Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 214

Last change on this file since 214 was 210, checked in by raasch, 16 years ago
updates in dvr routines for new dvr version
Property svn:keywords set to `Id Rev`
File size: 55.5 KB

Rev	Line
[1]	1	#!/bin/ksh
[66]	2	# mbuild - Programmuebersetzungsscript
[169]	3	# $Id: mbuild 210 2008-11-06 08:54:02Z raasch $
[1]	4
	5	# Prozedur zur Uebersetzung von Programmteilen mittels make-Mechanismus
	6	# auf einem Remote-Rechner, ausgehend von Quellcode auf einem lokalen
	7	# Rechner
	8
	9	# Folgende Probleme existieren unter Linux, wenn keine AT&T-Korn-Shell
	10	# verwendet wird:
	11	# Wertzuweisungen an Variablen innerhalb von DO-Schleifen werden nicht
	12	# nach aussen weitergegeben. "while read line" funktioniert nicht
	13	# innerhalb einer Pipe.
	14
	15	# letzte Aenderung:
	16	# 06/05/02 - Siggi - Beginn der Entwicklung
	17	# 12/06/02 - Siggi - Abschluss der Entwicklungsarbeiten
	18	# 23/06/02 - Siggi - voerst kein make-clean, Abbruch bei batch-mode
	19	# 24/07/02 - Siggi - Keine Verwendung der temporaeren Datei tmp_mbuild
	20	# unter linux mehr noetig, da nun AT&T-Korn-Shell
	21	# benutzt wird
	22	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) validiert
	23	# 19/12/02 - Siggi - ibmb validiert
	24	# 05/02/03 - Siggi - hostname nobela included
	25	# 04/03/03 - Siggi - host nech included
	26	# 06/03/03 - Siggi - make_call_string is echoed without '' to
	27	# file LAST_MAKE_CALL (otherwise error on NEC, because
	28	# '' are part of compiler options
	29	# 16/03/03 - Siggi - Two underscores are placed in front of every define
	30	# string, in case that palm.f90 version contains
	31	# such strings
	32	# 16/04/03 - Siggi - First extensions for linux machines
	33	# 24/06/03 - Siggi - host orkan included
	34	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
	35	# 24/07/03 - Siggi - host maestro admitted
	36	# 06/08/03 - Siggi - host gregale admitted
	37	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
	38	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
	39	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
	40	# (-D$OMP=OMP) in order to avoid problems with
	41	# OMP_NUM_THREADS
	42	# 09/01/04 - Siggi - action above cancelled
	43	# 28/01/04 - Siggi - action above re-cancelled
	44	# 08/03/04 - Siggi - host scirocco admitted
	45	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
	46	# the respective .f90 file is not listed in the makefile
	47	# and deletion is demanded by the user
	48	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
	49	# due to error in ssh installation (otherwise a prompt
	50	# for the password appears)
	51	# 23/07/04 - Siggi - changes due to the new berni configuration
	52	# (federation switch)
	53	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
	54	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
	55	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
	56	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
	57	# 24/04/05 - Siggi - netcdf support on lcmuk
	58	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
	59	# 12/05/05 - Siggi - netcdf support on ibm
	60	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
	61	# 18/05/05 - Siggi - netcdf support on nec
	62	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
	63	# 23/05/05 - Siggi - netcdf support on ibms
	64	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
	65	# 30/06/05 - Siggi - netcdf support on bora
	66	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
	67	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
	68	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
	69	# host gfdl5 (ibmy) admitted
	70	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
	71	# 20/01/06 - Siggi - cpp directive for ibmy
	72	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
	73	# 10/02/06 - Siggi - modifications for scp on decalpha
	74	# 13/04/06 - Siggi - ostria admitted
	75	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
	76	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
	77	# 29/05/05 - Siggi - atmos (lcide) admitted
	78	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
	79	# 24/11/06 - Siggi - breva and levanto admitted
	80	# 07/02/07 - Siggi - adapted for RIAM (neck)
[5]	81	# 10/02/07 - Siggi - all hpmuk-related code removed
[40]	82	# 02/03/07 - Siggi - compilation of utility programs and transfer of
[27]	83	# scripts to remote hosts added (option -u)
[66]	84	# 14/03/07 - Siggi - fimm admitted, revision number added to terminal
	85	# output
[69]	86	# 16/03/07 - Siggi - adjustments (netcdf) for lctit
	87	# adjustments for running under pdksh, local ip-addres
	88	# is not determined any more
[82]	89	# 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
	90	# from configuration file
	91	# host identifier (local_host) is read from config file
[116]	92	# 10/10/07 - Siggi - bugfix: handling of comment lines
[181]	93	# 18/07/08 - Siggi - adapted for lcsgih
	94	# 21/07/08 - Siggi - mainprog (executable) is added to the tar-file
	95	# ({mainprog}_current_version)
[206]	96	# 02/10/08 - Siggi - adapted for lcxt4
[1]	97
	98
	99
	100	# VARIABLENVEREINBARUNGEN + DEFAULTWERTE
[22]	101	compile_utility_programs=false
[1]	102	config_file=.mrun.config
[67]	103	fimm=false
[1]	104	host=all
	105	host_found=false
	106	ibm_hb_done=false
	107	lcmuk_done=false
	108	locat=normal
	109	makefile=""
	110	remote_mode=interactive
	111	scirocco=false
	112	silent=false
	113	suf=f90
	114	update=false
[83]	115	working_directory=`pwd`
[1]	116
	117	typeset -i ih ihost=0
	118
[66]	119	typeset -R30 calltime
[1]	120	typeset -L20 column1
	121	typeset -L50 column2
	122	typeset -L70 column3
[201]	123	typeset -L40 version="MBUILD 2.0 Rev$Rev: 210 $"
[1]	124
	125	# FEHLERBEHANDLUNG
	126	# BEI EXIT:
[83]	127	trap 'rm -rf $working_directory/tmp_mbuild
[69]	128	if [[ $locat != normal ]]
[1]	129	then
	130	printf "\n\n +++ mbuild killed \n\n"
	131	else
	132	printf "\n\n *** mbuild finished \n\n"
	133	fi' exit
	134
	135
	136	# BEI TERMINAL-BREAK:
[83]	137	trap 'rm -rf $working_directory/tmp_mbuild
[69]	138	printf "\n\n +++ mbuild killed by \"^C\" \n\n"
[1]	139	exit
	140	' 2
	141
	142
	143
	144	# SHELLSCRIPT-OPTIONEN EINLESEN
[22]	145	while getopts :c:h:m:rs:u option
[1]	146	do
	147	case $option in
	148	(c) config_file=$OPTARG;;
	149	(h) host=$OPTARG;;
	150	(m) makefile=$OPTARG;;
	151	(r) remote_mode=batch;;
	152	(s) suf=$OPTARG;;
[22]	153	(u) compile_utility_programs=true;;
[1]	154	(\?) printf "\n +++ unknown option $OPTARG \n";
	155	locat=parameter; exit;;
	156	esac
	157	done
	158
	159
	160
	161	# BATCH-MODE IST ZUR ZEIT NICHT FUNKTIONSFAEHIG
	162	if [[ $remote_mode = batch ]]
	163	then
	164	printf "\n +++ sorry, batch mode does not work! \n"
	165	locat=parameter; exit
	166	fi
	167
	168
	169
[82]	170	# PRUEFEN, OB KONFIGURATIONS-DATEI VORHANDEN
	171	if [[ ! -f $config_file ]]
	172	then
	173	printf "\n +++ configuration file: "
	174	printf "\n $config_file"
	175	printf "\n does not exist"
	176	locat=configuration; exit
	177	fi
	178
	179
	180
[1]	181	# LOKALEN RECHNER ERMITTELN
	182	local_host_real_name=$(hostname)
[69]	183	# local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
	184
[1]	185
[82]	186
	187	# HOST-IDENTIFIER (local_host) AUS KONFIGURATIONSDATEI BESTIMMEN
	188	line=""
	189	grep "%host_identifier" $config_file > tmp_mbuild
	190	while read line
	191	do
[116]	192	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
[82]	193	then
	194	HOSTNAME=`echo $line \| cut -d" " -s -f2`
	195	host_identifier=`echo $line \| cut -d" " -s -f3`
[83]	196	if [[ $local_host_real_name = $HOSTNAME ]]
[82]	197	then
	198	local_host=$host_identifier
	199	break
	200	fi
	201	fi
	202	done < tmp_mbuild
	203
	204	if [[ "$local_host" = "" ]]
	205	then
	206	printf "\n +++ no host identifier found in configuration file \"$config_file\""
	207	printf "\n for local host \"$local_host_real_name\"."
	208	printf "\n Please add line"
	209	printf "\n \"\%host_identifier $local_host_real_name <identifier>\""
	210	printf "\n to the configuration file."
	211	locat=local_host; exit
	212	fi
	213
	214
	215
[1]	216	[[ $local_host_real_name = scirocco ]] && scirocco=true
[67]	217	[[ $local_host_real_name = fimm.bccs.uib.no ]] && fimm=true
[1]	218
	219
	220
	221	if [[ $local_host != ibms ]]
	222	then
	223	config_file=$PWD/$config_file
	224	else
	225	config_file=`pwd`/$config_file
	226	fi
	227
	228
	229
	230	# BENUTZERNAMEN AUF LOKALEM RECHNER AUS KONFIGURATIONSDATEI ERMITTELN
	231	line=""
[69]	232	grep " $local_host" $config_file \| grep "%remote_username" > tmp_mbuild
	233	while read line
[1]	234	do
[116]	235	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
[1]	236	then
	237	local_username=`echo $line \| cut -d" " -s -f2`
	238	fi
[69]	239	done < tmp_mbuild
[1]	240
[82]	241
[1]	242	if [[ "$local_username" = "" ]]
	243	then
	244	printf "\n +++ no user name found in configuration file"
	245	printf "\n for local host \"$local_host\" "
	246	locat=config_file; exit
	247	fi
	248
	249
[5]	250	# LOKALEN QUELLTEXTPFAD ERMITTELN.
	251	# ZUERST PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD FUER ALLE RECHNER
	252	# VEREINBART WURDE.
	253	# DAZU ZUNAECHST ALLE IN DER KONFIGURATIONSDATEI VEREINBARTEN GLOBALEN
	254	# VARIABLEN SETZEN, WEIL DIESE EVTL. IN PFADNAMEN VERWENDET WERDEN
	255	line=""
[69]	256	grep "%" $config_file > tmp_mbuild
	257	while read line
[5]	258	do
[116]	259	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" && $(echo $line \| cut -c1) != "#" ]]
[1]	260	then
[5]	261	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
	262	value=`echo $line \| cut -d" " -s -f2`
[8]	263	eval export $var=\$value
[9]	264	# eval echo \" $var=\$$var \" # AUSGABE ZU TESTZWECKEN
[1]	265	fi
[69]	266	done < tmp_mbuild
[1]	267
[5]	268	# NUN PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD VEREINBART WURDE
[1]	269	line=""
[69]	270	grep "%source_path" $config_file > tmp_mbuild
	271	while read line
[1]	272	do
	273	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	274	then
	275	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
	276	then
	277	global_source_path=`echo $line \| cut -d" " -s -f2`
	278	fi
	279	fi
[69]	280	done < tmp_mbuild
[1]	281
	282	line=""
[69]	283	grep " $local_host" $config_file \| grep "%source_path" > tmp_mbuild
	284	while read line
[1]	285	do
	286	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	287	then
	288	local_source_path=`echo $line \| cut -d" " -s -f2`
	289	fi
[69]	290	done < tmp_mbuild
[1]	291
	292	if [[ "$local_source_path" = "" ]]
	293	then
	294	if [[ "$global_source_path" != "" ]]
	295	then
	296	local_source_path=$global_source_path
	297	else
	298	printf "\n +++ no source path found in configuration file"
	299	printf "\n for local host \"$local_host\" "
	300	printf "\n please set \"\%source_path\" in configuration file"
	301	locat=config_file; exit
	302	fi
	303	fi
	304	eval local_source_path=$local_source_path
[8]	305	eval local_source_path=$local_source_path
[1]	306
	307
	308	# EBENSO PFAD FUER DAS MAKE-DEPOSITORY ERMITTELN
	309	line=""
[69]	310	grep "%depository_path" $config_file > tmp_mbuild
	311	while read line
[1]	312	do
	313	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	314	then
	315	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
	316	then
	317	global_depository_path=`echo $line \| cut -d" " -s -f2`
	318	fi
	319	fi
[69]	320	done < tmp_mbuild
[1]	321
	322	line=""
[69]	323	grep " $local_host" $config_file \| grep "%depository_path" > tmp_mbuild
	324	while read line
[1]	325	do
	326	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	327	then
	328	local_depository_path=`echo $line \| cut -d" " -s -f2`
	329	fi
[69]	330	done < tmp_mbuild
[1]	331
	332	if [[ "$local_depository_path" = "" ]]
	333	then
	334	if [[ "$global_depository_path" != "" ]]
	335	then
	336	local_depository_path=$global_depository_path
	337	else
	338	printf "\n +++ no depository path found in configuration file"
	339	printf "\n for local host \"$local_host\" "
	340	printf "\n please set \"\%depository_path\" in configuration file"
	341	locat=config_file; exit
	342	fi
	343	fi
	344	eval local_depository_path=$local_depository_path
[8]	345	eval local_depository_path=$local_depository_path
[1]	346
	347
	348
[5]	349	# PRUEFEN, OB IN KONFIGURATIONSDATEI EIN HAUPTPROGRAMM
	350	# VEREINBART WURDE
	351	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
	352	then
	353	printf "\n +++ no main program or more than one main program defined"
	354	printf "\n in configuration file"
	355	locat=configuration; exit
	356	else
	357	line=`grep "%mainprog" $config_file`
	358	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
	359	then
	360	printf "\n +++ no main program defined in configuration file"
	361	locat=configuration; exit
	362	fi
	363	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
	364	fi
	365
	366
	367
[1]	368	# MAKEFILE vorhanden
	369	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
	370	if [[ ! -f $makefile ]]
	371	then
	372	printf "\n +++ makefile: "
	373	printf "\n $makefile"
	374	printf "\n does not exist"
	375	locat=makefile; exit
	376	fi
	377
	378
	379	# HEADER-AUSGABE (TEIL1: MELDUNGEN UEBER LOKALEN RECHNER)
	380	calltime=$(date)
	381	printf "\n"
	382	printf "#------------------------------------------------------------------------# \n"
	383	printf "\| $version$calltime \| \n"
	384	printf "\| \| \n"
	385	column1="called on:"; column2=$local_host_real_name
	386	printf "\| $column1$column2 \| \n"
	387	column1="local username:"; column2=$local_username
	388	printf "\| $column1$column2 \| \n"
	389	column1="local IP-addres:"; column2=$local_addres
	390	printf "\| $column1$column2 \| \n"
	391	column1="config file:"; column2=$config_file
	392	printf "\| $column1$column2 \| \n"
	393	column1="makefile:"; column2=$makefile
	394	printf "\| $column1$column2 \| \n"
	395	column1="local source path:"; column2=$local_source_path
	396	printf "\| $column1$column2 \| \n"
	397	column1="make depository:"; column2=$local_depository_path
	398	printf "\| $column1$column2 \| \n"
	399	printf "#------------------------------------------------------------------------# \n"
	400
	401	# printf "\| \| \n"
	402
	403
[40]	404	if [[ $compile_utility_programs = false ]]
	405	then
[1]	406
[40]	407	cd $local_source_path
[1]	408
	409
[40]	410	# LISTE DER ZU PRUEFENDEN QUELLTEXTDATEIEN ERSTELLEN
	411	source_code_files=`ls -1 *.$suf`
[1]	412
	413
[40]	414
	415	# VERZEICHNIS FUER DAS MAKE-DEPOSITORY ERZEUGEN,
	416	# FALLS NOCH NICHT VORHANDEN. ANSONSTEN ALLE DATEIEN
	417	# NEUEREN DATUMS IN DIESES VERZEICHNIS KOPIEREN
	418	if [[ ! -d $local_depository_path ]]
[1]	419	then
[40]	420	if mkdir $local_depository_path
	421	then
	422	printf "\n\n *** directory for make depository:"
	423	printf "\n $local_depository_path"
	424	printf "\n was created\n"
[1]	425
[40]	426	# MAKEFILE UND QUELLTEXTDATEIEN UNTER BEIBEHALTUNG
	427	# IHRES DATUMS INS VERZEICHNIS KOPIEREN
	428	printf "\n *** makefile and source code files are copied to"
	429	printf "\n $local_depository_path\n"
	430	printf "\n copying makefile \"$makefile\" ..."
	431	cp -p $makefile $local_depository_path/Makefile
[1]	432
[40]	433	# QUELLTEXTDATEIEN MUESSEN IM MAKEFILE AUFGEFUEHRT
	434	# SEIN
	435	for filename in $source_code_files
	436	do
	437	if [[ $(grep -c $filename $makefile) = 0 ]]
	438	then
	439	printf "\n +++ source code file:"
	440	printf "\n $filename"
	441	printf "\n is not listed in makefile"
	442	locat=makefile; exit
	443	else
	444	printf "\n copying source code file \"$filename\" ..."
	445	cp -p $filename $local_depository_path
	446	fi
	447	done
	448	printf "\n"
	449	else
	450	printf "\n +++ directory for make depository:"
	451	printf "\n $local_depository_path"
	452	printf "\n cannot be created"
	453	locat=local_depository_path; exit
	454	fi
	455	else
	456
	457	printf "\n *** checking file status ..."
	458
	459	# MAKEFILE KOPIEREN, FALLS NEUEREN DATUMS
	460	if [[ $makefile -nt $local_depository_path/Makefile ]]
	461	then
	462	printf "\n *** update of \"$makefile\" "
	463	cp -f -p $makefile $local_depository_path/Makefile
	464	update=true
	465
	466	# PRUEFEN, OB ALLE DATEIEN IM DEPOSITORY AUCH IM NEUEN MAKEFILE
	467	# VERZEICHNET SIND UND GEGEBENENFALLS DATEIEN LOESCHEN
	468	cd $local_depository_path
	469	source_code_files_in_depository=`ls -1 *.$suf`
	470	for filename in $source_code_files_in_depository
	471	do
	472	if [[ $(grep -c $filename Makefile) = 0 ]]
	473	then
	474	printf "\n *** source code file in \"$local_depository_path\":"
	475	printf "\n $filename"
	476	printf "\n is not listed in makefile"
	477	if [[ $silent = false ]]
	478	then
	479	answer=dummy
	480	printf "\n\n"
	481	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
	482	do
	483	printf " >>> delete \"$filename\" in \"$local_depository_path\" (y/n) ? "
	484	read answer
	485	done
	486	if [[ $answer = y \|\| $answer = Y ]]
	487	then
	488	base=`echo $filename \| cut -d. -f2`
	489	rm -f $filename
	490	rm -f ${base}.o ${base}.mod
	491	printf "\n *** \"$filename\" deleted in \"$local_depository_path\" "
	492	else
	493	printf "\n *** \"$filename\" not deleted in \"$local_depository_path\" "
	494	fi
	495	fi
	496	fi
	497	done
	498	cd - > /dev/null 2>&1
	499
	500	elif [[ $local_depository_path/Makefile -nt $makefile ]]
	501	then
	502	printf "\n *** makefile in depository is newer than"
	503	printf "\n \"$makefile\" "
	504	if [[ $silent = false ]]
	505	then
	506	answer=dummy
	507	printf "\n\n"
	508	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
	509	do
	510	printf " >>> update \"$makefile\" (y/n) ? "
	511	read answer
	512	done
	513	if [[ $answer = y \|\| $answer = Y ]]
	514	then
	515	cp -f -p $local_depository_path/Makefile $makefile
	516	printf "\n *** \"$makefile\" updated"
	517	else
	518	printf "\n *** \"$makefile\" not updated"
	519	fi
	520	fi
	521	fi
	522
	523	# QUELLTEXTDATEIEN KOPIEREN, FALLS NEUEREN DATUMS
	524	# SIE MUESSEN IM MAKEFILE AUFGEFUEHRT SEIN
[1]	525	for filename in $source_code_files
	526	do
	527	if [[ $(grep -c $filename $makefile) = 0 ]]
	528	then
	529	printf "\n +++ source code file:"
	530	printf "\n $filename"
	531	printf "\n is not listed in makefile"
	532	locat=makefile; exit
	533	else
[40]	534	if [[ ! -f $local_depository_path/$filename ]]
	535	then
	536	cp -p $filename $local_depository_path
	537	printf "\n *** source code file \"$filename\" created in \"$local_depository_path\" "
	538	fi
	539	if [[ $filename -nt $local_depository_path/$filename ]]
	540	then
	541	printf "\n *** update of source code file \"$filename\" "
	542	cp -f -p $filename $local_depository_path
	543	update=true
	544	fi
[1]	545	fi
	546	done
	547
	548
[40]	549	# PRUEFEN, OB ALLE DATEIEN IM DEPOSITORY IM AKTUELLEN ARBEITSVERZEICHNIS VORHANDEN
	550	# ODER EVTL. NEUEREN DATUMS SIND
[1]	551	cd $local_depository_path
	552	source_code_files_in_depository=`ls -1 *.$suf`
[40]	553	cd - > /dev/null 2>&1
[1]	554	for filename in $source_code_files_in_depository
	555	do
[40]	556	if [[ ! -f $filename ]]
[1]	557	then
[40]	558	printf "\n *** source code file \"$filename\" does not exist in current directory"
[1]	559	if [[ $silent = false ]]
	560	then
	561	answer=dummy
	562	printf "\n\n"
	563	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
	564	do
[40]	565	printf " >>> create \"$filename\" in current directory (y/n) ? "
[1]	566	read answer
	567	done
	568	if [[ $answer = y \|\| $answer = Y ]]
	569	then
[40]	570	cp -p $local_depository_path/$filename $filename
	571	printf "\n *** source code file \"$filename\" created in current directory"
[1]	572	else
[40]	573	printf "\n *** source code file \"$filename\" not created in current directory"
[1]	574	fi
	575	fi
[40]	576	elif [[ $local_depository_path/$filename -nt $filename ]]
[1]	577	then
[40]	578	ls -al $local_depository_path/$filename
	579	ls -al $filename
	580	printf "\n *** source code file \"$filename\" in depository is newer than in current directory"
	581	if [[ $silent = false ]]
[1]	582	then
[40]	583	answer=dummy
	584	printf "\n\n"
	585	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
	586	do
	587	printf " >>> update \"$filename\" in current directory (y/n) ? "
	588	read answer
	589	done
	590	if [[ $answer = y \|\| $answer = Y ]]
	591	then
	592	cp -f -p $local_depository_path/$filename $filename
	593	printf "\n *** source code file \"$filename\" updated in current directory"
	594	else
	595	printf "\n *** source code file \"$filename\" not updated in current directory"
	596	fi
[1]	597	fi
	598	fi
[40]	599	done
	600
	601	if [[ $update = false ]]
[1]	602	then
[40]	603	printf "\n *** no updates necessary in \"$local_depository_path\" "
[1]	604	if [[ $silent = false ]]
	605	then
	606	answer=dummy
	607	printf "\n\n"
	608	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
	609	do
[40]	610	printf " >>> continue with updates on remote hosts (y/n) ? "
[1]	611	read answer
	612	done
[40]	613	if [[ $answer = n \|\| $answer = N ]]
[1]	614	then
[40]	615	locat=user_abort; exit
[1]	616	fi
	617	fi
	618	fi
	619	fi
	620
	621
	622
[40]	623	# QUELLTEXTDATEIEN UND MAKEFILE MIT TAR ZUSAMMENBINDEN
	624	# IN JEDEM FALL ALLEN DATEIEN WRITE-PERMIT GEBEN, DAMIT ES AUF
	625	# DEN REMOTE-RECHNERN NICHT EVTL. ZU PROBLEMEN BEIM UEBERSCHREIBEN KOMMT
	626	printf "\n\n *** tar of makefile and source files in depository ..."
	627	cd $local_depository_path
	628	chmod u+w Makefile *.$suf
	629	tar -cf ${mainprog}_sources.tar Makefile *.$suf
	630	printf "\n"
[1]	631
[40]	632	fi
[1]	633
	634
[40]	635
[1]	636	# BESTAETIGUNG ZUM WEITERMACHEN EINHOLEN
	637	if [[ $host = all ]]
	638	then
	639	printf "\n *** updates will be made for ALL hosts found in"
	640	printf "\n the configuration file"
	641	else
	642	printf "\n *** update will be made for host \"$host\" "
	643	fi
	644
	645	if [[ $silent = false ]]
	646	then
	647	answer=dummy
	648	printf "\n\n"
	649	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
	650	do
	651	printf " >>> continue (y/n) ? "
	652	read answer
	653	done
	654	if [[ $answer = n \|\| $answer = N ]]
	655	then
	656	locat=user_abort; exit
	657	fi
	658	fi
	659
	660
	661
	662
	663	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
	664	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
	665	printf "\n *** scanning configuration file for host(s) ..."
	666
[69]	667	grep %fopts $config_file > tmp_mbuild
	668	while read line
[1]	669	do
	670	# KOMMENTARZEILEN UEBERSPRINGEN
	671	[[ $(echo $line \| cut -c1) = "#" ]] && continue
	672	(( ihost = ihost + 1 ))
	673	hostline[$ihost]="$line"
[69]	674	done < tmp_mbuild
[1]	675
	676
	677	while (( ih < ihost ))
	678	do
	679
	680	(( ih = ih + 1 ))
	681
	682	# REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
	683	# NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
	684	# SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
	685	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
	686	remote_host=`echo $remote_host_string \| cut -d" " -f1`
	687	if [[ $host != all ]]
	688	then
	689	[[ $remote_host != $host ]] && continue
	690	fi
	691	host_found=true
	692	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
	693	if [[ $condition1 = $remote_host ]]
	694	then
	695	condition1=""
	696	else
	697	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
	698	fi
	699
[82]	700	netcdf_inc=""
	701	netcdf_lib=""
[1]	702
	703	# AUF HLRN-RECHNER NUR EINMAL UEBERSETZEN
	704	if [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
	705	then
	706	if [[ $ibm_hb_done = true ]]
	707	then
	708	printf "\n *** remote host \"$remote_host\" skipped since compilation has already"
	709	printf "\n been carried out on one of the HLRN machines\n"
	710	continue
	711	fi
	712	fi
	713
	714	# AUF LCMUK-RECHNER NUR EINMAL UEBERSETZEN
	715	if [[ $remote_host = lcmuk ]]
	716	then
	717	if [[ $lcmuk_done = true ]]
	718	then
	719	printf "\n *** local host \"$remote_host\" skipped since compilation has already"
	720	printf "\n been carried out on this host\n"
	721	continue
	722	fi
	723	fi
	724
	725
	726	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
	727	case $remote_host in
[116]	728	(lcmuk) remote_addres=130.75.105.2;;
[181]	729	(lcsgib) remote_addres=130.73.232.102;;
[210]	730	(lcsgih) remote_addres=130.75.4.103;;
[83]	731	(lctit) remote_addres=172.17.75.161;;
[206]	732	(lcxt4) remote_addres=129.177.20.113;;
[83]	733	(decalpha) remote_addres=165.132.26.56;;
	734	(ibmb) remote_addres=130.73.230.10;;
	735	(ibmh) remote_addres=130.75.4.10;;
	736	(ibms) remote_addres=150.183.5.101;;
	737	(ibmy) remote_addres=165.132.26.58;;
	738	(nech) remote_addres=136.172.44.192;;
	739	(neck) remote_addres=133.5.178.11;;
	740	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
	741	(*) if [[ $local_host != $remote_host ]]
[1]	742	then
[83]	743	printf "\n +++ remote host \"$remote_host\" unknown";
	744	printf "\n please inform S. Raasch!"
[1]	745	fi;;
	746	esac
	747
	748
	749	# REMOTE-USERNAMEN ERMITTELN
	750	line=""
[116]	751	found=false
[69]	752	grep "$remote_host_string" $config_file \| grep "%remote_username" > tmp_mbuild
	753	while read line1
[1]	754	do
[116]	755
[1]	756	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	757	then
	758	line="$line1"
	759	fi
[116]	760
	761	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	762	then
	763	remote_username=`echo $line \| cut -d" " -s -f2`
	764	found=true
	765	fi
	766
[69]	767	done < tmp_mbuild
[1]	768
[116]	769	if [[ $found = false ]]
[1]	770	then
	771	printf "\n +++ no remote username found in configuration file"
	772	printf "\n for \"$remote_host_string\" "
	773	locat=config_file; exit
	774	fi
	775
	776
	777	# REMOTE-QUELLTEXTPFAD ERMITTELN
	778	line=""
[54]	779	remote_source_path=""
[69]	780	grep "$remote_host_string" $config_file \| grep "%source_path" > tmp_mbuild
	781	while read line1
[1]	782	do
[116]	783
[1]	784	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	785	then
	786	line="$line1"
	787	fi
[116]	788
	789	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	790	then
	791	remote_source_path=`echo $line \| cut -d" " -s -f2`
	792	fi
	793
[69]	794	done < tmp_mbuild
[1]	795
	796	if [[ "$remote_source_path" = "" ]]
	797	then
	798	if [[ "$global_source_path" != "" ]]
	799	then
	800	remote_source_path=$global_source_path
	801	else
	802	printf "\n +++ no source path found in configuration file"
	803	printf "\n for \"$remote_host_string\" "
	804	locat=config_file; exit
	805	fi
	806	fi
	807
[22]	808	remote_ud=${remote_source_path}/../UTIL
[24]	809	remote_ud=$(eval echo $remote_ud)
[1]	810
[54]	811
[1]	812	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
[54]	813	remote_md=""
[1]	814	line=""
[69]	815	grep "$remote_host_string" $config_file \| grep "%depository_path" > tmp_mbuild
	816	while read line1
[1]	817	do
[116]	818
[1]	819	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	820	then
	821	line="$line1"
	822	fi
[116]	823
	824	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	825	then
	826	remote_md=`echo $line \| cut -d" " -s -f2`
	827	fi
	828
[69]	829	done < tmp_mbuild
[1]	830
	831	if [[ "$remote_md" = "" ]]
	832	then
	833	if [[ "$global_depository_path" != "" ]]
	834	then
	835	remote_md=$global_depository_path
	836	else
	837	printf "\n +++ no depository path found in configuration file"
	838	printf "\n for \"$remote_host_string\" "
	839	printf "\n please set \"\%depository_path\" in configuration file"
	840	locat=config_file; exit
	841	fi
	842	fi
	843
[8]	844	remote_md=$(eval echo $remote_md)
[1]	845
[8]	846
[1]	847	# COMPILERNAMEN ERMITTELN
	848	line=""
[116]	849	found=false
[69]	850	grep "$remote_host_string" $config_file \| grep "%compiler_name " > tmp_mbuild
	851	while read line1
[1]	852	do
[116]	853
[1]	854	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	855	then
	856	line="$line1"
	857	fi
[116]	858
	859	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	860	then
	861	compiler_name=`echo $line \| cut -d" " -s -f2`
	862	found=true
	863	fi
	864
[69]	865	done < tmp_mbuild
[1]	866
[116]	867	if [[ $found = false ]]
[1]	868	then
	869	printf "\n +++ no compiler name found in configuration file"
	870	printf "\n for \"$remote_host_string\" "
	871	locat=config_file; exit
	872	fi
	873
	874
[27]	875	# BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
	876	# SERIELLER COMPILERNAME ERMITTELT WERDEN
	877	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
	878	then
	879	line=""
[116]	880	found=false
[69]	881	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" > tmp_mbuild
	882	while read line1
[27]	883	do
[116]	884
[27]	885	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	886	then
	887	line="$line1"
	888	fi
[116]	889
	890	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	891	then
	892	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
	893	found=true
	894	fi
	895
[69]	896	done < tmp_mbuild
[1]	897
[116]	898	if [[ $found = false ]]
[27]	899	then
[28]	900	printf "\n +++ no serial compiler name found in configuration file"
[27]	901	printf "\n for \"$remote_host_string\" "
	902	locat=config_file; exit
	903	fi
	904	else
	905	compiler_name_ser=$compiler_name
	906	fi
	907
	908
	909
[82]	910	# PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
	911	line=""
[116]	912	found=false
[82]	913	grep "$remote_host_string" $config_file \| grep "%cpp_options" > tmp_mbuild
	914	while read line1
	915	do
[116]	916
[82]	917	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	918	then
	919	line="$line1"
	920	fi
[116]	921
	922	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	923	then
	924	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	925	cpp_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	926	found=true
	927	fi
	928
[82]	929	done < tmp_mbuild
[116]	930
	931	if [[ $found = false ]]
[82]	932	then
	933	printf "\n +++ no preprocessor options found in configuration file"
	934	printf "\n for \"$remote_host_string\" "
	935	locat=config_file; exit
	936	fi
	937
[116]	938
[82]	939	# RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
	940	for string in $remote_host_string
	941	do
	942	if [[ $(echo $remote_host \| cut -c1-2) = lc && $(echo $string \| cut -c1-2) = lc ]]
	943	then
	944	cpp_options="$cpp_options -D__lc "
[83]	945	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $(echo $string \| cut -c1-3) = ibm ]]
	946	then
	947	cpp_options="${cpp_options},-D__ibm"
	948	elif [[ $(echo $remote_host \| cut -c1-3) = nec && $(echo $string \| cut -c1-3) = nec ]]
	949	then
	950	cpp_options="${cpp_options} -D__nec"
[82]	951	else
[83]	952	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
	953	then
	954	cpp_options="${cpp_options},-D__$string"
	955	else
	956	cpp_options="$cpp_options -D__$string "
	957	fi
[82]	958	fi
	959	done
	960
	961
	962
	963	# NETCDF-OPTIONEN ERMITTELN
	964	line=""
	965	grep "$remote_host_string" $config_file \| grep "%netcdf_inc" > tmp_mbuild
	966	while read line1
	967	do
[116]	968
[82]	969	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	970	then
	971	line="$line1"
	972	fi
[116]	973
	974	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	975	then
	976	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	977	netcdf_inc=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	978	fi
	979
[82]	980	done < tmp_mbuild
	981
	982	line=""
	983	grep "$remote_host_string" $config_file \| grep "%netcdf_lib" > tmp_mbuild
	984	while read line1
	985	do
[116]	986
[82]	987	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	988	then
	989	line="$line1"
	990	fi
[116]	991
	992	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	993	then
	994	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	995	netcdf_lib=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	996	fi
	997
[82]	998	done < tmp_mbuild
	999
	1000
	1001
[1]	1002	# COMPILEROPTIONEN ERMITTELN
	1003	line=""
[116]	1004	found=false
[69]	1005	grep "$remote_host_string" $config_file \| grep "%fopts" > tmp_mbuild
	1006	while read line1
[1]	1007	do
[116]	1008
[1]	1009	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	1010	then
	1011	line="$line1"
	1012	fi
[116]	1013
	1014	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	1015	then
	1016	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	1017	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	1018	found=true
	1019
	1020	# NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
	1021	compiler_options="$compiler_options $netcdf_inc"
	1022	fi
	1023
[69]	1024	done < tmp_mbuild
[116]	1025
	1026	if [[ $found = false ]]
[1]	1027	then
	1028	printf "\n +++ no compiler options found in configuration file"
	1029	printf "\n for \"$remote_host_string\" "
	1030	locat=config_file; exit
	1031	fi
[82]	1032
[1]	1033
	1034
	1035	# LADER-OPTIONEN ERMITTELN
	1036	line=""
[116]	1037	found=false
[69]	1038	grep "$remote_host_string" $config_file \| grep "%lopts" > tmp_mbuild
	1039	while read line1
[1]	1040	do
[116]	1041
[1]	1042	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	1043	then
	1044	line="$line1"
	1045	fi
[116]	1046
	1047	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	1048	then
	1049	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	1050	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	1051	found=true
	1052
	1053	# NETCDF-LIBRARY HINZUFUEGEN
	1054	loader_options="$loader_options $netcdf_lib"
	1055	fi
	1056
[69]	1057	done < tmp_mbuild
[1]	1058
[116]	1059	if [[ $found = false ]]
[1]	1060	then
	1061	printf "\n +++ no loader options found in configuration file"
	1062	printf "\n for \"$remote_host_string\" "
	1063	locat=config_file; exit
	1064	fi
[82]	1065
[1]	1066
	1067	printf "\n\n#------------------------------------------------------------------------# \n"
	1068	if [[ $remote_host = $local_host ]]
	1069	then
	1070	column1="remote_host:"; column2="$remote_host (= local host!)"
	1071	else
	1072	column1="remote_host:"; column2=$remote_host
	1073	fi
	1074	printf "\| $column1$column2 \| \n"
	1075	printf "\| \| \n"
	1076	column1="conditions:"; column2="$condition1 $condition2"
	1077	printf "\| $column1$column2 \| \n"
	1078	column1="make depository:"; column2=$remote_md
	1079	printf "\| $column1$column2 \| \n"
[25]	1080	if [[ $compile_utility_programs = true ]]
	1081	then
	1082	column1="utility directory:"; column2=$remote_ud
	1083	printf "\| $column1$column2 \| \n"
	1084	fi
[1]	1085	column1="username:"; column2=$remote_username
	1086	printf "\| $column1$column2 \| \n"
	1087	column1="addres:"; column2=$remote_addres
	1088	printf "\| $column1$column2 \| \n"
	1089	column1="compiler:"; column2=$compiler_name
	1090	printf "\| $column1$column2 \| \n"
[28]	1091	if [[ $compile_utility_programs = true ]]
	1092	then
	1093	column1="serial compiler:"; column2=$compiler_name_ser
	1094	printf "\| $column1$column2 \| \n"
	1095	fi
[1]	1096	column1="cpp options:"; column2=$cpp_options
	1097	printf "\| $column1$column2 \| \n"
	1098	line=$(echo "$cpp_options" \| cut -c51-)
	1099	while [[ "$line" != "" ]]
	1100	do
	1101	column1=""
	1102	column2=$line
	1103	printf "\| $column1$column2 \| \n"
	1104	line=$(echo "$line" \| cut -c51-)
	1105	done
	1106	column1="compiler options:"; column2=$compiler_options
	1107	printf "\| $column1$column2 \| \n"
	1108	line=$(echo "$compiler_options" \| cut -c51-)
	1109	while [[ "$line" != "" ]]
	1110	do
	1111	column1=""
	1112	column2=$line
	1113	printf "\| $column1$column2 \| \n"
	1114	line=$(echo "$line" \| cut -c51-)
	1115	done
	1116	column1="loader options:"; column2=$loader_options
	1117	printf "\| $column1$column2 \| \n"
	1118	line=$(echo "$loader_options" \| cut -c51-)
	1119	while [[ "$line" != "" ]]
	1120	do
	1121	column1=""
	1122	column2=$line
	1123	printf "\| $column1$column2 \| \n"
	1124	line=$(echo "$line" \| cut -c51-)
	1125	done
	1126	printf "#------------------------------------------------------------------------# \n"
	1127
	1128	if [[ $silent = false ]]
	1129	then
	1130	answer=dummy
	1131	printf "\n\n"
	1132	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
	1133	do
	1134	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
	1135	read answer
	1136	done
	1137	if [[ $answer = a \|\| $answer = A ]]
	1138	then
	1139	locat=user_abort; exit
	1140	fi
	1141	if [[ $answer = c \|\| $answer = C ]]
	1142	then
	1143	silent=false
	1144	fi
	1145	if [[ $answer = s \|\| $answer = S ]]
	1146	then
	1147	continue
	1148	fi
	1149	fi
	1150
	1151
	1152	if [[ $remote_mode = batch ]]
	1153	then
	1154
	1155	# BATCH-JOB PARAMETER SETZEN
	1156	case $remote_host in
	1157	(t3eb) queue=berte; memory=60; cputime=1000; xoption="-X 0";;
	1158	(t3eh) queue=comp_t3e; memory=60; cputime=360;;
	1159	(t3ej2) queue=normal; memory=60; cputime=1000; xoption="-X 0";;
[5]	1160	(t3ej5\|ground.yonsei.ac.kr) printf "\n --- remote host \"$remote_host\" does not allow batch jobs"; continue;;
[1]	1161	esac
	1162
	1163
	1164	# BATCH-JOB ZUSAMMENSTELLEN
	1165	printf "\n *** creating batch-job for remote host"
	1166	echo " " > mbuild_job
	1167
	1168	# AUF CRAY-RECHNERN IN JUELICH WIRD KEIN BENUTZER-PROFILE AUSGEFUEHRT
	1169	# DIES WIRD HIER GETAN, UM PFADE USW. ZU SETZEN
	1170	if [[ $remote_host = t3ej2 ]]
	1171	then
	1172	echo "set +vx" >> mbuild_job
	1173	echo ". .profile" >> mbuild_job
	1174	echo "set -x" >> mbuild_job
	1175	fi
	1176
	1177	# AUF CRAY-RECHNERN GELADENE MODULE AUFLISTEN
	1178	if [[ $host = t3eb \|\| $host = t3eh \|\| $host = t3ej2 ]]
	1179	then
	1180	echo "module list" >> mbuild_job
	1181	fi
	1182
	1183
	1184	# WECHSEL IN TEMPORAERES VERZEICHNIS
	1185	echo "cd ${remote_md}" >> mbuild_job
	1186
	1187
	1188	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	1189	echo "scp ${local_username}@${local_addres}:~/modell/code_3dp/palm_current_version/${mainprog}_sources.tar ${mainprog}_sources.tar" >> mbuild_job
	1190	# echo "[[ \$? != 0 ]] && (echo "+++ scp failed"; exit)" >> mbuild_job
	1191
	1192
	1193	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
	1194	echo "[[ -f ${mainprog}_current_version.tar ]] && tar -xvf ${mainprog}_current_version.tar" >> mbuild_job
	1195
	1196
	1197	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
	1198	echo "tar -xvf ${mainprog}_sources.tar" >> mbuild_job
	1199
	1200
	1201	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1202	echo "make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " >> mbuild_job
	1203	echo "chmod u+w *" >> mbuild_job
	1204
	1205	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
	1206	echo "tar -cvf ${mainprog}_current_version.tar .f90 .o" >> mbuild_job
	1207
	1208
	1209	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
	1210	echo "make clean" >> mbuild_job
	1211	echo "rm ${mainprog}_sources.tar" >> mbuild_job
	1212	echo "rm *.f90 Makefile" >> mbuild_job
	1213
	1214
	1215
	1216	# JOB MITTELS SUBJOB STARTEN
	1217	printf "\n *** sending batch job to remote host"
	1218	# subjob $xoption -h $remote_host -q $queue -m $memory -t $cputime -v mbuild_job
	1219
	1220
	1221	# JOBFILE LOESCHEN
	1222	# rm aljob
	1223
	1224	else
	1225
	1226	if [[ $remote_host != $local_host ]]
	1227	then
	1228
[40]	1229	if [[ $compile_utility_programs = false ]]
[1]	1230	then
	1231
[40]	1232	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	1233	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
	1234	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
	1235	if [[ $remote_host != lctit ]]
	1236	then
	1237	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
	1238	else
[206]	1239	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
[40]	1240	# MIT SSH, DESHALB AUFRUF PER PIPE
	1241	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
	1242	fi
	1243	if [[ $local_host = decalpha ]]
	1244	then
[206]	1245	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
[40]	1246	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1247	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1248	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
	1249	/bin/scp ${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
	1250	else
	1251	scp ${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
	1252	fi
[1]	1253
	1254
	1255
[40]	1256	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
	1257	echo " *** untar previous update on remote host, if existing"
	1258	if [[ $remote_host != lctit ]]
	1259	then
	1260	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
	1261	else
[206]	1262	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
[40]	1263	# MIT SSH, DESHALB AUFRUF PER PIPE
	1264	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
	1265	fi
[1]	1266
	1267
[40]	1268	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
	1269	echo " *** untar actual sources on remote host"
	1270	if [[ $remote_host != lctit ]]
	1271	then
	1272	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
	1273	else
[206]	1274	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
[40]	1275	# MIT SSH, DESHALB AUFRUF PER PIPE
	1276	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
	1277	fi
[1]	1278
	1279
[40]	1280	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1281	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
	1282	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
	1283	# Z.B. DIE PFADE ZUM COMPILER)
	1284	echo " *** execute \"make\" on remote host"
[1]	1285
[40]	1286	if [[ $remote_host = nech ]]
	1287	then
	1288	make_call_string="sxmake PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1289	else
	1290	make_call_string="make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1291	fi
	1292
	1293	if [[ $remote_host = t3eh ]]
	1294	then
[1]	1295
[40]	1296	print "xterm\nexit\n cd ${remote_md}; make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1297
[40]	1298	elif [[ $remote_host = t3ej2 \|\| $remote_host = ibms \|\| $remote_host = ibmy ]]
	1299	then
[1]	1300
[40]	1301	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1302
[40]	1303	elif [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
	1304	then
[1]	1305
[40]	1306	print "export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1307
[181]	1308	elif [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
	1309	then
	1310
[210]	1311	print ". /usr/share/modules/init/bash; module load mpt/1.21; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[196]	1312	# print ". /usr/share/modules/init/bash; module load mvapich2/1.2rc1-intel; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1313	# print ". /usr/share/modules/init/bash; module load mvapich2; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[181]	1314
[40]	1315	elif [[ $remote_host = lctit ]]
	1316	then
[1]	1317
[40]	1318	echo " " > ${remote_host}_last_make_protokoll
	1319	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
	1320	do
	1321	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1322	done
[1]	1323
[206]	1324	elif [[ $remote_host = lcxt4 ]]
	1325	then
	1326
	1327	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1328
[40]	1329	else
[1]	1330
[40]	1331	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1332
[40]	1333	fi
[1]	1334
[40]	1335	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
[1]	1336	then
[40]	1337	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
	1338	if [[ $silent = false ]]
	1339	then
	1340	answer=dummy
	1341	printf "\n"
	1342	while [[ "$answer" != c && "$answer" != k ]]
	1343	do
	1344	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
	1345	read answer
	1346	if [[ "$answer" = l ]]
	1347	then
	1348	more ${remote_host}_last_make_protokoll
	1349	fi
	1350	done
	1351	if [[ $answer = k ]]
[1]	1352	then
[40]	1353	locat=user_abort; exit
[1]	1354	fi
	1355	fi
	1356	fi
	1357
	1358
	1359
[40]	1360	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
	1361	printf "\n *** tar update on remote host ..."
	1362	if [[ $remote_host != lctit ]]
	1363	then
[181]	1364	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod"
[40]	1365	else
[206]	1366	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
[40]	1367	# MIT SSH, DESHALB AUFRUF PER PIPE
[181]	1368	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
[40]	1369	fi
[1]	1370
	1371
[40]	1372	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
	1373	# printf "\n *** \"make clean\" on remote host ..."
	1374	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
	1375	# printf "\n"
[1]	1376
	1377
[25]	1378
	1379
[22]	1380	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
	1381	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	1382	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
[40]	1383	elif [[ $compile_utility_programs = true ]]
[22]	1384	then
	1385
[24]	1386	printf "\n\n"
[27]	1387	echo " *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
	1388	cd ${local_source_path}/../SCRIPTS
[22]	1389
	1390	if [[ $remote_host != lctit ]]
	1391	then
[24]	1392	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
[22]	1393	else
[206]	1394	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
[22]	1395	# MIT SSH, DESHALB AUFRUF PER PIPE
[24]	1396	print "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_addres} 2>&1
[22]	1397	fi
	1398
[27]	1399	# KOPIEREN DER SCRIPTE
[22]	1400	if [[ $local_host = decalpha ]]
	1401	then
[206]	1402	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
[22]	1403	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1404	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1405	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
[27]	1406	/bin/scp batch_scp mbuild mrun subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
	1407	else
[28]	1408	scp batch_scp mbuild mrun subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
[27]	1409	fi
	1410
	1411	cd - > /dev/null
	1412	cd ${local_source_path}/../UTIL
	1413
	1414
	1415	# KOPIEREN DER UTILITY-PROGRAMME
	1416	if [[ $local_host = decalpha ]]
	1417	then
[206]	1418	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTï¿œNDIGEN PFADES
[27]	1419	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1420	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1421	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
[24]	1422	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
[22]	1423	else
[24]	1424	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
[22]	1425	fi
	1426
	1427
	1428
	1429	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1430	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
	1431	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
	1432	# Z.B. DIE PFADE ZUM COMPILER)
	1433	echo " *** execute \"make\" on remote host"
	1434
	1435	if [[ $remote_host = nech ]]
	1436	then
[27]	1437	make_call_string="sxmake F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
[22]	1438	else
[27]	1439	make_call_string="make F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
[22]	1440	fi
	1441
	1442	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
	1443	then
	1444
[25]	1445	ssh ${remote_username}@${remote_addres} "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
[22]	1446
	1447	elif [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
	1448	then
	1449
[25]	1450	print "export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres}
[22]	1451
	1452	elif [[ $remote_host = lctit ]]
	1453	then
	1454
	1455	echo " " > ${remote_host}_last_make_protokoll
	1456	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
	1457	do
	1458	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1459	done
	1460
	1461	else
	1462
	1463	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1464
	1465	fi
	1466
	1467	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
	1468
[75]	1469	rm -rf ${remote_host}_last_make_protokoll
[22]	1470
[1]	1471	# NUR AUF EINEM HLRN-RECHNER UEBERSETZEN
	1472	[[ $remote_host = ibmb \|\| $remote_host = ibmh ]] && ibm_hb_done=true
	1473
	1474	else
	1475
[40]	1476	if [[ $compile_utility_programs = false ]]
	1477	then
[1]	1478
[40]	1479	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
	1480	echo " "
	1481	echo " *** execute \"make\" on local host"
[1]	1482
[40]	1483	make PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
	1484
	1485	if [[ $? != 0 ]]
[1]	1486	then
[40]	1487	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
	1488	if [[ $silent = false ]]
	1489	then
	1490	answer=dummy
	1491	printf "\n"
	1492	while [[ "$answer" != c && "$answer" != k ]]
	1493	do
	1494	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
	1495	read answer
	1496	if [[ "$answer" = l ]]
	1497	then
	1498	more ${remote_host}_last_make_protokoll
	1499	fi
	1500	done
	1501	if [[ $answer = k ]]
[1]	1502	then
[40]	1503	locat=user_abort; exit
[1]	1504	fi
	1505	fi
	1506	fi
	1507
	1508
[40]	1509	# NEUE VERSION AUF LOKALEM RECHNER ZUSAMMENPACKEN
	1510	printf "\n *** tar update on local host ..."
	1511	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
[1]	1512
[22]	1513
	1514	# COMPILE THE UTILITY PROGRAMS
[40]	1515	elif [[ $compile_utility_programs = true ]]
[22]	1516	then
	1517	printf "\n\n"
	1518	echo " *** compiling the utility programs ..."
	1519	cd ${local_source_path}/../UTIL
[35]	1520	make F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
[22]	1521	cd - > /dev/null
	1522	fi
	1523
	1524
[1]	1525	# NUR EINMAL AUF LCMUK UEBERSETZEN
	1526	[[ $remote_host = lcmuk ]] && lcmuk_done=true
	1527
	1528	fi
	1529
	1530	fi
	1531	done
	1532
	1533
	1534	if [[ $host_found = false ]]
	1535	then
	1536	if [[ $host = all ]]
	1537	then
	1538	printf "\n +++ no hosts found in configuration file"
	1539	else
	1540	printf "\n +++ host \"$host\" not found in configuration file"
	1541	fi
	1542	locat=config_file; exit
	1543	fi
	1544
	1545
	1546
	1547	# ABSCHLIESSENDE ARBEITEN
	1548	rm -f hosts_found_in_config_file
	1549

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |