Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 227

Last change on this file since 227 was 224, checked in by letzel, 16 years ago
mbuild: re-enable compilation more than once on lcmuk (as on other machines)
Property svn:keywords set to `Id Rev`
File size: 48.1 KB

Rev	Line
[1]	1	#!/bin/ksh
[66]	2	# mbuild - Programmuebersetzungsscript
[169]	3	# $Id: mbuild 224 2009-01-13 17:58:15Z raasch $
[1]	4
	5	# Prozedur zur Uebersetzung von Programmteilen mittels make-Mechanismus
	6	# auf einem Remote-Rechner, ausgehend von Quellcode auf einem lokalen
	7	# Rechner
	8
	9	# Folgende Probleme existieren unter Linux, wenn keine AT&T-Korn-Shell
	10	# verwendet wird:
	11	# Wertzuweisungen an Variablen innerhalb von DO-Schleifen werden nicht
	12	# nach aussen weitergegeben. "while read line" funktioniert nicht
	13	# innerhalb einer Pipe.
	14
	15	# letzte Aenderung:
	16	# 06/05/02 - Siggi - Beginn der Entwicklung
	17	# 12/06/02 - Siggi - Abschluss der Entwicklungsarbeiten
	18	# 23/06/02 - Siggi - voerst kein make-clean, Abbruch bei batch-mode
	19	# 24/07/02 - Siggi - Keine Verwendung der temporaeren Datei tmp_mbuild
	20	# unter linux mehr noetig, da nun AT&T-Korn-Shell
	21	# benutzt wird
	22	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) validiert
	23	# 19/12/02 - Siggi - ibmb validiert
	24	# 05/02/03 - Siggi - hostname nobela included
	25	# 04/03/03 - Siggi - host nech included
	26	# 06/03/03 - Siggi - make_call_string is echoed without '' to
	27	# file LAST_MAKE_CALL (otherwise error on NEC, because
	28	# '' are part of compiler options
	29	# 16/03/03 - Siggi - Two underscores are placed in front of every define
	30	# string, in case that palm.f90 version contains
	31	# such strings
	32	# 16/04/03 - Siggi - First extensions for linux machines
	33	# 24/06/03 - Siggi - host orkan included
	34	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
	35	# 24/07/03 - Siggi - host maestro admitted
	36	# 06/08/03 - Siggi - host gregale admitted
	37	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
	38	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
	39	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
	40	# (-D$OMP=OMP) in order to avoid problems with
	41	# OMP_NUM_THREADS
	42	# 09/01/04 - Siggi - action above cancelled
	43	# 28/01/04 - Siggi - action above re-cancelled
	44	# 08/03/04 - Siggi - host scirocco admitted
	45	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
	46	# the respective .f90 file is not listed in the makefile
	47	# and deletion is demanded by the user
	48	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
	49	# due to error in ssh installation (otherwise a prompt
	50	# for the password appears)
	51	# 23/07/04 - Siggi - changes due to the new berni configuration
	52	# (federation switch)
	53	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
	54	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
	55	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
	56	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
	57	# 24/04/05 - Siggi - netcdf support on lcmuk
	58	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
	59	# 12/05/05 - Siggi - netcdf support on ibm
	60	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
	61	# 18/05/05 - Siggi - netcdf support on nec
	62	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
	63	# 23/05/05 - Siggi - netcdf support on ibms
	64	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
	65	# 30/06/05 - Siggi - netcdf support on bora
	66	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
	67	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
	68	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
	69	# host gfdl5 (ibmy) admitted
	70	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
	71	# 20/01/06 - Siggi - cpp directive for ibmy
	72	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
	73	# 10/02/06 - Siggi - modifications for scp on decalpha
	74	# 13/04/06 - Siggi - ostria admitted
	75	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
	76	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
	77	# 29/05/05 - Siggi - atmos (lcide) admitted
	78	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
	79	# 24/11/06 - Siggi - breva and levanto admitted
	80	# 07/02/07 - Siggi - adapted for RIAM (neck)
[5]	81	# 10/02/07 - Siggi - all hpmuk-related code removed
[40]	82	# 02/03/07 - Siggi - compilation of utility programs and transfer of
[27]	83	# scripts to remote hosts added (option -u)
[66]	84	# 14/03/07 - Siggi - fimm admitted, revision number added to terminal
	85	# output
[69]	86	# 16/03/07 - Siggi - adjustments (netcdf) for lctit
	87	# adjustments for running under pdksh, local ip-addres
	88	# is not determined any more
[82]	89	# 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
	90	# from configuration file
	91	# host identifier (local_host) is read from config file
[116]	92	# 10/10/07 - Siggi - bugfix: handling of comment lines
[181]	93	# 18/07/08 - Siggi - adapted for lcsgih
	94	# 21/07/08 - Siggi - mainprog (executable) is added to the tar-file
	95	# ({mainprog}_current_version)
[206]	96	# 02/10/08 - Siggi - adapted for lcxt4
[215]	97	# 14/11/08 - Siggi - update mechanism completely revised: source tarfile
	98	# remains in source directory, one depository per block
	99	# (given in the config-file) is created, always all files
	100	# from the source directory are copied to the respective
	101	# depository, no additional file checks are done any more
	102	# (version 2.1)
[224]	103	# 13/01/09 - Marcus- re-enable compilation more than once on lcmuk (as on
	104	# other machines)
[1]	105
	106
	107
	108	# VARIABLENVEREINBARUNGEN + DEFAULTWERTE
[22]	109	compile_utility_programs=false
[1]	110	config_file=.mrun.config
[67]	111	fimm=false
[1]	112	host=all
	113	host_found=false
	114	locat=normal
	115	makefile=""
	116	remote_mode=interactive
	117	scirocco=false
	118	silent=false
	119	suf=f90
	120	update=false
[83]	121	working_directory=`pwd`
[1]	122
	123	typeset -i ih ihost=0
	124
[66]	125	typeset -R30 calltime
[1]	126	typeset -L20 column1
	127	typeset -L50 column2
	128	typeset -L70 column3
[215]	129	typeset -L40 version="MBUILD 2.1 Rev$Rev: 224 $"
[1]	130
	131	# FEHLERBEHANDLUNG
	132	# BEI EXIT:
[83]	133	trap 'rm -rf $working_directory/tmp_mbuild
[69]	134	if [[ $locat != normal ]]
[1]	135	then
	136	printf "\n\n +++ mbuild killed \n\n"
	137	else
	138	printf "\n\n *** mbuild finished \n\n"
	139	fi' exit
	140
	141
	142	# BEI TERMINAL-BREAK:
[83]	143	trap 'rm -rf $working_directory/tmp_mbuild
[69]	144	printf "\n\n +++ mbuild killed by \"^C\" \n\n"
[1]	145	exit
	146	' 2
	147
	148
[215]	149	tmp_mbuild=${working_directory}/tmp_mbuild
[1]	150
	151	# SHELLSCRIPT-OPTIONEN EINLESEN
[22]	152	while getopts :c:h:m:rs:u option
[1]	153	do
	154	case $option in
	155	(c) config_file=$OPTARG;;
	156	(h) host=$OPTARG;;
	157	(m) makefile=$OPTARG;;
	158	(r) remote_mode=batch;;
	159	(s) suf=$OPTARG;;
[22]	160	(u) compile_utility_programs=true;;
[1]	161	(\?) printf "\n +++ unknown option $OPTARG \n";
	162	locat=parameter; exit;;
	163	esac
	164	done
	165
	166
	167
	168	# BATCH-MODE IST ZUR ZEIT NICHT FUNKTIONSFAEHIG
	169	if [[ $remote_mode = batch ]]
	170	then
	171	printf "\n +++ sorry, batch mode does not work! \n"
	172	locat=parameter; exit
	173	fi
	174
	175
	176
[82]	177	# PRUEFEN, OB KONFIGURATIONS-DATEI VORHANDEN
	178	if [[ ! -f $config_file ]]
	179	then
	180	printf "\n +++ configuration file: "
	181	printf "\n $config_file"
	182	printf "\n does not exist"
	183	locat=configuration; exit
	184	fi
	185
	186
	187
[1]	188	# LOKALEN RECHNER ERMITTELN
	189	local_host_real_name=$(hostname)
[69]	190	# local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
	191
[1]	192
[82]	193
	194	# HOST-IDENTIFIER (local_host) AUS KONFIGURATIONSDATEI BESTIMMEN
	195	line=""
[215]	196	grep "%host_identifier" $config_file > $tmp_mbuild
[82]	197	while read line
	198	do
[116]	199	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
[82]	200	then
	201	HOSTNAME=`echo $line \| cut -d" " -s -f2`
	202	host_identifier=`echo $line \| cut -d" " -s -f3`
[83]	203	if [[ $local_host_real_name = $HOSTNAME ]]
[82]	204	then
	205	local_host=$host_identifier
	206	break
	207	fi
	208	fi
[215]	209	done < $tmp_mbuild
[82]	210
	211	if [[ "$local_host" = "" ]]
	212	then
	213	printf "\n +++ no host identifier found in configuration file \"$config_file\""
	214	printf "\n for local host \"$local_host_real_name\"."
	215	printf "\n Please add line"
	216	printf "\n \"\%host_identifier $local_host_real_name <identifier>\""
	217	printf "\n to the configuration file."
	218	locat=local_host; exit
	219	fi
	220
	221
	222
[1]	223	[[ $local_host_real_name = scirocco ]] && scirocco=true
[67]	224	[[ $local_host_real_name = fimm.bccs.uib.no ]] && fimm=true
[1]	225
	226
	227
	228	if [[ $local_host != ibms ]]
	229	then
	230	config_file=$PWD/$config_file
	231	else
	232	config_file=`pwd`/$config_file
	233	fi
	234
	235
	236
	237	# BENUTZERNAMEN AUF LOKALEM RECHNER AUS KONFIGURATIONSDATEI ERMITTELN
	238	line=""
[215]	239	grep " $local_host" $config_file \| grep "%remote_username" > $tmp_mbuild
[69]	240	while read line
[1]	241	do
[116]	242	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
[1]	243	then
	244	local_username=`echo $line \| cut -d" " -s -f2`
	245	fi
[215]	246	done < $tmp_mbuild
[1]	247
[82]	248
[1]	249	if [[ "$local_username" = "" ]]
	250	then
	251	printf "\n +++ no user name found in configuration file"
	252	printf "\n for local host \"$local_host\" "
	253	locat=config_file; exit
	254	fi
	255
	256
[5]	257	# LOKALEN QUELLTEXTPFAD ERMITTELN.
	258	# ZUERST PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD FUER ALLE RECHNER
	259	# VEREINBART WURDE.
	260	# DAZU ZUNAECHST ALLE IN DER KONFIGURATIONSDATEI VEREINBARTEN GLOBALEN
	261	# VARIABLEN SETZEN, WEIL DIESE EVTL. IN PFADNAMEN VERWENDET WERDEN
	262	line=""
[215]	263	grep "%" $config_file > $tmp_mbuild
[69]	264	while read line
[5]	265	do
[116]	266	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" && $(echo $line \| cut -c1) != "#" ]]
[1]	267	then
[5]	268	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
	269	value=`echo $line \| cut -d" " -s -f2`
[8]	270	eval export $var=\$value
[9]	271	# eval echo \" $var=\$$var \" # AUSGABE ZU TESTZWECKEN
[1]	272	fi
[215]	273	done < $tmp_mbuild
[1]	274
[5]	275	# NUN PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD VEREINBART WURDE
[1]	276	line=""
[215]	277	grep "%source_path" $config_file > $tmp_mbuild
[69]	278	while read line
[1]	279	do
	280	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	281	then
	282	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
	283	then
	284	global_source_path=`echo $line \| cut -d" " -s -f2`
	285	fi
	286	fi
[215]	287	done < $tmp_mbuild
[1]	288
	289	line=""
[215]	290	grep " $local_host" $config_file \| grep "%source_path" > $tmp_mbuild
[69]	291	while read line
[1]	292	do
	293	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	294	then
	295	local_source_path=`echo $line \| cut -d" " -s -f2`
	296	fi
[215]	297	done < $tmp_mbuild
[1]	298
	299	if [[ "$local_source_path" = "" ]]
	300	then
	301	if [[ "$global_source_path" != "" ]]
	302	then
	303	local_source_path=$global_source_path
	304	else
	305	printf "\n +++ no source path found in configuration file"
	306	printf "\n for local host \"$local_host\" "
	307	printf "\n please set \"\%source_path\" in configuration file"
	308	locat=config_file; exit
	309	fi
	310	fi
	311	eval local_source_path=$local_source_path
[8]	312	eval local_source_path=$local_source_path
[1]	313
	314
[215]	315
	316	# GLOBALEN DEPOSITORY-PFAD ERMITTELN
[1]	317	line=""
[215]	318	grep "%depository_path" $config_file > $tmp_mbuild
[69]	319	while read line
[1]	320	do
	321	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	322	then
	323	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
	324	then
	325	global_depository_path=`echo $line \| cut -d" " -s -f2`
	326	fi
	327	fi
[215]	328	done < $tmp_mbuild
[1]	329
	330
	331
[5]	332	# PRUEFEN, OB IN KONFIGURATIONSDATEI EIN HAUPTPROGRAMM
	333	# VEREINBART WURDE
	334	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
	335	then
	336	printf "\n +++ no main program or more than one main program defined"
	337	printf "\n in configuration file"
	338	locat=configuration; exit
	339	else
	340	line=`grep "%mainprog" $config_file`
	341	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
	342	then
	343	printf "\n +++ no main program defined in configuration file"
	344	locat=configuration; exit
	345	fi
	346	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
	347	fi
	348
	349
	350
[1]	351	# MAKEFILE vorhanden
	352	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
	353	if [[ ! -f $makefile ]]
	354	then
	355	printf "\n +++ makefile: "
	356	printf "\n $makefile"
	357	printf "\n does not exist"
	358	locat=makefile; exit
	359	fi
	360
	361
	362	# HEADER-AUSGABE (TEIL1: MELDUNGEN UEBER LOKALEN RECHNER)
	363	calltime=$(date)
	364	printf "\n"
	365	printf "#------------------------------------------------------------------------# \n"
	366	printf "\| $version$calltime \| \n"
	367	printf "\| \| \n"
	368	column1="called on:"; column2=$local_host_real_name
	369	printf "\| $column1$column2 \| \n"
	370	column1="local username:"; column2=$local_username
	371	printf "\| $column1$column2 \| \n"
	372	column1="local IP-addres:"; column2=$local_addres
	373	printf "\| $column1$column2 \| \n"
	374	column1="config file:"; column2=$config_file
	375	printf "\| $column1$column2 \| \n"
	376	column1="makefile:"; column2=$makefile
	377	printf "\| $column1$column2 \| \n"
	378	column1="local source path:"; column2=$local_source_path
	379	printf "\| $column1$column2 \| \n"
	380	printf "#------------------------------------------------------------------------# \n"
	381
	382	# printf "\| \| \n"
	383
	384
[40]	385	if [[ $compile_utility_programs = false ]]
	386	then
[1]	387
[40]	388	# IN JEDEM FALL ALLEN DATEIEN WRITE-PERMIT GEBEN, DAMIT ES AUF
	389	# DEN REMOTE-RECHNERN NICHT EVTL. ZU PROBLEMEN BEIM UEBERSCHREIBEN KOMMT
[215]	390	cd $local_source_path
	391	printf "\n\n *** tar of makefile and source files in $local_source_path"
[40]	392	tar -cf ${mainprog}_sources.tar Makefile *.$suf
	393	printf "\n"
[1]	394
[40]	395	fi
[1]	396
	397
[40]	398
[1]	399	# BESTAETIGUNG ZUM WEITERMACHEN EINHOLEN
	400	if [[ $host = all ]]
	401	then
	402	printf "\n *** updates will be made for ALL hosts found in"
	403	printf "\n the configuration file"
	404	else
	405	printf "\n *** update will be made for host \"$host\" "
	406	fi
	407
	408	if [[ $silent = false ]]
	409	then
	410	answer=dummy
	411	printf "\n\n"
	412	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
	413	do
	414	printf " >>> continue (y/n) ? "
	415	read answer
	416	done
	417	if [[ $answer = n \|\| $answer = N ]]
	418	then
	419	locat=user_abort; exit
	420	fi
	421	fi
	422
	423
	424
	425
	426	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
	427	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
	428	printf "\n *** scanning configuration file for host(s) ..."
	429
[215]	430	grep %fopts $config_file > $tmp_mbuild
[69]	431	while read line
[1]	432	do
	433	# KOMMENTARZEILEN UEBERSPRINGEN
	434	[[ $(echo $line \| cut -c1) = "#" ]] && continue
	435	(( ihost = ihost + 1 ))
	436	hostline[$ihost]="$line"
[215]	437	done < $tmp_mbuild
[1]	438
	439
	440	while (( ih < ihost ))
	441	do
	442
	443	(( ih = ih + 1 ))
	444
	445	# REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
	446	# NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
	447	# SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
	448	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
	449	remote_host=`echo $remote_host_string \| cut -d" " -f1`
	450	if [[ $host != all ]]
	451	then
	452	[[ $remote_host != $host ]] && continue
	453	fi
	454	host_found=true
	455	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
	456	if [[ $condition1 = $remote_host ]]
	457	then
	458	condition1=""
	459	else
	460	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
	461	fi
	462
[82]	463	netcdf_inc=""
	464	netcdf_lib=""
[1]	465
	466	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
	467	case $remote_host in
[116]	468	(lcmuk) remote_addres=130.75.105.2;;
[181]	469	(lcsgib) remote_addres=130.73.232.102;;
[210]	470	(lcsgih) remote_addres=130.75.4.103;;
[83]	471	(lctit) remote_addres=172.17.75.161;;
[206]	472	(lcxt4) remote_addres=129.177.20.113;;
[83]	473	(decalpha) remote_addres=165.132.26.56;;
	474	(ibmb) remote_addres=130.73.230.10;;
	475	(ibmh) remote_addres=130.75.4.10;;
	476	(ibms) remote_addres=150.183.5.101;;
	477	(ibmy) remote_addres=165.132.26.58;;
	478	(nech) remote_addres=136.172.44.192;;
	479	(neck) remote_addres=133.5.178.11;;
	480	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
	481	(*) if [[ $local_host != $remote_host ]]
[1]	482	then
[83]	483	printf "\n +++ remote host \"$remote_host\" unknown";
	484	printf "\n please inform S. Raasch!"
[1]	485	fi;;
	486	esac
	487
	488
	489	# REMOTE-USERNAMEN ERMITTELN
	490	line=""
[116]	491	found=false
[215]	492	grep "$remote_host_string" $config_file \| grep "%remote_username" > $tmp_mbuild
[69]	493	while read line1
[1]	494	do
[116]	495
[1]	496	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	497	then
	498	line="$line1"
	499	fi
[116]	500
	501	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	502	then
	503	remote_username=`echo $line \| cut -d" " -s -f2`
	504	found=true
	505	fi
	506
[215]	507	done < $tmp_mbuild
[1]	508
[116]	509	if [[ $found = false ]]
[1]	510	then
	511	printf "\n +++ no remote username found in configuration file"
	512	printf "\n for \"$remote_host_string\" "
	513	locat=config_file; exit
	514	fi
	515
	516
	517	# REMOTE-QUELLTEXTPFAD ERMITTELN
	518	line=""
[54]	519	remote_source_path=""
[215]	520	grep "$remote_host_string" $config_file \| grep "%source_path" > $tmp_mbuild
[69]	521	while read line1
[1]	522	do
[116]	523
[1]	524	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	525	then
	526	line="$line1"
	527	fi
[116]	528
	529	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	530	then
	531	remote_source_path=`echo $line \| cut -d" " -s -f2`
	532	fi
	533
[215]	534	done < $tmp_mbuild
[1]	535
	536	if [[ "$remote_source_path" = "" ]]
	537	then
	538	if [[ "$global_source_path" != "" ]]
	539	then
	540	remote_source_path=$global_source_path
	541	else
	542	printf "\n +++ no source path found in configuration file"
	543	printf "\n for \"$remote_host_string\" "
	544	locat=config_file; exit
	545	fi
	546	fi
	547
[22]	548	remote_ud=${remote_source_path}/../UTIL
[24]	549	remote_ud=$(eval echo $remote_ud)
[1]	550
[54]	551
[1]	552	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
[54]	553	remote_md=""
[1]	554	line=""
[215]	555	grep "$remote_host_string" $config_file \| grep "%depository_path" > $tmp_mbuild
[69]	556	while read line1
[1]	557	do
[116]	558
[1]	559	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	560	then
	561	line="$line1"
	562	fi
[116]	563
	564	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	565	then
	566	remote_md=`echo $line \| cut -d" " -s -f2`
	567	fi
	568
[215]	569	done < $tmp_mbuild
[1]	570
	571	if [[ "$remote_md" = "" ]]
	572	then
	573	if [[ "$global_depository_path" != "" ]]
	574	then
	575	remote_md=$global_depository_path
	576	else
	577	printf "\n +++ no depository path found in configuration file"
	578	printf "\n for \"$remote_host_string\" "
	579	printf "\n please set \"\%depository_path\" in configuration file"
	580	locat=config_file; exit
	581	fi
	582	fi
	583
[8]	584	remote_md=$(eval echo $remote_md)
[215]	585	[[ "$condition1" != "" ]] && remote_md=${remote_md}_$condition1
	586	[[ "$condition2" != "" ]] && remote_md=${remote_md}_$condition2
[1]	587
[8]	588
[1]	589	# COMPILERNAMEN ERMITTELN
	590	line=""
[116]	591	found=false
[215]	592	grep "$remote_host_string" $config_file \| grep "%compiler_name " > $tmp_mbuild
[69]	593	while read line1
[1]	594	do
[116]	595
[1]	596	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	597	then
	598	line="$line1"
	599	fi
[116]	600
	601	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	602	then
	603	compiler_name=`echo $line \| cut -d" " -s -f2`
	604	found=true
	605	fi
	606
[215]	607	done < $tmp_mbuild
[1]	608
[116]	609	if [[ $found = false ]]
[1]	610	then
	611	printf "\n +++ no compiler name found in configuration file"
	612	printf "\n for \"$remote_host_string\" "
	613	locat=config_file; exit
	614	fi
	615
	616
[27]	617	# BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
	618	# SERIELLER COMPILERNAME ERMITTELT WERDEN
	619	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
	620	then
	621	line=""
[116]	622	found=false
[215]	623	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" > $tmp_mbuild
[69]	624	while read line1
[27]	625	do
[116]	626
[27]	627	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	628	then
	629	line="$line1"
	630	fi
[116]	631
	632	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	633	then
	634	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
	635	found=true
	636	fi
	637
[215]	638	done < $tmp_mbuild
[1]	639
[116]	640	if [[ $found = false ]]
[27]	641	then
[28]	642	printf "\n +++ no serial compiler name found in configuration file"
[27]	643	printf "\n for \"$remote_host_string\" "
	644	locat=config_file; exit
	645	fi
	646	else
	647	compiler_name_ser=$compiler_name
	648	fi
	649
	650
	651
[82]	652	# PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
	653	line=""
[116]	654	found=false
[215]	655	grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
[82]	656	while read line1
	657	do
[116]	658
[82]	659	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	660	then
	661	line="$line1"
	662	fi
[116]	663
	664	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	665	then
	666	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	667	cpp_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	668	found=true
	669	fi
	670
[215]	671	done < $tmp_mbuild
[116]	672
	673	if [[ $found = false ]]
[82]	674	then
	675	printf "\n +++ no preprocessor options found in configuration file"
	676	printf "\n for \"$remote_host_string\" "
	677	locat=config_file; exit
	678	fi
	679
[116]	680
[82]	681	# RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
	682	for string in $remote_host_string
	683	do
	684	if [[ $(echo $remote_host \| cut -c1-2) = lc && $(echo $string \| cut -c1-2) = lc ]]
	685	then
	686	cpp_options="$cpp_options -D__lc "
[83]	687	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $(echo $string \| cut -c1-3) = ibm ]]
	688	then
	689	cpp_options="${cpp_options},-D__ibm"
	690	elif [[ $(echo $remote_host \| cut -c1-3) = nec && $(echo $string \| cut -c1-3) = nec ]]
	691	then
	692	cpp_options="${cpp_options} -D__nec"
[82]	693	else
[83]	694	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
	695	then
	696	cpp_options="${cpp_options},-D__$string"
	697	else
	698	cpp_options="$cpp_options -D__$string "
	699	fi
[82]	700	fi
	701	done
	702
	703
	704
	705	# NETCDF-OPTIONEN ERMITTELN
	706	line=""
[215]	707	grep "$remote_host_string" $config_file \| grep "%netcdf_inc" > $tmp_mbuild
[82]	708	while read line1
	709	do
[116]	710
[82]	711	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	712	then
	713	line="$line1"
	714	fi
[116]	715
	716	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	717	then
	718	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	719	netcdf_inc=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	720	fi
	721
[215]	722	done < $tmp_mbuild
[82]	723
	724	line=""
[215]	725	grep "$remote_host_string" $config_file \| grep "%netcdf_lib" > $tmp_mbuild
[82]	726	while read line1
	727	do
[116]	728
[82]	729	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	730	then
	731	line="$line1"
	732	fi
[116]	733
	734	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	735	then
	736	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	737	netcdf_lib=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	738	fi
	739
[215]	740	done < $tmp_mbuild
[82]	741
	742
	743
[1]	744	# COMPILEROPTIONEN ERMITTELN
	745	line=""
[116]	746	found=false
[215]	747	grep "$remote_host_string" $config_file \| grep "%fopts" > $tmp_mbuild
[69]	748	while read line1
[1]	749	do
[116]	750
[1]	751	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	752	then
	753	line="$line1"
	754	fi
[116]	755
	756	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	757	then
	758	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	759	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	760	found=true
	761
	762	# NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
	763	compiler_options="$compiler_options $netcdf_inc"
	764	fi
	765
[215]	766	done < $tmp_mbuild
[116]	767
	768	if [[ $found = false ]]
[1]	769	then
	770	printf "\n +++ no compiler options found in configuration file"
	771	printf "\n for \"$remote_host_string\" "
	772	locat=config_file; exit
	773	fi
[82]	774
[1]	775
	776
[221]	777	# MPI LIBRARY ERMITTELN
	778	line=""
	779	found=false
	780	grep "$remote_host_string" $config_file \| grep "%mpilib" > $tmp_mbuild
	781	while read line1
	782	do
	783
	784	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	785	then
	786	line="$line1"
	787	fi
	788
	789	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	790	then
	791	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	792	mpilib=`echo $line \| cut -d" " -s -f2`
	793	found=true
	794	fi
	795
	796	done < $tmp_mbuild
	797
	798	[[ $found = false ]] && mpilib=mpt
	799
	800
	801
	802
[1]	803	# LADER-OPTIONEN ERMITTELN
	804	line=""
[116]	805	found=false
[215]	806	grep "$remote_host_string" $config_file \| grep "%lopts" > $tmp_mbuild
[69]	807	while read line1
[1]	808	do
[116]	809
[1]	810	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	811	then
	812	line="$line1"
	813	fi
[116]	814
	815	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	816	then
	817	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	818	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	819	found=true
	820
	821	# NETCDF-LIBRARY HINZUFUEGEN
	822	loader_options="$loader_options $netcdf_lib"
	823	fi
	824
[215]	825	done < $tmp_mbuild
[1]	826
[116]	827	if [[ $found = false ]]
[1]	828	then
	829	printf "\n +++ no loader options found in configuration file"
	830	printf "\n for \"$remote_host_string\" "
	831	locat=config_file; exit
	832	fi
[82]	833
[1]	834
	835	printf "\n\n#------------------------------------------------------------------------# \n"
	836	if [[ $remote_host = $local_host ]]
	837	then
	838	column1="remote_host:"; column2="$remote_host (= local host!)"
	839	else
	840	column1="remote_host:"; column2=$remote_host
	841	fi
	842	printf "\| $column1$column2 \| \n"
	843	printf "\| \| \n"
	844	column1="conditions:"; column2="$condition1 $condition2"
	845	printf "\| $column1$column2 \| \n"
	846	column1="make depository:"; column2=$remote_md
	847	printf "\| $column1$column2 \| \n"
[215]	848	line=$(echo "$remote_md" \| cut -c51-)
	849	while [[ "$line" != "" ]]
	850	do
	851	column1=""
	852	column2=$line
	853	printf "\| $column1$column2 \| \n"
	854	line=$(echo "$line" \| cut -c51-)
	855	done
[25]	856	if [[ $compile_utility_programs = true ]]
	857	then
	858	column1="utility directory:"; column2=$remote_ud
	859	printf "\| $column1$column2 \| \n"
	860	fi
[1]	861	column1="username:"; column2=$remote_username
	862	printf "\| $column1$column2 \| \n"
	863	column1="addres:"; column2=$remote_addres
	864	printf "\| $column1$column2 \| \n"
	865	column1="compiler:"; column2=$compiler_name
	866	printf "\| $column1$column2 \| \n"
[28]	867	if [[ $compile_utility_programs = true ]]
	868	then
	869	column1="serial compiler:"; column2=$compiler_name_ser
	870	printf "\| $column1$column2 \| \n"
	871	fi
[1]	872	column1="cpp options:"; column2=$cpp_options
	873	printf "\| $column1$column2 \| \n"
	874	line=$(echo "$cpp_options" \| cut -c51-)
	875	while [[ "$line" != "" ]]
	876	do
	877	column1=""
	878	column2=$line
	879	printf "\| $column1$column2 \| \n"
	880	line=$(echo "$line" \| cut -c51-)
	881	done
	882	column1="compiler options:"; column2=$compiler_options
	883	printf "\| $column1$column2 \| \n"
	884	line=$(echo "$compiler_options" \| cut -c51-)
	885	while [[ "$line" != "" ]]
	886	do
	887	column1=""
	888	column2=$line
	889	printf "\| $column1$column2 \| \n"
	890	line=$(echo "$line" \| cut -c51-)
	891	done
[221]	892	if [[ $( echo $remote_host \| cut -c1-5 ) = lcsgi ]]
	893	then
	894	column1="mpi library:"; column2=$mpilib
	895	printf "\| $column1$column2 \| \n"
	896	fi
[1]	897	column1="loader options:"; column2=$loader_options
	898	printf "\| $column1$column2 \| \n"
	899	line=$(echo "$loader_options" \| cut -c51-)
	900	while [[ "$line" != "" ]]
	901	do
	902	column1=""
	903	column2=$line
	904	printf "\| $column1$column2 \| \n"
	905	line=$(echo "$line" \| cut -c51-)
	906	done
	907	printf "#------------------------------------------------------------------------# \n"
	908
	909	if [[ $silent = false ]]
	910	then
	911	answer=dummy
	912	printf "\n\n"
	913	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
	914	do
	915	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
	916	read answer
	917	done
	918	if [[ $answer = a \|\| $answer = A ]]
	919	then
	920	locat=user_abort; exit
	921	fi
	922	if [[ $answer = c \|\| $answer = C ]]
	923	then
	924	silent=false
	925	fi
	926	if [[ $answer = s \|\| $answer = S ]]
	927	then
	928	continue
	929	fi
	930	fi
	931
	932
	933	if [[ $remote_mode = batch ]]
	934	then
	935
	936	# BATCH-JOB PARAMETER SETZEN
	937	case $remote_host in
	938	(t3eb) queue=berte; memory=60; cputime=1000; xoption="-X 0";;
	939	(t3eh) queue=comp_t3e; memory=60; cputime=360;;
	940	(t3ej2) queue=normal; memory=60; cputime=1000; xoption="-X 0";;
[5]	941	(t3ej5\|ground.yonsei.ac.kr) printf "\n --- remote host \"$remote_host\" does not allow batch jobs"; continue;;
[1]	942	esac
	943
	944
	945	# BATCH-JOB ZUSAMMENSTELLEN
	946	printf "\n *** creating batch-job for remote host"
	947	echo " " > mbuild_job
	948
	949	# AUF CRAY-RECHNERN IN JUELICH WIRD KEIN BENUTZER-PROFILE AUSGEFUEHRT
	950	# DIES WIRD HIER GETAN, UM PFADE USW. ZU SETZEN
	951	if [[ $remote_host = t3ej2 ]]
	952	then
	953	echo "set +vx" >> mbuild_job
	954	echo ". .profile" >> mbuild_job
	955	echo "set -x" >> mbuild_job
	956	fi
	957
	958	# AUF CRAY-RECHNERN GELADENE MODULE AUFLISTEN
	959	if [[ $host = t3eb \|\| $host = t3eh \|\| $host = t3ej2 ]]
	960	then
	961	echo "module list" >> mbuild_job
	962	fi
	963
	964
	965	# WECHSEL IN TEMPORAERES VERZEICHNIS
	966	echo "cd ${remote_md}" >> mbuild_job
	967
	968
	969	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	970	echo "scp ${local_username}@${local_addres}:~/modell/code_3dp/palm_current_version/${mainprog}_sources.tar ${mainprog}_sources.tar" >> mbuild_job
	971	# echo "[[ \$? != 0 ]] && (echo "+++ scp failed"; exit)" >> mbuild_job
	972
	973
	974	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
	975	echo "[[ -f ${mainprog}_current_version.tar ]] && tar -xvf ${mainprog}_current_version.tar" >> mbuild_job
	976
	977
	978	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
	979	echo "tar -xvf ${mainprog}_sources.tar" >> mbuild_job
	980
	981
	982	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	983	echo "make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " >> mbuild_job
	984	echo "chmod u+w *" >> mbuild_job
	985
	986	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
	987	echo "tar -cvf ${mainprog}_current_version.tar .f90 .o" >> mbuild_job
	988
	989
	990	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
	991	echo "make clean" >> mbuild_job
	992	echo "rm ${mainprog}_sources.tar" >> mbuild_job
	993	echo "rm *.f90 Makefile" >> mbuild_job
	994
	995
	996
	997	# JOB MITTELS SUBJOB STARTEN
	998	printf "\n *** sending batch job to remote host"
	999	# subjob $xoption -h $remote_host -q $queue -m $memory -t $cputime -v mbuild_job
	1000
	1001
	1002	# JOBFILE LOESCHEN
	1003	# rm aljob
	1004
	1005	else
	1006
	1007	if [[ $remote_host != $local_host ]]
	1008	then
	1009
[40]	1010	if [[ $compile_utility_programs = false ]]
[1]	1011	then
	1012
[40]	1013	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	1014	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
	1015	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
	1016	if [[ $remote_host != lctit ]]
	1017	then
	1018	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
	1019	else
[206]	1020	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
[40]	1021	# MIT SSH, DESHALB AUFRUF PER PIPE
	1022	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
	1023	fi
	1024	if [[ $local_host = decalpha ]]
	1025	then
[206]	1026	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
[40]	1027	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1028	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1029	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
[215]	1030	/bin/scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
[40]	1031	else
[215]	1032	scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
[40]	1033	fi
[1]	1034
	1035
	1036
[40]	1037	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
	1038	echo " *** untar previous update on remote host, if existing"
	1039	if [[ $remote_host != lctit ]]
	1040	then
	1041	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
	1042	else
[206]	1043	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
[40]	1044	# MIT SSH, DESHALB AUFRUF PER PIPE
	1045	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
	1046	fi
[1]	1047
	1048
[40]	1049	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
	1050	echo " *** untar actual sources on remote host"
	1051	if [[ $remote_host != lctit ]]
	1052	then
	1053	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
	1054	else
[206]	1055	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
[40]	1056	# MIT SSH, DESHALB AUFRUF PER PIPE
	1057	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
	1058	fi
[1]	1059
	1060
[40]	1061	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1062	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
	1063	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
	1064	# Z.B. DIE PFADE ZUM COMPILER)
	1065	echo " *** execute \"make\" on remote host"
[1]	1066
[40]	1067	if [[ $remote_host = nech ]]
	1068	then
	1069	make_call_string="sxmake PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1070	else
	1071	make_call_string="make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1072	fi
	1073
	1074	if [[ $remote_host = t3eh ]]
	1075	then
[1]	1076
[40]	1077	print "xterm\nexit\n cd ${remote_md}; make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1078
[40]	1079	elif [[ $remote_host = t3ej2 \|\| $remote_host = ibms \|\| $remote_host = ibmy ]]
	1080	then
[1]	1081
[40]	1082	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1083
[40]	1084	elif [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
	1085	then
[1]	1086
[40]	1087	print "export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1088
[181]	1089	elif [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
	1090	then
	1091
[221]	1092	print ". /usr/share/modules/init/bash; module load $mpilib; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[196]	1093	# print ". /usr/share/modules/init/bash; module load mvapich2/1.2rc1-intel; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1094	# print ". /usr/share/modules/init/bash; module load mvapich2; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[181]	1095
[40]	1096	elif [[ $remote_host = lctit ]]
	1097	then
[1]	1098
[40]	1099	echo " " > ${remote_host}_last_make_protokoll
	1100	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
	1101	do
	1102	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1103	done
[1]	1104
[206]	1105	elif [[ $remote_host = lcxt4 ]]
	1106	then
	1107
	1108	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1109
[40]	1110	else
[1]	1111
[40]	1112	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1113
[40]	1114	fi
[1]	1115
[40]	1116	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
[1]	1117	then
[40]	1118	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
	1119	if [[ $silent = false ]]
	1120	then
	1121	answer=dummy
	1122	printf "\n"
	1123	while [[ "$answer" != c && "$answer" != k ]]
	1124	do
	1125	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
	1126	read answer
	1127	if [[ "$answer" = l ]]
	1128	then
	1129	more ${remote_host}_last_make_protokoll
	1130	fi
	1131	done
	1132	if [[ $answer = k ]]
[1]	1133	then
[40]	1134	locat=user_abort; exit
[1]	1135	fi
	1136	fi
	1137	fi
	1138
	1139
	1140
[40]	1141	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
	1142	printf "\n *** tar update on remote host ..."
	1143	if [[ $remote_host != lctit ]]
	1144	then
[181]	1145	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod"
[40]	1146	else
[206]	1147	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
[40]	1148	# MIT SSH, DESHALB AUFRUF PER PIPE
[181]	1149	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
[40]	1150	fi
[1]	1151
	1152
[40]	1153	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
	1154	# printf "\n *** \"make clean\" on remote host ..."
	1155	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
	1156	# printf "\n"
[1]	1157
	1158
[25]	1159
	1160
[22]	1161	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
	1162	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	1163	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
[40]	1164	elif [[ $compile_utility_programs = true ]]
[22]	1165	then
	1166
[24]	1167	printf "\n\n"
[27]	1168	echo " *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
	1169	cd ${local_source_path}/../SCRIPTS
[22]	1170
	1171	if [[ $remote_host != lctit ]]
	1172	then
[24]	1173	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
[22]	1174	else
[206]	1175	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
[22]	1176	# MIT SSH, DESHALB AUFRUF PER PIPE
[24]	1177	print "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_addres} 2>&1
[22]	1178	fi
	1179
[27]	1180	# KOPIEREN DER SCRIPTE
[22]	1181	if [[ $local_host = decalpha ]]
	1182	then
[206]	1183	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
[22]	1184	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1185	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1186	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
[27]	1187	/bin/scp batch_scp mbuild mrun subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
	1188	else
[28]	1189	scp batch_scp mbuild mrun subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
[27]	1190	fi
	1191
	1192	cd - > /dev/null
	1193	cd ${local_source_path}/../UTIL
	1194
	1195
	1196	# KOPIEREN DER UTILITY-PROGRAMME
	1197	if [[ $local_host = decalpha ]]
	1198	then
[206]	1199	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
[27]	1200	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1201	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1202	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
[24]	1203	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
[22]	1204	else
[24]	1205	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
[22]	1206	fi
	1207
	1208
	1209
	1210	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1211	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
	1212	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
	1213	# Z.B. DIE PFADE ZUM COMPILER)
	1214	echo " *** execute \"make\" on remote host"
	1215
	1216	if [[ $remote_host = nech ]]
	1217	then
[27]	1218	make_call_string="sxmake F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
[22]	1219	else
[27]	1220	make_call_string="make F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
[22]	1221	fi
	1222
	1223	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
	1224	then
	1225
[25]	1226	ssh ${remote_username}@${remote_addres} "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
[22]	1227
	1228	elif [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
	1229	then
	1230
[25]	1231	print "export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres}
[22]	1232
	1233	elif [[ $remote_host = lctit ]]
	1234	then
	1235
	1236	echo " " > ${remote_host}_last_make_protokoll
	1237	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
	1238	do
	1239	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1240	done
	1241
	1242	else
	1243
	1244	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1245
	1246	fi
	1247
	1248	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
	1249
[75]	1250	rm -rf ${remote_host}_last_make_protokoll
[22]	1251
[1]	1252	else
	1253
[40]	1254	if [[ $compile_utility_programs = false ]]
	1255	then
[1]	1256
[215]	1257	# DEPOSITORY VERZEICHNIS ERZEUGEN, FALLS NOCH NICHT VORHANDEN
	1258	eval remote_md=$remote_md
	1259	if [[ ! -d $remote_md ]]
	1260	then
	1261	if mkdir $remote_md
	1262	then
	1263	printf "\n\n *** directory for make depository:"
	1264	printf "\n $remote_md"
	1265	printf "\n was created\n"
	1266	else
	1267	printf "\n +++ directory for make depository:"
	1268	printf "\n $remote_md"
	1269	printf "\n cannot be created"
	1270	locat=local_depository_path; exit
	1271	fi
	1272	fi
	1273
	1274	# QUELLTEXT-DATEIEN AUS REPOSITORY INS DEPOSITORY KOPIEREN
	1275	echo " "
	1276	echo " *** updating sources in $remote_md"
	1277	cd $remote_md
	1278	cp $local_source_path/${mainprog}_sources.tar .
	1279	tar xf ${mainprog}_sources.tar
	1280
[40]	1281	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
	1282	echo " "
	1283	echo " *** execute \"make\" on local host"
[1]	1284
[40]	1285	make PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
	1286
	1287	if [[ $? != 0 ]]
[1]	1288	then
[40]	1289	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
	1290	if [[ $silent = false ]]
	1291	then
	1292	answer=dummy
	1293	printf "\n"
	1294	while [[ "$answer" != c && "$answer" != k ]]
	1295	do
	1296	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
	1297	read answer
	1298	if [[ "$answer" = l ]]
	1299	then
	1300	more ${remote_host}_last_make_protokoll
	1301	fi
	1302	done
	1303	if [[ $answer = k ]]
[1]	1304	then
[40]	1305	locat=user_abort; exit
[1]	1306	fi
	1307	fi
	1308	fi
	1309
	1310
[40]	1311	# NEUE VERSION AUF LOKALEM RECHNER ZUSAMMENPACKEN
	1312	printf "\n *** tar update on local host ..."
	1313	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
[1]	1314
[22]	1315
	1316	# COMPILE THE UTILITY PROGRAMS
[40]	1317	elif [[ $compile_utility_programs = true ]]
[22]	1318	then
	1319	printf "\n\n"
	1320	echo " *** compiling the utility programs ..."
	1321	cd ${local_source_path}/../UTIL
[35]	1322	make F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
[22]	1323	cd - > /dev/null
	1324	fi
	1325
[1]	1326	fi
	1327
	1328	fi
	1329	done
	1330
	1331
	1332	if [[ $host_found = false ]]
	1333	then
	1334	if [[ $host = all ]]
	1335	then
	1336	printf "\n +++ no hosts found in configuration file"
	1337	else
	1338	printf "\n +++ host \"$host\" not found in configuration file"
	1339	fi
	1340	locat=config_file; exit
	1341	fi
	1342
	1343
	1344
	1345	# ABSCHLIESSENDE ARBEITEN
	1346	rm -f hosts_found_in_config_file
	1347

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |