_mbuild
[69]	296	while read line
[1]	297	do
	298	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	299	then
	300	local_source_path=`echo $line \| cut -d" " -s -f2`
	301	fi
[215]	302	done < $tmp_mbuild
[1]	303
	304	if [[ "$local_source_path" = "" ]]
	305	then
	306	if [[ "$global_source_path" != "" ]]
	307	then
	308	local_source_path=$global_source_path
	309	else
	310	printf "\n +++ no source path found in configuration file"
	311	printf "\n for local host \"$local_host\" "
	312	printf "\n please set \"\%source_path\" in configuration file"
	313	locat=config_file; exit
	314	fi
	315	fi
	316	eval local_source_path=$local_source_path
[8]	317	eval local_source_path=$local_source_path
[1]	318
	319
[215]	320
[503]	321	# DETERMINE GLOBAL DEPOSITORY-PATH
[1]	322	line=""
[215]	323	grep "%depository_path" $config_file > $tmp_mbuild
[69]	324	while read line
[1]	325	do
	326	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	327	then
	328	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
	329	then
	330	global_depository_path=`echo $line \| cut -d" " -s -f2`
	331	fi
	332	fi
[215]	333	done < $tmp_mbuild
[1]	334
	335
	336
[503]	337	# CHECK, IF A MAIN PROGRAM HAS BEEN DEFINED IN THE CONFIG-FILE
[5]	338	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
	339	then
	340	printf "\n +++ no main program or more than one main program defined"
	341	printf "\n in configuration file"
	342	locat=configuration; exit
	343	else
	344	line=`grep "%mainprog" $config_file`
	345	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
	346	then
	347	printf "\n +++ no main program defined in configuration file"
	348	locat=configuration; exit
	349	fi
	350	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
	351	fi
	352
	353
	354
[503]	355	# CHECK IF MAKEFILE EXITS
[1]	356	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
	357	if [[ ! -f $makefile ]]
	358	then
	359	printf "\n +++ makefile: "
	360	printf "\n $makefile"
	361	printf "\n does not exist"
	362	locat=makefile; exit
	363	fi
	364
	365
[503]	366	# HEADER-OUTPUT (PART1: MESSAGES CONCERNING THE LOCAL HOST)
[1]	367	calltime=$(date)
	368	printf "\n"
	369	printf "#------------------------------------------------------------------------# \n"
	370	printf "\| $version$calltime \| \n"
	371	printf "\| \| \n"
	372	column1="called on:"; column2=$local_host_real_name
	373	printf "\| $column1$column2 \| \n"
	374	column1="local username:"; column2=$local_username
	375	printf "\| $column1$column2 \| \n"
	376	column1="local IP-addres:"; column2=$local_addres
	377	printf "\| $column1$column2 \| \n"
	378	column1="config file:"; column2=$config_file
	379	printf "\| $column1$column2 \| \n"
	380	column1="makefile:"; column2=$makefile
	381	printf "\| $column1$column2 \| \n"
	382	column1="local source path:"; column2=$local_source_path
	383	printf "\| $column1$column2 \| \n"
	384	printf "#------------------------------------------------------------------------# \n"
	385
	386	# printf "\| \| \n"
	387
	388
[40]	389	if [[ $compile_utility_programs = false ]]
	390	then
[1]	391
[503]	392	# IN ANY CASE, GIVE ALL FILES WRITE-PERMIT, IN ORDER TO AVOID PROBLEMS
	393	# WITH OVERWRITING FILES ON THE REMOTE HOST
[215]	394	cd $local_source_path
	395	printf "\n\n *** tar of makefile and source files in $local_source_path"
[40]	396	tar -cf ${mainprog}_sources.tar Makefile *.$suf
	397	printf "\n"
[1]	398
[40]	399	fi
[1]	400
	401
[40]	402
[503]	403	# GET CONFIRMATION TO CONTINUE
[1]	404	if [[ $host = all ]]
	405	then
	406	printf "\n *** updates will be made for ALL hosts found in"
	407	printf "\n the configuration file"
	408	else
	409	printf "\n *** update will be made for host \"$host\" "
	410	fi
	411
	412	if [[ $silent = false ]]
	413	then
	414	answer=dummy
	415	printf "\n\n"
	416	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
	417	do
	418	printf " >>> continue (y/n) ? "
	419	read answer
	420	done
	421	if [[ $answer = n \|\| $answer = N ]]
	422	then
	423	locat=user_abort; exit
	424	fi
	425	fi
	426
	427
	428
	429
	430	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
	431	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
	432	printf "\n *** scanning configuration file for host(s) ..."
