Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 397

Last change on this file since 397 was 367, checked in by maronga, 15 years ago
adapted for machine lck
Property svn:keywords set to `Id Rev`
File size: 48.4 KB

Rev	Line
[1]	1	#!/bin/ksh
[66]	2	# mbuild - Programmuebersetzungsscript
[169]	3	# $Id: mbuild 367 2009-08-25 08:35:52Z raasch $
[1]	4
	5	# Prozedur zur Uebersetzung von Programmteilen mittels make-Mechanismus
	6	# auf einem Remote-Rechner, ausgehend von Quellcode auf einem lokalen
	7	# Rechner
	8
	9	# Folgende Probleme existieren unter Linux, wenn keine AT&T-Korn-Shell
	10	# verwendet wird:
	11	# Wertzuweisungen an Variablen innerhalb von DO-Schleifen werden nicht
	12	# nach aussen weitergegeben. "while read line" funktioniert nicht
	13	# innerhalb einer Pipe.
	14
	15	# letzte Aenderung:
	16	# 06/05/02 - Siggi - Beginn der Entwicklung
	17	# 12/06/02 - Siggi - Abschluss der Entwicklungsarbeiten
	18	# 23/06/02 - Siggi - voerst kein make-clean, Abbruch bei batch-mode
	19	# 24/07/02 - Siggi - Keine Verwendung der temporaeren Datei tmp_mbuild
	20	# unter linux mehr noetig, da nun AT&T-Korn-Shell
	21	# benutzt wird
	22	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) validiert
	23	# 19/12/02 - Siggi - ibmb validiert
	24	# 05/02/03 - Siggi - hostname nobela included
	25	# 04/03/03 - Siggi - host nech included
	26	# 06/03/03 - Siggi - make_call_string is echoed without '' to
	27	# file LAST_MAKE_CALL (otherwise error on NEC, because
	28	# '' are part of compiler options
	29	# 16/03/03 - Siggi - Two underscores are placed in front of every define
	30	# string, in case that palm.f90 version contains
	31	# such strings
	32	# 16/04/03 - Siggi - First extensions for linux machines
	33	# 24/06/03 - Siggi - host orkan included
	34	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
	35	# 24/07/03 - Siggi - host maestro admitted
	36	# 06/08/03 - Siggi - host gregale admitted
	37	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
	38	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
	39	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
	40	# (-D$OMP=OMP) in order to avoid problems with
	41	# OMP_NUM_THREADS
	42	# 09/01/04 - Siggi - action above cancelled
	43	# 28/01/04 - Siggi - action above re-cancelled
	44	# 08/03/04 - Siggi - host scirocco admitted
	45	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
	46	# the respective .f90 file is not listed in the makefile
	47	# and deletion is demanded by the user
	48	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
	49	# due to error in ssh installation (otherwise a prompt
	50	# for the password appears)
	51	# 23/07/04 - Siggi - changes due to the new berni configuration
	52	# (federation switch)
	53	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
	54	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
	55	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
	56	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
	57	# 24/04/05 - Siggi - netcdf support on lcmuk
	58	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
	59	# 12/05/05 - Siggi - netcdf support on ibm
	60	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
	61	# 18/05/05 - Siggi - netcdf support on nec
	62	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
	63	# 23/05/05 - Siggi - netcdf support on ibms
	64	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
	65	# 30/06/05 - Siggi - netcdf support on bora
	66	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
	67	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
	68	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
	69	# host gfdl5 (ibmy) admitted
	70	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
	71	# 20/01/06 - Siggi - cpp directive for ibmy
	72	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
	73	# 10/02/06 - Siggi - modifications for scp on decalpha
	74	# 13/04/06 - Siggi - ostria admitted
	75	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
	76	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
	77	# 29/05/05 - Siggi - atmos (lcide) admitted
	78	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
	79	# 24/11/06 - Siggi - breva and levanto admitted
	80	# 07/02/07 - Siggi - adapted for RIAM (neck)
[5]	81	# 10/02/07 - Siggi - all hpmuk-related code removed
[40]	82	# 02/03/07 - Siggi - compilation of utility programs and transfer of
[27]	83	# scripts to remote hosts added (option -u)
[66]	84	# 14/03/07 - Siggi - fimm admitted, revision number added to terminal
	85	# output
[69]	86	# 16/03/07 - Siggi - adjustments (netcdf) for lctit
	87	# adjustments for running under pdksh, local ip-addres
	88	# is not determined any more
[82]	89	# 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
	90	# from configuration file
	91	# host identifier (local_host) is read from config file
[116]	92	# 10/10/07 - Siggi - bugfix: handling of comment lines
[181]	93	# 18/07/08 - Siggi - adapted for lcsgih
	94	# 21/07/08 - Siggi - mainprog (executable) is added to the tar-file
	95	# ({mainprog}_current_version)
[206]	96	# 02/10/08 - Siggi - adapted for lcxt4
[215]	97	# 14/11/08 - Siggi - update mechanism completely revised: source tarfile
	98	# remains in source directory, one depository per block
[266]	99	# (given in the config-file) is created, allways all
	100	# files from the source directory are copied to the
	101	# respective depository, no additional file checks are
	102	# done any more (version 2.1)
[224]	103	# 13/01/09 - Marcus- re-enable compilation more than once on lcmuk (as on
	104	# other machines)
[266]	105	# 21/03/09 - Siggi - -u copies also copies process_dvr_output and
	106	# .dvrserver.config
[305]	107	# 21/04/09 - Siggi - adjustments for new IBM at DKRZ, which is now ibmh
[367]	108	# 25/08/09 - BjornM- adapted for lck
[1]	109
	110
	111
	112	# VARIABLENVEREINBARUNGEN + DEFAULTWERTE
[22]	113	compile_utility_programs=false
[1]	114	config_file=.mrun.config
[67]	115	fimm=false
[1]	116	host=all
	117	host_found=false
	118	locat=normal
	119	makefile=""
	120	remote_mode=interactive
	121	scirocco=false
	122	silent=false
	123	suf=f90
	124	update=false
[83]	125	working_directory=`pwd`
[1]	126
	127	typeset -i ih ihost=0
	128
[66]	129	typeset -R30 calltime
[1]	130	typeset -L20 column1
	131	typeset -L50 column2
	132	typeset -L70 column3
[215]	133	typeset -L40 version="MBUILD 2.1 Rev$Rev: 367 $"
[1]	134
	135	# FEHLERBEHANDLUNG
	136	# BEI EXIT:
[83]	137	trap 'rm -rf $working_directory/tmp_mbuild
[69]	138	if [[ $locat != normal ]]
[1]	139	then
	140	printf "\n\n +++ mbuild killed \n\n"
	141	else
	142	printf "\n\n *** mbuild finished \n\n"
	143	fi' exit
	144
	145
	146	# BEI TERMINAL-BREAK:
[83]	147	trap 'rm -rf $working_directory/tmp_mbuild
[69]	148	printf "\n\n +++ mbuild killed by \"^C\" \n\n"
[1]	149	exit
	150	' 2
	151
	152
[215]	153	tmp_mbuild=${working_directory}/tmp_mbuild
[1]	154
	155	# SHELLSCRIPT-OPTIONEN EINLESEN
[22]	156	while getopts :c:h:m:rs:u option
[1]	157	do
	158	case $option in
	159	(c) config_file=$OPTARG;;
	160	(h) host=$OPTARG;;
	161	(m) makefile=$OPTARG;;
	162	(r) remote_mode=batch;;
	163	(s) suf=$OPTARG;;
[22]	164	(u) compile_utility_programs=true;;
[1]	165	(\?) printf "\n +++ unknown option $OPTARG \n";
	166	locat=parameter; exit;;
	167	esac
	168	done
	169
	170
	171
	172	# BATCH-MODE IST ZUR ZEIT NICHT FUNKTIONSFAEHIG
	173	if [[ $remote_mode = batch ]]
	174	then
	175	printf "\n +++ sorry, batch mode does not work! \n"
	176	locat=parameter; exit
	177	fi
	178
	179
	180
[82]	181	# PRUEFEN, OB KONFIGURATIONS-DATEI VORHANDEN
	182	if [[ ! -f $config_file ]]
	183	then
	184	printf "\n +++ configuration file: "
	185	printf "\n $config_file"
	186	printf "\n does not exist"
	187	locat=configuration; exit
	188	fi
	189
	190
	191
[1]	192	# LOKALEN RECHNER ERMITTELN
	193	local_host_real_name=$(hostname)
[69]	194	# local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
	195
[1]	196
[82]	197
	198	# HOST-IDENTIFIER (local_host) AUS KONFIGURATIONSDATEI BESTIMMEN
	199	line=""
[215]	200	grep "%host_identifier" $config_file > $tmp_mbuild
[82]	201	while read line
	202	do
[116]	203	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
[82]	204	then
	205	HOSTNAME=`echo $line \| cut -d" " -s -f2`
	206	host_identifier=`echo $line \| cut -d" " -s -f3`
[83]	207	if [[ $local_host_real_name = $HOSTNAME ]]
[82]	208	then
	209	local_host=$host_identifier
	210	break
	211	fi
	212	fi
[215]	213	done < $tmp_mbuild
[82]	214
	215	if [[ "$local_host" = "" ]]
	216	then
	217	printf "\n +++ no host identifier found in configuration file \"$config_file\""
	218	printf "\n for local host \"$local_host_real_name\"."
	219	printf "\n Please add line"
	220	printf "\n \"\%host_identifier $local_host_real_name <identifier>\""
	221	printf "\n to the configuration file."
	222	locat=local_host; exit
	223	fi
	224
	225
	226
[1]	227	[[ $local_host_real_name = scirocco ]] && scirocco=true
[67]	228	[[ $local_host_real_name = fimm.bccs.uib.no ]] && fimm=true
[1]	229
	230
	231
	232	if [[ $local_host != ibms ]]
	233	then
	234	config_file=$PWD/$config_file
	235	else
	236	config_file=`pwd`/$config_file
	237	fi
	238
	239
	240
	241	# BENUTZERNAMEN AUF LOKALEM RECHNER AUS KONFIGURATIONSDATEI ERMITTELN
	242	line=""
[215]	243	grep " $local_host" $config_file \| grep "%remote_username" > $tmp_mbuild
[69]	244	while read line
[1]	245	do
[116]	246	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
[1]	247	then
	248	local_username=`echo $line \| cut -d" " -s -f2`
	249	fi
[215]	250	done < $tmp_mbuild
[1]	251
[82]	252
[1]	253	if [[ "$local_username" = "" ]]
	254	then
	255	printf "\n +++ no user name found in configuration file"
	256	printf "\n for local host \"$local_host\" "
	257	locat=config_file; exit
	258	fi
	259
	260
[5]	261	# LOKALEN QUELLTEXTPFAD ERMITTELN.
	262	# ZUERST PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD FUER ALLE RECHNER
	263	# VEREINBART WURDE.
	264	# DAZU ZUNAECHST ALLE IN DER KONFIGURATIONSDATEI VEREINBARTEN GLOBALEN
	265	# VARIABLEN SETZEN, WEIL DIESE EVTL. IN PFADNAMEN VERWENDET WERDEN
	266	line=""
[215]	267	grep "%" $config_file > $tmp_mbuild
[69]	268	while read line
[5]	269	do
[116]	270	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" && $(echo $line \| cut -c1) != "#" ]]
[1]	271	then
[5]	272	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
	273	value=`echo $line \| cut -d" " -s -f2`
[8]	274	eval export $var=\$value
[9]	275	# eval echo \" $var=\$$var \" # AUSGABE ZU TESTZWECKEN
[1]	276	fi
[215]	277	done < $tmp_mbuild
[1]	278
[5]	279	# NUN PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD VEREINBART WURDE
[1]	280	line=""
[215]	281	grep "%source_path" $config_file > $tmp_mbuild
[69]	282	while read line
[1]	283	do
	284	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	285	then
	286	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
	287	then
	288	global_source_path=`echo $line \| cut -d" " -s -f2`
	289	fi
	290	fi
[215]	291	done < $tmp_mbuild
[1]	292
	293	line=""
[215]	294	grep " $local_host" $config_file \| grep "%source_path" > $tmp_mbuild
[69]	295	while read line
[1]	296	do
	297	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	298	then
	299	local_source_path=`echo $line \| cut -d" " -s -f2`
	300	fi
[215]	301	done < $tmp_mbuild
[1]	302
	303	if [[ "$local_source_path" = "" ]]
	304	then
	305	if [[ "$global_source_path" != "" ]]
	306	then
	307	local_source_path=$global_source_path
	308	else
	309	printf "\n +++ no source path found in configuration file"
	310	printf "\n for local host \"$local_host\" "
	311	printf "\n please set \"\%source_path\" in configuration file"
	312	locat=config_file; exit
	313	fi
	314	fi
	315	eval local_source_path=$local_source_path
[8]	316	eval local_source_path=$local_source_path
[1]	317
	318
[215]	319
	320	# GLOBALEN DEPOSITORY-PFAD ERMITTELN
[1]	321	line=""
[215]	322	grep "%depository_path" $config_file > $tmp_mbuild
[69]	323	while read line
[1]	324	do
	325	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	326	then
	327	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
	328	then
	329	global_depository_path=`echo $line \| cut -d" " -s -f2`
	330	fi
	331	fi
[215]	332	done < $tmp_mbuild
[1]	333
	334
	335
[5]	336	# PRUEFEN, OB IN KONFIGURATIONSDATEI EIN HAUPTPROGRAMM
	337	# VEREINBART WURDE
	338	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
	339	then
	340	printf "\n +++ no main program or more than one main program defined"
	341	printf "\n in configuration file"
	342	locat=configuration; exit
	343	else
	344	line=`grep "%mainprog" $config_file`
	345	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
	346	then
	347	printf "\n +++ no main program defined in configuration file"
	348	locat=configuration; exit
	349	fi
	350	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
	351	fi
	352
	353
	354
[1]	355	# MAKEFILE vorhanden
	356	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
	357	if [[ ! -f $makefile ]]
	358	then
	359	printf "\n +++ makefile: "
	360	printf "\n $makefile"
	361	printf "\n does not exist"
	362	locat=makefile; exit
	363	fi
	364
	365
	366	# HEADER-AUSGABE (TEIL1: MELDUNGEN UEBER LOKALEN RECHNER)
	367	calltime=$(date)
	368	printf "\n"
	369	printf "#------------------------------------------------------------------------# \n"
	370	printf "\| $version$calltime \| \n"
	371	printf "\| \| \n"
	372	column1="called on:"; column2=$local_host_real_name
	373	printf "\| $column1$column2 \| \n"
	374	column1="local username:"; column2=$local_username
	375	printf "\| $column1$column2 \| \n"
	376	column1="local IP-addres:"; column2=$local_addres
	377	printf "\| $column1$column2 \| \n"
	378	column1="config file:"; column2=$config_file
	379	printf "\| $column1$column2 \| \n"
	380	column1="makefile:"; column2=$makefile
	381	printf "\| $column1$column2 \| \n"
	382	column1="local source path:"; column2=$local_source_path
	383	printf "\| $column1$column2 \| \n"
	384	printf "#------------------------------------------------------------------------# \n"
	385
	386	# printf "\| \| \n"
	387
	388
[40]	389	if [[ $compile_utility_programs = false ]]
	390	then
[1]	391
[40]	392	# IN JEDEM FALL ALLEN DATEIEN WRITE-PERMIT GEBEN, DAMIT ES AUF
	393	# DEN REMOTE-RECHNERN NICHT EVTL. ZU PROBLEMEN BEIM UEBERSCHREIBEN KOMMT
[215]	394	cd $local_source_path
	395	printf "\n\n *** tar of makefile and source files in $local_source_path"
[40]	396	tar -cf ${mainprog}_sources.tar Makefile *.$suf
	397	printf "\n"
[1]	398
[40]	399	fi
[1]	400
	401
[40]	402
[1]	403	# BESTAETIGUNG ZUM WEITERMACHEN EINHOLEN
	404	if [[ $host = all ]]
	405	then
	406	printf "\n *** updates will be made for ALL hosts found in"
	407	printf "\n the configuration file"
	408	else
	409	printf "\n *** update will be made for host \"$host\" "
	410	fi
	411
	412	if [[ $silent = false ]]
	413	then
	414	answer=dummy
	415	printf "\n\n"
	416	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
	417	do
	418	printf " >>> continue (y/n) ? "
	419	read answer
	420	done
	421	if [[ $answer = n \|\| $answer = N ]]
	422	then
	423	locat=user_abort; exit
	424	fi
	425	fi
	426
	427
	428
	429
	430	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
	431	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
	432	printf "\n *** scanning configuration file for host(s) ..."
	433
[215]	434	grep %fopts $config_file > $tmp_mbuild
[69]	435	while read line
[1]	436	do
	437	# KOMMENTARZEILEN UEBERSPRINGEN
	438	[[ $(echo $line \| cut -c1) = "#" ]] && continue
	439	(( ihost = ihost + 1 ))
	440	hostline[$ihost]="$line"
[215]	441	done < $tmp_mbuild
[1]	442
	443
	444	while (( ih < ihost ))
	445	do
	446
	447	(( ih = ih + 1 ))
	448
	449	# REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
	450	# NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
	451	# SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
	452	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
	453	remote_host=`echo $remote_host_string \| cut -d" " -f1`
	454	if [[ $host != all ]]
	455	then
	456	[[ $remote_host != $host ]] && continue
	457	fi
	458	host_found=true
	459	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
	460	if [[ $condition1 = $remote_host ]]
	461	then
	462	condition1=""
	463	else
	464	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
	465	fi
	466
[82]	467	netcdf_inc=""
	468	netcdf_lib=""
[1]	469
	470	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
	471	case $remote_host in
[116]	472	(lcmuk) remote_addres=130.75.105.2;;
[181]	473	(lcsgib) remote_addres=130.73.232.102;;
[346]	474	(lcsgih) remote_addres=130.75.4.102;;
[367]	475	(lck) remote_addres=165.132.26.61;;
[83]	476	(lctit) remote_addres=172.17.75.161;;
[206]	477	(lcxt4) remote_addres=129.177.20.113;;
[83]	478	(decalpha) remote_addres=165.132.26.56;;
[305]	479	(ibmh) remote_addres=136.172.40.15;;
[83]	480	(ibms) remote_addres=150.183.5.101;;
	481	(ibmy) remote_addres=165.132.26.58;;
	482	(nech) remote_addres=136.172.44.192;;
	483	(neck) remote_addres=133.5.178.11;;
	484	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
	485	(*) if [[ $local_host != $remote_host ]]
[1]	486	then
[83]	487	printf "\n +++ remote host \"$remote_host\" unknown";
	488	printf "\n please inform S. Raasch!"
[1]	489	fi;;
	490	esac
	491
	492
	493	# REMOTE-USERNAMEN ERMITTELN
	494	line=""
[116]	495	found=false
[215]	496	grep "$remote_host_string" $config_file \| grep "%remote_username" > $tmp_mbuild
[69]	497	while read line1
[1]	498	do
[116]	499
[1]	500	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	501	then
	502	line="$line1"
	503	fi
[116]	504
	505	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	506	then
	507	remote_username=`echo $line \| cut -d" " -s -f2`
	508	found=true
	509	fi
	510
[215]	511	done < $tmp_mbuild
[1]	512
[116]	513	if [[ $found = false ]]
[1]	514	then
	515	printf "\n +++ no remote username found in configuration file"
	516	printf "\n for \"$remote_host_string\" "
	517	locat=config_file; exit
	518	fi
	519
	520
	521	# REMOTE-QUELLTEXTPFAD ERMITTELN
	522	line=""
[54]	523	remote_source_path=""
[215]	524	grep "$remote_host_string" $config_file \| grep "%source_path" > $tmp_mbuild
[69]	525	while read line1
[1]	526	do
[116]	527
[1]	528	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	529	then
	530	line="$line1"
	531	fi
[116]	532
	533	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	534	then
	535	remote_source_path=`echo $line \| cut -d" " -s -f2`
	536	fi
	537
[215]	538	done < $tmp_mbuild
[1]	539
	540	if [[ "$remote_source_path" = "" ]]
	541	then
	542	if [[ "$global_source_path" != "" ]]
	543	then
	544	remote_source_path=$global_source_path
	545	else
	546	printf "\n +++ no source path found in configuration file"
	547	printf "\n for \"$remote_host_string\" "
	548	locat=config_file; exit
	549	fi
	550	fi
	551
[22]	552	remote_ud=${remote_source_path}/../UTIL
[24]	553	remote_ud=$(eval echo $remote_ud)
[1]	554
[54]	555
[1]	556	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
[54]	557	remote_md=""
[1]	558	line=""
[215]	559	grep "$remote_host_string" $config_file \| grep "%depository_path" > $tmp_mbuild
[69]	560	while read line1
[1]	561	do
[116]	562
[1]	563	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	564	then
	565	line="$line1"
	566	fi
[116]	567
	568	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	569	then
	570	remote_md=`echo $line \| cut -d" " -s -f2`
	571	fi
	572
[215]	573	done < $tmp_mbuild
[1]	574
	575	if [[ "$remote_md" = "" ]]
	576	then
	577	if [[ "$global_depository_path" != "" ]]
	578	then
	579	remote_md=$global_depository_path
	580	else
	581	printf "\n +++ no depository path found in configuration file"
	582	printf "\n for \"$remote_host_string\" "
	583	printf "\n please set \"\%depository_path\" in configuration file"
	584	locat=config_file; exit
	585	fi
	586	fi
	587
[8]	588	remote_md=$(eval echo $remote_md)
[215]	589	[[ "$condition1" != "" ]] && remote_md=${remote_md}_$condition1
	590	[[ "$condition2" != "" ]] && remote_md=${remote_md}_$condition2
[1]	591
[8]	592
[1]	593	# COMPILERNAMEN ERMITTELN
	594	line=""
[116]	595	found=false
[215]	596	grep "$remote_host_string" $config_file \| grep "%compiler_name " > $tmp_mbuild
[69]	597	while read line1
[1]	598	do
[116]	599
[1]	600	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	601	then
	602	line="$line1"
	603	fi
[116]	604
	605	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	606	then
	607	compiler_name=`echo $line \| cut -d" " -s -f2`
	608	found=true
	609	fi
	610
[215]	611	done < $tmp_mbuild
[1]	612
[116]	613	if [[ $found = false ]]
[1]	614	then
	615	printf "\n +++ no compiler name found in configuration file"
	616	printf "\n for \"$remote_host_string\" "
	617	locat=config_file; exit
	618	fi
	619
	620
[27]	621	# BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
	622	# SERIELLER COMPILERNAME ERMITTELT WERDEN
	623	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
	624	then
	625	line=""
[116]	626	found=false
[215]	627	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" > $tmp_mbuild
[69]	628	while read line1
[27]	629	do
[116]	630
[27]	631	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	632	then
	633	line="$line1"
	634	fi
[116]	635
	636	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	637	then
	638	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
	639	found=true
	640	fi
	641
[215]	642	done < $tmp_mbuild
[1]	643
[116]	644	if [[ $found = false ]]
[27]	645	then
[28]	646	printf "\n +++ no serial compiler name found in configuration file"
[27]	647	printf "\n for \"$remote_host_string\" "
	648	locat=config_file; exit
	649	fi
	650	else
	651	compiler_name_ser=$compiler_name
	652	fi
	653
	654
	655
[82]	656	# PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
	657	line=""
[116]	658	found=false
[215]	659	grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
[82]	660	while read line1
	661	do
[116]	662
[82]	663	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	664	then
	665	line="$line1"
	666	fi
[116]	667
	668	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	669	then
	670	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	671	cpp_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	672	found=true
	673	fi
	674
[215]	675	done < $tmp_mbuild
[116]	676
	677	if [[ $found = false ]]
[82]	678	then
	679	printf "\n +++ no preprocessor options found in configuration file"
	680	printf "\n for \"$remote_host_string\" "
	681	locat=config_file; exit
	682	fi
	683
[116]	684
[82]	685	# RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
	686	for string in $remote_host_string
	687	do
	688	if [[ $(echo $remote_host \| cut -c1-2) = lc && $(echo $string \| cut -c1-2) = lc ]]
	689	then
	690	cpp_options="$cpp_options -D__lc "
[83]	691	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $(echo $string \| cut -c1-3) = ibm ]]
	692	then
	693	cpp_options="${cpp_options},-D__ibm"
	694	elif [[ $(echo $remote_host \| cut -c1-3) = nec && $(echo $string \| cut -c1-3) = nec ]]
	695	then
	696	cpp_options="${cpp_options} -D__nec"
[82]	697	else
[83]	698	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
	699	then
	700	cpp_options="${cpp_options},-D__$string"
	701	else
	702	cpp_options="$cpp_options -D__$string "
	703	fi
[82]	704	fi
	705	done
	706
	707
	708
	709	# NETCDF-OPTIONEN ERMITTELN
	710	line=""
[215]	711	grep "$remote_host_string" $config_file \| grep "%netcdf_inc" > $tmp_mbuild
[82]	712	while read line1
	713	do
[116]	714
[82]	715	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	716	then
	717	line="$line1"
	718	fi
[116]	719
	720	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	721	then
	722	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	723	netcdf_inc=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	724	fi
	725
[215]	726	done < $tmp_mbuild
[82]	727
	728	line=""
[215]	729	grep "$remote_host_string" $config_file \| grep "%netcdf_lib" > $tmp_mbuild
[82]	730	while read line1
	731	do
[116]	732
[82]	733	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	734	then
	735	line="$line1"
	736	fi
[116]	737
	738	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	739	then
	740	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	741	netcdf_lib=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	742	fi
	743
[215]	744	done < $tmp_mbuild
[82]	745
	746
	747
[1]	748	# COMPILEROPTIONEN ERMITTELN
	749	line=""
[116]	750	found=false
[215]	751	grep "$remote_host_string" $config_file \| grep "%fopts" > $tmp_mbuild
[69]	752	while read line1
[1]	753	do
[116]	754
[1]	755	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	756	then
	757	line="$line1"
	758	fi
[116]	759
	760	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	761	then
	762	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	763	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	764	found=true
	765
	766	# NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
	767	compiler_options="$compiler_options $netcdf_inc"
	768	fi
	769
[215]	770	done < $tmp_mbuild
[116]	771
	772	if [[ $found = false ]]
[1]	773	then
	774	printf "\n +++ no compiler options found in configuration file"
	775	printf "\n for \"$remote_host_string\" "
	776	locat=config_file; exit
	777	fi
[82]	778
[1]	779
	780
[221]	781	# MPI LIBRARY ERMITTELN
	782	line=""
	783	found=false
	784	grep "$remote_host_string" $config_file \| grep "%mpilib" > $tmp_mbuild
	785	while read line1
	786	do
	787
	788	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	789	then
	790	line="$line1"
	791	fi
	792
	793	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	794	then
	795	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	796	mpilib=`echo $line \| cut -d" " -s -f2`
	797	found=true
	798	fi
	799
	800	done < $tmp_mbuild
	801
	802	[[ $found = false ]] && mpilib=mpt
	803
	804
	805
	806
[1]	807	# LADER-OPTIONEN ERMITTELN
	808	line=""
[116]	809	found=false
[215]	810	grep "$remote_host_string" $config_file \| grep "%lopts" > $tmp_mbuild
[69]	811	while read line1
[1]	812	do
[116]	813
[1]	814	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	815	then
	816	line="$line1"
	817	fi
[116]	818
	819	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	820	then
	821	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	822	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	823	found=true
	824
	825	# NETCDF-LIBRARY HINZUFUEGEN
	826	loader_options="$loader_options $netcdf_lib"
	827	fi
	828
[215]	829	done < $tmp_mbuild
[1]	830
[116]	831	if [[ $found = false ]]
[1]	832	then
	833	printf "\n +++ no loader options found in configuration file"
	834	printf "\n for \"$remote_host_string\" "
	835	locat=config_file; exit
	836	fi
[82]	837
[1]	838
	839	printf "\n\n#------------------------------------------------------------------------# \n"
	840	if [[ $remote_host = $local_host ]]
	841	then
	842	column1="remote_host:"; column2="$remote_host (= local host!)"
	843	else
	844	column1="remote_host:"; column2=$remote_host
	845	fi
	846	printf "\| $column1$column2 \| \n"
	847	printf "\| \| \n"
	848	column1="conditions:"; column2="$condition1 $condition2"
	849	printf "\| $column1$column2 \| \n"
	850	column1="make depository:"; column2=$remote_md
	851	printf "\| $column1$column2 \| \n"
[215]	852	line=$(echo "$remote_md" \| cut -c51-)
	853	while [[ "$line" != "" ]]
	854	do
	855	column1=""
	856	column2=$line
	857	printf "\| $column1$column2 \| \n"
	858	line=$(echo "$line" \| cut -c51-)
	859	done
[25]	860	if [[ $compile_utility_programs = true ]]
	861	then
	862	column1="utility directory:"; column2=$remote_ud
	863	printf "\| $column1$column2 \| \n"
	864	fi
[1]	865	column1="username:"; column2=$remote_username
	866	printf "\| $column1$column2 \| \n"
	867	column1="addres:"; column2=$remote_addres
	868	printf "\| $column1$column2 \| \n"
	869	column1="compiler:"; column2=$compiler_name
	870	printf "\| $column1$column2 \| \n"
[28]	871	if [[ $compile_utility_programs = true ]]
	872	then
	873	column1="serial compiler:"; column2=$compiler_name_ser
	874	printf "\| $column1$column2 \| \n"
	875	fi
[1]	876	column1="cpp options:"; column2=$cpp_options
	877	printf "\| $column1$column2 \| \n"
	878	line=$(echo "$cpp_options" \| cut -c51-)
	879	while [[ "$line" != "" ]]
	880	do
	881	column1=""
	882	column2=$line
	883	printf "\| $column1$column2 \| \n"
	884	line=$(echo "$line" \| cut -c51-)
	885	done
	886	column1="compiler options:"; column2=$compiler_options
	887	printf "\| $column1$column2 \| \n"
	888	line=$(echo "$compiler_options" \| cut -c51-)
	889	while [[ "$line" != "" ]]
	890	do
	891	column1=""
	892	column2=$line
	893	printf "\| $column1$column2 \| \n"
	894	line=$(echo "$line" \| cut -c51-)
	895	done
[221]	896	if [[ $( echo $remote_host \| cut -c1-5 ) = lcsgi ]]
	897	then
	898	column1="mpi library:"; column2=$mpilib
	899	printf "\| $column1$column2 \| \n"
	900	fi
[1]	901	column1="loader options:"; column2=$loader_options
	902	printf "\| $column1$column2 \| \n"
	903	line=$(echo "$loader_options" \| cut -c51-)
	904	while [[ "$line" != "" ]]
	905	do
	906	column1=""
	907	column2=$line
	908	printf "\| $column1$column2 \| \n"
	909	line=$(echo "$line" \| cut -c51-)
	910	done
	911	printf "#------------------------------------------------------------------------# \n"
	912
	913	if [[ $silent = false ]]
	914	then
	915	answer=dummy
	916	printf "\n\n"
	917	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
	918	do
	919	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
	920	read answer
	921	done
	922	if [[ $answer = a \|\| $answer = A ]]
	923	then
	924	locat=user_abort; exit
	925	fi
	926	if [[ $answer = c \|\| $answer = C ]]
	927	then
	928	silent=false
	929	fi
	930	if [[ $answer = s \|\| $answer = S ]]
	931	then
	932	continue
	933	fi
	934	fi
	935
	936
	937	if [[ $remote_mode = batch ]]
	938	then
	939
	940	# BATCH-JOB PARAMETER SETZEN
	941	case $remote_host in
	942	(t3eb) queue=berte; memory=60; cputime=1000; xoption="-X 0";;
	943	(t3eh) queue=comp_t3e; memory=60; cputime=360;;
	944	(t3ej2) queue=normal; memory=60; cputime=1000; xoption="-X 0";;
[5]	945	(t3ej5\|ground.yonsei.ac.kr) printf "\n --- remote host \"$remote_host\" does not allow batch jobs"; continue;;
[1]	946	esac
	947
	948
	949	# BATCH-JOB ZUSAMMENSTELLEN
	950	printf "\n *** creating batch-job for remote host"
	951	echo " " > mbuild_job
	952
	953	# AUF CRAY-RECHNERN IN JUELICH WIRD KEIN BENUTZER-PROFILE AUSGEFUEHRT
	954	# DIES WIRD HIER GETAN, UM PFADE USW. ZU SETZEN
	955	if [[ $remote_host = t3ej2 ]]
	956	then
	957	echo "set +vx" >> mbuild_job
	958	echo ". .profile" >> mbuild_job
	959	echo "set -x" >> mbuild_job
	960	fi
	961
	962	# AUF CRAY-RECHNERN GELADENE MODULE AUFLISTEN
	963	if [[ $host = t3eb \|\| $host = t3eh \|\| $host = t3ej2 ]]
	964	then
	965	echo "module list" >> mbuild_job
	966	fi
	967
	968
	969	# WECHSEL IN TEMPORAERES VERZEICHNIS
	970	echo "cd ${remote_md}" >> mbuild_job
	971
	972
	973	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	974	echo "scp ${local_username}@${local_addres}:~/modell/code_3dp/palm_current_version/${mainprog}_sources.tar ${mainprog}_sources.tar" >> mbuild_job
	975	# echo "[[ \$? != 0 ]] && (echo "+++ scp failed"; exit)" >> mbuild_job
	976
	977
	978	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
	979	echo "[[ -f ${mainprog}_current_version.tar ]] && tar -xvf ${mainprog}_current_version.tar" >> mbuild_job
	980
	981
	982	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
	983	echo "tar -xvf ${mainprog}_sources.tar" >> mbuild_job
	984
	985
	986	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	987	echo "make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " >> mbuild_job
	988	echo "chmod u+w *" >> mbuild_job
	989
	990	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
	991	echo "tar -cvf ${mainprog}_current_version.tar .f90 .o" >> mbuild_job
	992
	993
	994	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
	995	echo "make clean" >> mbuild_job
	996	echo "rm ${mainprog}_sources.tar" >> mbuild_job
	997	echo "rm *.f90 Makefile" >> mbuild_job
	998
	999
	1000
	1001	# JOB MITTELS SUBJOB STARTEN
	1002	printf "\n *** sending batch job to remote host"
	1003	# subjob $xoption -h $remote_host -q $queue -m $memory -t $cputime -v mbuild_job
	1004
	1005
	1006	# JOBFILE LOESCHEN
	1007	# rm aljob
	1008
	1009	else
	1010
	1011	if [[ $remote_host != $local_host ]]
	1012	then
	1013
[40]	1014	if [[ $compile_utility_programs = false ]]
[1]	1015	then
	1016
[40]	1017	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	1018	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
	1019	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
	1020	if [[ $remote_host != lctit ]]
	1021	then
	1022	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
	1023	else
[206]	1024	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
[40]	1025	# MIT SSH, DESHALB AUFRUF PER PIPE
	1026	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
	1027	fi
	1028	if [[ $local_host = decalpha ]]
	1029	then
[206]	1030	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
[40]	1031	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1032	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1033	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
[215]	1034	/bin/scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
[40]	1035	else
[215]	1036	scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
[40]	1037	fi
[1]	1038
	1039
	1040
[40]	1041	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
	1042	echo " *** untar previous update on remote host, if existing"
	1043	if [[ $remote_host != lctit ]]
	1044	then
	1045	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
	1046	else
[206]	1047	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
[40]	1048	# MIT SSH, DESHALB AUFRUF PER PIPE
	1049	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
	1050	fi
[1]	1051
	1052
[40]	1053	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
	1054	echo " *** untar actual sources on remote host"
	1055	if [[ $remote_host != lctit ]]
	1056	then
	1057	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
	1058	else
[206]	1059	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
[40]	1060	# MIT SSH, DESHALB AUFRUF PER PIPE
	1061	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
	1062	fi
[1]	1063
	1064
[40]	1065	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1066	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
	1067	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
	1068	# Z.B. DIE PFADE ZUM COMPILER)
	1069	echo " *** execute \"make\" on remote host"
[1]	1070
[40]	1071	if [[ $remote_host = nech ]]
	1072	then
	1073	make_call_string="sxmake PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1074	else
	1075	make_call_string="make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1076	fi
	1077
	1078	if [[ $remote_host = t3eh ]]
	1079	then
[1]	1080
[40]	1081	print "xterm\nexit\n cd ${remote_md}; make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1082
[40]	1083	elif [[ $remote_host = t3ej2 \|\| $remote_host = ibms \|\| $remote_host = ibmy ]]
	1084	then
[1]	1085
[40]	1086	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1087
[305]	1088	elif [[ $remote_host = ibmh ]]
[40]	1089	then
[1]	1090
[40]	1091	print "export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1092
[181]	1093	elif [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
	1094	then
	1095
[366]	1096	print ". /usr/share/modules/init/bash; module load ifort/11.0.069; module load $mpilib; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[196]	1097	# print ". /usr/share/modules/init/bash; module load mvapich2/1.2rc1-intel; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1098	# print ". /usr/share/modules/init/bash; module load mvapich2; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[181]	1099
[40]	1100	elif [[ $remote_host = lctit ]]
	1101	then
[1]	1102
[40]	1103	echo " " > ${remote_host}_last_make_protokoll
	1104	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
	1105	do
	1106	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1107	done
[1]	1108
[206]	1109	elif [[ $remote_host = lcxt4 ]]
	1110	then
	1111
	1112	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1113
[40]	1114	else
[1]	1115
[40]	1116	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1117
[40]	1118	fi
[1]	1119
[40]	1120	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
[1]	1121	then
[40]	1122	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
	1123	if [[ $silent = false ]]
	1124	then
	1125	answer=dummy
	1126	printf "\n"
	1127	while [[ "$answer" != c && "$answer" != k ]]
	1128	do
	1129	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
	1130	read answer
	1131	if [[ "$answer" = l ]]
	1132	then
	1133	more ${remote_host}_last_make_protokoll
	1134	fi
	1135	done
	1136	if [[ $answer = k ]]
[1]	1137	then
[40]	1138	locat=user_abort; exit
[1]	1139	fi
	1140	fi
	1141	fi
	1142
	1143
	1144
[40]	1145	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
	1146	printf "\n *** tar update on remote host ..."
	1147	if [[ $remote_host != lctit ]]
	1148	then
[181]	1149	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod"
[40]	1150	else
[206]	1151	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
[40]	1152	# MIT SSH, DESHALB AUFRUF PER PIPE
[181]	1153	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
[40]	1154	fi
[1]	1155
	1156
[40]	1157	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
	1158	# printf "\n *** \"make clean\" on remote host ..."
	1159	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
	1160	# printf "\n"
[1]	1161
	1162
[25]	1163
	1164
[22]	1165	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
	1166	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	1167	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
[40]	1168	elif [[ $compile_utility_programs = true ]]
[22]	1169	then
	1170
[24]	1171	printf "\n\n"
[27]	1172	echo " *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
	1173	cd ${local_source_path}/../SCRIPTS
[22]	1174
	1175	if [[ $remote_host != lctit ]]
	1176	then
[24]	1177	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
[22]	1178	else
[206]	1179	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
[22]	1180	# MIT SSH, DESHALB AUFRUF PER PIPE
[24]	1181	print "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_addres} 2>&1
[22]	1182	fi
	1183
[27]	1184	# KOPIEREN DER SCRIPTE
[22]	1185	if [[ $local_host = decalpha ]]
	1186	then
[206]	1187	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
[22]	1188	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1189	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1190	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
[266]	1191	/bin/scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
[27]	1192	else
[266]	1193	scp batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
[27]	1194	fi
	1195
	1196	cd - > /dev/null
	1197	cd ${local_source_path}/../UTIL
	1198
	1199
	1200	# KOPIEREN DER UTILITY-PROGRAMME
	1201	if [[ $local_host = decalpha ]]
	1202	then
[206]	1203	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
[27]	1204	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1205	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1206	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
[24]	1207	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
[22]	1208	else
[24]	1209	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
[22]	1210	fi
	1211
	1212
	1213
	1214	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1215	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
	1216	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
	1217	# Z.B. DIE PFADE ZUM COMPILER)
	1218	echo " *** execute \"make\" on remote host"
	1219
	1220	if [[ $remote_host = nech ]]
	1221	then
[27]	1222	make_call_string="sxmake F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
[22]	1223	else
[27]	1224	make_call_string="make F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
[22]	1225	fi
	1226
	1227	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
	1228	then
	1229
[25]	1230	ssh ${remote_username}@${remote_addres} "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
[22]	1231
[305]	1232	elif [[ $remote_host = ibmh ]]
[22]	1233	then
	1234
[25]	1235	print "export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres}
[22]	1236
	1237	elif [[ $remote_host = lctit ]]
	1238	then
	1239
	1240	echo " " > ${remote_host}_last_make_protokoll
	1241	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
	1242	do
	1243	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1244	done
	1245
	1246	else
	1247
	1248	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1249
	1250	fi
	1251
	1252	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
	1253
[75]	1254	rm -rf ${remote_host}_last_make_protokoll
[22]	1255
[1]	1256	else
	1257
[40]	1258	if [[ $compile_utility_programs = false ]]
	1259	then
[1]	1260
[215]	1261	# DEPOSITORY VERZEICHNIS ERZEUGEN, FALLS NOCH NICHT VORHANDEN
	1262	eval remote_md=$remote_md
	1263	if [[ ! -d $remote_md ]]
	1264	then
	1265	if mkdir $remote_md
	1266	then
	1267	printf "\n\n *** directory for make depository:"
	1268	printf "\n $remote_md"
	1269	printf "\n was created\n"
	1270	else
	1271	printf "\n +++ directory for make depository:"
	1272	printf "\n $remote_md"
	1273	printf "\n cannot be created"
	1274	locat=local_depository_path; exit
	1275	fi
	1276	fi
	1277
	1278	# QUELLTEXT-DATEIEN AUS REPOSITORY INS DEPOSITORY KOPIEREN
	1279	echo " "
	1280	echo " *** updating sources in $remote_md"
	1281	cd $remote_md
	1282	cp $local_source_path/${mainprog}_sources.tar .
	1283	tar xf ${mainprog}_sources.tar
	1284
[40]	1285	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
	1286	echo " "
	1287	echo " *** execute \"make\" on local host"
[1]	1288
[40]	1289	make PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
	1290
	1291	if [[ $? != 0 ]]
[1]	1292	then
[40]	1293	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
	1294	if [[ $silent = false ]]
	1295	then
	1296	answer=dummy
	1297	printf "\n"
	1298	while [[ "$answer" != c && "$answer" != k ]]
	1299	do
	1300	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
	1301	read answer
	1302	if [[ "$answer" = l ]]
	1303	then
	1304	more ${remote_host}_last_make_protokoll
	1305	fi
	1306	done
	1307	if [[ $answer = k ]]
[1]	1308	then
[40]	1309	locat=user_abort; exit
[1]	1310	fi
	1311	fi
	1312	fi
	1313
	1314
[40]	1315	# NEUE VERSION AUF LOKALEM RECHNER ZUSAMMENPACKEN
	1316	printf "\n *** tar update on local host ..."
	1317	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
[1]	1318
[22]	1319
	1320	# COMPILE THE UTILITY PROGRAMS
[40]	1321	elif [[ $compile_utility_programs = true ]]
[22]	1322	then
	1323	printf "\n\n"
	1324	echo " *** compiling the utility programs ..."
	1325	cd ${local_source_path}/../UTIL
[35]	1326	make F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
[22]	1327	cd - > /dev/null
	1328	fi
	1329
[1]	1330	fi
	1331
	1332	fi
	1333	done
	1334
	1335
	1336	if [[ $host_found = false ]]
	1337	then
	1338	if [[ $host = all ]]
	1339	then
	1340	printf "\n +++ no hosts found in configuration file"
	1341	else
	1342	printf "\n +++ host \"$host\" not found in configuration file"
	1343	fi
	1344	locat=config_file; exit
	1345	fi
	1346
	1347
	1348
	1349	# ABSCHLIESSENDE ARBEITEN
	1350	rm -f hosts_found_in_config_file
	1351

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |