Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 181

Last change on this file since 181 was 181, checked in by raasch, 16 years ago
bugfixes + adjustments for SGI ICE system
Property svn:keywords set to `Id`
File size: 54.8 KB

Rev	Line
[1]	1	#!/bin/ksh
[66]	2	# mbuild - Programmuebersetzungsscript
[169]	3	# $Id: mbuild 181 2008-07-30 07:07:47Z raasch $
[1]	4
	5	# Prozedur zur Uebersetzung von Programmteilen mittels make-Mechanismus
	6	# auf einem Remote-Rechner, ausgehend von Quellcode auf einem lokalen
	7	# Rechner
	8
	9	# Folgende Probleme existieren unter Linux, wenn keine AT&T-Korn-Shell
	10	# verwendet wird:
	11	# Wertzuweisungen an Variablen innerhalb von DO-Schleifen werden nicht
	12	# nach aussen weitergegeben. "while read line" funktioniert nicht
	13	# innerhalb einer Pipe.
	14
	15	# letzte Aenderung:
	16	# 06/05/02 - Siggi - Beginn der Entwicklung
	17	# 12/06/02 - Siggi - Abschluss der Entwicklungsarbeiten
	18	# 23/06/02 - Siggi - voerst kein make-clean, Abbruch bei batch-mode
	19	# 24/07/02 - Siggi - Keine Verwendung der temporaeren Datei tmp_mbuild
	20	# unter linux mehr noetig, da nun AT&T-Korn-Shell
	21	# benutzt wird
	22	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) validiert
	23	# 19/12/02 - Siggi - ibmb validiert
	24	# 05/02/03 - Siggi - hostname nobela included
	25	# 04/03/03 - Siggi - host nech included
	26	# 06/03/03 - Siggi - make_call_string is echoed without '' to
	27	# file LAST_MAKE_CALL (otherwise error on NEC, because
	28	# '' are part of compiler options
	29	# 16/03/03 - Siggi - Two underscores are placed in front of every define
	30	# string, in case that palm.f90 version contains
	31	# such strings
	32	# 16/04/03 - Siggi - First extensions for linux machines
	33	# 24/06/03 - Siggi - host orkan included
	34	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
	35	# 24/07/03 - Siggi - host maestro admitted
	36	# 06/08/03 - Siggi - host gregale admitted
	37	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
	38	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
	39	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
	40	# (-D$OMP=OMP) in order to avoid problems with
	41	# OMP_NUM_THREADS
	42	# 09/01/04 - Siggi - action above cancelled
	43	# 28/01/04 - Siggi - action above re-cancelled
	44	# 08/03/04 - Siggi - host scirocco admitted
	45	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
	46	# the respective .f90 file is not listed in the makefile
	47	# and deletion is demanded by the user
	48	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
	49	# due to error in ssh installation (otherwise a prompt
	50	# for the password appears)
	51	# 23/07/04 - Siggi - changes due to the new berni configuration
	52	# (federation switch)
	53	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
	54	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
	55	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
	56	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
	57	# 24/04/05 - Siggi - netcdf support on lcmuk
	58	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
	59	# 12/05/05 - Siggi - netcdf support on ibm
	60	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
	61	# 18/05/05 - Siggi - netcdf support on nec
	62	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
	63	# 23/05/05 - Siggi - netcdf support on ibms
	64	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
	65	# 30/06/05 - Siggi - netcdf support on bora
	66	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
	67	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
	68	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
	69	# host gfdl5 (ibmy) admitted
	70	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
	71	# 20/01/06 - Siggi - cpp directive for ibmy
	72	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
	73	# 10/02/06 - Siggi - modifications for scp on decalpha
	74	# 13/04/06 - Siggi - ostria admitted
	75	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
	76	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
	77	# 29/05/05 - Siggi - atmos (lcide) admitted
	78	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
	79	# 24/11/06 - Siggi - breva and levanto admitted
	80	# 07/02/07 - Siggi - adapted for RIAM (neck)
[5]	81	# 10/02/07 - Siggi - all hpmuk-related code removed
[40]	82	# 02/03/07 - Siggi - compilation of utility programs and transfer of
[27]	83	# scripts to remote hosts added (option -u)
[66]	84	# 14/03/07 - Siggi - fimm admitted, revision number added to terminal
	85	# output
[69]	86	# 16/03/07 - Siggi - adjustments (netcdf) for lctit
	87	# adjustments for running under pdksh, local ip-addres
	88	# is not determined any more
[82]	89	# 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
	90	# from configuration file
	91	# host identifier (local_host) is read from config file
[116]	92	# 10/10/07 - Siggi - bugfix: handling of comment lines
[181]	93	# 18/07/08 - Siggi - adapted for lcsgih
	94	# 21/07/08 - Siggi - mainprog (executable) is added to the tar-file
	95	# ({mainprog}_current_version)
[1]	96
	97
	98
	99	# VARIABLENVEREINBARUNGEN + DEFAULTWERTE
[22]	100	compile_utility_programs=false
[1]	101	config_file=.mrun.config
[67]	102	fimm=false
[1]	103	host=all
	104	host_found=false
	105	ibm_hb_done=false
	106	lcmuk_done=false
	107	locat=normal
	108	makefile=""
	109	remote_mode=interactive
	110	scirocco=false
	111	silent=false
	112	suf=f90
	113	update=false
[83]	114	working_directory=`pwd`
[1]	115
	116	typeset -i ih ihost=0
	117
[66]	118	typeset -R30 calltime
[1]	119	typeset -L20 column1
	120	typeset -L50 column2
	121	typeset -L70 column3
[169]	122	typeset -L40 version="MBUILD 2.0 Rev$Rev: 116 $"
[1]	123
	124	# FEHLERBEHANDLUNG
	125	# BEI EXIT:
[83]	126	trap 'rm -rf $working_directory/tmp_mbuild
[69]	127	if [[ $locat != normal ]]
[1]	128	then
	129	printf "\n\n +++ mbuild killed \n\n"
	130	else
	131	printf "\n\n *** mbuild finished \n\n"
	132	fi' exit
	133
	134
	135	# BEI TERMINAL-BREAK:
[83]	136	trap 'rm -rf $working_directory/tmp_mbuild
[69]	137	printf "\n\n +++ mbuild killed by \"^C\" \n\n"
[1]	138	exit
	139	' 2
	140
	141
	142
	143	# SHELLSCRIPT-OPTIONEN EINLESEN
[22]	144	while getopts :c:h:m:rs:u option
[1]	145	do
	146	case $option in
	147	(c) config_file=$OPTARG;;
	148	(h) host=$OPTARG;;
	149	(m) makefile=$OPTARG;;
	150	(r) remote_mode=batch;;
	151	(s) suf=$OPTARG;;
[22]	152	(u) compile_utility_programs=true;;
[1]	153	(\?) printf "\n +++ unknown option $OPTARG \n";
	154	locat=parameter; exit;;
	155	esac
	156	done
	157
	158
	159
	160	# BATCH-MODE IST ZUR ZEIT NICHT FUNKTIONSFAEHIG
	161	if [[ $remote_mode = batch ]]
	162	then
	163	printf "\n +++ sorry, batch mode does not work! \n"
	164	locat=parameter; exit
	165	fi
	166
	167
	168
[82]	169	# PRUEFEN, OB KONFIGURATIONS-DATEI VORHANDEN
	170	if [[ ! -f $config_file ]]
	171	then
	172	printf "\n +++ configuration file: "
	173	printf "\n $config_file"
	174	printf "\n does not exist"
	175	locat=configuration; exit
	176	fi
	177
	178
	179
[1]	180	# LOKALEN RECHNER ERMITTELN
	181	local_host_real_name=$(hostname)
[69]	182	# local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
	183
[1]	184
[82]	185
	186	# HOST-IDENTIFIER (local_host) AUS KONFIGURATIONSDATEI BESTIMMEN
	187	line=""
	188	grep "%host_identifier" $config_file > tmp_mbuild
	189	while read line
	190	do
[116]	191	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
[82]	192	then
	193	HOSTNAME=`echo $line \| cut -d" " -s -f2`
	194	host_identifier=`echo $line \| cut -d" " -s -f3`
[83]	195	if [[ $local_host_real_name = $HOSTNAME ]]
[82]	196	then
	197	local_host=$host_identifier
	198	break
	199	fi
	200	fi
	201	done < tmp_mbuild
	202
	203	if [[ "$local_host" = "" ]]
	204	then
	205	printf "\n +++ no host identifier found in configuration file \"$config_file\""
	206	printf "\n for local host \"$local_host_real_name\"."
	207	printf "\n Please add line"
	208	printf "\n \"\%host_identifier $local_host_real_name <identifier>\""
	209	printf "\n to the configuration file."
	210	locat=local_host; exit
	211	fi
	212
	213
	214
[1]	215	[[ $local_host_real_name = scirocco ]] && scirocco=true
[67]	216	[[ $local_host_real_name = fimm.bccs.uib.no ]] && fimm=true
[1]	217
	218
	219
	220	if [[ $local_host != ibms ]]
	221	then
	222	config_file=$PWD/$config_file
	223	else
	224	config_file=`pwd`/$config_file
	225	fi
	226
	227
	228
	229	# BENUTZERNAMEN AUF LOKALEM RECHNER AUS KONFIGURATIONSDATEI ERMITTELN
	230	line=""
[69]	231	grep " $local_host" $config_file \| grep "%remote_username" > tmp_mbuild
	232	while read line
[1]	233	do
[116]	234	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
[1]	235	then
	236	local_username=`echo $line \| cut -d" " -s -f2`
	237	fi
[69]	238	done < tmp_mbuild
[1]	239
[82]	240
[1]	241	if [[ "$local_username" = "" ]]
	242	then
	243	printf "\n +++ no user name found in configuration file"
	244	printf "\n for local host \"$local_host\" "
	245	locat=config_file; exit
	246	fi
	247
	248
[5]	249	# LOKALEN QUELLTEXTPFAD ERMITTELN.
	250	# ZUERST PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD FUER ALLE RECHNER
	251	# VEREINBART WURDE.
	252	# DAZU ZUNAECHST ALLE IN DER KONFIGURATIONSDATEI VEREINBARTEN GLOBALEN
	253	# VARIABLEN SETZEN, WEIL DIESE EVTL. IN PFADNAMEN VERWENDET WERDEN
	254	line=""
[69]	255	grep "%" $config_file > tmp_mbuild
	256	while read line
[5]	257	do
[116]	258	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" && $(echo $line \| cut -c1) != "#" ]]
[1]	259	then
[5]	260	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
	261	value=`echo $line \| cut -d" " -s -f2`
[8]	262	eval export $var=\$value
[9]	263	# eval echo \" $var=\$$var \" # AUSGABE ZU TESTZWECKEN
[1]	264	fi
[69]	265	done < tmp_mbuild
[1]	266
[5]	267	# NUN PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD VEREINBART WURDE
[1]	268	line=""
[69]	269	grep "%source_path" $config_file > tmp_mbuild
	270	while read line
[1]	271	do
	272	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	273	then
	274	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
	275	then
	276	global_source_path=`echo $line \| cut -d" " -s -f2`
	277	fi
	278	fi
[69]	279	done < tmp_mbuild
[1]	280
	281	line=""
[69]	282	grep " $local_host" $config_file \| grep "%source_path" > tmp_mbuild
	283	while read line
[1]	284	do
	285	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	286	then
	287	local_source_path=`echo $line \| cut -d" " -s -f2`
	288	fi
[69]	289	done < tmp_mbuild
[1]	290
	291	if [[ "$local_source_path" = "" ]]
	292	then
	293	if [[ "$global_source_path" != "" ]]
	294	then
	295	local_source_path=$global_source_path
	296	else
	297	printf "\n +++ no source path found in configuration file"
	298	printf "\n for local host \"$local_host\" "
	299	printf "\n please set \"\%source_path\" in configuration file"
	300	locat=config_file; exit
	301	fi
	302	fi
	303	eval local_source_path=$local_source_path
[8]	304	eval local_source_path=$local_source_path
[1]	305
	306
	307	# EBENSO PFAD FUER DAS MAKE-DEPOSITORY ERMITTELN
	308	line=""
[69]	309	grep "%depository_path" $config_file > tmp_mbuild
	310	while read line
[1]	311	do
	312	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	313	then
	314	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
	315	then
	316	global_depository_path=`echo $line \| cut -d" " -s -f2`
	317	fi
	318	fi
[69]	319	done < tmp_mbuild
[1]	320
	321	line=""
[69]	322	grep " $local_host" $config_file \| grep "%depository_path" > tmp_mbuild
	323	while read line
[1]	324	do
	325	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	326	then
	327	local_depository_path=`echo $line \| cut -d" " -s -f2`
	328	fi
[69]	329	done < tmp_mbuild
[1]	330
	331	if [[ "$local_depository_path" = "" ]]
	332	then
	333	if [[ "$global_depository_path" != "" ]]
	334	then
	335	local_depository_path=$global_depository_path
	336	else
	337	printf "\n +++ no depository path found in configuration file"
	338	printf "\n for local host \"$local_host\" "
	339	printf "\n please set \"\%depository_path\" in configuration file"
	340	locat=config_file; exit
	341	fi
	342	fi
	343	eval local_depository_path=$local_depository_path
[8]	344	eval local_depository_path=$local_depository_path
[1]	345
	346
	347
[5]	348	# PRUEFEN, OB IN KONFIGURATIONSDATEI EIN HAUPTPROGRAMM
	349	# VEREINBART WURDE
	350	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
	351	then
	352	printf "\n +++ no main program or more than one main program defined"
	353	printf "\n in configuration file"
	354	locat=configuration; exit
	355	else
	356	line=`grep "%mainprog" $config_file`
	357	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
	358	then
	359	printf "\n +++ no main program defined in configuration file"
	360	locat=configuration; exit
	361	fi
	362	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
	363	fi
	364
	365
	366
[1]	367	# MAKEFILE vorhanden
	368	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
	369	if [[ ! -f $makefile ]]
	370	then
	371	printf "\n +++ makefile: "
	372	printf "\n $makefile"
	373	printf "\n does not exist"
	374	locat=makefile; exit
	375	fi
	376
	377
	378	# HEADER-AUSGABE (TEIL1: MELDUNGEN UEBER LOKALEN RECHNER)
	379	calltime=$(date)
	380	printf "\n"
	381	printf "#------------------------------------------------------------------------# \n"
	382	printf "\| $version$calltime \| \n"
	383	printf "\| \| \n"
	384	column1="called on:"; column2=$local_host_real_name
	385	printf "\| $column1$column2 \| \n"
	386	column1="local username:"; column2=$local_username
	387	printf "\| $column1$column2 \| \n"
	388	column1="local IP-addres:"; column2=$local_addres
	389	printf "\| $column1$column2 \| \n"
	390	column1="config file:"; column2=$config_file
	391	printf "\| $column1$column2 \| \n"
	392	column1="makefile:"; column2=$makefile
	393	printf "\| $column1$column2 \| \n"
	394	column1="local source path:"; column2=$local_source_path
	395	printf "\| $column1$column2 \| \n"
	396	column1="make depository:"; column2=$local_depository_path
	397	printf "\| $column1$column2 \| \n"
	398	printf "#------------------------------------------------------------------------# \n"
	399
	400	# printf "\| \| \n"
	401
	402
[40]	403	if [[ $compile_utility_programs = false ]]
	404	then
[1]	405
[40]	406	cd $local_source_path
[1]	407
	408
[40]	409	# LISTE DER ZU PRUEFENDEN QUELLTEXTDATEIEN ERSTELLEN
	410	source_code_files=`ls -1 *.$suf`
[1]	411
	412
[40]	413
	414	# VERZEICHNIS FUER DAS MAKE-DEPOSITORY ERZEUGEN,
	415	# FALLS NOCH NICHT VORHANDEN. ANSONSTEN ALLE DATEIEN
	416	# NEUEREN DATUMS IN DIESES VERZEICHNIS KOPIEREN
	417	if [[ ! -d $local_depository_path ]]
[1]	418	then
[40]	419	if mkdir $local_depository_path
	420	then
	421	printf "\n\n *** directory for make depository:"
	422	printf "\n $local_depository_path"
	423	printf "\n was created\n"
[1]	424
[40]	425	# MAKEFILE UND QUELLTEXTDATEIEN UNTER BEIBEHALTUNG
	426	# IHRES DATUMS INS VERZEICHNIS KOPIEREN
	427	printf "\n *** makefile and source code files are copied to"
	428	printf "\n $local_depository_path\n"
	429	printf "\n copying makefile \"$makefile\" ..."
	430	cp -p $makefile $local_depository_path/Makefile
[1]	431
[40]	432	# QUELLTEXTDATEIEN MUESSEN IM MAKEFILE AUFGEFUEHRT
	433	# SEIN
	434	for filename in $source_code_files
	435	do
	436	if [[ $(grep -c $filename $makefile) = 0 ]]
	437	then
	438	printf "\n +++ source code file:"
	439	printf "\n $filename"
	440	printf "\n is not listed in makefile"
	441	locat=makefile; exit
	442	else
	443	printf "\n copying source code file \"$filename\" ..."
	444	cp -p $filename $local_depository_path
	445	fi
	446	done
	447	printf "\n"
	448	else
	449	printf "\n +++ directory for make depository:"
	450	printf "\n $local_depository_path"
	451	printf "\n cannot be created"
	452	locat=local_depository_path; exit
	453	fi
	454	else
	455
	456	printf "\n *** checking file status ..."
	457
	458	# MAKEFILE KOPIEREN, FALLS NEUEREN DATUMS
	459	if [[ $makefile -nt $local_depository_path/Makefile ]]
	460	then
	461	printf "\n *** update of \"$makefile\" "
	462	cp -f -p $makefile $local_depository_path/Makefile
	463	update=true
	464
	465	# PRUEFEN, OB ALLE DATEIEN IM DEPOSITORY AUCH IM NEUEN MAKEFILE
	466	# VERZEICHNET SIND UND GEGEBENENFALLS DATEIEN LOESCHEN
	467	cd $local_depository_path
	468	source_code_files_in_depository=`ls -1 *.$suf`
	469	for filename in $source_code_files_in_depository
	470	do
	471	if [[ $(grep -c $filename Makefile) = 0 ]]
	472	then
	473	printf "\n *** source code file in \"$local_depository_path\":"
	474	printf "\n $filename"
	475	printf "\n is not listed in makefile"
	476	if [[ $silent = false ]]
	477	then
	478	answer=dummy
	479	printf "\n\n"
	480	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
	481	do
	482	printf " >>> delete \"$filename\" in \"$local_depository_path\" (y/n) ? "
	483	read answer
	484	done
	485	if [[ $answer = y \|\| $answer = Y ]]
	486	then
	487	base=`echo $filename \| cut -d. -f2`
	488	rm -f $filename
	489	rm -f ${base}.o ${base}.mod
	490	printf "\n *** \"$filename\" deleted in \"$local_depository_path\" "
	491	else
	492	printf "\n *** \"$filename\" not deleted in \"$local_depository_path\" "
	493	fi
	494	fi
	495	fi
	496	done
	497	cd - > /dev/null 2>&1
	498
	499	elif [[ $local_depository_path/Makefile -nt $makefile ]]
	500	then
	501	printf "\n *** makefile in depository is newer than"
	502	printf "\n \"$makefile\" "
	503	if [[ $silent = false ]]
	504	then
	505	answer=dummy
	506	printf "\n\n"
	507	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
	508	do
	509	printf " >>> update \"$makefile\" (y/n) ? "
	510	read answer
	511	done
	512	if [[ $answer = y \|\| $answer = Y ]]
	513	then
	514	cp -f -p $local_depository_path/Makefile $makefile
	515	printf "\n *** \"$makefile\" updated"
	516	else
	517	printf "\n *** \"$makefile\" not updated"
	518	fi
	519	fi
	520	fi
	521
	522	# QUELLTEXTDATEIEN KOPIEREN, FALLS NEUEREN DATUMS
	523	# SIE MUESSEN IM MAKEFILE AUFGEFUEHRT SEIN
[1]	524	for filename in $source_code_files
	525	do
	526	if [[ $(grep -c $filename $makefile) = 0 ]]
	527	then
	528	printf "\n +++ source code file:"
	529	printf "\n $filename"
	530	printf "\n is not listed in makefile"
	531	locat=makefile; exit
	532	else
[40]	533	if [[ ! -f $local_depository_path/$filename ]]
	534	then
	535	cp -p $filename $local_depository_path
	536	printf "\n *** source code file \"$filename\" created in \"$local_depository_path\" "
	537	fi
	538	if [[ $filename -nt $local_depository_path/$filename ]]
	539	then
	540	printf "\n *** update of source code file \"$filename\" "
	541	cp -f -p $filename $local_depository_path
	542	update=true
	543	fi
[1]	544	fi
	545	done
	546
	547
[40]	548	# PRUEFEN, OB ALLE DATEIEN IM DEPOSITORY IM AKTUELLEN ARBEITSVERZEICHNIS VORHANDEN
	549	# ODER EVTL. NEUEREN DATUMS SIND
[1]	550	cd $local_depository_path
	551	source_code_files_in_depository=`ls -1 *.$suf`
[40]	552	cd - > /dev/null 2>&1
[1]	553	for filename in $source_code_files_in_depository
	554	do
[40]	555	if [[ ! -f $filename ]]
[1]	556	then
[40]	557	printf "\n *** source code file \"$filename\" does not exist in current directory"
[1]	558	if [[ $silent = false ]]
	559	then
	560	answer=dummy
	561	printf "\n\n"
	562	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
	563	do
[40]	564	printf " >>> create \"$filename\" in current directory (y/n) ? "
[1]	565	read answer
	566	done
	567	if [[ $answer = y \|\| $answer = Y ]]
	568	then
[40]	569	cp -p $local_depository_path/$filename $filename
	570	printf "\n *** source code file \"$filename\" created in current directory"
[1]	571	else
[40]	572	printf "\n *** source code file \"$filename\" not created in current directory"
[1]	573	fi
	574	fi
[40]	575	elif [[ $local_depository_path/$filename -nt $filename ]]
[1]	576	then
[40]	577	ls -al $local_depository_path/$filename
	578	ls -al $filename
	579	printf "\n *** source code file \"$filename\" in depository is newer than in current directory"
	580	if [[ $silent = false ]]
[1]	581	then
[40]	582	answer=dummy
	583	printf "\n\n"
	584	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
	585	do
	586	printf " >>> update \"$filename\" in current directory (y/n) ? "
	587	read answer
	588	done
	589	if [[ $answer = y \|\| $answer = Y ]]
	590	then
	591	cp -f -p $local_depository_path/$filename $filename
	592	printf "\n *** source code file \"$filename\" updated in current directory"
	593	else
	594	printf "\n *** source code file \"$filename\" not updated in current directory"
	595	fi
[1]	596	fi
	597	fi
[40]	598	done
	599
	600	if [[ $update = false ]]
[1]	601	then
[40]	602	printf "\n *** no updates necessary in \"$local_depository_path\" "
[1]	603	if [[ $silent = false ]]
	604	then
	605	answer=dummy
	606	printf "\n\n"
	607	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
	608	do
[40]	609	printf " >>> continue with updates on remote hosts (y/n) ? "
[1]	610	read answer
	611	done
[40]	612	if [[ $answer = n \|\| $answer = N ]]
[1]	613	then
[40]	614	locat=user_abort; exit
[1]	615	fi
	616	fi
	617	fi
	618	fi
	619
	620
	621
[40]	622	# QUELLTEXTDATEIEN UND MAKEFILE MIT TAR ZUSAMMENBINDEN
	623	# IN JEDEM FALL ALLEN DATEIEN WRITE-PERMIT GEBEN, DAMIT ES AUF
	624	# DEN REMOTE-RECHNERN NICHT EVTL. ZU PROBLEMEN BEIM UEBERSCHREIBEN KOMMT
	625	printf "\n\n *** tar of makefile and source files in depository ..."
	626	cd $local_depository_path
	627	chmod u+w Makefile *.$suf
	628	tar -cf ${mainprog}_sources.tar Makefile *.$suf
	629	printf "\n"
[1]	630
[40]	631	fi
[1]	632
	633
[40]	634
[1]	635	# BESTAETIGUNG ZUM WEITERMACHEN EINHOLEN
	636	if [[ $host = all ]]
	637	then
	638	printf "\n *** updates will be made for ALL hosts found in"
	639	printf "\n the configuration file"
	640	else
	641	printf "\n *** update will be made for host \"$host\" "
	642	fi
	643
	644	if [[ $silent = false ]]
	645	then
	646	answer=dummy
	647	printf "\n\n"
	648	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
	649	do
	650	printf " >>> continue (y/n) ? "
	651	read answer
	652	done
	653	if [[ $answer = n \|\| $answer = N ]]
	654	then
	655	locat=user_abort; exit
	656	fi
	657	fi
	658
	659
	660
	661
	662	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
	663	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
	664	printf "\n *** scanning configuration file for host(s) ..."
	665
[69]	666	grep %fopts $config_file > tmp_mbuild
	667	while read line
[1]	668	do
	669	# KOMMENTARZEILEN UEBERSPRINGEN
	670	[[ $(echo $line \| cut -c1) = "#" ]] && continue
	671	(( ihost = ihost + 1 ))
	672	hostline[$ihost]="$line"
[69]	673	done < tmp_mbuild
[1]	674
	675
	676	while (( ih < ihost ))
	677	do
	678
	679	(( ih = ih + 1 ))
	680
	681	# REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
	682	# NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
	683	# SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
	684	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
	685	remote_host=`echo $remote_host_string \| cut -d" " -f1`
	686	if [[ $host != all ]]
	687	then
	688	[[ $remote_host != $host ]] && continue
	689	fi
	690	host_found=true
	691	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
	692	if [[ $condition1 = $remote_host ]]
	693	then
	694	condition1=""
	695	else
	696	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
	697	fi
	698
[82]	699	netcdf_inc=""
	700	netcdf_lib=""
[1]	701
	702	# AUF HLRN-RECHNER NUR EINMAL UEBERSETZEN
	703	if [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
	704	then
	705	if [[ $ibm_hb_done = true ]]
	706	then
	707	printf "\n *** remote host \"$remote_host\" skipped since compilation has already"
	708	printf "\n been carried out on one of the HLRN machines\n"
	709	continue
	710	fi
	711	fi
	712
	713	# AUF LCMUK-RECHNER NUR EINMAL UEBERSETZEN
	714	if [[ $remote_host = lcmuk ]]
	715	then
	716	if [[ $lcmuk_done = true ]]
	717	then
	718	printf "\n *** local host \"$remote_host\" skipped since compilation has already"
	719	printf "\n been carried out on this host\n"
	720	continue
	721	fi
	722	fi
	723
	724
	725	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
	726	case $remote_host in
[116]	727	(lcmuk) remote_addres=130.75.105.2;;
[181]	728	(lcsgib) remote_addres=130.73.232.102;;
	729	(lcsgih) remote_addres=130.75.4.102;;
[83]	730	(lctit) remote_addres=172.17.75.161;;
	731	(decalpha) remote_addres=165.132.26.56;;
	732	(ibmb) remote_addres=130.73.230.10;;
	733	(ibmh) remote_addres=130.75.4.10;;
	734	(ibms) remote_addres=150.183.5.101;;
	735	(ibmy) remote_addres=165.132.26.58;;
	736	(nech) remote_addres=136.172.44.192;;
	737	(neck) remote_addres=133.5.178.11;;
	738	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
	739	(*) if [[ $local_host != $remote_host ]]
[1]	740	then
[83]	741	printf "\n +++ remote host \"$remote_host\" unknown";
	742	printf "\n please inform S. Raasch!"
[1]	743	fi;;
	744	esac
	745
	746
	747	# REMOTE-USERNAMEN ERMITTELN
	748	line=""
[116]	749	found=false
[69]	750	grep "$remote_host_string" $config_file \| grep "%remote_username" > tmp_mbuild
	751	while read line1
[1]	752	do
[116]	753
[1]	754	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	755	then
	756	line="$line1"
	757	fi
[116]	758
	759	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	760	then
	761	remote_username=`echo $line \| cut -d" " -s -f2`
	762	found=true
	763	fi
	764
[69]	765	done < tmp_mbuild
[1]	766
[116]	767	if [[ $found = false ]]
[1]	768	then
	769	printf "\n +++ no remote username found in configuration file"
	770	printf "\n for \"$remote_host_string\" "
	771	locat=config_file; exit
	772	fi
	773
	774
	775	# REMOTE-QUELLTEXTPFAD ERMITTELN
	776	line=""
[54]	777	remote_source_path=""
[69]	778	grep "$remote_host_string" $config_file \| grep "%source_path" > tmp_mbuild
	779	while read line1
[1]	780	do
[116]	781
[1]	782	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	783	then
	784	line="$line1"
	785	fi
[116]	786
	787	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	788	then
	789	remote_source_path=`echo $line \| cut -d" " -s -f2`
	790	fi
	791
[69]	792	done < tmp_mbuild
[1]	793
	794	if [[ "$remote_source_path" = "" ]]
	795	then
	796	if [[ "$global_source_path" != "" ]]
	797	then
	798	remote_source_path=$global_source_path
	799	else
	800	printf "\n +++ no source path found in configuration file"
	801	printf "\n for \"$remote_host_string\" "
	802	locat=config_file; exit
	803	fi
	804	fi
	805
[22]	806	remote_ud=${remote_source_path}/../UTIL
[24]	807	remote_ud=$(eval echo $remote_ud)
[1]	808
[54]	809
[1]	810	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
[54]	811	remote_md=""
[1]	812	line=""
[69]	813	grep "$remote_host_string" $config_file \| grep "%depository_path" > tmp_mbuild
	814	while read line1
[1]	815	do
[116]	816
[1]	817	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	818	then
	819	line="$line1"
	820	fi
[116]	821
	822	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	823	then
	824	remote_md=`echo $line \| cut -d" " -s -f2`
	825	fi
	826
[69]	827	done < tmp_mbuild
[1]	828
	829	if [[ "$remote_md" = "" ]]
	830	then
	831	if [[ "$global_depository_path" != "" ]]
	832	then
	833	remote_md=$global_depository_path
	834	else
	835	printf "\n +++ no depository path found in configuration file"
	836	printf "\n for \"$remote_host_string\" "
	837	printf "\n please set \"\%depository_path\" in configuration file"
	838	locat=config_file; exit
	839	fi
	840	fi
	841
[8]	842	remote_md=$(eval echo $remote_md)
[1]	843
[8]	844
[1]	845	# COMPILERNAMEN ERMITTELN
	846	line=""
[116]	847	found=false
[69]	848	grep "$remote_host_string" $config_file \| grep "%compiler_name " > tmp_mbuild
	849	while read line1
[1]	850	do
[116]	851
[1]	852	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	853	then
	854	line="$line1"
	855	fi
[116]	856
	857	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	858	then
	859	compiler_name=`echo $line \| cut -d" " -s -f2`
	860	found=true
	861	fi
	862
[69]	863	done < tmp_mbuild
[1]	864
[116]	865	if [[ $found = false ]]
[1]	866	then
	867	printf "\n +++ no compiler name found in configuration file"
	868	printf "\n for \"$remote_host_string\" "
	869	locat=config_file; exit
	870	fi
	871
	872
[27]	873	# BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
	874	# SERIELLER COMPILERNAME ERMITTELT WERDEN
	875	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
	876	then
	877	line=""
[116]	878	found=false
[69]	879	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" > tmp_mbuild
	880	while read line1
[27]	881	do
[116]	882
[27]	883	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	884	then
	885	line="$line1"
	886	fi
[116]	887
	888	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	889	then
	890	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
	891	found=true
	892	fi
	893
[69]	894	done < tmp_mbuild
[1]	895
[116]	896	if [[ $found = false ]]
[27]	897	then
[28]	898	printf "\n +++ no serial compiler name found in configuration file"
[27]	899	printf "\n for \"$remote_host_string\" "
	900	locat=config_file; exit
	901	fi
	902	else
	903	compiler_name_ser=$compiler_name
	904	fi
	905
	906
	907
[82]	908	# PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
	909	line=""
[116]	910	found=false
[82]	911	grep "$remote_host_string" $config_file \| grep "%cpp_options" > tmp_mbuild
	912	while read line1
	913	do
[116]	914
[82]	915	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	916	then
	917	line="$line1"
	918	fi
[116]	919
	920	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	921	then
	922	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	923	cpp_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	924	found=true
	925	fi
	926
[82]	927	done < tmp_mbuild
[116]	928
	929	if [[ $found = false ]]
[82]	930	then
	931	printf "\n +++ no preprocessor options found in configuration file"
	932	printf "\n for \"$remote_host_string\" "
	933	locat=config_file; exit
	934	fi
	935
[116]	936
[82]	937	# RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
	938	for string in $remote_host_string
	939	do
	940	if [[ $(echo $remote_host \| cut -c1-2) = lc && $(echo $string \| cut -c1-2) = lc ]]
	941	then
	942	cpp_options="$cpp_options -D__lc "
[83]	943	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $(echo $string \| cut -c1-3) = ibm ]]
	944	then
	945	cpp_options="${cpp_options},-D__ibm"
	946	elif [[ $(echo $remote_host \| cut -c1-3) = nec && $(echo $string \| cut -c1-3) = nec ]]
	947	then
	948	cpp_options="${cpp_options} -D__nec"
[82]	949	else
[83]	950	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
	951	then
	952	cpp_options="${cpp_options},-D__$string"
	953	else
	954	cpp_options="$cpp_options -D__$string "
	955	fi
[82]	956	fi
	957	done
	958
	959
	960
	961	# NETCDF-OPTIONEN ERMITTELN
	962	line=""
	963	grep "$remote_host_string" $config_file \| grep "%netcdf_inc" > tmp_mbuild
	964	while read line1
	965	do
[116]	966
[82]	967	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	968	then
	969	line="$line1"
	970	fi
[116]	971
	972	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	973	then
	974	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	975	netcdf_inc=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	976	fi
	977
[82]	978	done < tmp_mbuild
	979
	980	line=""
	981	grep "$remote_host_string" $config_file \| grep "%netcdf_lib" > tmp_mbuild
	982	while read line1
	983	do
[116]	984
[82]	985	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	986	then
	987	line="$line1"
	988	fi
[116]	989
	990	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	991	then
	992	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	993	netcdf_lib=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	994	fi
	995
[82]	996	done < tmp_mbuild
	997
	998
	999
[1]	1000	# COMPILEROPTIONEN ERMITTELN
	1001	line=""
[116]	1002	found=false
[69]	1003	grep "$remote_host_string" $config_file \| grep "%fopts" > tmp_mbuild
	1004	while read line1
[1]	1005	do
[116]	1006
[1]	1007	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	1008	then
	1009	line="$line1"
	1010	fi
[116]	1011
	1012	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	1013	then
	1014	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	1015	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	1016	found=true
	1017
	1018	# NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
	1019	compiler_options="$compiler_options $netcdf_inc"
	1020	fi
	1021
[69]	1022	done < tmp_mbuild
[116]	1023
	1024	if [[ $found = false ]]
[1]	1025	then
	1026	printf "\n +++ no compiler options found in configuration file"
	1027	printf "\n for \"$remote_host_string\" "
	1028	locat=config_file; exit
	1029	fi
[82]	1030
[1]	1031
	1032
	1033	# LADER-OPTIONEN ERMITTELN
	1034	line=""
[116]	1035	found=false
[69]	1036	grep "$remote_host_string" $config_file \| grep "%lopts" > tmp_mbuild
	1037	while read line1
[1]	1038	do
[116]	1039
[1]	1040	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	1041	then
	1042	line="$line1"
	1043	fi
[116]	1044
	1045	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	1046	then
	1047	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	1048	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	1049	found=true
	1050
	1051	# NETCDF-LIBRARY HINZUFUEGEN
	1052	loader_options="$loader_options $netcdf_lib"
	1053	fi
	1054
[69]	1055	done < tmp_mbuild
[1]	1056
[116]	1057	if [[ $found = false ]]
[1]	1058	then
	1059	printf "\n +++ no loader options found in configuration file"
	1060	printf "\n for \"$remote_host_string\" "
	1061	locat=config_file; exit
	1062	fi
[82]	1063
[1]	1064
	1065	printf "\n\n#------------------------------------------------------------------------# \n"
	1066	if [[ $remote_host = $local_host ]]
	1067	then
	1068	column1="remote_host:"; column2="$remote_host (= local host!)"
	1069	else
	1070	column1="remote_host:"; column2=$remote_host
	1071	fi
	1072	printf "\| $column1$column2 \| \n"
	1073	printf "\| \| \n"
	1074	column1="conditions:"; column2="$condition1 $condition2"
	1075	printf "\| $column1$column2 \| \n"
	1076	column1="make depository:"; column2=$remote_md
	1077	printf "\| $column1$column2 \| \n"
[25]	1078	if [[ $compile_utility_programs = true ]]
	1079	then
	1080	column1="utility directory:"; column2=$remote_ud
	1081	printf "\| $column1$column2 \| \n"
	1082	fi
[1]	1083	column1="username:"; column2=$remote_username
	1084	printf "\| $column1$column2 \| \n"
	1085	column1="addres:"; column2=$remote_addres
	1086	printf "\| $column1$column2 \| \n"
	1087	column1="compiler:"; column2=$compiler_name
	1088	printf "\| $column1$column2 \| \n"
[28]	1089	if [[ $compile_utility_programs = true ]]
	1090	then
	1091	column1="serial compiler:"; column2=$compiler_name_ser
	1092	printf "\| $column1$column2 \| \n"
	1093	fi
[1]	1094	column1="cpp options:"; column2=$cpp_options
	1095	printf "\| $column1$column2 \| \n"
	1096	line=$(echo "$cpp_options" \| cut -c51-)
	1097	while [[ "$line" != "" ]]
	1098	do
	1099	column1=""
	1100	column2=$line
	1101	printf "\| $column1$column2 \| \n"
	1102	line=$(echo "$line" \| cut -c51-)
	1103	done
	1104	column1="compiler options:"; column2=$compiler_options
	1105	printf "\| $column1$column2 \| \n"
	1106	line=$(echo "$compiler_options" \| cut -c51-)
	1107	while [[ "$line" != "" ]]
	1108	do
	1109	column1=""
	1110	column2=$line
	1111	printf "\| $column1$column2 \| \n"
	1112	line=$(echo "$line" \| cut -c51-)
	1113	done
	1114	column1="loader options:"; column2=$loader_options
	1115	printf "\| $column1$column2 \| \n"
	1116	line=$(echo "$loader_options" \| cut -c51-)
	1117	while [[ "$line" != "" ]]
	1118	do
	1119	column1=""
	1120	column2=$line
	1121	printf "\| $column1$column2 \| \n"
	1122	line=$(echo "$line" \| cut -c51-)
	1123	done
	1124	printf "#------------------------------------------------------------------------# \n"
	1125
	1126	if [[ $silent = false ]]
	1127	then
	1128	answer=dummy
	1129	printf "\n\n"
	1130	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
	1131	do
	1132	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
	1133	read answer
	1134	done
	1135	if [[ $answer = a \|\| $answer = A ]]
	1136	then
	1137	locat=user_abort; exit
	1138	fi
	1139	if [[ $answer = c \|\| $answer = C ]]
	1140	then
	1141	silent=false
	1142	fi
	1143	if [[ $answer = s \|\| $answer = S ]]
	1144	then
	1145	continue
	1146	fi
	1147	fi
	1148
	1149
	1150	if [[ $remote_mode = batch ]]
	1151	then
	1152
	1153	# BATCH-JOB PARAMETER SETZEN
	1154	case $remote_host in
	1155	(t3eb) queue=berte; memory=60; cputime=1000; xoption="-X 0";;
	1156	(t3eh) queue=comp_t3e; memory=60; cputime=360;;
	1157	(t3ej2) queue=normal; memory=60; cputime=1000; xoption="-X 0";;
[5]	1158	(t3ej5\|ground.yonsei.ac.kr) printf "\n --- remote host \"$remote_host\" does not allow batch jobs"; continue;;
[1]	1159	esac
	1160
	1161
	1162	# BATCH-JOB ZUSAMMENSTELLEN
	1163	printf "\n *** creating batch-job for remote host"
	1164	echo " " > mbuild_job
	1165
	1166	# AUF CRAY-RECHNERN IN JUELICH WIRD KEIN BENUTZER-PROFILE AUSGEFUEHRT
	1167	# DIES WIRD HIER GETAN, UM PFADE USW. ZU SETZEN
	1168	if [[ $remote_host = t3ej2 ]]
	1169	then
	1170	echo "set +vx" >> mbuild_job
	1171	echo ". .profile" >> mbuild_job
	1172	echo "set -x" >> mbuild_job
	1173	fi
	1174
	1175	# AUF CRAY-RECHNERN GELADENE MODULE AUFLISTEN
	1176	if [[ $host = t3eb \|\| $host = t3eh \|\| $host = t3ej2 ]]
	1177	then
	1178	echo "module list" >> mbuild_job
	1179	fi
	1180
	1181
	1182	# WECHSEL IN TEMPORAERES VERZEICHNIS
	1183	echo "cd ${remote_md}" >> mbuild_job
	1184
	1185
	1186	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	1187	echo "scp ${local_username}@${local_addres}:~/modell/code_3dp/palm_current_version/${mainprog}_sources.tar ${mainprog}_sources.tar" >> mbuild_job
	1188	# echo "[[ \$? != 0 ]] && (echo "+++ scp failed"; exit)" >> mbuild_job
	1189
	1190
	1191	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
	1192	echo "[[ -f ${mainprog}_current_version.tar ]] && tar -xvf ${mainprog}_current_version.tar" >> mbuild_job
	1193
	1194
	1195	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
	1196	echo "tar -xvf ${mainprog}_sources.tar" >> mbuild_job
	1197
	1198
	1199	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1200	echo "make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " >> mbuild_job
	1201	echo "chmod u+w *" >> mbuild_job
	1202
	1203	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
	1204	echo "tar -cvf ${mainprog}_current_version.tar .f90 .o" >> mbuild_job
	1205
	1206
	1207	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
	1208	echo "make clean" >> mbuild_job
	1209	echo "rm ${mainprog}_sources.tar" >> mbuild_job
	1210	echo "rm *.f90 Makefile" >> mbuild_job
	1211
	1212
	1213
	1214	# JOB MITTELS SUBJOB STARTEN
	1215	printf "\n *** sending batch job to remote host"
	1216	# subjob $xoption -h $remote_host -q $queue -m $memory -t $cputime -v mbuild_job
	1217
	1218
	1219	# JOBFILE LOESCHEN
	1220	# rm aljob
	1221
	1222	else
	1223
	1224	if [[ $remote_host != $local_host ]]
	1225	then
	1226
[40]	1227	if [[ $compile_utility_programs = false ]]
[1]	1228	then
	1229
[40]	1230	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	1231	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
	1232	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
	1233	if [[ $remote_host != lctit ]]
	1234	then
	1235	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
	1236	else
	1237	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
	1238	# MIT SSH, DESHALB AUFRUF PER PIPE
	1239	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
	1240	fi
	1241	if [[ $local_host = decalpha ]]
	1242	then
	1243	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTÄNDIGEN PFADES
	1244	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1245	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1246	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
	1247	/bin/scp ${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
	1248	else
	1249	scp ${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
	1250	fi
[1]	1251
	1252
	1253
[40]	1254	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
	1255	echo " *** untar previous update on remote host, if existing"
	1256	if [[ $remote_host != lctit ]]
	1257	then
	1258	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
	1259	else
	1260	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
	1261	# MIT SSH, DESHALB AUFRUF PER PIPE
	1262	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
	1263	fi
[1]	1264
	1265
[40]	1266	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
	1267	echo " *** untar actual sources on remote host"
	1268	if [[ $remote_host != lctit ]]
	1269	then
	1270	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
	1271	else
	1272	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
	1273	# MIT SSH, DESHALB AUFRUF PER PIPE
	1274	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
	1275	fi
[1]	1276
	1277
[40]	1278	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1279	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
	1280	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
	1281	# Z.B. DIE PFADE ZUM COMPILER)
	1282	echo " *** execute \"make\" on remote host"
[1]	1283
[40]	1284	if [[ $remote_host = nech ]]
	1285	then
	1286	make_call_string="sxmake PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1287	else
	1288	make_call_string="make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1289	fi
	1290
	1291	if [[ $remote_host = t3eh ]]
	1292	then
[1]	1293
[40]	1294	print "xterm\nexit\n cd ${remote_md}; make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1295
[40]	1296	elif [[ $remote_host = t3ej2 \|\| $remote_host = ibms \|\| $remote_host = ibmy ]]
	1297	then
[1]	1298
[40]	1299	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1300
[40]	1301	elif [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
	1302	then
[1]	1303
[40]	1304	print "export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1305
[181]	1306	elif [[ $remote_host = lcsgib \|\| $remote_host = lcsgih ]]
	1307	then
	1308
	1309	print ". /usr/share/modules/init/bash; module load mvapich/mvapich-0.9.9-intel; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1310	# print ". /usr/share/modules/init/bash; module load mvapich2/1.2-intel; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1311
[40]	1312	elif [[ $remote_host = lctit ]]
	1313	then
[1]	1314
[40]	1315	echo " " > ${remote_host}_last_make_protokoll
	1316	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
	1317	do
	1318	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1319	done
[1]	1320
[40]	1321	else
[1]	1322
[40]	1323	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1324
[40]	1325	fi
[1]	1326
[40]	1327	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
[1]	1328	then
[40]	1329	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
	1330	if [[ $silent = false ]]
	1331	then
	1332	answer=dummy
	1333	printf "\n"
	1334	while [[ "$answer" != c && "$answer" != k ]]
	1335	do
	1336	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
	1337	read answer
	1338	if [[ "$answer" = l ]]
	1339	then
	1340	more ${remote_host}_last_make_protokoll
	1341	fi
	1342	done
	1343	if [[ $answer = k ]]
[1]	1344	then
[40]	1345	locat=user_abort; exit
[1]	1346	fi
	1347	fi
	1348	fi
	1349
	1350
	1351
[40]	1352	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
	1353	printf "\n *** tar update on remote host ..."
	1354	if [[ $remote_host != lctit ]]
	1355	then
[181]	1356	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod"
[40]	1357	else
	1358	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
	1359	# MIT SSH, DESHALB AUFRUF PER PIPE
[181]	1360	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar ${mainprog} .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
[40]	1361	fi
[1]	1362
	1363
[40]	1364	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
	1365	# printf "\n *** \"make clean\" on remote host ..."
	1366	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
	1367	# printf "\n"
[1]	1368
	1369
[25]	1370
	1371
[22]	1372	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
	1373	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	1374	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
[40]	1375	elif [[ $compile_utility_programs = true ]]
[22]	1376	then
	1377
[24]	1378	printf "\n\n"
[27]	1379	echo " *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
	1380	cd ${local_source_path}/../SCRIPTS
[22]	1381
	1382	if [[ $remote_host != lctit ]]
	1383	then
[24]	1384	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
[22]	1385	else
	1386	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
	1387	# MIT SSH, DESHALB AUFRUF PER PIPE
[24]	1388	print "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_addres} 2>&1
[22]	1389	fi
	1390
[27]	1391	# KOPIEREN DER SCRIPTE
[22]	1392	if [[ $local_host = decalpha ]]
	1393	then
	1394	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTÄNDIGEN PFADES
	1395	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1396	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1397	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
[27]	1398	/bin/scp batch_scp mbuild mrun subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
	1399	else
[28]	1400	scp batch_scp mbuild mrun subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
[27]	1401	fi
	1402
	1403	cd - > /dev/null
	1404	cd ${local_source_path}/../UTIL
	1405
	1406
	1407	# KOPIEREN DER UTILITY-PROGRAMME
	1408	if [[ $local_host = decalpha ]]
	1409	then
	1410	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTÄNDIGEN PFADES
	1411	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1412	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1413	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
[24]	1414	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
[22]	1415	else
[24]	1416	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
[22]	1417	fi
	1418
	1419
	1420
	1421	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1422	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
	1423	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
	1424	# Z.B. DIE PFADE ZUM COMPILER)
	1425	echo " *** execute \"make\" on remote host"
	1426
	1427	if [[ $remote_host = nech ]]
	1428	then
[27]	1429	make_call_string="sxmake F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
[22]	1430	else
[27]	1431	make_call_string="make F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
[22]	1432	fi
	1433
	1434	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
	1435	then
	1436
[25]	1437	ssh ${remote_username}@${remote_addres} "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
[22]	1438
	1439	elif [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
	1440	then
	1441
[25]	1442	print "export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres}
[22]	1443
	1444	elif [[ $remote_host = lctit ]]
	1445	then
	1446
	1447	echo " " > ${remote_host}_last_make_protokoll
	1448	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
	1449	do
	1450	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1451	done
	1452
	1453	else
	1454
	1455	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1456
	1457	fi
	1458
	1459	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
	1460
[75]	1461	rm -rf ${remote_host}_last_make_protokoll
[22]	1462
[1]	1463	# NUR AUF EINEM HLRN-RECHNER UEBERSETZEN
	1464	[[ $remote_host = ibmb \|\| $remote_host = ibmh ]] && ibm_hb_done=true
	1465
	1466	else
	1467
[40]	1468	if [[ $compile_utility_programs = false ]]
	1469	then
[1]	1470
[40]	1471	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
	1472	echo " "
	1473	echo " *** execute \"make\" on local host"
[1]	1474
[40]	1475	make PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
	1476
	1477	if [[ $? != 0 ]]
[1]	1478	then
[40]	1479	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
	1480	if [[ $silent = false ]]
	1481	then
	1482	answer=dummy
	1483	printf "\n"
	1484	while [[ "$answer" != c && "$answer" != k ]]
	1485	do
	1486	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
	1487	read answer
	1488	if [[ "$answer" = l ]]
	1489	then
	1490	more ${remote_host}_last_make_protokoll
	1491	fi
	1492	done
	1493	if [[ $answer = k ]]
[1]	1494	then
[40]	1495	locat=user_abort; exit
[1]	1496	fi
	1497	fi
	1498	fi
	1499
	1500
[40]	1501	# NEUE VERSION AUF LOKALEM RECHNER ZUSAMMENPACKEN
	1502	printf "\n *** tar update on local host ..."
	1503	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
[1]	1504
[22]	1505
	1506	# COMPILE THE UTILITY PROGRAMS
[40]	1507	elif [[ $compile_utility_programs = true ]]
[22]	1508	then
	1509	printf "\n\n"
	1510	echo " *** compiling the utility programs ..."
	1511	cd ${local_source_path}/../UTIL
[35]	1512	make F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
[22]	1513	cd - > /dev/null
	1514	fi
	1515
	1516
[1]	1517	# NUR EINMAL AUF LCMUK UEBERSETZEN
	1518	[[ $remote_host = lcmuk ]] && lcmuk_done=true
	1519
	1520	fi
	1521
	1522	fi
	1523	done
	1524
	1525
	1526	if [[ $host_found = false ]]
	1527	then
	1528	if [[ $host = all ]]
	1529	then
	1530	printf "\n +++ no hosts found in configuration file"
	1531	else
	1532	printf "\n +++ host \"$host\" not found in configuration file"
	1533	fi
	1534	locat=config_file; exit
	1535	fi
	1536
	1537
	1538
	1539	# ABSCHLIESSENDE ARBEITEN
	1540	rm -f hosts_found_in_config_file
	1541

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |