source: palm/trunk/SCRIPTS/batch_scp @ 676

Last change on this file since 676 was 306, checked in by letzel, 15 years ago
  • Typographical error (mrun)
  • Use option -p for all scp calls (batch_scp)
  • Modified output format (header)
  • Property svn:keywords set to Id
File size: 21.0 KB
Line 
1#! /bin/ksh
2# batch_scp - Shellskript         Version:  @(#)batch_scp 1.0a     25/10/05
3# $Id: batch_scp 306 2009-04-27 14:11:40Z suehring $
4
5     # Prozedur zum automatischen Transfer von Dateien mittels scp
6     #
7     # batch_scp hat 4 Argumente:
8     #         $1 = IP-Adresse des Zielrechners
9     #         $2 = zu uebertragende Datei
10     #         $3 = Verzeichnis, in das kopiert werden soll
11     #         $4 = Dateiname der Zieldatei
12
13
14     #                 ACHTUNG!!!!!!!!
15     #
16     # batch_scp hat noch folgenden grossen Mangel: wenn die Verzeichnisse
17     # auf den jeweiligen Remote-Rechnern aeltere Dateien beinhalten,
18     # die beim "ls -al" eine Jahreszahl und keine Uhrzeit (aa:bb) liefern,
19     # dann kann batch_scp die Dateinamen nicht ueberpruefen und findet
20     # z.B. bei -g die entsprechende Datei nicht!
21     #
22     #
23
24
25     # letzte Aenderung:
26     # 29/11/01 - Siggi - Entwicklungsbeginn
27     # 04/01/02 - Siggi - Version 1.0 funktionsfaehig
28     # 15/02/02 - Siggi - Verzeichnis-Listing umgestellt von "ls -al" auf "ls -1"
29     # 30/05/02 - Siggi - Abbruch mit exit 1 bei scp- oder ssh-Fehler
30     # 12/06/02 - Siggi - Version 1.0a, parent directories are also created, if
31     #                    directory on remote host does not exist
32     # 18/09/02 - Siggi - Fehlerabfragen korrigiert (waren wegen Klammerung
33     #                    unwirksam)
34     # 12/03/03 - Siggi - errfile and filelist are not stored in /tmp any more
35     #                    errors in execution of ssh does not lead
36     #                    to an abort on the NEC-system at DKRZ
37     # 01/04/03 - Siggi - small error concerning creation of catalogs removed
38     # 23/01/04 - Siggi - additional test output for scp on hurrikan
39     # 02/12/04 - Siggi - additional check of file size on remote host after scp.
40     #                    If the file sizes on local and remote host are equal,
41     #                    the scp exit status is ignored
42     # 03/12/04 - Siggi - additional checks of ssh actions independent of the
43     #                    ssh exit status
44     # 11/03/05 - Siggi - arguments are output in case of error exit
45     # 25/10/05 - Siggi - put of catalogs realized
46     # 27/04/09 - Marcus- use option -p for all scp calls
47
48
49 
50    # VARIABLENVEREINBARUNGEN + DEFAULTWERTE
51 random=$RANDOM
52
53 absolut=false
54 append=false
55 catalog_copy=false
56 check=false
57 delete=false
58 errfile=ftpcopy.errfile.$random
59 filelist=filelist.$random
60 get=false
61 local_host=`hostname`
62 locat=normal
63 make_catalog=false
64 overwrite=false
65 print_local_filename=false
66 quote_wait=false
67 remote_user=""
68 silent=false
69 transfermode=binary
70 zyklusnr=""
71 typeset -i iii icycle maxcycle=0 wait=0
72
73    # FEHLERBEHANDLUNG
74    # BEI EXIT:
75 trap 'if [[ $locat != normal ]]
76       then
77          cat $filelist $errfile
78          rm -rf $filelist $errfile
79          printf " +++ BATCH_SCP terminated \n"
80          printf "     locat     = $locat \n"
81          printf "     arguments = $1 $2 $3 $4 \n\n"
82          exit 1
83       fi' exit
84
85
86    # BEI TERMINAL-BREAK:
87 trap 'rm -rf $filelist $errfile
88       printf " +++ BATCH_SCP terminated \n\n"
89       exit 1
90      ' 2
91
92
93    # SHELLSCRIPT-OPTIONEN EINLESEN
94 while  getopts  :aAbcCdgmnoqsu:w:  option
95 do
96   case  $option  in
97       (a)   absolut=true;;
98       (A)   append=true;;
99       (b)   transfermode=binary;;
100       (c)   catalog_copy=true;;
101       (C)   check=true;;
102       (d)   delete=true;;
103       (g)   get=true;;
104       (m)   make_catalog=true;;
105       (n)   print_local_filename=true;;  # Option ist nicht dokumentiert !
106       (o)   overwrite=true;;
107       (q)   quote_wait=true;;
108       (s)   silent=true;;
109       (u)   remote_user=$OPTARG;;
110       (w)   wait=$OPTARG;;
111       (\?)  printf "  +++ option $OPTARG unknown \n"
112             printf "  --> call: batch_scp [-aAbcCdgmnoqsuw] <IP-adress> <localfile> <remotepath> <remotefile>\n"
113             locat=parameter;exit;;
114   esac
115 done
116 shift OPTIND-1
117
118
119 
120    # KURZE AUFRUFBESCHREIBUNG WIRD HIER AUSGEGEBEN
121 if [ "$1" = "?" ]
122 then
123   (printf "\n  *** batch_scp can be called as follows:\n"
124    printf "\n      batch_scp -a -b -d -g -o -q -s -u.. -w..  <param1> <param2> <param3> <param4>\n"
125    printf "\n      Description of available options:\n"
126    printf "\n      Option  Description                            Default-Value"
127    printf "\n        -a    Filenames are absolute. No cycle-      ---"
128    printf "\n              numbers will be determined"
129    printf "\n        -A    append to destination file             ---"
130    printf "\n        -b    use binary-modus for transfer          ASCII-modus"
131    printf "\n        -c    transfer of directory                  ---"
132    printf "\n        -C    check-Modus, no transfer               ---"
133    printf "\n        -d    file to be transferred will be         ---"
134    printf "\n              deleted after successful transfer"
135    printf "\n        -g    change of transfer direction, i.e.     ---"
136    printf "\n              file will be transferred from"
137    printf "\n              destination host"
138    printf "\n        -o    any existing file will be overwritten  ---"
139    printf "\n        -q    switch on  \"quote wait\"  on          ---"
140    printf "\n              estination host"
141    printf "\n        -s    do not display informative messages    ---"
142    printf "\n        -u    username on remote machine             <username>"
143    printf "\n        -w    waiting time in seconds, before trans- 0"
144    printf "\n              fer will be initiated"
145    printf "\n "
146    printf "\n      The positional parameters <param1> - <param4> must be provided at"
147    printf "\n      any time and have the following meaning:"
148    printf "\n        <param1>  -  IP-adress of destination host"
149    printf "\n                     or \"?\"  (creates this outline)"
150    printf "\n        <param2>  -  abs. or rel. path of file to be transferred"
151    printf "\n        <param3>  -  directory (abs.!) on destination host. Special cahracters"
152    printf "\n                     like \~ are allowed but must be quoted by \"."
153    printf "\n        <param4>  -  filename (without path!) on destination host; must not"
154    printf "\n                     be given, if option -c is used."
155    printf "\n      When using option -g, file will be copied from destination host to file"
156    printf "\n      <param2>. In this case, no overwriting is possible.") | more
157    exit
158 fi
159
160
161    # PRUEFEN, OB ALLE ARGUMENTE VORLIEGEN
162 if [[ "$1" = "" ]]
163 then
164    printf " +++ 1. argument missing \n"
165    locat=argument; exit
166 elif [[ "$2" = "" ]]
167 then
168    printf " +++ 2. argument missing \n"
169    locat=argument; exit
170 elif [[ "$3" = "" ]]
171 then
172    printf " +++ 3. argument missing \n"
173    locat=argument; exit
174 elif [[ "$4" = "" ]]
175 then
176    printf " +++ 4. argument missing \n"
177    locat=argument; exit
178 fi
179
180
181    # USER-NAME AUF ZIELRECHNER AUS .NETRC-DATEI ERMITTELN
182 if [[ -z $remote_user ]]
183 then
184
185       # PRUEFEN, OB NETRC-DATEI VORHANDEN
186    if [[ ! -f ~/.netrc ]]
187    then
188       printf " +++ option -u not given; \n"
189       printf "     getting remote-username from password file failed \n"
190       printf "     because ~/.netrc does not exist \n"
191       locat=netrc; exit
192    fi
193    grep  $1  ~/.netrc | read dum dum dum remote_user dum dum
194 fi
195
196
197    # APPEND IST NUR BEI TRANSFER EINZELNER DATEIEN OHNE UEBERSCHREIBEN
198    # ERLAUBT. GET IST DABEI EBENFALLS NICHT ERLAUBT
199 if [[ $append = true  &&  ( $get = true || $catalog_copy = true || $overwrite = true ) ]]
200 then
201    printf " +++ options -g, -c and -o are not allowed, if -A is given \n"
202    locat=parameter; exit
203 fi
204
205
206    # DATEINAME IM 4. ARGUMENT DARF NUR BEIM UEBERSCHREIBEN ODER IM ABSOLUT-
207    # MODUS PUNKTE ENTHALTEN
208 if [[ $overwrite = false  &&  $absolut = false  &&  $(echo $4 | grep -c "\.") != 0 ]]
209 then
210    printf " +++ 4th argument may only contain dots (".") , if one of the \n"
211    printf "     options -a or -o are given \n"
212    locat=argument; exit
213 fi
214
215
216    # QUOTE WAIT FUNKTIONIERT NICHT BEIM KOPIEREN GANZER VERZEICHNISSE
217 if [[ $quote_wait = true  &&  $catalog_copy = true ]]
218 then
219    printf " +++ options  -c  and  -q  must not be used simultaneously\n"
220    locat=parameter; exit
221 fi
222
223
224    # IM CHECK-MODUS WIRD SCRIPT HIER BEENDET
225 [[ $check = true ]]  &&  exit
226
227
228    # BESTIMMTE ZEIT WARTEN, BIS WEITERGEMACHT WIRD (NOETIG Z.B. BEI TRANSFER
229    # VON JOBPROTOKOLLEN AUS JOBS HERAUS)
230 sleep  $wait
231
232
233    # PRUEFEN, OB LOKALE DATEI/LOKALES VERZEICHNIS VORHANDEN BZW. NICHT VORHANDEN
234 if [[ $get = false ]]
235 then
236    if [[ $catalog_copy = false ]]
237    then
238       if [[ ! -f $2 ]]
239       then
240          printf " +++ file \"$2\" to be transferred does not exist \n"
241          locat=localfile; exit
242       fi
243    else
244       if [[ ! -d $2 ]]
245       then
246          printf " +++ directory \"$2\" to be transferred does not exist\n"
247          printf "     or is not a directory \n"
248          locat=localfile; exit
249       fi
250    fi
251 else
252    if [[ $catalog_copy = false ]]
253    then
254       if [[ -f $2 ]]
255       then
256          if [[ $overwrite = true ]]
257          then
258             rm  $2
259          else
260             printf " +++ local file \"$2\" is already existing \n"
261             locat=localfile; exit
262          fi
263       else
264
265             # PRUEFEN, OB SICH LOKALE DATEI ANLEGEN LAESST
266          local_dirname=`dirname $2`
267          if [[ ! -d $local_dirname ]]
268          then
269             printf " +++ local directory \"$local_dirname\" \n"
270             printf "     does not exist or is not a directory \n"
271             printf " +++ cannot copy file \"$3/$4\" \n"
272             printf "     from \"$1\" to \"$local_host\" \n"
273             locat=localfile; exit
274          fi
275       fi
276    else
277       if [[ -d $2  ||  -f $2 ]]
278       then
279          printf " +++ local directory \"$2\" is already existing, \n"
280          printf "     or a file with the same name exists \n"
281          locat=localfile; exit
282       fi
283    fi
284 fi
285
286
287    # VERZEICHNISLSTE DES ZIELRECHNERS ERSTELLEN
288 ssh $1 -l $remote_user "cd $3; ls -1; echo '*** list complete'" > $filelist  2>&1
289 ssh_status=$?
290
291 if [[ $ssh_status != 0 ]]
292 then
293    if [[ ! -f $filelist ]]
294    then
295       echo " local_host = $local_host   ssh_status = $ssh_status"
296       locat=ssh_failed_1; exit
297    else
298       if [[ $(grep -c "*** list complete" $filelist) = 0 ]]
299       then
300          echo " local_host = $local_host   ssh_status = $ssh_status"
301          locat=ssh_failed_2; exit
302       fi
303    fi
304 fi
305
306
307    # PRUEFEN, OB VERZEICHNIS VORHANDEN IST. WENN GANZES VERZEICHNISS ZUM
308    # ZIELRECHNER KOPIERT WERDEN SOLL, DARF DORT NOCH KEIN ENTSPRECHENDES
309    # VERZEICHNIS VORHANDEN SEIN
310 if [[ $(cat $filelist | grep -c "not found") != 0  || \
311       $(cat $filelist | grep -c "No such file or directory") != 0 ]]
312 then
313    if [[ ! ( $catalog_copy = true  &&  $get = false ) ]]
314    then
315       if [[ $make_catalog = false ]]
316       then
317          printf " +++ directory \"$3\" does not exist on destination host (\"$1\") \n"
318          locat=directory; exit
319       else
320          if [[ $silent = false ]]
321          then
322             printf "  >>> directory \"$3\" does not exist on destination host (\"$1\")"
323             printf "\n      trying to create \"$3\" \n"
324          fi
325
326          make_catalog=force
327       fi
328    fi
329 fi
330
331
332    # PRUEFEN, OB DATEI/VERZEICHNIS VORHANDEN, WENN JA, HOECHSTEN ZYKLUS
333    # ERMITTELN (BZW. IM ABSOLUT-MODUS PRUEFEN, OB DATEI VORHANDEN IST)
334    # DAS GANZE ABER NUR, WENN NICHT OVERWRITE-MODUS GEWAEHLT WURDE, DIE
335    # EVENTUELL VORHANDENE DATEI ALSO UEBERSCHRIEBEN WERDEN SOLL
336 found=false
337 if [[ ( $overwrite = false   &&  $get = false )  ||  $get = true ]]
338 then
339    while  read zeile
340    do
341       if [[ $absolut = false ]]
342       then
343          text=$(echo $zeile | cut -f1 -d".")
344          if [[ "$text" = "$4" ]]
345          then
346             found=true
347             cycle=$(echo $zeile | cut -f2 -d".")
348             if [[ "$cycle" = "$text" ]]
349             then
350                (( icycle = 0 ))
351             else
352
353                   # PRUEFEN, OB CYCLE EINE ZAHL IST
354                (( iii = 1 ))
355                character=`echo $cycle | cut -c$iii`
356                character_found=false
357                while [[ "$character" != ""  &&  $character_found = false ]]
358                do
359                   case  $character  in
360                      (0|1|2|3|4|5|6|7|8|9)  true;;
361                      (*)  character_found=true
362                   esac
363                   (( iii = iii + 1 ))
364                   character=`echo $cycle | cut -c$iii`
365                done
366
367                if [[ $character_found = false ]]
368                then
369                   (( icycle = $cycle ))
370                fi
371             fi >|$errfile 2>&1    # AUSGABE FEHLER AUF ERRFILE WENN CYCLE NICHTNUMERISCH
372
373
374                # INFORMATIVE AUSGABE, WENN DATEI NICHTNUMERISCHE EXTENSION HAT
375                # if [[ $(cat $errfile | grep -c "bad number") != 0 ]]
376             if [[ $character_found = true ]]
377             then
378                if [[ $cycle != "$5" ]]
379                then
380                   printf "  +++ file \"$text\" has non-numerical extension \".$cycle\" \n"
381                   locat=file; exit
382                else
383                   if [[ $silent = false ]]
384                   then
385                      printf "  >>> file \"$text\" has non-numerical extension \".$cycle\" \n"
386                   fi
387                fi
388             fi
389
390             if (( icycle > maxcycle ))
391             then
392                (( maxcycle = icycle ))
393             fi
394          fi
395
396       else
397
398             # IM ABSOLUT-MODUS MUSS NUR GEPRUEFT WERDEN, OB DIE DATEI
399             # VORHANDEN IST
400          [[ $4 = $zeile ]]  &&  found=true
401       fi
402
403    done <$filelist
404 fi
405
406 if [[ $found = true ]]
407 then
408    if [[ $get = false ]]
409    then
410       if [[ $absolut = false ]]
411       then
412          if [[ $append = false ]]
413          then
414             (( maxcycle = maxcycle + 1 ))
415             zyklusnr=".$maxcycle"
416          else
417             if (( maxcycle == 0 ))
418             then
419                zyklusnr=""
420             else
421                zyklusnr=".$maxcycle"
422             fi
423          fi
424       else
425          if [[ $overwrite = false ]]
426          then
427             printf "  +++ file \"$3/$4\" \n"
428             printf "      already exists on destination host (use -o, if necessary) \n"
429             locat=file; exit
430          fi
431       fi
432    else
433       if [[ $absolut = false ]]
434       then
435          if (( maxcycle == 0 ))
436          then
437             zyklusnr=""
438          else
439             zyklusnr=".$maxcycle"
440             (( maxcycle = 0 ))
441          fi
442       else
443          zyklusnr=""
444       fi
445    fi
446 else
447    zyklusnr=""
448
449       # ABBRUCH, WENN DATEI VON ZIELRECHNER GEHOLT WERDEN SOLL, DORT ABER
450       # NICHT VORHANDEN IST
451    if [[ $get = true ]]
452    then
453       printf " +++ file \"$3/$4\" \n"
454       printf "     does not exist on destination host (\"$1\") \n"
455       locat=remotefile; exit
456    fi
457 fi
458
459
460    # FALLS KATALOG ERZEUGT WIRD, DARF DIE DATEI IN KEINEM FALL EINE
461    # ZYKLUSNUMMER BESITZEN, DA SIE JA NOCh GARNICHT EXISTIEREN KANN
462 if [[ $make_catalog = force ]]
463 then
464    zyklusnr=""
465    (( maxcycle = 0 ))
466 fi
467
468 
469    # FALLS NAMENSOPTION (-n) GEWAEHLT WURDE, NUR DEN ERMITTELTEN LOKALEN
470    # DATEINAMEN DES ZIELRECHNERS AUSGEBEN UND SCRIPT BEENDEN
471 if [[ $print_local_filename = true ]]
472 then
473    printf "$4$zyklusnr\n"
474    rm -r $filelist
475    exit
476 fi
477
478
479    # FALLS 5. ARGUMENT ANGEGEBEN WURDE, WIRD DIES ALS FILE-EXTENSION
480    # HINTER DIE ZYKLUS-NUMMER GEHAENGT (FUNKTIONIERT NUR BEI KOPIEREN EINER
481    # DATEI AUF ZIELRECHNER
482 if [[ "$5" != ""  &&  $get = false ]]
483 then
484    zyklusnr=${zyklusnr}.$5
485 fi
486
487
488    # BEI VERZEICHNISTRANSFER VON ZIELRECHNER AUF LOKALEN RECHNER PRUEFEN, OB
489    # $3 AUF ZIELRECHNER WIRKLICH EIN VERZEICHNIS IST
490 if [[ $catalog_copy = true  &&  $get = true ]]
491 then
492    rm -rf $filelist
493    ssh $1 -l $remote_user "cd $3" > $filelist
494    if [[ $? != 0 ]]
495    then
496       locat=ssh_failed_3; exit
497    fi
498
499    if [[ $(cat $filelist | grep -c "Not a directory") != 0 ]]
500    then
501       printf " +++ \"$3\" on destination host is not a directory \n"
502       locat=directory; exit
503    fi
504 fi
505
506
507    # BEI KATALOGTRANSFER AUF LOKALEN RECHNER ENTSPRECHENDES VERZEICHNIS
508    # ANLEGEN
509 if [[ $catalog_copy = true ]]
510 then
511    if [[ $get = true ]]
512    then
513       mkdir $2
514    fi
515 fi
516
517
518    # Auf IBM-Rechnern (HLRN) Tilde aus Katalognamen entfernen, da scp
519    # diese nicht versteht
520 catalog_name=$3
521 if [[ $(hostname | cut -c1-4) = hreg  ||  $(hostname | cut -c1-4) = breg ]]
522 then
523    catalog_name=${catalog_name#"~/"}
524    catalog_name=${catalog_name#"~"}
525 fi
526 [[ "$catalog_name" != "" ]]  &&  catalog_name=${catalog_name}/
527
528
529    # DATEI/VERZEICHNIS PER SCP UEBERTRAGEN
530 if [[ $get = false ]]
531 then
532    if [[ $make_catalog != force ]]
533    then
534       if [[ $append = false ]]
535       then
536          if [[ $(echo $local_host | cut -c1-2) = cs ]]
537          then
538             if [[ $catalog_copy = false ]]
539             then
540                scp -p -q -v $2 $remote_user@$1:$catalog_name$4$zyklusnr
541             else
542                scp -p -r -q -v $2 $remote_user@$1:$catalog_name$4$zyklusnr
543             fi
544          else
545             if [[ $catalog_copy = false ]]
546             then
547                scp -p $2 $remote_user@$1:$catalog_name$4$zyklusnr  > /dev/null
548             else
549                scp -p -r $2 $remote_user@$1:$catalog_name$4$zyklusnr  > /dev/null
550             fi
551          fi
552          scp_status=$?
553
554          if [[ $scp_status != 0 ]]
555          then
556                # CHECK, OB DATEIGROESSEN AUF LOKALEM UND REMOTERECHNER
557                # UEBEREINSTIMMEN
558             local_size=`ls -al  $2`
559             local_size=`echo $local_size | cut -d" " -f5`
560
561             remote_size=`ssh $1 -l $remote_user "ls -al $catalog_name$4$zyklusnr"`
562             remote_size=`echo $remote_size | cut -d" " -f5`
563
564             if [[ "$remote_size" != "$local_size" ]]
565             then
566                echo " +++ scp failed on host \"$local_host\" with exit $scp_status"
567                echo "     local size = \"$local_size\"  remote size = \"$remote_size\" "
568                date
569                locat=scp_failed; exit
570             fi
571          fi
572       else
573          scp -p $2 $remote_user@$1:${catalog_name}batch_scp_append_file.$random  > /dev/null
574          if [[ $? != 0 ]]
575          then
576                # CHECK, OB DATEIGROESSEN AUF LOKALEM UND REMOTERECHNER
577                # UEBEREINSTIMMEN
578             local_size=`ls -al  $2`
579             local_size=`echo $local_size | cut -d" " -f5`
580
581             remote_size=`ssh $1 -l $remote_user "ls -al ${catalog_name}batch_scp_append_file.$random"`
582             remote_size=`echo $remote_size | cut -d" " -f5`
583
584             if [[ "$remote_size" != "$local_size" ]]
585             then
586                echo " +++ scp failed on host \"$local_host\" with exit $scp_status"
587                echo "     local size = \"$local_size\"  remote size = \"$remote_size\" "
588                date
589                locat=scp_for_append_failed; exit
590             fi
591          fi
592
593          rm  $filelist
594
595          ssh $1 -l $remote_user "cd $3; cat batch_scp_append_file.$random >> $4$zyklusnr; rm batch_scp_append_file.$random; echo '*** append complete'" > $filelist
596          if [[ $? != 0 ]]
597          then
598             if [[ ! -f $filelist ]]
599             then
600                locat=append_via_ssh_failed; exit
601             else
602                if [[ $(grep -c "*** append complete" $filelist) = 0 ]]
603                then
604                   locat=append_via_ssh_failed; exit
605                fi
606             fi
607          fi
608       fi
609    else
610       ssh $1 -l $remote_user "mkdir -p $3"
611       if [[ $? != 0 ]]
612       then
613          locat=ssh_failed_4; exit
614       fi
615       scp -p $2 $remote_user@$1:$catalog_name$4$zyklusnr  > /dev/null
616       if [[ $? != 0 ]]
617       then
618          locat=scp_failed; exit
619       fi
620    fi
621
622 else
623
624    if [[ $catalog_copy = false ]]
625    then
626       if [[ $quote_wait = true ]]
627       then
628
629          printf " +++ quote wait not realized with BATCH_SCP"
630          locat=unavailable_feature; exit
631
632       else
633
634          scp -p $remote_user@$1:$catalog_name$4$zyklusnr $2  > /dev/null
635          if [[ $? != 0 ]]
636          then
637             locat=scp_failed; exit
638          fi
639
640       fi
641    else
642
643       printf " +++ get of whole cataloges not realized with BATCH_SCP so far"
644       locat=unavailable_feature; exit
645
646#       ftp -i $1 << %END%  > /dev/null
647#$transfermode
648#cd $3
649#mget *
650#quit
651#%END%
652    fi
653 fi
654
655
656
657    # EVTL. TRANSFERIERTE DATEI AUF LOKALEM RECHNER LOESCHEN
658 if [[ $delete = true  &&  $get = false ]]
659 then
660    rm -rf  $2
661 fi
662
663
664
665    # ABSCHLUSSMELDUNG
666 if [[ $silent = false ]]
667 then
668    if (( maxcycle == 0 ))
669    then
670       if [[ $append = false ]]
671       then
672          printf "  >>> transfer successful \n"
673       else
674          printf "  >>> file was appended \n"
675       fi
676    else
677       printf "  >>> transfer successful \n"
678       if [[ $append = false ]]
679       then
680          if [[ $catalog_copy = false ]]
681          then
682             printf "      new file has cycle number $maxcycle \n"
683          else
684             printf "      new catalog has cycle number $maxcycle \n"
685          fi
686       else
687          printf "      append to cycle number $maxcycle \n"
688       fi
689    fi
690 fi
691
692 rm -rf  $filelist  $errfile
Note: See TracBrowser for help on using the repository browser.