Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 217

Last change on this file since 217 was 215, checked in by raasch, 16 years ago
precompilation mechanism completely revised: now one depository per configuration block, further change of output messages
Property svn:keywords set to `Id Rev`
File size: 48.2 KB

Rev	Line
[1]	1	#!/bin/ksh
[66]	2	# mbuild - Programmuebersetzungsscript
[169]	3	# $Id: mbuild 215 2008-11-18 09:54:31Z letzel $
[1]	4
	5	# Prozedur zur Uebersetzung von Programmteilen mittels make-Mechanismus
	6	# auf einem Remote-Rechner, ausgehend von Quellcode auf einem lokalen
	7	# Rechner
	8
	9	# Folgende Probleme existieren unter Linux, wenn keine AT&T-Korn-Shell
	10	# verwendet wird:
	11	# Wertzuweisungen an Variablen innerhalb von DO-Schleifen werden nicht
	12	# nach aussen weitergegeben. "while read line" funktioniert nicht
	13	# innerhalb einer Pipe.
	14
	15	# letzte Aenderung:
	16	# 06/05/02 - Siggi - Beginn der Entwicklung
	17	# 12/06/02 - Siggi - Abschluss der Entwicklungsarbeiten
	18	# 23/06/02 - Siggi - voerst kein make-clean, Abbruch bei batch-mode
	19	# 24/07/02 - Siggi - Keine Verwendung der temporaeren Datei tmp_mbuild
	20	# unter linux mehr noetig, da nun AT&T-Korn-Shell
	21	# benutzt wird
	22	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) validiert
	23	# 19/12/02 - Siggi - ibmb validiert
	24	# 05/02/03 - Siggi - hostname nobela included
	25	# 04/03/03 - Siggi - host nech included
	26	# 06/03/03 - Siggi - make_call_string is echoed without '' to
	27	# file LAST_MAKE_CALL (otherwise error on NEC, because
	28	# '' are part of compiler options
	29	# 16/03/03 - Siggi - Two underscores are placed in front of every define
	30	# string, in case that palm.f90 version contains
	31	# such strings
	32	# 16/04/03 - Siggi - First extensions for linux machines
	33	# 24/06/03 - Siggi - host orkan included
	34	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
	35	# 24/07/03 - Siggi - host maestro admitted
	36	# 06/08/03 - Siggi - host gregale admitted
	37	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
	38	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
	39	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
	40	# (-D$OMP=OMP) in order to avoid problems with
	41	# OMP_NUM_THREADS
	42	# 09/01/04 - Siggi - action above cancelled
	43	# 28/01/04 - Siggi - action above re-cancelled
	44	# 08/03/04 - Siggi - host scirocco admitted
	45	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
	46	# the respective .f90 file is not listed in the makefile
	47	# and deletion is demanded by the user
	48	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
	49	# due to error in ssh installation (otherwise a prompt
	50	# for the password appears)
	51	# 23/07/04 - Siggi - changes due to the new berni configuration
	52	# (federation switch)
	53	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
	54	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
	55	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
	56	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
	57	# 24/04/05 - Siggi - netcdf support on lcmuk
	58	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
	59	# 12/05/05 - Siggi - netcdf support on ibm
	60	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
	61	# 18/05/05 - Siggi - netcdf support on nec
	62	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
	63	# 23/05/05 - Siggi - netcdf support on ibms
	64	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
	65	# 30/06/05 - Siggi - netcdf support on bora
	66	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
	67	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
	68	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
	69	# host gfdl5 (ibmy) admitted
	70	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
	71	# 20/01/06 - Siggi - cpp directive for ibmy
	72	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
	73	# 10/02/06 - Siggi - modifications for scp on decalpha
	74	# 13/04/06 - Siggi - ostria admitted
	75	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
	76	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
	77	# 29/05/05 - Siggi - atmos (lcide) admitted
	78	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
	79	# 24/11/06 - Siggi - breva and levanto admitted
	80	# 07/02/07 - Siggi - adapted for RIAM (neck)
[5]	81	# 10/02/07 - Siggi - all hpmuk-related code removed
[40]	82	# 02/03/07 - Siggi - compilation of utility programs and transfer of
[27]	83	# scripts to remote hosts added (option -u)
[66]	84	# 14/03/07 - Siggi - fimm admitted, revision number added to terminal
	85	# output
[69]	86	# 16/03/07 - Siggi - adjustments (netcdf) for lctit
	87	# adjustments for running under pdksh, local ip-addres
	88	# is not determined any more
[82]	89	# 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
	90	# from configuration file
	91	# host identifier (local_host) is read from config file
[116]	92	# 10/10/07 - Siggi - bugfix: handling of comment lines
[181]	93	# 18/07/08 - Siggi - adapted for lcsgih
	94	# 21/07/08 - Siggi - mainprog (executable) is added to the tar-file
	95	# ({mainprog}_current_version)
[206]	96	# 02/10/08 - Siggi - adapted for lcxt4
[215]	97	# 14/11/08 - Siggi - update mechanism completely revised: source tarfile
	98	# remains in source directory, one depository per block
	99	# (given in the config-file) is created, always all files
	100	# from the source directory are copied to the respective
	101	# depository, no additional file checks are done any more
	102	# (version 2.1)
[1]	103
	104
	105
	106	# VARIABLENVEREINBARUNGEN + DEFAULTWERTE
[22]	107	compile_utility_programs=false
[1]	108	config_file=.mrun.config
[67]	109	fimm=false
[1]	110	host=all
	111	host_found=false
	112	ibm_hb_done=false
	113	lcmuk_done=false
	114	locat=normal
	115	makefile=""
	116	remote_mode=interactive
	117	scirocco=false
	118	silent=false
	119	suf=f90
	120	update=false
[83]	121	working_directory=`pwd`
[1]	122
	123	typeset -i ih ihost=0
	124
[66]	125	typeset -R30 calltime
[1]	126	typeset -L20 column1
	127	typeset -L50 column2
	128	typeset -L70 column3
[215]	129	typeset -L40 version="MBUILD 2.1 Rev$Rev: 215 $"
[1]	130
	131	# FEHLERBEHANDLUNG
	132	# BEI EXIT:
[83]	133	trap 'rm -rf $working_directory/tmp_mbuild
[69]	134	if [[ $locat != normal ]]
[1]	135	then
	136	printf "\n\n +++ mbuild killed \n\n"
	137	else
	138	printf "\n\n *** mbuild finished \n\n"
	139	fi' exit
	140
	141
	142	# BEI TERMINAL-BREAK:
[83]	143	trap 'rm -rf $working_directory/tmp_mbuild
[69]	144	printf "\n\n +++ mbuild killed by \"^C\" \n\n"
[1]	145	exit
	146	' 2
	147
	148
[215]	149	tmp_mbuild=${working_directory}/tmp_mbuild
[1]	150
	151	# SHELLSCRIPT-OPTIONEN EINLESEN
[22]	152	while getopts :c:h:m:rs:u option
[1]	153	do
	154	case $option in
	155	(c) config_file=$OPTARG;;
	156	(h) host=$OPTARG;;
	157	(m) makefile=$OPTARG;;
	158	(r) remote_mode=batch;;
	159	(s) suf=$OPTARG;;
[22]	160	(u) compile_utility_programs=true;;
[1]	161	(\?) printf "\n +++ unknown option $OPTARG \n";
	162	locat=parameter; exit;;
	163	esac
	164	done
	165
	166
	167
	168	# BATCH-MODE IST ZUR ZEIT NICHT FUNKTIONSFAEHIG
	169	if [[ $remote_mode = batch ]]
	170	then
	171	printf "\n +++ sorry, batch mode does not work! \n"
	172	locat=parameter; exit
	173	fi
	174
	175
	176
[82]	177	# PRUEFEN, OB KONFIGURATIONS-DATEI VORHANDEN
	178	if [[ ! -f $config_file ]]
	179	then
	180	printf "\n +++ configuration file: "
	181	printf "\n $config_file"
	182	printf "\n does not exist"
	183	locat=configuration; exit
	184	fi
	185
	186
	187
[1]	188	# LOKALEN RECHNER ERMITTELN
	189	local_host_real_name=$(hostname)
[69]	190	# local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
	191
[1]	192
[82]	193
	194	# HOST-IDENTIFIER (local_host) AUS KONFIGURATIONSDATEI BESTIMMEN
	195	line=""
[215]	196	grep "%host_identifier" $config_file > $tmp_mbuild
[82]	197	while read line
	198	do
[116]	199	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
[82]	200	then
	201	HOSTNAME=`echo $line \| cut -d" " -s -f2`
	202	host_identifier=`echo $line \| cut -d" " -s -f3`
[83]	203	if [[ $local_host_real_name = $HOSTNAME ]]
[82]	204	then
	205	local_host=$host_identifier
	206	break
	207	fi
	208	fi
[215]	209	done < $tmp_mbuild
[82]	210
	211	if [[ "$local_host" = "" ]]
	212	then
	213	printf "\n +++ no host identifier found in configuration file \"$config_file\""
	214	printf "\n for local host \"$local_host_real_name\"."
	215	printf "\n Please add line"
	216	printf "\n \"\%host_identifier $local_host_real_name <identifier>\""
	217	printf "\n to the configuration file."
	218	locat=local_host; exit
	219	fi
	220
	221
	222
[1]	223	[[ $local_host_real_name = scirocco ]] && scirocco=true
[67]	224	[[ $local_host_real_name = fimm.bccs.uib.no ]] && fimm=true
[1]	225
	226
	227
	228	if [[ $local_host != ibms ]]
	229	then
	230	config_file=$PWD/$config_file
	231	else
	232	config_file=`pwd`/$config_file
	233	fi
	234
	235
	236
	237	# BENUTZERNAMEN AUF LOKALEM RECHNER AUS KONFIGURATIONSDATEI ERMITTELN
	238	line=""
[215]	239	grep " $local_host" $config_file \| grep "%remote_username" > $tmp_mbuild
[69]	240	while read line
[1]	241	do
[116]	242	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
[1]	243	then
	244	local_username=`echo $line \| cut -d" " -s -f2`
	245	fi
[215]	246	done < $tmp_mbuild
[1]	247
[82]	248
[1]	249	if [[ "$local_username" = "" ]]
	250	then
	251	printf "\n +++ no user name found in configuration file"
	252	printf "\n for local host \"$local_host\" "
	253	locat=config_file; exit
	254	fi
	255
	256
[5]	257	# LOKALEN QUELLTEXTPFAD ERMITTELN.
	258	# ZUERST PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD FUER ALLE RECHNER
	259	# VEREINBART WURDE.
	260	# DAZU ZUNAECHST ALLE IN DER KONFIGURATIONSDATEI VEREINBARTEN GLOBALEN
	261	# VARIABLEN SETZEN, WEIL DIESE EVTL. IN PFADNAMEN VERWENDET WERDEN
	262	line=""
[215]	263	grep "%" $config_file > $tmp_mbuild
[69]	264	while read line
[5]	265	do
[116]	266	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" && $(echo $line \| cut -c1) != "#" ]]
[1]	267	then
[5]	268	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
	269	value=`echo $line \| cut -d" " -s -f2`
[8]	270	eval export $var=\$value
[9]	271	# eval echo \" $var=\$$var \" # AUSGABE ZU TESTZWECKEN
[1]	272	fi
[215]	273	done < $tmp_mbuild
[1]	274
[5]	275	# NUN PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD VEREINBART WURDE
[1]	276	line=""
[215]	277	grep "%source_path" $config_file > $tmp_mbuild
[69]	278	while read line
[1]	279	do
	280	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	281	then
	282	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
	283	then
	284	global_source_path=`echo $line \| cut -d" " -s -f2`
	285	fi
	286	fi
[215]	287	done < $tmp_mbuild
[1]	288
	289	line=""
[215]	290	grep " $local_host" $config_file \| grep "%source_path" > $tmp_mbuild
[69]	291	while read line
[1]	292	do
	293	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	294	then
	295	local_source_path=`echo $line \| cut -d" " -s -f2`
	296	fi
[215]	297	done < $tmp_mbuild
[1]	298
	299	if [[ "$local_source_path" = "" ]]
	300	then
	301	if [[ "$global_source_path" != "" ]]
	302	then
	303	local_source_path=$global_source_path
	304	else
	305	printf "\n +++ no source path found in configuration file"
	306	printf "\n for local host \"$local_host\" "
	307	printf "\n please set \"\%source_path\" in configuration file"
	308	locat=config_file; exit
	309	fi
	310	fi
	311	eval local_source_path=$local_source_path
[8]	312	eval local_source_path=$local_source_path
[1]	313
	314
[215]	315
	316	# GLOBALEN DEPOSITORY-PFAD ERMITTELN
[1]	317	line=""
[215]	318	grep "%depository_path" $config_file > $tmp_mbuild
[69]	319	while read line
[1]	320	do
	321	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	322	then
	323	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
	324	then
	325	global_depository_path=`echo $line \| cut -d" " -s -f2`
	326	fi
	327	fi
[215]	328	done < $tmp_mbuild
[1]	329
	330
	331
[5]	332	# PRUEFEN, OB IN KONFIGURATIONSDATEI EIN HAUPTPROGRAMM
	333	# VEREINBART WURDE
	334	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
	335	then
	336	printf "\n +++ no main program or more than one main program defined"
	337	printf "\n in configuration file"
	338	locat=configuration; exit
	339	else
	340	line=`grep "%mainprog" $config_file`
	341	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
	342	then
	343	printf "\n +++ no main program defined in configuration file"
	344	locat=configuration; exit
	345	fi
	346	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
	347	fi
	348
	349
	350
[1]	351	# MAKEFILE vorhanden
	352	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
	353	if [[ ! -f $makefile ]]
	354	then
	355	printf "\n +++ makefile: "
	356	printf "\n $makefile"
	357	printf "\n does not exist"
	358	locat=makefile; exit
	359	fi
	360
	361
	362	# HEADER-AUSGABE (TEIL1: MELDUNGEN UEBER LOKALEN RECHNER)
	363	calltime=$(date)
	364	printf "\n"
	365	printf "#------------------------------------------------------------------------# \n"
	366	printf "\| $version$calltime \| \n"
	367	printf "\| \| \n"
	368	column1="called on:"; column2=$local_host_real_name
	369	printf "\| $column1$column2 \| \n"
	370	column1="local username:"; column2=$local_username
	371	printf "\| $column1$column2 \| \n"
	372	column1="local IP-addres:"; column2=$local_addres
	373	printf "\| $column1$column2 \| \n"
	374	column1="config file:"; column2=$config_file
	375	printf "\| $column1$column2 \| \n"
	376	column1="makefile:"; column2=$makefile
	377	printf "\| $column1$column2 \| \n"
	378	column1="local source path:"; column2=$local_source_path
	379	printf "\| $column1$column2 \| \n"
	380	printf "#------------------------------------------------------------------------# \n"
	381
	382	# printf "\| \| \n"
	383
	384
[40]	385	if [[ $compile_utility_programs = false ]]
	386	then
[1]	387
[40]	388	# IN JEDEM FALL ALLEN DATEIEN WRITE-PERMIT GEBEN, DAMIT ES AUF
	389	# DEN REMOTE-RECHNERN NICHT EVTL. ZU PROBLEMEN BEIM UEBERSCHREIBEN KOMMT
[215]	390	cd $local_source_path
	391	printf "\n\n *** tar of makefile and source files in $local_source_path"
[40]	392	tar -cf ${mainprog}_sources.tar Makefile *.$suf
	393	printf "\n"
[1]	394
[40]	395	fi
[1]	396
	397
[40]	398
[1]	399	# BESTAETIGUNG ZUM WEITERMACHEN EINHOLEN
	400	if [[ $host = all ]]
	401	then
	402	printf "\n *** updates will be made for ALL hosts found in"
	403	printf "\n the configuration file"
	404	else
	405	printf "\n *** update will be made for host \"$host\" "
	406	fi
	407
	408	if [[ $silent = false ]]
	409	then
	410	answer=dummy
	411	printf "\n\n"
	412	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
	413	do
	414	printf " >>> continue (y/n) ? "
	415	read answer
	416	done
	417	if [[ $answer = n \|\| $answer = N ]]
	418	then
	419	locat=user_abort; exit
	420	fi
	421	fi
	422
	423
	424
	425
	426	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
	427	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
	428	printf "\n *** scanning configuration file for host(s) ..."
	429
[215]	430	grep %fopts $config_file > $tmp_mbuild
[69]	431	while read line
[1]	432	do
	433	# KOMMENTARZEILEN UEBERSPRINGEN
	434	[[ $(echo $line \| cut -c1) = "#" ]] && continue
	435	(( ihost = ihost + 1 ))
	436	hostline[$ihost]="$line"
[215]	437	done < $tmp_mbuild
[1]	438
	439
	440	while (( ih < ihost ))
	441	do
	442
	443	(( ih = ih + 1 ))
	444
	445	# REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
	446	# NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
	447	# SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
	448	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
	449	remote_host=`echo $remote_host_string \| cut -d" " -f1`
	450	if [[ $host != all ]]
	451	then
	452	[[ $remote_host != $host ]] && continue
	453	fi
	454	host_found=true
	455	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
	456	if [[ $condition1 = $remote_host ]]
	457	then
	458	condition1=""
	459	else
	460	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
	461	fi
	462
[82]	463	netcdf_inc=""
	464	netcdf_lib=""
[1]	465
	466	# AUF HLRN-RECHNER NUR EINMAL UEBERSETZEN
	467	if [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
	468	then
	469	if [[ $ibm_hb_done = true ]]
	470	then
	471	printf "\n *** remote host \"$remote_host\" skipped since compilation has already"
	472	printf "\n been carried out on one of the HLRN machines\n"
	473	continue
	474	fi
	475	fi
	476
	477	# AUF LCMUK-RECHNER NUR EINMAL UEBERSETZEN
	478	if [[ $remote_host = lcmuk ]]
	479	then
	480	if [[ $lcmuk_done = true ]]
	481	then
	482	printf "\n *** local host \"$remote_host\" skipped since compilation has already"
	483	printf "\n been carried out on this host\n"
	484	continue
	485	fi
	486	fi
	487
	488
	489	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
	490	case $remote_host in
[116]	491	(lcmuk) remote_addres=130.75.105.2;;
[181]	492	(lcsgib) remote_addres=130.73.232.102;;
[210]	493	(lcsgih) remote_addres=130.75.4.103;;
[83]	494	(lctit) remote_addres=172.17.75.161;;
[206]	495	(lcxt4) remote_addres=129.177.20.113;;
[83]	496	(decalpha) remote_addres=165.132.26.56;;
	497	(ibmb) remote_addres=130.73.230.10;;
	498	(ibmh) remote_addres=130.75.4.10;;
	499	(ibms) remote_addres=150.183.5.101;;
	500	(ibmy) remote_addres=165.132.26.58;;
	501	(nech) remote_addres=136.172.44.192;;
	502	(neck) remote_addres=133.5.178.11;;
	503	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
	504	(*) if [[ $local_host != $remote_host ]]
[1]	505	then
[83]	506	printf "\n +++ remote host \"$remote_host\" unknown";
	507	printf "\n please inform S. Raasch!"
[1]	508	fi;;
	509	esac
	510
	511
	512	# REMOTE-USERNAMEN ERMITTELN
	513	line=""
[116]	514	found=false
[215]	515	grep "$remote_host_string" $config_file \| grep "%remote_username" > $tmp_mbuild
[69]	516	while read line1
[1]	517	do
[116]	518
[1]	519	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	520	then
	521	line="$line1"
	522	fi
[116]	523
	524	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	525	then
	526	remote_username=`echo $line \| cut -d" " -s -f2`
	527	found=true
	528	fi
	529
[215]	530	done < $tmp_mbuild
[1]	531
[116]	532	if [[ $found = false ]]
[1]	533	then
	534	printf "\n +++ no remote username found in configuration file"
	535	printf "\n for \"$remote_host_string\" "
	536	locat=config_file; exit
	537	fi
	538
	539
	540	# REMOTE-QUELLTEXTPFAD ERMITTELN
	541	line=""
[54]	542	remote_source_path=""
[215]	543	grep "$remote_host_string" $config_file \| grep "%source_path" > $tmp_mbuild
[69]	544	while read line1
[1]	545	do
[116]	546
[1]	547	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	548	then
	549	line="$line1"
	550	fi
[116]	551
	552	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	553	then
	554	remote_source_path=`echo $line \| cut -d" " -s -f2`
	555	fi
	556
[215]	557	done < $tmp_mbuild
[1]	558
	559	if [[ "$remote_source_path" = "" ]]
	560	then
	561	if [[ "$global_source_path" != "" ]]
	562	then
	563	remote_source_path=$global_source_path
	564	else
	565	printf "\n +++ no source path found in configuration file"
	566	printf "\n for \"$remote_host_string\" "
	567	locat=config_file; exit
	568	fi
	569	fi
	570
[22]	571	remote_ud=${remote_source_path}/../UTIL
[24]	572	remote_ud=$(eval echo $remote_ud)
[1]	573
[54]	574
[1]	575	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
[54]	576	remote_md=""
[1]	577	line=""
[215]	578	grep "$remote_host_string" $config_file \| grep "%depository_path" > $tmp_mbuild
[69]	579	while read line1
[1]	580	do
[116]	581
[1]	582	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	583	then
	584	line="$line1"
	585	fi
[116]	586
	587	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	588	then
	589	remote_md=`echo $line \| cut -d" " -s -f2`
	590	fi
	591
[215]	592	done < $tmp_mbuild
[1]	593
	594	if [[ "$remote_md" = "" ]]
	595	then
	596	if [[ "$global_depository_path" != "" ]]
	597	then
	598	remote_md=$global_depository_path
	599	else
	600	printf "\n +++ no depository path found in configuration file"
	601	printf "\n for \"$remote_host_string\" "
	602	printf "\n please set \"\%depository_path\" in configuration file"
	603	locat=config_file; exit
	604	fi
	605	fi
	606
[8]	607	remote_md=$(eval echo $remote_md)
[215]	608	[[ "$condition1" != "" ]] && remote_md=${remote_md}_$condition1
	609	[[ "$condition2" != "" ]] && remote_md=${remote_md}_$condition2
[1]	610
[8]	611
[1]	612	# COMPILERNAMEN ERMITTELN
	613	line=""
[116]	614	found=false
[215]	615	grep "$remote_host_string" $config_file \| grep "%compiler_name " > $tmp_mbuild
[69]	616	while read line1
[1]	617	do
[116]	618
[1]	619	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	620	then
	621	line="$line1"
	622	fi
[116]	623
	624	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	625	then
	626	compiler_name=`echo $line \| cut -d" " -s -f2`
	627	found=true
	628	fi
	629
[215]	630	done < $tmp_mbuild
[1]	631
[116]	632	if [[ $found = false ]]
[1]	633	then
	634	printf "\n +++ no compiler name found in configuration file"
	635	printf "\n for \"$remote_host_string\" "
	636	locat=config_file; exit
	637	fi
	638
	639
[27]	640	# BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
	641	# SERIELLER COMPILERNAME ERMITTELT WERDEN
	642	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
	643	then
	644	line=""
[116]	645	found=false
[215]	646	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" > $tmp_mbuild
[69]	647	while read line1
[27]	648	do
[116]	649
[27]	650	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	651	then
	652	line="$line1"
	653	fi
[116]	654
	655	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	656	then
	657	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
	658	found=true
	659	fi
	660
[215]	661	done < $tmp_mbuild
[1]	662
[116]	663	if [[ $found = false ]]
[27]	664	then
[28]	665	printf "\n +++ no serial compiler name found in configuration file"
[27]	666	printf "\n for \"$remote_host_string\" "
	667	locat=config_file; exit
	668	fi
	669	else
	670	compiler_name_ser=$compiler_name
	671	fi
	672
	673
	674
[82]	675	# PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
	676	line=""
[116]	677	found=false
[215]	678	grep "$remote_host_string" $config_file \| grep "%cpp_options" > $tmp_mbuild
[82]	679	while read line1
	680	do
[116]	681
[82]	682	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	683	then
	684	line="$line1"
	685	fi
[116]	686
	687	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	688	then
	689	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	690	cpp_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	691	found=true
	692	fi
	693
[215]	694	done < $tmp_mbuild
[116]	695
	696	if [[ $found = false ]]
[82]	697	then
	698	printf "\n +++ no preprocessor options found in configuration file"
	699	printf "\n for \"$remote_host_string\" "
	700	locat=config_file; exit
	701	fi
	702
[116]	703
[82]	704	# RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
	705	for string in $remote_host_string
	706	do
	707	if [[ $(echo $remote_host \| cut -c1-2) = lc && $(echo $string \| cut -c1-2) = lc ]]
	708	then
	709	cpp_options="$cpp_options -D__lc "
[83]	710	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $(echo $string \| cut -c1-3) = ibm ]]
	711	then
	712	cpp_options="${cpp_options},-D__ibm"
	713	elif [[ $(echo $remote_host \| cut -c1-3) = nec && $(echo $string \| cut -c1-3) = nec ]]
	714	then
	715	cpp_options="${cpp_options} -D__nec"
[82]	716	else
[83]	717	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
	718	then
	719	cpp_options="${cpp_options},-D__$string"
	720	else
	721	cpp_options="$cpp_options -D__$string "
	722	fi
[82]	723	fi
	724	done
	725
	726
	727
	728	# NETCDF-OPTIONEN ERMITTELN
	729	line=""
[215]	730	grep "$remote_host_string" $config_file \| grep "%netcdf_inc" > $tmp_mbuild
[82]	731	while read line1
	732	do
[116]	733
[82]	734	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	735	then
	736	line="$line1"
	737	fi
[116]	738
	739	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	740	then
	741	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	742	netcdf_inc=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	743	fi
	744
[215]	745	done < $tmp_mbuild
[82]	746
	747	line=""
[215]	748	grep "$remote_host_string" $config_file \| grep "%netcdf_lib" > $tmp_mbuild
[82]	749	while read line1
	750	do
[116]	751
[82]	752	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	753	then
	754	line="$line1"
	755	fi
[116]	756
	757	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	758	then
	759	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	760	netcdf_lib=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	761	fi
	762
[215]	763	done < $tmp_mbuild
[82]	764
	765
	766
[1]	767	# COMPILEROPTIONEN ERMITTELN
	768	line=""
[116]	769	found=false
[215]	770	grep "$remote_host_string" $config_file \| grep "%fopts" > $tmp_mbuild
[69]	771	while read line1
[1]	772	do
[116]	773
[1]	774	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	775	then
	776	line="$line1"
	777	fi
[116]	778
	779	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	780	then
	781	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	782	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	783	found=true
	784
	785	# NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
	786	compiler_options="$compiler_options $netcdf_inc"
	787	fi
	788
[215]	789	done < $tmp_mbuild
[116]	790
	791	if [[ $found = false ]]
[1]	792	then
	793	printf "\n +++ no compiler options found in configuration file"
	794	printf "\n for \"$remote_host_string\" "
	795	locat=config_file; exit
	796	fi
[82]	797
[1]	798
	799
	800	# LADER-OPTIONEN ERMITTELN
	801	line=""
[116]	802	found=false
[215]	803	grep "$remote_host_string" $config_file \| grep "%lopts" > $tmp_mbuild
[69]	804	while read line1
[1]	805	do
[116]	806
[1]	807	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	808	then
	809	line="$line1"
	810	fi
[116]	811
	812	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	813	then
	814	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	815	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	816	found=true
	817
	818	# NETCDF-LIBRARY HINZUFUEGEN
	819	loader_options="$loader_options $netcdf_lib"
	820	fi
	821
[215]	822	done < $tmp_mbuild
[1]	823
[116]	824	if [[ $found = false ]]
[1]	825	then
	826	printf "\n +++ no loader options found in configuration file"
	827	printf "\n for \"$remote_host_string\" "
	828	locat=config_file; exit
	829	fi
[82]	830
[1]	831
	832	printf "\n\n#------------------------------------------------------------------------# \n"
	833	if [[ $remote_host = $local_host ]]
	834	then
	835	column1="remote_host:"; column2="$remote_host (= local host!)"
	836	else
	837	column1="remote_host:"; column2=$remote_host
	838	fi
	839	printf "\| $column1$column2 \| \n"
	840	printf "\| \| \n"
	841	column1="conditions:"; column2="$condition1 $condition2"
	842	printf "\| $column1$column2 \| \n"
	843	column1="make depository:"; column2=$remote_md
	844	printf "\| $column1$column2 \| \n"
[215]	845	line=$(echo "$remote_md" \| cut -c51-)
	846	while [[ "$line" != "" ]]
	847	do
	848	column1=""
	849	column2=$line
	850	printf "\| $column1$column2 \| \n"
	851	line=$(echo "$line" \| cut -c51-)
	852	done
[25]	853	if [[ $compile_utility_programs = true ]]
	854	then
	855	column1="utility directory:"; column2=$remote_ud
	856	printf "\| $column1$column2 \| \n"
	857	fi
[1]	858	column1="username:"; column2=$remote_username
	859	printf "\| $column1$column2 \| \n"
	860	column1="addres:"; column2=$remote_addres
	861	printf "\| $column1$column2 \| \n"
	862	column1="compiler:"; column2=$compiler_name
	863	printf "\| $column1$column2 \| \n"
[28]	864	if [[ $compile_utility_programs = true ]]
	865	then
	866	column1="serial compiler:"; column2=$compiler_name_ser
	867	printf "\| $column1$column2 \| \n"
	868	fi
[1]	869	column1="cpp options:"; column2=$cpp_options
	870	printf "\| $column1$column2 \| \n"
	871	line=$(echo "$cpp_options" \| cut -c51-)
	872	while [[ "$line" != "" ]]
	873	do
	874	column1=""
	875	column2=$line
	876	printf "\| $column1$column2 \| \n"
	877	line=$(echo "$line" \| cut -c51-)
	878	done
	879	column1="compiler options:"; column2=$compiler_options
	880	printf "\| $column1$column2 \| \n"
	881	line=$(echo "$compiler_options" \| cut -c51-)
	882	while [[ "$line" != "" ]]
	883	do
	884	column1=""
	885	column2=$line
	886	printf "\| $column1$column2 \| \n"
	887	line=$(echo "$line" \| cut -c51-)
	888	done
	889	column1="loader options:"; column2=$loader_options
	890	printf "\| $column1$column2 \| \n"
	891	line=$(echo "$loader_options" \| cut -c51-)
	892	while [[ "$line" != "" ]]
	893	do
	894	column1=""
	895	column2=$line
	896	printf "\| $column1$column2 \| \n"
	897	line=$(echo "$line" \| cut -c51-)
	898	done
	899	printf "#------------------------------------------------------------------------# \n"
	900
	901	if [[ $silent = false ]]
	902	then
	903	answer=dummy
	904	printf "\n\n"
	905	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
	906	do
	907	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
	908	read answer
	909	done
	910	if [[ $answer = a \|\| $answer = A ]]
	911	then
	912	locat=user_abort; exit
	913	fi
	914	if [[ $answer = c \|\| $answer = C ]]
	915	then
	916	silent=false
	917	fi
	918	if [[ $answer = s \|\| $answer = S ]]
	919	then
	920	continue
	921	fi
	922	fi
	923
	924
	925	if [[ $remote_mode = batch ]]
	926	then
	927
	928	# BATCH-JOB PARAMETER SETZEN
	929	case $remote_host in
	930	(t3eb) queue=berte; memory=60; cputime=1000; xoption="-X 0";;
	931	(t3eh) queue=comp_t3e; memory=60; cputime=360;;
	932	(t3ej2) queue=normal; memory=60; cputime=1000; xoption="-X 0";;
[5]	933	(t3ej5\|ground.yonsei.ac.kr) printf "\n --- remote host \"$remote_host\" does not allow batch jobs"; continue;;
[1]	934	esac
	935
	936
	937	# BATCH-JOB ZUSAMMENSTELLEN
	938	printf "\n *** creating batch-job for remote host"
	939	echo " " > mbuild_job
	940
	941	# AUF CRAY-RECHNERN IN JUELICH WIRD KEIN BENUTZER-PROFILE AUSGEFUEHRT
	942	# DIES WIRD HIER GETAN, UM PFADE USW. ZU SETZEN
	943	if [[ $remote_host = t3ej2 ]]
	944	then
	945	echo "set +vx" >> mbuild_job
	946	echo ". .profile" >> mbuild_job
	947	echo "set -x" >> mbuild_job
	948	fi
	949
	950	# AUF CRAY-RECHNERN GELADENE MODULE AUFLISTEN
	951	if [[ $host = t3eb \|\| $host = t3eh \|\| $host = t3ej2 ]]
	952	then
	953	echo "module list" >> mbuild_job
	954	fi
	955
	956
	957	# WECHSEL IN TEMPORAERES VERZEICHNIS
	958	echo "cd ${remote_md}" >> mbuild_job
	959
	960
	961	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	962	echo "scp ${local_username}@${local_addres}:~/modell/code_3dp/palm_current_version/${mainprog}_sources.tar ${mainprog}_sources.tar" >> mbuild_job
	963	# echo "[[ \$? != 0 ]] && (echo "+++ scp failed"; exit)" >> mbuild_job
	964
	965
	966	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
	967	echo "[[ -f ${mainprog}_current_version.tar ]] && tar -xvf ${mainprog}_current_version.tar" >> mbuild_job
	968
	969
	970	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
	971	echo "tar -xvf ${mainprog}_sources.tar" >> mbuild_job
	972
	973
	974	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	975	echo "make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " >> mbuild_job
	976	echo "chmod u+w *" >> mbuild_job
	977
	978	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
	979	echo "tar -cvf ${mainprog}_current_version.tar .f90 .o" >> mbuild_job
	980
	981
	982	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
	983	echo "make clean" >> mbuild_job
	984	echo "rm ${mainprog}_sources.tar" >> mbuild_job
	985	echo "rm *.f90 Makefile" >> mbuild_job
	986
	987
	988
	989	# JOB MITTELS SUBJOB STARTEN
	990	printf "\n *** sending batch job to remote host"
	991	# subjob $xoption -h $remote_host -q $queue -m $memory -t $cputime -v mbuild_job
	992
	993
	994	# JOBFILE LOESCHEN
	995	# rm aljob
	996
	997	else
	998
	999	if [[ $remote_host != $local_host ]]
	1000	then
	1001
[40]	1002	if [[ $compile_utility_programs = false ]]
[1]	1003	then
	1004
[40]	1005	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	1006	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
	1007	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
	1008	if [[ $remote_host != lctit ]]
	1009	then
	1010	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
	1011	else
[206]	1012	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
[40]	1013	# MIT SSH, DESHALB AUFRUF PER PIPE
	1014	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
	1015	fi
	1016	if [[ $local_host = decalpha ]]
	1017	then
[206]	1018	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
[40]	1019	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1020	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1021	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
[215]	1022	/bin/scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
[40]	1023	else
[215]	1024	scp ${local_source_path}/${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
[40]	1025	fi
[1]	1026
	1027
	1028
[40]	1029	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
	1030	echo " *** untar previous update on remote host, if existing"
	1031	if [[ $remote_host != lctit ]]
	1032	then
	1033	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
	1034	else
[206]	1035	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
[40]	1036	# MIT SSH, DESHALB AUFRUF PER PIPE
	1037	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
	1038	fi
[1]	1039
	1040
[40]	1041	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
	1042	echo " *** untar actual sources on remote host"
	1043	if [[ $remote_host != lctit ]]
	1044	then
	1045	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
	1046	else
[206]	1047	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
[40]	1048	# MIT SSH, DESHALB AUFRUF PER PIPE
	1049	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
	1050	fi
[1]	1051
	1052
[40]	1053	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1054	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
	1055	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
	1056	# Z.B. DIE PFADE ZUM COMPILER)
	1057	echo " *** execute \"make\" on remote host"
[1]	1058
[40]	1059	if [[ $remote_host = nech ]]
	1060	then
	1061	make_call_string="sxmake PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1062	else
	1063	make_call_string="make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1064	fi
	1065
	1066	if [[ $remote_host = t3eh ]]
	1067	then
[1]	1068
[40]	1069	print "xterm\nexit\n cd ${remote_md}; make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1070
[40]	1071	elif [[ $remote_host = t3ej2 \|\| $remote_host = ibms \|\| $remote_host = ibmy ]]
	1072	then
[1]	1073
[40]	1074	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1075
[40]	1076	elif [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
	1077	then
[1]	1078
[40]	1079	print "export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1080
[181]	1081	elif [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
	1082	then
	1083
[210]	1084	print ". /usr/share/modules/init/bash; module load mpt/1.21; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[196]	1085	# print ". /usr/share/modules/init/bash; module load mvapich2/1.2rc1-intel; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1086	# print ". /usr/share/modules/init/bash; module load mvapich2; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[181]	1087
[40]	1088	elif [[ $remote_host = lctit ]]
	1089	then
[1]	1090
[40]	1091	echo " " > ${remote_host}_last_make_protokoll
	1092	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
	1093	do
	1094	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1095	done
[1]	1096
[206]	1097	elif [[ $remote_host = lcxt4 ]]
	1098	then
	1099
	1100	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1101
[40]	1102	else
[1]	1103
[40]	1104	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1105
[40]	1106	fi
[1]	1107
[40]	1108	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
[1]	1109	then
[40]	1110	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
	1111	if [[ $silent = false ]]
	1112	then
	1113	answer=dummy
	1114	printf "\n"
	1115	while [[ "$answer" != c && "$answer" != k ]]
	1116	do
	1117	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
	1118	read answer
	1119	if [[ "$answer" = l ]]
	1120	then
	1121	more ${remote_host}_last_make_protokoll
	1122	fi
	1123	done
	1124	if [[ $answer = k ]]
[1]	1125	then
[40]	1126	locat=user_abort; exit
[1]	1127	fi
	1128	fi
	1129	fi
	1130
	1131
	1132
[40]	1133	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
	1134	printf "\n *** tar update on remote host ..."
	1135	if [[ $remote_host != lctit ]]
	1136	then
[181]	1137	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod"
[40]	1138	else
[206]	1139	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
[40]	1140	# MIT SSH, DESHALB AUFRUF PER PIPE
[181]	1141	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
[40]	1142	fi
[1]	1143
	1144
[40]	1145	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
	1146	# printf "\n *** \"make clean\" on remote host ..."
	1147	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
	1148	# printf "\n"
[1]	1149
	1150
[25]	1151
	1152
[22]	1153	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
	1154	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	1155	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
[40]	1156	elif [[ $compile_utility_programs = true ]]
[22]	1157	then
	1158
[24]	1159	printf "\n\n"
[27]	1160	echo " *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
	1161	cd ${local_source_path}/../SCRIPTS
[22]	1162
	1163	if [[ $remote_host != lctit ]]
	1164	then
[24]	1165	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
[22]	1166	else
[206]	1167	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
[22]	1168	# MIT SSH, DESHALB AUFRUF PER PIPE
[24]	1169	print "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_addres} 2>&1
[22]	1170	fi
	1171
[27]	1172	# KOPIEREN DER SCRIPTE
[22]	1173	if [[ $local_host = decalpha ]]
	1174	then
[206]	1175	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
[22]	1176	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1177	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1178	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
[27]	1179	/bin/scp batch_scp mbuild mrun subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
	1180	else
[28]	1181	scp batch_scp mbuild mrun subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
[27]	1182	fi
	1183
	1184	cd - > /dev/null
	1185	cd ${local_source_path}/../UTIL
	1186
	1187
	1188	# KOPIEREN DER UTILITY-PROGRAMME
	1189	if [[ $local_host = decalpha ]]
	1190	then
[206]	1191	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
[27]	1192	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1193	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1194	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
[24]	1195	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
[22]	1196	else
[24]	1197	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
[22]	1198	fi
	1199
	1200
	1201
	1202	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1203	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
	1204	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
	1205	# Z.B. DIE PFADE ZUM COMPILER)
	1206	echo " *** execute \"make\" on remote host"
	1207
	1208	if [[ $remote_host = nech ]]
	1209	then
[27]	1210	make_call_string="sxmake F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
[22]	1211	else
[27]	1212	make_call_string="make F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
[22]	1213	fi
	1214
	1215	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
	1216	then
	1217
[25]	1218	ssh ${remote_username}@${remote_addres} "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
[22]	1219
	1220	elif [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
	1221	then
	1222
[25]	1223	print "export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres}
[22]	1224
	1225	elif [[ $remote_host = lctit ]]
	1226	then
	1227
	1228	echo " " > ${remote_host}_last_make_protokoll
	1229	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
	1230	do
	1231	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1232	done
	1233
	1234	else
	1235
	1236	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1237
	1238	fi
	1239
	1240	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
	1241
[75]	1242	rm -rf ${remote_host}_last_make_protokoll
[22]	1243
[1]	1244	# NUR AUF EINEM HLRN-RECHNER UEBERSETZEN
	1245	[[ $remote_host = ibmb \|\| $remote_host = ibmh ]] && ibm_hb_done=true
	1246
	1247	else
	1248
[40]	1249	if [[ $compile_utility_programs = false ]]
	1250	then
[1]	1251
[215]	1252	# DEPOSITORY VERZEICHNIS ERZEUGEN, FALLS NOCH NICHT VORHANDEN
	1253	eval remote_md=$remote_md
	1254	if [[ ! -d $remote_md ]]
	1255	then
	1256	if mkdir $remote_md
	1257	then
	1258	printf "\n\n *** directory for make depository:"
	1259	printf "\n $remote_md"
	1260	printf "\n was created\n"
	1261	else
	1262	printf "\n +++ directory for make depository:"
	1263	printf "\n $remote_md"
	1264	printf "\n cannot be created"
	1265	locat=local_depository_path; exit
	1266	fi
	1267	fi
	1268
	1269	# QUELLTEXT-DATEIEN AUS REPOSITORY INS DEPOSITORY KOPIEREN
	1270	echo " "
	1271	echo " *** updating sources in $remote_md"
	1272	cd $remote_md
	1273	cp $local_source_path/${mainprog}_sources.tar .
	1274	tar xf ${mainprog}_sources.tar
	1275
[40]	1276	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
	1277	echo " "
	1278	echo " *** execute \"make\" on local host"
[1]	1279
[40]	1280	make PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
	1281
	1282	if [[ $? != 0 ]]
[1]	1283	then
[40]	1284	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
	1285	if [[ $silent = false ]]
	1286	then
	1287	answer=dummy
	1288	printf "\n"
	1289	while [[ "$answer" != c && "$answer" != k ]]
	1290	do
	1291	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
	1292	read answer
	1293	if [[ "$answer" = l ]]
	1294	then
	1295	more ${remote_host}_last_make_protokoll
	1296	fi
	1297	done
	1298	if [[ $answer = k ]]
[1]	1299	then
[40]	1300	locat=user_abort; exit
[1]	1301	fi
	1302	fi
	1303	fi
	1304
	1305
[40]	1306	# NEUE VERSION AUF LOKALEM RECHNER ZUSAMMENPACKEN
	1307	printf "\n *** tar update on local host ..."
	1308	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
[1]	1309
[22]	1310
	1311	# COMPILE THE UTILITY PROGRAMS
[40]	1312	elif [[ $compile_utility_programs = true ]]
[22]	1313	then
	1314	printf "\n\n"
	1315	echo " *** compiling the utility programs ..."
	1316	cd ${local_source_path}/../UTIL
[35]	1317	make F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
[22]	1318	cd - > /dev/null
	1319	fi
	1320
	1321
[1]	1322	# NUR EINMAL AUF LCMUK UEBERSETZEN
	1323	[[ $remote_host = lcmuk ]] && lcmuk_done=true
	1324
	1325	fi
	1326
	1327	fi
	1328	done
	1329
	1330
	1331	if [[ $host_found = false ]]
	1332	then
	1333	if [[ $host = all ]]
	1334	then
	1335	printf "\n +++ no hosts found in configuration file"
	1336	else
	1337	printf "\n +++ host \"$host\" not found in configuration file"
	1338	fi
	1339	locat=config_file; exit
	1340	fi
	1341
	1342
	1343
	1344	# ABSCHLIESSENDE ARBEITEN
	1345	rm -f hosts_found_in_config_file
	1346

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |