Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 588

Last change on this file since 588 was 562, checked in by raasch, 14 years ago
bugfixes for wrong netcdf/3.6.3 module, last revision 561, and setting of MPI_TYPE_DEPTH for netCDF4/HDF5 with mpt -library
Property svn:keywords set to `Id Rev`
File size: 47.0 KB

Rev	Line
[1]	1	#!/bin/ksh
[503]	2	# mbuild - script for compiling the PALM code and its utility programs
[169]	3	# $Id: mbuild 562 2010-09-13 13:48:16Z helmke $
[1]	4
[503]	5	# Procedure to compile code on local and remote hosts using the
	6	# make-mechanism. The source code must be provided on the local host.
[1]	7
[503]	8	# Last changes:
	9	# 06/05/02 - Siggi - start development
	10	# 12/06/02 - Siggi - first version finished
	11	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) included
	12	# 19/12/02 - Siggi - ibmb included
[1]	13	# 05/02/03 - Siggi - hostname nobela included
	14	# 04/03/03 - Siggi - host nech included
	15	# 06/03/03 - Siggi - make_call_string is echoed without '' to
	16	# file LAST_MAKE_CALL (otherwise error on NEC, because
	17	# '' are part of compiler options
	18	# 16/03/03 - Siggi - Two underscores are placed in front of every define
	19	# string, in case that palm.f90 version contains
	20	# such strings
	21	# 16/04/03 - Siggi - First extensions for linux machines
	22	# 24/06/03 - Siggi - host orkan included
	23	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
	24	# 24/07/03 - Siggi - host maestro admitted
	25	# 06/08/03 - Siggi - host gregale admitted
	26	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
	27	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
	28	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
	29	# (-D$OMP=OMP) in order to avoid problems with
	30	# OMP_NUM_THREADS
	31	# 09/01/04 - Siggi - action above cancelled
	32	# 28/01/04 - Siggi - action above re-cancelled
	33	# 08/03/04 - Siggi - host scirocco admitted
	34	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
	35	# the respective .f90 file is not listed in the makefile
	36	# and deletion is demanded by the user
	37	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
	38	# due to error in ssh installation (otherwise a prompt
	39	# for the password appears)
	40	# 23/07/04 - Siggi - changes due to the new berni configuration
	41	# (federation switch)
	42	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
	43	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
	44	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
	45	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
	46	# 24/04/05 - Siggi - netcdf support on lcmuk
	47	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
	48	# 12/05/05 - Siggi - netcdf support on ibm
	49	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
	50	# 18/05/05 - Siggi - netcdf support on nec
	51	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
	52	# 23/05/05 - Siggi - netcdf support on ibms
	53	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
	54	# 30/06/05 - Siggi - netcdf support on bora
	55	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
	56	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
	57	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
	58	# host gfdl5 (ibmy) admitted
	59	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
	60	# 20/01/06 - Siggi - cpp directive for ibmy
	61	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
	62	# 10/02/06 - Siggi - modifications for scp on decalpha
	63	# 13/04/06 - Siggi - ostria admitted
	64	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
	65	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
	66	# 29/05/05 - Siggi - atmos (lcide) admitted
	67	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
	68	# 24/11/06 - Siggi - breva and levanto admitted
	69	# 07/02/07 - Siggi - adapted for RIAM (neck)
[5]	70	# 10/02/07 - Siggi - all hpmuk-related code removed
[40]	71	# 02/03/07 - Siggi - compilation of utility programs and transfer of
[27]	72	# scripts to remote hosts added (option -u)
[66]	73	# 14/03/07 - Siggi - fimm admitted, revision number added to terminal
	74	# output
[69]	75	# 16/03/07 - Siggi - adjustments (netcdf) for lctit
	76	# adjustments for running under pdksh, local ip-addres
	77	# is not determined any more
[82]	78	# 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
	79	# from configuration file
	80	# host identifier (local_host) is read from config file
[116]	81	# 10/10/07 - Siggi - bugfix: handling of comment lines
[181]	82	# 18/07/08 - Siggi - adapted for lcsgih
	83	# 21/07/08 - Siggi - mainprog (executable) is added to the tar-file
	84	# ({mainprog}_current_version)
[206]	85	# 02/10/08 - Siggi - adapted for lcxt4
[215]	86	# 14/11/08 - Siggi - update mechanism completely revised: source tarfile
	87	# remains in source directory, one depository per block
[266]	88	# (given in the config-file) is created, allways all
	89	# files from the source directory are copied to the
	90	# respective depository, no additional file checks are
	91	# done any more (version 2.1)
[224]	92	# 13/01/09 - Marcus- re-enable compilation more than once on lcmuk (as on
	93	# other machines)
[266]	94	# 21/03/09 - Siggi - -u copies also copies process_dvr_output and
	95	# .dvrserver.config
[305]	96	# 21/04/09 - Siggi - adjustments for new IBM at DKRZ, which is now ibmh
[367]	97	# 25/08/09 - BjornM- adapted for lck
[407]	98	# 01/12/09 - BjornM- re-adjustments for lcxt4
[437]	99	# 01/02/10 - Siggi - adjustments for lcxt5m
[475]	100	# 03/02/10 - Siggi - make options (mopts) to be set by configuration file
	101	# implemented, remoted mode option -r completely
	102	# removed, t3e related parts removed
[492]	103	# 26/02/10 - BjornM- re-adjustments for lcxt4 (new modules)
[493]	104	# 01/03/10 - Siggi - mpilib replaced by modules: explicit module settings
	105	# removed; modules should now be given in the
	106	# configuration file
[503]	107	# 02/03/10 - Siggi - utility programs are created separately for each
	108	# block in the configuration file,
	109	# parallel make for utility programs
[508]	110	# 12/03/10 - Siggi - bugfix: remode_md was given a wrong value
[544]	111	# 16/08/10 - BjornM- bugfix: call of modules on local host, new workaround
	112	# for lcxt4
[555]	113	# 07/09/10 - Siggi - bugfix for wrong netcdf/3.6.3 module on lcsgi
[1]	114
	115
[508]	116
[503]	117	# VARIABLE DECLARATIONS + DEFAULT VALUES
[22]	118	compile_utility_programs=false
[1]	119	config_file=.mrun.config
[67]	120	fimm=false
[1]	121	host=all
	122	host_found=false
	123	locat=normal
	124	makefile=""
[493]	125	module_calls=""
[1]	126	scirocco=false
	127	silent=false
	128	suf=f90
	129	update=false
[83]	130	working_directory=`pwd`
[1]	131
	132	typeset -i ih ihost=0
	133
[66]	134	typeset -R30 calltime
[1]	135	typeset -L20 column1
	136	typeset -L50 column2
	137	typeset -L70 column3
[215]	138	typeset -L40 version="MBUILD 2.1 Rev$Rev: 562 $"
[1]	139
[503]	140	# ERROR HANDLING
	141	# IN CASE OF EXIT:
[83]	142	trap 'rm -rf $working_directory/tmp_mbuild
[69]	143	if [[ $locat != normal ]]
[1]	144	then
	145	printf "\n\n +++ mbuild killed \n\n"
	146	else
	147	printf "\n\n *** mbuild finished \n\n"
	148	fi' exit
	149
	150
[503]	151	# IN CASE OF TERMINAL-BREAK:
[83]	152	trap 'rm -rf $working_directory/tmp_mbuild
[69]	153	printf "\n\n +++ mbuild killed by \"^C\" \n\n"
[1]	154	exit
	155	' 2
	156
	157
[215]	158	tmp_mbuild=${working_directory}/tmp_mbuild
[1]	159
[503]	160	# READ SHELLSCRIPT-OPTIONS
[475]	161	while getopts :c:h:m:s:u option
[1]	162	do
	163	case $option in
	164	(c) config_file=$OPTARG;;
	165	(h) host=$OPTARG;;
	166	(m) makefile=$OPTARG;;
	167	(s) suf=$OPTARG;;
[22]	168	(u) compile_utility_programs=true;;
[1]	169	(\?) printf "\n +++ unknown option $OPTARG \n";
	170	locat=parameter; exit;;
	171	esac
	172	done
	173
	174
	175
[503]	176	# CHECK, IF CONFIGURATION-FILE EXISTS
[82]	177	if [[ ! -f $config_file ]]
	178	then
	179	printf "\n +++ configuration file: "
	180	printf "\n $config_file"
	181	printf "\n does not exist"
	182	locat=configuration; exit
	183	fi
	184
	185
	186
[503]	187	# DETERMINE THE LOCAL HOST
[1]	188	local_host_real_name=$(hostname)
[69]	189	# local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
	190
[1]	191
[82]	192
[503]	193	# DETERMINE HOST-IDENTIFIER (local_host) FROM THE CONFIG-FILE
[82]	194	line=""
[215]	195	grep "%host_identifier" $config_file > $tmp_mbuild
[82]	196	while read line
	197	do
[116]	198	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
[82]	199	then
	200	HOSTNAME=`echo $line \| cut -d" " -s -f2`
	201	host_identifier=`echo $line \| cut -d" " -s -f3`
[83]	202	if [[ $local_host_real_name = $HOSTNAME ]]
[82]	203	then
	204	local_host=$host_identifier
	205	break
	206	fi
	207	fi
[215]	208	done < $tmp_mbuild
[82]	209
	210	if [[ "$local_host" = "" ]]
	211	then
	212	printf "\n +++ no host identifier found in configuration file \"$config_file\""
	213	printf "\n for local host \"$local_host_real_name\"."
	214	printf "\n Please add line"
	215	printf "\n \"\%host_identifier $local_host_real_name <identifier>\""
	216	printf "\n to the configuration file."
	217	locat=local_host; exit
	218	fi
	219
	220
	221
[1]	222	[[ $local_host_real_name = scirocco ]] && scirocco=true
[67]	223	[[ $local_host_real_name = fimm.bccs.uib.no ]] && fimm=true
[1]	224
	225
	226
	227	if [[ $local_host != ibms ]]
	228	then
	229	config_file=$PWD/$config_file
	230	else
	231	config_file=`pwd`/$config_file
	232	fi
	233
	234
	235
[503]	236	# DETERMINE USER NAME ON LOCAL HOST FROM THE CONFIG-FILE
[1]	237	line=""
[215]	238	grep " $local_host" $config_file \| grep "%remote_username" > $tmp_mbuild
[69]	239	while read line
[1]	240	do
[116]	241	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
[1]	242	then
	243	local_username=`echo $line \| cut -d" " -s -f2`
	244	fi
[215]	245	done < $tmp_mbuild
[1]	246
[82]	247
[1]	248	if [[ "$local_username" = "" ]]
	249	then
	250	printf "\n +++ no user name found in configuration file"
	251	printf "\n for local host \"$local_host\" "
	252	locat=config_file; exit
	253	fi
	254
	255
[503]	256	# DETERMINE LOCAL SOURCE-CODE PATH.
	257	# FIRST CHECK, IF A GLOBAL SOURCE-CODE PATH HAS BEEN DECLARED FOR ALL HOSTS.
	258	# THEREFORE, FIRST SET ALL GLOBAL VARIABLES DECLARED IN THE CONFIG-FILE,
	259	# BECAUSE THEY MAY BE USED AS PART OF THE PATH NAME.
[5]	260	line=""
[215]	261	grep "%" $config_file > $tmp_mbuild
[69]	262	while read line
[5]	263	do
[116]	264	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" && $(echo $line \| cut -c1) != "#" ]]
[1]	265	then
[5]	266	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
	267	value=`echo $line \| cut -d" " -s -f2`
[8]	268	eval export $var=\$value
[1]	269	fi
[215]	270	done < $tmp_mbuild
[1]	271
[503]	272	# NOW CHECK, IF A GLOBAL SOURCE-CODE-PATH HAS BEEN DECLARED
[1]	273	line=""
[215]	274	grep "%source_path" $config_file > $tmp_mbuild
[69]	275	while read line
[1]	276	do
	277	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	278	then
	279	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
	280	then
	281	global_source_path=`echo $line \| cut -d" " -s -f2`
	282	fi
	283	fi
[215]	284	done < $tmp_mbuild
[1]	285
	286	line=""
[215]	287	grep " $local_host" $config_file \| grep "%source_path" > $tmp_mbuild
[69]	288	while read line
[1]	289	do
	290	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	291	then
	292	local_source_path=`echo $line \| cut -d" " -s -f2`
	293	fi
[215]	294	done < $tmp_mbuild
[1]	295
	296	if [[ "$local_source_path" = "" ]]
	297	then
	298	if [[ "$global_source_path" != "" ]]
	299	then
	300	local_source_path=$global_source_path
	301	else
	302	printf "\n +++ no source path found in configuration file"
	303	printf "\n for local host \"$local_host\" "
	304	printf "\n please set \"\%source_path\" in configuration file"
	305	locat=config_file; exit
	306	fi
	307	fi
	308	eval local_source_path=$local_source_path
[8]	309	eval local_source_path=$local_source_path
[1]	310
	311
[215]	312
[503]	313	# DETERMINE GLOBAL DEPOSITORY-PATH
[1]	314	line=""
[215]	315	grep "%depository_path" $config_file > $tmp_mbuild
[69]	316	while read line
[1]	317	do
	318	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	319	then
	320	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
	321	then
	322	global_depository_path=`echo $line \| cut -d" " -s -f2`
	323	fi
	324	fi
[215]	325	done < $tmp_mbuild
[1]	326
	327
	328
[503]	329	# CHECK, IF A MAIN PROGRAM HAS BEEN DEFINED IN THE CONFIG-FILE
[5]	330	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
	331	then
	332	printf "\n +++ no main program or more than one main program defined"
	333	printf "\n in configuration file"
	334	locat=configuration; exit
	335	else
	336	line=`grep "%mainprog" $config_file`
	337	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
	338	then
	339	printf "\n +++ no main program defined in configuration file"
	340	locat=configuration; exit
	341	fi
	342	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
	343	fi
	344
	345
	346
[503]	347	# CHECK IF MAKEFILE EXITS
[1]	348	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
	349	if [[ ! -f $makefile ]]
	350	then
	351	printf "\n +++ makefile: "
	352	printf "\n $makefile"
	353	printf "\n does not exist"
	354	locat=makefile; exit
	355	fi
	356
	357
[503]	358	# HEADER-OUTPUT (PART1: MESSAGES CONCERNING THE LOCAL HOST)
[1]	359	calltime=$(date)
	360	printf "\n"
	361	printf "#------------------------------------------------------------------------# \n"
	362	printf "\| $version$calltime \| \n"
	363	printf "\| \| \n"
	364	column1="called on:"; column2=$local_host_real_name
	365	printf "\| $column1$column2 \| \n"
	366	column1="local username:"; column2=$local_username
	367	printf "\| $column1$column2 \| \n"
	368	column1="local IP-addres:"; column2=$local_addres
	369	printf "\| $column1$column2 \| \n"
	370	column1="config file:"; column2=$config_file
	371	printf "\| $column1$column2 \| \n"
	372	column1="makefile:"; column2=$makefile
	373	printf "\| $column1$column2 \| \n"
	374	column1="local source path:"; column2=$local_source_path
	375	printf "\| $column1$column2 \| \n"
	376	printf "#------------------------------------------------------------------------# \n"
	377
	378	# printf "\| \| \n"
	379
	380
[40]	381	if [[ $compile_utility_programs = false ]]
	382	then
[1]	383
[503]	384	# IN ANY CASE, GIVE ALL FILES WRITE-PERMIT, IN ORDER TO AVOID PROBLEMS
	385	# WITH OVERWRITING FILES ON THE REMOTE HOST
[215]	386	cd $local_source_path
	387	printf "\n\n *** tar of makefile and source files in $local_source_path"
[40]	388	tar -cf ${mainprog}_sources.tar Makefile *.$suf
	389	printf "\n"
[1]	390
[40]	391	fi
[1]	392
	393
[40]	394
[503]	395	# GET CONFIRMATION TO CONTINUE
[1]	396	if [[ $host = all ]]
	397	then
	398	printf "\n *** updates will be made for ALL hosts found in"
	399	printf "\n the configuration file"
	400	else
	401	printf "\n *** update will be made for host \"$host\" "
	402	fi
	403
	404	if [[ $silent = false ]]
	405	then
	406	answer=dummy
	407	printf "\n\n"
	408	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
	409	do
	410	printf " >>> continue (y/n) ? "
	411	read answer
	412	done
	413	if [[ $answer = n \|\| $answer = N ]]
	414	then
	415	locat=user_abort; exit
	416	fi
	417	fi
	418
	419
	420
	421
	422	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
	423	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
	424	printf "\n *** scanning configuration file for host(s) ..."
	425
[215]	426	grep %fopts $config_file > $tmp_mbuild
[69]	427	while read line
[1]	428	do
	429	# KOMMENTARZEILEN UEBERSPRINGEN
	430	[[ $(echo $line \| cut -c1) = "#" ]] && continue
	431	(( ihost = ihost + 1 ))
	432	hostline[$ihost]="$line"
[215]	433	done < $tmp_mbuild
[1]	434
	435
	436	while (( ih < ihost ))
	437	do
	438
	439	(( ih = ih + 1 ))
	440
	441	# REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
	442	# NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
	443	# SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
	444	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
	445	remote_host=`echo $remote_host_string \| cut -d" " -f1`
	446	if [[ $host != all ]]
	447	then
	448	[[ $remote_host != $host ]] && continue
	449	fi
	450	host_found=true
	451	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
	452	if [[ $condition1 = $remote_host ]]
	453	then
	454	condition1=""
	455	else
	456	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
	457	fi
	458
[493]	459	modules=""
[82]	460	netcdf_inc=""
	461	netcdf_lib=""
[1]	462
	463	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
	464	case $remote_host in
[116]	465	(lcmuk) remote_addres=130.75.105.2;;
[181]	466	(lcsgib) remote_addres=130.73.232.102;;
[346]	467	(lcsgih) remote_addres=130.75.4.102;;
[367]	468	(lck) remote_addres=165.132.26.61;;
[83]	469	(lctit) remote_addres=172.17.75.161;;
[206]	470	(lcxt4) remote_addres=129.177.20.113;;
[437]	471	(lcxt5m) remote_addres=193.166.211.144;;
[83]	472	(decalpha) remote_addres=165.132.26.56;;
[305]	473	(ibmh) remote_addres=136.172.40.15;;
[83]	474	(ibms) remote_addres=150.183.5.101;;
	475	(ibmy) remote_addres=165.132.26.58;;
	476	(nech) remote_addres=136.172.44.192;;
	477	(neck) remote_addres=133.5.178.11;;
	478	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
	479	(*) if [[ $local_host != $remote_host ]]
[1]	480	then
[83]	481	printf "\n +++ remote host \"$remote_host\" unknown";
[503]	482	printf "\n please inform PALM group support!"
[1]	483	fi;;
	484	esac
	485
	486
	487	# REMOTE-USERNAMEN ERMITTELN
	488	line=""
[116]	489	found=false
[215]	490	grep "$remote_host_string" $config_file \| grep "%remote_username" > $tmp_mbuild
[69]	491	while read line1
[1]	492	do
[116]	493
[1]	494	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	495	then
	496	line="$line1"
	497	fi
[116]	498
	499	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	500	then
	501	remote_username=`echo $line \| cut -d" " -s -f2`
	502	found=true
	503	fi
	504
[215]	505	done < $tmp_mbuild
[1]	506
[116]	507	if [[ $found = false ]]
[1]	508	then
	509	printf "\n +++ no remote username found in configuration file"
	510	printf "\n for \"$remote_host_string\" "
	511	locat=config_file; exit
	512	fi
	513
	514
	515	# REMOTE-QUELLTEXTPFAD ERMITTELN
	516	line=""
[54]	517	remote_source_path=""
[215]	518	grep "$remote_host_string" $config_file \| grep "%source_path" > $tmp_mbuild
[69]	519	while read line1
[1]	520	do
[116]	521
[1]	522	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	523	then
	524	line="$line1"
	525	fi
[116]	526
	527	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	528	then
	529	remote_source_path=`echo $line \| cut -d" " -s -f2`
	530	fi
	531
[215]	532	done < $tmp_mbuild
[1]	533
	534	if [[ "$remote_source_path" = "" ]]
	535	then
	536	if [[ "$global_source_path" != "" ]]
	537	then
	538	remote_source_path=$global_source_path
	539	else
	540	printf "\n +++ no source path found in configuration file"
	541	printf "\n for \"$remote_host_string\" "
	542	locat=config_file; exit
	543	fi
	544	fi
	545
[22]	546	remote_ud=${remote_source_path}/../UTIL
[24]	547	remote_ud=$(eval echo $remote_ud)
[1]	548
[54]	549
[1]	550	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
[54]	551	remote_md=""
[1]	552	line=""
[215]	553	grep "$remote_host_string" $config_file \| grep "%depository_path" > $tmp_mbuild
[69]	554	while read line1
[1]	555	do
[116]	556
[1]	557	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	558	then
	559	line="$line1"
	560	fi
[116]	561
	562	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	563	then
	564	remote_md=`echo $line \| cut -d" " -s -f2`
	565	fi
	566
[215]	567	done < $tmp_mbuild
[1]	568
	569	if [[ "$remote_md" = "" ]]
	570	then
	571	if [[ "$global_depository_path" != "" ]]
	572	then
	573	remote_md=$global_depository_path
	574	else
	575	printf "\n +++ no depository path found in configuration file"
	576	printf "\n for \"$remote_host_string\" "
	577	printf "\n please set \"\%depository_path\" in configuration file"
	578	locat=config_file; exit
	579	fi
	580	fi
	581
[8]	582	remote_md=$(eval echo $remote_md)
[503]	583	block=""
	584	[[ "$condition1" != "" ]] && block=_$condition1
	585	[[ "$condition2" != "" ]] && block=${block}_$condition2
[508]	586	remote_md=${remote_md}$block
[1]	587
[8]	588
[1]	589	# COMPILERNAMEN ERMITTELN
	590	line=""
[116]	591	found=false
[215]	592	grep "$remote_host_string" $config_file \| grep "%compiler_name " > $tmp_mbuild
[69]	593	while read line1
[1]	594	do
[116]	595
[1]	596	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	597	then
	598	line="$line1"
	599	fi
[116]	600
	601	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	602	then
	603	compiler_name=`echo $line \| cut -d" " -s -f2`
	604	found=true
	605	fi
	606
[215]	607	done < $tmp_mbuild
[1]	608
[116]	609	if [[ $found = false ]]
[1]	610	then
	611	printf "\n +++ no compiler name found in configuration file"
	612	printf "\n for \"$remote_host_string\" "
	613	locat=config_file; exit
	614	fi
	615
	616
[27]	617	# BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
	618	# SERIELLER COMPILERNAME ERMITTELT WERDEN
	619	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
	620	then
	621	line=""
[116]	622	found=false
[215]	623	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" > $tmp_mbuild
[69]	624	while read line1
[27]	625	do
[116]	626
[27]	627	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	628	then
	629	line="$line1"
	630	fi
[116]	631
	632	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	633	then
	634	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
	635	found=true
	636	fi
	637
[215]	638	done < $tmp_mbuild
[1]	639
[116]	640	if [[ $found = false ]]
[27]	641	then
[28]	642	printf "\n +++ no serial compiler name found in configuration file"
[27]	643	printf "\n for \"$remote_host_string\" "
	644	locat=config_file; exit
	645	fi
	646	else
	647	compiler_name_ser=$compiler_name
	648	fi
	649
	650
	651
[82]	652	# PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
	653	line=""
[116]	654	found=false
[215]	655	grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
[82]	656	while read line1
	657	do
[116]	658
[82]	659	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	660	then
	661	line="$line1"
	662	fi
[116]	663
	664	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	665	then
	666	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	667	cpp_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	668	found=true
	669	fi
	670
[215]	671	done < $tmp_mbuild
[116]	672
	673	if [[ $found = false ]]
[82]	674	then
	675	printf "\n +++ no preprocessor options found in configuration file"
	676	printf "\n for \"$remote_host_string\" "
	677	locat=config_file; exit
	678	fi
	679
[116]	680
[82]	681	# RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
	682	for string in $remote_host_string
	683	do
	684	if [[ $(echo $remote_host \| cut -c1-2) = lc && $(echo $string \| cut -c1-2) = lc ]]
	685	then
	686	cpp_options="$cpp_options -D__lc "
[83]	687	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $(echo $string \| cut -c1-3) = ibm ]]
	688	then
	689	cpp_options="${cpp_options},-D__ibm"
	690	elif [[ $(echo $remote_host \| cut -c1-3) = nec && $(echo $string \| cut -c1-3) = nec ]]
	691	then
	692	cpp_options="${cpp_options} -D__nec"
[82]	693	else
[83]	694	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
	695	then
	696	cpp_options="${cpp_options},-D__$string"
	697	else
	698	cpp_options="$cpp_options -D__$string "
	699	fi
[82]	700	fi
	701	done
	702
	703
	704
	705	# NETCDF-OPTIONEN ERMITTELN
	706	line=""
[215]	707	grep "$remote_host_string" $config_file \| grep "%netcdf_inc" > $tmp_mbuild
[82]	708	while read line1
	709	do
[116]	710
[82]	711	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	712	then
	713	line="$line1"
	714	fi
[116]	715
	716	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	717	then
	718	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	719	netcdf_inc=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	720	fi
	721
[215]	722	done < $tmp_mbuild
[82]	723
	724	line=""
[215]	725	grep "$remote_host_string" $config_file \| grep "%netcdf_lib" > $tmp_mbuild
[82]	726	while read line1
	727	do
[116]	728
[82]	729	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	730	then
	731	line="$line1"
	732	fi
[116]	733
	734	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	735	then
	736	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	737	netcdf_lib=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	738	fi
	739
[215]	740	done < $tmp_mbuild
[82]	741
	742
	743
[475]	744	# get make options
	745	line=""
	746	found=false
	747	grep "$remote_host_string" $config_file \| grep "%mopts" > $tmp_mbuild
	748	while read line1
	749	do
	750
	751	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	752	then
	753	line="$line1"
	754	fi
	755
	756	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	757	then
	758	# remove colons from directive string
	759	make_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	760
	761	fi
	762
	763	done < $tmp_mbuild
	764
	765
	766
[1]	767	# COMPILEROPTIONEN ERMITTELN
	768	line=""
[116]	769	found=false
[215]	770	grep "$remote_host_string" $config_file \| grep "%fopts" > $tmp_mbuild
[69]	771	while read line1
[1]	772	do
[116]	773
[1]	774	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	775	then
	776	line="$line1"
	777	fi
[116]	778
	779	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	780	then
	781	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	782	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	783	found=true
	784
	785	# NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
	786	compiler_options="$compiler_options $netcdf_inc"
	787	fi
	788
[215]	789	done < $tmp_mbuild
[116]	790
	791	if [[ $found = false ]]
[1]	792	then
	793	printf "\n +++ no compiler options found in configuration file"
	794	printf "\n for \"$remote_host_string\" "
	795	locat=config_file; exit
	796	fi
[82]	797
[1]	798
	799
[503]	800	# get modules to be loaded
[221]	801	line=""
[493]	802	grep "$remote_host_string" $config_file \| grep "%modules" > $tmp_mbuild
[221]	803	while read line1
	804	do
	805
	806	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	807	then
	808	line="$line1"
	809	fi
	810
	811	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	812	then
	813	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
[493]	814	modules=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
[221]	815	fi
	816
	817	done < $tmp_mbuild
	818
	819
	820
	821
[1]	822	# LADER-OPTIONEN ERMITTELN
	823	line=""
[116]	824	found=false
[215]	825	grep "$remote_host_string" $config_file \| grep "%lopts" > $tmp_mbuild
[69]	826	while read line1
[1]	827	do
[116]	828
[1]	829	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	830	then
	831	line="$line1"
	832	fi
[116]	833
	834	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	835	then
	836	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	837	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	838	found=true
	839
	840	# NETCDF-LIBRARY HINZUFUEGEN
	841	loader_options="$loader_options $netcdf_lib"
	842	fi
	843
[215]	844	done < $tmp_mbuild
[1]	845
[116]	846	if [[ $found = false ]]
[1]	847	then
	848	printf "\n +++ no loader options found in configuration file"
	849	printf "\n for \"$remote_host_string\" "
	850	locat=config_file; exit
	851	fi
[82]	852
[1]	853
	854	printf "\n\n#------------------------------------------------------------------------# \n"
	855	if [[ $remote_host = $local_host ]]
	856	then
	857	column1="remote_host:"; column2="$remote_host (= local host!)"
	858	else
	859	column1="remote_host:"; column2=$remote_host
	860	fi
	861	printf "\| $column1$column2 \| \n"
	862	printf "\| \| \n"
	863	column1="conditions:"; column2="$condition1 $condition2"
	864	printf "\| $column1$column2 \| \n"
	865	column1="make depository:"; column2=$remote_md
	866	printf "\| $column1$column2 \| \n"
[215]	867	line=$(echo "$remote_md" \| cut -c51-)
	868	while [[ "$line" != "" ]]
	869	do
	870	column1=""
	871	column2=$line
	872	printf "\| $column1$column2 \| \n"
	873	line=$(echo "$line" \| cut -c51-)
	874	done
[25]	875	if [[ $compile_utility_programs = true ]]
	876	then
	877	column1="utility directory:"; column2=$remote_ud
	878	printf "\| $column1$column2 \| \n"
	879	fi
[1]	880	column1="username:"; column2=$remote_username
	881	printf "\| $column1$column2 \| \n"
	882	column1="addres:"; column2=$remote_addres
	883	printf "\| $column1$column2 \| \n"
	884	column1="compiler:"; column2=$compiler_name
	885	printf "\| $column1$column2 \| \n"
[28]	886	if [[ $compile_utility_programs = true ]]
	887	then
	888	column1="serial compiler:"; column2=$compiler_name_ser
	889	printf "\| $column1$column2 \| \n"
	890	fi
[475]	891	if [[ "$make_options" != "" ]]
	892	then
	893	column1="make options:"; column2=$make_options
	894	printf "\| $column1$column2 \| \n"
	895	fi
[1]	896	column1="cpp options:"; column2=$cpp_options
	897	printf "\| $column1$column2 \| \n"
	898	line=$(echo "$cpp_options" \| cut -c51-)
	899	while [[ "$line" != "" ]]
	900	do
	901	column1=""
	902	column2=$line
	903	printf "\| $column1$column2 \| \n"
	904	line=$(echo "$line" \| cut -c51-)
	905	done
	906	column1="compiler options:"; column2=$compiler_options
	907	printf "\| $column1$column2 \| \n"
	908	line=$(echo "$compiler_options" \| cut -c51-)
	909	while [[ "$line" != "" ]]
	910	do
	911	column1=""
	912	column2=$line
	913	printf "\| $column1$column2 \| \n"
	914	line=$(echo "$line" \| cut -c51-)
	915	done
	916	column1="loader options:"; column2=$loader_options
	917	printf "\| $column1$column2 \| \n"
	918	line=$(echo "$loader_options" \| cut -c51-)
	919	while [[ "$line" != "" ]]
	920	do
	921	column1=""
	922	column2=$line
	923	printf "\| $column1$column2 \| \n"
	924	line=$(echo "$line" \| cut -c51-)
	925	done
[493]	926	if [[ $modules != "" ]]
	927	then
	928	column1="modules to be load:"; column2=$modules
	929	printf "\| $column1$column2 \| \n"
	930	line=$(echo "$modules" \| cut -c51-)
	931	while [[ "$line" != "" ]]
	932	do
	933	column1=""
	934	column2=$line
	935	printf "\| $column1$column2 \| \n"
	936	line=$(echo "$line" \| cut -c51-)
	937	done
	938	fi
[1]	939	printf "#------------------------------------------------------------------------# \n"
	940
	941	if [[ $silent = false ]]
	942	then
	943	answer=dummy
	944	printf "\n\n"
	945	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
	946	do
	947	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
	948	read answer
	949	done
	950	if [[ $answer = a \|\| $answer = A ]]
	951	then
	952	locat=user_abort; exit
	953	fi
	954	if [[ $answer = c \|\| $answer = C ]]
	955	then
[503]	956	silent=true
[1]	957	fi
	958	if [[ $answer = s \|\| $answer = S ]]
	959	then
	960	continue
	961	fi
	962	fi
	963
	964
[475]	965	# make on remote host
	966	if [[ $remote_host != $local_host ]]
[1]	967	then
	968
[475]	969	if [[ $compile_utility_programs = false ]]
[1]	970	then
	971
[475]	972	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	973	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
	974	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
	975	if [[ $remote_host != lctit ]]
	976	then
	977	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
	978	else
	979	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	980	# MIT SSH, DESHALB AUFRUF PER PIPE
	981	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
	982	fi
	983	if [[ $local_host = decalpha ]]
	984	then
	985	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
	986	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	987	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	988	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
	989	/bin/scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
	990	else
	991	scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
	992	fi
[1]	993
	994
	995
[475]	996	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
	997	echo " *** untar previous update on remote host, if existing"
	998	if [[ $remote_host != lctit ]]
	999	then
	1000	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
	1001	else
	1002	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	1003	# MIT SSH, DESHALB AUFRUF PER PIPE
	1004	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
	1005	fi
[1]	1006
	1007
[475]	1008	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
	1009	echo " *** untar actual sources on remote host"
	1010	if [[ $remote_host != lctit ]]
	1011	then
	1012	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
	1013	else
	1014	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	1015	# MIT SSH, DESHALB AUFRUF PER PIPE
	1016	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
	1017	fi
[1]	1018
	1019
[475]	1020	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1021	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
	1022	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
	1023	# Z.B. DIE PFADE ZUM COMPILER)
	1024	echo " *** execute \"make\" on remote host"
[1]	1025
[493]	1026
	1027	# generate make call with make options
[475]	1028	if [[ $remote_host = nech ]]
	1029	then
	1030	make_call_string="sxmake $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1031	else
	1032	make_call_string="make $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1033	fi
[1]	1034
[493]	1035	# generate command to load modules, if modules are given
	1036	if [[ "$modules" != "" ]]
	1037	then
	1038	module_calls="module load ${modules};"
[555]	1039
	1040	# bugfix for wrong netcdf module
	1041	if [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
	1042	then
	1043	if [[ $(echo $module_calls \| grep -c netcdf/3.6.3-intel) != 0 ]]
	1044	then
	1045	module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
	1046	fi
	1047	fi
[503]	1048	else
	1049	module_calls=""
[493]	1050	fi
	1051
[475]	1052	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
	1053	then
[1]	1054
[493]	1055	ssh ${remote_username}@${remote_addres} "$module_calls cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1056
[475]	1057	elif [[ $remote_host = ibmh ]]
	1058	then
[1]	1059
[493]	1060	print "$module_calls export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1061
[475]	1062	elif [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
	1063	then
[1]	1064
[493]	1065	print ". /usr/share/modules/init/bash; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1066
[475]	1067	elif [[ $remote_host = lctit ]]
	1068	then
[1]	1069
[475]	1070	echo " " > ${remote_host}_last_make_protokoll
	1071	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
	1072	do
	1073	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1074	done
[1]	1075
[475]	1076	elif [[ $remote_host = lcxt4 ]]
[1]	1077	then
	1078
[493]	1079	print ". /opt/modules/default/init/ksh; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1080
[475]	1081	else
[1]	1082
[493]	1083	print "cd $module_calls ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1084
[475]	1085	fi
[1]	1086
[475]	1087	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
	1088	then
	1089	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
	1090	if [[ $silent = false ]]
[40]	1091	then
[475]	1092	answer=dummy
	1093	printf "\n"
	1094	while [[ "$answer" != c && "$answer" != k ]]
[40]	1095	do
[475]	1096	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
	1097	read answer
	1098	if [[ "$answer" = l ]]
	1099	then
	1100	more ${remote_host}_last_make_protokoll
	1101	fi
[40]	1102	done
[475]	1103	if [[ $answer = k ]]
[40]	1104	then
[475]	1105	locat=user_abort; exit
[1]	1106	fi
	1107	fi
[475]	1108	fi
[1]	1109
	1110
	1111
[475]	1112	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
	1113	printf "\n *** tar update on remote host ..."
	1114	if [[ $remote_host != lctit ]]
	1115	then
	1116	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod"
	1117	else
	1118	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	1119	# MIT SSH, DESHALB AUFRUF PER PIPE
	1120	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
	1121	fi
[1]	1122
	1123
[475]	1124	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
	1125	# printf "\n *** \"make clean\" on remote host ..."
	1126	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
	1127	# printf "\n"
[1]	1128
	1129
[25]	1130
	1131
[475]	1132	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
	1133	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	1134	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
	1135	elif [[ $compile_utility_programs = true ]]
	1136	then
	1137
	1138	printf "\n\n"
	1139	echo " *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
	1140	cd ${local_source_path}/../SCRIPTS
	1141
	1142	if [[ $remote_host != lctit ]]
[22]	1143	then
[475]	1144	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
	1145	else
[503]	1146	# TIT ERLAUBT NUR DIE AUSFUEHRUNG GANZ BESTIMMTER KOMMANDOS
[475]	1147	# MIT SSH, DESHALB AUFRUF PER PIPE
	1148	print "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_addres} 2>&1
	1149	fi
[22]	1150
[475]	1151	# KOPIEREN DER SCRIPTE
	1152	if [[ $local_host = decalpha ]]
	1153	then
[503]	1154	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTAENDIGEN PFADES
[475]	1155	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1156	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1157	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
	1158	/bin/scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
	1159	else
	1160	scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
	1161	fi
[22]	1162
[475]	1163	cd - > /dev/null
	1164	cd ${local_source_path}/../UTIL
[22]	1165
[27]	1166
[475]	1167	# KOPIEREN DER UTILITY-PROGRAMME
	1168	if [[ $local_host = decalpha ]]
	1169	then
	1170	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
	1171	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1172	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1173	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
	1174	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
	1175	else
	1176	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
	1177	fi
[27]	1178
	1179
[22]	1180
[475]	1181	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1182	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
	1183	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
	1184	# Z.B. DIE PFADE ZUM COMPILER)
	1185	echo " *** execute \"make\" on remote host"
[22]	1186
[475]	1187	if [[ $remote_host = nech ]]
	1188	then
[503]	1189	make_call_string="sxmake $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
[475]	1190	else
[503]	1191	make_call_string="make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
[475]	1192	fi
[22]	1193
[493]	1194	# generate command to load modules, if modules are given
	1195	if [[ "$modules" != "" ]]
	1196	then
	1197	module_calls="module load ${modules};"
[562]	1198
	1199	# bugfix for wrong netcdf module
	1200	if [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
	1201	then
	1202	if [[ $(echo $module_calls \| grep -c netcdf/3.6.3-intel) != 0 ]]
	1203	then
	1204	module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
	1205	fi
	1206	fi
[503]	1207	else
	1208	module_calls=""
[493]	1209	fi
	1210
[475]	1211	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
	1212	then
[22]	1213
[493]	1214	ssh ${remote_username}@${remote_addres} "$module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
[22]	1215
[475]	1216	elif [[ $remote_host = ibmh ]]
	1217	then
[22]	1218
[493]	1219	print "$module_calls export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres}
[22]	1220
[475]	1221	elif [[ $remote_host = lctit ]]
	1222	then
[22]	1223
[475]	1224	echo " " > ${remote_host}_last_make_protokoll
	1225	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
	1226	do
[493]	1227	print "$module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[475]	1228	done
[22]	1229
[475]	1230	elif [[ $remote_host = lcxt4 ]]
	1231	then
[22]	1232
[493]	1233	print ". /opt/modules/default/init/ksh; $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[22]	1234
[475]	1235	else
[407]	1236
[493]	1237	print "$module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[407]	1238
[475]	1239	fi
[22]	1240
[475]	1241	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
[22]	1242
[475]	1243	rm -rf ${remote_host}_last_make_protokoll
[22]	1244
[475]	1245	# make on local host
	1246	else
[22]	1247
[544]	1248	# workaround for lcxt4
	1249	if [[ $remote_host = lcxt4 ]]
	1250	then
	1251	. /opt/modules/default/init/ksh
	1252	fi
	1253
	1254	# first load modules, if given
	1255	if [[ "$modules" != "" ]]
	1256	then
	1257	module load ${modules}
	1258	fi
	1259
	1260
[475]	1261	if [[ $compile_utility_programs = false ]]
	1262	then
[22]	1263
[475]	1264	# DEPOSITORY VERZEICHNIS ERZEUGEN, FALLS NOCH NICHT VORHANDEN
	1265	eval remote_md=$remote_md
	1266	if [[ ! -d $remote_md ]]
[40]	1267	then
[475]	1268	if mkdir $remote_md
[215]	1269	then
[475]	1270	printf "\n\n *** directory for make depository:"
	1271	printf "\n $remote_md"
	1272	printf "\n was created\n"
	1273	else
	1274	printf "\n +++ directory for make depository:"
	1275	printf "\n $remote_md"
	1276	printf "\n cannot be created"
	1277	locat=local_depository_path; exit
[215]	1278	fi
[475]	1279	fi
[215]	1280
[475]	1281	# QUELLTEXT-DATEIEN AUS REPOSITORY INS DEPOSITORY KOPIEREN
	1282	echo " "
	1283	echo " *** updating sources in $remote_md"
	1284	cd $remote_md
	1285	cp $local_source_path/${mainprog}_sources.tar .
	1286	tar xf ${mainprog}_sources.tar
[215]	1287
[475]	1288	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
	1289	echo " "
	1290	echo " *** execute \"make\" on local host"
[1]	1291
[475]	1292	make $make_options PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
[40]	1293
[475]	1294	if [[ $? != 0 ]]
	1295	then
	1296	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
	1297	if [[ $silent = false ]]
[1]	1298	then
[475]	1299	answer=dummy
	1300	printf "\n"
	1301	while [[ "$answer" != c && "$answer" != k ]]
	1302	do
	1303	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
	1304	read answer
	1305	if [[ "$answer" = l ]]
[1]	1306	then
[475]	1307	more ${remote_host}_last_make_protokoll
[1]	1308	fi
[475]	1309	done
	1310	if [[ $answer = k ]]
	1311	then
	1312	locat=user_abort; exit
[1]	1313	fi
	1314	fi
[475]	1315	fi
[1]	1316
	1317
[503]	1318	# TAR NEW VERSION ON LOCAL HOST
[475]	1319	printf "\n *** tar update on local host ..."
	1320	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
[1]	1321
[22]	1322
[475]	1323	# COMPILE THE UTILITY PROGRAMS
	1324	elif [[ $compile_utility_programs = true ]]
	1325	then
	1326	printf "\n\n"
	1327	echo " *** compiling the utility programs ..."
	1328	cd ${local_source_path}/../UTIL
[503]	1329
	1330	# TOUCH FILES IN ORDER TO FORCE COMPILATION FOR EVERY BLOCK
	1331	touch *.f90
	1332	make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
[475]	1333	cd - > /dev/null
[1]	1334	fi
	1335
	1336	fi
[475]	1337
[1]	1338	done
	1339
	1340
	1341	if [[ $host_found = false ]]
	1342	then
	1343	if [[ $host = all ]]
	1344	then
	1345	printf "\n +++ no hosts found in configuration file"
	1346	else
	1347	printf "\n +++ host \"$host\" not found in configuration file"
	1348	fi
	1349	locat=config_file; exit
	1350	fi
	1351
	1352
	1353
[503]	1354	# FINAL WORK
[1]	1355	rm -f hosts_found_in_config_file
	1356

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |