Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 407

Last change on this file since 407 was 407, checked in by maronga, 15 years ago
humidity for non-flat topography implemented, re-adjustments for lcxt4
Property svn:keywords set to `Id Rev`
File size: 49.0 KB

Rev	Line
[1]	1	#!/bin/ksh
[66]	2	# mbuild - Programmuebersetzungsscript
[169]	3	# $Id: mbuild 407 2009-12-01 15:01:15Z maronga $
[1]	4
	5	# Prozedur zur Uebersetzung von Programmteilen mittels make-Mechanismus
	6	# auf einem Remote-Rechner, ausgehend von Quellcode auf einem lokalen
	7	# Rechner
	8
	9	# Folgende Probleme existieren unter Linux, wenn keine AT&T-Korn-Shell
	10	# verwendet wird:
	11	# Wertzuweisungen an Variablen innerhalb von DO-Schleifen werden nicht
	12	# nach aussen weitergegeben. "while read line" funktioniert nicht
	13	# innerhalb einer Pipe.
	14
	15	# letzte Aenderung:
	16	# 06/05/02 - Siggi - Beginn der Entwicklung
	17	# 12/06/02 - Siggi - Abschluss der Entwicklungsarbeiten
	18	# 23/06/02 - Siggi - voerst kein make-clean, Abbruch bei batch-mode
	19	# 24/07/02 - Siggi - Keine Verwendung der temporaeren Datei tmp_mbuild
	20	# unter linux mehr noetig, da nun AT&T-Korn-Shell
	21	# benutzt wird
	22	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) validiert
	23	# 19/12/02 - Siggi - ibmb validiert
	24	# 05/02/03 - Siggi - hostname nobela included
	25	# 04/03/03 - Siggi - host nech included
	26	# 06/03/03 - Siggi - make_call_string is echoed without '' to
	27	# file LAST_MAKE_CALL (otherwise error on NEC, because
	28	# '' are part of compiler options
	29	# 16/03/03 - Siggi - Two underscores are placed in front of every define
	30	# string, in case that palm.f90 version contains
	31	# such strings
	32	# 16/04/03 - Siggi - First extensions for linux machines
	33	# 24/06/03 - Siggi - host orkan included
	34	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
	35	# 24/07/03 - Siggi - host maestro admitted
	36	# 06/08/03 - Siggi - host gregale admitted
	37	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
	38	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
	39	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
	40	# (-D$OMP=OMP) in order to avoid problems with
	41	# OMP_NUM_THREADS
	42	# 09/01/04 - Siggi - action above cancelled
	43	# 28/01/04 - Siggi - action above re-cancelled
	44	# 08/03/04 - Siggi - host scirocco admitted
	45	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
	46	# the respective .f90 file is not listed in the makefile
	47	# and deletion is demanded by the user
	48	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
	49	# due to error in ssh installation (otherwise a prompt
	50	# for the password appears)
	51	# 23/07/04 - Siggi - changes due to the new berni configuration
	52	# (federation switch)
	53	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
	54	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
	55	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
	56	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
	57	# 24/04/05 - Siggi - netcdf support on lcmuk
	58	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
	59	# 12/05/05 - Siggi - netcdf support on ibm
	60	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
	61	# 18/05/05 - Siggi - netcdf support on nec
	62	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
	63	# 23/05/05 - Siggi - netcdf support on ibms
	64	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
	65	# 30/06/05 - Siggi - netcdf support on bora
	66	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
	67	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
	68	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
	69	# host gfdl5 (ibmy) admitted
	70	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
	71	# 20/01/06 - Siggi - cpp directive for ibmy
	72	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
	73	# 10/02/06 - Siggi - modifications for scp on decalpha
	74	# 13/04/06 - Siggi - ostria admitted
	75	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
	76	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
	77	# 29/05/05 - Siggi - atmos (lcide) admitted
	78	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
	79	# 24/11/06 - Siggi - breva and levanto admitted
	80	# 07/02/07 - Siggi - adapted for RIAM (neck)
[5]	81	# 10/02/07 - Siggi - all hpmuk-related code removed
[40]	82	# 02/03/07 - Siggi - compilation of utility programs and transfer of
[27]	83	# scripts to remote hosts added (option -u)
[66]	84	# 14/03/07 - Siggi - fimm admitted, revision number added to terminal
	85	# output
[69]	86	# 16/03/07 - Siggi - adjustments (netcdf) for lctit
	87	# adjustments for running under pdksh, local ip-addres
	88	# is not determined any more
[82]	89	# 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
	90	# from configuration file
	91	# host identifier (local_host) is read from config file
[116]	92	# 10/10/07 - Siggi - bugfix: handling of comment lines
[181]	93	# 18/07/08 - Siggi - adapted for lcsgih
	94	# 21/07/08 - Siggi - mainprog (executable) is added to the tar-file
	95	# ({mainprog}_current_version)
[206]	96	# 02/10/08 - Siggi - adapted for lcxt4
[215]	97	# 14/11/08 - Siggi - update mechanism completely revised: source tarfile
	98	# remains in source directory, one depository per block
[266]	99	# (given in the config-file) is created, allways all
	100	# files from the source directory are copied to the
	101	# respective depository, no additional file checks are
	102	# done any more (version 2.1)
[224]	103	# 13/01/09 - Marcus- re-enable compilation more than once on lcmuk (as on
	104	# other machines)
[266]	105	# 21/03/09 - Siggi - -u copies also copies process_dvr_output and
	106	# .dvrserver.config
[305]	107	# 21/04/09 - Siggi - adjustments for new IBM at DKRZ, which is now ibmh
[367]	108	# 25/08/09 - BjornM- adapted for lck
[407]	109	# 01/12/09 - BjornM- re-adjustments for lcxt4
[1]	110
	111
	112
	113	# VARIABLENVEREINBARUNGEN + DEFAULTWERTE
[22]	114	compile_utility_programs=false
[1]	115	config_file=.mrun.config
[67]	116	fimm=false
[1]	117	host=all
	118	host_found=false
	119	locat=normal
	120	makefile=""
	121	remote_mode=interactive
	122	scirocco=false
	123	silent=false
	124	suf=f90
	125	update=false
[83]	126	working_directory=`pwd`
[1]	127
	128	typeset -i ih ihost=0
	129
[66]	130	typeset -R30 calltime
[1]	131	typeset -L20 column1
	132	typeset -L50 column2
	133	typeset -L70 column3
[215]	134	typeset -L40 version="MBUILD 2.1 Rev$Rev: 407 $"
[1]	135
	136	# FEHLERBEHANDLUNG
	137	# BEI EXIT:
[83]	138	trap 'rm -rf $working_directory/tmp_mbuild
[69]	139	if [[ $locat != normal ]]
[1]	140	then
	141	printf "\n\n +++ mbuild killed \n\n"
	142	else
	143	printf "\n\n *** mbuild finished \n\n"
	144	fi' exit
	145
	146
	147	# BEI TERMINAL-BREAK:
[83]	148	trap 'rm -rf $working_directory/tmp_mbuild
[69]	149	printf "\n\n +++ mbuild killed by \"^C\" \n\n"
[1]	150	exit
	151	' 2
	152
	153
[215]	154	tmp_mbuild=${working_directory}/tmp_mbuild
[1]	155
	156	# SHELLSCRIPT-OPTIONEN EINLESEN
[22]	157	while getopts :c:h:m:rs:u option
[1]	158	do
	159	case $option in
	160	(c) config_file=$OPTARG;;
	161	(h) host=$OPTARG;;
	162	(m) makefile=$OPTARG;;
	163	(r) remote_mode=batch;;
	164	(s) suf=$OPTARG;;
[22]	165	(u) compile_utility_programs=true;;
[1]	166	(\?) printf "\n +++ unknown option $OPTARG \n";
	167	locat=parameter; exit;;
	168	esac
	169	done
	170
	171
	172
	173	# BATCH-MODE IST ZUR ZEIT NICHT FUNKTIONSFAEHIG
	174	if [[ $remote_mode = batch ]]
	175	then
	176	printf "\n +++ sorry, batch mode does not work! \n"
	177	locat=parameter; exit
	178	fi
	179
	180
	181
[82]	182	# PRUEFEN, OB KONFIGURATIONS-DATEI VORHANDEN
	183	if [[ ! -f $config_file ]]
	184	then
	185	printf "\n +++ configuration file: "
	186	printf "\n $config_file"
	187	printf "\n does not exist"
	188	locat=configuration; exit
	189	fi
	190
	191
	192
[1]	193	# LOKALEN RECHNER ERMITTELN
	194	local_host_real_name=$(hostname)
[69]	195	# local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
	196
[1]	197
[82]	198
	199	# HOST-IDENTIFIER (local_host) AUS KONFIGURATIONSDATEI BESTIMMEN
	200	line=""
[215]	201	grep "%host_identifier" $config_file > $tmp_mbuild
[82]	202	while read line
	203	do
[116]	204	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
[82]	205	then
	206	HOSTNAME=`echo $line \| cut -d" " -s -f2`
	207	host_identifier=`echo $line \| cut -d" " -s -f3`
[83]	208	if [[ $local_host_real_name = $HOSTNAME ]]
[82]	209	then
	210	local_host=$host_identifier
	211	break
	212	fi
	213	fi
[215]	214	done < $tmp_mbuild
[82]	215
	216	if [[ "$local_host" = "" ]]
	217	then
	218	printf "\n +++ no host identifier found in configuration file \"$config_file\""
	219	printf "\n for local host \"$local_host_real_name\"."
	220	printf "\n Please add line"
	221	printf "\n \"\%host_identifier $local_host_real_name <identifier>\""
	222	printf "\n to the configuration file."
	223	locat=local_host; exit
	224	fi
	225
	226
	227
[1]	228	[[ $local_host_real_name = scirocco ]] && scirocco=true
[67]	229	[[ $local_host_real_name = fimm.bccs.uib.no ]] && fimm=true
[1]	230
	231
	232
	233	if [[ $local_host != ibms ]]
	234	then
	235	config_file=$PWD/$config_file
	236	else
	237	config_file=`pwd`/$config_file
	238	fi
	239
	240
	241
	242	# BENUTZERNAMEN AUF LOKALEM RECHNER AUS KONFIGURATIONSDATEI ERMITTELN
	243	line=""
[215]	244	grep " $local_host" $config_file \| grep "%remote_username" > $tmp_mbuild
[69]	245	while read line
[1]	246	do
[116]	247	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
[1]	248	then
	249	local_username=`echo $line \| cut -d" " -s -f2`
	250	fi
[215]	251	done < $tmp_mbuild
[1]	252
[82]	253
[1]	254	if [[ "$local_username" = "" ]]
	255	then
	256	printf "\n +++ no user name found in configuration file"
	257	printf "\n for local host \"$local_host\" "
	258	locat=config_file; exit
	259	fi
	260
	261
[5]	262	# LOKALEN QUELLTEXTPFAD ERMITTELN.
	263	# ZUERST PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD FUER ALLE RECHNER
	264	# VEREINBART WURDE.
	265	# DAZU ZUNAECHST ALLE IN DER KONFIGURATIONSDATEI VEREINBARTEN GLOBALEN
	266	# VARIABLEN SETZEN, WEIL DIESE EVTL. IN PFADNAMEN VERWENDET WERDEN
	267	line=""
[215]	268	grep "%" $config_file > $tmp_mbuild
[69]	269	while read line
[5]	270	do
[116]	271	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" && $(echo $line \| cut -c1) != "#" ]]
[1]	272	then
[5]	273	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
	274	value=`echo $line \| cut -d" " -s -f2`
[8]	275	eval export $var=\$value
[9]	276	# eval echo \" $var=\$$var \" # AUSGABE ZU TESTZWECKEN
[1]	277	fi
[215]	278	done < $tmp_mbuild
[1]	279
[5]	280	# NUN PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD VEREINBART WURDE
[1]	281	line=""
[215]	282	grep "%source_path" $config_file > $tmp_mbuild
[69]	283	while read line
[1]	284	do
	285	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	286	then
	287	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
	288	then
	289	global_source_path=`echo $line \| cut -d" " -s -f2`
	290	fi
	291	fi
[215]	292	done < $tmp_mbuild
[1]	293
	294	line=""
[215]	295	grep " $local_host" $config_file \| grep "%source_path" > $tmp_mbuild
[69]	296	while read line
[1]	297	do
	298	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	299	then
	300	local_source_path=`echo $line \| cut -d" " -s -f2`
	301	fi
[215]	302	done < $tmp_mbuild
[1]	303
	304	if [[ "$local_source_path" = "" ]]
	305	then
	306	if [[ "$global_source_path" != "" ]]
	307	then
	308	local_source_path=$global_source_path
	309	else
	310	printf "\n +++ no source path found in configuration file"
	311	printf "\n for local host \"$local_host\" "
	312	printf "\n please set \"\%source_path\" in configuration file"
	313	locat=config_file; exit
	314	fi
	315	fi
	316	eval local_source_path=$local_source_path
[8]	317	eval local_source_path=$local_source_path
[1]	318
	319
[215]	320
	321	# GLOBALEN DEPOSITORY-PFAD ERMITTELN
[1]	322	line=""
[215]	323	grep "%depository_path" $config_file > $tmp_mbuild
[69]	324	while read line
[1]	325	do
	326	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	327	then
	328	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
	329	then
	330	global_depository_path=`echo $line \| cut -d" " -s -f2`
	331	fi
	332	fi
[215]	333	done < $tmp_mbuild
[1]	334
	335
	336
[5]	337	# PRUEFEN, OB IN KONFIGURATIONSDATEI EIN HAUPTPROGRAMM
	338	# VEREINBART WURDE
	339	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
	340	then
	341	printf "\n +++ no main program or more than one main program defined"
	342	printf "\n in configuration file"
	343	locat=configuration; exit
	344	else
	345	line=`grep "%mainprog" $config_file`
	346	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
	347	then
	348	printf "\n +++ no main program defined in configuration file"
	349	locat=configuration; exit
	350	fi
	351	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
	352	fi
	353
	354
	355
[1]	356	# MAKEFILE vorhanden
	357	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
	358	if [[ ! -f $makefile ]]
	359	then
	360	printf "\n +++ makefile: "
	361	printf "\n $makefile"
	362	printf "\n does not exist"
	363	locat=makefile; exit
	364	fi
	365
	366
	367	# HEADER-AUSGABE (TEIL1: MELDUNGEN UEBER LOKALEN RECHNER)
	368	calltime=$(date)
	369	printf "\n"
	370	printf "#------------------------------------------------------------------------# \n"
	371	printf "\| $version$calltime \| \n"
	372	printf "\| \| \n"
	373	column1="called on:"; column2=$local_host_real_name
	374	printf "\| $column1$column2 \| \n"
	375	column1="local username:"; column2=$local_username
	376	printf "\| $column1$column2 \| \n"
	377	column1="local IP-addres:"; column2=$local_addres
	378	printf "\| $column1$column2 \| \n"
	379	column1="config file:"; column2=$config_file
	380	printf "\| $column1$column2 \| \n"
	381	column1="makefile:"; column2=$makefile
	382	printf "\| $column1$column2 \| \n"
	383	column1="local source path:"; column2=$local_source_path
	384	printf "\| $column1$column2 \| \n"
	385	printf "#------------------------------------------------------------------------# \n"
	386
	387	# printf "\| \| \n"
	388
	389
[40]	390	if [[ $compile_utility_programs = false ]]
	391	then
[1]	392
[40]	393	# IN JEDEM FALL ALLEN DATEIEN WRITE-PERMIT GEBEN, DAMIT ES AUF
	394	# DEN REMOTE-RECHNERN NICHT EVTL. ZU PROBLEMEN BEIM UEBERSCHREIBEN KOMMT
[215]	395	cd $local_source_path
	396	printf "\n\n *** tar of makefile and source files in $local_source_path"
[40]	397	tar -cf ${mainprog}_sources.tar Makefile *.$suf
	398	printf "\n"
[1]	399
[40]	400	fi
[1]	401
	402
[40]	403
[1]	404	# BESTAETIGUNG ZUM WEITERMACHEN EINHOLEN
	405	if [[ $host = all ]]
	406	then
	407	printf "\n *** updates will be made for ALL hosts found in"
	408	printf "\n the configuration file"
	409	else
	410	printf "\n *** update will be made for host \"$host\" "
	411	fi
	412
	413	if [[ $silent = false ]]
	414	then
	415	answer=dummy
	416	printf "\n\n"
	417	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
	418	do
	419	printf " >>> continue (y/n) ? "
	420	read answer
	421	done
	422	if [[ $answer = n \|\| $answer = N ]]
	423	then
	424	locat=user_abort; exit
	425	fi
	426	fi
	427
	428
	429
	430
	431	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
	432	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
	433	printf "\n *** scanning configuration file for host(s) ..."
	434
[215]	435	grep %fopts $config_file > $tmp_mbuild
[69]	436	while read line
[1]	437	do
	438	# KOMMENTARZEILEN UEBERSPRINGEN
	439	[[ $(echo $line \| cut -c1) = "#" ]] && continue
	440	(( ihost = ihost + 1 ))
	441	hostline[$ihost]="$line"
[215]	442	done < $tmp_mbuild
[1]	443
	444
	445	while (( ih < ihost ))
	446	do
	447
	448	(( ih = ih + 1 ))
	449
	450	# REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
	451	# NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
	452	# SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
	453	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
	454	remote_host=`echo $remote_host_string \| cut -d" " -f1`
	455	if [[ $host != all ]]
	456	then
	457	[[ $remote_host != $host ]] && continue
	458	fi
	459	host_found=true
	460	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
	461	if [[ $condition1 = $remote_host ]]
	462	then
	463	condition1=""
	464	else
	465	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
	466	fi
	467
[82]	468	netcdf_inc=""
	469	netcdf_lib=""
[1]	470
	471	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
	472	case $remote_host in
[116]	473	(lcmuk) remote_addres=130.75.105.2;;
[181]	474	(lcsgib) remote_addres=130.73.232.102;;
[346]	475	(lcsgih) remote_addres=130.75.4.102;;
[367]	476	(lck) remote_addres=165.132.26.61;;
[83]	477	(lctit) remote_addres=172.17.75.161;;
[206]	478	(lcxt4) remote_addres=129.177.20.113;;
[83]	479	(decalpha) remote_addres=165.132.26.56;;
[305]	480	(ibmh) remote_addres=136.172.40.15;;
[83]	481	(ibms) remote_addres=150.183.5.101;;
	482	(ibmy) remote_addres=165.132.26.58;;
	483	(nech) remote_addres=136.172.44.192;;
	484	(neck) remote_addres=133.5.178.11;;
	485	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
	486	(*) if [[ $local_host != $remote_host ]]
[1]	487	then
[83]	488	printf "\n +++ remote host \"$remote_host\" unknown";
	489	printf "\n please inform S. Raasch!"
[1]	490	fi;;
	491	esac
	492
	493
	494	# REMOTE-USERNAMEN ERMITTELN
	495	line=""
[116]	496	found=false
[215]	497	grep "$remote_host_string" $config_file \| grep "%remote_username" > $tmp_mbuild
[69]	498	while read line1
[1]	499	do
[116]	500
[1]	501	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	502	then
	503	line="$line1"
	504	fi
[116]	505
	506	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	507	then
	508	remote_username=`echo $line \| cut -d" " -s -f2`
	509	found=true
	510	fi
	511
[215]	512	done < $tmp_mbuild
[1]	513
[116]	514	if [[ $found = false ]]
[1]	515	then
	516	printf "\n +++ no remote username found in configuration file"
	517	printf "\n for \"$remote_host_string\" "
	518	locat=config_file; exit
	519	fi
	520
	521
	522	# REMOTE-QUELLTEXTPFAD ERMITTELN
	523	line=""
[54]	524	remote_source_path=""
[215]	525	grep "$remote_host_string" $config_file \| grep "%source_path" > $tmp_mbuild
[69]	526	while read line1
[1]	527	do
[116]	528
[1]	529	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	530	then
	531	line="$line1"
	532	fi
[116]	533
	534	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	535	then
	536	remote_source_path=`echo $line \| cut -d" " -s -f2`
	537	fi
	538
[215]	539	done < $tmp_mbuild
[1]	540
	541	if [[ "$remote_source_path" = "" ]]
	542	then
	543	if [[ "$global_source_path" != "" ]]
	544	then
	545	remote_source_path=$global_source_path
	546	else
	547	printf "\n +++ no source path found in configuration file"
	548	printf "\n for \"$remote_host_string\" "
	549	locat=config_file; exit
	550	fi
	551	fi
	552
[22]	553	remote_ud=${remote_source_path}/../UTIL
[24]	554	remote_ud=$(eval echo $remote_ud)
[1]	555
[54]	556
[1]	557	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
[54]	558	remote_md=""
[1]	559	line=""
[215]	560	grep "$remote_host_string" $config_file \| grep "%depository_path" > $tmp_mbuild
[69]	561	while read line1
[1]	562	do
[116]	563
[1]	564	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	565	then
	566	line="$line1"
	567	fi
[116]	568
	569	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	570	then
	571	remote_md=`echo $line \| cut -d" " -s -f2`
	572	fi
	573
[215]	574	done < $tmp_mbuild
[1]	575
	576	if [[ "$remote_md" = "" ]]
	577	then
	578	if [[ "$global_depository_path" != "" ]]
	579	then
	580	remote_md=$global_depository_path
	581	else
	582	printf "\n +++ no depository path found in configuration file"
	583	printf "\n for \"$remote_host_string\" "
	584	printf "\n please set \"\%depository_path\" in configuration file"
	585	locat=config_file; exit
	586	fi
	587	fi
	588
[8]	589	remote_md=$(eval echo $remote_md)
[215]	590	[[ "$condition1" != "" ]] && remote_md=${remote_md}_$condition1
	591	[[ "$condition2" != "" ]] && remote_md=${remote_md}_$condition2
[1]	592
[8]	593
[1]	594	# COMPILERNAMEN ERMITTELN
	595	line=""
[116]	596	found=false
[215]	597	grep "$remote_host_string" $config_file \| grep "%compiler_name " > $tmp_mbuild
[69]	598	while read line1
[1]	599	do
[116]	600
[1]	601	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	602	then
	603	line="$line1"
	604	fi
[116]	605
	606	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	607	then
	608	compiler_name=`echo $line \| cut -d" " -s -f2`
	609	found=true
	610	fi
	611
[215]	612	done < $tmp_mbuild
[1]	613
[116]	614	if [[ $found = false ]]
[1]	615	then
	616	printf "\n +++ no compiler name found in configuration file"
	617	printf "\n for \"$remote_host_string\" "
	618	locat=config_file; exit
	619	fi
	620
	621
[27]	622	# BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
	623	# SERIELLER COMPILERNAME ERMITTELT WERDEN
	624	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
	625	then
	626	line=""
[116]	627	found=false
[215]	628	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" > $tmp_mbuild
[69]	629	while read line1
[27]	630	do
[116]	631
[27]	632	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	633	then
	634	line="$line1"
	635	fi
[116]	636
	637	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	638	then
	639	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
	640	found=true
	641	fi
	642
[215]	643	done < $tmp_mbuild
[1]	644
[116]	645	if [[ $found = false ]]
[27]	646	then
[28]	647	printf "\n +++ no serial compiler name found in configuration file"
[27]	648	printf "\n for \"$remote_host_string\" "
	649	locat=config_file; exit
	650	fi
	651	else
	652	compiler_name_ser=$compiler_name
	653	fi
	654
	655
	656
[82]	657	# PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
	658	line=""
[116]	659	found=false
[215]	660	grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
[82]	661	while read line1
	662	do
[116]	663
[82]	664	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	665	then
	666	line="$line1"
	667	fi
[116]	668
	669	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	670	then
	671	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	672	cpp_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	673	found=true
	674	fi
	675
[215]	676	done < $tmp_mbuild
[116]	677
	678	if [[ $found = false ]]
[82]	679	then
	680	printf "\n +++ no preprocessor options found in configuration file"
	681	printf "\n for \"$remote_host_string\" "
	682	locat=config_file; exit
	683	fi
	684
[116]	685
[82]	686	# RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
	687	for string in $remote_host_string
	688	do
	689	if [[ $(echo $remote_host \| cut -c1-2) = lc && $(echo $string \| cut -c1-2) = lc ]]
	690	then
	691	cpp_options="$cpp_options -D__lc "
[83]	692	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $(echo $string \| cut -c1-3) = ibm ]]
	693	then
	694	cpp_options="${cpp_options},-D__ibm"
	695	elif [[ $(echo $remote_host \| cut -c1-3) = nec && $(echo $string \| cut -c1-3) = nec ]]
	696	then
	697	cpp_options="${cpp_options} -D__nec"
[82]	698	else
[83]	699	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
	700	then
	701	cpp_options="${cpp_options},-D__$string"
	702	else
	703	cpp_options="$cpp_options -D__$string "
	704	fi
[82]	705	fi
	706	done
	707
	708
	709
	710	# NETCDF-OPTIONEN ERMITTELN
	711	line=""
[215]	712	grep "$remote_host_string" $config_file \| grep "%netcdf_inc" > $tmp_mbuild
[82]	713	while read line1
	714	do
[116]	715
[82]	716	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	717	then
	718	line="$line1"
	719	fi
[116]	720
	721	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	722	then
	723	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	724	netcdf_inc=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	725	fi
	726
[215]	727	done < $tmp_mbuild
[82]	728
	729	line=""
[215]	730	grep "$remote_host_string" $config_file \| grep "%netcdf_lib" > $tmp_mbuild
[82]	731	while read line1
	732	do
[116]	733
[82]	734	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	735	then
	736	line="$line1"
	737	fi
[116]	738
	739	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	740	then
	741	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	742	netcdf_lib=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	743	fi
	744
[215]	745	done < $tmp_mbuild
[82]	746
	747
	748
[1]	749	# COMPILEROPTIONEN ERMITTELN
	750	line=""
[116]	751	found=false
[215]	752	grep "$remote_host_string" $config_file \| grep "%fopts" > $tmp_mbuild
[69]	753	while read line1
[1]	754	do
[116]	755
[1]	756	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	757	then
	758	line="$line1"
	759	fi
[116]	760
	761	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	762	then
	763	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	764	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	765	found=true
	766
	767	# NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
	768	compiler_options="$compiler_options $netcdf_inc"
	769	fi
	770
[215]	771	done < $tmp_mbuild
[116]	772
	773	if [[ $found = false ]]
[1]	774	then
	775	printf "\n +++ no compiler options found in configuration file"
	776	printf "\n for \"$remote_host_string\" "
	777	locat=config_file; exit
	778	fi
[82]	779
[1]	780
	781
[221]	782	# MPI LIBRARY ERMITTELN
	783	line=""
	784	found=false
	785	grep "$remote_host_string" $config_file \| grep "%mpilib" > $tmp_mbuild
	786	while read line1
	787	do
	788
	789	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	790	then
	791	line="$line1"
	792	fi
	793
	794	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	795	then
	796	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	797	mpilib=`echo $line \| cut -d" " -s -f2`
	798	found=true
	799	fi
	800
	801	done < $tmp_mbuild
	802
	803	[[ $found = false ]] && mpilib=mpt
	804
	805
	806
	807
[1]	808	# LADER-OPTIONEN ERMITTELN
	809	line=""
[116]	810	found=false
[215]	811	grep "$remote_host_string" $config_file \| grep "%lopts" > $tmp_mbuild
[69]	812	while read line1
[1]	813	do
[116]	814
[1]	815	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	816	then
	817	line="$line1"
	818	fi
[116]	819
	820	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	821	then
	822	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	823	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	824	found=true
	825
	826	# NETCDF-LIBRARY HINZUFUEGEN
	827	loader_options="$loader_options $netcdf_lib"
	828	fi
	829
[215]	830	done < $tmp_mbuild
[1]	831
[116]	832	if [[ $found = false ]]
[1]	833	then
	834	printf "\n +++ no loader options found in configuration file"
	835	printf "\n for \"$remote_host_string\" "
	836	locat=config_file; exit
	837	fi
[82]	838
[1]	839
	840	printf "\n\n#------------------------------------------------------------------------# \n"
	841	if [[ $remote_host = $local_host ]]
	842	then
	843	column1="remote_host:"; column2="$remote_host (= local host!)"
	844	else
	845	column1="remote_host:"; column2=$remote_host
	846	fi
	847	printf "\| $column1$column2 \| \n"
	848	printf "\| \| \n"
	849	column1="conditions:"; column2="$condition1 $condition2"
	850	printf "\| $column1$column2 \| \n"
	851	column1="make depository:"; column2=$remote_md
	852	printf "\| $column1$column2 \| \n"
[215]	853	line=$(echo "$remote_md" \| cut -c51-)
	854	while [[ "$line" != "" ]]
	855	do
	856	column1=""
	857	column2=$line
	858	printf "\| $column1$column2 \| \n"
	859	line=$(echo "$line" \| cut -c51-)
	860	done
[25]	861	if [[ $compile_utility_programs = true ]]
	862	then
	863	column1="utility directory:"; column2=$remote_ud
	864	printf "\| $column1$column2 \| \n"
	865	fi
[1]	866	column1="username:"; column2=$remote_username
	867	printf "\| $column1$column2 \| \n"
	868	column1="addres:"; column2=$remote_addres
	869	printf "\| $column1$column2 \| \n"
	870	column1="compiler:"; column2=$compiler_name
	871	printf "\| $column1$column2 \| \n"
[28]	872	if [[ $compile_utility_programs = true ]]
	873	then
	874	column1="serial compiler:"; column2=$compiler_name_ser
	875	printf "\| $column1$column2 \| \n"
	876	fi
[1]	877	column1="cpp options:"; column2=$cpp_options
	878	printf "\| $column1$column2 \| \n"
	879	line=$(echo "$cpp_options" \| cut -c51-)
	880	while [[ "$line" != "" ]]
	881	do
	882	column1=""
	883	column2=$line
	884	printf "\| $column1$column2 \| \n"
	885	line=$(echo "$line" \| cut -c51-)
	886	done
	887	column1="compiler options:"; column2=$compiler_options
	888	printf "\| $column1$column2 \| \n"
	889	line=$(echo "$compiler_options" \| cut -c51-)
	890	while [[ "$line" != "" ]]
	891	do
	892	column1=""
	893	column2=$line
	894	printf "\| $column1$column2 \| \n"
	895	line=$(echo "$line" \| cut -c51-)
	896	done
[221]	897	if [[ $( echo $remote_host \| cut -c1-5 ) = lcsgi ]]
	898	then
	899	column1="mpi library:"; column2=$mpilib
	900	printf "\| $column1$column2 \| \n"
	901	fi
[1]	902	column1="loader options:"; column2=$loader_options
	903	printf "\| $column1$column2 \| \n"
	904	line=$(echo "$loader_options" \| cut -c51-)
	905	while [[ "$line" != "" ]]
	906	do
	907	column1=""
	908	column2=$line
	909	printf "\| $column1$column2 \| \n"
	910	line=$(echo "$line" \| cut -c51-)
	911	done
	912	printf "#------------------------------------------------------------------------# \n"
	913
	914	if [[ $silent = false ]]
	915	then
	916	answer=dummy
	917	printf "\n\n"
	918	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
	919	do
	920	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
	921	read answer
	922	done
	923	if [[ $answer = a \|\| $answer = A ]]
	924	then
	925	locat=user_abort; exit
	926	fi
	927	if [[ $answer = c \|\| $answer = C ]]
	928	then
	929	silent=false
	930	fi
	931	if [[ $answer = s \|\| $answer = S ]]
	932	then
	933	continue
	934	fi
	935	fi
	936
	937
	938	if [[ $remote_mode = batch ]]
	939	then
	940
	941	# BATCH-JOB PARAMETER SETZEN
	942	case $remote_host in
	943	(t3eb) queue=berte; memory=60; cputime=1000; xoption="-X 0";;
	944	(t3eh) queue=comp_t3e; memory=60; cputime=360;;
	945	(t3ej2) queue=normal; memory=60; cputime=1000; xoption="-X 0";;
[5]	946	(t3ej5\|ground.yonsei.ac.kr) printf "\n --- remote host \"$remote_host\" does not allow batch jobs"; continue;;
[1]	947	esac
	948
	949
	950	# BATCH-JOB ZUSAMMENSTELLEN
	951	printf "\n *** creating batch-job for remote host"
	952	echo " " > mbuild_job
	953
	954	# AUF CRAY-RECHNERN IN JUELICH WIRD KEIN BENUTZER-PROFILE AUSGEFUEHRT
	955	# DIES WIRD HIER GETAN, UM PFADE USW. ZU SETZEN
	956	if [[ $remote_host = t3ej2 ]]
	957	then
	958	echo "set +vx" >> mbuild_job
	959	echo ". .profile" >> mbuild_job
	960	echo "set -x" >> mbuild_job
	961	fi
	962
	963	# AUF CRAY-RECHNERN GELADENE MODULE AUFLISTEN
	964	if [[ $host = t3eb \|\| $host = t3eh \|\| $host = t3ej2 ]]
	965	then
	966	echo "module list" >> mbuild_job
	967	fi
	968
	969
	970	# WECHSEL IN TEMPORAERES VERZEICHNIS
	971	echo "cd ${remote_md}" >> mbuild_job
	972
	973
	974	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	975	echo "scp ${local_username}@${local_addres}:~/modell/code_3dp/palm_current_version/${mainprog}_sources.tar ${mainprog}_sources.tar" >> mbuild_job
	976	# echo "[[ \$? != 0 ]] && (echo "+++ scp failed"; exit)" >> mbuild_job
	977
	978
	979	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
	980	echo "[[ -f ${mainprog}_current_version.tar ]] && tar -xvf ${mainprog}_current_version.tar" >> mbuild_job
	981
	982
	983	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
	984	echo "tar -xvf ${mainprog}_sources.tar" >> mbuild_job
	985
	986
	987	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	988	echo "make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " >> mbuild_job
	989	echo "chmod u+w *" >> mbuild_job
	990
	991	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
	992	echo "tar -cvf ${mainprog}_current_version.tar .f90 .o" >> mbuild_job
	993
	994
	995	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
	996	echo "make clean" >> mbuild_job
	997	echo "rm ${mainprog}_sources.tar" >> mbuild_job
	998	echo "rm *.f90 Makefile" >> mbuild_job
	999
	1000
	1001
	1002	# JOB MITTELS SUBJOB STARTEN
	1003	printf "\n *** sending batch job to remote host"
	1004	# subjob $xoption -h $remote_host -q $queue -m $memory -t $cputime -v mbuild_job
	1005
	1006
	1007	# JOBFILE LOESCHEN
	1008	# rm aljob
	1009
	1010	else
	1011
	1012	if [[ $remote_host != $local_host ]]
	1013	then
	1014
[40]	1015	if [[ $compile_utility_programs = false ]]
[1]	1016	then
	1017
[40]	1018	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	1019	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
	1020	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
	1021	if [[ $remote_host != lctit ]]
	1022	then
	1023	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
	1024	else
[206]	1025	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
[40]	1026	# MIT SSH, DESHALB AUFRUF PER PIPE
	1027	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
	1028	fi
	1029	if [[ $local_host = decalpha ]]
	1030	then
[206]	1031	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
[40]	1032	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1033	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1034	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
[215]	1035	/bin/scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
[40]	1036	else
[215]	1037	scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
[40]	1038	fi
[1]	1039
	1040
	1041
[40]	1042	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
	1043	echo " *** untar previous update on remote host, if existing"
	1044	if [[ $remote_host != lctit ]]
	1045	then
	1046	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
	1047	else
[206]	1048	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
[40]	1049	# MIT SSH, DESHALB AUFRUF PER PIPE
	1050	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
	1051	fi
[1]	1052
	1053
[40]	1054	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
	1055	echo " *** untar actual sources on remote host"
	1056	if [[ $remote_host != lctit ]]
	1057	then
	1058	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
	1059	else
[206]	1060	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
[40]	1061	# MIT SSH, DESHALB AUFRUF PER PIPE
	1062	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
	1063	fi
[1]	1064
	1065
[40]	1066	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1067	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
	1068	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
	1069	# Z.B. DIE PFADE ZUM COMPILER)
	1070	echo " *** execute \"make\" on remote host"
[1]	1071
[40]	1072	if [[ $remote_host = nech ]]
	1073	then
	1074	make_call_string="sxmake PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1075	else
	1076	make_call_string="make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1077	fi
	1078
	1079	if [[ $remote_host = t3eh ]]
	1080	then
[1]	1081
[40]	1082	print "xterm\nexit\n cd ${remote_md}; make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1083
[40]	1084	elif [[ $remote_host = t3ej2 \|\| $remote_host = ibms \|\| $remote_host = ibmy ]]
	1085	then
[1]	1086
[40]	1087	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1088
[305]	1089	elif [[ $remote_host = ibmh ]]
[40]	1090	then
[1]	1091
[40]	1092	print "export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1093
[181]	1094	elif [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
	1095	then
	1096
[366]	1097	print ". /usr/share/modules/init/bash; module load ifort/11.0.069; module load $mpilib; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[196]	1098	# print ". /usr/share/modules/init/bash; module load mvapich2/1.2rc1-intel; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1099	# print ". /usr/share/modules/init/bash; module load mvapich2; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[181]	1100
[40]	1101	elif [[ $remote_host = lctit ]]
	1102	then
[1]	1103
[40]	1104	echo " " > ${remote_host}_last_make_protokoll
	1105	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
	1106	do
	1107	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1108	done
[1]	1109
[206]	1110	elif [[ $remote_host = lcxt4 ]]
	1111	then
	1112
[407]	1113	print ". /opt/modules/default/init/ksh; module load Base-opts/2.1.56HDA; module load modules/3.1.6; module load pgi/9.0.4; module load PrgEnv-pgi/2.1.56HDA; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[206]	1114
[40]	1115	else
[1]	1116
[40]	1117	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1118
[40]	1119	fi
[1]	1120
[40]	1121	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
[1]	1122	then
[40]	1123	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
	1124	if [[ $silent = false ]]
	1125	then
	1126	answer=dummy
	1127	printf "\n"
	1128	while [[ "$answer" != c && "$answer" != k ]]
	1129	do
	1130	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
	1131	read answer
	1132	if [[ "$answer" = l ]]
	1133	then
	1134	more ${remote_host}_last_make_protokoll
	1135	fi
	1136	done
	1137	if [[ $answer = k ]]
[1]	1138	then
[40]	1139	locat=user_abort; exit
[1]	1140	fi
	1141	fi
	1142	fi
	1143
	1144
	1145
[40]	1146	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
	1147	printf "\n *** tar update on remote host ..."
	1148	if [[ $remote_host != lctit ]]
	1149	then
[181]	1150	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod"
[40]	1151	else
[206]	1152	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
[40]	1153	# MIT SSH, DESHALB AUFRUF PER PIPE
[181]	1154	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
[40]	1155	fi
[1]	1156
	1157
[40]	1158	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
	1159	# printf "\n *** \"make clean\" on remote host ..."
	1160	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
	1161	# printf "\n"
[1]	1162
	1163
[25]	1164
	1165
[22]	1166	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
	1167	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	1168	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
[40]	1169	elif [[ $compile_utility_programs = true ]]
[22]	1170	then
	1171
[24]	1172	printf "\n\n"
[27]	1173	echo " *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
	1174	cd ${local_source_path}/../SCRIPTS
[22]	1175
	1176	if [[ $remote_host != lctit ]]
	1177	then
[24]	1178	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
[22]	1179	else
[206]	1180	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
[22]	1181	# MIT SSH, DESHALB AUFRUF PER PIPE
[24]	1182	print "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_addres} 2>&1
[22]	1183	fi
	1184
[27]	1185	# KOPIEREN DER SCRIPTE
[22]	1186	if [[ $local_host = decalpha ]]
	1187	then
[206]	1188	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
[22]	1189	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1190	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1191	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
[266]	1192	/bin/scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
[27]	1193	else
[266]	1194	scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
[27]	1195	fi
	1196
	1197	cd - > /dev/null
	1198	cd ${local_source_path}/../UTIL
	1199
	1200
	1201	# KOPIEREN DER UTILITY-PROGRAMME
	1202	if [[ $local_host = decalpha ]]
	1203	then
[206]	1204	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
[27]	1205	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1206	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1207	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
[24]	1208	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
[22]	1209	else
[24]	1210	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
[22]	1211	fi
	1212
	1213
	1214
	1215	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1216	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
	1217	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
	1218	# Z.B. DIE PFADE ZUM COMPILER)
	1219	echo " *** execute \"make\" on remote host"
	1220
	1221	if [[ $remote_host = nech ]]
	1222	then
[27]	1223	make_call_string="sxmake F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
[22]	1224	else
[27]	1225	make_call_string="make F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
[22]	1226	fi
	1227
	1228	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
	1229	then
	1230
[25]	1231	ssh ${remote_username}@${remote_addres} "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
[22]	1232
[305]	1233	elif [[ $remote_host = ibmh ]]
[22]	1234	then
	1235
[25]	1236	print "export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres}
[22]	1237
	1238	elif [[ $remote_host = lctit ]]
	1239	then
	1240
	1241	echo " " > ${remote_host}_last_make_protokoll
	1242	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
	1243	do
	1244	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1245	done
	1246
[407]	1247	elif [[ $remote_host = lcxt4 ]]
	1248	then
	1249
	1250	print ". /opt/modules/default/init/ksh; module load Base-opts/2.1.56HDA; module load modules/3.1.6; module load pgi/9.0.4; module load PrgEnv-pgi/2.1.56HDA; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1251
[22]	1252	else
	1253
	1254	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1255
	1256	fi
	1257
	1258	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
	1259
[75]	1260	rm -rf ${remote_host}_last_make_protokoll
[22]	1261
[1]	1262	else
	1263
[40]	1264	if [[ $compile_utility_programs = false ]]
	1265	then
[1]	1266
[215]	1267	# DEPOSITORY VERZEICHNIS ERZEUGEN, FALLS NOCH NICHT VORHANDEN
	1268	eval remote_md=$remote_md
	1269	if [[ ! -d $remote_md ]]
	1270	then
	1271	if mkdir $remote_md
	1272	then
	1273	printf "\n\n *** directory for make depository:"
	1274	printf "\n $remote_md"
	1275	printf "\n was created\n"
	1276	else
	1277	printf "\n +++ directory for make depository:"
	1278	printf "\n $remote_md"
	1279	printf "\n cannot be created"
	1280	locat=local_depository_path; exit
	1281	fi
	1282	fi
	1283
	1284	# QUELLTEXT-DATEIEN AUS REPOSITORY INS DEPOSITORY KOPIEREN
	1285	echo " "
	1286	echo " *** updating sources in $remote_md"
	1287	cd $remote_md
	1288	cp $local_source_path/${mainprog}_sources.tar .
	1289	tar xf ${mainprog}_sources.tar
	1290
[40]	1291	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
	1292	echo " "
	1293	echo " *** execute \"make\" on local host"
[1]	1294
[40]	1295	make PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
	1296
	1297	if [[ $? != 0 ]]
[1]	1298	then
[40]	1299	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
	1300	if [[ $silent = false ]]
	1301	then
	1302	answer=dummy
	1303	printf "\n"
	1304	while [[ "$answer" != c && "$answer" != k ]]
	1305	do
	1306	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
	1307	read answer
	1308	if [[ "$answer" = l ]]
	1309	then
	1310	more ${remote_host}_last_make_protokoll
	1311	fi
	1312	done
	1313	if [[ $answer = k ]]
[1]	1314	then
[40]	1315	locat=user_abort; exit
[1]	1316	fi
	1317	fi
	1318	fi
	1319
	1320
[40]	1321	# NEUE VERSION AUF LOKALEM RECHNER ZUSAMMENPACKEN
	1322	printf "\n *** tar update on local host ..."
	1323	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
[1]	1324
[22]	1325
	1326	# COMPILE THE UTILITY PROGRAMS
[40]	1327	elif [[ $compile_utility_programs = true ]]
[22]	1328	then
	1329	printf "\n\n"
	1330	echo " *** compiling the utility programs ..."
	1331	cd ${local_source_path}/../UTIL
[35]	1332	make F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
[22]	1333	cd - > /dev/null
	1334	fi
	1335
[1]	1336	fi
	1337
	1338	fi
	1339	done
	1340
	1341
	1342	if [[ $host_found = false ]]
	1343	then
	1344	if [[ $host = all ]]
	1345	then
	1346	printf "\n +++ no hosts found in configuration file"
	1347	else
	1348	printf "\n +++ host \"$host\" not found in configuration file"
	1349	fi
	1350	locat=config_file; exit
	1351	fi
	1352
	1353
	1354
	1355	# ABSCHLIESSENDE ARBEITEN
	1356	rm -f hosts_found_in_config_file
	1357

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |