Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 550

Last change on this file since 550 was 544, checked in by maronga, 14 years ago
adjustments for lcxt4
Property svn:keywords set to `Id Rev`
File size: 46.2 KB

Rev	Line
[1]	1	#!/bin/ksh
[503]	2	# mbuild - script for compiling the PALM code and its utility programs
[169]	3	# $Id: mbuild 544 2010-08-17 10:44:58Z maronga $
[1]	4
[503]	5	# Procedure to compile code on local and remote hosts using the
	6	# make-mechanism. The source code must be provided on the local host.
[1]	7
[503]	8	# Last changes:
	9	# 06/05/02 - Siggi - start development
	10	# 12/06/02 - Siggi - first version finished
	11	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) included
	12	# 19/12/02 - Siggi - ibmb included
[1]	13	# 05/02/03 - Siggi - hostname nobela included
	14	# 04/03/03 - Siggi - host nech included
	15	# 06/03/03 - Siggi - make_call_string is echoed without '' to
	16	# file LAST_MAKE_CALL (otherwise error on NEC, because
	17	# '' are part of compiler options
	18	# 16/03/03 - Siggi - Two underscores are placed in front of every define
	19	# string, in case that palm.f90 version contains
	20	# such strings
	21	# 16/04/03 - Siggi - First extensions for linux machines
	22	# 24/06/03 - Siggi - host orkan included
	23	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
	24	# 24/07/03 - Siggi - host maestro admitted
	25	# 06/08/03 - Siggi - host gregale admitted
	26	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
	27	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
	28	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
	29	# (-D$OMP=OMP) in order to avoid problems with
	30	# OMP_NUM_THREADS
	31	# 09/01/04 - Siggi - action above cancelled
	32	# 28/01/04 - Siggi - action above re-cancelled
	33	# 08/03/04 - Siggi - host scirocco admitted
	34	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
	35	# the respective .f90 file is not listed in the makefile
	36	# and deletion is demanded by the user
	37	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
	38	# due to error in ssh installation (otherwise a prompt
	39	# for the password appears)
	40	# 23/07/04 - Siggi - changes due to the new berni configuration
	41	# (federation switch)
	42	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
	43	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
	44	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
	45	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
	46	# 24/04/05 - Siggi - netcdf support on lcmuk
	47	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
	48	# 12/05/05 - Siggi - netcdf support on ibm
	49	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
	50	# 18/05/05 - Siggi - netcdf support on nec
	51	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
	52	# 23/05/05 - Siggi - netcdf support on ibms
	53	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
	54	# 30/06/05 - Siggi - netcdf support on bora
	55	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
	56	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
	57	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
	58	# host gfdl5 (ibmy) admitted
	59	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
	60	# 20/01/06 - Siggi - cpp directive for ibmy
	61	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
	62	# 10/02/06 - Siggi - modifications for scp on decalpha
	63	# 13/04/06 - Siggi - ostria admitted
	64	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
	65	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
	66	# 29/05/05 - Siggi - atmos (lcide) admitted
	67	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
	68	# 24/11/06 - Siggi - breva and levanto admitted
	69	# 07/02/07 - Siggi - adapted for RIAM (neck)
[5]	70	# 10/02/07 - Siggi - all hpmuk-related code removed
[40]	71	# 02/03/07 - Siggi - compilation of utility programs and transfer of
[27]	72	# scripts to remote hosts added (option -u)
[66]	73	# 14/03/07 - Siggi - fimm admitted, revision number added to terminal
	74	# output
[69]	75	# 16/03/07 - Siggi - adjustments (netcdf) for lctit
	76	# adjustments for running under pdksh, local ip-addres
	77	# is not determined any more
[82]	78	# 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
	79	# from configuration file
	80	# host identifier (local_host) is read from config file
[116]	81	# 10/10/07 - Siggi - bugfix: handling of comment lines
[181]	82	# 18/07/08 - Siggi - adapted for lcsgih
	83	# 21/07/08 - Siggi - mainprog (executable) is added to the tar-file
	84	# ({mainprog}_current_version)
[206]	85	# 02/10/08 - Siggi - adapted for lcxt4
[215]	86	# 14/11/08 - Siggi - update mechanism completely revised: source tarfile
	87	# remains in source directory, one depository per block
[266]	88	# (given in the config-file) is created, allways all
	89	# files from the source directory are copied to the
	90	# respective depository, no additional file checks are
	91	# done any more (version 2.1)
[224]	92	# 13/01/09 - Marcus- re-enable compilation more than once on lcmuk (as on
	93	# other machines)
[266]	94	# 21/03/09 - Siggi - -u copies also copies process_dvr_output and
	95	# .dvrserver.config
[305]	96	# 21/04/09 - Siggi - adjustments for new IBM at DKRZ, which is now ibmh
[367]	97	# 25/08/09 - BjornM- adapted for lck
[407]	98	# 01/12/09 - BjornM- re-adjustments for lcxt4
[437]	99	# 01/02/10 - Siggi - adjustments for lcxt5m
[475]	100	# 03/02/10 - Siggi - make options (mopts) to be set by configuration file
	101	# implemented, remoted mode option -r completely
	102	# removed, t3e related parts removed
[492]	103	# 26/02/10 - BjornM- re-adjustments for lcxt4 (new modules)
[493]	104	# 01/03/10 - Siggi - mpilib replaced by modules: explicit module settings
	105	# removed; modules should now be given in the
	106	# configuration file
[503]	107	# 02/03/10 - Siggi - utility programs are created separately for each
	108	# block in the configuration file,
	109	# parallel make for utility programs
[508]	110	# 12/03/10 - Siggi - bugfix: remode_md was given a wrong value
[544]	111	# 16/08/10 - BjornM- bugfix: call of modules on local host, new workaround
	112	# for lcxt4
[1]	113
	114
[508]	115
[503]	116	# VARIABLE DECLARATIONS + DEFAULT VALUES
[22]	117	compile_utility_programs=false
[1]	118	config_file=.mrun.config
[67]	119	fimm=false
[1]	120	host=all
	121	host_found=false
	122	locat=normal
	123	makefile=""
[493]	124	module_calls=""
[1]	125	scirocco=false
	126	silent=false
	127	suf=f90
	128	update=false
[83]	129	working_directory=`pwd`
[1]	130
	131	typeset -i ih ihost=0
	132
[66]	133	typeset -R30 calltime
[1]	134	typeset -L20 column1
	135	typeset -L50 column2
	136	typeset -L70 column3
[215]	137	typeset -L40 version="MBUILD 2.1 Rev$Rev: 544 $"
[1]	138
[503]	139	# ERROR HANDLING
	140	# IN CASE OF EXIT:
[83]	141	trap 'rm -rf $working_directory/tmp_mbuild
[69]	142	if [[ $locat != normal ]]
[1]	143	then
	144	printf "\n\n +++ mbuild killed \n\n"
	145	else
	146	printf "\n\n *** mbuild finished \n\n"
	147	fi' exit
	148
	149
[503]	150	# IN CASE OF TERMINAL-BREAK:
[83]	151	trap 'rm -rf $working_directory/tmp_mbuild
[69]	152	printf "\n\n +++ mbuild killed by \"^C\" \n\n"
[1]	153	exit
	154	' 2
	155
	156
[215]	157	tmp_mbuild=${working_directory}/tmp_mbuild
[1]	158
[503]	159	# READ SHELLSCRIPT-OPTIONS
[475]	160	while getopts :c:h:m:s:u option
[1]	161	do
	162	case $option in
	163	(c) config_file=$OPTARG;;
	164	(h) host=$OPTARG;;
	165	(m) makefile=$OPTARG;;
	166	(s) suf=$OPTARG;;
[22]	167	(u) compile_utility_programs=true;;
[1]	168	(\?) printf "\n +++ unknown option $OPTARG \n";
	169	locat=parameter; exit;;
	170	esac
	171	done
	172
	173
	174
[503]	175	# CHECK, IF CONFIGURATION-FILE EXISTS
[82]	176	if [[ ! -f $config_file ]]
	177	then
	178	printf "\n +++ configuration file: "
	179	printf "\n $config_file"
	180	printf "\n does not exist"
	181	locat=configuration; exit
	182	fi
	183
	184
	185
[503]	186	# DETERMINE THE LOCAL HOST
[1]	187	local_host_real_name=$(hostname)
[69]	188	# local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
	189
[1]	190
[82]	191
[503]	192	# DETERMINE HOST-IDENTIFIER (local_host) FROM THE CONFIG-FILE
[82]	193	line=""
[215]	194	grep "%host_identifier" $config_file > $tmp_mbuild
[82]	195	while read line
	196	do
[116]	197	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
[82]	198	then
	199	HOSTNAME=`echo $line \| cut -d" " -s -f2`
	200	host_identifier=`echo $line \| cut -d" " -s -f3`
[83]	201	if [[ $local_host_real_name = $HOSTNAME ]]
[82]	202	then
	203	local_host=$host_identifier
	204	break
	205	fi
	206	fi
[215]	207	done < $tmp_mbuild
[82]	208
	209	if [[ "$local_host" = "" ]]
	210	then
	211	printf "\n +++ no host identifier found in configuration file \"$config_file\""
	212	printf "\n for local host \"$local_host_real_name\"."
	213	printf "\n Please add line"
	214	printf "\n \"\%host_identifier $local_host_real_name <identifier>\""
	215	printf "\n to the configuration file."
	216	locat=local_host; exit
	217	fi
	218
	219
	220
[1]	221	[[ $local_host_real_name = scirocco ]] && scirocco=true
[67]	222	[[ $local_host_real_name = fimm.bccs.uib.no ]] && fimm=true
[1]	223
	224
	225
	226	if [[ $local_host != ibms ]]
	227	then
	228	config_file=$PWD/$config_file
	229	else
	230	config_file=`pwd`/$config_file
	231	fi
	232
	233
	234
[503]	235	# DETERMINE USER NAME ON LOCAL HOST FROM THE CONFIG-FILE
[1]	236	line=""
[215]	237	grep " $local_host" $config_file \| grep "%remote_username" > $tmp_mbuild
[69]	238	while read line
[1]	239	do
[116]	240	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
[1]	241	then
	242	local_username=`echo $line \| cut -d" " -s -f2`
	243	fi
[215]	244	done < $tmp_mbuild
[1]	245
[82]	246
[1]	247	if [[ "$local_username" = "" ]]
	248	then
	249	printf "\n +++ no user name found in configuration file"
	250	printf "\n for local host \"$local_host\" "
	251	locat=config_file; exit
	252	fi
	253
	254
[503]	255	# DETERMINE LOCAL SOURCE-CODE PATH.
	256	# FIRST CHECK, IF A GLOBAL SOURCE-CODE PATH HAS BEEN DECLARED FOR ALL HOSTS.
	257	# THEREFORE, FIRST SET ALL GLOBAL VARIABLES DECLARED IN THE CONFIG-FILE,
	258	# BECAUSE THEY MAY BE USED AS PART OF THE PATH NAME.
[5]	259	line=""
[215]	260	grep "%" $config_file > $tmp_mbuild
[69]	261	while read line
[5]	262	do
[116]	263	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" && $(echo $line \| cut -c1) != "#" ]]
[1]	264	then
[5]	265	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
	266	value=`echo $line \| cut -d" " -s -f2`
[8]	267	eval export $var=\$value
[1]	268	fi
[215]	269	done < $tmp_mbuild
[1]	270
[503]	271	# NOW CHECK, IF A GLOBAL SOURCE-CODE-PATH HAS BEEN DECLARED
[1]	272	line=""
[215]	273	grep "%source_path" $config_file > $tmp_mbuild
[69]	274	while read line
[1]	275	do
	276	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	277	then
	278	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
	279	then
	280	global_source_path=`echo $line \| cut -d" " -s -f2`
	281	fi
	282	fi
[215]	283	done < $tmp_mbuild
[1]	284
	285	line=""
[215]	286	grep " $local_host" $config_file \| grep "%source_path" > $tmp_mbuild
[69]	287	while read line
[1]	288	do
	289	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	290	then
	291	local_source_path=`echo $line \| cut -d" " -s -f2`
	292	fi
[215]	293	done < $tmp_mbuild
[1]	294
	295	if [[ "$local_source_path" = "" ]]
	296	then
	297	if [[ "$global_source_path" != "" ]]
	298	then
	299	local_source_path=$global_source_path
	300	else
	301	printf "\n +++ no source path found in configuration file"
	302	printf "\n for local host \"$local_host\" "
	303	printf "\n please set \"\%source_path\" in configuration file"
	304	locat=config_file; exit
	305	fi
	306	fi
	307	eval local_source_path=$local_source_path
[8]	308	eval local_source_path=$local_source_path
[1]	309
	310
[215]	311
[503]	312	# DETERMINE GLOBAL DEPOSITORY-PATH
[1]	313	line=""
[215]	314	grep "%depository_path" $config_file > $tmp_mbuild
[69]	315	while read line
[1]	316	do
	317	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	318	then
	319	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
	320	then
	321	global_depository_path=`echo $line \| cut -d" " -s -f2`
	322	fi
	323	fi
[215]	324	done < $tmp_mbuild
[1]	325
	326
	327
[503]	328	# CHECK, IF A MAIN PROGRAM HAS BEEN DEFINED IN THE CONFIG-FILE
[5]	329	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
	330	then
	331	printf "\n +++ no main program or more than one main program defined"
	332	printf "\n in configuration file"
	333	locat=configuration; exit
	334	else
	335	line=`grep "%mainprog" $config_file`
	336	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
	337	then
	338	printf "\n +++ no main program defined in configuration file"
	339	locat=configuration; exit
	340	fi
	341	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
	342	fi
	343
	344
	345
[503]	346	# CHECK IF MAKEFILE EXITS
[1]	347	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
	348	if [[ ! -f $makefile ]]
	349	then
	350	printf "\n +++ makefile: "
	351	printf "\n $makefile"
	352	printf "\n does not exist"
	353	locat=makefile; exit
	354	fi
	355
	356
[503]	357	# HEADER-OUTPUT (PART1: MESSAGES CONCERNING THE LOCAL HOST)
[1]	358	calltime=$(date)
	359	printf "\n"
	360	printf "#------------------------------------------------------------------------# \n"
	361	printf "\| $version$calltime \| \n"
	362	printf "\| \| \n"
	363	column1="called on:"; column2=$local_host_real_name
	364	printf "\| $column1$column2 \| \n"
	365	column1="local username:"; column2=$local_username
	366	printf "\| $column1$column2 \| \n"
	367	column1="local IP-addres:"; column2=$local_addres
	368	printf "\| $column1$column2 \| \n"
	369	column1="config file:"; column2=$config_file
	370	printf "\| $column1$column2 \| \n"
	371	column1="makefile:"; column2=$makefile
	372	printf "\| $column1$column2 \| \n"
	373	column1="local source path:"; column2=$local_source_path
	374	printf "\| $column1$column2 \| \n"
	375	printf "#------------------------------------------------------------------------# \n"
	376
	377	# printf "\| \| \n"
	378
	379
[40]	380	if [[ $compile_utility_programs = false ]]
	381	then
[1]	382
[503]	383	# IN ANY CASE, GIVE ALL FILES WRITE-PERMIT, IN ORDER TO AVOID PROBLEMS
	384	# WITH OVERWRITING FILES ON THE REMOTE HOST
[215]	385	cd $local_source_path
	386	printf "\n\n *** tar of makefile and source files in $local_source_path"
[40]	387	tar -cf ${mainprog}_sources.tar Makefile *.$suf
	388	printf "\n"
[1]	389
[40]	390	fi
[1]	391
	392
[40]	393
[503]	394	# GET CONFIRMATION TO CONTINUE
[1]	395	if [[ $host = all ]]
	396	then
	397	printf "\n *** updates will be made for ALL hosts found in"
	398	printf "\n the configuration file"
	399	else
	400	printf "\n *** update will be made for host \"$host\" "
	401	fi
	402
	403	if [[ $silent = false ]]
	404	then
	405	answer=dummy
	406	printf "\n\n"
	407	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
	408	do
	409	printf " >>> continue (y/n) ? "
	410	read answer
	411	done
	412	if [[ $answer = n \|\| $answer = N ]]
	413	then
	414	locat=user_abort; exit
	415	fi
	416	fi
	417
	418
	419
	420
	421	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
	422	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
	423	printf "\n *** scanning configuration file for host(s) ..."
	424
[215]	425	grep %fopts $config_file > $tmp_mbuild
[69]	426	while read line
[1]	427	do
	428	# KOMMENTARZEILEN UEBERSPRINGEN
	429	[[ $(echo $line \| cut -c1) = "#" ]] && continue
	430	(( ihost = ihost + 1 ))
	431	hostline[$ihost]="$line"
[215]	432	done < $tmp_mbuild
[1]	433
	434
	435	while (( ih < ihost ))
	436	do
	437
	438	(( ih = ih + 1 ))
	439
	440	# REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
	441	# NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
	442	# SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
	443	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
	444	remote_host=`echo $remote_host_string \| cut -d" " -f1`
	445	if [[ $host != all ]]
	446	then
	447	[[ $remote_host != $host ]] && continue
	448	fi
	449	host_found=true
	450	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
	451	if [[ $condition1 = $remote_host ]]
	452	then
	453	condition1=""
	454	else
	455	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
	456	fi
	457
[493]	458	modules=""
[82]	459	netcdf_inc=""
	460	netcdf_lib=""
[1]	461
	462	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
	463	case $remote_host in
[116]	464	(lcmuk) remote_addres=130.75.105.2;;
[181]	465	(lcsgib) remote_addres=130.73.232.102;;
[346]	466	(lcsgih) remote_addres=130.75.4.102;;
[367]	467	(lck) remote_addres=165.132.26.61;;
[83]	468	(lctit) remote_addres=172.17.75.161;;
[206]	469	(lcxt4) remote_addres=129.177.20.113;;
[437]	470	(lcxt5m) remote_addres=193.166.211.144;;
[83]	471	(decalpha) remote_addres=165.132.26.56;;
[305]	472	(ibmh) remote_addres=136.172.40.15;;
[83]	473	(ibms) remote_addres=150.183.5.101;;
	474	(ibmy) remote_addres=165.132.26.58;;
	475	(nech) remote_addres=136.172.44.192;;
	476	(neck) remote_addres=133.5.178.11;;
	477	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
	478	(*) if [[ $local_host != $remote_host ]]
[1]	479	then
[83]	480	printf "\n +++ remote host \"$remote_host\" unknown";
[503]	481	printf "\n please inform PALM group support!"
[1]	482	fi;;
	483	esac
	484
	485
	486	# REMOTE-USERNAMEN ERMITTELN
	487	line=""
[116]	488	found=false
[215]	489	grep "$remote_host_string" $config_file \| grep "%remote_username" > $tmp_mbuild
[69]	490	while read line1
[1]	491	do
[116]	492
[1]	493	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	494	then
	495	line="$line1"
	496	fi
[116]	497
	498	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	499	then
	500	remote_username=`echo $line \| cut -d" " -s -f2`
	501	found=true
	502	fi
	503
[215]	504	done < $tmp_mbuild
[1]	505
[116]	506	if [[ $found = false ]]
[1]	507	then
	508	printf "\n +++ no remote username found in configuration file"
	509	printf "\n for \"$remote_host_string\" "
	510	locat=config_file; exit
	511	fi
	512
	513
	514	# REMOTE-QUELLTEXTPFAD ERMITTELN
	515	line=""
[54]	516	remote_source_path=""
[215]	517	grep "$remote_host_string" $config_file \| grep "%source_path" > $tmp_mbuild
[69]	518	while read line1
[1]	519	do
[116]	520
[1]	521	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	522	then
	523	line="$line1"
	524	fi
[116]	525
	526	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	527	then
	528	remote_source_path=`echo $line \| cut -d" " -s -f2`
	529	fi
	530
[215]	531	done < $tmp_mbuild
[1]	532
	533	if [[ "$remote_source_path" = "" ]]
	534	then
	535	if [[ "$global_source_path" != "" ]]
	536	then
	537	remote_source_path=$global_source_path
	538	else
	539	printf "\n +++ no source path found in configuration file"
	540	printf "\n for \"$remote_host_string\" "
	541	locat=config_file; exit
	542	fi
	543	fi
	544
[22]	545	remote_ud=${remote_source_path}/../UTIL
[24]	546	remote_ud=$(eval echo $remote_ud)
[1]	547
[54]	548
[1]	549	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
[54]	550	remote_md=""
[1]	551	line=""
[215]	552	grep "$remote_host_string" $config_file \| grep "%depository_path" > $tmp_mbuild
[69]	553	while read line1
[1]	554	do
[116]	555
[1]	556	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	557	then
	558	line="$line1"
	559	fi
[116]	560
	561	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	562	then
	563	remote_md=`echo $line \| cut -d" " -s -f2`
	564	fi
	565
[215]	566	done < $tmp_mbuild
[1]	567
	568	if [[ "$remote_md" = "" ]]
	569	then
	570	if [[ "$global_depository_path" != "" ]]
	571	then
	572	remote_md=$global_depository_path
	573	else
	574	printf "\n +++ no depository path found in configuration file"
	575	printf "\n for \"$remote_host_string\" "
	576	printf "\n please set \"\%depository_path\" in configuration file"
	577	locat=config_file; exit
	578	fi
	579	fi
	580
[8]	581	remote_md=$(eval echo $remote_md)
[503]	582	block=""
	583	[[ "$condition1" != "" ]] && block=_$condition1
	584	[[ "$condition2" != "" ]] && block=${block}_$condition2
[508]	585	remote_md=${remote_md}$block
[1]	586
[8]	587
[1]	588	# COMPILERNAMEN ERMITTELN
	589	line=""
[116]	590	found=false
[215]	591	grep "$remote_host_string" $config_file \| grep "%compiler_name " > $tmp_mbuild
[69]	592	while read line1
[1]	593	do
[116]	594
[1]	595	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	596	then
	597	line="$line1"
	598	fi
[116]	599
	600	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	601	then
	602	compiler_name=`echo $line \| cut -d" " -s -f2`
	603	found=true
	604	fi
	605
[215]	606	done < $tmp_mbuild
[1]	607
[116]	608	if [[ $found = false ]]
[1]	609	then
	610	printf "\n +++ no compiler name found in configuration file"
	611	printf "\n for \"$remote_host_string\" "
	612	locat=config_file; exit
	613	fi
	614
	615
[27]	616	# BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
	617	# SERIELLER COMPILERNAME ERMITTELT WERDEN
	618	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
	619	then
	620	line=""
[116]	621	found=false
[215]	622	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" > $tmp_mbuild
[69]	623	while read line1
[27]	624	do
[116]	625
[27]	626	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	627	then
	628	line="$line1"
	629	fi
[116]	630
	631	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	632	then
	633	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
	634	found=true
	635	fi
	636
[215]	637	done < $tmp_mbuild
[1]	638
[116]	639	if [[ $found = false ]]
[27]	640	then
[28]	641	printf "\n +++ no serial compiler name found in configuration file"
[27]	642	printf "\n for \"$remote_host_string\" "
	643	locat=config_file; exit
	644	fi
	645	else
	646	compiler_name_ser=$compiler_name
	647	fi
	648
	649
	650
[82]	651	# PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
	652	line=""
[116]	653	found=false
[215]	654	grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
[82]	655	while read line1
	656	do
[116]	657
[82]	658	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	659	then
	660	line="$line1"
	661	fi
[116]	662
	663	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	664	then
	665	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	666	cpp_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	667	found=true
	668	fi
	669
[215]	670	done < $tmp_mbuild
[116]	671
	672	if [[ $found = false ]]
[82]	673	then
	674	printf "\n +++ no preprocessor options found in configuration file"
	675	printf "\n for \"$remote_host_string\" "
	676	locat=config_file; exit
	677	fi
	678
[116]	679
[82]	680	# RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
	681	for string in $remote_host_string
	682	do
	683	if [[ $(echo $remote_host \| cut -c1-2) = lc && $(echo $string \| cut -c1-2) = lc ]]
	684	then
	685	cpp_options="$cpp_options -D__lc "
[83]	686	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $(echo $string \| cut -c1-3) = ibm ]]
	687	then
	688	cpp_options="${cpp_options},-D__ibm"
	689	elif [[ $(echo $remote_host \| cut -c1-3) = nec && $(echo $string \| cut -c1-3) = nec ]]
	690	then
	691	cpp_options="${cpp_options} -D__nec"
[82]	692	else
[83]	693	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
	694	then
	695	cpp_options="${cpp_options},-D__$string"
	696	else
	697	cpp_options="$cpp_options -D__$string "
	698	fi
[82]	699	fi
	700	done
	701
	702
	703
	704	# NETCDF-OPTIONEN ERMITTELN
	705	line=""
[215]	706	grep "$remote_host_string" $config_file \| grep "%netcdf_inc" > $tmp_mbuild
[82]	707	while read line1
	708	do
[116]	709
[82]	710	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	711	then
	712	line="$line1"
	713	fi
[116]	714
	715	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	716	then
	717	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	718	netcdf_inc=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	719	fi
	720
[215]	721	done < $tmp_mbuild
[82]	722
	723	line=""
[215]	724	grep "$remote_host_string" $config_file \| grep "%netcdf_lib" > $tmp_mbuild
[82]	725	while read line1
	726	do
[116]	727
[82]	728	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	729	then
	730	line="$line1"
	731	fi
[116]	732
	733	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	734	then
	735	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	736	netcdf_lib=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	737	fi
	738
[215]	739	done < $tmp_mbuild
[82]	740
	741
	742
[475]	743	# get make options
	744	line=""
	745	found=false
	746	grep "$remote_host_string" $config_file \| grep "%mopts" > $tmp_mbuild
	747	while read line1
	748	do
	749
	750	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	751	then
	752	line="$line1"
	753	fi
	754
	755	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	756	then
	757	# remove colons from directive string
	758	make_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	759
	760	fi
	761
	762	done < $tmp_mbuild
	763
	764
	765
[1]	766	# COMPILEROPTIONEN ERMITTELN
	767	line=""
[116]	768	found=false
[215]	769	grep "$remote_host_string" $config_file \| grep "%fopts" > $tmp_mbuild
[69]	770	while read line1
[1]	771	do
[116]	772
[1]	773	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	774	then
	775	line="$line1"
	776	fi
[116]	777
	778	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	779	then
	780	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	781	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	782	found=true
	783
	784	# NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
	785	compiler_options="$compiler_options $netcdf_inc"
	786	fi
	787
[215]	788	done < $tmp_mbuild
[116]	789
	790	if [[ $found = false ]]
[1]	791	then
	792	printf "\n +++ no compiler options found in configuration file"
	793	printf "\n for \"$remote_host_string\" "
	794	locat=config_file; exit
	795	fi
[82]	796
[1]	797
	798
[503]	799	# get modules to be loaded
[221]	800	line=""
[493]	801	grep "$remote_host_string" $config_file \| grep "%modules" > $tmp_mbuild
[221]	802	while read line1
	803	do
	804
	805	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	806	then
	807	line="$line1"
	808	fi
	809
	810	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	811	then
	812	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
[493]	813	modules=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
[221]	814	fi
	815
	816	done < $tmp_mbuild
	817
	818
	819
	820
[1]	821	# LADER-OPTIONEN ERMITTELN
	822	line=""
[116]	823	found=false
[215]	824	grep "$remote_host_string" $config_file \| grep "%lopts" > $tmp_mbuild
[69]	825	while read line1
[1]	826	do
[116]	827
[1]	828	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	829	then
	830	line="$line1"
	831	fi
[116]	832
	833	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	834	then
	835	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	836	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	837	found=true
	838
	839	# NETCDF-LIBRARY HINZUFUEGEN
	840	loader_options="$loader_options $netcdf_lib"
	841	fi
	842
[215]	843	done < $tmp_mbuild
[1]	844
[116]	845	if [[ $found = false ]]
[1]	846	then
	847	printf "\n +++ no loader options found in configuration file"
	848	printf "\n for \"$remote_host_string\" "
	849	locat=config_file; exit
	850	fi
[82]	851
[1]	852
	853	printf "\n\n#------------------------------------------------------------------------# \n"
	854	if [[ $remote_host = $local_host ]]
	855	then
	856	column1="remote_host:"; column2="$remote_host (= local host!)"
	857	else
	858	column1="remote_host:"; column2=$remote_host
	859	fi
	860	printf "\| $column1$column2 \| \n"
	861	printf "\| \| \n"
	862	column1="conditions:"; column2="$condition1 $condition2"
	863	printf "\| $column1$column2 \| \n"
	864	column1="make depository:"; column2=$remote_md
	865	printf "\| $column1$column2 \| \n"
[215]	866	line=$(echo "$remote_md" \| cut -c51-)
	867	while [[ "$line" != "" ]]
	868	do
	869	column1=""
	870	column2=$line
	871	printf "\| $column1$column2 \| \n"
	872	line=$(echo "$line" \| cut -c51-)
	873	done
[25]	874	if [[ $compile_utility_programs = true ]]
	875	then
	876	column1="utility directory:"; column2=$remote_ud
	877	printf "\| $column1$column2 \| \n"
	878	fi
[1]	879	column1="username:"; column2=$remote_username
	880	printf "\| $column1$column2 \| \n"
	881	column1="addres:"; column2=$remote_addres
	882	printf "\| $column1$column2 \| \n"
	883	column1="compiler:"; column2=$compiler_name
	884	printf "\| $column1$column2 \| \n"
[28]	885	if [[ $compile_utility_programs = true ]]
	886	then
	887	column1="serial compiler:"; column2=$compiler_name_ser
	888	printf "\| $column1$column2 \| \n"
	889	fi
[475]	890	if [[ "$make_options" != "" ]]
	891	then
	892	column1="make options:"; column2=$make_options
	893	printf "\| $column1$column2 \| \n"
	894	fi
[1]	895	column1="cpp options:"; column2=$cpp_options
	896	printf "\| $column1$column2 \| \n"
	897	line=$(echo "$cpp_options" \| cut -c51-)
	898	while [[ "$line" != "" ]]
	899	do
	900	column1=""
	901	column2=$line
	902	printf "\| $column1$column2 \| \n"
	903	line=$(echo "$line" \| cut -c51-)
	904	done
	905	column1="compiler options:"; column2=$compiler_options
	906	printf "\| $column1$column2 \| \n"
	907	line=$(echo "$compiler_options" \| cut -c51-)
	908	while [[ "$line" != "" ]]
	909	do
	910	column1=""
	911	column2=$line
	912	printf "\| $column1$column2 \| \n"
	913	line=$(echo "$line" \| cut -c51-)
	914	done
	915	column1="loader options:"; column2=$loader_options
	916	printf "\| $column1$column2 \| \n"
	917	line=$(echo "$loader_options" \| cut -c51-)
	918	while [[ "$line" != "" ]]
	919	do
	920	column1=""
	921	column2=$line
	922	printf "\| $column1$column2 \| \n"
	923	line=$(echo "$line" \| cut -c51-)
	924	done
[493]	925	if [[ $modules != "" ]]
	926	then
	927	column1="modules to be load:"; column2=$modules
	928	printf "\| $column1$column2 \| \n"
	929	line=$(echo "$modules" \| cut -c51-)
	930	while [[ "$line" != "" ]]
	931	do
	932	column1=""
	933	column2=$line
	934	printf "\| $column1$column2 \| \n"
	935	line=$(echo "$line" \| cut -c51-)
	936	done
	937	fi
[1]	938	printf "#------------------------------------------------------------------------# \n"
	939
	940	if [[ $silent = false ]]
	941	then
	942	answer=dummy
	943	printf "\n\n"
	944	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
	945	do
	946	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
	947	read answer
	948	done
	949	if [[ $answer = a \|\| $answer = A ]]
	950	then
	951	locat=user_abort; exit
	952	fi
	953	if [[ $answer = c \|\| $answer = C ]]
	954	then
[503]	955	silent=true
[1]	956	fi
	957	if [[ $answer = s \|\| $answer = S ]]
	958	then
	959	continue
	960	fi
	961	fi
	962
	963
[475]	964	# make on remote host
	965	if [[ $remote_host != $local_host ]]
[1]	966	then
	967
[475]	968	if [[ $compile_utility_programs = false ]]
[1]	969	then
	970
[475]	971	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	972	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
	973	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
	974	if [[ $remote_host != lctit ]]
	975	then
	976	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
	977	else
	978	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	979	# MIT SSH, DESHALB AUFRUF PER PIPE
	980	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
	981	fi
	982	if [[ $local_host = decalpha ]]
	983	then
	984	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
	985	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	986	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	987	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