	433
[215]	434	grep %fopts $config_file > $tmp_mbuild
[69]	435	while read line
[1]	436	do
	437	# KOMMENTARZEILEN UEBERSPRINGEN
	438	[[ $(echo $line \| cut -c1) = "#" ]] && continue
	439	(( ihost = ihost + 1 ))
	440	hostline[$ihost]="$line"
[215]	441	done < $tmp_mbuild
[1]	442
	443
	444	while (( ih < ihost ))
	445	do
	446
	447	(( ih = ih + 1 ))
	448
	449	# REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
	450	# NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
	451	# SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
	452	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
	453	remote_host=`echo $remote_host_string \| cut -d" " -f1`
	454	if [[ $host != all ]]
	455	then
	456	[[ $remote_host != $host ]] && continue
	457	fi
	458	host_found=true
	459	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
	460	if [[ $condition1 = $remote_host ]]
	461	then
	462	condition1=""
	463	else
	464	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
	465	fi
	466
[493]	467	modules=""
[82]	468	netcdf_inc=""
	469	netcdf_lib=""
[1]	470
	471	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
	472	case $remote_host in
[717]	473	(lckordi) remote_adress=210.219.61.8;;
[116]	474	(lcmuk) remote_addres=130.75.105.2;;
[622]	475	(lcrte) remote_addres=133.5.185.60;;
[181]	476	(lcsgib) remote_addres=130.73.232.102;;
[346]	477	(lcsgih) remote_addres=130.75.4.102;;
[367]	478	(lck) remote_addres=165.132.26.61;;
[635]	479	(lctit) remote_addres=10.1.6.170;;
[206]	480	(lcxt4) remote_addres=129.177.20.113;;
[437]	481	(lcxt5m) remote_addres=193.166.211.144;;
[83]	482	(decalpha) remote_addres=165.132.26.56;;
[305]	483	(ibmh) remote_addres=136.172.40.15;;
[693]	484	(ibmkisti) remote_addres=150.183.146.24;;
[622]	485	(ibmku) remote_addres=133.5.4.129;;
[83]	486	(ibms) remote_addres=150.183.5.101;;
	487	(ibmy) remote_addres=165.132.26.58;;
	488	(nech) remote_addres=136.172.44.192;;
	489	(neck) remote_addres=133.5.178.11;;
	490	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
	491	(*) if [[ $local_host != $remote_host ]]
[1]	492	then
[83]	493	printf "\n +++ remote host \"$remote_host\" unknown";
[503]	494	printf "\n please inform PALM group support!"
[1]	495	fi;;
	496	esac
	497
	498
	499	# REMOTE-USERNAMEN ERMITTELN
	500	line=""
[116]	501	found=false
[215]	502	grep "$remote_host_string" $config_file \| grep "%remote_username" > $tmp_mbuild
[69]	503	while read line1
[1]	504	do
[116]	505
[1]	506	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	507	then
	508	line="$line1"
	509	fi
[116]	510
	511	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	512	then
	513	remote_username=`echo $line \| cut -d" " -s -f2`
	514	found=true
	515	fi
	516
[215]	517	done < $tmp_mbuild
[1]	518
[116]	519	if [[ $found = false ]]
[1]	520	then
	521	printf "\n +++ no remote username found in configuration file"
	522	printf "\n for \"$remote_host_string\" "
	523	locat=config_file; exit
	524	fi
	525
	526
	527	# REMOTE-QUELLTEXTPFAD ERMITTELN
	528	line=""
[54]	529	remote_source_path=""
[215]	530	grep "$remote_host_string" $config_file \| grep "%source_path" > $tmp_mbuild
[69]	531	while read line1
[1]	532	do
[116]	533
[1]	534	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	535	then
	536	line="$line1"
	537	fi
[116]	538
	539	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	540	then
	541	remote_source_path=`echo $line \| cut -d" " -s -f2`
	542	fi
	543
[215]	544	done < $tmp_mbuild
[1]	545
	546	if [[ "$remote_source_path" = "" ]]
	547	then
	548	if [[ "$global_source_path" != "" ]]
	549	then
	550	remote_source_path=$global_source_path
	551	else
	552	printf "\n +++ no source path found in configuration file"
	553	printf "\n for \"$remote_host_string\" "
	554	locat=config_file; exit
	555	fi
	556	fi
	557
[22]	558	remote_ud=${remote_source_path}/../UTIL
[24]	559	remote_ud=$(eval echo $remote_ud)
[1]	560
[54]	561
[1]	562	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
[54]	563	remote_md=""
[1]	564	line=""
[215]	565	grep "$remote_host_string" $config_file \| grep "%depository_path" > $tmp_mbuild
[69]	566	while read line1
[1]	567	do
[116]	568
[1]	569	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	570	then
	571	line="$line1"
	572	fi
[116]	573
	574	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	575	then
	576	remote_md=`echo $line \| cut -d" " -s -f2`
	577	fi
	578
[215]	579	done < $tmp_mbuild
[1]	580
	581	if [[ "$remote_md" = "" ]]
	582	then
	583	if [[ "$global_depository_path" != "" ]]
	584	then
	585	remote_md=$global_depository_path
	586	else
	587	printf "\n +++ no depository path found in configuration file"
	588	printf "\n for \"$remote_host_string\" "
	589	printf "\n please set \"\%depository_path\" in configuration file"
	590	locat=config_file; exit
	591	fi
	592	fi
	593
[8]	594	remote_md=$(eval echo $remote_md)
[503]	595	block=""
	596	[[ "$condition1" != "" ]] && block=_$condition1
	597	[[ "$condition2" != "" ]] && block=${block}_$condition2
[508]	598	remote_md=${remote_md}$block
[1]	599
[8]	600
[1]	601	# COMPILERNAMEN ERMITTELN
	602	line=""
[116]	603	found=false
[215]	604	grep "$remote_host_string" $config_file \| grep "%compiler_name " > $tmp_mbuild
[69]	605	while read line1
[1]	606	do
[116]	607
[1]	608	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	609	then
	610	line="$line1"
	611	fi
[116]	612
	613	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	614	then
	615	compiler_name=`echo $line \| cut -d" " -s -f2`
	616	found=true
	617	fi
	618
[215]	619	done < $tmp_mbuild
[1]	620
[116]	621	if [[ $found = false ]]
[1]	622	then
	623	printf "\n +++ no compiler name found in configuration file"
	624	printf "\n for \"$remote_host_string\" "
	625	locat=config_file; exit
	626	fi
	627
	628
[27]	629	# BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
	630	# SERIELLER COMPILERNAME ERMITTELT WERDEN
	631	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
	632	then
	633	line=""
[116]	634	found=false
[215]	635	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" > $tmp_mbuild
[69]	636	while read line1
[27]	637	do
[116]	638
[27]	639	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	640	then
	641	line="$line1"
	642	fi
[116]	643
	644	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	645	then
	646	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
	647	found=true
	648	fi
	649
[215]	650	done < $tmp_mbuild
[1]	651
[116]	652	if [[ $found = false ]]
[27]	653	then
[28]	654	printf "\n +++ no serial compiler name found in configuration file"
[27]	655	printf "\n for \"$remote_host_string\" "
	656	locat=config_file; exit
	657	fi
	658	else
	659	compiler_name_ser=$compiler_name
	660	fi
	661
	662
	663
[82]	664	# PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
	665	line=""
[116]	666	found=false
[215]	667	grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
[82]	668	while read line1
	669	do
[116]	670
[82]	671	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	672	then
	673	line="$line1"
	674	fi
[116]	675
	676	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	677	then
	678	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	679	cpp_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	680	found=true
	681	fi
	682
[215]	683	done < $tmp_mbuild
[116]	684
	685	if [[ $found = false ]]
[82]	686	then
	687	printf "\n +++ no preprocessor options found in configuration file"
	688	printf "\n for \"$remote_host_string\" "
	689	locat=config_file; exit
	690	fi
	691
[116]	692
[82]	693	# RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
	694	for string in $remote_host_string
	695	do
	696	if [[ $(echo $remote_host \| cut -c1-2) = lc && $(echo $string \| cut -c1-2) = lc ]]
	697	then
	698	cpp_options="$cpp_options -D__lc "
[83]	699	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $(echo $string \| cut -c1-3) = ibm ]]
	700	then
	701	cpp_options="${cpp_options},-D__ibm"
	702	elif [[ $(echo $remote_host \| cut -c1-3) = nec && $(echo $string \| cut -c1-3) = nec ]]
	703	then
	704	cpp_options="${cpp_options} -D__nec"
[82]	705	else
[83]	706	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
	707	then
	708	cpp_options="${cpp_options},-D__$string"
	709	else
	710	cpp_options="$cpp_options -D__$string "
	711	fi
[82]	712	fi
	713	done
	714
	715
	716
	717	# NETCDF-OPTIONEN ERMITTELN
	718	line=""
[215]	719	grep "$remote_host_string" $config_file \| grep "%netcdf_inc" > $tmp_mbuild
[82]	720	while read line1
	721	do
[116]	722
[82]	723	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	724	then
	725	line="$line1"
	726	fi
[116]	727
	728	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	729	then
	730	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	731	netcdf_inc=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	732	fi
	733
[215]	734	done < $tmp_mbuild
[82]	735
	736	line=""
[215]	737	grep "$remote_host_string" $config_file \| grep "%netcdf_lib" > $tmp_mbuild
[82]	738	while read line1
	739	do
[116]	740
[82]	741	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	742	then
	743	line="$line1"
	744	fi
[116]	745
	746	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	747	then
	748	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	749	netcdf_lib=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	750	fi
	751
[215]	752	done < $tmp_mbuild
[82]	753
	754
	755
[475]	756	# get make options
	757	line=""
	758	found=false
	759	grep "$remote_host_string" $config_file \| grep "%mopts" > $tmp_mbuild
	760	while read line1
	761	do
	762
	763	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	764	then
	765	line="$line1"
	766	fi
	767
	768	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	769	then
	770	# remove colons from directive string
	771	make_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	772
	773	fi
	774
	775	done < $tmp_mbuild
	776
	777
	778
[1]	779	# COMPILEROPTIONEN ERMITTELN
	780	line=""
[116]	781	found=false
[215]	782	grep "$remote_host_string" $config_file \| grep "%fopts" > $tmp_mbuild
[69]	783	while read line1
[1]	784	do
[116]	785
[1]	786	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	787	then
	788	line="$line1"
	789	fi
[116]	790
	791	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	792	then
	793	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	794	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	795	found=true
	796
	797	# NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
	798	compiler_options="$compiler_options $netcdf_inc"
	799	fi
	800
[215]	801	done < $tmp_mbuild
[116]	802
	803	if [[ $found = false ]]
[1]	804	then
	805	printf "\n +++ no compiler options found in configuration file"
	806	printf "\n for \"$remote_host_string\" "
	807	locat=config_file; exit
	808	fi
[82]	809
[1]	810
	811
[503]	812	# get modules to be loaded
[221]	813	line=""
[493]	814	grep "$remote_host_string" $config_file \| grep "%modules" > $tmp_mbuild
[221]	815	while read line1
	816	do
	817
	818	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	819	then
	820	line="$line1"
	821	fi
	822
	823	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	824	then
	825	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
[493]	826	modules=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
[221]	827	fi
	828
	829	done < $tmp_mbuild
	830
	831
	832
	833
[1]	834	# LADER-OPTIONEN ERMITTELN
	835	line=""
[116]	836	found=false
[215]	837	grep "$remote_host_string" $config_file \| grep "%lopts" > $tmp_mbuild
[69]	838	while read line1
[1]	839	do
[116]	840
[1]	841	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	842	then
	843	line="$line1"
	844	fi
[116]	845
	846	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	847	then
	848	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	849	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	850	found=true
	851
	852	# NETCDF-LIBRARY HINZUFUEGEN
	853	loader_options="$loader_options $netcdf_lib"
	854	fi
	855
[215]	856	done < $tmp_mbuild
[1]	857
[116]	858	if [[ $found = false ]]
[1]	859	then
	860	printf "\n +++ no loader options found in configuration file"
	861	printf "\n for \"$remote_host_string\" "
	862	locat=config_file; exit
	863	fi
[82]	864
[1]	865
	866	printf "\n\n#------------------------------------------------------------------------# \n"
	867	if [[ $remote_host = $local_host ]]
	868	then
	869	column1="remote_host:"; column2="$remote_host (= local host!)"
	870	else
	871	column1="remote_host:"; column2=$remote_host
	872	fi
	873	printf "\| $column1$column2 \| \n"
	874	printf "\| \| \n"
	875	column1="conditions:"; column2="$condition1 $condition2"
	876	printf "\| $column1$column2 \| \n"
	877	column1="make depository:"; column2=$remote_md
	878	printf "\| $column1$column2 \| \n"
[215]	879	line=$(echo "$remote_md" \| cut -c51-)
	880	while [[ "$line" != "" ]]
	881	do
	882	column1=""
	883	column2=$line
	884	printf "\| $column1$column2 \| \n"
	885	line=$(echo "$line" \| cut -c51-)
	886	done
[25]	887	if [[ $compile_utility_programs = true ]]
	888	then
	889	column1="utility directory:"; column2=$remote_ud
	890	printf "\| $column1$column2 \| \n"
	891	fi
[1]	892	column1="username:"; column2=$remote_username
	893	printf "\| $column1$column2 \| \n"
	894	column1="addres:"; column2=$remote_addres
	895	printf "\| $column1$column2 \| \n"
	896	column1="compiler:"; column2=$compiler_name
	897	printf "\| $column1$column2 \| \n"
[28]	898	if [[ $compile_utility_programs = true ]]
	899	then
	900	column1="serial compiler:"; column2=$compiler_name_ser
	901	printf "\| $column1$column2 \| \n"
	902	fi
[475]	903	if [[ "$make_options" != "" ]]
	904	then
	905	column1="make options:"; column2=$make_options
	906	printf "\| $column1$column2 \| \n"
	907	fi
[1]	908	column1="cpp options:"; column2=$cpp_options
	909	printf "\| $column1$column2 \| \n"
	910	line=$(echo "$cpp_options" \| cut -c51-)
	911	while [[ "$line" != "" ]]
	912	do
	913	column1=""
	914	column2=$line
	915	printf "\| $column1$column2 \| \n"
	916	line=$(echo "$line" \| cut -c51-)
	917	done
	918	column1="compiler options:"; column2=$compiler_options
	919	printf "\| $column1$column2 \| \n"
	920	line=$(echo "$compiler_options" \| cut -c51-)
	921	while [[ "$line" != "" ]]
	922	do
	923	column1=""
	924	column2=$line
	925	printf "\| $column1$column2 \| \n"
	926	line=$(echo "$line" \| cut -c51-)
	927	done
	928	column1="loader options:"; column2=$loader_options
	929	printf "\| $column1$column2 \| \n"
	930	line=$(echo "$loader_options" \| cut -c51-)
	931	while [[ "$line" != "" ]]
	932	do
	933	column1=""
	934	column2=$line
	935	printf "\| $column1$column2 \| \n"
	936	line=$(echo "$line" \| cut -c51-)
	937	done
[493]	938	if [[ $modules != "" ]]
	939	then
	940	column1="modules to be load:"; column2=$modules
	941	printf "\| $column1$column2 \| \n"
	942	line=$(echo "$modules" \| cut -c51-)
	943	while [[ "$line" != "" ]]
	944	do
	945	column1=""
	946	column2=$line
	947	printf "\| $column1$column2 \| \n"
	948	line=$(echo "$line" \| cut -c51-)
	949	done
	950	fi
[1]	951	printf "#------------------------------------------------------------------------# \n"
	952
	953	if [[ $silent = false ]]
	954	then
	955	answer=dummy
	956	printf "\n\n"
	957	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
	958	do
	959	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
	960	read answer
	961	done
	962	if [[ $answer = a \|\| $answer = A ]]
	963	then
	964	locat=user_abort; exit
	965	fi
	966	if [[ $answer = c \|\| $answer = C ]]
	967	then
[503]	968	silent=true
[1]	969	fi
	970	if [[ $answer = s \|\| $answer = S ]]
	971	then
	972	continue
	973	fi
	974	fi
	975
	976
[475]	977	# make on remote host
	978	if [[ $remote_host != $local_host ]]
[1]	979	then
	980
[475]	981	if [[ $compile_utility_programs = false ]]
[1]	982	then
	983
[475]	984	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	985	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
	986	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
	987	if [[ $remote_host != lctit ]]
	988	then
	989	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
	990	else
	991	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	992	# MIT SSH, DESHALB AUFRUF PER PIPE
	993	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
	994	fi
	995	if [[ $local_host = decalpha ]]
	996	then
	997	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
	998	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	999	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1000	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
	1001	/bin/scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
	1002	else
	1003	scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
	1004	fi
[1]	1005
	1006
	1007
[475]	1008	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
	1009	echo " *** untar previous update on remote host, if existing"
	1010	if [[ $remote_host != lctit ]]
	1011	then
	1012	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
	1013	else
	1014	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	1015	# MIT SSH, DESHALB AUFRUF PER PIPE
	1016	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
	1017	fi
[1]	1018
	1019
[475]	1020	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
	1021	echo " *** untar actual sources on remote host"
	1022	if [[ $remote_host != lctit ]]
	1023	then
	1024	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
	1025	else
	1026	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	1027	# MIT SSH, DESHALB AUFRUF PER PIPE
	1028	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
	1029	fi
[1]	1030
	1031
[475]	1032	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1033	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
	1034	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
	1035	# Z.B. DIE PFADE ZUM COMPILER)
	1036	echo " *** execute \"make\" on remote host"
[1]	1037
[493]	1038
	1039	# generate make call with make options
[475]	1040	if [[ $remote_host = nech ]]
	1041	then
	1042	make_call_string="sxmake $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1043	else
	1044	make_call_string="make $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1045	fi
[1]	1046
[493]	1047	# generate command to load modules, if modules are given
	1048	if [[ "$modules" != "" ]]
	1049	then
[678]	1050	if [[ $remote_host = lctit ]]
	1051	then
	1052	module_calls=". $modules"
	1053	else
	1054	module_calls="module load ${modules};"
	1055	fi
[555]	1056
	1057	# bugfix for wrong netcdf module
	1058	if [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
	1059	then
	1060	if [[ $(echo $module_calls \| grep -c netcdf/3.6.3-intel) != 0 ]]
	1061	then
	1062	module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
	1063	fi
	1064	fi
[503]	1065	else
	1066	module_calls=""
[493]	1067	fi
	1068
[693]	1069	if [[ $remote_host = ibmkisti \|\| $remote_host = ibms \|\| $remote_host = ibmy ]]
[475]	1070	then
[1]	1071
[493]	1072	ssh ${remote_username}@${remote_addres} "$module_calls cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1073
[475]	1074	elif [[ $remote_host = ibmh ]]
	1075	then
[1]	1076
[493]	1077	print "$module_calls export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1078
[475]	1079	elif [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
	1080	then
[1]	1081
[622]	1082	# print ". /usr/share/modules/init/bash; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1083	print "eval \`/sw/swdist/bin/modulesinit\`; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1084
[475]	1085	elif [[ $remote_host = lctit ]]
	1086	then
[1]	1087
[475]	1088	echo " " > ${remote_host}_last_make_protokoll
	1089	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
	1090	do
	1091	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1092	done
[1]	1093
[475]	1094	elif [[ $remote_host = lcxt4 ]]
[1]	1095	then
	1096
[691]	1097	ssh ${remote_username}@${remote_addres} ". /opt/modules/default/init/ksh; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1098
[475]	1099	else
[1]	1100
[493]	1101	print "cd $module_calls ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1102
[475]	1103	fi
[1]	1104
[475]	1105	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
	1106	then
	1107	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
	1108	if [[ $silent = false ]]
[40]	1109	then
[475]	1110	answer=dummy
	1111	printf "\n"
	1112	while [[ "$answer" != c && "$answer" != k ]]
[40]	1113	do
[475]	1114	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
	1115	read answer
	1116	if [[ "$answer" = l ]]
	1117	then
	1118	more ${remote_host}_last_make_protokoll
	1119	fi
[40]	1120	done
[475]	1121	if [[ $answer = k ]]
[40]	1122	then
[475]	1123	locat=user_abort; exit
[1]	1124	fi
	1125	fi
[475]	1126	fi
[1]	1127
	1128
	1129
[475]	1130	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
	1131	printf "\n *** tar update on remote host ..."
	1132	if [[ $remote_host != lctit ]]
	1133	then
	1134	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod"
	1135	else
	1136	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	1137	# MIT SSH, DESHALB AUFRUF PER PIPE
	1138	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
	1139	fi
[1]	1140
	1141
[475]	1142	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
	1143	# printf "\n *** \"make clean\" on remote host ..."
	1144	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
	1145	# printf "\n"
[1]	1146
	1147
[25]	1148
	1149
[475]	1150	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
	1151	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	1152	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
	1153	elif [[ $compile_utility_programs = true ]]
	1154	then
	1155
	1156	printf "\n\n"
	1157	echo " *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
	1158	cd ${local_source_path}/../SCRIPTS
	1159
	1160	if [[ $remote_host != lctit ]]
[22]	1161	then
[475]	1162	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
	1163	else
[503]	1164	# TIT ERLAUBT NUR DIE AUSFUEHRUNG GANZ BESTIMMTER KOMMANDOS
[475]	1165	# MIT SSH, DESHALB AUFRUF PER PIPE
	1166	print "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_addres} 2>&1
	1167	fi
[22]	1168
[475]	1169	# KOPIEREN DER SCRIPTE
	1170	if [[ $local_host = decalpha ]]
	1171	then
[503]	1172	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTAENDIGEN PFADES
[475]	1173	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1174	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1175	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
	1176	/bin/scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
	1177	else
	1178	scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
	1179	fi
[22]	1180
[475]	1181	cd - > /dev/null
	1182	cd ${local_source_path}/../UTIL
[22]	1183
[27]	1184
[475]	1185	# KOPIEREN DER UTILITY-PROGRAMME
	1186	if [[ $local_host = decalpha ]]
	1187	then
	1188	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
	1189	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1190	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1191	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
	1192	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
	1193	else
	1194	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
	1195	fi
[27]	1196
	1197
[22]	1198
[475]	1199	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1200	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
	1201	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
	1202	# Z.B. DIE PFADE ZUM COMPILER)
	1203	echo " *** execute \"make\" on remote host"
[22]	1204
[475]	1205	if [[ $remote_host = nech ]]
	1206	then
[503]	1207	make_call_string="sxmake $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
[475]	1208	else
[503]	1209	make_call_string="make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
[475]	1210	fi
[22]	1211
[493]	1212	# generate command to load modules, if modules are given
	1213	if [[ "$modules" != "" ]]
	1214	then
[678]	1215	if [[ $remote_host = lctit ]]
	1216	then
	1217	module_calls=". $modules"
	1218	else
	1219	module_calls="module load ${modules};"
	1220	fi
[562]	1221
	1222	# bugfix for wrong netcdf module
	1223	if [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
	1224	then
	1225	if [[ $(echo $module_calls \| grep -c netcdf/3.6.3-intel) != 0 ]]
	1226	then
	1227	module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
	1228	fi
	1229	fi
[503]	1230	else
	1231	module_calls=""
[493]	1232	fi
	1233
[475]	1234	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
	1235	then
[22]	1236
[493]	1237	ssh ${remote_username}@${remote_addres} "$module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
[22]	1238
[475]	1239	elif [[ $remote_host = ibmh ]]
	1240	then
[22]	1241
[493]	1242	print "$module_calls export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres}
[22]	1243
[475]	1244	elif [[ $remote_host = lctit ]]
	1245	then
[22]	1246
[475]	1247	echo " " > ${remote_host}_last_make_protokoll
	1248	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
	1249	do
[493]	1250	print "$module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[475]	1251	done
[22]	1252
[475]	1253	elif [[ $remote_host = lcxt4 ]]
	1254	then
[22]	1255
[691]	1256	ssh ${remote_username}@${remote_addres} ". /opt/modules/default/init/ksh; $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
[22]	1257
[475]	1258	else
[407]	1259
[493]	1260	print "$module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[407]	1261
[475]	1262	fi
[22]	1263
[475]	1264	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
[22]	1265
[475]	1266	rm -rf ${remote_host}_last_make_protokoll
[22]	1267
[475]	1268	# make on local host
	1269	else
[22]	1270
[544]	1271	# workaround for lcxt4
	1272	if [[ $remote_host = lcxt4 ]]
	1273	then
	1274	. /opt/modules/default/init/ksh
	1275	fi
	1276
	1277	# first load modules, if given
	1278	if [[ "$modules" != "" ]]
	1279	then
[678]	1280	if [[ $remote_host = lctit ]]
	1281	then
	1282	. $modules
	1283	else
	1284	module load ${modules}
	1285	fi
[544]	1286	fi
	1287
	1288
[475]	1289	if [[ $compile_utility_programs = false ]]
	1290	then
[22]	1291
[475]	1292	# DEPOSITORY VERZEICHNIS ERZEUGEN, FALLS NOCH NICHT VORHANDEN
	1293	eval remote_md=$remote_md
	1294	if [[ ! -d $remote_md ]]
[40]	1295	then
[475]	1296	if mkdir $remote_md
[215]	1297	then
[475]	1298	printf "\n\n *** directory for make depository:"
	1299	printf "\n $remote_md"
	1300	printf "\n was created\n"
	1301	else
	1302	printf "\n +++ directory for make depository:"
	1303	printf "\n $remote_md"
	1304	printf "\n cannot be created"
	1305	locat=local_depository_path; exit
[215]	1306	fi
[475]	1307	fi
[215]	1308
[475]	1309	# QUELLTEXT-DATEIEN AUS REPOSITORY INS DEPOSITORY KOPIEREN
	1310	echo " "
	1311	echo " *** updating sources in $remote_md"
	1312	cd $remote_md
	1313	cp $local_source_path/${mainprog}_sources.tar .
	1314	tar xf ${mainprog}_sources.tar
[215]	1315
[475]	1316	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
	1317	echo " "
	1318	echo " *** execute \"make\" on local host"
[1]	1319
[475]	1320	make $make_options PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
[40]	1321
[475]	1322	if [[ $? != 0 ]]
	1323	then
	1324	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
	1325	if [[ $silent = false ]]
[1]	1326	then
[475]	1327	answer=dummy
	1328	printf "\n"
	1329	while [[ "$answer" != c && "$answer" != k ]]
	1330	do
	1331	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
	1332	read answer
	1333	if [[ "$answer" = l ]]
[1]	1334	then
[475]	1335	more ${remote_host}_last_make_protokoll
[1]	1336	fi
[475]	1337	done
	1338	if [[ $answer = k ]]
	1339	then
	1340	locat=user_abort; exit
[1]	1341	fi
	1342	fi
[475]	1343	fi
[1]	1344
	1345
[503]	1346	# TAR NEW VERSION ON LOCAL HOST
[475]	1347	printf "\n *** tar update on local host ..."
	1348	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
[1]	1349
[22]	1350
[475]	1351	# COMPILE THE UTILITY PROGRAMS
	1352	elif [[ $compile_utility_programs = true ]]
	1353	then
	1354	printf "\n\n"
	1355	echo " *** compiling the utility programs ..."
	1356	cd ${local_source_path}/../UTIL
[503]	1357
	1358	# TOUCH FILES IN ORDER TO FORCE COMPILATION FOR EVERY BLOCK
	1359	touch *.f90
	1360	make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
[475]	1361	cd - > /dev/null
[1]	1362	fi
	1363
	1364	fi
[475]	1365
[1]	1366	done
	1367
	1368
	1369	if [[ $host_found = false ]]
	1370	then
	1371	if [[ $host = all ]]
	1372	then
	1373	printf "\n +++ no hosts found in configuration file"
	1374	else
	1375	printf "\n +++ host \"$host\" not found in configuration file"
	1376	fi
	1377	locat=config_file; exit
	1378	fi
	1379
	1380
	1381
[503]	1382	# FINAL WORK
[1]	1383	rm -f hosts_found_in_config_file
	1384

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |