Home

Context Navigation

batch_scp @ 402

Last change on this file since 402 was 306, checked in by letzel, 16 years ago
Typographical error (mrun) Use option -p for all scp calls (batch_scp) Modified output format (header)
Property svn:keywords set to `Id`
File size: 21.0 KB

Rev	Line
[1]	1	#! /bin/ksh
	2	# batch_scp - Shellskript Version: @(#)batch_scp 1.0a 25/10/05
[169]	3	# $Id: batch_scp 306 2009-04-27 14:11:40Z maronga $
[1]	4
	5	# Prozedur zum automatischen Transfer von Dateien mittels scp
	6	#
	7	# batch_scp hat 4 Argumente:
	8	# $1 = IP-Adresse des Zielrechners
	9	# $2 = zu uebertragende Datei
	10	# $3 = Verzeichnis, in das kopiert werden soll
	11	# $4 = Dateiname der Zieldatei
	12
	13
	14	# ACHTUNG!!!!!!!!
	15	#
	16	# batch_scp hat noch folgenden grossen Mangel: wenn die Verzeichnisse
	17	# auf den jeweiligen Remote-Rechnern aeltere Dateien beinhalten,
	18	# die beim "ls -al" eine Jahreszahl und keine Uhrzeit (aa:bb) liefern,
	19	# dann kann batch_scp die Dateinamen nicht ueberpruefen und findet
	20	# z.B. bei -g die entsprechende Datei nicht!
	21	#
	22	#
	23
	24
	25	# letzte Aenderung:
	26	# 29/11/01 - Siggi - Entwicklungsbeginn
	27	# 04/01/02 - Siggi - Version 1.0 funktionsfaehig
	28	# 15/02/02 - Siggi - Verzeichnis-Listing umgestellt von "ls -al" auf "ls -1"
	29	# 30/05/02 - Siggi - Abbruch mit exit 1 bei scp- oder ssh-Fehler
	30	# 12/06/02 - Siggi - Version 1.0a, parent directories are also created, if
	31	# directory on remote host does not exist
	32	# 18/09/02 - Siggi - Fehlerabfragen korrigiert (waren wegen Klammerung
	33	# unwirksam)
	34	# 12/03/03 - Siggi - errfile and filelist are not stored in /tmp any more
	35	# errors in execution of ssh does not lead
	36	# to an abort on the NEC-system at DKRZ
	37	# 01/04/03 - Siggi - small error concerning creation of catalogs removed
	38	# 23/01/04 - Siggi - additional test output for scp on hurrikan
	39	# 02/12/04 - Siggi - additional check of file size on remote host after scp.
	40	# If the file sizes on local and remote host are equal,
	41	# the scp exit status is ignored
	42	# 03/12/04 - Siggi - additional checks of ssh actions independent of the
	43	# ssh exit status
	44	# 11/03/05 - Siggi - arguments are output in case of error exit
	45	# 25/10/05 - Siggi - put of catalogs realized
[306]	46	# 27/04/09 - Marcus- use option -p for all scp calls
[1]	47
	48
	49
	50	# VARIABLENVEREINBARUNGEN + DEFAULTWERTE
	51	random=$RANDOM
	52
	53	absolut=false
	54	append=false
	55	catalog_copy=false
	56	check=false
	57	delete=false
	58	errfile=ftpcopy.errfile.$random
	59	filelist=filelist.$random
	60	get=false
	61	local_host=`hostname`
	62	locat=normal
	63	make_catalog=false
	64	overwrite=false
	65	print_local_filename=false
	66	quote_wait=false
	67	remote_user=""
	68	silent=false
	69	transfermode=binary
	70	zyklusnr=""
	71	typeset -i iii icycle maxcycle=0 wait=0
	72
	73	# FEHLERBEHANDLUNG
	74	# BEI EXIT:
	75	trap 'if [[ $locat != normal ]]
	76	then
	77	cat $filelist $errfile
	78	rm -rf $filelist $errfile
	79	printf " +++ BATCH_SCP terminated \n"
	80	printf " locat = $locat \n"
	81	printf " arguments = $1 $2 $3 $4 \n\n"
	82	exit 1
	83	fi' exit
	84
	85
	86	# BEI TERMINAL-BREAK:
	87	trap 'rm -rf $filelist $errfile
	88	printf " +++ BATCH_SCP terminated \n\n"
	89	exit 1
	90	' 2
	91
	92
	93	# SHELLSCRIPT-OPTIONEN EINLESEN
	94	while getopts :aAbcCdgmnoqsu:w: option
	95	do
	96	case $option in
	97	(a) absolut=true;;
	98	(A) append=true;;
	99	(b) transfermode=binary;;
	100	(c) catalog_copy=true;;
	101	(C) check=true;;
	102	(d) delete=true;;
	103	(g) get=true;;
	104	(m) make_catalog=true;;
	105	(n) print_local_filename=true;; # Option ist nicht dokumentiert !
	106	(o) overwrite=true;;
	107	(q) quote_wait=true;;
	108	(s) silent=true;;
	109	(u) remote_user=$OPTARG;;
	110	(w) wait=$OPTARG;;
	111	(\?) printf " +++ option $OPTARG unknown \n"
	112	printf " --> call: batch_scp [-aAbcCdgmnoqsuw] <IP-adress> <localfile> <remotepath> <remotefile>\n"
	113	locat=parameter;exit;;
	114	esac
	115	done
	116	shift OPTIND-1
	117
	118
	119
	120	# KURZE AUFRUFBESCHREIBUNG WIRD HIER AUSGEGEBEN
	121	if [ "$1" = "?" ]
	122	then
	123	(printf "\n *** batch_scp can be called as follows:\n"
	124	printf "\n batch_scp -a -b -d -g -o -q -s -u.. -w.. <param1> <param2> <param3> <param4>\n"
	125	printf "\n Description of available options:\n"
	126	printf "\n Option Description Default-Value"
	127	printf "\n -a Filenames are absolute. No cycle- ---"
	128	printf "\n numbers will be determined"
	129	printf "\n -A append to destination file ---"
	130	printf "\n -b use binary-modus for transfer ASCII-modus"
	131	printf "\n -c transfer of directory ---"
	132	printf "\n -C check-Modus, no transfer ---"
	133	printf "\n -d file to be transferred will be ---"
	134	printf "\n deleted after successful transfer"
	135	printf "\n -g change of transfer direction, i.e. ---"
	136	printf "\n file will be transferred from"
	137	printf "\n destination host"
	138	printf "\n -o any existing file will be overwritten ---"
	139	printf "\n -q switch on \"quote wait\" on ---"
	140	printf "\n estination host"
	141	printf "\n -s do not display informative messages ---"
	142	printf "\n -u username on remote machine <username>"
	143	printf "\n -w waiting time in seconds, before trans- 0"
	144	printf "\n fer will be initiated"
	145	printf "\n "
	146	printf "\n The positional parameters <param1> - <param4> must be provided at"
	147	printf "\n any time and have the following meaning:"
	148	printf "\n <param1> - IP-adress of destination host"
	149	printf "\n or \"?\" (creates this outline)"
	150	printf "\n <param2> - abs. or rel. path of file to be transferred"
	151	printf "\n <param3> - directory (abs.!) on destination host. Special cahracters"
	152	printf "\n like \~ are allowed but must be quoted by \"."
	153	printf "\n <param4> - filename (without path!) on destination host; must not"
	154	printf "\n be given, if option -c is used."
	155	printf "\n When using option -g, file will be copied from destination host to file"
	156	printf "\n <param2>. In this case, no overwriting is possible.") \| more
	157	exit
	158	fi
	159
	160
	161	# PRUEFEN, OB ALLE ARGUMENTE VORLIEGEN
	162	if [[ "$1" = "" ]]
	163	then
	164	printf " +++ 1. argument missing \n"
	165	locat=argument; exit
	166	elif [[ "$2" = "" ]]
	167	then
	168	printf " +++ 2. argument missing \n"
	169	locat=argument; exit
	170	elif [[ "$3" = "" ]]
	171	then
	172	printf " +++ 3. argument missing \n"
	173	locat=argument; exit
	174	elif [[ "$4" = "" ]]
	175	then
	176	printf " +++ 4. argument missing \n"
	177	locat=argument; exit
	178	fi
	179
	180
	181	# USER-NAME AUF ZIELRECHNER AUS .NETRC-DATEI ERMITTELN
	182	if [[ -z $remote_user ]]
	183	then
	184
	185	# PRUEFEN, OB NETRC-DATEI VORHANDEN
	186	if [[ ! -f ~/.netrc ]]
	187	then
	188	printf " +++ option -u not given; \n"
	189	printf " getting remote-username from password file failed \n"
	190	printf " because ~/.netrc does not exist \n"
	191	locat=netrc; exit
	192	fi
	193	grep $1 ~/.netrc \| read dum dum dum remote_user dum dum
	194	fi
	195
	196
	197	# APPEND IST NUR BEI TRANSFER EINZELNER DATEIEN OHNE UEBERSCHREIBEN
	198	# ERLAUBT. GET IST DABEI EBENFALLS NICHT ERLAUBT
	199	if [[ $append = true && ( $get = true \|\| $catalog_copy = true \|\| $overwrite = true ) ]]
	200	then
	201	printf " +++ options -g, -c and -o are not allowed, if -A is given \n"
	202	locat=parameter; exit
	203	fi
	204
	205
	206	# DATEINAME IM 4. ARGUMENT DARF NUR BEIM UEBERSCHREIBEN ODER IM ABSOLUT-
	207	# MODUS PUNKTE ENTHALTEN
	208	if [[ $overwrite = false && $absolut = false && $(echo $4 \| grep -c "\.") != 0 ]]
	209	then
	210	printf " +++ 4th argument may only contain dots (".") , if one of the \n"
	211	printf " options -a or -o are given \n"
	212	locat=argument; exit
	213	fi
	214
	215
	216	# QUOTE WAIT FUNKTIONIERT NICHT BEIM KOPIEREN GANZER VERZEICHNISSE
	217	if [[ $quote_wait = true && $catalog_copy = true ]]
	218	then
	219	printf " +++ options -c and -q must not be used simultaneously\n"
	220	locat=parameter; exit
	221	fi
	222
	223
	224	# IM CHECK-MODUS WIRD SCRIPT HIER BEENDET
	225	[[ $check = true ]] && exit
	226
	227
	228	# BESTIMMTE ZEIT WARTEN, BIS WEITERGEMACHT WIRD (NOETIG Z.B. BEI TRANSFER
	229	# VON JOBPROTOKOLLEN AUS JOBS HERAUS)
	230	sleep $wait
	231
	232
	233	# PRUEFEN, OB LOKALE DATEI/LOKALES VERZEICHNIS VORHANDEN BZW. NICHT VORHANDEN
	234	if [[ $get = false ]]
	235	then
	236	if [[ $catalog_copy = false ]]
	237	then
	238	if [[ ! -f $2 ]]
	239	then
	240	printf " +++ file \"$2\" to be transferred does not exist \n"
	241	locat=localfile; exit
	242	fi
	243	else
	244	if [[ ! -d $2 ]]
	245	then
	246	printf " +++ directory \"$2\" to be transferred does not exist\n"
	247	printf " or is not a directory \n"
	248	locat=localfile; exit
	249	fi
	250	fi
	251	else
	252	if [[ $catalog_copy = false ]]
	253	then
	254	if [[ -f $2 ]]
	255	then
	256	if [[ $overwrite = true ]]
	257	then
	258	rm $2
	259	else
	260	printf " +++ local file \"$2\" is already existing \n"
	261	locat=localfile; exit
	262	fi
	263	else
	264
	265	# PRUEFEN, OB SICH LOKALE DATEI ANLEGEN LAESST
	266	local_dirname=`dirname $2`
	267	if [[ ! -d $local_dirname ]]
	268	then
	269	printf " +++ local directory \"$local_dirname\" \n"
	270	printf " does not exist or is not a directory \n"
	271	printf " +++ cannot copy file \"$3/$4\" \n"
	272	printf " from \"$1\" to \"$local_host\" \n"
	273	locat=localfile; exit
	274	fi
	275	fi
	276	else
	277	if [[ -d $2 \|\| -f $2 ]]
	278	then
	279	printf " +++ local directory \"$2\" is already existing, \n"
	280	printf " or a file with the same name exists \n"
	281	locat=localfile; exit
	282	fi
	283	fi
	284	fi
	285
	286
	287	# VERZEICHNISLSTE DES ZIELRECHNERS ERSTELLEN
	288	ssh $1 -l $remote_user "cd $3; ls -1; echo '*** list complete'" > $filelist 2>&1
	289	ssh_status=$?
	290
	291	if [[ $ssh_status != 0 ]]
	292	then
	293	if [[ ! -f $filelist ]]
	294	then
	295	echo " local_host = $local_host ssh_status = $ssh_status"
	296	locat=ssh_failed_1; exit
	297	else
	298	if [[ $(grep -c "*** list complete" $filelist) = 0 ]]
	299	then
	300	echo " local_host = $local_host ssh_status = $ssh_status"
	301	locat=ssh_failed_2; exit
	302	fi
	303	fi
	304	fi
	305
	306
	307	# PRUEFEN, OB VERZEICHNIS VORHANDEN IST. WENN GANZES VERZEICHNISS ZUM
	308	# ZIELRECHNER KOPIERT WERDEN SOLL, DARF DORT NOCH KEIN ENTSPRECHENDES
	309	# VERZEICHNIS VORHANDEN SEIN
	310	if [[ $(cat $filelist \| grep -c "not found") != 0 \|\| \
	311	$(cat $filelist \| grep -c "No such file or directory") != 0 ]]
	312	then
	313	if [[ ! ( $catalog_copy = true && $get = false ) ]]
	314	then
	315	if [[ $make_catalog = false ]]
	316	then
	317	printf " +++ directory \"$3\" does not exist on destination host (\"$1\") \n"
	318	locat=directory; exit
	319	else
	320	if [[ $silent = false ]]
	321	then
	322	printf " >>> directory \"$3\" does not exist on destination host (\"$1\")"
	323	printf "\n trying to create \"$3\" \n"
	324	fi
	325
	326	make_catalog=force
	327	fi
	328	fi
	329	fi
	330
	331
	332	# PRUEFEN, OB DATEI/VERZEICHNIS VORHANDEN, WENN JA, HOECHSTEN ZYKLUS
	333	# ERMITTELN (BZW. IM ABSOLUT-MODUS PRUEFEN, OB DATEI VORHANDEN IST)
	334	# DAS GANZE ABER NUR, WENN NICHT OVERWRITE-MODUS GEWAEHLT WURDE, DIE
	335	# EVENTUELL VORHANDENE DATEI ALSO UEBERSCHRIEBEN WERDEN SOLL
	336	found=false
	337	if [[ ( $overwrite = false && $get = false ) \|\| $get = true ]]
	338	then
	339	while read zeile
	340	do
	341	if [[ $absolut = false ]]
	342	then
	343	text=$(echo $zeile \| cut -f1 -d".")
	344	if [[ "$text" = "$4" ]]
	345	then
	346	found=true
	347	cycle=$(echo $zeile \| cut -f2 -d".")
	348	if [[ "$cycle" = "$text" ]]
	349	then
	350	(( icycle = 0 ))
	351	else
	352
	353	# PRUEFEN, OB CYCLE EINE ZAHL IST
	354	(( iii = 1 ))
	355	character=`echo $cycle \| cut -c$iii`
	356	character_found=false
	357	while [[ "$character" != "" && $character_found = false ]]
	358	do
	359	case $character in
	360	(0\|1\|2\|3\|4\|5\|6\|7\|8\|9) true;;
	361	(*) character_found=true
	362	esac
	363	(( iii = iii + 1 ))
	364	character=`echo $cycle \| cut -c$iii`
	365	done
	366
	367	if [[ $character_found = false ]]
	368	then
	369	(( icycle = $cycle ))
	370	fi
	371	fi >\|$errfile 2>&1 # AUSGABE FEHLER AUF ERRFILE WENN CYCLE NICHTNUMERISCH
	372
	373
	374	# INFORMATIVE AUSGABE, WENN DATEI NICHTNUMERISCHE EXTENSION HAT
	375	# if [[ $(cat $errfile \| grep -c "bad number") != 0 ]]
	376	if [[ $character_found = true ]]
	377	then
	378	if [[ $cycle != "$5" ]]
	379	then
	380	printf " +++ file \"$text\" has non-numerical extension \".$cycle\" \n"
	381	locat=file; exit
	382	else
	383	if [[ $silent = false ]]
	384	then
	385	printf " >>> file \"$text\" has non-numerical extension \".$cycle\" \n"
	386	fi
	387	fi
	388	fi
	389
	390	if (( icycle > maxcycle ))
	391	then
	392	(( maxcycle = icycle ))
	393	fi
	394	fi
	395
	396	else
	397
	398	# IM ABSOLUT-MODUS MUSS NUR GEPRUEFT WERDEN, OB DIE DATEI
	399	# VORHANDEN IST
	400	[[ $4 = $zeile ]] && found=true
	401	fi
	402
	403	done <$filelist
	404	fi
	405
	406	if [[ $found = true ]]
	407	then
	408	if [[ $get = false ]]
	409	then
	410	if [[ $absolut = false ]]
	411	then
	412	if [[ $append = false ]]
	413	then
	414	(( maxcycle = maxcycle + 1 ))
	415	zyklusnr=".$maxcycle"
	416	else
	417	if (( maxcycle == 0 ))
	418	then
	419	zyklusnr=""
	420	else
	421	zyklusnr=".$maxcycle"
	422	fi
	423	fi
	424	else
	425	if [[ $overwrite = false ]]
	426	then
	427	printf " +++ file \"$3/$4\" \n"
	428	printf " already exists on destination host (use -o, if necessary) \n"
	429	locat=file; exit
	430	fi
	431	fi
	432	else
	433	if [[ $absolut = false ]]
	434	then
	435	if (( maxcycle == 0 ))
	436	then
	437	zyklusnr=""
	438	else
	439	zyklusnr=".$maxcycle"
	440	(( maxcycle = 0 ))
	441	fi
	442	else
	443	zyklusnr=""
	444	fi
	445	fi
	446	else
	447	zyklusnr=""
	448
	449	# ABBRUCH, WENN DATEI VON ZIELRECHNER GEHOLT WERDEN SOLL, DORT ABER
	450	# NICHT VORHANDEN IST
	451	if [[ $get = true ]]
	452	then
	453	printf " +++ file \"$3/$4\" \n"
	454	printf " does not exist on destination host (\"$1\") \n"
	455	locat=remotefile; exit
	456	fi
	457	fi
	458
	459
	460	# FALLS KATALOG ERZEUGT WIRD, DARF DIE DATEI IN KEINEM FALL EINE
	461	# ZYKLUSNUMMER BESITZEN, DA SIE JA NOCh GARNICHT EXISTIEREN KANN
	462	if [[ $make_catalog = force ]]
	463	then
	464	zyklusnr=""
	465	(( maxcycle = 0 ))
	466	fi
	467
	468
	469	# FALLS NAMENSOPTION (-n) GEWAEHLT WURDE, NUR DEN ERMITTELTEN LOKALEN
	470	# DATEINAMEN DES ZIELRECHNERS AUSGEBEN UND SCRIPT BEENDEN
	471	if [[ $print_local_filename = true ]]
	472	then
	473	printf "$4$zyklusnr\n"
	474	rm -r $filelist
	475	exit
	476	fi
	477
	478
	479	# FALLS 5. ARGUMENT ANGEGEBEN WURDE, WIRD DIES ALS FILE-EXTENSION
	480	# HINTER DIE ZYKLUS-NUMMER GEHAENGT (FUNKTIONIERT NUR BEI KOPIEREN EINER
	481	# DATEI AUF ZIELRECHNER
	482	if [[ "$5" != "" && $get = false ]]
	483	then
	484	zyklusnr=${zyklusnr}.$5
	485	fi
	486
	487
	488	# BEI VERZEICHNISTRANSFER VON ZIELRECHNER AUF LOKALEN RECHNER PRUEFEN, OB
	489	# $3 AUF ZIELRECHNER WIRKLICH EIN VERZEICHNIS IST
	490	if [[ $catalog_copy = true && $get = true ]]
	491	then
	492	rm -rf $filelist
	493	ssh $1 -l $remote_user "cd $3" > $filelist
	494	if [[ $? != 0 ]]
	495	then
	496	locat=ssh_failed_3; exit
	497	fi
	498
	499	if [[ $(cat $filelist \| grep -c "Not a directory") != 0 ]]
	500	then
	501	printf " +++ \"$3\" on destination host is not a directory \n"
	502	locat=directory; exit
	503	fi
	504	fi
	505
	506
	507	# BEI KATALOGTRANSFER AUF LOKALEN RECHNER ENTSPRECHENDES VERZEICHNIS
	508	# ANLEGEN
	509	if [[ $catalog_copy = true ]]
	510	then
	511	if [[ $get = true ]]
	512	then
	513	mkdir $2
	514	fi
	515	fi
	516
	517
	518	# Auf IBM-Rechnern (HLRN) Tilde aus Katalognamen entfernen, da scp
	519	# diese nicht versteht
	520	catalog_name=$3
	521	if [[ $(hostname \| cut -c1-4) = hreg \|\| $(hostname \| cut -c1-4) = breg ]]
	522	then
	523	catalog_name=${catalog_name#"~/"}
	524	catalog_name=${catalog_name#"~"}
	525	fi
	526	[[ "$catalog_name" != "" ]] && catalog_name=${catalog_name}/
	527
	528
	529	# DATEI/VERZEICHNIS PER SCP UEBERTRAGEN
	530	if [[ $get = false ]]
	531	then
	532	if [[ $make_catalog != force ]]
	533	then
	534	if [[ $append = false ]]
	535	then
	536	if [[ $(echo $local_host \| cut -c1-2) = cs ]]
	537	then
	538	if [[ $catalog_copy = false ]]
	539	then
[306]	540	scp -p -q -v $2 $remote_user@$1:$catalog_name$4$zyklusnr
[1]	541	else
[306]	542	scp -p -r -q -v $2 $remote_user@$1:$catalog_name$4$zyklusnr
[1]	543	fi
	544	else
	545	if [[ $catalog_copy = false ]]
	546	then
[306]	547	scp -p $2 $remote_user@$1:$catalog_name$4$zyklusnr > /dev/null
[1]	548	else
[306]	549	scp -p -r $2 $remote_user@$1:$catalog_name$4$zyklusnr > /dev/null
[1]	550	fi
	551	fi
	552	scp_status=$?
	553
	554	if [[ $scp_status != 0 ]]
	555	then
	556	# CHECK, OB DATEIGROESSEN AUF LOKALEM UND REMOTERECHNER
	557	# UEBEREINSTIMMEN
	558	local_size=`ls -al $2`
	559	local_size=`echo $local_size \| cut -d" " -f5`
	560
	561	remote_size=`ssh $1 -l $remote_user "ls -al $catalog_name$4$zyklusnr"`
	562	remote_size=`echo $remote_size \| cut -d" " -f5`
	563
	564	if [[ "$remote_size" != "$local_size" ]]
	565	then
	566	echo " +++ scp failed on host \"$local_host\" with exit $scp_status"
	567	echo " local size = \"$local_size\" remote size = \"$remote_size\" "
	568	date
	569	locat=scp_failed; exit
	570	fi
	571	fi
	572	else
[306]	573	scp -p $2 $remote_user@$1:${catalog_name}batch_scp_append_file.$random > /dev/null
[1]	574	if [[ $? != 0 ]]
	575	then
	576	# CHECK, OB DATEIGROESSEN AUF LOKALEM UND REMOTERECHNER
	577	# UEBEREINSTIMMEN
	578	local_size=`ls -al $2`
	579	local_size=`echo $local_size \| cut -d" " -f5`
	580
	581	remote_size=`ssh $1 -l $remote_user "ls -al ${catalog_name}batch_scp_append_file.$random"`
	582	remote_size=`echo $remote_size \| cut -d" " -f5`
	583
	584	if [[ "$remote_size" != "$local_size" ]]
	585	then
	586	echo " +++ scp failed on host \"$local_host\" with exit $scp_status"
	587	echo " local size = \"$local_size\" remote size = \"$remote_size\" "
	588	date
	589	locat=scp_for_append_failed; exit
	590	fi
	591	fi
	592
	593	rm $filelist
	594
	595	ssh $1 -l $remote_user "cd $3; cat batch_scp_append_file.$random >> $4$zyklusnr; rm batch_scp_append_file.$random; echo '*** append complete'" > $filelist
	596	if [[ $? != 0 ]]
	597	then
	598	if [[ ! -f $filelist ]]
	599	then
	600	locat=append_via_ssh_failed; exit
	601	else
	602	if [[ $(grep -c "*** append complete" $filelist) = 0 ]]
	603	then
	604	locat=append_via_ssh_failed; exit
	605	fi
	606	fi
	607	fi
	608	fi
	609	else
	610	ssh $1 -l $remote_user "mkdir -p $3"
	611	if [[ $? != 0 ]]
	612	then
	613	locat=ssh_failed_4; exit
	614	fi
[306]	615	scp -p $2 $remote_user@$1:$catalog_name$4$zyklusnr > /dev/null
[1]	616	if [[ $? != 0 ]]
	617	then
	618	locat=scp_failed; exit
	619	fi
	620	fi
	621
	622	else
	623
	624	if [[ $catalog_copy = false ]]
	625	then
	626	if [[ $quote_wait = true ]]
	627	then
	628
	629	printf " +++ quote wait not realized with BATCH_SCP"
	630	locat=unavailable_feature; exit
	631
	632	else
	633
[306]	634	scp -p $remote_user@$1:$catalog_name$4$zyklusnr $2 > /dev/null
[1]	635	if [[ $? != 0 ]]
	636	then
	637	locat=scp_failed; exit
	638	fi
	639
	640	fi
	641	else
	642
	643	printf " +++ get of whole cataloges not realized with BATCH_SCP so far"
	644	locat=unavailable_feature; exit
	645
	646	# ftp -i $1 << %END% > /dev/null
	647	#$transfermode
	648	#cd $3
	649	#mget *
	650	#quit
	651	#%END%
	652	fi
	653	fi
	654
	655
	656
	657	# EVTL. TRANSFERIERTE DATEI AUF LOKALEM RECHNER LOESCHEN
	658	if [[ $delete = true && $get = false ]]
	659	then
	660	rm -rf $2
	661	fi
	662
	663
	664
	665	# ABSCHLUSSMELDUNG
	666	if [[ $silent = false ]]
	667	then
	668	if (( maxcycle == 0 ))
	669	then
	670	if [[ $append = false ]]
	671	then
	672	printf " >>> transfer successful \n"
	673	else
	674	printf " >>> file was appended \n"
	675	fi
	676	else
	677	printf " >>> transfer successful \n"
	678	if [[ $append = false ]]
	679	then
	680	if [[ $catalog_copy = false ]]
	681	then
	682	printf " new file has cycle number $maxcycle \n"
	683	else
	684	printf " new catalog has cycle number $maxcycle \n"
	685	fi
	686	else
	687	printf " append to cycle number $maxcycle \n"
	688	fi
	689	fi
	690	fi
	691
	692	rm -rf $filelist $errfile

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format