Home

Context Navigation

batch_scp @ 17

Last change on this file since 17 was 1, checked in by raasch, 18 years ago
Initial repository layout and content
File size: 20.9 KB

Line
1	#! /bin/ksh
2	# batch_scp - Shellskript Version: @(#)batch_scp 1.0a 25/10/05
3
4	# Prozedur zum automatischen Transfer von Dateien mittels scp
5	#
6	# batch_scp hat 4 Argumente:
7	# $1 = IP-Adresse des Zielrechners
8	# $2 = zu uebertragende Datei
9	# $3 = Verzeichnis, in das kopiert werden soll
10	# $4 = Dateiname der Zieldatei
11
12
13	# ACHTUNG!!!!!!!!
14	#
15	# batch_scp hat noch folgenden grossen Mangel: wenn die Verzeichnisse
16	# auf den jeweiligen Remote-Rechnern aeltere Dateien beinhalten,
17	# die beim "ls -al" eine Jahreszahl und keine Uhrzeit (aa:bb) liefern,
18	# dann kann batch_scp die Dateinamen nicht ueberpruefen und findet
19	# z.B. bei -g die entsprechende Datei nicht!
20	#
21	#
22
23
24	# letzte Aenderung:
25	# 29/11/01 - Siggi - Entwicklungsbeginn
26	# 04/01/02 - Siggi - Version 1.0 funktionsfaehig
27	# 15/02/02 - Siggi - Verzeichnis-Listing umgestellt von "ls -al" auf "ls -1"
28	# 30/05/02 - Siggi - Abbruch mit exit 1 bei scp- oder ssh-Fehler
29	# 12/06/02 - Siggi - Version 1.0a, parent directories are also created, if
30	# directory on remote host does not exist
31	# 18/09/02 - Siggi - Fehlerabfragen korrigiert (waren wegen Klammerung
32	# unwirksam)
33	# 12/03/03 - Siggi - errfile and filelist are not stored in /tmp any more
34	# errors in execution of ssh does not lead
35	# to an abort on the NEC-system at DKRZ
36	# 01/04/03 - Siggi - small error concerning creation of catalogs removed
37	# 23/01/04 - Siggi - additional test output for scp on hurrikan
38	# 02/12/04 - Siggi - additional check of file size on remote host after scp.
39	# If the file sizes on local and remote host are equal,
40	# the scp exit status is ignored
41	# 03/12/04 - Siggi - additional checks of ssh actions independent of the
42	# ssh exit status
43	# 11/03/05 - Siggi - arguments are output in case of error exit
44	# 25/10/05 - Siggi - put of catalogs realized
45
46
47
48	# VARIABLENVEREINBARUNGEN + DEFAULTWERTE
49	random=$RANDOM
50
51	absolut=false
52	append=false
53	catalog_copy=false
54	check=false
55	delete=false
56	errfile=ftpcopy.errfile.$random
57	filelist=filelist.$random
58	get=false
59	local_host=`hostname`
60	locat=normal
61	make_catalog=false
62	overwrite=false
63	print_local_filename=false
64	quote_wait=false
65	remote_user=""
66	silent=false
67	transfermode=binary
68	zyklusnr=""
69	typeset -i iii icycle maxcycle=0 wait=0
70
71	# FEHLERBEHANDLUNG
72	# BEI EXIT:
73	trap 'if [[ $locat != normal ]]
74	then
75	cat $filelist $errfile
76	rm -rf $filelist $errfile
77	printf " +++ BATCH_SCP terminated \n"
78	printf " locat = $locat \n"
79	printf " arguments = $1 $2 $3 $4 \n\n"
80	exit 1
81	fi' exit
82
83
84	# BEI TERMINAL-BREAK:
85	trap 'rm -rf $filelist $errfile
86	printf " +++ BATCH_SCP terminated \n\n"
87	exit 1
88	' 2
89
90
91	# SHELLSCRIPT-OPTIONEN EINLESEN
92	while getopts :aAbcCdgmnoqsu:w: option
93	do
94	case $option in
95	(a) absolut=true;;
96	(A) append=true;;
97	(b) transfermode=binary;;
98	(c) catalog_copy=true;;
99	(C) check=true;;
100	(d) delete=true;;
101	(g) get=true;;
102	(m) make_catalog=true;;
103	(n) print_local_filename=true;; # Option ist nicht dokumentiert !
104	(o) overwrite=true;;
105	(q) quote_wait=true;;
106	(s) silent=true;;
107	(u) remote_user=$OPTARG;;
108	(w) wait=$OPTARG;;
109	(\?) printf " +++ option $OPTARG unknown \n"
110	printf " --> call: batch_scp [-aAbcCdgmnoqsuw] <IP-adress> <localfile> <remotepath> <remotefile>\n"
111	locat=parameter;exit;;
112	esac
113	done
114	shift OPTIND-1
115
116
117
118	# KURZE AUFRUFBESCHREIBUNG WIRD HIER AUSGEGEBEN
119	if [ "$1" = "?" ]
120	then
121	(printf "\n *** batch_scp can be called as follows:\n"
122	printf "\n batch_scp -a -b -d -g -o -q -s -u.. -w.. <param1> <param2> <param3> <param4>\n"
123	printf "\n Description of available options:\n"
124	printf "\n Option Description Default-Value"
125	printf "\n -a Filenames are absolute. No cycle- ---"
126	printf "\n numbers will be determined"
127	printf "\n -A append to destination file ---"
128	printf "\n -b use binary-modus for transfer ASCII-modus"
129	printf "\n -c transfer of directory ---"
130	printf "\n -C check-Modus, no transfer ---"
131	printf "\n -d file to be transferred will be ---"
132	printf "\n deleted after successful transfer"
133	printf "\n -g change of transfer direction, i.e. ---"
134	printf "\n file will be transferred from"
135	printf "\n destination host"
136	printf "\n -o any existing file will be overwritten ---"
137	printf "\n -q switch on \"quote wait\" on ---"
138	printf "\n estination host"
139	printf "\n -s do not display informative messages ---"
140	printf "\n -u username on remote machine <username>"
141	printf "\n -w waiting time in seconds, before trans- 0"
142	printf "\n fer will be initiated"
143	printf "\n "
144	printf "\n The positional parameters <param1> - <param4> must be provided at"
145	printf "\n any time and have the following meaning:"
146	printf "\n <param1> - IP-adress of destination host"
147	printf "\n or \"?\" (creates this outline)"
148	printf "\n <param2> - abs. or rel. path of file to be transferred"
149	printf "\n <param3> - directory (abs.!) on destination host. Special cahracters"
150	printf "\n like \~ are allowed but must be quoted by \"."
151	printf "\n <param4> - filename (without path!) on destination host; must not"
152	printf "\n be given, if option -c is used."
153	printf "\n When using option -g, file will be copied from destination host to file"
154	printf "\n <param2>. In this case, no overwriting is possible.") \| more
155	exit
156	fi
157
158
159	# PRUEFEN, OB ALLE ARGUMENTE VORLIEGEN
160	if [[ "$1" = "" ]]
161	then
162	printf " +++ 1. argument missing \n"
163	locat=argument; exit
164	elif [[ "$2" = "" ]]
165	then
166	printf " +++ 2. argument missing \n"
167	locat=argument; exit
168	elif [[ "$3" = "" ]]
169	then
170	printf " +++ 3. argument missing \n"
171	locat=argument; exit
172	elif [[ "$4" = "" ]]
173	then
174	printf " +++ 4. argument missing \n"
175	locat=argument; exit
176	fi
177
178
179	# USER-NAME AUF ZIELRECHNER AUS .NETRC-DATEI ERMITTELN
180	if [[ -z $remote_user ]]
181	then
182
183	# PRUEFEN, OB NETRC-DATEI VORHANDEN
184	if [[ ! -f ~/.netrc ]]
185	then
186	printf " +++ option -u not given; \n"
187	printf " getting remote-username from password file failed \n"
188	printf " because ~/.netrc does not exist \n"
189	locat=netrc; exit
190	fi
191	grep $1 ~/.netrc \| read dum dum dum remote_user dum dum
192	fi
193
194
195	# APPEND IST NUR BEI TRANSFER EINZELNER DATEIEN OHNE UEBERSCHREIBEN
196	# ERLAUBT. GET IST DABEI EBENFALLS NICHT ERLAUBT
197	if [[ $append = true && ( $get = true \|\| $catalog_copy = true \|\| $overwrite = true ) ]]
198	then
199	printf " +++ options -g, -c and -o are not allowed, if -A is given \n"
200	locat=parameter; exit
201	fi
202
203
204	# DATEINAME IM 4. ARGUMENT DARF NUR BEIM UEBERSCHREIBEN ODER IM ABSOLUT-
205	# MODUS PUNKTE ENTHALTEN
206	if [[ $overwrite = false && $absolut = false && $(echo $4 \| grep -c "\.") != 0 ]]
207	then
208	printf " +++ 4th argument may only contain dots (".") , if one of the \n"
209	printf " options -a or -o are given \n"
210	locat=argument; exit
211	fi
212
213
214	# QUOTE WAIT FUNKTIONIERT NICHT BEIM KOPIEREN GANZER VERZEICHNISSE
215	if [[ $quote_wait = true && $catalog_copy = true ]]
216	then
217	printf " +++ options -c and -q must not be used simultaneously\n"
218	locat=parameter; exit
219	fi
220
221
222	# IM CHECK-MODUS WIRD SCRIPT HIER BEENDET
223	[[ $check = true ]] && exit
224
225
226	# BESTIMMTE ZEIT WARTEN, BIS WEITERGEMACHT WIRD (NOETIG Z.B. BEI TRANSFER
227	# VON JOBPROTOKOLLEN AUS JOBS HERAUS)
228	sleep $wait
229
230
231	# PRUEFEN, OB LOKALE DATEI/LOKALES VERZEICHNIS VORHANDEN BZW. NICHT VORHANDEN
232	if [[ $get = false ]]
233	then
234	if [[ $catalog_copy = false ]]
235	then
236	if [[ ! -f $2 ]]
237	then
238	printf " +++ file \"$2\" to be transferred does not exist \n"
239	locat=localfile; exit
240	fi
241	else
242	if [[ ! -d $2 ]]
243	then
244	printf " +++ directory \"$2\" to be transferred does not exist\n"
245	printf " or is not a directory \n"
246	locat=localfile; exit
247	fi
248	fi
249	else
250	if [[ $catalog_copy = false ]]
251	then
252	if [[ -f $2 ]]
253	then
254	if [[ $overwrite = true ]]
255	then
256	rm $2
257	else
258	printf " +++ local file \"$2\" is already existing \n"
259	locat=localfile; exit
260	fi
261	else
262
263	# PRUEFEN, OB SICH LOKALE DATEI ANLEGEN LAESST
264	local_dirname=`dirname $2`
265	if [[ ! -d $local_dirname ]]
266	then
267	printf " +++ local directory \"$local_dirname\" \n"
268	printf " does not exist or is not a directory \n"
269	printf " +++ cannot copy file \"$3/$4\" \n"
270	printf " from \"$1\" to \"$local_host\" \n"
271	locat=localfile; exit
272	fi
273	fi
274	else
275	if [[ -d $2 \|\| -f $2 ]]
276	then
277	printf " +++ local directory \"$2\" is already existing, \n"
278	printf " or a file with the same name exists \n"
279	locat=localfile; exit
280	fi
281	fi
282	fi
283
284
285	# VERZEICHNISLSTE DES ZIELRECHNERS ERSTELLEN
286	ssh $1 -l $remote_user "cd $3; ls -1; echo '*** list complete'" > $filelist 2>&1
287	ssh_status=$?
288
289	if [[ $ssh_status != 0 ]]
290	then
291	if [[ ! -f $filelist ]]
292	then
293	echo " local_host = $local_host ssh_status = $ssh_status"
294	locat=ssh_failed_1; exit
295	else
296	if [[ $(grep -c "*** list complete" $filelist) = 0 ]]
297	then
298	echo " local_host = $local_host ssh_status = $ssh_status"
299	locat=ssh_failed_2; exit
300	fi
301	fi
302	fi
303
304
305	# PRUEFEN, OB VERZEICHNIS VORHANDEN IST. WENN GANZES VERZEICHNISS ZUM
306	# ZIELRECHNER KOPIERT WERDEN SOLL, DARF DORT NOCH KEIN ENTSPRECHENDES
307	# VERZEICHNIS VORHANDEN SEIN
308	if [[ $(cat $filelist \| grep -c "not found") != 0 \|\| \
309	$(cat $filelist \| grep -c "No such file or directory") != 0 ]]
310	then
311	if [[ ! ( $catalog_copy = true && $get = false ) ]]
312	then
313	if [[ $make_catalog = false ]]
314	then
315	printf " +++ directory \"$3\" does not exist on destination host (\"$1\") \n"
316	locat=directory; exit
317	else
318	if [[ $silent = false ]]
319	then
320	printf " >>> directory \"$3\" does not exist on destination host (\"$1\")"
321	printf "\n trying to create \"$3\" \n"
322	fi
323
324	make_catalog=force
325	fi
326	fi
327	fi
328
329
330	# PRUEFEN, OB DATEI/VERZEICHNIS VORHANDEN, WENN JA, HOECHSTEN ZYKLUS
331	# ERMITTELN (BZW. IM ABSOLUT-MODUS PRUEFEN, OB DATEI VORHANDEN IST)
332	# DAS GANZE ABER NUR, WENN NICHT OVERWRITE-MODUS GEWAEHLT WURDE, DIE
333	# EVENTUELL VORHANDENE DATEI ALSO UEBERSCHRIEBEN WERDEN SOLL
334	found=false
335	if [[ ( $overwrite = false && $get = false ) \|\| $get = true ]]
336	then
337	while read zeile
338	do
339	if [[ $absolut = false ]]
340	then
341	text=$(echo $zeile \| cut -f1 -d".")
342	if [[ "$text" = "$4" ]]
343	then
344	found=true
345	cycle=$(echo $zeile \| cut -f2 -d".")
346	if [[ "$cycle" = "$text" ]]
347	then
348	(( icycle = 0 ))
349	else
350
351	# PRUEFEN, OB CYCLE EINE ZAHL IST
352	(( iii = 1 ))
353	character=`echo $cycle \| cut -c$iii`
354	character_found=false
355	while [[ "$character" != "" && $character_found = false ]]
356	do
357	case $character in
358	(0\|1\|2\|3\|4\|5\|6\|7\|8\|9) true;;
359	(*) character_found=true
360	esac
361	(( iii = iii + 1 ))
362	character=`echo $cycle \| cut -c$iii`
363	done
364
365	if [[ $character_found = false ]]
366	then
367	(( icycle = $cycle ))
368	fi
369	fi >\|$errfile 2>&1 # AUSGABE FEHLER AUF ERRFILE WENN CYCLE NICHTNUMERISCH
370
371
372	# INFORMATIVE AUSGABE, WENN DATEI NICHTNUMERISCHE EXTENSION HAT
373	# if [[ $(cat $errfile \| grep -c "bad number") != 0 ]]
374	if [[ $character_found = true ]]
375	then
376	if [[ $cycle != "$5" ]]
377	then
378	printf " +++ file \"$text\" has non-numerical extension \".$cycle\" \n"
379	locat=file; exit
380	else
381	if [[ $silent = false ]]
382	then
383	printf " >>> file \"$text\" has non-numerical extension \".$cycle\" \n"
384	fi
385	fi
386	fi
387
388	if (( icycle > maxcycle ))
389	then
390	(( maxcycle = icycle ))
391	fi
392	fi
393
394	else
395
396	# IM ABSOLUT-MODUS MUSS NUR GEPRUEFT WERDEN, OB DIE DATEI
397	# VORHANDEN IST
398	[[ $4 = $zeile ]] && found=true
399	fi
400
401	done <$filelist
402	fi
403
404	if [[ $found = true ]]
405	then
406	if [[ $get = false ]]
407	then
408	if [[ $absolut = false ]]
409	then
410	if [[ $append = false ]]
411	then
412	(( maxcycle = maxcycle + 1 ))
413	zyklusnr=".$maxcycle"
414	else
415	if (( maxcycle == 0 ))
416	then
417	zyklusnr=""
418	else
419	zyklusnr=".$maxcycle"
420	fi
421	fi
422	else
423	if [[ $overwrite = false ]]
424	then
425	printf " +++ file \"$3/$4\" \n"
426	printf " already exists on destination host (use -o, if necessary) \n"
427	locat=file; exit
428	fi
429	fi
430	else
431	if [[ $absolut = false ]]
432	then
433	if (( maxcycle == 0 ))
434	then
435	zyklusnr=""
436	else
437	zyklusnr=".$maxcycle"
438	(( maxcycle = 0 ))
439	fi
440	else
441	zyklusnr=""
442	fi
443	fi
444	else
445	zyklusnr=""
446
447	# ABBRUCH, WENN DATEI VON ZIELRECHNER GEHOLT WERDEN SOLL, DORT ABER
448	# NICHT VORHANDEN IST
449	if [[ $get = true ]]
450	then
451	printf " +++ file \"$3/$4\" \n"
452	printf " does not exist on destination host (\"$1\") \n"
453	locat=remotefile; exit
454	fi
455	fi
456
457
458	# FALLS KATALOG ERZEUGT WIRD, DARF DIE DATEI IN KEINEM FALL EINE
459	# ZYKLUSNUMMER BESITZEN, DA SIE JA NOCh GARNICHT EXISTIEREN KANN
460	if [[ $make_catalog = force ]]
461	then
462	zyklusnr=""
463	(( maxcycle = 0 ))
464	fi
465
466
467	# FALLS NAMENSOPTION (-n) GEWAEHLT WURDE, NUR DEN ERMITTELTEN LOKALEN
468	# DATEINAMEN DES ZIELRECHNERS AUSGEBEN UND SCRIPT BEENDEN
469	if [[ $print_local_filename = true ]]
470	then
471	printf "$4$zyklusnr\n"
472	rm -r $filelist
473	exit
474	fi
475
476
477	# FALLS 5. ARGUMENT ANGEGEBEN WURDE, WIRD DIES ALS FILE-EXTENSION
478	# HINTER DIE ZYKLUS-NUMMER GEHAENGT (FUNKTIONIERT NUR BEI KOPIEREN EINER
479	# DATEI AUF ZIELRECHNER
480	if [[ "$5" != "" && $get = false ]]
481	then
482	zyklusnr=${zyklusnr}.$5
483	fi
484
485
486	# BEI VERZEICHNISTRANSFER VON ZIELRECHNER AUF LOKALEN RECHNER PRUEFEN, OB
487	# $3 AUF ZIELRECHNER WIRKLICH EIN VERZEICHNIS IST
488	if [[ $catalog_copy = true && $get = true ]]
489	then
490	rm -rf $filelist
491	ssh $1 -l $remote_user "cd $3" > $filelist
492	if [[ $? != 0 ]]
493	then
494	locat=ssh_failed_3; exit
495	fi
496
497	if [[ $(cat $filelist \| grep -c "Not a directory") != 0 ]]
498	then
499	printf " +++ \"$3\" on destination host is not a directory \n"
500	locat=directory; exit
501	fi
502	fi
503
504
505	# BEI KATALOGTRANSFER AUF LOKALEN RECHNER ENTSPRECHENDES VERZEICHNIS
506	# ANLEGEN
507	if [[ $catalog_copy = true ]]
508	then
509	if [[ $get = true ]]
510	then
511	mkdir $2
512	fi
513	fi
514
515
516	# Auf IBM-Rechnern (HLRN) Tilde aus Katalognamen entfernen, da scp
517	# diese nicht versteht
518	catalog_name=$3
519	if [[ $(hostname \| cut -c1-4) = hreg \|\| $(hostname \| cut -c1-4) = breg ]]
520	then
521	catalog_name=${catalog_name#"~/"}
522	catalog_name=${catalog_name#"~"}
523	fi
524	[[ "$catalog_name" != "" ]] && catalog_name=${catalog_name}/
525
526
527	# DATEI/VERZEICHNIS PER SCP UEBERTRAGEN
528	if [[ $get = false ]]
529	then
530	if [[ $make_catalog != force ]]
531	then
532	if [[ $append = false ]]
533	then
534	if [[ $(echo $local_host \| cut -c1-2) = cs ]]
535	then
536	if [[ $catalog_copy = false ]]
537	then
538	scp -q -v $2 $remote_user@$1:$catalog_name$4$zyklusnr
539	else
540	scp -r -q -v $2 $remote_user@$1:$catalog_name$4$zyklusnr
541	fi
542	else
543	if [[ $catalog_copy = false ]]
544	then
545	scp $2 $remote_user@$1:$catalog_name$4$zyklusnr > /dev/null
546	else
547	scp -r $2 $remote_user@$1:$catalog_name$4$zyklusnr > /dev/null
548	fi
549	fi
550	scp_status=$?
551
552	if [[ $scp_status != 0 ]]
553	then
554	# CHECK, OB DATEIGROESSEN AUF LOKALEM UND REMOTERECHNER
555	# UEBEREINSTIMMEN
556	local_size=`ls -al $2`
557	local_size=`echo $local_size \| cut -d" " -f5`
558
559	remote_size=`ssh $1 -l $remote_user "ls -al $catalog_name$4$zyklusnr"`
560	remote_size=`echo $remote_size \| cut -d" " -f5`
561
562	if [[ "$remote_size" != "$local_size" ]]
563	then
564	echo " +++ scp failed on host \"$local_host\" with exit $scp_status"
565	echo " local size = \"$local_size\" remote size = \"$remote_size\" "
566	date
567	locat=scp_failed; exit
568	fi
569	fi
570	else
571	scp $2 $remote_user@$1:${catalog_name}batch_scp_append_file.$random > /dev/null
572	if [[ $? != 0 ]]
573	then
574	# CHECK, OB DATEIGROESSEN AUF LOKALEM UND REMOTERECHNER
575	# UEBEREINSTIMMEN
576	local_size=`ls -al $2`
577	local_size=`echo $local_size \| cut -d" " -f5`
578
579	remote_size=`ssh $1 -l $remote_user "ls -al ${catalog_name}batch_scp_append_file.$random"`
580	remote_size=`echo $remote_size \| cut -d" " -f5`
581
582	if [[ "$remote_size" != "$local_size" ]]
583	then
584	echo " +++ scp failed on host \"$local_host\" with exit $scp_status"
585	echo " local size = \"$local_size\" remote size = \"$remote_size\" "
586	date
587	locat=scp_for_append_failed; exit
588	fi
589	fi
590
591	rm $filelist
592
593	ssh $1 -l $remote_user "cd $3; cat batch_scp_append_file.$random >> $4$zyklusnr; rm batch_scp_append_file.$random; echo '*** append complete'" > $filelist
594	if [[ $? != 0 ]]
595	then
596	if [[ ! -f $filelist ]]
597	then
598	locat=append_via_ssh_failed; exit
599	else
600	if [[ $(grep -c "*** append complete" $filelist) = 0 ]]
601	then
602	locat=append_via_ssh_failed; exit
603	fi
604	fi
605	fi
606	fi
607	else
608	ssh $1 -l $remote_user "mkdir -p $3"
609	if [[ $? != 0 ]]
610	then
611	locat=ssh_failed_4; exit
612	fi
613	scp $2 $remote_user@$1:$catalog_name$4$zyklusnr > /dev/null
614	if [[ $? != 0 ]]
615	then
616	locat=scp_failed; exit
617	fi
618	fi
619
620	else
621
622	if [[ $catalog_copy = false ]]
623	then
624	if [[ $quote_wait = true ]]
625	then
626
627	printf " +++ quote wait not realized with BATCH_SCP"
628	locat=unavailable_feature; exit
629
630	else
631
632	scp $remote_user@$1:$catalog_name$4$zyklusnr $2 > /dev/null
633	if [[ $? != 0 ]]
634	then
635	locat=scp_failed; exit
636	fi
637
638	fi
639	else
640
641	printf " +++ get of whole cataloges not realized with BATCH_SCP so far"
642	locat=unavailable_feature; exit
643
644	# ftp -i $1 << %END% > /dev/null
645	#$transfermode
646	#cd $3
647	#mget *
648	#quit
649	#%END%
650	fi
651	fi
652
653
654
655	# EVTL. TRANSFERIERTE DATEI AUF LOKALEM RECHNER LOESCHEN
656	if [[ $delete = true && $get = false ]]
657	then
658	rm -rf $2
659	fi
660
661
662
663	# ABSCHLUSSMELDUNG
664	if [[ $silent = false ]]
665	then
666	if (( maxcycle == 0 ))
667	then
668	if [[ $append = false ]]
669	then
670	printf " >>> transfer successful \n"
671	else
672	printf " >>> file was appended \n"
673	fi
674	else
675	printf " >>> transfer successful \n"
676	if [[ $append = false ]]
677	then
678	if [[ $catalog_copy = false ]]
679	then
680	printf " new file has cycle number $maxcycle \n"
681	else
682	printf " new catalog has cycle number $maxcycle \n"
683	fi
684	else
685	printf " append to cycle number $maxcycle \n"
686	fi
687	fi
688	fi
689
690	rm -rf $filelist $errfile

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format