Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 508

Last change on this file since 508 was 508, checked in by raasch, 14 years ago
bugfix in mbuild: remode_md was given a wrong value
Property svn:keywords set to `Id Rev`
File size: 45.9 KB

Rev	Line
[1]	1	#!/bin/ksh
[503]	2	# mbuild - script for compiling the PALM code and its utility programs
[169]	3	# $Id: mbuild 508 2010-03-12 00:28:28Z raasch $
[1]	4
[503]	5	# Procedure to compile code on local and remote hosts using the
	6	# make-mechanism. The source code must be provided on the local host.
[1]	7
[503]	8	# Last changes:
	9	# 06/05/02 - Siggi - start development
	10	# 12/06/02 - Siggi - first version finished
	11	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) included
	12	# 19/12/02 - Siggi - ibmb included
[1]	13	# 05/02/03 - Siggi - hostname nobela included
	14	# 04/03/03 - Siggi - host nech included
	15	# 06/03/03 - Siggi - make_call_string is echoed without '' to
	16	# file LAST_MAKE_CALL (otherwise error on NEC, because
	17	# '' are part of compiler options
	18	# 16/03/03 - Siggi - Two underscores are placed in front of every define
	19	# string, in case that palm.f90 version contains
	20	# such strings
	21	# 16/04/03 - Siggi - First extensions for linux machines
	22	# 24/06/03 - Siggi - host orkan included
	23	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
	24	# 24/07/03 - Siggi - host maestro admitted
	25	# 06/08/03 - Siggi - host gregale admitted
	26	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
	27	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
	28	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
	29	# (-D$OMP=OMP) in order to avoid problems with
	30	# OMP_NUM_THREADS
	31	# 09/01/04 - Siggi - action above cancelled
	32	# 28/01/04 - Siggi - action above re-cancelled
	33	# 08/03/04 - Siggi - host scirocco admitted
	34	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
	35	# the respective .f90 file is not listed in the makefile
	36	# and deletion is demanded by the user
	37	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
	38	# due to error in ssh installation (otherwise a prompt
	39	# for the password appears)
	40	# 23/07/04 - Siggi - changes due to the new berni configuration
	41	# (federation switch)
	42	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
	43	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
	44	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
	45	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
	46	# 24/04/05 - Siggi - netcdf support on lcmuk
	47	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
	48	# 12/05/05 - Siggi - netcdf support on ibm
	49	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
	50	# 18/05/05 - Siggi - netcdf support on nec
	51	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
	52	# 23/05/05 - Siggi - netcdf support on ibms
	53	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
	54	# 30/06/05 - Siggi - netcdf support on bora
	55	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
	56	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
	57	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
	58	# host gfdl5 (ibmy) admitted
	59	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
	60	# 20/01/06 - Siggi - cpp directive for ibmy
	61	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
	62	# 10/02/06 - Siggi - modifications for scp on decalpha
	63	# 13/04/06 - Siggi - ostria admitted
	64	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
	65	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
	66	# 29/05/05 - Siggi - atmos (lcide) admitted
	67	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
	68	# 24/11/06 - Siggi - breva and levanto admitted
	69	# 07/02/07 - Siggi - adapted for RIAM (neck)
[5]	70	# 10/02/07 - Siggi - all hpmuk-related code removed
[40]	71	# 02/03/07 - Siggi - compilation of utility programs and transfer of
[27]	72	# scripts to remote hosts added (option -u)
[66]	73	# 14/03/07 - Siggi - fimm admitted, revision number added to terminal
	74	# output
[69]	75	# 16/03/07 - Siggi - adjustments (netcdf) for lctit
	76	# adjustments for running under pdksh, local ip-addres
	77	# is not determined any more
[82]	78	# 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
	79	# from configuration file
	80	# host identifier (local_host) is read from config file
[116]	81	# 10/10/07 - Siggi - bugfix: handling of comment lines
[181]	82	# 18/07/08 - Siggi - adapted for lcsgih
	83	# 21/07/08 - Siggi - mainprog (executable) is added to the tar-file
	84	# ({mainprog}_current_version)
[206]	85	# 02/10/08 - Siggi - adapted for lcxt4
[215]	86	# 14/11/08 - Siggi - update mechanism completely revised: source tarfile
	87	# remains in source directory, one depository per block
[266]	88	# (given in the config-file) is created, allways all
	89	# files from the source directory are copied to the
	90	# respective depository, no additional file checks are
	91	# done any more (version 2.1)
[224]	92	# 13/01/09 - Marcus- re-enable compilation more than once on lcmuk (as on
	93	# other machines)
[266]	94	# 21/03/09 - Siggi - -u copies also copies process_dvr_output and
	95	# .dvrserver.config
[305]	96	# 21/04/09 - Siggi - adjustments for new IBM at DKRZ, which is now ibmh
[367]	97	# 25/08/09 - BjornM- adapted for lck
[407]	98	# 01/12/09 - BjornM- re-adjustments for lcxt4
[437]	99	# 01/02/10 - Siggi - adjustments for lcxt5m
[475]	100	# 03/02/10 - Siggi - make options (mopts) to be set by configuration file
	101	# implemented, remoted mode option -r completely
	102	# removed, t3e related parts removed
[492]	103	# 26/02/10 - BjornM- re-adjustments for lcxt4 (new modules)
[493]	104	# 01/03/10 - Siggi - mpilib replaced by modules: explicit module settings
	105	# removed; modules should now be given in the
	106	# configuration file
[503]	107	# 02/03/10 - Siggi - utility programs are created separately for each
	108	# block in the configuration file,
	109	# parallel make for utility programs
[508]	110	# 12/03/10 - Siggi - bugfix: remode_md was given a wrong value
[1]	111
	112
[508]	113
[503]	114	# VARIABLE DECLARATIONS + DEFAULT VALUES
[22]	115	compile_utility_programs=false
[1]	116	config_file=.mrun.config
[67]	117	fimm=false
[1]	118	host=all
	119	host_found=false
	120	locat=normal
	121	makefile=""
[493]	122	module_calls=""
[1]	123	scirocco=false
	124	silent=false
	125	suf=f90
	126	update=false
[83]	127	working_directory=`pwd`
[1]	128
	129	typeset -i ih ihost=0
	130
[66]	131	typeset -R30 calltime
[1]	132	typeset -L20 column1
	133	typeset -L50 column2
	134	typeset -L70 column3
[215]	135	typeset -L40 version="MBUILD 2.1 Rev$Rev: 508 $"
[1]	136
[503]	137	# ERROR HANDLING
	138	# IN CASE OF EXIT:
[83]	139	trap 'rm -rf $working_directory/tmp_mbuild
[69]	140	if [[ $locat != normal ]]
[1]	141	then
	142	printf "\n\n +++ mbuild killed \n\n"
	143	else
	144	printf "\n\n *** mbuild finished \n\n"
	145	fi' exit
	146
	147
[503]	148	# IN CASE OF TERMINAL-BREAK:
[83]	149	trap 'rm -rf $working_directory/tmp_mbuild
[69]	150	printf "\n\n +++ mbuild killed by \"^C\" \n\n"
[1]	151	exit
	152	' 2
	153
	154
[215]	155	tmp_mbuild=${working_directory}/tmp_mbuild
[1]	156
[503]	157	# READ SHELLSCRIPT-OPTIONS
[475]	158	while getopts :c:h:m:s:u option
[1]	159	do
	160	case $option in
	161	(c) config_file=$OPTARG;;
	162	(h) host=$OPTARG;;
	163	(m) makefile=$OPTARG;;
	164	(s) suf=$OPTARG;;
[22]	165	(u) compile_utility_programs=true;;
[1]	166	(\?) printf "\n +++ unknown option $OPTARG \n";
	167	locat=parameter; exit;;
	168	esac
	169	done
	170
	171
	172
[503]	173	# CHECK, IF CONFIGURATION-FILE EXISTS
[82]	174	if [[ ! -f $config_file ]]
	175	then
	176	printf "\n +++ configuration file: "
	177	printf "\n $config_file"
	178	printf "\n does not exist"
	179	locat=configuration; exit
	180	fi
	181
	182
	183
[503]	184	# DETERMINE THE LOCAL HOST
[1]	185	local_host_real_name=$(hostname)
[69]	186	# local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
	187
[1]	188
[82]	189
[503]	190	# DETERMINE HOST-IDENTIFIER (local_host) FROM THE CONFIG-FILE
[82]	191	line=""
[215]	192	grep "%host_identifier" $config_file > $tmp_mbuild
[82]	193	while read line
	194	do
[116]	195	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
[82]	196	then
	197	HOSTNAME=`echo $line \| cut -d" " -s -f2`
	198	host_identifier=`echo $line \| cut -d" " -s -f3`
[83]	199	if [[ $local_host_real_name = $HOSTNAME ]]
[82]	200	then
	201	local_host=$host_identifier
	202	break
	203	fi
	204	fi
[215]	205	done < $tmp_mbuild
[82]	206
	207	if [[ "$local_host" = "" ]]
	208	then
	209	printf "\n +++ no host identifier found in configuration file \"$config_file\""
	210	printf "\n for local host \"$local_host_real_name\"."
	211	printf "\n Please add line"
	212	printf "\n \"\%host_identifier $local_host_real_name <identifier>\""
	213	printf "\n to the configuration file."
	214	locat=local_host; exit
	215	fi
	216
	217
	218
[1]	219	[[ $local_host_real_name = scirocco ]] && scirocco=true
[67]	220	[[ $local_host_real_name = fimm.bccs.uib.no ]] && fimm=true
[1]	221
	222
	223
	224	if [[ $local_host != ibms ]]
	225	then
	226	config_file=$PWD/$config_file
	227	else
	228	config_file=`pwd`/$config_file
	229	fi
	230
	231
	232
[503]	233	# DETERMINE USER NAME ON LOCAL HOST FROM THE CONFIG-FILE
[1]	234	line=""
[215]	235	grep " $local_host" $config_file \| grep "%remote_username" > $tmp_mbuild
[69]	236	while read line
[1]	237	do
[116]	238	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
[1]	239	then
	240	local_username=`echo $line \| cut -d" " -s -f2`
	241	fi
[215]	242	done < $tmp_mbuild
[1]	243
[82]	244
[1]	245	if [[ "$local_username" = "" ]]
	246	then
	247	printf "\n +++ no user name found in configuration file"
	248	printf "\n for local host \"$local_host\" "
	249	locat=config_file; exit
	250	fi
	251
	252
[503]	253	# DETERMINE LOCAL SOURCE-CODE PATH.
	254	# FIRST CHECK, IF A GLOBAL SOURCE-CODE PATH HAS BEEN DECLARED FOR ALL HOSTS.
	255	# THEREFORE, FIRST SET ALL GLOBAL VARIABLES DECLARED IN THE CONFIG-FILE,
	256	# BECAUSE THEY MAY BE USED AS PART OF THE PATH NAME.
[5]	257	line=""
[215]	258	grep "%" $config_file > $tmp_mbuild
[69]	259	while read line
[5]	260	do
[116]	261	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" && $(echo $line \| cut -c1) != "#" ]]
[1]	262	then
[5]	263	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
	264	value=`echo $line \| cut -d" " -s -f2`
[8]	265	eval export $var=\$value
[1]	266	fi
[215]	267	done < $tmp_mbuild
[1]	268
[503]	269	# NOW CHECK, IF A GLOBAL SOURCE-CODE-PATH HAS BEEN DECLARED
[1]	270	line=""
[215]	271	grep "%source_path" $config_file > $tmp_mbuild
[69]	272	while read line
[1]	273	do
	274	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	275	then
	276	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
	277	then
	278	global_source_path=`echo $line \| cut -d" " -s -f2`
	279	fi
	280	fi
[215]	281	done < $tmp_mbuild
[1]	282
	283	line=""
[215]	284	grep " $local_host" $config_file \| grep "%source_path" > $tmp_mbuild
[69]	285	while read line
[1]	286	do
	287	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	288	then
	289	local_source_path=`echo $line \| cut -d" " -s -f2`
	290	fi
[215]	291	done < $tmp_mbuild
[1]	292
	293	if [[ "$local_source_path" = "" ]]
	294	then
	295	if [[ "$global_source_path" != "" ]]
	296	then
	297	local_source_path=$global_source_path
	298	else
	299	printf "\n +++ no source path found in configuration file"
	300	printf "\n for local host \"$local_host\" "
	301	printf "\n please set \"\%source_path\" in configuration file"
	302	locat=config_file; exit
	303	fi
	304	fi
	305	eval local_source_path=$local_source_path
[8]	306	eval local_source_path=$local_source_path
[1]	307
	308
[215]	309
[503]	310	# DETERMINE GLOBAL DEPOSITORY-PATH
[1]	311	line=""
[215]	312	grep "%depository_path" $config_file > $tmp_mbuild
[69]	313	while read line
[1]	314	do
	315	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	316	then
	317	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
	318	then
	319	global_depository_path=`echo $line \| cut -d" " -s -f2`
	320	fi
	321	fi
[215]	322	done < $tmp_mbuild
[1]	323
	324
	325
[503]	326	# CHECK, IF A MAIN PROGRAM HAS BEEN DEFINED IN THE CONFIG-FILE
[5]	327	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
	328	then
	329	printf "\n +++ no main program or more than one main program defined"
	330	printf "\n in configuration file"
	331	locat=configuration; exit
	332	else
	333	line=`grep "%mainprog" $config_file`
	334	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
	335	then
	336	printf "\n +++ no main program defined in configuration file"
	337	locat=configuration; exit
	338	fi
	339	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
	340	fi
	341
	342
	343
[503]	344	# CHECK IF MAKEFILE EXITS
[1]	345	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
	346	if [[ ! -f $makefile ]]
	347	then
	348	printf "\n +++ makefile: "
	349	printf "\n $makefile"
	350	printf "\n does not exist"
	351	locat=makefile; exit
	352	fi
	353
	354
[503]	355	# HEADER-OUTPUT (PART1: MESSAGES CONCERNING THE LOCAL HOST)
[1]	356	calltime=$(date)
	357	printf "\n"
	358	printf "#------------------------------------------------------------------------# \n"
	359	printf "\| $version$calltime \| \n"
	360	printf "\| \| \n"
	361	column1="called on:"; column2=$local_host_real_name
	362	printf "\| $column1$column2 \| \n"
	363	column1="local username:"; column2=$local_username
	364	printf "\| $column1$column2 \| \n"
	365	column1="local IP-addres:"; column2=$local_addres
	366	printf "\| $column1$column2 \| \n"
	367	column1="config file:"; column2=$config_file
	368	printf "\| $column1$column2 \| \n"
	369	column1="makefile:"; column2=$makefile
	370	printf "\| $column1$column2 \| \n"
	371	column1="local source path:"; column2=$local_source_path
	372	printf "\| $column1$column2 \| \n"
	373	printf "#------------------------------------------------------------------------# \n"
	374
	375	# printf "\| \| \n"
	376
	377
[40]	378	if [[ $compile_utility_programs = false ]]
	379	then
[1]	380
[503]	381	# IN ANY CASE, GIVE ALL FILES WRITE-PERMIT, IN ORDER TO AVOID PROBLEMS
	382	# WITH OVERWRITING FILES ON THE REMOTE HOST
[215]	383	cd $local_source_path
	384	printf "\n\n *** tar of makefile and source files in $local_source_path"
[40]	385	tar -cf ${mainprog}_sources.tar Makefile *.$suf
	386	printf "\n"
[1]	387
[40]	388	fi
[1]	389
	390
[40]	391
[503]	392	# GET CONFIRMATION TO CONTINUE
[1]	393	if [[ $host = all ]]
	394	then
	395	printf "\n *** updates will be made for ALL hosts found in"
	396	printf "\n the configuration file"
	397	else
	398	printf "\n *** update will be made for host \"$host\" "
	399	fi
	400
	401	if [[ $silent = false ]]
	402	then
	403	answer=dummy
	404	printf "\n\n"
	405	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
	406	do
	407	printf " >>> continue (y/n) ? "
	408	read answer
	409	done
	410	if [[ $answer = n \|\| $answer = N ]]
	411	then
	412	locat=user_abort; exit
	413	fi
	414	fi
	415
	416
	417
	418
	419	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
	420	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
	421	printf "\n *** scanning configuration file for host(s) ..."
	422
[215]	423	grep %fopts $config_file > $tmp_mbuild
[69]	424	while read line
[1]	425	do
	426	# KOMMENTARZEILEN UEBERSPRINGEN
	427	[[ $(echo $line \| cut -c1) = "#" ]] && continue
	428	(( ihost = ihost + 1 ))
	429	hostline[$ihost]="$line"
[215]	430	done < $tmp_mbuild
[1]	431
	432
	433	while (( ih < ihost ))
	434	do
	435
	436	(( ih = ih + 1 ))
	437
	438	# REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
	439	# NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
	440	# SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
	441	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
	442	remote_host=`echo $remote_host_string \| cut -d" " -f1`
	443	if [[ $host != all ]]
	444	then
	445	[[ $remote_host != $host ]] && continue
	446	fi
	447	host_found=true
	448	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
	449	if [[ $condition1 = $remote_host ]]
	450	then
	451	condition1=""
	452	else
	453	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
	454	fi
	455
[493]	456	modules=""
[82]	457	netcdf_inc=""
	458	netcdf_lib=""
[1]	459
	460	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
	461	case $remote_host in
[116]	462	(lcmuk) remote_addres=130.75.105.2;;
[181]	463	(lcsgib) remote_addres=130.73.232.102;;
[346]	464	(lcsgih) remote_addres=130.75.4.102;;
[367]	465	(lck) remote_addres=165.132.26.61;;
[83]	466	(lctit) remote_addres=172.17.75.161;;
[206]	467	(lcxt4) remote_addres=129.177.20.113;;
[437]	468	(lcxt5m) remote_addres=193.166.211.144;;
[83]	469	(decalpha) remote_addres=165.132.26.56;;
[305]	470	(ibmh) remote_addres=136.172.40.15;;
[83]	471	(ibms) remote_addres=150.183.5.101;;
	472	(ibmy) remote_addres=165.132.26.58;;
	473	(nech) remote_addres=136.172.44.192;;
	474	(neck) remote_addres=133.5.178.11;;
	475	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
	476	(*) if [[ $local_host != $remote_host ]]
[1]	477	then
[83]	478	printf "\n +++ remote host \"$remote_host\" unknown";
[503]	479	printf "\n please inform PALM group support!"
[1]	480	fi;;
	481	esac
	482
	483
	484	# REMOTE-USERNAMEN ERMITTELN
	485	line=""
[116]	486	found=false
[215]	487	grep "$remote_host_string" $config_file \| grep "%remote_username" > $tmp_mbuild
[69]	488	while read line1
[1]	489	do
[116]	490
[1]	491	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	492	then
	493	line="$line1"
	494	fi
[116]	495
	496	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	497	then
	498	remote_username=`echo $line \| cut -d" " -s -f2`
	499	found=true
	500	fi
	501
[215]	502	done < $tmp_mbuild
[1]	503
[116]	504	if [[ $found = false ]]
[1]	505	then
	506	printf "\n +++ no remote username found in configuration file"
	507	printf "\n for \"$remote_host_string\" "
	508	locat=config_file; exit
	509	fi
	510
	511
	512	# REMOTE-QUELLTEXTPFAD ERMITTELN
	513	line=""
[54]	514	remote_source_path=""
[215]	515	grep "$remote_host_string" $config_file \| grep "%source_path" > $tmp_mbuild
[69]	516	while read line1
[1]	517	do
[116]	518
[1]	519	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	520	then
	521	line="$line1"
	522	fi
[116]	523
	524	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	525	then
	526	remote_source_path=`echo $line \| cut -d" " -s -f2`
	527	fi
	528
[215]	529	done < $tmp_mbuild
[1]	530
	531	if [[ "$remote_source_path" = "" ]]
	532	then
	533	if [[ "$global_source_path" != "" ]]
	534	then
	535	remote_source_path=$global_source_path
	536	else
	537	printf "\n +++ no source path found in configuration file"
	538	printf "\n for \"$remote_host_string\" "
	539	locat=config_file; exit
	540	fi
	541	fi
	542
[22]	543	remote_ud=${remote_source_path}/../UTIL
[24]	544	remote_ud=$(eval echo $remote_ud)
[1]	545
[54]	546
[1]	547	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
[54]	548	remote_md=""
[1]	549	line=""
[215]	550	grep "$remote_host_string" $config_file \| grep "%depository_path" > $tmp_mbuild
[69]	551	while read line1
[1]	552	do
[116]	553
[1]	554	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	555	then
	556	line="$line1"
	557	fi
[116]	558
	559	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	560	then
	561	remote_md=`echo $line \| cut -d" " -s -f2`
	562	fi
	563
[215]	564	done < $tmp_mbuild
[1]	565
	566	if [[ "$remote_md" = "" ]]
	567	then
	568	if [[ "$global_depository_path" != "" ]]
	569	then
	570	remote_md=$global_depository_path
	571	else
	572	printf "\n +++ no depository path found in configuration file"
	573	printf "\n for \"$remote_host_string\" "
	574	printf "\n please set \"\%depository_path\" in configuration file"
	575	locat=config_file; exit
	576	fi
	577	fi
	578
[8]	579	remote_md=$(eval echo $remote_md)
[503]	580	block=""
	581	[[ "$condition1" != "" ]] && block=_$condition1
	582	[[ "$condition2" != "" ]] && block=${block}_$condition2
[508]	583	remote_md=${remote_md}$block
[1]	584
[8]	585
[1]	586	# COMPILERNAMEN ERMITTELN
	587	line=""
[116]	588	found=false
[215]	589	grep "$remote_host_string" $config_file \| grep "%compiler_name " > $tmp_mbuild
[69]	590	while read line1
[1]	591	do
[116]	592
[1]	593	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	594	then
	595	line="$line1"
	596	fi
[116]	597
	598	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	599	then
	600	compiler_name=`echo $line \| cut -d" " -s -f2`
	601	found=true
	602	fi
	603
[215]	604	done < $tmp_mbuild
[1]	605
[116]	606	if [[ $found = false ]]
[1]	607	then
	608	printf "\n +++ no compiler name found in configuration file"
	609	printf "\n for \"$remote_host_string\" "
	610	locat=config_file; exit
	611	fi
	612
	613
[27]	614	# BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
	615	# SERIELLER COMPILERNAME ERMITTELT WERDEN
	616	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
	617	then
	618	line=""
[116]	619	found=false
[215]	620	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" > $tmp_mbuild
[69]	621	while read line1
[27]	622	do
[116]	623
[27]	624	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	625	then
	626	line="$line1"
	627	fi
[116]	628
	629	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	630	then
	631	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
	632	found=true
	633	fi
	634
[215]	635	done < $tmp_mbuild
[1]	636
[116]	637	if [[ $found = false ]]
[27]	638	then
[28]	639	printf "\n +++ no serial compiler name found in configuration file"
[27]	640	printf "\n for \"$remote_host_string\" "
	641	locat=config_file; exit
	642	fi
	643	else
	644	compiler_name_ser=$compiler_name
	645	fi
	646
	647
	648
[82]	649	# PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
	650	line=""
[116]	651	found=false
[215]	652	grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
[82]	653	while read line1
	654	do
[116]	655
[82]	656	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	657	then
	658	line="$line1"
	659	fi
[116]	660
	661	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	662	then
	663	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	664	cpp_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	665	found=true
	666	fi
	667
[215]	668	done < $tmp_mbuild
[116]	669
	670	if [[ $found = false ]]
[82]	671	then
	672	printf "\n +++ no preprocessor options found in configuration file"
	673	printf "\n for \"$remote_host_string\" "
	674	locat=config_file; exit
	675	fi
	676
[116]	677
[82]	678	# RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
	679	for string in $remote_host_string
	680	do
	681	if [[ $(echo $remote_host \| cut -c1-2) = lc && $(echo $string \| cut -c1-2) = lc ]]
	682	then
	683	cpp_options="$cpp_options -D__lc "
[83]	684	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $(echo $string \| cut -c1-3) = ibm ]]
	685	then
	686	cpp_options="${cpp_options},-D__ibm"
	687	elif [[ $(echo $remote_host \| cut -c1-3) = nec && $(echo $string \| cut -c1-3) = nec ]]
	688	then
	689	cpp_options="${cpp_options} -D__nec"
[82]	690	else
[83]	691	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
	692	then
	693	cpp_options="${cpp_options},-D__$string"
	694	else
	695	cpp_options="$cpp_options -D__$string "
	696	fi
[82]	697	fi
	698	done
	699
	700
	701
	702	# NETCDF-OPTIONEN ERMITTELN
	703	line=""
[215]	704	grep "$remote_host_string" $config_file \| grep "%netcdf_inc" > $tmp_mbuild
[82]	705	while read line1
	706	do
[116]	707
[82]	708	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	709	then
	710	line="$line1"
	711	fi
[116]	712
	713	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	714	then
	715	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	716	netcdf_inc=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	717	fi
	718
[215]	719	done < $tmp_mbuild
[82]	720
	721	line=""
[215]	722	grep "$remote_host_string" $config_file \| grep "%netcdf_lib" > $tmp_mbuild
[82]	723	while read line1
	724	do
[116]	725
[82]	726	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	727	then
	728	line="$line1"
	729	fi
[116]	730
	731	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	732	then
	733	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	734	netcdf_lib=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	735	fi
	736
[215]	737	done < $tmp_mbuild
[82]	738
	739
	740
[475]	741	# get make options
	742	line=""
	743	found=false
	744	grep "$remote_host_string" $config_file \| grep "%mopts" > $tmp_mbuild
	745	while read line1
	746	do
	747
	748	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	749	then
	750	line="$line1"
	751	fi
	752
	753	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	754	then
	755	# remove colons from directive string
	756	make_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	757
	758	fi
	759
	760	done < $tmp_mbuild
	761
	762
	763
[1]	764	# COMPILEROPTIONEN ERMITTELN
	765	line=""
[116]	766	found=false
[215]	767	grep "$remote_host_string" $config_file \| grep "%fopts" > $tmp_mbuild
[69]	768	while read line1
[1]	769	do
[116]	770
[1]	771	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	772	then
	773	line="$line1"
	774	fi
[116]	775
	776	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	777	then
	778	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	779	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	780	found=true
	781
	782	# NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
	783	compiler_options="$compiler_options $netcdf_inc"
	784	fi
	785
[215]	786	done < $tmp_mbuild
[116]	787
	788	if [[ $found = false ]]
[1]	789	then
	790	printf "\n +++ no compiler options found in configuration file"
	791	printf "\n for \"$remote_host_string\" "
	792	locat=config_file; exit
	793	fi
[82]	794
[1]	795
	796
[503]	797	# get modules to be loaded
[221]	798	line=""
[493]	799	grep "$remote_host_string" $config_file \| grep "%modules" > $tmp_mbuild
[221]	800	while read line1
	801	do
	802
	803	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	804	then
	805	line="$line1"
	806	fi
	807
	808	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	809	then
	810	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
[493]	811	modules=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
[221]	812	fi
	813
	814	done < $tmp_mbuild
	815
	816
	817
	818
[1]	819	# LADER-OPTIONEN ERMITTELN
	820	line=""
[116]	821	found=false
[215]	822	grep "$remote_host_string" $config_file \| grep "%lopts" > $tmp_mbuild
[69]	823	while read line1
[1]	824	do
[116]	825
[1]	826	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	827	then
	828	line="$line1"
	829	fi
[116]	830
	831	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	832	then
	833	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	834	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	835	found=true
	836
	837	# NETCDF-LIBRARY HINZUFUEGEN
	838	loader_options="$loader_options $netcdf_lib"
	839	fi
	840
[215]	841	done < $tmp_mbuild
[1]	842
[116]	843	if [[ $found = false ]]
[1]	844	then
	845	printf "\n +++ no loader options found in configuration file"
	846	printf "\n for \"$remote_host_string\" "
	847	locat=config_file; exit
	848	fi
[82]	849
[1]	850
	851	printf "\n\n#------------------------------------------------------------------------# \n"
	852	if [[ $remote_host = $local_host ]]
	853	then
	854	column1="remote_host:"; column2="$remote_host (= local host!)"
	855	else
	856	column1="remote_host:"; column2=$remote_host
	857	fi
	858	printf "\| $column1$column2 \| \n"
	859	printf "\| \| \n"
	860	column1="conditions:"; column2="$condition1 $condition2"
	861	printf "\| $column1$column2 \| \n"
	862	column1="make depository:"; column2=$remote_md
	863	printf "\| $column1$column2 \| \n"
[215]	864	line=$(echo "$remote_md" \| cut -c51-)
	865	while [[ "$line" != "" ]]
	866	do
	867	column1=""
	868	column2=$line
	869	printf "\| $column1$column2 \| \n"
	870	line=$(echo "$line" \| cut -c51-)
	871	done
[25]	872	if [[ $compile_utility_programs = true ]]
	873	then
	874	column1="utility directory:"; column2=$remote_ud
	875	printf "\| $column1$column2 \| \n"
	876	fi
[1]	877	column1="username:"; column2=$remote_username
	878	printf "\| $column1$column2 \| \n"
	879	column1="addres:"; column2=$remote_addres
	880	printf "\| $column1$column2 \| \n"
	881	column1="compiler:"; column2=$compiler_name
	882	printf "\| $column1$column2 \| \n"
[28]	883	if [[ $compile_utility_programs = true ]]
	884	then
	885	column1="serial compiler:"; column2=$compiler_name_ser
	886	printf "\| $column1$column2 \| \n"
	887	fi
[475]	888	if [[ "$make_options" != "" ]]
	889	then
	890	column1="make options:"; column2=$make_options
	891	printf "\| $column1$column2 \| \n"
	892	fi
[1]	893	column1="cpp options:"; column2=$cpp_options
	894	printf "\| $column1$column2 \| \n"
	895	line=$(echo "$cpp_options" \| cut -c51-)
	896	while [[ "$line" != "" ]]
	897	do
	898	column1=""
	899	column2=$line
	900	printf "\| $column1$column2 \| \n"
	901	line=$(echo "$line" \| cut -c51-)
	902	done
	903	column1="compiler options:"; column2=$compiler_options
	904	printf "\| $column1$column2 \| \n"
	905	line=$(echo "$compiler_options" \| cut -c51-)
	906	while [[ "$line" != "" ]]
	907	do
	908	column1=""
	909	column2=$line
	910	printf "\| $column1$column2 \| \n"
	911	line=$(echo "$line" \| cut -c51-)
	912	done
	913	column1="loader options:"; column2=$loader_options
	914	printf "\| $column1$column2 \| \n"
	915	line=$(echo "$loader_options" \| cut -c51-)
	916	while [[ "$line" != "" ]]
	917	do
	918	column1=""
	919	column2=$line
	920	printf "\| $column1$column2 \| \n"
	921	line=$(echo "$line" \| cut -c51-)
	922	done
[493]	923	if [[ $modules != "" ]]
	924	then
	925	column1="modules to be load:"; column2=$modules
	926	printf "\| $column1$column2 \| \n"
	927	line=$(echo "$modules" \| cut -c51-)
	928	while [[ "$line" != "" ]]
	929	do
	930	column1=""
	931	column2=$line
	932	printf "\| $column1$column2 \| \n"
	933	line=$(echo "$line" \| cut -c51-)
	934	done
	935	fi
[1]	936	printf "#------------------------------------------------------------------------# \n"
	937
	938	if [[ $silent = false ]]
	939	then
	940	answer=dummy
	941	printf "\n\n"
	942	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
	943	do
	944	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
	945	read answer
	946	done
	947	if [[ $answer = a \|\| $answer = A ]]
	948	then
	949	locat=user_abort; exit
	950	fi
	951	if [[ $answer = c \|\| $answer = C ]]
	952	then
[503]	953	silent=true
[1]	954	fi
	955	if [[ $answer = s \|\| $answer = S ]]
	956	then
	957	continue
	958	fi
	959	fi
	960
	961
[475]	962	# make on remote host
	963	if [[ $remote_host != $local_host ]]
[1]	964	then
	965
[475]	966	if [[ $compile_utility_programs = false ]]
[1]	967	then
	968
[475]	969	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	970	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
	971	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
	972	if [[ $remote_host != lctit ]]
	973	then
	974	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
	975	else
	976	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	977	# MIT SSH, DESHALB AUFRUF PER PIPE
	978	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
	979	fi
	980	if [[ $local_host = decalpha ]]
	981	then
	982	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
	983	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	984	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	985	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
	986	/bin/scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
	987	else
	988	scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
	989	fi
[1]	990
	991
	992
[475]	993	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
	994	echo " *** untar previous update on remote host, if existing"
	995	if [[ $remote_host != lctit ]]
	996	then
	997	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
	998	else
	999	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	1000	# MIT SSH, DESHALB AUFRUF PER PIPE
	1001	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
	1002	fi
[1]	1003
	1004
[475]	1005	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
	1006	echo " *** untar actual sources on remote host"
	1007	if [[ $remote_host != lctit ]]
	1008	then
	1009	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
	1010	else
	1011	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	1012	# MIT SSH, DESHALB AUFRUF PER PIPE
	1013	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
	1014	fi
[1]	1015
	1016
[475]	1017	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1018	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
	1019	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
	1020	# Z.B. DIE PFADE ZUM COMPILER)
	1021	echo " *** execute \"make\" on remote host"
[1]	1022
[493]	1023
	1024	# generate make call with make options
[475]	1025	if [[ $remote_host = nech ]]
	1026	then
	1027	make_call_string="sxmake $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1028	else
	1029	make_call_string="make $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1030	fi
[1]	1031
[493]	1032	# generate command to load modules, if modules are given
	1033	if [[ "$modules" != "" ]]
	1034	then
	1035	module_calls="module load ${modules};"
[503]	1036	else
	1037	module_calls=""
[493]	1038	fi
	1039
[475]	1040	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
	1041	then
[1]	1042
[493]	1043	ssh ${remote_username}@${remote_addres} "$module_calls cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1044
[475]	1045	elif [[ $remote_host = ibmh ]]
	1046	then
[1]	1047
[493]	1048	print "$module_calls export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1049
[475]	1050	elif [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
	1051	then
[1]	1052
[493]	1053	print ". /usr/share/modules/init/bash; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1054
[475]	1055	elif [[ $remote_host = lctit ]]
	1056	then
[1]	1057
[475]	1058	echo " " > ${remote_host}_last_make_protokoll
	1059	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
	1060	do
	1061	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1062	done
[1]	1063
[475]	1064	elif [[ $remote_host = lcxt4 ]]
[1]	1065	then
	1066
[493]	1067	print ". /opt/modules/default/init/ksh; $module_calls cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1068
[475]	1069	else
[1]	1070
[493]	1071	print "cd $module_calls ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1072
[475]	1073	fi
[1]	1074
[475]	1075	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
	1076	then
	1077	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
	1078	if [[ $silent = false ]]
[40]	1079	then
[475]	1080	answer=dummy
	1081	printf "\n"
	1082	while [[ "$answer" != c && "$answer" != k ]]
[40]	1083	do
[475]	1084	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
	1085	read answer
	1086	if [[ "$answer" = l ]]
	1087	then
	1088	more ${remote_host}_last_make_protokoll
	1089	fi
[40]	1090	done
[475]	1091	if [[ $answer = k ]]
[40]	1092	then
[475]	1093	locat=user_abort; exit
[1]	1094	fi
	1095	fi
[475]	1096	fi
[1]	1097
	1098
	1099
[475]	1100	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
	1101	printf "\n *** tar update on remote host ..."
	1102	if [[ $remote_host != lctit ]]
	1103	then
	1104	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod"
	1105	else
	1106	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	1107	# MIT SSH, DESHALB AUFRUF PER PIPE
	1108	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
	1109	fi
[1]	1110
	1111
[475]	1112	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
	1113	# printf "\n *** \"make clean\" on remote host ..."
	1114	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
	1115	# printf "\n"
[1]	1116
	1117
[25]	1118
	1119
[475]	1120	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
	1121	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	1122	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
	1123	elif [[ $compile_utility_programs = true ]]
	1124	then
	1125
	1126	printf "\n\n"
	1127	echo " *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
	1128	cd ${local_source_path}/../SCRIPTS
	1129
	1130	if [[ $remote_host != lctit ]]
[22]	1131	then
[475]	1132	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
	1133	else
[503]	1134	# TIT ERLAUBT NUR DIE AUSFUEHRUNG GANZ BESTIMMTER KOMMANDOS
[475]	1135	# MIT SSH, DESHALB AUFRUF PER PIPE
	1136	print "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_addres} 2>&1
	1137	fi
[22]	1138
[475]	1139	# KOPIEREN DER SCRIPTE
	1140	if [[ $local_host = decalpha ]]
	1141	then
[503]	1142	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTAENDIGEN PFADES
[475]	1143	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1144	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1145	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
	1146	/bin/scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
	1147	else
	1148	scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
	1149	fi
[22]	1150
[475]	1151	cd - > /dev/null
	1152	cd ${local_source_path}/../UTIL
[22]	1153
[27]	1154
[475]	1155	# KOPIEREN DER UTILITY-PROGRAMME
	1156	if [[ $local_host = decalpha ]]
	1157	then
	1158	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
	1159	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1160	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1161	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
	1162	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
	1163	else
	1164	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
	1165	fi
[27]	1166
	1167
[22]	1168
[475]	1169	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1170	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
	1171	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
	1172	# Z.B. DIE PFADE ZUM COMPILER)
	1173	echo " *** execute \"make\" on remote host"
[22]	1174
[475]	1175	if [[ $remote_host = nech ]]
	1176	then
[503]	1177	make_call_string="sxmake $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
[475]	1178	else
[503]	1179	make_call_string="make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
[475]	1180	fi
[22]	1181
[493]	1182	# generate command to load modules, if modules are given
	1183	if [[ "$modules" != "" ]]
	1184	then
	1185	module_calls="module load ${modules};"
[503]	1186	else
	1187	module_calls=""
[493]	1188	fi
	1189
[475]	1190	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
	1191	then
[22]	1192
[493]	1193	ssh ${remote_username}@${remote_addres} "$module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
[22]	1194
[475]	1195	elif [[ $remote_host = ibmh ]]
	1196	then
[22]	1197
[493]	1198	print "$module_calls export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres}
[22]	1199
[475]	1200	elif [[ $remote_host = lctit ]]
	1201	then
[22]	1202
[475]	1203	echo " " > ${remote_host}_last_make_protokoll
	1204	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
	1205	do
[493]	1206	print "$module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[475]	1207	done
[22]	1208
[475]	1209	elif [[ $remote_host = lcxt4 ]]
	1210	then
[22]	1211
[493]	1212	print ". /opt/modules/default/init/ksh; $module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[22]	1213
[475]	1214	else
[407]	1215
[493]	1216	print "$module_calls cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[407]	1217
[475]	1218	fi
[22]	1219
[475]	1220	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
[22]	1221
[475]	1222	rm -rf ${remote_host}_last_make_protokoll
[22]	1223
[475]	1224	# make on local host
	1225	else
[22]	1226
[475]	1227	if [[ $compile_utility_programs = false ]]
	1228	then
[22]	1229
[475]	1230	# DEPOSITORY VERZEICHNIS ERZEUGEN, FALLS NOCH NICHT VORHANDEN
	1231	eval remote_md=$remote_md
	1232	if [[ ! -d $remote_md ]]
[40]	1233	then
[475]	1234	if mkdir $remote_md
[215]	1235	then
[475]	1236	printf "\n\n *** directory for make depository:"
	1237	printf "\n $remote_md"
	1238	printf "\n was created\n"
	1239	else
	1240	printf "\n +++ directory for make depository:"
	1241	printf "\n $remote_md"
	1242	printf "\n cannot be created"
	1243	locat=local_depository_path; exit
[215]	1244	fi
[475]	1245	fi
[215]	1246
[475]	1247	# QUELLTEXT-DATEIEN AUS REPOSITORY INS DEPOSITORY KOPIEREN
	1248	echo " "
	1249	echo " *** updating sources in $remote_md"
	1250	cd $remote_md
	1251	cp $local_source_path/${mainprog}_sources.tar .
	1252	tar xf ${mainprog}_sources.tar
[215]	1253
[475]	1254	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
	1255	echo " "
	1256	echo " *** execute \"make\" on local host"
[1]	1257
[493]	1258	# first load modules, if given
	1259	if [[ "$modules" != "" ]]
	1260	then
	1261	module load ${modules}
	1262	fi
	1263
[475]	1264	make $make_options PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
[40]	1265
[475]	1266	if [[ $? != 0 ]]
	1267	then
	1268	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
	1269	if [[ $silent = false ]]
[1]	1270	then
[475]	1271	answer=dummy
	1272	printf "\n"
	1273	while [[ "$answer" != c && "$answer" != k ]]
	1274	do
	1275	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
	1276	read answer
	1277	if [[ "$answer" = l ]]
[1]	1278	then
[475]	1279	more ${remote_host}_last_make_protokoll
[1]	1280	fi
[475]	1281	done
	1282	if [[ $answer = k ]]
	1283	then
	1284	locat=user_abort; exit
[1]	1285	fi
	1286	fi
[475]	1287	fi
[1]	1288
	1289
[503]	1290	# TAR NEW VERSION ON LOCAL HOST
[475]	1291	printf "\n *** tar update on local host ..."
	1292	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
[1]	1293
[22]	1294
[475]	1295	# COMPILE THE UTILITY PROGRAMS
	1296	elif [[ $compile_utility_programs = true ]]
	1297	then
	1298	printf "\n\n"
	1299	echo " *** compiling the utility programs ..."
	1300	cd ${local_source_path}/../UTIL
[503]	1301
	1302	# TOUCH FILES IN ORDER TO FORCE COMPILATION FOR EVERY BLOCK
	1303	touch *.f90
	1304	make $make_options BLOCK=$block F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
[475]	1305	cd - > /dev/null
[1]	1306	fi
	1307
	1308	fi
[475]	1309
[1]	1310	done
	1311
	1312
	1313	if [[ $host_found = false ]]
	1314	then
	1315	if [[ $host = all ]]
	1316	then
	1317	printf "\n +++ no hosts found in configuration file"
	1318	else
	1319	printf "\n +++ host \"$host\" not found in configuration file"
	1320	fi
	1321	locat=config_file; exit
	1322	fi
	1323
	1324
	1325
[503]	1326	# FINAL WORK
[1]	1327	rm -f hosts_found_in_config_file
	1328

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |