Home

Context Navigation

batch_scp @ 969

Last change on this file since 969 was 693, checked in by raasch, 14 years ago

New:
---
adjustments for ibmkisti (pres, batch_scp, mbuild, mrun, subjob)

new default configuration files .mrun.config.yonsei2011 and .config_block_for_ibmkisti

Changed:

Errors:

bugfix: weighting coefficient added to ibm branch (pres)

Property svn:keywords set to Id

File size: 23.6 KB

Rev	Line
[1]	1	#! /bin/ksh
	2	# batch_scp - Shellskript Version: @(#)batch_scp 1.0a 25/10/05
[169]	3	# $Id: batch_scp 693 2011-03-08 08:27:49Z heinze $
[1]	4
	5	# Prozedur zum automatischen Transfer von Dateien mittels scp
	6	#
	7	# batch_scp hat 4 Argumente:
	8	# $1 = IP-Adresse des Zielrechners
	9	# $2 = zu uebertragende Datei
	10	# $3 = Verzeichnis, in das kopiert werden soll
	11	# $4 = Dateiname der Zieldatei
	12
	13
	14	# ACHTUNG!!!!!!!!
	15	#
	16	# batch_scp hat noch folgenden grossen Mangel: wenn die Verzeichnisse
	17	# auf den jeweiligen Remote-Rechnern aeltere Dateien beinhalten,
	18	# die beim "ls -al" eine Jahreszahl und keine Uhrzeit (aa:bb) liefern,
	19	# dann kann batch_scp die Dateinamen nicht ueberpruefen und findet
	20	# z.B. bei -g die entsprechende Datei nicht!
	21	#
	22	#
	23
	24
	25	# letzte Aenderung:
	26	# 29/11/01 - Siggi - Entwicklungsbeginn
	27	# 04/01/02 - Siggi - Version 1.0 funktionsfaehig
	28	# 15/02/02 - Siggi - Verzeichnis-Listing umgestellt von "ls -al" auf "ls -1"
	29	# 30/05/02 - Siggi - Abbruch mit exit 1 bei scp- oder ssh-Fehler
	30	# 12/06/02 - Siggi - Version 1.0a, parent directories are also created, if
	31	# directory on remote host does not exist
	32	# 18/09/02 - Siggi - Fehlerabfragen korrigiert (waren wegen Klammerung
	33	# unwirksam)
	34	# 12/03/03 - Siggi - errfile and filelist are not stored in /tmp any more
	35	# errors in execution of ssh does not lead
	36	# to an abort on the NEC-system at DKRZ
	37	# 01/04/03 - Siggi - small error concerning creation of catalogs removed
	38	# 23/01/04 - Siggi - additional test output for scp on hurrikan
	39	# 02/12/04 - Siggi - additional check of file size on remote host after scp.
	40	# If the file sizes on local and remote host are equal,
	41	# the scp exit status is ignored
	42	# 03/12/04 - Siggi - additional checks of ssh actions independent of the
	43	# ssh exit status
	44	# 11/03/05 - Siggi - arguments are output in case of error exit
	45	# 25/10/05 - Siggi - put of catalogs realized
[306]	46	# 27/04/09 - Marcus- use option -p for all scp calls
[693]	47	# 08/03/11 - Siggi - adjustments for ibmkisti: this machine allows
	48	# outgoing ssh/scp connections only from the
	49	# interactive nodes (gaiad). All ssh/scp traffic is
	50	# done via this interactive node.
[1]	51
	52
	53
	54	# VARIABLENVEREINBARUNGEN + DEFAULTWERTE
	55	random=$RANDOM
	56
	57	absolut=false
	58	append=false
	59	catalog_copy=false
	60	check=false
	61	delete=false
	62	errfile=ftpcopy.errfile.$random
	63	filelist=filelist.$random
	64	get=false
	65	local_host=`hostname`
[693]	66	local_user=$USER
	67	local_wdir=`pwd`
[1]	68	locat=normal
	69	make_catalog=false
	70	overwrite=false
	71	print_local_filename=false
	72	quote_wait=false
	73	remote_user=""
	74	silent=false
	75	transfermode=binary
	76	zyklusnr=""
	77	typeset -i iii icycle maxcycle=0 wait=0
	78
	79	# FEHLERBEHANDLUNG
	80	# BEI EXIT:
	81	trap 'if [[ $locat != normal ]]
	82	then
	83	cat $filelist $errfile
	84	rm -rf $filelist $errfile
	85	printf " +++ BATCH_SCP terminated \n"
	86	printf " locat = $locat \n"
	87	printf " arguments = $1 $2 $3 $4 \n\n"
	88	exit 1
	89	fi' exit
	90
	91
	92	# BEI TERMINAL-BREAK:
	93	trap 'rm -rf $filelist $errfile
	94	printf " +++ BATCH_SCP terminated \n\n"
	95	exit 1
	96	' 2
	97
	98
	99	# SHELLSCRIPT-OPTIONEN EINLESEN
	100	while getopts :aAbcCdgmnoqsu:w: option
	101	do
	102	case $option in
	103	(a) absolut=true;;
	104	(A) append=true;;
	105	(b) transfermode=binary;;
	106	(c) catalog_copy=true;;
	107	(C) check=true;;
	108	(d) delete=true;;
	109	(g) get=true;;
	110	(m) make_catalog=true;;
	111	(n) print_local_filename=true;; # Option ist nicht dokumentiert !
	112	(o) overwrite=true;;
	113	(q) quote_wait=true;;
	114	(s) silent=true;;
	115	(u) remote_user=$OPTARG;;
	116	(w) wait=$OPTARG;;
	117	(\?) printf " +++ option $OPTARG unknown \n"
	118	printf " --> call: batch_scp [-aAbcCdgmnoqsuw] <IP-adress> <localfile> <remotepath> <remotefile>\n"
	119	locat=parameter;exit;;
	120	esac
	121	done
	122	shift OPTIND-1
	123
	124
	125
	126	# KURZE AUFRUFBESCHREIBUNG WIRD HIER AUSGEGEBEN
	127	if [ "$1" = "?" ]
	128	then
	129	(printf "\n *** batch_scp can be called as follows:\n"
	130	printf "\n batch_scp -a -b -d -g -o -q -s -u.. -w.. <param1> <param2> <param3> <param4>\n"
	131	printf "\n Description of available options:\n"
	132	printf "\n Option Description Default-Value"
	133	printf "\n -a Filenames are absolute. No cycle- ---"
	134	printf "\n numbers will be determined"
	135	printf "\n -A append to destination file ---"
	136	printf "\n -b use binary-modus for transfer ASCII-modus"
	137	printf "\n -c transfer of directory ---"
	138	printf "\n -C check-Modus, no transfer ---"
	139	printf "\n -d file to be transferred will be ---"
	140	printf "\n deleted after successful transfer"
	141	printf "\n -g change of transfer direction, i.e. ---"
	142	printf "\n file will be transferred from"
	143	printf "\n destination host"
	144	printf "\n -o any existing file will be overwritten ---"
	145	printf "\n -q switch on \"quote wait\" on ---"
	146	printf "\n estination host"
	147	printf "\n -s do not display informative messages ---"
	148	printf "\n -u username on remote machine <username>"
	149	printf "\n -w waiting time in seconds, before trans- 0"
	150	printf "\n fer will be initiated"
	151	printf "\n "
	152	printf "\n The positional parameters <param1> - <param4> must be provided at"
	153	printf "\n any time and have the following meaning:"
	154	printf "\n <param1> - IP-adress of destination host"
	155	printf "\n or \"?\" (creates this outline)"
	156	printf "\n <param2> - abs. or rel. path of file to be transferred"
	157	printf "\n <param3> - directory (abs.!) on destination host. Special cahracters"
	158	printf "\n like \~ are allowed but must be quoted by \"."
	159	printf "\n <param4> - filename (without path!) on destination host; must not"
	160	printf "\n be given, if option -c is used."
	161	printf "\n When using option -g, file will be copied from destination host to file"
	162	printf "\n <param2>. In this case, no overwriting is possible.") \| more
	163	exit
	164	fi
	165
	166
	167	# PRUEFEN, OB ALLE ARGUMENTE VORLIEGEN
	168	if [[ "$1" = "" ]]
	169	then
	170	printf " +++ 1. argument missing \n"
	171	locat=argument; exit
	172	elif [[ "$2" = "" ]]
	173	then
	174	printf " +++ 2. argument missing \n"
	175	locat=argument; exit
	176	elif [[ "$3" = "" ]]
	177	then
	178	printf " +++ 3. argument missing \n"
	179	locat=argument; exit
	180	elif [[ "$4" = "" ]]
	181	then
	182	printf " +++ 4. argument missing \n"
	183	locat=argument; exit
	184	fi
	185
	186
	187	# USER-NAME AUF ZIELRECHNER AUS .NETRC-DATEI ERMITTELN
	188	if [[ -z $remote_user ]]
	189	then
	190
	191	# PRUEFEN, OB NETRC-DATEI VORHANDEN
	192	if [[ ! -f ~/.netrc ]]
	193	then
	194	printf " +++ option -u not given; \n"
	195	printf " getting remote-username from password file failed \n"
	196	printf " because ~/.netrc does not exist \n"
	197	locat=netrc; exit
	198	fi
	199	grep $1 ~/.netrc \| read dum dum dum remote_user dum dum
	200	fi
	201
	202
	203	# APPEND IST NUR BEI TRANSFER EINZELNER DATEIEN OHNE UEBERSCHREIBEN
	204	# ERLAUBT. GET IST DABEI EBENFALLS NICHT ERLAUBT
	205	if [[ $append = true && ( $get = true \|\| $catalog_copy = true \|\| $overwrite = true ) ]]
	206	then
	207	printf " +++ options -g, -c and -o are not allowed, if -A is given \n"
	208	locat=parameter; exit
	209	fi
	210
	211
	212	# DATEINAME IM 4. ARGUMENT DARF NUR BEIM UEBERSCHREIBEN ODER IM ABSOLUT-
	213	# MODUS PUNKTE ENTHALTEN
	214	if [[ $overwrite = false && $absolut = false && $(echo $4 \| grep -c "\.") != 0 ]]
	215	then
	216	printf " +++ 4th argument may only contain dots (".") , if one of the \n"
	217	printf " options -a or -o are given \n"
	218	locat=argument; exit
	219	fi
	220
	221
	222	# QUOTE WAIT FUNKTIONIERT NICHT BEIM KOPIEREN GANZER VERZEICHNISSE
	223	if [[ $quote_wait = true && $catalog_copy = true ]]
	224	then
	225	printf " +++ options -c and -q must not be used simultaneously\n"
	226	locat=parameter; exit
	227	fi
	228
	229
	230	# IM CHECK-MODUS WIRD SCRIPT HIER BEENDET
	231	[[ $check = true ]] && exit
	232
	233
	234	# BESTIMMTE ZEIT WARTEN, BIS WEITERGEMACHT WIRD (NOETIG Z.B. BEI TRANSFER
	235	# VON JOBPROTOKOLLEN AUS JOBS HERAUS)
	236	sleep $wait
	237
	238
	239	# PRUEFEN, OB LOKALE DATEI/LOKALES VERZEICHNIS VORHANDEN BZW. NICHT VORHANDEN
	240	if [[ $get = false ]]
	241	then
	242	if [[ $catalog_copy = false ]]
	243	then
	244	if [[ ! -f $2 ]]
	245	then
	246	printf " +++ file \"$2\" to be transferred does not exist \n"
	247	locat=localfile; exit
	248	fi
	249	else
	250	if [[ ! -d $2 ]]
	251	then
	252	printf " +++ directory \"$2\" to be transferred does not exist\n"
	253	printf " or is not a directory \n"
	254	locat=localfile; exit
	255	fi
	256	fi
	257	else
	258	if [[ $catalog_copy = false ]]
	259	then
	260	if [[ -f $2 ]]
	261	then
	262	if [[ $overwrite = true ]]
	263	then
	264	rm $2
	265	else
	266	printf " +++ local file \"$2\" is already existing \n"
	267	locat=localfile; exit
	268	fi
	269	else
	270
	271	# PRUEFEN, OB SICH LOKALE DATEI ANLEGEN LAESST
	272	local_dirname=`dirname $2`
	273	if [[ ! -d $local_dirname ]]
	274	then
	275	printf " +++ local directory \"$local_dirname\" \n"
	276	printf " does not exist or is not a directory \n"
	277	printf " +++ cannot copy file \"$3/$4\" \n"
	278	printf " from \"$1\" to \"$local_host\" \n"
	279	locat=localfile; exit
	280	fi
	281	fi
	282	else
	283	if [[ -d $2 \|\| -f $2 ]]
	284	then
	285	printf " +++ local directory \"$2\" is already existing, \n"
	286	printf " or a file with the same name exists \n"
	287	locat=localfile; exit
	288	fi
	289	fi
	290	fi
	291
	292
	293	# VERZEICHNISLSTE DES ZIELRECHNERS ERSTELLEN
[693]	294	if [[ $(echo $local_host \| cut -c1-4) = gaia ]]
	295	then
	296	ssh $local_user@gaiad "ssh $1 -l $remote_user \"cd $3; ls -1; echo '*** list complete'\" " > $filelist 2>&1
	297	else
	298	ssh $1 -l $remote_user "cd $3; ls -1; echo '*** list complete'" > $filelist 2>&1
	299	fi
[1]	300	ssh_status=$?
	301
	302	if [[ $ssh_status != 0 ]]
	303	then
	304	if [[ ! -f $filelist ]]
	305	then
	306	echo " local_host = $local_host ssh_status = $ssh_status"
	307	locat=ssh_failed_1; exit
	308	else
	309	if [[ $(grep -c "*** list complete" $filelist) = 0 ]]
	310	then
	311	echo " local_host = $local_host ssh_status = $ssh_status"
	312	locat=ssh_failed_2; exit
	313	fi
	314	fi
	315	fi
	316
	317
	318	# PRUEFEN, OB VERZEICHNIS VORHANDEN IST. WENN GANZES VERZEICHNISS ZUM
	319	# ZIELRECHNER KOPIERT WERDEN SOLL, DARF DORT NOCH KEIN ENTSPRECHENDES
	320	# VERZEICHNIS VORHANDEN SEIN
	321	if [[ $(cat $filelist \| grep -c "not found") != 0 \|\| \
	322	$(cat $filelist \| grep -c "No such file or directory") != 0 ]]
	323	then
	324	if [[ ! ( $catalog_copy = true && $get = false ) ]]
	325	then
	326	if [[ $make_catalog = false ]]
	327	then
	328	printf " +++ directory \"$3\" does not exist on destination host (\"$1\") \n"
	329	locat=directory; exit
	330	else
	331	if [[ $silent = false ]]
	332	then
	333	printf " >>> directory \"$3\" does not exist on destination host (\"$1\")"
	334	printf "\n trying to create \"$3\" \n"
	335	fi
	336
	337	make_catalog=force
	338	fi
	339	fi
	340	fi
	341
	342
	343	# PRUEFEN, OB DATEI/VERZEICHNIS VORHANDEN, WENN JA, HOECHSTEN ZYKLUS
	344	# ERMITTELN (BZW. IM ABSOLUT-MODUS PRUEFEN, OB DATEI VORHANDEN IST)
	345	# DAS GANZE ABER NUR, WENN NICHT OVERWRITE-MODUS GEWAEHLT WURDE, DIE
	346	# EVENTUELL VORHANDENE DATEI ALSO UEBERSCHRIEBEN WERDEN SOLL
	347	found=false
	348	if [[ ( $overwrite = false && $get = false ) \|\| $get = true ]]
	349	then
	350	while read zeile
	351	do
	352	if [[ $absolut = false ]]
	353	then
	354	text=$(echo $zeile \| cut -f1 -d".")
	355	if [[ "$text" = "$4" ]]
	356	then
	357	found=true
	358	cycle=$(echo $zeile \| cut -f2 -d".")
	359	if [[ "$cycle" = "$text" ]]
	360	then
	361	(( icycle = 0 ))
	362	else
	363
	364	# PRUEFEN, OB CYCLE EINE ZAHL IST
	365	(( iii = 1 ))
	366	character=`echo $cycle \| cut -c$iii`
	367	character_found=false
	368	while [[ "$character" != "" && $character_found = false ]]
	369	do
	370	case $character in
	371	(0\|1\|2\|3\|4\|5\|6\|7\|8\|9) true;;
	372	(*) character_found=true
	373	esac
	374	(( iii = iii + 1 ))
	375	character=`echo $cycle \| cut -c$iii`
	376	done
	377
	378	if [[ $character_found = false ]]
	379	then
	380	(( icycle = $cycle ))
	381	fi
	382	fi >\|$errfile 2>&1 # AUSGABE FEHLER AUF ERRFILE WENN CYCLE NICHTNUMERISCH
	383
	384
	385	# INFORMATIVE AUSGABE, WENN DATEI NICHTNUMERISCHE EXTENSION HAT
	386	# if [[ $(cat $errfile \| grep -c "bad number") != 0 ]]
	387	if [[ $character_found = true ]]
	388	then
	389	if [[ $cycle != "$5" ]]
	390	then
	391	printf " +++ file \"$text\" has non-numerical extension \".$cycle\" \n"
	392	locat=file; exit
	393	else
	394	if [[ $silent = false ]]
	395	then
	396	printf " >>> file \"$text\" has non-numerical extension \".$cycle\" \n"
	397	fi
	398	fi
	399	fi
	400
	401	if (( icycle > maxcycle ))
	402	then
	403	(( maxcycle = icycle ))
	404	fi
	405	fi
	406
	407	else
	408
	409	# IM ABSOLUT-MODUS MUSS NUR GEPRUEFT WERDEN, OB DIE DATEI
	410	# VORHANDEN IST
	411	[[ $4 = $zeile ]] && found=true
	412	fi
	413
	414	done <$filelist
	415	fi
	416
	417	if [[ $found = true ]]
	418	then
	419	if [[ $get = false ]]
	420	then
	421	if [[ $absolut = false ]]
	422	then
	423	if [[ $append = false ]]
	424	then
	425	(( maxcycle = maxcycle + 1 ))
	426	zyklusnr=".$maxcycle"
	427	else
	428	if (( maxcycle == 0 ))
	429	then
	430	zyklusnr=""
	431	else
	432	zyklusnr=".$maxcycle"
	433	fi
	434	fi
	435	else
	436	if [[ $overwrite = false ]]
	437	then
	438	printf " +++ file \"$3/$4\" \n"
	439	printf " already exists on destination host (use -o, if necessary) \n"
	440	locat=file; exit
	441	fi
	442	fi
	443	else
	444	if [[ $absolut = false ]]
	445	then
	446	if (( maxcycle == 0 ))
	447	then
	448	zyklusnr=""
	449	else
	450	zyklusnr=".$maxcycle"
	451	(( maxcycle = 0 ))
	452	fi
	453	else
	454	zyklusnr=""
	455	fi
	456	fi
	457	else
	458	zyklusnr=""
	459
	460	# ABBRUCH, WENN DATEI VON ZIELRECHNER GEHOLT WERDEN SOLL, DORT ABER
	461	# NICHT VORHANDEN IST
	462	if [[ $get = true ]]
	463	then
	464	printf " +++ file \"$3/$4\" \n"
	465	printf " does not exist on destination host (\"$1\") \n"
	466	locat=remotefile; exit
	467	fi
	468	fi
	469
	470
	471	# FALLS KATALOG ERZEUGT WIRD, DARF DIE DATEI IN KEINEM FALL EINE
	472	# ZYKLUSNUMMER BESITZEN, DA SIE JA NOCh GARNICHT EXISTIEREN KANN
	473	if [[ $make_catalog = force ]]
	474	then
	475	zyklusnr=""
	476	(( maxcycle = 0 ))
	477	fi
	478
	479
	480	# FALLS NAMENSOPTION (-n) GEWAEHLT WURDE, NUR DEN ERMITTELTEN LOKALEN
	481	# DATEINAMEN DES ZIELRECHNERS AUSGEBEN UND SCRIPT BEENDEN
	482	if [[ $print_local_filename = true ]]
	483	then
	484	printf "$4$zyklusnr\n"
	485	rm -r $filelist
	486	exit
	487	fi
	488
	489
	490	# FALLS 5. ARGUMENT ANGEGEBEN WURDE, WIRD DIES ALS FILE-EXTENSION
	491	# HINTER DIE ZYKLUS-NUMMER GEHAENGT (FUNKTIONIERT NUR BEI KOPIEREN EINER
	492	# DATEI AUF ZIELRECHNER
	493	if [[ "$5" != "" && $get = false ]]
	494	then
	495	zyklusnr=${zyklusnr}.$5
	496	fi
	497
	498
	499	# BEI VERZEICHNISTRANSFER VON ZIELRECHNER AUF LOKALEN RECHNER PRUEFEN, OB
	500	# $3 AUF ZIELRECHNER WIRKLICH EIN VERZEICHNIS IST
	501	if [[ $catalog_copy = true && $get = true ]]
	502	then
	503	rm -rf $filelist
[693]	504	if [[ $(echo $local_host \| cut -c1-4) = gaia ]]
	505	then
	506	ssh $local_user@gaiad "ssh $1 -l $remote_user \"cd $3\" " > $filelist
	507	else
	508	ssh $1 -l $remote_user "cd $3" > $filelist
	509	fi
[1]	510	if [[ $? != 0 ]]
	511	then
	512	locat=ssh_failed_3; exit
	513	fi
	514
	515	if [[ $(cat $filelist \| grep -c "Not a directory") != 0 ]]
	516	then
	517	printf " +++ \"$3\" on destination host is not a directory \n"
	518	locat=directory; exit
	519	fi
	520	fi
	521
	522
	523	# BEI KATALOGTRANSFER AUF LOKALEN RECHNER ENTSPRECHENDES VERZEICHNIS
	524	# ANLEGEN
	525	if [[ $catalog_copy = true ]]
	526	then
	527	if [[ $get = true ]]
	528	then
	529	mkdir $2
	530	fi
	531	fi
	532
	533
	534	# Auf IBM-Rechnern (HLRN) Tilde aus Katalognamen entfernen, da scp
	535	# diese nicht versteht
	536	catalog_name=$3
	537	if [[ $(hostname \| cut -c1-4) = hreg \|\| $(hostname \| cut -c1-4) = breg ]]
	538	then
	539	catalog_name=${catalog_name#"~/"}
	540	catalog_name=${catalog_name#"~"}
	541	fi
	542	[[ "$catalog_name" != "" ]] && catalog_name=${catalog_name}/
	543
	544
	545	# DATEI/VERZEICHNIS PER SCP UEBERTRAGEN
	546	if [[ $get = false ]]
	547	then
	548	if [[ $make_catalog != force ]]
	549	then
	550	if [[ $append = false ]]
	551	then
	552	if [[ $(echo $local_host \| cut -c1-2) = cs ]]
	553	then
	554	if [[ $catalog_copy = false ]]
	555	then
[306]	556	scp -p -q -v $2 $remote_user@$1:$catalog_name$4$zyklusnr
[1]	557	else
[306]	558	scp -p -r -q -v $2 $remote_user@$1:$catalog_name$4$zyklusnr
[1]	559	fi
[693]	560	elif [[ $(echo $local_host \| cut -c1-4) = gaia ]]
	561	then
	562	if [[ $catalog_copy = false ]]
	563	then
	564	ssh $local_user@gaiad "cd $local_wdir; scp -p $2 $remote_user@$1:$catalog_name$4$zyklusnr" > /dev/null
	565	else
	566	ssh $local_user@gaiad "cd $local_wdir; scp -p -r $2 $remote_user@$1:$catalog_name$4$zyklusnr" > /dev/null
	567	fi
[1]	568	else
	569	if [[ $catalog_copy = false ]]
	570	then
[306]	571	scp -p $2 $remote_user@$1:$catalog_name$4$zyklusnr > /dev/null
[1]	572	else
[306]	573	scp -p -r $2 $remote_user@$1:$catalog_name$4$zyklusnr > /dev/null
[1]	574	fi
	575	fi
	576	scp_status=$?
	577
	578	if [[ $scp_status != 0 ]]
	579	then
	580	# CHECK, OB DATEIGROESSEN AUF LOKALEM UND REMOTERECHNER
	581	# UEBEREINSTIMMEN
	582	local_size=`ls -al $2`
	583	local_size=`echo $local_size \| cut -d" " -f5`
	584
[693]	585	if [[ $(echo $local_host \| cut -c1-4) = gaia ]]
	586	then
	587	remote_size=`ssh $local_user@gaiad "ssh $1 -l $remote_user \"ls -al $catalog_name$4$zyklusnr\" "`
	588	else
	589	remote_size=`ssh $1 -l $remote_user "ls -al $catalog_name$4$zyklusnr"`
	590	fi
[1]	591	remote_size=`echo $remote_size \| cut -d" " -f5`
	592
	593	if [[ "$remote_size" != "$local_size" ]]
	594	then
	595	echo " +++ scp failed on host \"$local_host\" with exit $scp_status"
	596	echo " local size = \"$local_size\" remote size = \"$remote_size\" "
	597	date
	598	locat=scp_failed; exit
	599	fi
	600	fi
	601	else
[693]	602	if [[ $(echo $local_host \| cut -c1-4) = gaia ]]
	603	then
	604	ssh $local_user@gaiad "cd $local_wdir; scp -p $2 $remote_user@$1:${catalog_name}batch_scp_append_file.$random" > /dev/null
	605	else
	606	scp -p $2 $remote_user@$1:${catalog_name}batch_scp_append_file.$random > /dev/null
	607	fi
[1]	608	if [[ $? != 0 ]]
	609	then
	610	# CHECK, OB DATEIGROESSEN AUF LOKALEM UND REMOTERECHNER
	611	# UEBEREINSTIMMEN
	612	local_size=`ls -al $2`
	613	local_size=`echo $local_size \| cut -d" " -f5`
	614
[693]	615	if [[ $(echo $local_host \| cut -c1-4) = gaia ]]
	616	then
	617	remote_size=`ssh $local_user@gaiad "ssh $1 -l $remote_user \"ls -al ${catalog_name}batch_scp_append_file.$random\" "`
	618	else
	619	remote_size=`ssh $1 -l $remote_user "ls -al ${catalog_name}batch_scp_append_file.$random"`
	620	fi
[1]	621	remote_size=`echo $remote_size \| cut -d" " -f5`
	622
	623	if [[ "$remote_size" != "$local_size" ]]
	624	then
	625	echo " +++ scp failed on host \"$local_host\" with exit $scp_status"
	626	echo " local size = \"$local_size\" remote size = \"$remote_size\" "
	627	date
	628	locat=scp_for_append_failed; exit
	629	fi
	630	fi
	631
	632	rm $filelist
	633
[693]	634	if [[ $(echo $local_host \| cut -c1-4) = gaia ]]
	635	then
	636	ssh $local_user@gaiad "ssh $1 -l $remote_user \"cd $3; cat batch_scp_append_file.$random >> $4$zyklusnr; rm batch_scp_append_file.$random; echo '*** append complete'\" " > $filelist
	637	else
	638	ssh $1 -l $remote_user "cd $3; cat batch_scp_append_file.$random >> $4$zyklusnr; rm batch_scp_append_file.$random; echo '*** append complete'" > $filelist
	639	fi
[1]	640	if [[ $? != 0 ]]
	641	then
	642	if [[ ! -f $filelist ]]
	643	then
	644	locat=append_via_ssh_failed; exit
	645	else
	646	if [[ $(grep -c "*** append complete" $filelist) = 0 ]]
	647	then
	648	locat=append_via_ssh_failed; exit
	649	fi
	650	fi
	651	fi
	652	fi
	653	else
[693]	654	if [[ $(echo $local_host \| cut -c1-4) = gaia ]]
	655	then
	656	ssh $local_user@gaiad "ssh $1 -l $remote_user \"mkdir -p $3\" "
	657	else
	658	ssh $1 -l $remote_user "mkdir -p $3"
	659	fi
[1]	660	if [[ $? != 0 ]]
	661	then
	662	locat=ssh_failed_4; exit
	663	fi
[693]	664	if [[ $(echo $local_host \| cut -c1-4) = gaia ]]
	665	then
	666	ssh $local_user@gaiad "cd $local_wdir; scp -p $2 $remote_user@$1:$catalog_name$4$zyklusnr" > /dev/null
	667	else
	668	scp -p $2 $remote_user@$1:$catalog_name$4$zyklusnr > /dev/null
	669	fi
[1]	670	if [[ $? != 0 ]]
	671	then
	672	locat=scp_failed; exit
	673	fi
	674	fi
	675
	676	else
	677
	678	if [[ $catalog_copy = false ]]
	679	then
	680	if [[ $quote_wait = true ]]
	681	then
	682
	683	printf " +++ quote wait not realized with BATCH_SCP"
	684	locat=unavailable_feature; exit
	685
	686	else
	687
[693]	688	if [[ $(echo $local_host \| cut -c1-4) = gaia ]]
	689	then
	690	ssh $local_user@gaiad "cd $local_wdir; scp -p $remote_user@$1:$catalog_name$4$zyklusnr $2" > /dev/null
	691	else
	692	scp -p $remote_user@$1:$catalog_name$4$zyklusnr $2 > /dev/null
	693	fi
[1]	694	if [[ $? != 0 ]]
	695	then
	696	locat=scp_failed; exit
	697	fi
	698
	699	fi
	700	else
	701
	702	printf " +++ get of whole cataloges not realized with BATCH_SCP so far"
	703	locat=unavailable_feature; exit
	704
	705	# ftp -i $1 << %END% > /dev/null
	706	#$transfermode
	707	#cd $3
	708	#mget *
	709	#quit
	710	#%END%
	711	fi
	712	fi
	713
	714
	715
	716	# EVTL. TRANSFERIERTE DATEI AUF LOKALEM RECHNER LOESCHEN
	717	if [[ $delete = true && $get = false ]]
	718	then
	719	rm -rf $2
	720	fi
	721
	722
	723
	724	# ABSCHLUSSMELDUNG
	725	if [[ $silent = false ]]
	726	then
	727	if (( maxcycle == 0 ))
	728	then
	729	if [[ $append = false ]]
	730	then
	731	printf " >>> transfer successful \n"
	732	else
	733	printf " >>> file was appended \n"
	734	fi
	735	else
	736	printf " >>> transfer successful \n"
	737	if [[ $append = false ]]
	738	then
	739	if [[ $catalog_copy = false ]]
	740	then
	741	printf " new file has cycle number $maxcycle \n"
	742	else
	743	printf " new catalog has cycle number $maxcycle \n"
	744	fi
	745	else
	746	printf " append to cycle number $maxcycle \n"
	747	fi
	748	fi
	749	fi
	750
	751	rm -rf $filelist $errfile

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format