	988	/bin/scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
	989	else
	990	scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
	991	fi
[1]	992
	993
	994
[475]	995	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
	996	echo " *** untar previous update on remote host, if existing"
	997	if [[ $remote_host != lctit ]]
	998	then
	999	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
	1000	else
	1001	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	1002	# MIT SSH, DESHALB AUFRUF PER PIPE
	1003	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
	1004	fi
[1]	1005
	1006
[475]	1007	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
	1008	echo " *** untar actual sources on remote host"
	1009	if [[ $remote_host != lctit ]]
	1010	then
	1011	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
	1012	else
	1013	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	1014	# MIT SSH, DESHALB AUFRUF PER PIPE
	1015	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
	1016	fi
[1]	1017
	1018
[475]	1019	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1020	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
	1021	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
	1022	# Z.B. DIE PFADE ZUM COMPILER)
	1023	echo " *** execute \"make\" on remote host"
[1]	1024
[493]	1025
	1026	# generate make call with make options
[475]	1027	if [[ $remote_host = nech ]]
	1028	then
	1029	make_call_string="sxmake $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1030	else
	1031	make_call_string="make $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1032	fi
[1]	1033
[493]	1034	# generate command to load modules, if modules are given
	1035	if [[ "$modules" != "" ]]
	1036	then
	1037	module_calls="module load ${modules};"
[503]	1038	else
	1039	module_calls=""
[493]	1040	fi
	1041
[475]	1042	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
	1043	then
[1]	1044
[493]	1045	ssh ${remote_username}@${remote_addres} "$module_calls cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1046
[475]	1047	elif [[ $remote_host = ibmh ]]
	1048	then
[1]	1049
[493]	1050	print "$module_calls export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1051
[475]	1052	elif [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
	1053	then
[1]	1054
[493]	1055	print ". /usr/share/modules/init/bash; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1056
[475]	1057	elif [[ $remote_host = lctit ]]
	1058	then
[1]	1059
[475]	1060	echo " " > ${remote_host}_last_make_protokoll
	1061	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
	1062	do
	1063	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1064	done
[1]	1065
[475]	1066	elif [[ $remote_host = lcxt4 ]]
[1]	1067	then
	1068
[493]	1069	print ". /opt/modules/default/init/ksh; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1070
[475]	1071	else
[1]	1072
[493]	1073	print "cd $module_calls ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1074
[475]	1075	fi
[1]	1076
[475]	1077	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
	1078	then
	1079	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
	1080	if [[ $silent = false ]]
[40]	1081	then
[475]	1082	answer=dummy
	1083	printf "\n"
	1084	while [[ "$answer" != c && "$answer" != k ]]
[40]	1085	do
[475]	1086	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
	1087	read answer
	1088	if [[ "$answer" = l ]]
	1089	then
	1090	more ${remote_host}_last_make_protokoll
	1091	fi
[40]	1092	done
[475]	1093	if [[ $answer = k ]]
[40]	1094	then
[475]	1095	locat=user_abort; exit
[1]	1096	fi
	1097	fi
[475]	1098	fi
[1]	1099
	1100
	1101
[475]	1102	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
	1103	printf "\n *** tar update on remote host ..."
	1104	if [[ $remote_host != lctit ]]
	1105	then
	1106	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod"
	1107	else
	1108	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	1109	# MIT SSH, DESHALB AUFRUF PER PIPE
	1110	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
	1111	fi
[1]	1112
	1113
[475]	1114	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
	1115	# printf "\n *** \"make clean\" on remote host ..."
	1116	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
	1117	# printf "\n"
[1]	1118
	1119
[25]	1120
	1121
[475]	1122	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
	1123	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	1124	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
	1125	elif [[ $compile_utility_programs = true ]]
	1126	then
	1127
	1128	printf "\n\n"
	1129	echo " *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
	1130	cd ${local_source_path}/../SCRIPTS
	1131
	1132	if [[ $remote_host != lctit ]]
[22]	1133	then
[475]	1134	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
	1135	else
[503]	1136	# TIT ERLAUBT NUR DIE AUSFUEHRUNG GANZ BESTIMMTER KOMMANDOS
[475]	1137	# MIT SSH, DESHALB AUFRUF PER PIPE
	1138	print "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_addres} 2>&1
	1139	fi
[22]	1140
[475]	1141	# KOPIEREN DER SCRIPTE
	1142	if [[ $local_host = decalpha ]]
	1143	then
[503]	1144	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTAENDIGEN PFADES
[475]	1145	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1146	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1147	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
	1148	/bin/scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
	1149	else
	1150	scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
	1151	fi
[22]	1152
[475]	1153	cd - > /dev/null
	1154	cd ${local_source_path}/../UTIL
[22]	1155
[27]	1156
[475]	1157	# KOPIEREN DER UTILITY-PROGRAMME
	1158	if [[ $local_host = decalpha ]]
	1159	then
	1160	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
	1161	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1162	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1163	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
	1164	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
	1165	else
	1166	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
	1167	fi
[27]	1168
	1169
[22]	1170
[475]	1171	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1172	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
	1173	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
	1174	# Z.B. DIE PFADE ZUM COMPILER)
	1175	echo " *** execute \"make\" on remote host"
[22]	1176
[475]	1177	if [[ $remote_host = nech ]]
	1178	then
[503]	1179	make_call_string="sxmake $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
[475]	1180	else
[503]	1181	make_call_string="make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
[475]	1182	fi
[22]	1183
[493]	1184	# generate command to load modules, if modules are given
	1185	if [[ "$modules" != "" ]]
	1186	then
	1187	module_calls="module load ${modules};"
[503]	1188	else
	1189	module_calls=""
[493]	1190	fi
	1191
[475]	1192	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
	1193	then
[22]	1194
[493]	1195	ssh ${remote_username}@${remote_addres} "$module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
[22]	1196
[475]	1197	elif [[ $remote_host = ibmh ]]
	1198	then
[22]	1199
[493]	1200	print "$module_calls export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres}
[22]	1201
[475]	1202	elif [[ $remote_host = lctit ]]
	1203	then
[22]	1204
[475]	1205	echo " " > ${remote_host}_last_make_protokoll
	1206	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
	1207	do
[493]	1208	print "$module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[475]	1209	done
[22]	1210
[475]	1211	elif [[ $remote_host = lcxt4 ]]
	1212	then
[22]	1213
[493]	1214	print ". /opt/modules/default/init/ksh; $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[22]	1215
[475]	1216	else
[407]	1217
[493]	1218	print "$module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[407]	1219
[475]	1220	fi
[22]	1221
[475]	1222	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
[22]	1223
[475]	1224	rm -rf ${remote_host}_last_make_protokoll
[22]	1225
[475]	1226	# make on local host
	1227	else
[22]	1228
[544]	1229	# workaround for lcxt4
	1230	if [[ $remote_host = lcxt4 ]]
	1231	then
	1232	. /opt/modules/default/init/ksh
	1233	fi
	1234
	1235	# first load modules, if given
	1236	if [[ "$modules" != "" ]]
	1237	then
	1238	module load ${modules}
	1239	fi
	1240
	1241
[475]	1242	if [[ $compile_utility_programs = false ]]
	1243	then
[22]	1244
[475]	1245	# DEPOSITORY VERZEICHNIS ERZEUGEN, FALLS NOCH NICHT VORHANDEN
	1246	eval remote_md=$remote_md
	1247	if [[ ! -d $remote_md ]]
[40]	1248	then
[475]	1249	if mkdir $remote_md
[215]	1250	then
[475]	1251	printf "\n\n *** directory for make depository:"
	1252	printf "\n $remote_md"
	1253	printf "\n was created\n"
	1254	else
	1255	printf "\n +++ directory for make depository:"
	1256	printf "\n $remote_md"
	1257	printf "\n cannot be created"
	1258	locat=local_depository_path; exit
[215]	1259	fi
[475]	1260	fi
[215]	1261
[475]	1262	# QUELLTEXT-DATEIEN AUS REPOSITORY INS DEPOSITORY KOPIEREN
	1263	echo " "
	1264	echo " *** updating sources in $remote_md"
	1265	cd $remote_md
	1266	cp $local_source_path/${mainprog}_sources.tar .
	1267	tar xf ${mainprog}_sources.tar
[215]	1268
[475]	1269	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
	1270	echo " "
	1271	echo " *** execute \"make\" on local host"
[1]	1272
[475]	1273	make $make_options PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
[40]	1274
[475]	1275	if [[ $? != 0 ]]
	1276	then
	1277	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
	1278	if [[ $silent = false ]]
[1]	1279	then
[475]	1280	answer=dummy
	1281	printf "\n"
	1282	while [[ "$answer" != c && "$answer" != k ]]
	1283	do
	1284	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
	1285	read answer
	1286	if [[ "$answer" = l ]]
[1]	1287	then
[475]	1288	more ${remote_host}_last_make_protokoll
[1]	1289	fi
[475]	1290	done
	1291	if [[ $answer = k ]]
	1292	then
	1293	locat=user_abort; exit
[1]	1294	fi
	1295	fi
[475]	1296	fi
[1]	1297
	1298
[503]	1299	# TAR NEW VERSION ON LOCAL HOST
[475]	1300	printf "\n *** tar update on local host ..."
	1301	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
[1]	1302
[22]	1303
[475]	1304	# COMPILE THE UTILITY PROGRAMS
	1305	elif [[ $compile_utility_programs = true ]]
	1306	then
	1307	printf "\n\n"
	1308	echo " *** compiling the utility programs ..."
	1309	cd ${local_source_path}/../UTIL
[503]	1310
	1311	# TOUCH FILES IN ORDER TO FORCE COMPILATION FOR EVERY BLOCK
	1312	touch *.f90
	1313	make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
[475]	1314	cd - > /dev/null
[1]	1315	fi
	1316
	1317	fi
[475]	1318
[1]	1319	done
	1320
	1321
	1322	if [[ $host_found = false ]]
	1323	then
	1324	if [[ $host = all ]]
	1325	then
	1326	printf "\n +++ no hosts found in configuration file"
	1327	else
	1328	printf "\n +++ host \"$host\" not found in configuration file"
	1329	fi
	1330	locat=config_file; exit
	1331	fi
	1332
	1333
	1334
[503]	1335	# FINAL WORK
[1]	1336	rm -f hosts_found_in_config_file
	1337

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |