Home

Context Navigation

batch_scp @ 1036

Last change on this file since 1036 was 693, checked in by raasch, 14 years ago

New:
---
adjustments for ibmkisti (pres, batch_scp, mbuild, mrun, subjob)

new default configuration files .mrun.config.yonsei2011 and .config_block_for_ibmkisti

Changed:

Errors:

bugfix: weighting coefficient added to ibm branch (pres)

Property svn:keywords set to Id

File size: 23.6 KB

Line
1	#! /bin/ksh
2	# batch_scp - Shellskript Version: @(#)batch_scp 1.0a 25/10/05
3	# $Id: batch_scp 693 2011-03-08 08:27:49Z raasch $
4
5	# Prozedur zum automatischen Transfer von Dateien mittels scp
6	#
7	# batch_scp hat 4 Argumente:
8	# $1 = IP-Adresse des Zielrechners
9	# $2 = zu uebertragende Datei
10	# $3 = Verzeichnis, in das kopiert werden soll
11	# $4 = Dateiname der Zieldatei
12
13
14	# ACHTUNG!!!!!!!!
15	#
16	# batch_scp hat noch folgenden grossen Mangel: wenn die Verzeichnisse
17	# auf den jeweiligen Remote-Rechnern aeltere Dateien beinhalten,
18	# die beim "ls -al" eine Jahreszahl und keine Uhrzeit (aa:bb) liefern,
19	# dann kann batch_scp die Dateinamen nicht ueberpruefen und findet
20	# z.B. bei -g die entsprechende Datei nicht!
21	#
22	#
23
24
25	# letzte Aenderung:
26	# 29/11/01 - Siggi - Entwicklungsbeginn
27	# 04/01/02 - Siggi - Version 1.0 funktionsfaehig
28	# 15/02/02 - Siggi - Verzeichnis-Listing umgestellt von "ls -al" auf "ls -1"
29	# 30/05/02 - Siggi - Abbruch mit exit 1 bei scp- oder ssh-Fehler
30	# 12/06/02 - Siggi - Version 1.0a, parent directories are also created, if
31	# directory on remote host does not exist
32	# 18/09/02 - Siggi - Fehlerabfragen korrigiert (waren wegen Klammerung
33	# unwirksam)
34	# 12/03/03 - Siggi - errfile and filelist are not stored in /tmp any more
35	# errors in execution of ssh does not lead
36	# to an abort on the NEC-system at DKRZ
37	# 01/04/03 - Siggi - small error concerning creation of catalogs removed
38	# 23/01/04 - Siggi - additional test output for scp on hurrikan
39	# 02/12/04 - Siggi - additional check of file size on remote host after scp.
40	# If the file sizes on local and remote host are equal,
41	# the scp exit status is ignored
42	# 03/12/04 - Siggi - additional checks of ssh actions independent of the
43	# ssh exit status
44	# 11/03/05 - Siggi - arguments are output in case of error exit
45	# 25/10/05 - Siggi - put of catalogs realized
46	# 27/04/09 - Marcus- use option -p for all scp calls
47	# 08/03/11 - Siggi - adjustments for ibmkisti: this machine allows
48	# outgoing ssh/scp connections only from the
49	# interactive nodes (gaiad). All ssh/scp traffic is
50	# done via this interactive node.
51
52
53
54	# VARIABLENVEREINBARUNGEN + DEFAULTWERTE
55	random=$RANDOM
56
57	absolut=false
58	append=false
59	catalog_copy=false
60	check=false
61	delete=false
62	errfile=ftpcopy.errfile.$random
63	filelist=filelist.$random
64	get=false
65	local_host=`hostname`
66	local_user=$USER
67	local_wdir=`pwd`
68	locat=normal
69	make_catalog=false
70	overwrite=false
71	print_local_filename=false
72	quote_wait=false
73	remote_user=""
74	silent=false
75	transfermode=binary
76	zyklusnr=""
77	typeset -i iii icycle maxcycle=0 wait=0
78
79	# FEHLERBEHANDLUNG
80	# BEI EXIT:
81	trap 'if [[ $locat != normal ]]
82	then
83	cat $filelist $errfile
84	rm -rf $filelist $errfile
85	printf " +++ BATCH_SCP terminated \n"
86	printf " locat = $locat \n"
87	printf " arguments = $1 $2 $3 $4 \n\n"
88	exit 1
89	fi' exit
90
91
92	# BEI TERMINAL-BREAK:
93	trap 'rm -rf $filelist $errfile
94	printf " +++ BATCH_SCP terminated \n\n"
95	exit 1
96	' 2
97
98
99	# SHELLSCRIPT-OPTIONEN EINLESEN
100	while getopts :aAbcCdgmnoqsu:w: option
101	do
102	case $option in
103	(a) absolut=true;;
104	(A) append=true;;
105	(b) transfermode=binary;;
106	(c) catalog_copy=true;;
107	(C) check=true;;
108	(d) delete=true;;
109	(g) get=true;;
110	(m) make_catalog=true;;
111	(n) print_local_filename=true;; # Option ist nicht dokumentiert !
112	(o) overwrite=true;;
113	(q) quote_wait=true;;
114	(s) silent=true;;
115	(u) remote_user=$OPTARG;;
116	(w) wait=$OPTARG;;
117	(\?) printf " +++ option $OPTARG unknown \n"
118	printf " --> call: batch_scp [-aAbcCdgmnoqsuw] <IP-adress> <localfile> <remotepath> <remotefile>\n"
119	locat=parameter;exit;;
120	esac
121	done
122	shift OPTIND-1
123
124
125
126	# KURZE AUFRUFBESCHREIBUNG WIRD HIER AUSGEGEBEN
127	if [ "$1" = "?" ]
128	then
129	(printf "\n *** batch_scp can be called as follows:\n"
130	printf "\n batch_scp -a -b -d -g -o -q -s -u.. -w.. <param1> <param2> <param3> <param4>\n"
131	printf "\n Description of available options:\n"
132	printf "\n Option Description Default-Value"
133	printf "\n -a Filenames are absolute. No cycle- ---"
134	printf "\n numbers will be determined"
135	printf "\n -A append to destination file ---"
136	printf "\n -b use binary-modus for transfer ASCII-modus"
137	printf "\n -c transfer of directory ---"
138	printf "\n -C check-Modus, no transfer ---"
139	printf "\n -d file to be transferred will be ---"
140	printf "\n deleted after successful transfer"
141	printf "\n -g change of transfer direction, i.e. ---"
142	printf "\n file will be transferred from"
143	printf "\n destination host"
144	printf "\n -o any existing file will be overwritten ---"
145	printf "\n -q switch on \"quote wait\" on ---"
146	printf "\n estination host"
147	printf "\n -s do not display informative messages ---"
148	printf "\n -u username on remote machine <username>"
149	printf "\n -w waiting time in seconds, before trans- 0"
150	printf "\n fer will be initiated"
151	printf "\n "
152	printf "\n The positional parameters <param1> - <param4> must be provided at"
153	printf "\n any time and have the following meaning:"
154	printf "\n <param1> - IP-adress of destination host"
155	printf "\n or \"?\" (creates this outline)"
156	printf "\n <param2> - abs. or rel. path of file to be transferred"
157	printf "\n <param3> - directory (abs.!) on destination host. Special cahracters"
158	printf "\n like \~ are allowed but must be quoted by \"."
159	printf "\n <param4> - filename (without path!) on destination host; must not"
160	printf "\n be given, if option -c is used."
161	printf "\n When using option -g, file will be copied from destination host to file"
162	printf "\n <param2>. In this case, no overwriting is possible.") \| more
163	exit
164	fi
165
166
167	# PRUEFEN, OB ALLE ARGUMENTE VORLIEGEN
168	if [[ "$1" = "" ]]
169	then
170	printf " +++ 1. argument missing \n"
171	locat=argument; exit
172	elif [[ "$2" = "" ]]
173	then
174	printf " +++ 2. argument missing \n"
175	locat=argument; exit
176	elif [[ "$3" = "" ]]
177	then
178	printf " +++ 3. argument missing \n"
179	locat=argument; exit
180	elif [[ "$4" = "" ]]
181	then
182	printf " +++ 4. argument missing \n"
183	locat=argument; exit
184	fi
185
186
187	# USER-NAME AUF ZIELRECHNER AUS .NETRC-DATEI ERMITTELN
188	if [[ -z $remote_user ]]
189	then
190
191	# PRUEFEN, OB NETRC-DATEI VORHANDEN
192	if [[ ! -f ~/.netrc ]]
193	then
194	printf " +++ option -u not given; \n"
195	printf " getting remote-username from password file failed \n"
196	printf " because ~/.netrc does not exist \n"
197	locat=netrc; exit
198	fi
199	grep $1 ~/.netrc \| read dum dum dum remote_user dum dum
200	fi
201
202
203	# APPEND IST NUR BEI TRANSFER EINZELNER DATEIEN OHNE UEBERSCHREIBEN
204	# ERLAUBT. GET IST DABEI EBENFALLS NICHT ERLAUBT
205	if [[ $append = true && ( $get = true \|\| $catalog_copy = true \|\| $overwrite = true ) ]]
206	then
207	printf " +++ options -g, -c and -o are not allowed, if -A is given \n"
208	locat=parameter; exit
209	fi
210
211
212	# DATEINAME IM 4. ARGUMENT DARF NUR BEIM UEBERSCHREIBEN ODER IM ABSOLUT-
213	# MODUS PUNKTE ENTHALTEN
214	if [[ $overwrite = false && $absolut = false && $(echo $4 \| grep -c "\.") != 0 ]]
215	then
216	printf " +++ 4th argument may only contain dots (".") , if one of the \n"
217	printf " options -a or -o are given \n"
218	locat=argument; exit
219	fi
220
221
222	# QUOTE WAIT FUNKTIONIERT NICHT BEIM KOPIEREN GANZER VERZEICHNISSE
223	if [[ $quote_wait = true && $catalog_copy = true ]]
224	then
225	printf " +++ options -c and -q must not be used simultaneously\n"
226	locat=parameter; exit
227	fi
228
229
230	# IM CHECK-MODUS WIRD SCRIPT HIER BEENDET
231	[[ $check = true ]] && exit
232
233
234	# BESTIMMTE ZEIT WARTEN, BIS WEITERGEMACHT WIRD (NOETIG Z.B. BEI TRANSFER
235	# VON JOBPROTOKOLLEN AUS JOBS HERAUS)
236	sleep $wait
237
238
239	# PRUEFEN, OB LOKALE DATEI/LOKALES VERZEICHNIS VORHANDEN BZW. NICHT VORHANDEN
240	if [[ $get = false ]]
241	then
242	if [[ $catalog_copy = false ]]
243	then
244	if [[ ! -f $2 ]]
245	then
246	printf " +++ file \"$2\" to be transferred does not exist \n"
247	locat=localfile; exit
248	fi
249	else
250	if [[ ! -d $2 ]]
251	then
252	printf " +++ directory \"$2\" to be transferred does not exist\n"
253	printf " or is not a directory \n"
254	locat=localfile; exit
255	fi
256	fi
257	else
258	if [[ $catalog_copy = false ]]
259	then
260	if [[ -f $2 ]]
261	then
262	if [[ $overwrite = true ]]
263	then
264	rm $2
265	else
266	printf " +++ local file \"$2\" is already existing \n"
267	locat=localfile; exit
268	fi
269	else
270
271	# PRUEFEN, OB SICH LOKALE DATEI ANLEGEN LAESST
272	local_dirname=`dirname $2`
273	if [[ ! -d $local_dirname ]]
274	then
275	printf " +++ local directory \"$local_dirname\" \n"
276	printf " does not exist or is not a directory \n"
277	printf " +++ cannot copy file \"$3/$4\" \n"
278	printf " from \"$1\" to \"$local_host\" \n"
279	locat=localfile; exit
280	fi
281	fi
282	else
283	if [[ -d $2 \|\| -f $2 ]]
284	then
285	printf " +++ local directory \"$2\" is already existing, \n"
286	printf " or a file with the same name exists \n"
287	locat=localfile; exit
288	fi
289	fi
290	fi
291
292
293	# VERZEICHNISLSTE DES ZIELRECHNERS ERSTELLEN
294	if [[ $(echo $local_host \| cut -c1-4) = gaia ]]
295	then
296	ssh $local_user@gaiad "ssh $1 -l $remote_user \"cd $3; ls -1; echo '*** list complete'\" " > $filelist 2>&1
297	else
298	ssh $1 -l $remote_user "cd $3; ls -1; echo '*** list complete'" > $filelist 2>&1
299	fi
300	ssh_status=$?
301
302	if [[ $ssh_status != 0 ]]
303	then
304	if [[ ! -f $filelist ]]
305	then
306	echo " local_host = $local_host ssh_status = $ssh_status"
307	locat=ssh_failed_1; exit
308	else
309	if [[ $(grep -c "*** list complete" $filelist) = 0 ]]
310	then
311	echo " local_host = $local_host ssh_status = $ssh_status"
312	locat=ssh_failed_2; exit
313	fi
314	fi
315	fi
316
317
318	# PRUEFEN, OB VERZEICHNIS VORHANDEN IST. WENN GANZES VERZEICHNISS ZUM
319	# ZIELRECHNER KOPIERT WERDEN SOLL, DARF DORT NOCH KEIN ENTSPRECHENDES
320	# VERZEICHNIS VORHANDEN SEIN
321	if [[ $(cat $filelist \| grep -c "not found") != 0 \|\| \
322	$(cat $filelist \| grep -c "No such file or directory") != 0 ]]
323	then
324	if [[ ! ( $catalog_copy = true && $get = false ) ]]
325	then
326	if [[ $make_catalog = false ]]
327	then
328	printf " +++ directory \"$3\" does not exist on destination host (\"$1\") \n"
329	locat=directory; exit
330	else
331	if [[ $silent = false ]]
332	then
333	printf " >>> directory \"$3\" does not exist on destination host (\"$1\")"
334	printf "\n trying to create \"$3\" \n"
335	fi
336
337	make_catalog=force
338	fi
339	fi
340	fi
341
342
343	# PRUEFEN, OB DATEI/VERZEICHNIS VORHANDEN, WENN JA, HOECHSTEN ZYKLUS
344	# ERMITTELN (BZW. IM ABSOLUT-MODUS PRUEFEN, OB DATEI VORHANDEN IST)
345	# DAS GANZE ABER NUR, WENN NICHT OVERWRITE-MODUS GEWAEHLT WURDE, DIE
346	# EVENTUELL VORHANDENE DATEI ALSO UEBERSCHRIEBEN WERDEN SOLL
347	found=false
348	if [[ ( $overwrite = false && $get = false ) \|\| $get = true ]]
349	then
350	while read zeile
351	do
352	if [[ $absolut = false ]]
353	then
354	text=$(echo $zeile \| cut -f1 -d".")
355	if [[ "$text" = "$4" ]]
356	then
357	found=true
358	cycle=$(echo $zeile \| cut -f2 -d".")
359	if [[ "$cycle" = "$text" ]]
360	then
361	(( icycle = 0 ))
362	else
363
364	# PRUEFEN, OB CYCLE EINE ZAHL IST
365	(( iii = 1 ))
366	character=`echo $cycle \| cut -c$iii`
367	character_found=false
368	while [[ "$character" != "" && $character_found = false ]]
369	do
370	case $character in
371	(0\|1\|2\|3\|4\|5\|6\|7\|8\|9) true;;
372	(*) character_found=true
373	esac
374	(( iii = iii + 1 ))
375	character=`echo $cycle \| cut -c$iii`
376	done
377
378	if [[ $character_found = false ]]
379	then
380	(( icycle = $cycle ))
381	fi
382	fi >\|$errfile 2>&1 # AUSGABE FEHLER AUF ERRFILE WENN CYCLE NICHTNUMERISCH
383
384
385	# INFORMATIVE AUSGABE, WENN DATEI NICHTNUMERISCHE EXTENSION HAT
386	# if [[ $(cat $errfile \| grep -c "bad number") != 0 ]]
387	if [[ $character_found = true ]]
388	then
389	if [[ $cycle != "$5" ]]
390	then
391	printf " +++ file \"$text\" has non-numerical extension \".$cycle\" \n"
392	locat=file; exit
393	else
394	if [[ $silent = false ]]
395	then
396	printf " >>> file \"$text\" has non-numerical extension \".$cycle\" \n"
397	fi
398	fi
399	fi
400
401	if (( icycle > maxcycle ))
402	then
403	(( maxcycle = icycle ))
404	fi
405	fi
406
407	else
408
409	# IM ABSOLUT-MODUS MUSS NUR GEPRUEFT WERDEN, OB DIE DATEI
410	# VORHANDEN IST
411	[[ $4 = $zeile ]] && found=true
412	fi
413
414	done <$filelist
415	fi
416
417	if [[ $found = true ]]
418	then
419	if [[ $get = false ]]
420	then
421	if [[ $absolut = false ]]
422	then
423	if [[ $append = false ]]
424	then
425	(( maxcycle = maxcycle + 1 ))
426	zyklusnr=".$maxcycle"
427	else
428	if (( maxcycle == 0 ))
429	then
430	zyklusnr=""
431	else
432	zyklusnr=".$maxcycle"
433	fi
434	fi
435	else
436	if [[ $overwrite = false ]]
437	then
438	printf " +++ file \"$3/$4\" \n"
439	printf " already exists on destination host (use -o, if necessary) \n"
440	locat=file; exit
441	fi
442	fi
443	else
444	if [[ $absolut = false ]]
445	then
446	if (( maxcycle == 0 ))
447	then
448	zyklusnr=""
449	else
450	zyklusnr=".$maxcycle"
451	(( maxcycle = 0 ))
452	fi
453	else
454	zyklusnr=""
455	fi
456	fi
457	else
458	zyklusnr=""
459
460	# ABBRUCH, WENN DATEI VON ZIELRECHNER GEHOLT WERDEN SOLL, DORT ABER
461	# NICHT VORHANDEN IST
462	if [[ $get = true ]]
463	then
464	printf " +++ file \"$3/$4\" \n"
465	printf " does not exist on destination host (\"$1\") \n"
466	locat=remotefile; exit
467	fi
468	fi
469
470
471	# FALLS KATALOG ERZEUGT WIRD, DARF DIE DATEI IN KEINEM FALL EINE
472	# ZYKLUSNUMMER BESITZEN, DA SIE JA NOCh GARNICHT EXISTIEREN KANN
473	if [[ $make_catalog = force ]]
474	then
475	zyklusnr=""
476	(( maxcycle = 0 ))
477	fi
478
479
480	# FALLS NAMENSOPTION (-n) GEWAEHLT WURDE, NUR DEN ERMITTELTEN LOKALEN
481	# DATEINAMEN DES ZIELRECHNERS AUSGEBEN UND SCRIPT BEENDEN
482	if [[ $print_local_filename = true ]]
483	then
484	printf "$4$zyklusnr\n"
485	rm -r $filelist
486	exit
487	fi
488
489
490	# FALLS 5. ARGUMENT ANGEGEBEN WURDE, WIRD DIES ALS FILE-EXTENSION
491	# HINTER DIE ZYKLUS-NUMMER GEHAENGT (FUNKTIONIERT NUR BEI KOPIEREN EINER
492	# DATEI AUF ZIELRECHNER
493	if [[ "$5" != "" && $get = false ]]
494	then
495	zyklusnr=${zyklusnr}.$5
496	fi
497
498
499	# BEI VERZEICHNISTRANSFER VON ZIELRECHNER AUF LOKALEN RECHNER PRUEFEN, OB
500	# $3 AUF ZIELRECHNER WIRKLICH EIN VERZEICHNIS IST
501	if [[ $catalog_copy = true && $get = true ]]
502	then
503	rm -rf $filelist
504	if [[ $(echo $local_host \| cut -c1-4) = gaia ]]
505	then
506	ssh $local_user@gaiad "ssh $1 -l $remote_user \"cd $3\" " > $filelist
507	else
508	ssh $1 -l $remote_user "cd $3" > $filelist
509	fi
510	if [[ $? != 0 ]]
511	then
512	locat=ssh_failed_3; exit
513	fi
514
515	if [[ $(cat $filelist \| grep -c "Not a directory") != 0 ]]
516	then
517	printf " +++ \"$3\" on destination host is not a directory \n"
518	locat=directory; exit
519	fi
520	fi
521
522
523	# BEI KATALOGTRANSFER AUF LOKALEN RECHNER ENTSPRECHENDES VERZEICHNIS
524	# ANLEGEN
525	if [[ $catalog_copy = true ]]
526	then
527	if [[ $get = true ]]
528	then
529	mkdir $2
530	fi
531	fi
532
533
534	# Auf IBM-Rechnern (HLRN) Tilde aus Katalognamen entfernen, da scp
535	# diese nicht versteht
536	catalog_name=$3
537	if [[ $(hostname \| cut -c1-4) = hreg \|\| $(hostname \| cut -c1-4) = breg ]]
538	then
539	catalog_name=${catalog_name#"~/"}
540	catalog_name=${catalog_name#"~"}
541	fi
542	[[ "$catalog_name" != "" ]] && catalog_name=${catalog_name}/
543
544
545	# DATEI/VERZEICHNIS PER SCP UEBERTRAGEN
546	if [[ $get = false ]]
547	then
548	if [[ $make_catalog != force ]]
549	then
550	if [[ $append = false ]]
551	then
552	if [[ $(echo $local_host \| cut -c1-2) = cs ]]
553	then
554	if [[ $catalog_copy = false ]]
555	then
556	scp -p -q -v $2 $remote_user@$1:$catalog_name$4$zyklusnr
557	else
558	scp -p -r -q -v $2 $remote_user@$1:$catalog_name$4$zyklusnr
559	fi
560	elif [[ $(echo $local_host \| cut -c1-4) = gaia ]]
561	then
562	if [[ $catalog_copy = false ]]
563	then
564	ssh $local_user@gaiad "cd $local_wdir; scp -p $2 $remote_user@$1:$catalog_name$4$zyklusnr" > /dev/null
565	else
566	ssh $local_user@gaiad "cd $local_wdir; scp -p -r $2 $remote_user@$1:$catalog_name$4$zyklusnr" > /dev/null
567	fi
568	else
569	if [[ $catalog_copy = false ]]
570	then
571	scp -p $2 $remote_user@$1:$catalog_name$4$zyklusnr > /dev/null
572	else
573	scp -p -r $2 $remote_user@$1:$catalog_name$4$zyklusnr > /dev/null
574	fi
575	fi
576	scp_status=$?
577
578	if [[ $scp_status != 0 ]]
579	then
580	# CHECK, OB DATEIGROESSEN AUF LOKALEM UND REMOTERECHNER
581	# UEBEREINSTIMMEN
582	local_size=`ls -al $2`
583	local_size=`echo $local_size \| cut -d" " -f5`
584
585	if [[ $(echo $local_host \| cut -c1-4) = gaia ]]
586	then
587	remote_size=`ssh $local_user@gaiad "ssh $1 -l $remote_user \"ls -al $catalog_name$4$zyklusnr\" "`
588	else
589	remote_size=`ssh $1 -l $remote_user "ls -al $catalog_name$4$zyklusnr"`
590	fi
591	remote_size=`echo $remote_size \| cut -d" " -f5`
592
593	if [[ "$remote_size" != "$local_size" ]]
594	then
595	echo " +++ scp failed on host \"$local_host\" with exit $scp_status"
596	echo " local size = \"$local_size\" remote size = \"$remote_size\" "
597	date
598	locat=scp_failed; exit
599	fi
600	fi
601	else
602	if [[ $(echo $local_host \| cut -c1-4) = gaia ]]
603	then
604	ssh $local_user@gaiad "cd $local_wdir; scp -p $2 $remote_user@$1:${catalog_name}batch_scp_append_file.$random" > /dev/null
605	else
606	scp -p $2 $remote_user@$1:${catalog_name}batch_scp_append_file.$random > /dev/null
607	fi
608	if [[ $? != 0 ]]
609	then
610	# CHECK, OB DATEIGROESSEN AUF LOKALEM UND REMOTERECHNER
611	# UEBEREINSTIMMEN
612	local_size=`ls -al $2`
613	local_size=`echo $local_size \| cut -d" " -f5`
614
615	if [[ $(echo $local_host \| cut -c1-4) = gaia ]]
616	then
617	remote_size=`ssh $local_user@gaiad "ssh $1 -l $remote_user \"ls -al ${catalog_name}batch_scp_append_file.$random\" "`
618	else
619	remote_size=`ssh $1 -l $remote_user "ls -al ${catalog_name}batch_scp_append_file.$random"`
620	fi
621	remote_size=`echo $remote_size \| cut -d" " -f5`
622
623	if [[ "$remote_size" != "$local_size" ]]
624	then
625	echo " +++ scp failed on host \"$local_host\" with exit $scp_status"
626	echo " local size = \"$local_size\" remote size = \"$remote_size\" "
627	date
628	locat=scp_for_append_failed; exit
629	fi
630	fi
631
632	rm $filelist
633
634	if [[ $(echo $local_host \| cut -c1-4) = gaia ]]
635	then
636	ssh $local_user@gaiad "ssh $1 -l $remote_user \"cd $3; cat batch_scp_append_file.$random >> $4$zyklusnr; rm batch_scp_append_file.$random; echo '*** append complete'\" " > $filelist
637	else
638	ssh $1 -l $remote_user "cd $3; cat batch_scp_append_file.$random >> $4$zyklusnr; rm batch_scp_append_file.$random; echo '*** append complete'" > $filelist
639	fi
640	if [[ $? != 0 ]]
641	then
642	if [[ ! -f $filelist ]]
643	then
644	locat=append_via_ssh_failed; exit
645	else
646	if [[ $(grep -c "*** append complete" $filelist) = 0 ]]
647	then
648	locat=append_via_ssh_failed; exit
649	fi
650	fi
651	fi
652	fi
653	else
654	if [[ $(echo $local_host \| cut -c1-4) = gaia ]]
655	then
656	ssh $local_user@gaiad "ssh $1 -l $remote_user \"mkdir -p $3\" "
657	else
658	ssh $1 -l $remote_user "mkdir -p $3"
659	fi
660	if [[ $? != 0 ]]
661	then
662	locat=ssh_failed_4; exit
663	fi
664	if [[ $(echo $local_host \| cut -c1-4) = gaia ]]
665	then
666	ssh $local_user@gaiad "cd $local_wdir; scp -p $2 $remote_user@$1:$catalog_name$4$zyklusnr" > /dev/null
667	else
668	scp -p $2 $remote_user@$1:$catalog_name$4$zyklusnr > /dev/null
669	fi
670	if [[ $? != 0 ]]
671	then
672	locat=scp_failed; exit
673	fi
674	fi
675
676	else
677
678	if [[ $catalog_copy = false ]]
679	then
680	if [[ $quote_wait = true ]]
681	then
682
683	printf " +++ quote wait not realized with BATCH_SCP"
684	locat=unavailable_feature; exit
685
686	else
687
688	if [[ $(echo $local_host \| cut -c1-4) = gaia ]]
689	then
690	ssh $local_user@gaiad "cd $local_wdir; scp -p $remote_user@$1:$catalog_name$4$zyklusnr $2" > /dev/null
691	else
692	scp -p $remote_user@$1:$catalog_name$4$zyklusnr $2 > /dev/null
693	fi
694	if [[ $? != 0 ]]
695	then
696	locat=scp_failed; exit
697	fi
698
699	fi
700	else
701
702	printf " +++ get of whole cataloges not realized with BATCH_SCP so far"
703	locat=unavailable_feature; exit
704
705	# ftp -i $1 << %END% > /dev/null
706	#$transfermode
707	#cd $3
708	#mget *
709	#quit
710	#%END%
711	fi
712	fi
713
714
715
716	# EVTL. TRANSFERIERTE DATEI AUF LOKALEM RECHNER LOESCHEN
717	if [[ $delete = true && $get = false ]]
718	then
719	rm -rf $2
720	fi
721
722
723
724	# ABSCHLUSSMELDUNG
725	if [[ $silent = false ]]
726	then
727	if (( maxcycle == 0 ))
728	then
729	if [[ $append = false ]]
730	then
731	printf " >>> transfer successful \n"
732	else
733	printf " >>> file was appended \n"
734	fi
735	else
736	printf " >>> transfer successful \n"
737	if [[ $append = false ]]
738	then
739	if [[ $catalog_copy = false ]]
740	then
741	printf " new file has cycle number $maxcycle \n"
742	else
743	printf " new catalog has cycle number $maxcycle \n"
744	fi
745	else
746	printf " append to cycle number $maxcycle \n"
747	fi
748	fi
749	fi
750
751	rm -rf $filelist $errfile

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format