source: palm/trunk/SCRIPTS/mbuild @ 343

Last change on this file since 343 was 305, checked in by raasch, 15 years ago

bugfix in Makefile, default value of grid_matching changed to strict

  • Property svn:keywords set to Id Rev
File size: 48.3 KB
RevLine 
[1]1#!/bin/ksh
[66]2# mbuild - Programmuebersetzungsscript
[169]3# $Id: mbuild 305 2009-04-27 11:58:42Z maronga $
[1]4
5     # Prozedur zur Uebersetzung von Programmteilen mittels make-Mechanismus
6     # auf einem Remote-Rechner, ausgehend von Quellcode auf einem lokalen
7     # Rechner
8
9     # Folgende Probleme existieren unter Linux, wenn keine AT&T-Korn-Shell
10     # verwendet wird:
11     # Wertzuweisungen an Variablen innerhalb von DO-Schleifen werden nicht
12     # nach aussen weitergegeben. "while read line" funktioniert nicht
13     # innerhalb einer Pipe.
14
15     # letzte Aenderung:
16     # 06/05/02 - Siggi - Beginn der Entwicklung
17     # 12/06/02 - Siggi - Abschluss der Entwicklungsarbeiten
18     # 23/06/02 - Siggi - voerst kein make-clean, Abbruch bei batch-mode
19     # 24/07/02 - Siggi - Keine Verwendung der temporaeren Datei tmp_mbuild
20     #                    unter linux mehr noetig, da nun AT&T-Korn-Shell
21     #                    benutzt wird
22     # 12/09/02 - Siggi - ibmh (hanni.hlrn.de) validiert
23     # 19/12/02 - Siggi - ibmb validiert
24     # 05/02/03 - Siggi - hostname nobela included
25     # 04/03/03 - Siggi - host nech included
26     # 06/03/03 - Siggi - make_call_string is echoed without '' to
27     #                    file LAST_MAKE_CALL (otherwise error on NEC, because
28     #                    '' are part of compiler options
29     # 16/03/03 - Siggi - Two underscores are placed in front of every define
30     #                    string, in case that palm.f90 version contains
31     #                    such strings
32     # 16/04/03 - Siggi - First extensions for linux machines
33     # 24/06/03 - Siggi - host orkan included
34     # 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
35     # 24/07/03 - Siggi - host maestro admitted
36     # 06/08/03 - Siggi - host gregale admitted
37     # 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
38     # 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
39     # 08/01/04 - Siggi - additional preprocessor directive for ibm included
40     #                    (-D$OMP=OMP) in order to avoid problems with
41     #                    OMP_NUM_THREADS
42     # 09/01/04 - Siggi - action above cancelled
43     # 28/01/04 - Siggi - action above re-cancelled
44     # 08/03/04 - Siggi - host scirocco admitted
45     # 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
46     #                    the respective .f90 file is not listed in the makefile
47     #                    and deletion is demanded by the user
48     # 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
49     #                    due to error in ssh installation (otherwise a prompt
50     #                    for the password appears)
51     # 23/07/04 - Siggi - changes due to the new berni configuration
52     #                    (federation switch)
53     # 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
54     # 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
55     # 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
56     # 31/03/05 - Siggi - mbuild does not tar *.i files any more
57     # 24/04/05 - Siggi - netcdf support on lcmuk
58     # 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
59     # 12/05/05 - Siggi - netcdf support on ibm
60     #                    set OBJECT_MODE=64 for compiling on ibmb, ibmh
61     # 18/05/05 - Siggi - netcdf support on nec
62     # 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
63     # 23/05/05 - Siggi - netcdf support on ibms
64     # 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
65     # 30/06/05 - Siggi - netcdf support on bora
66     # 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
67     # 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
68     # 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
69     #                    host gfdl5 (ibmy) admitted
70     # 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
71     # 20/01/06 - Siggi - cpp directive for ibmy
72     # 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
73     # 10/02/06 - Siggi - modifications for scp on decalpha
74     # 13/04/06 - Siggi - ostria admitted
75     # 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
76     # 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
77     # 29/05/05 - Siggi - atmos (lcide) admitted
78     # 23/08/06 - Siggi - netcdf support for scirocco (notebook)
79     # 24/11/06 - Siggi - breva and levanto admitted
80     # 07/02/07 - Siggi - adapted for RIAM (neck)
[5]81     # 10/02/07 - Siggi - all hpmuk-related code removed
[40]82     # 02/03/07 - Siggi - compilation of utility programs and transfer of
[27]83     #                    scripts to remote hosts added (option -u)
[66]84     # 14/03/07 - Siggi - fimm admitted, revision number added to terminal
85     #                    output
[69]86     # 16/03/07 - Siggi - adjustments (netcdf) for lctit
87     #                    adjustments for running under pdksh, local ip-addres
88     #                    is not determined any more
[82]89     # 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
90     #                    from configuration file
91     #                    host identifier (local_host) is read from config file
[116]92     # 10/10/07 - Siggi - bugfix: handling of comment lines
[181]93     # 18/07/08 - Siggi - adapted for lcsgih
94     # 21/07/08 - Siggi - mainprog (executable) is added to the tar-file
95     #                    ({mainprog}_current_version)
[206]96     # 02/10/08 - Siggi - adapted for lcxt4
[215]97     # 14/11/08 - Siggi - update mechanism completely revised: source tarfile
98     #                    remains in source directory, one depository per block
[266]99     #                    (given in the config-file) is created, allways all
100     #                    files from the source directory are copied to the
101     #                    respective depository, no additional file checks are
102     #                    done any more (version 2.1)
[224]103     # 13/01/09 - Marcus- re-enable compilation more than once on lcmuk (as on
104     #                    other machines)
[266]105     # 21/03/09 - Siggi - -u copies also copies process_dvr_output and
106     #                    .dvrserver.config
[305]107     # 21/04/09 - Siggi - adjustments for new IBM at DKRZ, which is now ibmh
[1]108
109
110
111    # VARIABLENVEREINBARUNGEN + DEFAULTWERTE
[22]112 compile_utility_programs=false
[1]113 config_file=.mrun.config
[67]114 fimm=false
[1]115 host=all
116 host_found=false
117 locat=normal
118 makefile=""
119 remote_mode=interactive
120 scirocco=false
121 silent=false
122 suf=f90
123 update=false
[83]124 working_directory=`pwd`
[1]125
126 typeset -i  ih ihost=0
127
[66]128 typeset  -R30 calltime
[1]129 typeset  -L20 column1
130 typeset  -L50 column2
131 typeset  -L70 column3
[215]132 typeset  -L40 version="MBUILD  2.1  Rev$Rev: 305 $"
[1]133
134    # FEHLERBEHANDLUNG
135    # BEI EXIT:
[83]136 trap 'rm -rf  $working_directory/tmp_mbuild
[69]137       if [[ $locat != normal ]]
[1]138       then
139          printf "\n\n +++ mbuild killed \n\n"
140       else
141          printf "\n\n *** mbuild finished \n\n"
142       fi' exit
143
144
145    # BEI TERMINAL-BREAK:
[83]146 trap 'rm -rf  $working_directory/tmp_mbuild
[69]147       printf "\n\n +++ mbuild killed by \"^C\" \n\n"
[1]148       exit
149      ' 2
150
151
[215]152 tmp_mbuild=${working_directory}/tmp_mbuild
[1]153
154    # SHELLSCRIPT-OPTIONEN EINLESEN
[22]155 while  getopts  :c:h:m:rs:u  option
[1]156 do
157   case  $option  in
158       (c)   config_file=$OPTARG;;
159       (h)   host=$OPTARG;;
160       (m)   makefile=$OPTARG;;
161       (r)   remote_mode=batch;;
162       (s)   suf=$OPTARG;;
[22]163       (u)   compile_utility_programs=true;;
[1]164       (\?)  printf "\n  +++ unknown option $OPTARG \n";
165             locat=parameter; exit;;
166   esac
167 done
168
169
170
171    # BATCH-MODE IST ZUR ZEIT NICHT FUNKTIONSFAEHIG
172 if [[ $remote_mode = batch ]]
173 then
174    printf "\n  +++ sorry, batch mode does not work! \n"
175    locat=parameter; exit
176 fi
177
178
179
[82]180    # PRUEFEN, OB KONFIGURATIONS-DATEI VORHANDEN
181 if [[ ! -f $config_file ]]
182 then
183    printf "\n  +++ configuration file: "
184    printf "\n           $config_file"
185    printf "\n      does not exist"
186    locat=configuration; exit 
187 fi
188
189
190
[1]191    # LOKALEN RECHNER ERMITTELN
192 local_host_real_name=$(hostname)
[69]193# local_addres=$(nslookup `hostname` 2>&1 | grep "Address:" | tail -1 | awk '{print $2}')
194
[1]195
[82]196
197    # HOST-IDENTIFIER (local_host) AUS KONFIGURATIONSDATEI BESTIMMEN
198 line=""
[215]199 grep  "%host_identifier"  $config_file  >  $tmp_mbuild
[82]200 while read line
201 do
[116]202    if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
[82]203    then
204       HOSTNAME=`echo $line | cut -d" " -s -f2`
205       host_identifier=`echo $line | cut -d" " -s -f3`
[83]206       if [[ $local_host_real_name = $HOSTNAME ]]
[82]207       then
208          local_host=$host_identifier
209          break
210       fi
211    fi
[215]212 done < $tmp_mbuild
[82]213
214 if [[ "$local_host" = "" ]]
215 then
216    printf "\n  +++ no host identifier found in configuration file \"$config_file\""
217    printf "\n      for local host \"$local_host_real_name\"."
218    printf "\n      Please add line"
219    printf "\n      \"\%host_identifier $local_host_real_name <identifier>\""
220    printf "\n      to the configuration file."
221    locat=local_host; exit
222 fi
223
224
225
[1]226 [[ $local_host_real_name = scirocco ]]  &&  scirocco=true
[67]227 [[ $local_host_real_name = fimm.bccs.uib.no ]]  &&  fimm=true
[1]228
229
230
231 if [[ $local_host != ibms ]]
232 then
233    config_file=$PWD/$config_file
234 else
235    config_file=`pwd`/$config_file
236 fi
237
238
239 
240    # BENUTZERNAMEN AUF LOKALEM RECHNER AUS KONFIGURATIONSDATEI ERMITTELN
241 line=""
[215]242 grep  " $local_host" $config_file | grep "%remote_username"  >  $tmp_mbuild
[69]243 while read line
[1]244 do
[116]245    if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
[1]246    then
247       local_username=`echo $line | cut -d" " -s -f2`
248    fi
[215]249 done < $tmp_mbuild
[1]250
[82]251
[1]252 if [[ "$local_username" = "" ]]
253 then
254    printf "\n  +++ no user name found in configuration file"
255    printf "\n      for local host \"$local_host\" "
256    locat=config_file; exit
257 fi
258
259
[5]260    # LOKALEN QUELLTEXTPFAD ERMITTELN.
261    # ZUERST PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD FUER ALLE RECHNER
262    # VEREINBART WURDE.
263    # DAZU ZUNAECHST ALLE IN DER KONFIGURATIONSDATEI VEREINBARTEN GLOBALEN
264    # VARIABLEN SETZEN, WEIL DIESE EVTL. IN PFADNAMEN VERWENDET WERDEN
265 line=""
[215]266 grep "%" $config_file  >  $tmp_mbuild
[69]267 while read line
[5]268 do
[116]269    if [[ "$line" != ""  &&  "$(echo $line | cut -d" " -s -f3)" = ""  &&  $(echo $line | cut -c1) != "#" ]]
[1]270    then
[5]271       var=`echo $line | cut -d" " -s -f1 | cut -c2-`
272       value=`echo $line | cut -d" " -s -f2`
[8]273       eval export $var=\$value
[9]274#       eval echo \"   $var=\$$var \"   # AUSGABE ZU TESTZWECKEN
[1]275    fi
[215]276 done < $tmp_mbuild
[1]277
[5]278    # NUN PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD VEREINBART WURDE
[1]279 line=""
[215]280 grep "%source_path" $config_file  >  $tmp_mbuild
[69]281 while read line
[1]282 do
283    if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
284    then
285       if [[ "$(echo $line | cut -d" " -s -f3)" = "" ]]
286       then
287          global_source_path=`echo $line | cut -d" " -s -f2`
288       fi
289    fi
[215]290 done < $tmp_mbuild
[1]291
292 line=""
[215]293 grep  " $local_host" $config_file | grep "%source_path"  >  $tmp_mbuild
[69]294 while read line
[1]295 do
296    if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
297    then
298       local_source_path=`echo $line | cut -d" " -s -f2`
299    fi
[215]300 done < $tmp_mbuild
[1]301
302 if [[ "$local_source_path" = "" ]]
303 then
304    if [[ "$global_source_path" != "" ]]
305    then
306       local_source_path=$global_source_path
307    else
308       printf "\n  +++ no source path found in configuration file"
309       printf "\n      for local host \"$local_host\" "
310       printf "\n      please set \"\%source_path\" in configuration file"
311       locat=config_file; exit
312    fi
313 fi
314 eval local_source_path=$local_source_path
[8]315 eval local_source_path=$local_source_path
[1]316
317
[215]318
319    # GLOBALEN DEPOSITORY-PFAD ERMITTELN
[1]320 line=""
[215]321 grep "%depository_path" $config_file  >  $tmp_mbuild
[69]322 while read line
[1]323 do
324    if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
325    then
326       if [[ "$(echo $line | cut -d" " -s -f3)" = "" ]]
327       then
328          global_depository_path=`echo $line | cut -d" " -s -f2`
329       fi
330    fi
[215]331 done < $tmp_mbuild
[1]332
333
334
[5]335    # PRUEFEN, OB IN KONFIGURATIONSDATEI EIN HAUPTPROGRAMM
336    # VEREINBART WURDE
337 if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
338 then
339    printf "\n  +++ no main program or more than one main program defined"
340    printf "\n      in configuration file"
341    locat=configuration; exit
342 else
343    line=`grep "%mainprog" $config_file`
344    if [[ "$line" = ""  ||  $(echo $line | cut -c1) = "#" ]]
345    then
346       printf "\n  +++ no main program defined in configuration file"
347       locat=configuration; exit
348    fi
349    mainprog=`echo $line | cut -d" " -s -f2 | cut -d"." -f1`
350 fi
351
352
353
[1]354    # MAKEFILE vorhanden
355 [[ "$makefile" = "" ]]  &&  makefile=$local_source_path/Makefile
356 if [[ ! -f $makefile ]]
357 then
358    printf "\n  +++ makefile: "
359    printf "\n           $makefile"
360    printf "\n      does not exist"
361    locat=makefile; exit 
362 fi
363
364
365    # HEADER-AUSGABE (TEIL1: MELDUNGEN UEBER LOKALEN RECHNER)
366 calltime=$(date)
367 printf "\n"
368 printf "#------------------------------------------------------------------------# \n"
369 printf "| $version$calltime | \n"
370 printf "|                                                                        | \n"
371 column1="called on:"; column2=$local_host_real_name
372 printf "| $column1$column2 | \n"
373 column1="local username:"; column2=$local_username
374 printf "| $column1$column2 | \n"
375 column1="local IP-addres:"; column2=$local_addres
376 printf "| $column1$column2 | \n"
377 column1="config file:"; column2=$config_file
378 printf "| $column1$column2 | \n"
379 column1="makefile:"; column2=$makefile
380 printf "| $column1$column2 | \n"
381 column1="local source path:"; column2=$local_source_path
382 printf "| $column1$column2 | \n"
383 printf "#------------------------------------------------------------------------# \n"
384
385# printf "|                                                                        | \n"
386
387
[40]388 if [[ $compile_utility_programs = false ]]
389 then
[1]390
[40]391       # IN JEDEM FALL ALLEN DATEIEN WRITE-PERMIT GEBEN, DAMIT ES AUF
392       # DEN REMOTE-RECHNERN NICHT EVTL. ZU PROBLEMEN BEIM UEBERSCHREIBEN KOMMT
[215]393    cd  $local_source_path
394    printf "\n\n  *** tar of makefile and source files in $local_source_path" 
[40]395    tar -cf  ${mainprog}_sources.tar  Makefile  *.$suf
396    printf "\n"
[1]397
[40]398 fi
[1]399
400
[40]401
[1]402    # BESTAETIGUNG ZUM WEITERMACHEN EINHOLEN
403 if [[ $host = all ]]
404 then
405    printf "\n  *** updates will be made for ALL hosts found in"
406    printf "\n      the configuration file"
407 else
408    printf "\n  *** update will be made for host \"$host\" "
409 fi
410
411 if [[ $silent = false ]]
412 then
413    answer=dummy
414    printf "\n\n"
415    while [[ "$answer" != y  &&  "$answer" != Y  &&  "$answer" != n  &&  "$answer" != N ]]
416    do
417       printf " >>> continue (y/n) ?  "
418       read  answer
419    done
420    if [[ $answer = n  ||  $answer = N ]]
421    then
422       locat=user_abort; exit
423    fi
424 fi
425 
426 
427
428   
429    # GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
430    # VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
431 printf "\n  *** scanning configuration file for host(s) ..."
432
[215]433 grep  %fopts  $config_file  >  $tmp_mbuild
[69]434 while read line
[1]435 do
436       # KOMMENTARZEILEN UEBERSPRINGEN
437    [[ $(echo $line | cut -c1) = "#" ]]  &&  continue
438    (( ihost = ihost + 1 ))
439    hostline[$ihost]="$line"
[215]440 done < $tmp_mbuild
[1]441
442 
443 while (( ih < ihost ))
444 do
445
446    (( ih = ih + 1 ))
447
448       # REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
449       # NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
450       # SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
451    remote_host_string=`echo ${hostline[$ih]} | cut -d" " -s -f3-`
452    remote_host=`echo $remote_host_string | cut -d" " -f1`
453    if [[ $host != all ]]
454    then
455       [[ $remote_host != $host ]]  &&  continue
456    fi
457    host_found=true
458    condition1=`echo $remote_host_string | cut -d" " -s -f2`
459    if [[ $condition1 = $remote_host ]]
460    then
461       condition1=""
462    else
463       condition2=`echo $remote_host_string | cut -d" " -s -f3`
464    fi
465
[82]466    netcdf_inc=""
467    netcdf_lib=""
[1]468
469       # IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
470    case  $remote_host  in
[116]471        (lcmuk)          remote_addres=130.75.105.2;;
[181]472        (lcsgib)         remote_addres=130.73.232.102;;
[210]473        (lcsgih)         remote_addres=130.75.4.103;;
[83]474        (lctit)          remote_addres=172.17.75.161;;
[206]475        (lcxt4)          remote_addres=129.177.20.113;;
[83]476        (decalpha)       remote_addres=165.132.26.56;;
[305]477        (ibmh)           remote_addres=136.172.40.15;;
[83]478        (ibms)           remote_addres=150.183.5.101;;
479        (ibmy)           remote_addres=165.132.26.58;;
480        (nech)           remote_addres=136.172.44.192;;
481        (neck)           remote_addres=133.5.178.11;;
482        (ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
483        (*)              if [[ $local_host != $remote_host ]]
[1]484                         then
[83]485                            printf "\n  +++ remote host \"$remote_host\" unknown";
486                            printf "\n      please inform S. Raasch!"
[1]487                         fi;;
488    esac
489
490
491       # REMOTE-USERNAMEN ERMITTELN
492    line=""
[116]493    found=false
[215]494    grep  "$remote_host_string" $config_file | grep "%remote_username"  >  $tmp_mbuild
[69]495    while read line1
[1]496    do
[116]497
[1]498       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
499       then
500          line="$line1"
501       fi
[116]502
503       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
504       then
505          remote_username=`echo $line | cut -d" " -s -f2`
506          found=true
507       fi
508
[215]509    done < $tmp_mbuild
[1]510
[116]511    if [[ $found = false ]]
[1]512    then
513       printf "\n  +++ no remote username found in configuration file"
514       printf "\n      for \"$remote_host_string\" "
515       locat=config_file; exit
516    fi
517
518
519       # REMOTE-QUELLTEXTPFAD ERMITTELN
520    line=""
[54]521    remote_source_path=""
[215]522    grep  "$remote_host_string" $config_file | grep "%source_path"  >  $tmp_mbuild
[69]523    while read line1
[1]524    do
[116]525
[1]526       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
527       then
528          line="$line1"
529       fi
[116]530
531       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
532       then
533          remote_source_path=`echo $line | cut -d" " -s -f2`
534       fi
535
[215]536    done < $tmp_mbuild
[1]537
538    if [[ "$remote_source_path" = "" ]]
539    then
540       if [[ "$global_source_path" != "" ]]
541       then
542          remote_source_path=$global_source_path
543       else
544          printf "\n  +++ no source path found in configuration file"
545          printf "\n      for \"$remote_host_string\" "
546          locat=config_file; exit
547       fi
548    fi
549
[22]550    remote_ud=${remote_source_path}/../UTIL
[24]551    remote_ud=$(eval echo $remote_ud)
[1]552
[54]553
[1]554       # REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
[54]555    remote_md=""
[1]556    line=""
[215]557    grep  "$remote_host_string" $config_file | grep "%depository_path"  >  $tmp_mbuild
[69]558    while read line1
[1]559    do
[116]560
[1]561       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
562       then
563          line="$line1"
564       fi
[116]565
566       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
567       then
568          remote_md=`echo $line | cut -d" " -s -f2`
569       fi
570
[215]571    done < $tmp_mbuild
[1]572
573    if [[ "$remote_md" = "" ]]
574    then
575       if [[ "$global_depository_path" != "" ]]
576       then
577          remote_md=$global_depository_path
578       else
579          printf "\n  +++ no depository path found in configuration file"
580          printf "\n      for \"$remote_host_string\" "
581          printf "\n      please set \"\%depository_path\" in configuration file"
582          locat=config_file; exit
583       fi
584    fi
585
[8]586    remote_md=$(eval echo $remote_md)
[215]587    [[ "$condition1" != "" ]]  &&  remote_md=${remote_md}_$condition1
588    [[ "$condition2" != "" ]]  &&  remote_md=${remote_md}_$condition2
[1]589
[8]590
[1]591       # COMPILERNAMEN ERMITTELN
592    line=""
[116]593    found=false
[215]594    grep  "$remote_host_string" $config_file | grep "%compiler_name "  >  $tmp_mbuild
[69]595    while read line1
[1]596    do
[116]597
[1]598       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
599       then
600          line="$line1"
601       fi
[116]602
603       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
604       then
605          compiler_name=`echo $line | cut -d" " -s -f2`
606          found=true
607       fi
608
[215]609    done < $tmp_mbuild
[1]610
[116]611    if [[ $found = false ]]
[1]612    then
613       printf "\n  +++ no compiler name found in configuration file"
614       printf "\n      for \"$remote_host_string\" "
615       locat=config_file; exit
616    fi
617
618
[27]619       # BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
620       # SERIELLER COMPILERNAME ERMITTELT WERDEN
621    if [[ $(echo $remote_host_string | grep -c parallel) = 1 ]]
622    then
623       line=""
[116]624       found=false
[215]625       grep  "$remote_host_string" $config_file | grep "%compiler_name_ser"  >  $tmp_mbuild
[69]626       while read line1
[27]627       do
[116]628
[27]629          if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
630          then
631             line="$line1"
632          fi
[116]633
634          if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
635          then
636             compiler_name_ser=`echo $line | cut -d" " -s -f2`
637             found=true
638          fi
639
[215]640       done < $tmp_mbuild
[1]641
[116]642       if [[ $found = false ]]
[27]643       then
[28]644          printf "\n  +++ no serial compiler name found in configuration file"
[27]645          printf "\n      for \"$remote_host_string\" "
646          locat=config_file; exit
647       fi
648    else
649       compiler_name_ser=$compiler_name
650    fi
651
652
653
[82]654       # PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
655    line=""
[116]656    found=false
[215]657    grep  "$remote_host_string" $config_file | grep "%cpp_options"  >  $tmp_mbuild
[82]658    while read line1
659    do
[116]660
[82]661       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
662       then
663          line="$line1"
664       fi
[116]665
666       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
667       then
668             # EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
669          cpp_options=`echo $line | cut -d" " -s -f2 | sed 's/::/%DUM%/g' | sed 's/:/ /g' | sed 's/%DUM%/:/g'`
670          found=true
671       fi
672
[215]673    done < $tmp_mbuild
[116]674
675    if [[ $found = false ]]
[82]676    then
677       printf "\n  +++ no preprocessor options found in configuration file"
678       printf "\n      for \"$remote_host_string\" "
679       locat=config_file; exit
680    fi
681
[116]682
[82]683       # RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
684    for  string  in  $remote_host_string
685    do
686       if [[ $(echo $remote_host | cut -c1-2) = lc  &&  $(echo $string | cut -c1-2) = lc ]]
687       then
688          cpp_options="$cpp_options -D__lc "
[83]689       elif [[ $(echo $remote_host | cut -c1-3) = ibm  &&  $(echo $string | cut -c1-3) = ibm ]]
690       then
691          cpp_options="${cpp_options},-D__ibm"
692       elif [[ $(echo $remote_host | cut -c1-3) = nec  &&  $(echo $string | cut -c1-3) = nec ]]
693       then
694          cpp_options="${cpp_options} -D__nec"
[82]695       else
[83]696          if [[ $(echo $remote_host | cut -c1-3) = ibm ]]
697          then
698             cpp_options="${cpp_options},-D__$string"
699          else
700             cpp_options="$cpp_options -D__$string "
701          fi
[82]702       fi
703    done
704
705
706
707       # NETCDF-OPTIONEN ERMITTELN
708    line=""
[215]709    grep  "$remote_host_string" $config_file | grep "%netcdf_inc"  >  $tmp_mbuild
[82]710    while read line1
711    do
[116]712
[82]713       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
714       then
715          line="$line1"
716       fi
[116]717
718       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
719       then
720             # EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
721          netcdf_inc=`echo $line | cut -d" " -s -f2 | sed 's/::/%DUM%/g' | sed 's/:/ /g' | sed 's/%DUM%/:/g'`
722       fi
723
[215]724    done < $tmp_mbuild
[82]725
726    line=""
[215]727    grep  "$remote_host_string" $config_file | grep "%netcdf_lib"  >  $tmp_mbuild
[82]728    while read line1
729    do
[116]730
[82]731       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
732       then
733          line="$line1"
734       fi
[116]735
736       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
737       then
738             # EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
739          netcdf_lib=`echo $line | cut -d" " -s -f2 | sed 's/::/%DUM%/g' | sed 's/:/ /g' | sed 's/%DUM%/:/g'`
740       fi
741
[215]742    done < $tmp_mbuild
[82]743
744
745
[1]746       # COMPILEROPTIONEN ERMITTELN
747    line=""
[116]748    found=false
[215]749    grep  "$remote_host_string" $config_file | grep "%fopts"  >  $tmp_mbuild
[69]750    while read line1
[1]751    do
[116]752
[1]753       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
754       then
755          line="$line1"
756       fi
[116]757
758       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
759       then
760             # EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
761          compiler_options=`echo $line | cut -d" " -s -f2 | sed 's/::/%DUM%/g' | sed 's/:/ /g' | sed 's/%DUM%/:/g'`
762          found=true
763
764             # NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
765          compiler_options="$compiler_options $netcdf_inc"
766       fi
767
[215]768    done < $tmp_mbuild
[116]769
770    if [[ $found = false ]]
[1]771    then
772       printf "\n  +++ no compiler options found in configuration file"
773       printf "\n      for \"$remote_host_string\" "
774       locat=config_file; exit
775    fi
[82]776
[1]777
778
[221]779       # MPI LIBRARY ERMITTELN
780    line=""
781    found=false
782    grep  "$remote_host_string" $config_file | grep "%mpilib"  >  $tmp_mbuild
783    while read line1
784    do
785
786       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
787       then
788          line="$line1"
789       fi
790
791       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
792       then
793             # EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
794          mpilib=`echo $line | cut -d" " -s -f2`
795          found=true
796       fi
797
798    done < $tmp_mbuild
799
800    [[ $found = false ]]  &&  mpilib=mpt
801
802
803
804
[1]805       # LADER-OPTIONEN ERMITTELN
806    line=""
[116]807    found=false
[215]808    grep  "$remote_host_string" $config_file | grep "%lopts"  >  $tmp_mbuild
[69]809    while read line1
[1]810    do
[116]811
[1]812       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
813       then
814          line="$line1"
815       fi
[116]816
817       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
818       then
819             # EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
820          loader_options=`echo $line | cut -d" " -s -f2 | sed 's/::/%DUM%/g' | sed 's/:/ /g' | sed 's/%DUM%/:/g'`
821          found=true
822
823             # NETCDF-LIBRARY HINZUFUEGEN
824          loader_options="$loader_options $netcdf_lib"
825       fi
826
[215]827    done < $tmp_mbuild
[1]828
[116]829    if [[ $found = false ]]
[1]830    then
831       printf "\n  +++ no loader options found in configuration file"
832       printf "\n      for \"$remote_host_string\" "
833       locat=config_file; exit
834    fi
[82]835
[1]836
837    printf "\n\n#------------------------------------------------------------------------# \n"
838    if [[ $remote_host = $local_host ]]
839    then
840       column1="remote_host:"; column2="$remote_host (= local host!)"
841    else
842       column1="remote_host:"; column2=$remote_host
843    fi
844    printf "| $column1$column2 | \n"
845    printf "|                                                                        | \n"
846    column1="conditions:"; column2="$condition1 $condition2"
847    printf "| $column1$column2 | \n"
848    column1="make depository:"; column2=$remote_md
849    printf "| $column1$column2 | \n"
[215]850    line=$(echo "$remote_md" | cut -c51-)
851    while [[ "$line" != "" ]]
852    do
853       column1=""
854       column2=$line
855       printf "| $column1$column2 | \n"
856       line=$(echo "$line" | cut -c51-)
857    done
[25]858    if [[ $compile_utility_programs = true ]]
859    then
860       column1="utility directory:"; column2=$remote_ud
861       printf "| $column1$column2 | \n"
862    fi
[1]863    column1="username:"; column2=$remote_username
864    printf "| $column1$column2 | \n"
865    column1="addres:"; column2=$remote_addres
866    printf "| $column1$column2 | \n"
867    column1="compiler:"; column2=$compiler_name
868    printf "| $column1$column2 | \n"
[28]869    if [[ $compile_utility_programs = true ]]
870    then
871       column1="serial compiler:"; column2=$compiler_name_ser
872       printf "| $column1$column2 | \n"
873    fi
[1]874    column1="cpp options:"; column2=$cpp_options
875    printf "| $column1$column2 | \n"
876    line=$(echo "$cpp_options" | cut -c51-)
877    while [[ "$line" != "" ]]
878    do
879       column1=""
880       column2=$line
881       printf "| $column1$column2 | \n"
882       line=$(echo "$line" | cut -c51-)
883    done
884    column1="compiler options:"; column2=$compiler_options
885    printf "| $column1$column2 | \n"
886    line=$(echo "$compiler_options" | cut -c51-)
887    while [[ "$line" != "" ]]
888    do
889       column1=""
890       column2=$line
891       printf "| $column1$column2 | \n"
892       line=$(echo "$line" | cut -c51-)
893    done
[221]894    if [[ $( echo $remote_host | cut -c1-5 ) = lcsgi ]]
895    then
896       column1="mpi library:"; column2=$mpilib
897       printf "| $column1$column2 | \n"
898    fi
[1]899    column1="loader options:"; column2=$loader_options
900    printf "| $column1$column2 | \n"
901    line=$(echo "$loader_options" | cut -c51-)
902    while [[ "$line" != "" ]]
903    do
904       column1=""
905       column2=$line
906       printf "| $column1$column2 | \n"
907       line=$(echo "$line" | cut -c51-)
908    done
909    printf "#------------------------------------------------------------------------# \n"
910
911    if [[ $silent = false ]]
912    then
913       answer=dummy
914       printf "\n\n"
915       while [[ "$answer" != y  &&  "$answer" != Y  && "$answer" != c  &&  "$answer" != C  && "$answer" != s  &&  "$answer" != S  &&  "$answer" != a  &&  "$answer" != A ]]
916       do
917          printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ?  "
918          read  answer
919       done
920       if [[ $answer = a  ||  $answer = A ]]
921       then
922          locat=user_abort; exit
923       fi
924       if [[ $answer = c  ||  $answer = C ]]
925       then
926          silent=false
927       fi
928       if [[ $answer = s  ||  $answer = S ]]
929       then
930          continue
931       fi
932    fi
933
934
935    if [[ $remote_mode = batch ]]
936    then
937
938          # BATCH-JOB PARAMETER SETZEN
939       case  $remote_host  in
940           (t3eb)           queue=berte; memory=60; cputime=1000; xoption="-X 0";;
941           (t3eh)           queue=comp_t3e; memory=60; cputime=360;;
942           (t3ej2)          queue=normal; memory=60; cputime=1000; xoption="-X 0";;
[5]943           (t3ej5|ground.yonsei.ac.kr)  printf "\n  --- remote host \"$remote_host\" does not allow batch jobs"; continue;;
[1]944       esac
945
946
947          # BATCH-JOB ZUSAMMENSTELLEN
948       printf "\n  *** creating batch-job for remote host"
949       echo " "  >  mbuild_job
950
951          # AUF CRAY-RECHNERN IN JUELICH WIRD KEIN BENUTZER-PROFILE AUSGEFUEHRT
952          # DIES WIRD HIER GETAN, UM PFADE USW. ZU SETZEN
953       if [[ $remote_host = t3ej2 ]]
954       then
955          echo "set +vx"                       >>  mbuild_job
956          echo ". .profile"                    >>  mbuild_job
957          echo "set -x"                        >>  mbuild_job
958       fi
959
960          # AUF CRAY-RECHNERN GELADENE MODULE AUFLISTEN
961       if [[ $host = t3eb  || $host = t3eh  ||  $host = t3ej2 ]]
962       then
963          echo "module list"                   >>  mbuild_job
964       fi
965
966
967          # WECHSEL IN TEMPORAERES VERZEICHNIS
968       echo "cd ${remote_md}"  >>  mbuild_job
969
970
971          # AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
972       echo  "scp  ${local_username}@${local_addres}:~/modell/code_3dp/palm_current_version/${mainprog}_sources.tar  ${mainprog}_sources.tar"  >>  mbuild_job
973#       echo  "[[ \$? != 0 ]]  &&  (echo "+++ scp failed"; exit)"  >>  mbuild_job
974
975
976          # FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
977       echo  "[[ -f ${mainprog}_current_version.tar ]]  &&  tar -xvf  ${mainprog}_current_version.tar"  >>  mbuild_job
978
979
980          # AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
981       echo  "tar -xvf  ${mainprog}_sources.tar"              >>  mbuild_job
982
983
984          # MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
985       echo  "make  PROG=$mainprog  F90=$compiler_name  COPT=\"$cpp_options\"  F90FLAGS=\"$compiler_options\"  LDFLAGS=\"$loader_options\" "  >>  mbuild_job
986       echo  "chmod  u+w  *"                                  >>  mbuild_job
987
988          # NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
989       echo  "tar -cvf  ${mainprog}_current_version.tar  *.f90  *.o"  >>  mbuild_job
990
991
992          # AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
993       echo  "make  clean"                                    >>  mbuild_job
994       echo  "rm ${mainprog}_sources.tar"                     >>  mbuild_job
995       echo  "rm *.f90 Makefile"                              >>  mbuild_job
996
997
998
999          # JOB MITTELS SUBJOB STARTEN
1000       printf "\n  *** sending batch job to remote host"
1001#       subjob  $xoption  -h $remote_host  -q $queue  -m $memory  -t $cputime  -v  mbuild_job
1002
1003
1004          # JOBFILE LOESCHEN
1005#       rm  aljob
1006
1007    else
1008
1009       if [[ $remote_host != $local_host ]]
1010       then
1011
[40]1012          if [[ $compile_utility_programs = false ]]
[1]1013          then
1014
[40]1015                # AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1016                # FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1017             echo "  *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
1018             if [[ $remote_host != lctit ]]
1019             then
1020                ssh  ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]]  &&  (echo \"  *** ${remote_md} will be created\"; mkdir -p  ${remote_md})"
1021             else
[206]1022                   # TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
[40]1023                   # MIT SSH, DESHALB AUFRUF PER PIPE
1024                print "[[ ! -d ${remote_md} ]]  &&  (echo \"  *** ${remote_md} will be created\"; mkdir -p  ${remote_md})"  |  ssh ${remote_username}@${remote_addres}  2>&1
1025             fi
1026             if [[ $local_host = decalpha ]]
1027             then
[206]1028                   # DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
[40]1029                   # IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1030                   # KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1031                remote_md=`echo $remote_md | sed 's/\$HOME\///'`
[215]1032                /bin/scp  ${local_source_path}/${mainprog}_sources.tar  ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
[40]1033             else
[215]1034                scp  ${local_source_path}/${mainprog}_sources.tar  ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
[40]1035             fi
[1]1036
1037
1038
[40]1039                # FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
1040             echo "  *** untar previous update on remote host, if existing"
1041             if [[ $remote_host != lctit ]]
1042             then
1043                ssh  ${remote_username}@${remote_addres}  "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]]  &&  tar -xf  ${mainprog}_current_version.tar"
1044             else
[206]1045                   # TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
[40]1046                   # MIT SSH, DESHALB AUFRUF PER PIPE
1047                print  "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]]  &&  tar -xf  ${mainprog}_current_version.tar"  |  ssh  ${remote_username}@${remote_addres}  2>&1
1048             fi
[1]1049
1050
[40]1051                # AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1052             echo "  *** untar actual sources on remote host"
1053             if [[ $remote_host != lctit ]]
1054             then
1055                ssh  ${remote_username}@${remote_addres}  "cd ${remote_md}; tar -xf  ${mainprog}_sources.tar"
1056             else
[206]1057                   # TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
[40]1058                   # MIT SSH, DESHALB AUFRUF PER PIPE
1059                print  "cd ${remote_md}; tar -xf  ${mainprog}_sources.tar"  |  ssh  ${remote_username}@${remote_addres}  2>&1
1060             fi
[1]1061
1062
[40]1063                # MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1064                # KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1065                # BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1066                # Z.B. DIE PFADE ZUM COMPILER)
1067             echo "  *** execute \"make\" on remote host"
[1]1068
[40]1069             if [[ $remote_host = nech ]]
1070             then
1071                make_call_string="sxmake  PROG=$mainprog  F90=$compiler_name  COPT=\"$cpp_options\"  F90FLAGS=\"$compiler_options\"  LDFLAGS=\"$loader_options\" "
1072             else
1073                make_call_string="make  PROG=$mainprog  F90=$compiler_name  COPT=\"$cpp_options\"  F90FLAGS=\"$compiler_options\"  LDFLAGS=\"$loader_options\" "
1074             fi
1075
1076             if [[ $remote_host = t3eh ]]
1077             then
[1]1078       
[40]1079                print "xterm\nexit\n cd ${remote_md}; make  PROG=$mainprog  F90=$compiler_name  COPT=\"$cpp_options\"  F90FLAGS=\"$compiler_options\"  LDFLAGS=\"$loader_options\" " | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
[1]1080
[40]1081             elif [[ $remote_host = t3ej2  ||  $remote_host = ibms  ||  $remote_host = ibmy ]]
1082             then
[1]1083
[40]1084                ssh  ${remote_username}@${remote_addres}  "cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 | tee ${remote_host}_last_make_protokoll
[1]1085
[305]1086             elif [[ $remote_host = ibmh ]]
[40]1087             then
[1]1088
[40]1089                print "export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
[1]1090
[181]1091             elif [[ $remote_host = lcsgib  ||  $remote_host = lcsgih ]]
1092             then
1093
[221]1094                print ". /usr/share/modules/init/bash; module load $mpilib; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
[196]1095#                print ". /usr/share/modules/init/bash; module load mvapich2/1.2rc1-intel; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1096#                print ". /usr/share/modules/init/bash; module load mvapich2; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
[181]1097
[40]1098             elif [[ $remote_host = lctit ]]
1099             then
[1]1100
[40]1101                echo  " "  >  ${remote_host}_last_make_protokoll
1102                while [[ $(cat ${remote_host}_last_make_protokoll | grep -c "Forwarding to N1GE") = 0 ]]
1103                do
1104                   print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1105                done
[1]1106
[206]1107             elif [[ $remote_host = lcxt4 ]]
1108             then
1109
1110                print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1111
[40]1112             else
[1]1113
[40]1114                print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
[1]1115
[40]1116             fi
[1]1117
[40]1118             if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
[1]1119             then
[40]1120                printf "\a\n  +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1121                if [[ $silent = false ]]
1122                then
1123                   answer=dummy
1124                   printf "\n"
1125                   while [[ "$answer" != c  &&  "$answer" != k ]]
1126                   do
1127                      printf "  >>> continue / list errors / kill mbuild (c/l/k) ? "
1128                      read  answer
1129                      if [[ "$answer" = l ]]
1130                      then
1131                         more ${remote_host}_last_make_protokoll
1132                      fi
1133                   done
1134                   if [[ $answer = k ]]
[1]1135                   then
[40]1136                      locat=user_abort; exit
[1]1137                   fi
1138                fi
1139             fi
1140
1141
1142
[40]1143                # NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1144             printf "\n  *** tar update on remote host ..."
1145             if [[ $remote_host != lctit ]]
1146             then
[181]1147                ssh  ${remote_username}@${remote_addres}  "cd ${remote_md}; chmod u+w *; tar -cf  ${mainprog}_current_version.tar  ${mainprog}  *.f90 *.o *.mod"
[40]1148             else
[206]1149                   # TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
[40]1150                   # MIT SSH, DESHALB AUFRUF PER PIPE
[181]1151                print  "cd ${remote_md}; chmod u+w *; tar -cf  ${mainprog}_current_version.tar  ${mainprog}  *.f90 *.o *.mod"  |  ssh  ${remote_username}@${remote_addres}  2>&1
[40]1152             fi
[1]1153
1154
[40]1155                # AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1156#             printf "\n  *** \"make clean\" on remote host ..."
1157#             ssh  ${remote_username}@${remote_addres}  "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
1158#             printf "\n"
[1]1159
1160
[25]1161
1162
[22]1163             # GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
1164             # AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1165             # FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
[40]1166          elif [[ $compile_utility_programs = true ]]
[22]1167          then
1168
[24]1169             printf "\n\n"
[27]1170             echo "  *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
1171             cd  ${local_source_path}/../SCRIPTS
[22]1172
1173             if [[ $remote_host != lctit ]]
1174             then
[24]1175                ssh  ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]]  &&  (echo \"  *** ${remote_ud} will be created\"; mkdir -p  ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]]  &&  (echo \"  *** ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
[22]1176             else
[206]1177                   # TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
[22]1178                   # MIT SSH, DESHALB AUFRUF PER PIPE
[24]1179                print "[[ ! -d ${remote_ud} ]]  &&  (echo \"  *** ${remote_ud} will be created\"; mkdir -p  ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]]  &&  (echo \"  *** ${remote_ud}/../SCRIPTS will be created\"; mkdir -p  ${remote_ud}/../SCRIPTS)"  |  ssh ${remote_username}@${remote_addres}  2>&1
[22]1180             fi
1181
[27]1182                # KOPIEREN DER SCRIPTE
[22]1183             if [[ $local_host = decalpha ]]
1184             then
[206]1185                   # DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
[22]1186                   # IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1187                   # KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1188                remote_ud=`echo $remote_ud | sed 's/\$HOME\///'`
[266]1189                /bin/scp  batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob  ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS  >  /dev/null
[27]1190             else
[266]1191                scp  batch_scp mbuild mrun process_dvr_output .dvrserver.config subjob  ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS  >  /dev/null
[27]1192             fi
1193
1194             cd  -  > /dev/null
1195             cd  ${local_source_path}/../UTIL
1196
1197
1198                # KOPIEREN DER UTILITY-PROGRAMME
1199             if [[ $local_host = decalpha ]]
1200             then
[206]1201                   # DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
[27]1202                   # IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1203                   # KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1204                remote_ud=`echo $remote_ud | sed 's/\$HOME\///'`
[24]1205                /bin/scp  Makefile  *.f90  ${remote_username}@${remote_addres}:${remote_ud}  >  /dev/null
[22]1206             else
[24]1207                scp  Makefile  *.f90  ${remote_username}@${remote_addres}:${remote_ud}  >  /dev/null
[22]1208             fi
1209
1210
1211
1212                # MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1213                # KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1214                # BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1215                # Z.B. DIE PFADE ZUM COMPILER)
1216             echo "  *** execute \"make\" on remote host"
1217
1218             if [[ $remote_host = nech ]]
1219             then
[27]1220                make_call_string="sxmake  F90=$compiler_name  F90_SER=$compiler_name_ser  COPT=\"$cpp_options\"  F90FLAGS=\"$compiler_options\"  LDFLAGS=\"$loader_options\" "
[22]1221             else
[27]1222                make_call_string="make  F90=$compiler_name  F90_SER=$compiler_name_ser  COPT=\"$cpp_options\"  F90FLAGS=\"$compiler_options\"  LDFLAGS=\"$loader_options\" "
[22]1223             fi
1224
1225             if [[ $remote_host = ibms  ||  $remote_host = ibmy ]]
1226             then
1227
[25]1228                ssh  ${remote_username}@${remote_addres}  "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
[22]1229
[305]1230             elif [[ $remote_host = ibmh ]]
[22]1231             then
1232
[25]1233                print "export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres}
[22]1234
1235             elif [[ $remote_host = lctit ]]
1236             then
1237
1238                echo  " "  >  ${remote_host}_last_make_protokoll
1239                while [[ $(cat ${remote_host}_last_make_protokoll | grep -c "Forwarding to N1GE") = 0 ]]
1240                do
1241                   print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1242                done
1243
1244             else
1245
1246                print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1247
1248             fi
1249
1250          fi    # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
1251
[75]1252          rm -rf  ${remote_host}_last_make_protokoll
[22]1253
[1]1254       else
1255
[40]1256          if [[ $compile_utility_programs = false ]]
1257          then
[1]1258
[215]1259                # DEPOSITORY VERZEICHNIS ERZEUGEN, FALLS NOCH NICHT VORHANDEN
1260             eval remote_md=$remote_md
1261             if [[ ! -d $remote_md ]]
1262             then
1263                if  mkdir $remote_md
1264                then
1265                   printf "\n\n  *** directory for make depository:"
1266                   printf "\n           $remote_md"
1267                   printf "\n      was created\n"
1268                else
1269                   printf "\n  +++ directory for make depository:"
1270                   printf "\n           $remote_md"
1271                   printf "\n      cannot be created"
1272                   locat=local_depository_path; exit
1273                fi
1274             fi
1275
1276                # QUELLTEXT-DATEIEN AUS REPOSITORY INS DEPOSITORY KOPIEREN
1277             echo " "
1278             echo "  *** updating sources in $remote_md"
1279             cd  $remote_md
1280             cp  $local_source_path/${mainprog}_sources.tar  .
1281             tar xf  ${mainprog}_sources.tar
1282
[40]1283                # MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
1284             echo " "
1285             echo "  *** execute \"make\" on local host"
[1]1286
[40]1287             make  PROG=$mainprog  F90=$compiler_name  COPT="$cpp_options"  F90FLAGS="$compiler_options"  LDFLAGS="$loader_options"  2>&1 | tee ${remote_host}_last_make_protokoll
1288
1289             if [[ $? != 0 ]]
[1]1290             then
[40]1291                printf "\a\n  +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1292                if [[ $silent = false ]]
1293                then
1294                   answer=dummy
1295                   printf "\n"
1296                   while [[ "$answer" != c  &&  "$answer" != k ]]
1297                   do
1298                      printf "  >>> continue / list errors / kill mbuild (c/l/k) ? "
1299                      read  answer
1300                      if [[ "$answer" = l ]]
1301                      then
1302                         more ${remote_host}_last_make_protokoll
1303                      fi
1304                   done
1305                   if [[ $answer = k ]]
[1]1306                   then
[40]1307                      locat=user_abort; exit
[1]1308                   fi
1309                fi
1310             fi
1311
1312
[40]1313                # NEUE VERSION AUF LOKALEM RECHNER ZUSAMMENPACKEN
1314             printf "\n  *** tar update on local host ..."
1315             tar -cf  ${mainprog}_current_version.tar  *.$suf *.o *.mod
[1]1316
[22]1317
1318             # COMPILE THE UTILITY PROGRAMS
[40]1319          elif [[ $compile_utility_programs = true ]]
[22]1320          then
1321             printf "\n\n"
1322             echo "  *** compiling the utility programs ..."
1323             cd ${local_source_path}/../UTIL
[35]1324             make  F90=$compiler_name  F90_SER=$compiler_name_ser  COPT="$cpp_options"  F90FLAGS="$compiler_options"  LDFLAGS="$loader_options"
[22]1325             cd  -  > /dev/null
1326          fi
1327
[1]1328       fi
1329
1330    fi
1331 done
1332
1333
1334 if [[ $host_found = false ]]
1335 then
1336    if [[ $host = all ]]
1337    then
1338       printf "\n  +++ no hosts found in configuration file"
1339    else
1340       printf "\n  +++ host \"$host\" not found in configuration file"
1341    fi
1342    locat=config_file; exit
1343 fi
1344
1345
1346
1347    # ABSCHLIESSENDE ARBEITEN
1348 rm -f  hosts_found_in_config_file
1349
Note: See TracBrowser for help on using the repository browser.