Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 475

Last change on this file since 475 was 475, checked in by raasch, 14 years ago
make options can be set in configuration file; bugfix for generating serial jobs; bugfix for masked output
Property svn:keywords set to `Id Rev`
File size: 45.8 KB

Rev	Line
[1]	1	#!/bin/ksh
[66]	2	# mbuild - Programmuebersetzungsscript
[169]	3	# $Id: mbuild 475 2010-02-04 02:26:16Z raasch $
[1]	4
	5	# Prozedur zur Uebersetzung von Programmteilen mittels make-Mechanismus
	6	# auf einem Remote-Rechner, ausgehend von Quellcode auf einem lokalen
	7	# Rechner
	8
	9	# Folgende Probleme existieren unter Linux, wenn keine AT&T-Korn-Shell
	10	# verwendet wird:
	11	# Wertzuweisungen an Variablen innerhalb von DO-Schleifen werden nicht
	12	# nach aussen weitergegeben. "while read line" funktioniert nicht
	13	# innerhalb einer Pipe.
	14
	15	# letzte Aenderung:
	16	# 06/05/02 - Siggi - Beginn der Entwicklung
	17	# 12/06/02 - Siggi - Abschluss der Entwicklungsarbeiten
	18	# 23/06/02 - Siggi - voerst kein make-clean, Abbruch bei batch-mode
	19	# 24/07/02 - Siggi - Keine Verwendung der temporaeren Datei tmp_mbuild
	20	# unter linux mehr noetig, da nun AT&T-Korn-Shell
	21	# benutzt wird
	22	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) validiert
	23	# 19/12/02 - Siggi - ibmb validiert
	24	# 05/02/03 - Siggi - hostname nobela included
	25	# 04/03/03 - Siggi - host nech included
	26	# 06/03/03 - Siggi - make_call_string is echoed without '' to
	27	# file LAST_MAKE_CALL (otherwise error on NEC, because
	28	# '' are part of compiler options
	29	# 16/03/03 - Siggi - Two underscores are placed in front of every define
	30	# string, in case that palm.f90 version contains
	31	# such strings
	32	# 16/04/03 - Siggi - First extensions for linux machines
	33	# 24/06/03 - Siggi - host orkan included
	34	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
	35	# 24/07/03 - Siggi - host maestro admitted
	36	# 06/08/03 - Siggi - host gregale admitted
	37	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
	38	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
	39	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
	40	# (-D$OMP=OMP) in order to avoid problems with
	41	# OMP_NUM_THREADS
	42	# 09/01/04 - Siggi - action above cancelled
	43	# 28/01/04 - Siggi - action above re-cancelled
	44	# 08/03/04 - Siggi - host scirocco admitted
	45	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
	46	# the respective .f90 file is not listed in the makefile
	47	# and deletion is demanded by the user
	48	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
	49	# due to error in ssh installation (otherwise a prompt
	50	# for the password appears)
	51	# 23/07/04 - Siggi - changes due to the new berni configuration
	52	# (federation switch)
	53	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
	54	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
	55	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
	56	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
	57	# 24/04/05 - Siggi - netcdf support on lcmuk
	58	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
	59	# 12/05/05 - Siggi - netcdf support on ibm
	60	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
	61	# 18/05/05 - Siggi - netcdf support on nec
	62	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
	63	# 23/05/05 - Siggi - netcdf support on ibms
	64	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
	65	# 30/06/05 - Siggi - netcdf support on bora
	66	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
	67	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
	68	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
	69	# host gfdl5 (ibmy) admitted
	70	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
	71	# 20/01/06 - Siggi - cpp directive for ibmy
	72	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
	73	# 10/02/06 - Siggi - modifications for scp on decalpha
	74	# 13/04/06 - Siggi - ostria admitted
	75	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
	76	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
	77	# 29/05/05 - Siggi - atmos (lcide) admitted
	78	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
	79	# 24/11/06 - Siggi - breva and levanto admitted
	80	# 07/02/07 - Siggi - adapted for RIAM (neck)
[5]	81	# 10/02/07 - Siggi - all hpmuk-related code removed
[40]	82	# 02/03/07 - Siggi - compilation of utility programs and transfer of
[27]	83	# scripts to remote hosts added (option -u)
[66]	84	# 14/03/07 - Siggi - fimm admitted, revision number added to terminal
	85	# output
[69]	86	# 16/03/07 - Siggi - adjustments (netcdf) for lctit
	87	# adjustments for running under pdksh, local ip-addres
	88	# is not determined any more
[82]	89	# 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
	90	# from configuration file
	91	# host identifier (local_host) is read from config file
[116]	92	# 10/10/07 - Siggi - bugfix: handling of comment lines
[181]	93	# 18/07/08 - Siggi - adapted for lcsgih
	94	# 21/07/08 - Siggi - mainprog (executable) is added to the tar-file
	95	# ({mainprog}_current_version)
[206]	96	# 02/10/08 - Siggi - adapted for lcxt4
[215]	97	# 14/11/08 - Siggi - update mechanism completely revised: source tarfile
	98	# remains in source directory, one depository per block
[266]	99	# (given in the config-file) is created, allways all
	100	# files from the source directory are copied to the
	101	# respective depository, no additional file checks are
	102	# done any more (version 2.1)
[224]	103	# 13/01/09 - Marcus- re-enable compilation more than once on lcmuk (as on
	104	# other machines)
[266]	105	# 21/03/09 - Siggi - -u copies also copies process_dvr_output and
	106	# .dvrserver.config
[305]	107	# 21/04/09 - Siggi - adjustments for new IBM at DKRZ, which is now ibmh
[367]	108	# 25/08/09 - BjornM- adapted for lck
[407]	109	# 01/12/09 - BjornM- re-adjustments for lcxt4
[437]	110	# 01/02/10 - Siggi - adjustments for lcxt5m
[475]	111	# 03/02/10 - Siggi - make options (mopts) to be set by configuration file
	112	# implemented, remoted mode option -r completely
	113	# removed, t3e related parts removed
[1]	114
	115
	116
	117	# VARIABLENVEREINBARUNGEN + DEFAULTWERTE
[22]	118	compile_utility_programs=false
[1]	119	config_file=.mrun.config
[67]	120	fimm=false
[1]	121	host=all
	122	host_found=false
	123	locat=normal
	124	makefile=""
	125	scirocco=false
	126	silent=false
	127	suf=f90
	128	update=false
[83]	129	working_directory=`pwd`
[1]	130
	131	typeset -i ih ihost=0
	132
[66]	133	typeset -R30 calltime
[1]	134	typeset -L20 column1
	135	typeset -L50 column2
	136	typeset -L70 column3
[215]	137	typeset -L40 version="MBUILD 2.1 Rev$Rev: 475 $"
[1]	138
	139	# FEHLERBEHANDLUNG
	140	# BEI EXIT:
[83]	141	trap 'rm -rf $working_directory/tmp_mbuild
[69]	142	if [[ $locat != normal ]]
[1]	143	then
	144	printf "\n\n +++ mbuild killed \n\n"
	145	else
	146	printf "\n\n *** mbuild finished \n\n"
	147	fi' exit
	148
	149
	150	# BEI TERMINAL-BREAK:
[83]	151	trap 'rm -rf $working_directory/tmp_mbuild
[69]	152	printf "\n\n +++ mbuild killed by \"^C\" \n\n"
[1]	153	exit
	154	' 2
	155
	156
[215]	157	tmp_mbuild=${working_directory}/tmp_mbuild
[1]	158
	159	# SHELLSCRIPT-OPTIONEN EINLESEN
[475]	160	while getopts :c:h:m:s:u option
[1]	161	do
	162	case $option in
	163	(c) config_file=$OPTARG;;
	164	(h) host=$OPTARG;;
	165	(m) makefile=$OPTARG;;
	166	(s) suf=$OPTARG;;
[22]	167	(u) compile_utility_programs=true;;
[1]	168	(\?) printf "\n +++ unknown option $OPTARG \n";
	169	locat=parameter; exit;;
	170	esac
	171	done
	172
	173
	174
[82]	175	# PRUEFEN, OB KONFIGURATIONS-DATEI VORHANDEN
	176	if [[ ! -f $config_file ]]
	177	then
	178	printf "\n +++ configuration file: "
	179	printf "\n $config_file"
	180	printf "\n does not exist"
	181	locat=configuration; exit
	182	fi
	183
	184
	185
[1]	186	# LOKALEN RECHNER ERMITTELN
	187	local_host_real_name=$(hostname)
[69]	188	# local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
	189
[1]	190
[82]	191
	192	# HOST-IDENTIFIER (local_host) AUS KONFIGURATIONSDATEI BESTIMMEN
	193	line=""
[215]	194	grep "%host_identifier" $config_file > $tmp_mbuild
[82]	195	while read line
	196	do
[116]	197	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
[82]	198	then
	199	HOSTNAME=`echo $line \| cut -d" " -s -f2`
	200	host_identifier=`echo $line \| cut -d" " -s -f3`
[83]	201	if [[ $local_host_real_name = $HOSTNAME ]]
[82]	202	then
	203	local_host=$host_identifier
	204	break
	205	fi
	206	fi
[215]	207	done < $tmp_mbuild
[82]	208
	209	if [[ "$local_host" = "" ]]
	210	then
	211	printf "\n +++ no host identifier found in configuration file \"$config_file\""
	212	printf "\n for local host \"$local_host_real_name\"."
	213	printf "\n Please add line"
	214	printf "\n \"\%host_identifier $local_host_real_name <identifier>\""
	215	printf "\n to the configuration file."
	216	locat=local_host; exit
	217	fi
	218
	219
	220
[1]	221	[[ $local_host_real_name = scirocco ]] && scirocco=true
[67]	222	[[ $local_host_real_name = fimm.bccs.uib.no ]] && fimm=true
[1]	223
	224
	225
	226	if [[ $local_host != ibms ]]
	227	then
	228	config_file=$PWD/$config_file
	229	else
	230	config_file=`pwd`/$config_file
	231	fi
	232
	233
	234
	235	# BENUTZERNAMEN AUF LOKALEM RECHNER AUS KONFIGURATIONSDATEI ERMITTELN
	236	line=""
[215]	237	grep " $local_host" $config_file \| grep "%remote_username" > $tmp_mbuild
[69]	238	while read line
[1]	239	do
[116]	240	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
[1]	241	then
	242	local_username=`echo $line \| cut -d" " -s -f2`
	243	fi
[215]	244	done < $tmp_mbuild
[1]	245
[82]	246
[1]	247	if [[ "$local_username" = "" ]]
	248	then
	249	printf "\n +++ no user name found in configuration file"
	250	printf "\n for local host \"$local_host\" "
	251	locat=config_file; exit
	252	fi
	253
	254
[5]	255	# LOKALEN QUELLTEXTPFAD ERMITTELN.
	256	# ZUERST PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD FUER ALLE RECHNER
	257	# VEREINBART WURDE.
	258	# DAZU ZUNAECHST ALLE IN DER KONFIGURATIONSDATEI VEREINBARTEN GLOBALEN
	259	# VARIABLEN SETZEN, WEIL DIESE EVTL. IN PFADNAMEN VERWENDET WERDEN
	260	line=""
[215]	261	grep "%" $config_file > $tmp_mbuild
[69]	262	while read line
[5]	263	do
[116]	264	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" && $(echo $line \| cut -c1) != "#" ]]
[1]	265	then
[5]	266	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
	267	value=`echo $line \| cut -d" " -s -f2`
[8]	268	eval export $var=\$value
[9]	269	# eval echo \" $var=\$$var \" # AUSGABE ZU TESTZWECKEN
[1]	270	fi
[215]	271	done < $tmp_mbuild
[1]	272
[5]	273	# NUN PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD VEREINBART WURDE
[1]	274	line=""
[215]	275	grep "%source_path" $config_file > $tmp_mbuild
[69]	276	while read line
[1]	277	do
	278	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	279	then
	280	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
	281	then
	282	global_source_path=`echo $line \| cut -d" " -s -f2`
	283	fi
	284	fi
[215]	285	done < $tmp_mbuild
[1]	286
	287	line=""
[215]	288	grep " $local_host" $config_file \| grep "%source_path" > $tmp_mbuild
[69]	289	while read line
[1]	290	do
	291	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	292	then
	293	local_source_path=`echo $line \| cut -d" " -s -f2`
	294	fi
[215]	295	done < $tmp_mbuild
[1]	296
	297	if [[ "$local_source_path" = "" ]]
	298	then
	299	if [[ "$global_source_path" != "" ]]
	300	then
	301	local_source_path=$global_source_path
	302	else
	303	printf "\n +++ no source path found in configuration file"
	304	printf "\n for local host \"$local_host\" "
	305	printf "\n please set \"\%source_path\" in configuration file"
	306	locat=config_file; exit
	307	fi
	308	fi
	309	eval local_source_path=$local_source_path
[8]	310	eval local_source_path=$local_source_path
[1]	311
	312
[215]	313
	314	# GLOBALEN DEPOSITORY-PFAD ERMITTELN
[1]	315	line=""
[215]	316	grep "%depository_path" $config_file > $tmp_mbuild
[69]	317	while read line
[1]	318	do
	319	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	320	then
	321	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
	322	then
	323	global_depository_path=`echo $line \| cut -d" " -s -f2`
	324	fi
	325	fi
[215]	326	done < $tmp_mbuild
[1]	327
	328
	329
[5]	330	# PRUEFEN, OB IN KONFIGURATIONSDATEI EIN HAUPTPROGRAMM
	331	# VEREINBART WURDE
	332	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
	333	then
	334	printf "\n +++ no main program or more than one main program defined"
	335	printf "\n in configuration file"
	336	locat=configuration; exit
	337	else
	338	line=`grep "%mainprog" $config_file`
	339	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
	340	then
	341	printf "\n +++ no main program defined in configuration file"
	342	locat=configuration; exit
	343	fi
	344	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
	345	fi
	346
	347
	348
[1]	349	# MAKEFILE vorhanden
	350	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
	351	if [[ ! -f $makefile ]]
	352	then
	353	printf "\n +++ makefile: "
	354	printf "\n $makefile"
	355	printf "\n does not exist"
	356	locat=makefile; exit
	357	fi
	358
	359
	360	# HEADER-AUSGABE (TEIL1: MELDUNGEN UEBER LOKALEN RECHNER)
	361	calltime=$(date)
	362	printf "\n"
	363	printf "#------------------------------------------------------------------------# \n"
	364	printf "\| $version$calltime \| \n"
	365	printf "\| \| \n"
	366	column1="called on:"; column2=$local_host_real_name
	367	printf "\| $column1$column2 \| \n"
	368	column1="local username:"; column2=$local_username
	369	printf "\| $column1$column2 \| \n"
	370	column1="local IP-addres:"; column2=$local_addres
	371	printf "\| $column1$column2 \| \n"
	372	column1="config file:"; column2=$config_file
	373	printf "\| $column1$column2 \| \n"
	374	column1="makefile:"; column2=$makefile
	375	printf "\| $column1$column2 \| \n"
	376	column1="local source path:"; column2=$local_source_path
	377	printf "\| $column1$column2 \| \n"
	378	printf "#------------------------------------------------------------------------# \n"
	379
	380	# printf "\| \| \n"
	381
	382
[40]	383	if [[ $compile_utility_programs = false ]]
	384	then
[1]	385
[40]	386	# IN JEDEM FALL ALLEN DATEIEN WRITE-PERMIT GEBEN, DAMIT ES AUF
	387	# DEN REMOTE-RECHNERN NICHT EVTL. ZU PROBLEMEN BEIM UEBERSCHREIBEN KOMMT
[215]	388	cd $local_source_path
	389	printf "\n\n *** tar of makefile and source files in $local_source_path"
[40]	390	tar -cf ${mainprog}_sources.tar Makefile *.$suf
	391	printf "\n"
[1]	392
[40]	393	fi
[1]	394
	395
[40]	396
[1]	397	# BESTAETIGUNG ZUM WEITERMACHEN EINHOLEN
	398	if [[ $host = all ]]
	399	then
	400	printf "\n *** updates will be made for ALL hosts found in"
	401	printf "\n the configuration file"
	402	else
	403	printf "\n *** update will be made for host \"$host\" "
	404	fi
	405
	406	if [[ $silent = false ]]
	407	then
	408	answer=dummy
	409	printf "\n\n"
	410	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
	411	do
	412	printf " >>> continue (y/n) ? "
	413	read answer
	414	done
	415	if [[ $answer = n \|\| $answer = N ]]
	416	then
	417	locat=user_abort; exit
	418	fi
	419	fi
	420
	421
	422
	423
	424	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
	425	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
	426	printf "\n *** scanning configuration file for host(s) ..."
	427
[215]	428	grep %fopts $config_file > $tmp_mbuild
[69]	429	while read line
[1]	430	do
	431	# KOMMENTARZEILEN UEBERSPRINGEN
	432	[[ $(echo $line \| cut -c1) = "#" ]] && continue
	433	(( ihost = ihost + 1 ))
	434	hostline[$ihost]="$line"
[215]	435	done < $tmp_mbuild
[1]	436
	437
	438	while (( ih < ihost ))
	439	do
	440
	441	(( ih = ih + 1 ))
	442
	443	# REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
	444	# NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
	445	# SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
	446	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
	447	remote_host=`echo $remote_host_string \| cut -d" " -f1`
	448	if [[ $host != all ]]
	449	then
	450	[[ $remote_host != $host ]] && continue
	451	fi
	452	host_found=true
	453	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
	454	if [[ $condition1 = $remote_host ]]
	455	then
	456	condition1=""
	457	else
	458	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
	459	fi
	460
[82]	461	netcdf_inc=""
	462	netcdf_lib=""
[1]	463
	464	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
	465	case $remote_host in
[116]	466	(lcmuk) remote_addres=130.75.105.2;;
[181]	467	(lcsgib) remote_addres=130.73.232.102;;
[346]	468	(lcsgih) remote_addres=130.75.4.102;;
[367]	469	(lck) remote_addres=165.132.26.61;;
[83]	470	(lctit) remote_addres=172.17.75.161;;
[206]	471	(lcxt4) remote_addres=129.177.20.113;;
[437]	472	(lcxt5m) remote_addres=193.166.211.144;;
[83]	473	(decalpha) remote_addres=165.132.26.56;;
[305]	474	(ibmh) remote_addres=136.172.40.15;;
[83]	475	(ibms) remote_addres=150.183.5.101;;
	476	(ibmy) remote_addres=165.132.26.58;;
	477	(nech) remote_addres=136.172.44.192;;
	478	(neck) remote_addres=133.5.178.11;;
	479	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
	480	(*) if [[ $local_host != $remote_host ]]
[1]	481	then
[83]	482	printf "\n +++ remote host \"$remote_host\" unknown";
	483	printf "\n please inform S. Raasch!"
[1]	484	fi;;
	485	esac
	486
	487
	488	# REMOTE-USERNAMEN ERMITTELN
	489	line=""
[116]	490	found=false
[215]	491	grep "$remote_host_string" $config_file \| grep "%remote_username" > $tmp_mbuild
[69]	492	while read line1
[1]	493	do
[116]	494
[1]	495	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	496	then
	497	line="$line1"
	498	fi
[116]	499
	500	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	501	then
	502	remote_username=`echo $line \| cut -d" " -s -f2`
	503	found=true
	504	fi
	505
[215]	506	done < $tmp_mbuild
[1]	507
[116]	508	if [[ $found = false ]]
[1]	509	then
	510	printf "\n +++ no remote username found in configuration file"
	511	printf "\n for \"$remote_host_string\" "
	512	locat=config_file; exit
	513	fi
	514
	515
	516	# REMOTE-QUELLTEXTPFAD ERMITTELN
	517	line=""
[54]	518	remote_source_path=""
[215]	519	grep "$remote_host_string" $config_file \| grep "%source_path" > $tmp_mbuild
[69]	520	while read line1
[1]	521	do
[116]	522
[1]	523	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	524	then
	525	line="$line1"
	526	fi
[116]	527
	528	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	529	then
	530	remote_source_path=`echo $line \| cut -d" " -s -f2`
	531	fi
	532
[215]	533	done < $tmp_mbuild
[1]	534
	535	if [[ "$remote_source_path" = "" ]]
	536	then
	537	if [[ "$global_source_path" != "" ]]
	538	then
	539	remote_source_path=$global_source_path
	540	else
	541	printf "\n +++ no source path found in configuration file"
	542	printf "\n for \"$remote_host_string\" "
	543	locat=config_file; exit
	544	fi
	545	fi
	546
[22]	547	remote_ud=${remote_source_path}/../UTIL
[24]	548	remote_ud=$(eval echo $remote_ud)
[1]	549
[54]	550
[1]	551	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
[54]	552	remote_md=""
[1]	553	line=""
[215]	554	grep "$remote_host_string" $config_file \| grep "%depository_path" > $tmp_mbuild
[69]	555	while read line1
[1]	556	do
[116]	557
[1]	558	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	559	then
	560	line="$line1"
	561	fi
[116]	562
	563	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	564	then
	565	remote_md=`echo $line \| cut -d" " -s -f2`
	566	fi
	567
[215]	568	done < $tmp_mbuild
[1]	569
	570	if [[ "$remote_md" = "" ]]
	571	then
	572	if [[ "$global_depository_path" != "" ]]
	573	then
	574	remote_md=$global_depository_path
	575	else
	576	printf "\n +++ no depository path found in configuration file"
	577	printf "\n for \"$remote_host_string\" "
	578	printf "\n please set \"\%depository_path\" in configuration file"
	579	locat=config_file; exit
	580	fi
	581	fi
	582
[8]	583	remote_md=$(eval echo $remote_md)
[215]	584	[[ "$condition1" != "" ]] && remote_md=${remote_md}_$condition1
	585	[[ "$condition2" != "" ]] && remote_md=${remote_md}_$condition2
[1]	586
[8]	587
[1]	588	# COMPILERNAMEN ERMITTELN
	589	line=""
[116]	590	found=false
[215]	591	grep "$remote_host_string" $config_file \| grep "%compiler_name " > $tmp_mbuild
[69]	592	while read line1
[1]	593	do
[116]	594
[1]	595	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	596	then
	597	line="$line1"
	598	fi
[116]	599
	600	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	601	then
	602	compiler_name=`echo $line \| cut -d" " -s -f2`
	603	found=true
	604	fi
	605
[215]	606	done < $tmp_mbuild
[1]	607
[116]	608	if [[ $found = false ]]
[1]	609	then
	610	printf "\n +++ no compiler name found in configuration file"
	611	printf "\n for \"$remote_host_string\" "
	612	locat=config_file; exit
	613	fi
	614
	615
[27]	616	# BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
	617	# SERIELLER COMPILERNAME ERMITTELT WERDEN
	618	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
	619	then
	620	line=""
[116]	621	found=false
[215]	622	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" > $tmp_mbuild
[69]	623	while read line1
[27]	624	do
[116]	625
[27]	626	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	627	then
	628	line="$line1"
	629	fi
[116]	630
	631	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	632	then
	633	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
	634	found=true
	635	fi
	636
[215]	637	done < $tmp_mbuild
[1]	638
[116]	639	if [[ $found = false ]]
[27]	640	then
[28]	641	printf "\n +++ no serial compiler name found in configuration file"
[27]	642	printf "\n for \"$remote_host_string\" "
	643	locat=config_file; exit
	644	fi
	645	else
	646	compiler_name_ser=$compiler_name
	647	fi
	648
	649
	650
[82]	651	# PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
	652	line=""
[116]	653	found=false
[215]	654	grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
[82]	655	while read line1
	656	do
[116]	657
[82]	658	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	659	then
	660	line="$line1"
	661	fi
[116]	662
	663	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	664	then
	665	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	666	cpp_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	667	found=true
	668	fi
	669
[215]	670	done < $tmp_mbuild
[116]	671
	672	if [[ $found = false ]]
[82]	673	then
	674	printf "\n +++ no preprocessor options found in configuration file"
	675	printf "\n for \"$remote_host_string\" "
	676	locat=config_file; exit
	677	fi
	678
[116]	679
[82]	680	# RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
	681	for string in $remote_host_string
	682	do
	683	if [[ $(echo $remote_host \| cut -c1-2) = lc && $(echo $string \| cut -c1-2) = lc ]]
	684	then
	685	cpp_options="$cpp_options -D__lc "
[83]	686	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $(echo $string \| cut -c1-3) = ibm ]]
	687	then
	688	cpp_options="${cpp_options},-D__ibm"
	689	elif [[ $(echo $remote_host \| cut -c1-3) = nec && $(echo $string \| cut -c1-3) = nec ]]
	690	then
	691	cpp_options="${cpp_options} -D__nec"
[82]	692	else
[83]	693	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
	694	then
	695	cpp_options="${cpp_options},-D__$string"
	696	else
	697	cpp_options="$cpp_options -D__$string "
	698	fi
[82]	699	fi
	700	done
	701
	702
	703
	704	# NETCDF-OPTIONEN ERMITTELN
	705	line=""
[215]	706	grep "$remote_host_string" $config_file \| grep "%netcdf_inc" > $tmp_mbuild
[82]	707	while read line1
	708	do
[116]	709
[82]	710	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	711	then
	712	line="$line1"
	713	fi
[116]	714
	715	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	716	then
	717	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	718	netcdf_inc=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	719	fi
	720
[215]	721	done < $tmp_mbuild
[82]	722
	723	line=""
[215]	724	grep "$remote_host_string" $config_file \| grep "%netcdf_lib" > $tmp_mbuild
[82]	725	while read line1
	726	do
[116]	727
[82]	728	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	729	then
	730	line="$line1"
	731	fi
[116]	732
	733	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	734	then
	735	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	736	netcdf_lib=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	737	fi
	738
[215]	739	done < $tmp_mbuild
[82]	740
	741
	742
[475]	743	# get make options
	744	line=""
	745	found=false
	746	grep "$remote_host_string" $config_file \| grep "%mopts" > $tmp_mbuild
	747	while read line1
	748	do
	749
	750	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	751	then
	752	line="$line1"
	753	fi
	754
	755	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	756	then
	757	# remove colons from directive string
	758	make_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	759
	760	fi
	761
	762	done < $tmp_mbuild
	763
	764
	765
[1]	766	# COMPILEROPTIONEN ERMITTELN
	767	line=""
[116]	768	found=false
[215]	769	grep "$remote_host_string" $config_file \| grep "%fopts" > $tmp_mbuild
[69]	770	while read line1
[1]	771	do
[116]	772
[1]	773	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	774	then
	775	line="$line1"
	776	fi
[116]	777
	778	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	779	then
	780	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	781	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	782	found=true
	783
	784	# NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
	785	compiler_options="$compiler_options $netcdf_inc"
	786	fi
	787
[215]	788	done < $tmp_mbuild
[116]	789
	790	if [[ $found = false ]]
[1]	791	then
	792	printf "\n +++ no compiler options found in configuration file"
	793	printf "\n for \"$remote_host_string\" "
	794	locat=config_file; exit
	795	fi
[82]	796
[1]	797
	798
[221]	799	# MPI LIBRARY ERMITTELN
	800	line=""
	801	found=false
	802	grep "$remote_host_string" $config_file \| grep "%mpilib" > $tmp_mbuild
	803	while read line1
	804	do
	805
	806	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	807	then
	808	line="$line1"
	809	fi
	810
	811	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	812	then
	813	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	814	mpilib=`echo $line \| cut -d" " -s -f2`
	815	found=true
	816	fi
	817
	818	done < $tmp_mbuild
	819
	820	[[ $found = false ]] && mpilib=mpt
	821
	822
	823
	824
[1]	825	# LADER-OPTIONEN ERMITTELN
	826	line=""
[116]	827	found=false
[215]	828	grep "$remote_host_string" $config_file \| grep "%lopts" > $tmp_mbuild
[69]	829	while read line1
[1]	830	do
[116]	831
[1]	832	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	833	then
	834	line="$line1"
	835	fi
[116]	836
	837	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	838	then
	839	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	840	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	841	found=true
	842
	843	# NETCDF-LIBRARY HINZUFUEGEN
	844	loader_options="$loader_options $netcdf_lib"
	845	fi
	846
[215]	847	done < $tmp_mbuild
[1]	848
[116]	849	if [[ $found = false ]]
[1]	850	then
	851	printf "\n +++ no loader options found in configuration file"
	852	printf "\n for \"$remote_host_string\" "
	853	locat=config_file; exit
	854	fi
[82]	855
[1]	856
	857	printf "\n\n#------------------------------------------------------------------------# \n"
	858	if [[ $remote_host = $local_host ]]
	859	then
	860	column1="remote_host:"; column2="$remote_host (= local host!)"
	861	else
	862	column1="remote_host:"; column2=$remote_host
	863	fi
	864	printf "\| $column1$column2 \| \n"
	865	printf "\| \| \n"
	866	column1="conditions:"; column2="$condition1 $condition2"
	867	printf "\| $column1$column2 \| \n"
	868	column1="make depository:"; column2=$remote_md
	869	printf "\| $column1$column2 \| \n"
[215]	870	line=$(echo "$remote_md" \| cut -c51-)
	871	while [[ "$line" != "" ]]
	872	do
	873	column1=""
	874	column2=$line
	875	printf "\| $column1$column2 \| \n"
	876	line=$(echo "$line" \| cut -c51-)
	877	done
[25]	878	if [[ $compile_utility_programs = true ]]
	879	then
	880	column1="utility directory:"; column2=$remote_ud
	881	printf "\| $column1$column2 \| \n"
	882	fi
[1]	883	column1="username:"; column2=$remote_username
	884	printf "\| $column1$column2 \| \n"
	885	column1="addres:"; column2=$remote_addres
	886	printf "\| $column1$column2 \| \n"
	887	column1="compiler:"; column2=$compiler_name
	888	printf "\| $column1$column2 \| \n"
[28]	889	if [[ $compile_utility_programs = true ]]
	890	then
	891	column1="serial compiler:"; column2=$compiler_name_ser
	892	printf "\| $column1$column2 \| \n"
	893	fi
[475]	894	if [[ "$make_options" != "" ]]
	895	then
	896	column1="make options:"; column2=$make_options
	897	printf "\| $column1$column2 \| \n"
	898	fi
[1]	899	column1="cpp options:"; column2=$cpp_options
	900	printf "\| $column1$column2 \| \n"
	901	line=$(echo "$cpp_options" \| cut -c51-)
	902	while [[ "$line" != "" ]]
	903	do
	904	column1=""
	905	column2=$line
	906	printf "\| $column1$column2 \| \n"
	907	line=$(echo "$line" \| cut -c51-)
	908	done
	909	column1="compiler options:"; column2=$compiler_options
	910	printf "\| $column1$column2 \| \n"
	911	line=$(echo "$compiler_options" \| cut -c51-)
	912	while [[ "$line" != "" ]]
	913	do
	914	column1=""
	915	column2=$line
	916	printf "\| $column1$column2 \| \n"
	917	line=$(echo "$line" \| cut -c51-)
	918	done
[221]	919	if [[ $( echo $remote_host \| cut -c1-5 ) = lcsgi ]]
	920	then
	921	column1="mpi library:"; column2=$mpilib
	922	printf "\| $column1$column2 \| \n"
	923	fi
[1]	924	column1="loader options:"; column2=$loader_options
	925	printf "\| $column1$column2 \| \n"
	926	line=$(echo "$loader_options" \| cut -c51-)
	927	while [[ "$line" != "" ]]
	928	do
	929	column1=""
	930	column2=$line
	931	printf "\| $column1$column2 \| \n"
	932	line=$(echo "$line" \| cut -c51-)
	933	done
	934	printf "#------------------------------------------------------------------------# \n"
	935
	936	if [[ $silent = false ]]
	937	then
	938	answer=dummy
	939	printf "\n\n"
	940	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
	941	do
	942	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
	943	read answer
	944	done
	945	if [[ $answer = a \|\| $answer = A ]]
	946	then
	947	locat=user_abort; exit
	948	fi
	949	if [[ $answer = c \|\| $answer = C ]]
	950	then
	951	silent=false
	952	fi
	953	if [[ $answer = s \|\| $answer = S ]]
	954	then
	955	continue
	956	fi
	957	fi
	958
	959
[475]	960	# make on remote host
	961	if [[ $remote_host != $local_host ]]
[1]	962	then
	963
[475]	964	if [[ $compile_utility_programs = false ]]
[1]	965	then
	966
[475]	967	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	968	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
	969	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
	970	if [[ $remote_host != lctit ]]
	971	then
	972	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
	973	else
	974	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	975	# MIT SSH, DESHALB AUFRUF PER PIPE
	976	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
	977	fi
	978	if [[ $local_host = decalpha ]]
	979	then
	980	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
	981	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	982	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	983	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
	984	/bin/scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
	985	else
	986	scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
	987	fi
[1]	988
	989
	990
[475]	991	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
	992	echo " *** untar previous update on remote host, if existing"
	993	if [[ $remote_host != lctit ]]
	994	then
	995	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
	996	else
	997	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	998	# MIT SSH, DESHALB AUFRUF PER PIPE
	999	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
	1000	fi
[1]	1001
	1002
[475]	1003	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
	1004	echo " *** untar actual sources on remote host"
	1005	if [[ $remote_host != lctit ]]
	1006	then
	1007	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
	1008	else
	1009	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	1010	# MIT SSH, DESHALB AUFRUF PER PIPE
	1011	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
	1012	fi
[1]	1013
	1014
[475]	1015	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1016	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
	1017	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
	1018	# Z.B. DIE PFADE ZUM COMPILER)
	1019	echo " *** execute \"make\" on remote host"
[1]	1020
[475]	1021	if [[ $remote_host = nech ]]
	1022	then
	1023	make_call_string="sxmake $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1024	else
	1025	make_call_string="make $make_options PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1026	fi
[1]	1027
[475]	1028	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
	1029	then
[1]	1030
[475]	1031	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1032
[475]	1033	elif [[ $remote_host = ibmh ]]
	1034	then
[1]	1035
[475]	1036	print "export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1037
[475]	1038	elif [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
	1039	then
[1]	1040
[475]	1041	print ". /usr/share/modules/init/bash; module load ifort/11.0.069; module load $mpilib; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1042	# print ". /usr/share/modules/init/bash; module load mvapich2/1.2rc1-intel; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1043	# print ". /usr/share/modules/init/bash; module load mvapich2; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1044
[475]	1045	elif [[ $remote_host = lctit ]]
	1046	then
[1]	1047
[475]	1048	echo " " > ${remote_host}_last_make_protokoll
	1049	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
	1050	do
	1051	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1052	done
[1]	1053
[475]	1054	elif [[ $remote_host = lcxt4 ]]
[1]	1055	then
	1056
[475]	1057	print ". /opt/modules/default/init/ksh; module load Base-opts/2.1.56HDA; module load modules/3.1.6; module load pgi/9.0.4; module load PrgEnv-pgi/2.1.56HDA; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1058
[475]	1059	else
[1]	1060
[475]	1061	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1062
[475]	1063	fi
[1]	1064
[475]	1065	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
	1066	then
	1067	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
	1068	if [[ $silent = false ]]
[40]	1069	then
[475]	1070	answer=dummy
	1071	printf "\n"
	1072	while [[ "$answer" != c && "$answer" != k ]]
[40]	1073	do
[475]	1074	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
	1075	read answer
	1076	if [[ "$answer" = l ]]
	1077	then
	1078	more ${remote_host}_last_make_protokoll
	1079	fi
[40]	1080	done
[475]	1081	if [[ $answer = k ]]
[40]	1082	then
[475]	1083	locat=user_abort; exit
[1]	1084	fi
	1085	fi
[475]	1086	fi
[1]	1087
	1088
	1089
[475]	1090	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
	1091	printf "\n *** tar update on remote host ..."
	1092	if [[ $remote_host != lctit ]]
	1093	then
	1094	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod"
	1095	else
	1096	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	1097	# MIT SSH, DESHALB AUFRUF PER PIPE
	1098	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
	1099	fi
[1]	1100
	1101
[475]	1102	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
	1103	# printf "\n *** \"make clean\" on remote host ..."
	1104	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
	1105	# printf "\n"
[1]	1106
	1107
[25]	1108
	1109
[475]	1110	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
	1111	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	1112	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
	1113	elif [[ $compile_utility_programs = true ]]
	1114	then
	1115
	1116	printf "\n\n"
	1117	echo " *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
	1118	cd ${local_source_path}/../SCRIPTS
	1119
	1120	if [[ $remote_host != lctit ]]
[22]	1121	then
[475]	1122	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
	1123	else
	1124	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
	1125	# MIT SSH, DESHALB AUFRUF PER PIPE
	1126	print "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_addres} 2>&1
	1127	fi
[22]	1128
[475]	1129	# KOPIEREN DER SCRIPTE
	1130	if [[ $local_host = decalpha ]]
	1131	then
	1132	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
	1133	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1134	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1135	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
	1136	/bin/scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
	1137	else
	1138	scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
	1139	fi
[22]	1140
[475]	1141	cd - > /dev/null
	1142	cd ${local_source_path}/../UTIL
[22]	1143
[27]	1144
[475]	1145	# KOPIEREN DER UTILITY-PROGRAMME
	1146	if [[ $local_host = decalpha ]]
	1147	then
	1148	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
	1149	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1150	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1151	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
	1152	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
	1153	else
	1154	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
	1155	fi
[27]	1156
	1157
[22]	1158
[475]	1159	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1160	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
	1161	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
	1162	# Z.B. DIE PFADE ZUM COMPILER)
	1163	echo " *** execute \"make\" on remote host"
[22]	1164
[475]	1165	if [[ $remote_host = nech ]]
	1166	then
	1167	make_call_string="sxmake F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1168	else
	1169	make_call_string="make F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1170	fi
[22]	1171
[475]	1172	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
	1173	then
[22]	1174
[475]	1175	ssh ${remote_username}@${remote_addres} "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
[22]	1176
[475]	1177	elif [[ $remote_host = ibmh ]]
	1178	then
[22]	1179
[475]	1180	print "export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres}
[22]	1181
[475]	1182	elif [[ $remote_host = lctit ]]
	1183	then
[22]	1184
[475]	1185	echo " " > ${remote_host}_last_make_protokoll
	1186	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
	1187	do
	1188	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1189	done
[22]	1190
[475]	1191	elif [[ $remote_host = lcxt4 ]]
	1192	then
[22]	1193
[475]	1194	print ". /opt/modules/default/init/ksh; module load Base-opts/2.1.56HDA; module load modules/3.1.6; module load pgi/9.0.4; module load PrgEnv-pgi/2.1.56HDA; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[22]	1195
[475]	1196	else
[407]	1197
[475]	1198	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[407]	1199
[475]	1200	fi
[22]	1201
[475]	1202	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
[22]	1203
[475]	1204	rm -rf ${remote_host}_last_make_protokoll
[22]	1205
[475]	1206	# make on local host
	1207	else
[22]	1208
[475]	1209	if [[ $compile_utility_programs = false ]]
	1210	then
[22]	1211
[475]	1212	# DEPOSITORY VERZEICHNIS ERZEUGEN, FALLS NOCH NICHT VORHANDEN
	1213	eval remote_md=$remote_md
	1214	if [[ ! -d $remote_md ]]
[40]	1215	then
[475]	1216	if mkdir $remote_md
[215]	1217	then
[475]	1218	printf "\n\n *** directory for make depository:"
	1219	printf "\n $remote_md"
	1220	printf "\n was created\n"
	1221	else
	1222	printf "\n +++ directory for make depository:"
	1223	printf "\n $remote_md"
	1224	printf "\n cannot be created"
	1225	locat=local_depository_path; exit
[215]	1226	fi
[475]	1227	fi
[215]	1228
[475]	1229	# QUELLTEXT-DATEIEN AUS REPOSITORY INS DEPOSITORY KOPIEREN
	1230	echo " "
	1231	echo " *** updating sources in $remote_md"
	1232	cd $remote_md
	1233	cp $local_source_path/${mainprog}_sources.tar .
	1234	tar xf ${mainprog}_sources.tar
[215]	1235
[475]	1236	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
	1237	echo " "
	1238	echo " *** execute \"make\" on local host"
[1]	1239
[475]	1240	make $make_options PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
[40]	1241
[475]	1242	if [[ $? != 0 ]]
	1243	then
	1244	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
	1245	if [[ $silent = false ]]
[1]	1246	then
[475]	1247	answer=dummy
	1248	printf "\n"
	1249	while [[ "$answer" != c && "$answer" != k ]]
	1250	do
	1251	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
	1252	read answer
	1253	if [[ "$answer" = l ]]
[1]	1254	then
[475]	1255	more ${remote_host}_last_make_protokoll
[1]	1256	fi
[475]	1257	done
	1258	if [[ $answer = k ]]
	1259	then
	1260	locat=user_abort; exit
[1]	1261	fi
	1262	fi
[475]	1263	fi
[1]	1264
	1265
[475]	1266	# NEUE VERSION AUF LOKALEM RECHNER ZUSAMMENPACKEN
	1267	printf "\n *** tar update on local host ..."
	1268	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
[1]	1269
[22]	1270
[475]	1271	# COMPILE THE UTILITY PROGRAMS
	1272	elif [[ $compile_utility_programs = true ]]
	1273	then
	1274	printf "\n\n"
	1275	echo " *** compiling the utility programs ..."
	1276	cd ${local_source_path}/../UTIL
	1277	make F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
	1278	cd - > /dev/null
[1]	1279	fi
	1280
	1281	fi
[475]	1282
[1]	1283	done
	1284
	1285
	1286	if [[ $host_found = false ]]
	1287	then
	1288	if [[ $host = all ]]
	1289	then
	1290	printf "\n +++ no hosts found in configuration file"
	1291	else
	1292	printf "\n +++ host \"$host\" not found in configuration file"
	1293	fi
	1294	locat=config_file; exit
	1295	fi
	1296
	1297
	1298
	1299	# ABSCHLIESSENDE ARBEITEN
	1300	rm -f hosts_found_in_config_file
	1301

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |