Home

Context Navigation

source: palm/trunk/SCRIPTS/mbuild @ 162

Last change on this file since 162 was 116, checked in by raasch, 17 years ago
further preliminary updates concerning particle sorting and documentation
Property svn:keywords set to `Rev`
File size: 53.8 KB

Rev	Line
[1]	1	#!/bin/ksh
[66]	2	# mbuild - Programmuebersetzungsscript
	3	# $Id: mbuild 54 2007-03-08 00:00:02Z raasch $
[1]	4
	5	# Prozedur zur Uebersetzung von Programmteilen mittels make-Mechanismus
	6	# auf einem Remote-Rechner, ausgehend von Quellcode auf einem lokalen
	7	# Rechner
	8
	9	# Folgende Probleme existieren unter Linux, wenn keine AT&T-Korn-Shell
	10	# verwendet wird:
	11	# Wertzuweisungen an Variablen innerhalb von DO-Schleifen werden nicht
	12	# nach aussen weitergegeben. "while read line" funktioniert nicht
	13	# innerhalb einer Pipe.
	14
	15	# letzte Aenderung:
	16	# 06/05/02 - Siggi - Beginn der Entwicklung
	17	# 12/06/02 - Siggi - Abschluss der Entwicklungsarbeiten
	18	# 23/06/02 - Siggi - voerst kein make-clean, Abbruch bei batch-mode
	19	# 24/07/02 - Siggi - Keine Verwendung der temporaeren Datei tmp_mbuild
	20	# unter linux mehr noetig, da nun AT&T-Korn-Shell
	21	# benutzt wird
	22	# 12/09/02 - Siggi - ibmh (hanni.hlrn.de) validiert
	23	# 19/12/02 - Siggi - ibmb validiert
	24	# 05/02/03 - Siggi - hostname nobela included
	25	# 04/03/03 - Siggi - host nech included
	26	# 06/03/03 - Siggi - make_call_string is echoed without '' to
	27	# file LAST_MAKE_CALL (otherwise error on NEC, because
	28	# '' are part of compiler options
	29	# 16/03/03 - Siggi - Two underscores are placed in front of every define
	30	# string, in case that palm.f90 version contains
	31	# such strings
	32	# 16/04/03 - Siggi - First extensions for linux machines
	33	# 24/06/03 - Siggi - host orkan included
	34	# 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
	35	# 24/07/03 - Siggi - host maestro admitted
	36	# 06/08/03 - Siggi - host gregale admitted
	37	# 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
	38	# 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
	39	# 08/01/04 - Siggi - additional preprocessor directive for ibm included
	40	# (-D$OMP=OMP) in order to avoid problems with
	41	# OMP_NUM_THREADS
	42	# 09/01/04 - Siggi - action above cancelled
	43	# 28/01/04 - Siggi - action above re-cancelled
	44	# 08/03/04 - Siggi - host scirocco admitted
	45	# 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
	46	# the respective .f90 file is not listed in the makefile
	47	# and deletion is demanded by the user
	48	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
	49	# due to error in ssh installation (otherwise a prompt
	50	# for the password appears)
	51	# 23/07/04 - Siggi - changes due to the new berni configuration
	52	# (federation switch)
	53	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
	54	# 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
	55	# 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
	56	# 31/03/05 - Siggi - mbuild does not tar *.i files any more
	57	# 24/04/05 - Siggi - netcdf support on lcmuk
	58	# 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
	59	# 12/05/05 - Siggi - netcdf support on ibm
	60	# set OBJECT_MODE=64 for compiling on ibmb, ibmh
	61	# 18/05/05 - Siggi - netcdf support on nec
	62	# 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
	63	# 23/05/05 - Siggi - netcdf support on ibms
	64	# 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
	65	# 30/06/05 - Siggi - netcdf support on bora
	66	# 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
	67	# 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
	68	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
	69	# host gfdl5 (ibmy) admitted
	70	# 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
	71	# 20/01/06 - Siggi - cpp directive for ibmy
	72	# 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
	73	# 10/02/06 - Siggi - modifications for scp on decalpha
	74	# 13/04/06 - Siggi - ostria admitted
	75	# 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
	76	# 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
	77	# 29/05/05 - Siggi - atmos (lcide) admitted
	78	# 23/08/06 - Siggi - netcdf support for scirocco (notebook)
	79	# 24/11/06 - Siggi - breva and levanto admitted
	80	# 07/02/07 - Siggi - adapted for RIAM (neck)
[5]	81	# 10/02/07 - Siggi - all hpmuk-related code removed
[40]	82	# 02/03/07 - Siggi - compilation of utility programs and transfer of
[27]	83	# scripts to remote hosts added (option -u)
[66]	84	# 14/03/07 - Siggi - fimm admitted, revision number added to terminal
	85	# output
[69]	86	# 16/03/07 - Siggi - adjustments (netcdf) for lctit
	87	# adjustments for running under pdksh, local ip-addres
	88	# is not determined any more
[82]	89	# 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
	90	# from configuration file
	91	# host identifier (local_host) is read from config file
[116]	92	# 10/10/07 - Siggi - bugfix: handling of comment lines
[1]	93
	94
	95
	96	# VARIABLENVEREINBARUNGEN + DEFAULTWERTE
[22]	97	compile_utility_programs=false
[1]	98	config_file=.mrun.config
[67]	99	fimm=false
[1]	100	host=all
	101	host_found=false
	102	ibm_hb_done=false
	103	lcmuk_done=false
	104	locat=normal
	105	makefile=""
	106	remote_mode=interactive
	107	scirocco=false
	108	silent=false
	109	suf=f90
	110	update=false
[83]	111	working_directory=`pwd`
[1]	112
	113	typeset -i ih ihost=0
	114
[66]	115	typeset -R30 calltime
[1]	116	typeset -L20 column1
	117	typeset -L50 column2
	118	typeset -L70 column3
[67]	119	typeset -L40 version="MBUILD 2.0 Rev$Rev: 116 $"
[1]	120
	121	# FEHLERBEHANDLUNG
	122	# BEI EXIT:
[83]	123	trap 'rm -rf $working_directory/tmp_mbuild
[69]	124	if [[ $locat != normal ]]
[1]	125	then
	126	printf "\n\n +++ mbuild killed \n\n"
	127	else
	128	printf "\n\n *** mbuild finished \n\n"
	129	fi' exit
	130
	131
	132	# BEI TERMINAL-BREAK:
[83]	133	trap 'rm -rf $working_directory/tmp_mbuild
[69]	134	printf "\n\n +++ mbuild killed by \"^C\" \n\n"
[1]	135	exit
	136	' 2
	137
	138
	139
	140	# SHELLSCRIPT-OPTIONEN EINLESEN
[22]	141	while getopts :c:h:m:rs:u option
[1]	142	do
	143	case $option in
	144	(c) config_file=$OPTARG;;
	145	(h) host=$OPTARG;;
	146	(m) makefile=$OPTARG;;
	147	(r) remote_mode=batch;;
	148	(s) suf=$OPTARG;;
[22]	149	(u) compile_utility_programs=true;;
[1]	150	(\?) printf "\n +++ unknown option $OPTARG \n";
	151	locat=parameter; exit;;
	152	esac
	153	done
	154
	155
	156
	157	# BATCH-MODE IST ZUR ZEIT NICHT FUNKTIONSFAEHIG
	158	if [[ $remote_mode = batch ]]
	159	then
	160	printf "\n +++ sorry, batch mode does not work! \n"
	161	locat=parameter; exit
	162	fi
	163
	164
	165
[82]	166	# PRUEFEN, OB KONFIGURATIONS-DATEI VORHANDEN
	167	if [[ ! -f $config_file ]]
	168	then
	169	printf "\n +++ configuration file: "
	170	printf "\n $config_file"
	171	printf "\n does not exist"
	172	locat=configuration; exit
	173	fi
	174
	175
	176
[1]	177	# LOKALEN RECHNER ERMITTELN
	178	local_host_real_name=$(hostname)
[69]	179	# local_addres=$(nslookup `hostname` 2>&1 \| grep "Address:" \| tail -1 \| awk '{print $2}')
	180
[1]	181
[82]	182
	183	# HOST-IDENTIFIER (local_host) AUS KONFIGURATIONSDATEI BESTIMMEN
	184	line=""
	185	grep "%host_identifier" $config_file > tmp_mbuild
	186	while read line
	187	do
[116]	188	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
[82]	189	then
	190	HOSTNAME=`echo $line \| cut -d" " -s -f2`
	191	host_identifier=`echo $line \| cut -d" " -s -f3`
[83]	192	if [[ $local_host_real_name = $HOSTNAME ]]
[82]	193	then
	194	local_host=$host_identifier
	195	break
	196	fi
	197	fi
	198	done < tmp_mbuild
	199
	200	if [[ "$local_host" = "" ]]
	201	then
	202	printf "\n +++ no host identifier found in configuration file \"$config_file\""
	203	printf "\n for local host \"$local_host_real_name\"."
	204	printf "\n Please add line"
	205	printf "\n \"\%host_identifier $local_host_real_name <identifier>\""
	206	printf "\n to the configuration file."
	207	locat=local_host; exit
	208	fi
	209
	210
	211
[1]	212	[[ $local_host_real_name = scirocco ]] && scirocco=true
[67]	213	[[ $local_host_real_name = fimm.bccs.uib.no ]] && fimm=true
[1]	214
	215
	216
	217	if [[ $local_host != ibms ]]
	218	then
	219	config_file=$PWD/$config_file
	220	else
	221	config_file=`pwd`/$config_file
	222	fi
	223
	224
	225
	226	# BENUTZERNAMEN AUF LOKALEM RECHNER AUS KONFIGURATIONSDATEI ERMITTELN
	227	line=""
[69]	228	grep " $local_host" $config_file \| grep "%remote_username" > tmp_mbuild
	229	while read line
[1]	230	do
[116]	231	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
[1]	232	then
	233	local_username=`echo $line \| cut -d" " -s -f2`
	234	fi
[69]	235	done < tmp_mbuild
[1]	236
[82]	237
[1]	238	if [[ "$local_username" = "" ]]
	239	then
	240	printf "\n +++ no user name found in configuration file"
	241	printf "\n for local host \"$local_host\" "
	242	locat=config_file; exit
	243	fi
	244
	245
[5]	246	# LOKALEN QUELLTEXTPFAD ERMITTELN.
	247	# ZUERST PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD FUER ALLE RECHNER
	248	# VEREINBART WURDE.
	249	# DAZU ZUNAECHST ALLE IN DER KONFIGURATIONSDATEI VEREINBARTEN GLOBALEN
	250	# VARIABLEN SETZEN, WEIL DIESE EVTL. IN PFADNAMEN VERWENDET WERDEN
	251	line=""
[69]	252	grep "%" $config_file > tmp_mbuild
	253	while read line
[5]	254	do
[116]	255	if [[ "$line" != "" && "$(echo $line \| cut -d" " -s -f3)" = "" && $(echo $line \| cut -c1) != "#" ]]
[1]	256	then
[5]	257	var=`echo $line \| cut -d" " -s -f1 \| cut -c2-`
	258	value=`echo $line \| cut -d" " -s -f2`
[8]	259	eval export $var=\$value
[9]	260	# eval echo \" $var=\$$var \" # AUSGABE ZU TESTZWECKEN
[1]	261	fi
[69]	262	done < tmp_mbuild
[1]	263
[5]	264	# NUN PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD VEREINBART WURDE
[1]	265	line=""
[69]	266	grep "%source_path" $config_file > tmp_mbuild
	267	while read line
[1]	268	do
	269	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	270	then
	271	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
	272	then
	273	global_source_path=`echo $line \| cut -d" " -s -f2`
	274	fi
	275	fi
[69]	276	done < tmp_mbuild
[1]	277
	278	line=""
[69]	279	grep " $local_host" $config_file \| grep "%source_path" > tmp_mbuild
	280	while read line
[1]	281	do
	282	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	283	then
	284	local_source_path=`echo $line \| cut -d" " -s -f2`
	285	fi
[69]	286	done < tmp_mbuild
[1]	287
	288	if [[ "$local_source_path" = "" ]]
	289	then
	290	if [[ "$global_source_path" != "" ]]
	291	then
	292	local_source_path=$global_source_path
	293	else
	294	printf "\n +++ no source path found in configuration file"
	295	printf "\n for local host \"$local_host\" "
	296	printf "\n please set \"\%source_path\" in configuration file"
	297	locat=config_file; exit
	298	fi
	299	fi
	300	eval local_source_path=$local_source_path
[8]	301	eval local_source_path=$local_source_path
[1]	302
	303
	304	# EBENSO PFAD FUER DAS MAKE-DEPOSITORY ERMITTELN
	305	line=""
[69]	306	grep "%depository_path" $config_file > tmp_mbuild
	307	while read line
[1]	308	do
	309	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	310	then
	311	if [[ "$(echo $line \| cut -d" " -s -f3)" = "" ]]
	312	then
	313	global_depository_path=`echo $line \| cut -d" " -s -f2`
	314	fi
	315	fi
[69]	316	done < tmp_mbuild
[1]	317
	318	line=""
[69]	319	grep " $local_host" $config_file \| grep "%depository_path" > tmp_mbuild
	320	while read line
[1]	321	do
	322	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	323	then
	324	local_depository_path=`echo $line \| cut -d" " -s -f2`
	325	fi
[69]	326	done < tmp_mbuild
[1]	327
	328	if [[ "$local_depository_path" = "" ]]
	329	then
	330	if [[ "$global_depository_path" != "" ]]
	331	then
	332	local_depository_path=$global_depository_path
	333	else
	334	printf "\n +++ no depository path found in configuration file"
	335	printf "\n for local host \"$local_host\" "
	336	printf "\n please set \"\%depository_path\" in configuration file"
	337	locat=config_file; exit
	338	fi
	339	fi
	340	eval local_depository_path=$local_depository_path
[8]	341	eval local_depository_path=$local_depository_path
[1]	342
	343
	344
[5]	345	# PRUEFEN, OB IN KONFIGURATIONSDATEI EIN HAUPTPROGRAMM
	346	# VEREINBART WURDE
	347	if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
	348	then
	349	printf "\n +++ no main program or more than one main program defined"
	350	printf "\n in configuration file"
	351	locat=configuration; exit
	352	else
	353	line=`grep "%mainprog" $config_file`
	354	if [[ "$line" = "" \|\| $(echo $line \| cut -c1) = "#" ]]
	355	then
	356	printf "\n +++ no main program defined in configuration file"
	357	locat=configuration; exit
	358	fi
	359	mainprog=`echo $line \| cut -d" " -s -f2 \| cut -d"." -f1`
	360	fi
	361
	362
	363
[1]	364	# MAKEFILE vorhanden
	365	[[ "$makefile" = "" ]] && makefile=$local_source_path/Makefile
	366	if [[ ! -f $makefile ]]
	367	then
	368	printf "\n +++ makefile: "
	369	printf "\n $makefile"
	370	printf "\n does not exist"
	371	locat=makefile; exit
	372	fi
	373
	374
	375	# HEADER-AUSGABE (TEIL1: MELDUNGEN UEBER LOKALEN RECHNER)
	376	calltime=$(date)
	377	printf "\n"
	378	printf "#------------------------------------------------------------------------# \n"
	379	printf "\| $version$calltime \| \n"
	380	printf "\| \| \n"
	381	column1="called on:"; column2=$local_host_real_name
	382	printf "\| $column1$column2 \| \n"
	383	column1="local username:"; column2=$local_username
	384	printf "\| $column1$column2 \| \n"
	385	column1="local IP-addres:"; column2=$local_addres
	386	printf "\| $column1$column2 \| \n"
	387	column1="config file:"; column2=$config_file
	388	printf "\| $column1$column2 \| \n"
	389	column1="makefile:"; column2=$makefile
	390	printf "\| $column1$column2 \| \n"
	391	column1="local source path:"; column2=$local_source_path
	392	printf "\| $column1$column2 \| \n"
	393	column1="make depository:"; column2=$local_depository_path
	394	printf "\| $column1$column2 \| \n"
	395	printf "#------------------------------------------------------------------------# \n"
	396
	397	# printf "\| \| \n"
	398
	399
[40]	400	if [[ $compile_utility_programs = false ]]
	401	then
[1]	402
[40]	403	cd $local_source_path
[1]	404
	405
[40]	406	# LISTE DER ZU PRUEFENDEN QUELLTEXTDATEIEN ERSTELLEN
	407	source_code_files=`ls -1 *.$suf`
[1]	408
	409
[40]	410
	411	# VERZEICHNIS FUER DAS MAKE-DEPOSITORY ERZEUGEN,
	412	# FALLS NOCH NICHT VORHANDEN. ANSONSTEN ALLE DATEIEN
	413	# NEUEREN DATUMS IN DIESES VERZEICHNIS KOPIEREN
	414	if [[ ! -d $local_depository_path ]]
[1]	415	then
[40]	416	if mkdir $local_depository_path
	417	then
	418	printf "\n\n *** directory for make depository:"
	419	printf "\n $local_depository_path"
	420	printf "\n was created\n"
[1]	421
[40]	422	# MAKEFILE UND QUELLTEXTDATEIEN UNTER BEIBEHALTUNG
	423	# IHRES DATUMS INS VERZEICHNIS KOPIEREN
	424	printf "\n *** makefile and source code files are copied to"
	425	printf "\n $local_depository_path\n"
	426	printf "\n copying makefile \"$makefile\" ..."
	427	cp -p $makefile $local_depository_path/Makefile
[1]	428
[40]	429	# QUELLTEXTDATEIEN MUESSEN IM MAKEFILE AUFGEFUEHRT
	430	# SEIN
	431	for filename in $source_code_files
	432	do
	433	if [[ $(grep -c $filename $makefile) = 0 ]]
	434	then
	435	printf "\n +++ source code file:"
	436	printf "\n $filename"
	437	printf "\n is not listed in makefile"
	438	locat=makefile; exit
	439	else
	440	printf "\n copying source code file \"$filename\" ..."
	441	cp -p $filename $local_depository_path
	442	fi
	443	done
	444	printf "\n"
	445	else
	446	printf "\n +++ directory for make depository:"
	447	printf "\n $local_depository_path"
	448	printf "\n cannot be created"
	449	locat=local_depository_path; exit
	450	fi
	451	else
	452
	453	printf "\n *** checking file status ..."
	454
	455	# MAKEFILE KOPIEREN, FALLS NEUEREN DATUMS
	456	if [[ $makefile -nt $local_depository_path/Makefile ]]
	457	then
	458	printf "\n *** update of \"$makefile\" "
	459	cp -f -p $makefile $local_depository_path/Makefile
	460	update=true
	461
	462	# PRUEFEN, OB ALLE DATEIEN IM DEPOSITORY AUCH IM NEUEN MAKEFILE
	463	# VERZEICHNET SIND UND GEGEBENENFALLS DATEIEN LOESCHEN
	464	cd $local_depository_path
	465	source_code_files_in_depository=`ls -1 *.$suf`
	466	for filename in $source_code_files_in_depository
	467	do
	468	if [[ $(grep -c $filename Makefile) = 0 ]]
	469	then
	470	printf "\n *** source code file in \"$local_depository_path\":"
	471	printf "\n $filename"
	472	printf "\n is not listed in makefile"
	473	if [[ $silent = false ]]
	474	then
	475	answer=dummy
	476	printf "\n\n"
	477	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
	478	do
	479	printf " >>> delete \"$filename\" in \"$local_depository_path\" (y/n) ? "
	480	read answer
	481	done
	482	if [[ $answer = y \|\| $answer = Y ]]
	483	then
	484	base=`echo $filename \| cut -d. -f2`
	485	rm -f $filename
	486	rm -f ${base}.o ${base}.mod
	487	printf "\n *** \"$filename\" deleted in \"$local_depository_path\" "
	488	else
	489	printf "\n *** \"$filename\" not deleted in \"$local_depository_path\" "
	490	fi
	491	fi
	492	fi
	493	done
	494	cd - > /dev/null 2>&1
	495
	496	elif [[ $local_depository_path/Makefile -nt $makefile ]]
	497	then
	498	printf "\n *** makefile in depository is newer than"
	499	printf "\n \"$makefile\" "
	500	if [[ $silent = false ]]
	501	then
	502	answer=dummy
	503	printf "\n\n"
	504	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
	505	do
	506	printf " >>> update \"$makefile\" (y/n) ? "
	507	read answer
	508	done
	509	if [[ $answer = y \|\| $answer = Y ]]
	510	then
	511	cp -f -p $local_depository_path/Makefile $makefile
	512	printf "\n *** \"$makefile\" updated"
	513	else
	514	printf "\n *** \"$makefile\" not updated"
	515	fi
	516	fi
	517	fi
	518
	519	# QUELLTEXTDATEIEN KOPIEREN, FALLS NEUEREN DATUMS
	520	# SIE MUESSEN IM MAKEFILE AUFGEFUEHRT SEIN
[1]	521	for filename in $source_code_files
	522	do
	523	if [[ $(grep -c $filename $makefile) = 0 ]]
	524	then
	525	printf "\n +++ source code file:"
	526	printf "\n $filename"
	527	printf "\n is not listed in makefile"
	528	locat=makefile; exit
	529	else
[40]	530	if [[ ! -f $local_depository_path/$filename ]]
	531	then
	532	cp -p $filename $local_depository_path
	533	printf "\n *** source code file \"$filename\" created in \"$local_depository_path\" "
	534	fi
	535	if [[ $filename -nt $local_depository_path/$filename ]]
	536	then
	537	printf "\n *** update of source code file \"$filename\" "
	538	cp -f -p $filename $local_depository_path
	539	update=true
	540	fi
[1]	541	fi
	542	done
	543
	544
[40]	545	# PRUEFEN, OB ALLE DATEIEN IM DEPOSITORY IM AKTUELLEN ARBEITSVERZEICHNIS VORHANDEN
	546	# ODER EVTL. NEUEREN DATUMS SIND
[1]	547	cd $local_depository_path
	548	source_code_files_in_depository=`ls -1 *.$suf`
[40]	549	cd - > /dev/null 2>&1
[1]	550	for filename in $source_code_files_in_depository
	551	do
[40]	552	if [[ ! -f $filename ]]
[1]	553	then
[40]	554	printf "\n *** source code file \"$filename\" does not exist in current directory"
[1]	555	if [[ $silent = false ]]
	556	then
	557	answer=dummy
	558	printf "\n\n"
	559	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
	560	do
[40]	561	printf " >>> create \"$filename\" in current directory (y/n) ? "
[1]	562	read answer
	563	done
	564	if [[ $answer = y \|\| $answer = Y ]]
	565	then
[40]	566	cp -p $local_depository_path/$filename $filename
	567	printf "\n *** source code file \"$filename\" created in current directory"
[1]	568	else
[40]	569	printf "\n *** source code file \"$filename\" not created in current directory"
[1]	570	fi
	571	fi
[40]	572	elif [[ $local_depository_path/$filename -nt $filename ]]
[1]	573	then
[40]	574	ls -al $local_depository_path/$filename
	575	ls -al $filename
	576	printf "\n *** source code file \"$filename\" in depository is newer than in current directory"
	577	if [[ $silent = false ]]
[1]	578	then
[40]	579	answer=dummy
	580	printf "\n\n"
	581	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
	582	do
	583	printf " >>> update \"$filename\" in current directory (y/n) ? "
	584	read answer
	585	done
	586	if [[ $answer = y \|\| $answer = Y ]]
	587	then
	588	cp -f -p $local_depository_path/$filename $filename
	589	printf "\n *** source code file \"$filename\" updated in current directory"
	590	else
	591	printf "\n *** source code file \"$filename\" not updated in current directory"
	592	fi
[1]	593	fi
	594	fi
[40]	595	done
	596
	597	if [[ $update = false ]]
[1]	598	then
[40]	599	printf "\n *** no updates necessary in \"$local_depository_path\" "
[1]	600	if [[ $silent = false ]]
	601	then
	602	answer=dummy
	603	printf "\n\n"
	604	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
	605	do
[40]	606	printf " >>> continue with updates on remote hosts (y/n) ? "
[1]	607	read answer
	608	done
[40]	609	if [[ $answer = n \|\| $answer = N ]]
[1]	610	then
[40]	611	locat=user_abort; exit
[1]	612	fi
	613	fi
	614	fi
	615	fi
	616
	617
	618
[40]	619	# QUELLTEXTDATEIEN UND MAKEFILE MIT TAR ZUSAMMENBINDEN
	620	# IN JEDEM FALL ALLEN DATEIEN WRITE-PERMIT GEBEN, DAMIT ES AUF
	621	# DEN REMOTE-RECHNERN NICHT EVTL. ZU PROBLEMEN BEIM UEBERSCHREIBEN KOMMT
	622	printf "\n\n *** tar of makefile and source files in depository ..."
	623	cd $local_depository_path
	624	chmod u+w Makefile *.$suf
	625	tar -cf ${mainprog}_sources.tar Makefile *.$suf
	626	printf "\n"
[1]	627
[40]	628	fi
[1]	629
	630
[40]	631
[1]	632	# BESTAETIGUNG ZUM WEITERMACHEN EINHOLEN
	633	if [[ $host = all ]]
	634	then
	635	printf "\n *** updates will be made for ALL hosts found in"
	636	printf "\n the configuration file"
	637	else
	638	printf "\n *** update will be made for host \"$host\" "
	639	fi
	640
	641	if [[ $silent = false ]]
	642	then
	643	answer=dummy
	644	printf "\n\n"
	645	while [[ "$answer" != y && "$answer" != Y && "$answer" != n && "$answer" != N ]]
	646	do
	647	printf " >>> continue (y/n) ? "
	648	read answer
	649	done
	650	if [[ $answer = n \|\| $answer = N ]]
	651	then
	652	locat=user_abort; exit
	653	fi
	654	fi
	655
	656
	657
	658
	659	# GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
	660	# VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
	661	printf "\n *** scanning configuration file for host(s) ..."
	662
[69]	663	grep %fopts $config_file > tmp_mbuild
	664	while read line
[1]	665	do
	666	# KOMMENTARZEILEN UEBERSPRINGEN
	667	[[ $(echo $line \| cut -c1) = "#" ]] && continue
	668	(( ihost = ihost + 1 ))
	669	hostline[$ihost]="$line"
[69]	670	done < tmp_mbuild
[1]	671
	672
	673	while (( ih < ihost ))
	674	do
	675
	676	(( ih = ih + 1 ))
	677
	678	# REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
	679	# NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
	680	# SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
	681	remote_host_string=`echo ${hostline[$ih]} \| cut -d" " -s -f3-`
	682	remote_host=`echo $remote_host_string \| cut -d" " -f1`
	683	if [[ $host != all ]]
	684	then
	685	[[ $remote_host != $host ]] && continue
	686	fi
	687	host_found=true
	688	condition1=`echo $remote_host_string \| cut -d" " -s -f2`
	689	if [[ $condition1 = $remote_host ]]
	690	then
	691	condition1=""
	692	else
	693	condition2=`echo $remote_host_string \| cut -d" " -s -f3`
	694	fi
	695
[82]	696	netcdf_inc=""
	697	netcdf_lib=""
[1]	698
	699	# AUF HLRN-RECHNER NUR EINMAL UEBERSETZEN
	700	if [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
	701	then
	702	if [[ $ibm_hb_done = true ]]
	703	then
	704	printf "\n *** remote host \"$remote_host\" skipped since compilation has already"
	705	printf "\n been carried out on one of the HLRN machines\n"
	706	continue
	707	fi
	708	fi
	709
	710	# AUF LCMUK-RECHNER NUR EINMAL UEBERSETZEN
	711	if [[ $remote_host = lcmuk ]]
	712	then
	713	if [[ $lcmuk_done = true ]]
	714	then
	715	printf "\n *** local host \"$remote_host\" skipped since compilation has already"
	716	printf "\n been carried out on this host\n"
	717	continue
	718	fi
	719	fi
	720
	721
	722	# IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
	723	case $remote_host in
[116]	724	(lcmuk) remote_addres=130.75.105.2;;
[83]	725	(lctit) remote_addres=172.17.75.161;;
	726	(decalpha) remote_addres=165.132.26.56;;
	727	(ibmb) remote_addres=130.73.230.10;;
	728	(ibmh) remote_addres=130.75.4.10;;
	729	(ibms) remote_addres=150.183.5.101;;
	730	(ibmy) remote_addres=165.132.26.58;;
	731	(nech) remote_addres=136.172.44.192;;
	732	(neck) remote_addres=133.5.178.11;;
	733	(ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
	734	(*) if [[ $local_host != $remote_host ]]
[1]	735	then
[83]	736	printf "\n +++ remote host \"$remote_host\" unknown";
	737	printf "\n please inform S. Raasch!"
[1]	738	fi;;
	739	esac
	740
	741
	742	# REMOTE-USERNAMEN ERMITTELN
	743	line=""
[116]	744	found=false
[69]	745	grep "$remote_host_string" $config_file \| grep "%remote_username" > tmp_mbuild
	746	while read line1
[1]	747	do
[116]	748
[1]	749	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	750	then
	751	line="$line1"
	752	fi
[116]	753
	754	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	755	then
	756	remote_username=`echo $line \| cut -d" " -s -f2`
	757	found=true
	758	fi
	759
[69]	760	done < tmp_mbuild
[1]	761
[116]	762	if [[ $found = false ]]
[1]	763	then
	764	printf "\n +++ no remote username found in configuration file"
	765	printf "\n for \"$remote_host_string\" "
	766	locat=config_file; exit
	767	fi
	768
	769
	770	# REMOTE-QUELLTEXTPFAD ERMITTELN
	771	line=""
[54]	772	remote_source_path=""
[69]	773	grep "$remote_host_string" $config_file \| grep "%source_path" > tmp_mbuild
	774	while read line1
[1]	775	do
[116]	776
[1]	777	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	778	then
	779	line="$line1"
	780	fi
[116]	781
	782	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	783	then
	784	remote_source_path=`echo $line \| cut -d" " -s -f2`
	785	fi
	786
[69]	787	done < tmp_mbuild
[1]	788
	789	if [[ "$remote_source_path" = "" ]]
	790	then
	791	if [[ "$global_source_path" != "" ]]
	792	then
	793	remote_source_path=$global_source_path
	794	else
	795	printf "\n +++ no source path found in configuration file"
	796	printf "\n for \"$remote_host_string\" "
	797	locat=config_file; exit
	798	fi
	799	fi
	800
[22]	801	remote_ud=${remote_source_path}/../UTIL
[24]	802	remote_ud=$(eval echo $remote_ud)
[1]	803
[54]	804
[1]	805	# REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
[54]	806	remote_md=""
[1]	807	line=""
[69]	808	grep "$remote_host_string" $config_file \| grep "%depository_path" > tmp_mbuild
	809	while read line1
[1]	810	do
[116]	811
[1]	812	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	813	then
	814	line="$line1"
	815	fi
[116]	816
	817	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	818	then
	819	remote_md=`echo $line \| cut -d" " -s -f2`
	820	fi
	821
[69]	822	done < tmp_mbuild
[1]	823
	824	if [[ "$remote_md" = "" ]]
	825	then
	826	if [[ "$global_depository_path" != "" ]]
	827	then
	828	remote_md=$global_depository_path
	829	else
	830	printf "\n +++ no depository path found in configuration file"
	831	printf "\n for \"$remote_host_string\" "
	832	printf "\n please set \"\%depository_path\" in configuration file"
	833	locat=config_file; exit
	834	fi
	835	fi
	836
[8]	837	remote_md=$(eval echo $remote_md)
[1]	838
[8]	839
[1]	840	# COMPILERNAMEN ERMITTELN
	841	line=""
[116]	842	found=false
[69]	843	grep "$remote_host_string" $config_file \| grep "%compiler_name " > tmp_mbuild
	844	while read line1
[1]	845	do
[116]	846
[1]	847	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	848	then
	849	line="$line1"
	850	fi
[116]	851
	852	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	853	then
	854	compiler_name=`echo $line \| cut -d" " -s -f2`
	855	found=true
	856	fi
	857
[69]	858	done < tmp_mbuild
[1]	859
[116]	860	if [[ $found = false ]]
[1]	861	then
	862	printf "\n +++ no compiler name found in configuration file"
	863	printf "\n for \"$remote_host_string\" "
	864	locat=config_file; exit
	865	fi
	866
	867
[27]	868	# BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
	869	# SERIELLER COMPILERNAME ERMITTELT WERDEN
	870	if [[ $(echo $remote_host_string \| grep -c parallel) = 1 ]]
	871	then
	872	line=""
[116]	873	found=false
[69]	874	grep "$remote_host_string" $config_file \| grep "%compiler_name_ser" > tmp_mbuild
	875	while read line1
[27]	876	do
[116]	877
[27]	878	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	879	then
	880	line="$line1"
	881	fi
[116]	882
	883	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	884	then
	885	compiler_name_ser=`echo $line \| cut -d" " -s -f2`
	886	found=true
	887	fi
	888
[69]	889	done < tmp_mbuild
[1]	890
[116]	891	if [[ $found = false ]]
[27]	892	then
[28]	893	printf "\n +++ no serial compiler name found in configuration file"
[27]	894	printf "\n for \"$remote_host_string\" "
	895	locat=config_file; exit
	896	fi
	897	else
	898	compiler_name_ser=$compiler_name
	899	fi
	900
	901
	902
[82]	903	# PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
	904	line=""
[116]	905	found=false
[82]	906	grep "$remote_host_string" $config_file \| grep "%cpp_options" > tmp_mbuild
	907	while read line1
	908	do
[116]	909
[82]	910	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	911	then
	912	line="$line1"
	913	fi
[116]	914
	915	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	916	then
	917	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	918	cpp_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	919	found=true
	920	fi
	921
[82]	922	done < tmp_mbuild
[116]	923
	924	if [[ $found = false ]]
[82]	925	then
	926	printf "\n +++ no preprocessor options found in configuration file"
	927	printf "\n for \"$remote_host_string\" "
	928	locat=config_file; exit
	929	fi
	930
[116]	931
[82]	932	# RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
	933	for string in $remote_host_string
	934	do
	935	if [[ $(echo $remote_host \| cut -c1-2) = lc && $(echo $string \| cut -c1-2) = lc ]]
	936	then
	937	cpp_options="$cpp_options -D__lc "
[83]	938	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $(echo $string \| cut -c1-3) = ibm ]]
	939	then
	940	cpp_options="${cpp_options},-D__ibm"
	941	elif [[ $(echo $remote_host \| cut -c1-3) = nec && $(echo $string \| cut -c1-3) = nec ]]
	942	then
	943	cpp_options="${cpp_options} -D__nec"
[82]	944	else
[83]	945	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
	946	then
	947	cpp_options="${cpp_options},-D__$string"
	948	else
	949	cpp_options="$cpp_options -D__$string "
	950	fi
[82]	951	fi
	952	done
	953
	954
	955
	956	# NETCDF-OPTIONEN ERMITTELN
	957	line=""
	958	grep "$remote_host_string" $config_file \| grep "%netcdf_inc" > tmp_mbuild
	959	while read line1
	960	do
[116]	961
[82]	962	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	963	then
	964	line="$line1"
	965	fi
[116]	966
	967	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	968	then
	969	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	970	netcdf_inc=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	971	fi
	972
[82]	973	done < tmp_mbuild
	974
	975	line=""
	976	grep "$remote_host_string" $config_file \| grep "%netcdf_lib" > tmp_mbuild
	977	while read line1
	978	do
[116]	979
[82]	980	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	981	then
	982	line="$line1"
	983	fi
[116]	984
	985	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	986	then
	987	# EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
	988	netcdf_lib=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	989	fi
	990
[82]	991	done < tmp_mbuild
	992
	993
	994
[1]	995	# COMPILEROPTIONEN ERMITTELN
	996	line=""
[116]	997	found=false
[69]	998	grep "$remote_host_string" $config_file \| grep "%fopts" > tmp_mbuild
	999	while read line1
[1]	1000	do
[116]	1001
[1]	1002	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	1003	then
	1004	line="$line1"
	1005	fi
[116]	1006
	1007	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	1008	then
	1009	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	1010	compiler_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	1011	found=true
	1012
	1013	# NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
	1014	compiler_options="$compiler_options $netcdf_inc"
	1015	fi
	1016
[69]	1017	done < tmp_mbuild
[116]	1018
	1019	if [[ $found = false ]]
[1]	1020	then
	1021	printf "\n +++ no compiler options found in configuration file"
	1022	printf "\n for \"$remote_host_string\" "
	1023	locat=config_file; exit
	1024	fi
[82]	1025
[1]	1026
	1027
	1028	# LADER-OPTIONEN ERMITTELN
	1029	line=""
[116]	1030	found=false
[69]	1031	grep "$remote_host_string" $config_file \| grep "%lopts" > tmp_mbuild
	1032	while read line1
[1]	1033	do
[116]	1034
[1]	1035	if [[ $(echo $line1 \| cut -d" " -s -f3-) = "$remote_host_string" ]]
	1036	then
	1037	line="$line1"
	1038	fi
[116]	1039
	1040	if [[ "$line" != "" && $(echo $line \| cut -c1) != "#" ]]
	1041	then
	1042	# EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
	1043	loader_options=`echo $line \| cut -d" " -s -f2 \| sed 's/::/%DUM%/g' \| sed 's/:/ /g' \| sed 's/%DUM%/:/g'`
	1044	found=true
	1045
	1046	# NETCDF-LIBRARY HINZUFUEGEN
	1047	loader_options="$loader_options $netcdf_lib"
	1048	fi
	1049
[69]	1050	done < tmp_mbuild
[1]	1051
[116]	1052	if [[ $found = false ]]
[1]	1053	then
	1054	printf "\n +++ no loader options found in configuration file"
	1055	printf "\n for \"$remote_host_string\" "
	1056	locat=config_file; exit
	1057	fi
[82]	1058
[1]	1059
	1060	printf "\n\n#------------------------------------------------------------------------# \n"
	1061	if [[ $remote_host = $local_host ]]
	1062	then
	1063	column1="remote_host:"; column2="$remote_host (= local host!)"
	1064	else
	1065	column1="remote_host:"; column2=$remote_host
	1066	fi
	1067	printf "\| $column1$column2 \| \n"
	1068	printf "\| \| \n"
	1069	column1="conditions:"; column2="$condition1 $condition2"
	1070	printf "\| $column1$column2 \| \n"
	1071	column1="make depository:"; column2=$remote_md
	1072	printf "\| $column1$column2 \| \n"
[25]	1073	if [[ $compile_utility_programs = true ]]
	1074	then
	1075	column1="utility directory:"; column2=$remote_ud
	1076	printf "\| $column1$column2 \| \n"
	1077	fi
[1]	1078	column1="username:"; column2=$remote_username
	1079	printf "\| $column1$column2 \| \n"
	1080	column1="addres:"; column2=$remote_addres
	1081	printf "\| $column1$column2 \| \n"
	1082	column1="compiler:"; column2=$compiler_name
	1083	printf "\| $column1$column2 \| \n"
[28]	1084	if [[ $compile_utility_programs = true ]]
	1085	then
	1086	column1="serial compiler:"; column2=$compiler_name_ser
	1087	printf "\| $column1$column2 \| \n"
	1088	fi
[1]	1089	column1="cpp options:"; column2=$cpp_options
	1090	printf "\| $column1$column2 \| \n"
	1091	line=$(echo "$cpp_options" \| cut -c51-)
	1092	while [[ "$line" != "" ]]
	1093	do
	1094	column1=""
	1095	column2=$line
	1096	printf "\| $column1$column2 \| \n"
	1097	line=$(echo "$line" \| cut -c51-)
	1098	done
	1099	column1="compiler options:"; column2=$compiler_options
	1100	printf "\| $column1$column2 \| \n"
	1101	line=$(echo "$compiler_options" \| cut -c51-)
	1102	while [[ "$line" != "" ]]
	1103	do
	1104	column1=""
	1105	column2=$line
	1106	printf "\| $column1$column2 \| \n"
	1107	line=$(echo "$line" \| cut -c51-)
	1108	done
	1109	column1="loader options:"; column2=$loader_options
	1110	printf "\| $column1$column2 \| \n"
	1111	line=$(echo "$loader_options" \| cut -c51-)
	1112	while [[ "$line" != "" ]]
	1113	do
	1114	column1=""
	1115	column2=$line
	1116	printf "\| $column1$column2 \| \n"
	1117	line=$(echo "$line" \| cut -c51-)
	1118	done
	1119	printf "#------------------------------------------------------------------------# \n"
	1120
	1121	if [[ $silent = false ]]
	1122	then
	1123	answer=dummy
	1124	printf "\n\n"
	1125	while [[ "$answer" != y && "$answer" != Y && "$answer" != c && "$answer" != C && "$answer" != s && "$answer" != S && "$answer" != a && "$answer" != A ]]
	1126	do
	1127	printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ? "
	1128	read answer
	1129	done
	1130	if [[ $answer = a \|\| $answer = A ]]
	1131	then
	1132	locat=user_abort; exit
	1133	fi
	1134	if [[ $answer = c \|\| $answer = C ]]
	1135	then
	1136	silent=false
	1137	fi
	1138	if [[ $answer = s \|\| $answer = S ]]
	1139	then
	1140	continue
	1141	fi
	1142	fi
	1143
	1144
	1145	if [[ $remote_mode = batch ]]
	1146	then
	1147
	1148	# BATCH-JOB PARAMETER SETZEN
	1149	case $remote_host in
	1150	(t3eb) queue=berte; memory=60; cputime=1000; xoption="-X 0";;
	1151	(t3eh) queue=comp_t3e; memory=60; cputime=360;;
	1152	(t3ej2) queue=normal; memory=60; cputime=1000; xoption="-X 0";;
[5]	1153	(t3ej5\|ground.yonsei.ac.kr) printf "\n --- remote host \"$remote_host\" does not allow batch jobs"; continue;;
[1]	1154	esac
	1155
	1156
	1157	# BATCH-JOB ZUSAMMENSTELLEN
	1158	printf "\n *** creating batch-job for remote host"
	1159	echo " " > mbuild_job
	1160
	1161	# AUF CRAY-RECHNERN IN JUELICH WIRD KEIN BENUTZER-PROFILE AUSGEFUEHRT
	1162	# DIES WIRD HIER GETAN, UM PFADE USW. ZU SETZEN
	1163	if [[ $remote_host = t3ej2 ]]
	1164	then
	1165	echo "set +vx" >> mbuild_job
	1166	echo ". .profile" >> mbuild_job
	1167	echo "set -x" >> mbuild_job
	1168	fi
	1169
	1170	# AUF CRAY-RECHNERN GELADENE MODULE AUFLISTEN
	1171	if [[ $host = t3eb \|\| $host = t3eh \|\| $host = t3ej2 ]]
	1172	then
	1173	echo "module list" >> mbuild_job
	1174	fi
	1175
	1176
	1177	# WECHSEL IN TEMPORAERES VERZEICHNIS
	1178	echo "cd ${remote_md}" >> mbuild_job
	1179
	1180
	1181	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	1182	echo "scp ${local_username}@${local_addres}:~/modell/code_3dp/palm_current_version/${mainprog}_sources.tar ${mainprog}_sources.tar" >> mbuild_job
	1183	# echo "[[ \$? != 0 ]] && (echo "+++ scp failed"; exit)" >> mbuild_job
	1184
	1185
	1186	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
	1187	echo "[[ -f ${mainprog}_current_version.tar ]] && tar -xvf ${mainprog}_current_version.tar" >> mbuild_job
	1188
	1189
	1190	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
	1191	echo "tar -xvf ${mainprog}_sources.tar" >> mbuild_job
	1192
	1193
	1194	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1195	echo "make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " >> mbuild_job
	1196	echo "chmod u+w *" >> mbuild_job
	1197
	1198	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
	1199	echo "tar -cvf ${mainprog}_current_version.tar .f90 .o" >> mbuild_job
	1200
	1201
	1202	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
	1203	echo "make clean" >> mbuild_job
	1204	echo "rm ${mainprog}_sources.tar" >> mbuild_job
	1205	echo "rm *.f90 Makefile" >> mbuild_job
	1206
	1207
	1208
	1209	# JOB MITTELS SUBJOB STARTEN
	1210	printf "\n *** sending batch job to remote host"
	1211	# subjob $xoption -h $remote_host -q $queue -m $memory -t $cputime -v mbuild_job
	1212
	1213
	1214	# JOBFILE LOESCHEN
	1215	# rm aljob
	1216
	1217	else
	1218
	1219	if [[ $remote_host != $local_host ]]
	1220	then
	1221
[40]	1222	if [[ $compile_utility_programs = false ]]
[1]	1223	then
	1224
[40]	1225	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	1226	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
	1227	echo " *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
	1228	if [[ $remote_host != lctit ]]
	1229	then
	1230	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})"
	1231	else
	1232	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
	1233	# MIT SSH, DESHALB AUFRUF PER PIPE
	1234	print "[[ ! -d ${remote_md} ]] && (echo \" *** ${remote_md} will be created\"; mkdir -p ${remote_md})" \| ssh ${remote_username}@${remote_addres} 2>&1
	1235	fi
	1236	if [[ $local_host = decalpha ]]
	1237	then
	1238	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTÄNDIGEN PFADES
	1239	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1240	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1241	remote_md=`echo $remote_md \| sed 's/\$HOME\///'`
	1242	/bin/scp ${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
	1243	else
	1244	scp ${mainprog}_sources.tar ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
	1245	fi
[1]	1246
	1247
	1248
[40]	1249	# FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
	1250	echo " *** untar previous update on remote host, if existing"
	1251	if [[ $remote_host != lctit ]]
	1252	then
	1253	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar"
	1254	else
	1255	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
	1256	# MIT SSH, DESHALB AUFRUF PER PIPE
	1257	print "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]] && tar -xf ${mainprog}_current_version.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
	1258	fi
[1]	1259
	1260
[40]	1261	# AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
	1262	echo " *** untar actual sources on remote host"
	1263	if [[ $remote_host != lctit ]]
	1264	then
	1265	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; tar -xf ${mainprog}_sources.tar"
	1266	else
	1267	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
	1268	# MIT SSH, DESHALB AUFRUF PER PIPE
	1269	print "cd ${remote_md}; tar -xf ${mainprog}_sources.tar" \| ssh ${remote_username}@${remote_addres} 2>&1
	1270	fi
[1]	1271
	1272
[40]	1273	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1274	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
	1275	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
	1276	# Z.B. DIE PFADE ZUM COMPILER)
	1277	echo " *** execute \"make\" on remote host"
[1]	1278
[40]	1279	if [[ $remote_host = nech ]]
	1280	then
	1281	make_call_string="sxmake PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1282	else
	1283	make_call_string="make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
	1284	fi
	1285
	1286	if [[ $remote_host = t3eh ]]
	1287	then
[1]	1288
[40]	1289	print "xterm\nexit\n cd ${remote_md}; make PROG=$mainprog F90=$compiler_name COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" " \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1290
[40]	1291	elif [[ $remote_host = t3ej2 \|\| $remote_host = ibms \|\| $remote_host = ibmy ]]
	1292	then
[1]	1293
[40]	1294	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1295
[40]	1296	elif [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
	1297	then
[1]	1298
[40]	1299	print "export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1300
[40]	1301	elif [[ $remote_host = lctit ]]
	1302	then
[1]	1303
[40]	1304	echo " " > ${remote_host}_last_make_protokoll
	1305	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
	1306	do
	1307	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1308	done
[1]	1309
[40]	1310	else
[1]	1311
[40]	1312	print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
[1]	1313
[40]	1314	fi
[1]	1315
[40]	1316	if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
[1]	1317	then
[40]	1318	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
	1319	if [[ $silent = false ]]
	1320	then
	1321	answer=dummy
	1322	printf "\n"
	1323	while [[ "$answer" != c && "$answer" != k ]]
	1324	do
	1325	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
	1326	read answer
	1327	if [[ "$answer" = l ]]
	1328	then
	1329	more ${remote_host}_last_make_protokoll
	1330	fi
	1331	done
	1332	if [[ $answer = k ]]
[1]	1333	then
[40]	1334	locat=user_abort; exit
[1]	1335	fi
	1336	fi
	1337	fi
	1338
	1339
	1340
[40]	1341	# NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
	1342	printf "\n *** tar update on remote host ..."
	1343	if [[ $remote_host != lctit ]]
	1344	then
	1345	ssh ${remote_username}@${remote_addres} "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar .f90 .o .mod"
	1346	else
	1347	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
	1348	# MIT SSH, DESHALB AUFRUF PER PIPE
	1349	print "cd ${remote_md}; chmod u+w ; tar -cf ${mainprog}_current_version.tar .f90 .o .mod" \| ssh ${remote_username}@${remote_addres} 2>&1
	1350	fi
[1]	1351
	1352
[40]	1353	# AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
	1354	# printf "\n *** \"make clean\" on remote host ..."
	1355	# ssh ${remote_username}@${remote_addres} "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
	1356	# printf "\n"
[1]	1357
	1358
[25]	1359
	1360
[22]	1361	# GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
	1362	# AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
	1363	# FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
[40]	1364	elif [[ $compile_utility_programs = true ]]
[22]	1365	then
	1366
[24]	1367	printf "\n\n"
[27]	1368	echo " *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
	1369	cd ${local_source_path}/../SCRIPTS
[22]	1370
	1371	if [[ $remote_host != lctit ]]
	1372	then
[24]	1373	ssh ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
[22]	1374	else
	1375	# TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
	1376	# MIT SSH, DESHALB AUFRUF PER PIPE
[24]	1377	print "[[ ! -d ${remote_ud} ]] && (echo \" * ${remote_ud} will be created\"; mkdir -p ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]] && (echo \" * ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)" \| ssh ${remote_username}@${remote_addres} 2>&1
[22]	1378	fi
	1379
[27]	1380	# KOPIEREN DER SCRIPTE
[22]	1381	if [[ $local_host = decalpha ]]
	1382	then
	1383	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTÄNDIGEN PFADES
	1384	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1385	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1386	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
[27]	1387	/bin/scp batch_scp mbuild mrun subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
	1388	else
[28]	1389	scp batch_scp mbuild mrun subjob ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS > /dev/null
[27]	1390	fi
	1391
	1392	cd - > /dev/null
	1393	cd ${local_source_path}/../UTIL
	1394
	1395
	1396	# KOPIEREN DER UTILITY-PROGRAMME
	1397	if [[ $local_host = decalpha ]]
	1398	then
	1399	# DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTÄNDIGEN PFADES
	1400	# IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
	1401	# KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
	1402	remote_ud=`echo $remote_ud \| sed 's/\$HOME\///'`
[24]	1403	/bin/scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
[22]	1404	else
[24]	1405	scp Makefile *.f90 ${remote_username}@${remote_addres}:${remote_ud} > /dev/null
[22]	1406	fi
	1407
	1408
	1409
	1410	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
	1411	# KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
	1412	# BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
	1413	# Z.B. DIE PFADE ZUM COMPILER)
	1414	echo " *** execute \"make\" on remote host"
	1415
	1416	if [[ $remote_host = nech ]]
	1417	then
[27]	1418	make_call_string="sxmake F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
[22]	1419	else
[27]	1420	make_call_string="make F90=$compiler_name F90_SER=$compiler_name_ser COPT=\"$cpp_options\" F90FLAGS=\"$compiler_options\" LDFLAGS=\"$loader_options\" "
[22]	1421	fi
	1422
	1423	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]]
	1424	then
	1425
[25]	1426	ssh ${remote_username}@${remote_addres} "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
[22]	1427
	1428	elif [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
	1429	then
	1430
[25]	1431	print "export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres}
[22]	1432
	1433	elif [[ $remote_host = lctit ]]
	1434	then
	1435
	1436	echo " " > ${remote_host}_last_make_protokoll
	1437	while [[ $(cat ${remote_host}_last_make_protokoll \| grep -c "Forwarding to N1GE") = 0 ]]
	1438	do
	1439	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1440	done
	1441
	1442	else
	1443
	1444	print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" \| ssh ${remote_username}@${remote_addres} 2>&1 \| tee ${remote_host}_last_make_protokoll
	1445
	1446	fi
	1447
	1448	fi # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
	1449
[75]	1450	rm -rf ${remote_host}_last_make_protokoll
[22]	1451
[1]	1452	# NUR AUF EINEM HLRN-RECHNER UEBERSETZEN
	1453	[[ $remote_host = ibmb \|\| $remote_host = ibmh ]] && ibm_hb_done=true
	1454
	1455	else
	1456
[40]	1457	if [[ $compile_utility_programs = false ]]
	1458	then
[1]	1459
[40]	1460	# MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
	1461	echo " "
	1462	echo " *** execute \"make\" on local host"
[1]	1463
[40]	1464	make PROG=$mainprog F90=$compiler_name COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options" 2>&1 \| tee ${remote_host}_last_make_protokoll
	1465
	1466	if [[ $? != 0 ]]
[1]	1467	then
[40]	1468	printf "\a\n +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
	1469	if [[ $silent = false ]]
	1470	then
	1471	answer=dummy
	1472	printf "\n"
	1473	while [[ "$answer" != c && "$answer" != k ]]
	1474	do
	1475	printf " >>> continue / list errors / kill mbuild (c/l/k) ? "
	1476	read answer
	1477	if [[ "$answer" = l ]]
	1478	then
	1479	more ${remote_host}_last_make_protokoll
	1480	fi
	1481	done
	1482	if [[ $answer = k ]]
[1]	1483	then
[40]	1484	locat=user_abort; exit
[1]	1485	fi
	1486	fi
	1487	fi
	1488
	1489
[40]	1490	# NEUE VERSION AUF LOKALEM RECHNER ZUSAMMENPACKEN
	1491	printf "\n *** tar update on local host ..."
	1492	tar -cf ${mainprog}_current_version.tar .$suf .o *.mod
[1]	1493
[22]	1494
	1495	# COMPILE THE UTILITY PROGRAMS
[40]	1496	elif [[ $compile_utility_programs = true ]]
[22]	1497	then
	1498	printf "\n\n"
	1499	echo " *** compiling the utility programs ..."
	1500	cd ${local_source_path}/../UTIL
[35]	1501	make F90=$compiler_name F90_SER=$compiler_name_ser COPT="$cpp_options" F90FLAGS="$compiler_options" LDFLAGS="$loader_options"
[22]	1502	cd - > /dev/null
	1503	fi
	1504
	1505
[1]	1506	# NUR EINMAL AUF LCMUK UEBERSETZEN
	1507	[[ $remote_host = lcmuk ]] && lcmuk_done=true
	1508
	1509	fi
	1510
	1511	fi
	1512	done
	1513
	1514
	1515	if [[ $host_found = false ]]
	1516	then
	1517	if [[ $host = all ]]
	1518	then
	1519	printf "\n +++ no hosts found in configuration file"
	1520	else
	1521	printf "\n +++ host \"$host\" not found in configuration file"
	1522	fi
	1523	locat=config_file; exit
	1524	fi
	1525
	1526
	1527
	1528	# ABSCHLIESSENDE ARBEITEN
	1529	rm -f hosts_found_in_config_file
	1530

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |