Home

Context Navigation

batch_scp @ 205

Last change on this file since 205 was 169, checked in by raasch, 17 years ago
property settings for scripts changed
Property svn:keywords set to `Id`
File size: 20.9 KB

Rev	Line
[1]	1	#! /bin/ksh
	2	# batch_scp - Shellskript Version: @(#)batch_scp 1.0a 25/10/05
[169]	3	# $Id: batch_scp 169 2008-05-21 13:33:33Z steinfeld $
[1]	4
	5	# Prozedur zum automatischen Transfer von Dateien mittels scp
	6	#
	7	# batch_scp hat 4 Argumente:
	8	# $1 = IP-Adresse des Zielrechners
	9	# $2 = zu uebertragende Datei
	10	# $3 = Verzeichnis, in das kopiert werden soll
	11	# $4 = Dateiname der Zieldatei
	12
	13
	14	# ACHTUNG!!!!!!!!
	15	#
	16	# batch_scp hat noch folgenden grossen Mangel: wenn die Verzeichnisse
	17	# auf den jeweiligen Remote-Rechnern aeltere Dateien beinhalten,
	18	# die beim "ls -al" eine Jahreszahl und keine Uhrzeit (aa:bb) liefern,
	19	# dann kann batch_scp die Dateinamen nicht ueberpruefen und findet
	20	# z.B. bei -g die entsprechende Datei nicht!
	21	#
	22	#
	23
	24
	25	# letzte Aenderung:
	26	# 29/11/01 - Siggi - Entwicklungsbeginn
	27	# 04/01/02 - Siggi - Version 1.0 funktionsfaehig
	28	# 15/02/02 - Siggi - Verzeichnis-Listing umgestellt von "ls -al" auf "ls -1"
	29	# 30/05/02 - Siggi - Abbruch mit exit 1 bei scp- oder ssh-Fehler
	30	# 12/06/02 - Siggi - Version 1.0a, parent directories are also created, if
	31	# directory on remote host does not exist
	32	# 18/09/02 - Siggi - Fehlerabfragen korrigiert (waren wegen Klammerung
	33	# unwirksam)
	34	# 12/03/03 - Siggi - errfile and filelist are not stored in /tmp any more
	35	# errors in execution of ssh does not lead
	36	# to an abort on the NEC-system at DKRZ
	37	# 01/04/03 - Siggi - small error concerning creation of catalogs removed
	38	# 23/01/04 - Siggi - additional test output for scp on hurrikan
	39	# 02/12/04 - Siggi - additional check of file size on remote host after scp.
	40	# If the file sizes on local and remote host are equal,
	41	# the scp exit status is ignored
	42	# 03/12/04 - Siggi - additional checks of ssh actions independent of the
	43	# ssh exit status
	44	# 11/03/05 - Siggi - arguments are output in case of error exit
	45	# 25/10/05 - Siggi - put of catalogs realized
	46
	47
	48
	49	# VARIABLENVEREINBARUNGEN + DEFAULTWERTE
	50	random=$RANDOM
	51
	52	absolut=false
	53	append=false
	54	catalog_copy=false
	55	check=false
	56	delete=false
	57	errfile=ftpcopy.errfile.$random
	58	filelist=filelist.$random
	59	get=false
	60	local_host=`hostname`
	61	locat=normal
	62	make_catalog=false
	63	overwrite=false
	64	print_local_filename=false
	65	quote_wait=false
	66	remote_user=""
	67	silent=false
	68	transfermode=binary
	69	zyklusnr=""
	70	typeset -i iii icycle maxcycle=0 wait=0
	71
	72	# FEHLERBEHANDLUNG
	73	# BEI EXIT:
	74	trap 'if [[ $locat != normal ]]
	75	then
	76	cat $filelist $errfile
	77	rm -rf $filelist $errfile
	78	printf " +++ BATCH_SCP terminated \n"
	79	printf " locat = $locat \n"
	80	printf " arguments = $1 $2 $3 $4 \n\n"
	81	exit 1
	82	fi' exit
	83
	84
	85	# BEI TERMINAL-BREAK:
	86	trap 'rm -rf $filelist $errfile
	87	printf " +++ BATCH_SCP terminated \n\n"
	88	exit 1
	89	' 2
	90
	91
	92	# SHELLSCRIPT-OPTIONEN EINLESEN
	93	while getopts :aAbcCdgmnoqsu:w: option
	94	do
	95	case $option in
	96	(a) absolut=true;;
	97	(A) append=true;;
	98	(b) transfermode=binary;;
	99	(c) catalog_copy=true;;
	100	(C) check=true;;
	101	(d) delete=true;;
	102	(g) get=true;;
	103	(m) make_catalog=true;;
	104	(n) print_local_filename=true;; # Option ist nicht dokumentiert !
	105	(o) overwrite=true;;
	106	(q) quote_wait=true;;
	107	(s) silent=true;;
	108	(u) remote_user=$OPTARG;;
	109	(w) wait=$OPTARG;;
	110	(\?) printf " +++ option $OPTARG unknown \n"
	111	printf " --> call: batch_scp [-aAbcCdgmnoqsuw] <IP-adress> <localfile> <remotepath> <remotefile>\n"
	112	locat=parameter;exit;;
	113	esac
	114	done
	115	shift OPTIND-1
	116
	117
	118
	119	# KURZE AUFRUFBESCHREIBUNG WIRD HIER AUSGEGEBEN
	120	if [ "$1" = "?" ]
	121	then
	122	(printf "\n *** batch_scp can be called as follows:\n"
	123	printf "\n batch_scp -a -b -d -g -o -q -s -u.. -w.. <param1> <param2> <param3> <param4>\n"
	124	printf "\n Description of available options:\n"
	125	printf "\n Option Description Default-Value"
	126	printf "\n -a Filenames are absolute. No cycle- ---"
	127	printf "\n numbers will be determined"
	128	printf "\n -A append to destination file ---"
	129	printf "\n -b use binary-modus for transfer ASCII-modus"
	130	printf "\n -c transfer of directory ---"
	131	printf "\n -C check-Modus, no transfer ---"
	132	printf "\n -d file to be transferred will be ---"
	133	printf "\n deleted after successful transfer"
	134	printf "\n -g change of transfer direction, i.e. ---"
	135	printf "\n file will be transferred from"
	136	printf "\n destination host"
	137	printf "\n -o any existing file will be overwritten ---"
	138	printf "\n -q switch on \"quote wait\" on ---"
	139	printf "\n estination host"
	140	printf "\n -s do not display informative messages ---"
	141	printf "\n -u username on remote machine <username>"
	142	printf "\n -w waiting time in seconds, before trans- 0"
	143	printf "\n fer will be initiated"
	144	printf "\n "
	145	printf "\n The positional parameters <param1> - <param4> must be provided at"
	146	printf "\n any time and have the following meaning:"
	147	printf "\n <param1> - IP-adress of destination host"
	148	printf "\n or \"?\" (creates this outline)"
	149	printf "\n <param2> - abs. or rel. path of file to be transferred"
	150	printf "\n <param3> - directory (abs.!) on destination host. Special cahracters"
	151	printf "\n like \~ are allowed but must be quoted by \"."
	152	printf "\n <param4> - filename (without path!) on destination host; must not"
	153	printf "\n be given, if option -c is used."
	154	printf "\n When using option -g, file will be copied from destination host to file"
	155	printf "\n <param2>. In this case, no overwriting is possible.") \| more
	156	exit
	157	fi
	158
	159
	160	# PRUEFEN, OB ALLE ARGUMENTE VORLIEGEN
	161	if [[ "$1" = "" ]]
	162	then
	163	printf " +++ 1. argument missing \n"
	164	locat=argument; exit
	165	elif [[ "$2" = "" ]]
	166	then
	167	printf " +++ 2. argument missing \n"
	168	locat=argument; exit
	169	elif [[ "$3" = "" ]]
	170	then
	171	printf " +++ 3. argument missing \n"
	172	locat=argument; exit
	173	elif [[ "$4" = "" ]]
	174	then
	175	printf " +++ 4. argument missing \n"
	176	locat=argument; exit
	177	fi
	178
	179
	180	# USER-NAME AUF ZIELRECHNER AUS .NETRC-DATEI ERMITTELN
	181	if [[ -z $remote_user ]]
	182	then
	183
	184	# PRUEFEN, OB NETRC-DATEI VORHANDEN
	185	if [[ ! -f ~/.netrc ]]
	186	then
	187	printf " +++ option -u not given; \n"
	188	printf " getting remote-username from password file failed \n"
	189	printf " because ~/.netrc does not exist \n"
	190	locat=netrc; exit
	191	fi
	192	grep $1 ~/.netrc \| read dum dum dum remote_user dum dum
	193	fi
	194
	195
	196	# APPEND IST NUR BEI TRANSFER EINZELNER DATEIEN OHNE UEBERSCHREIBEN
	197	# ERLAUBT. GET IST DABEI EBENFALLS NICHT ERLAUBT
	198	if [[ $append = true && ( $get = true \|\| $catalog_copy = true \|\| $overwrite = true ) ]]
	199	then
	200	printf " +++ options -g, -c and -o are not allowed, if -A is given \n"
	201	locat=parameter; exit
	202	fi
	203
	204
	205	# DATEINAME IM 4. ARGUMENT DARF NUR BEIM UEBERSCHREIBEN ODER IM ABSOLUT-
	206	# MODUS PUNKTE ENTHALTEN
	207	if [[ $overwrite = false && $absolut = false && $(echo $4 \| grep -c "\.") != 0 ]]
	208	then
	209	printf " +++ 4th argument may only contain dots (".") , if one of the \n"
	210	printf " options -a or -o are given \n"
	211	locat=argument; exit
	212	fi
	213
	214
	215	# QUOTE WAIT FUNKTIONIERT NICHT BEIM KOPIEREN GANZER VERZEICHNISSE
	216	if [[ $quote_wait = true && $catalog_copy = true ]]
	217	then
	218	printf " +++ options -c and -q must not be used simultaneously\n"
	219	locat=parameter; exit
	220	fi
	221
	222
	223	# IM CHECK-MODUS WIRD SCRIPT HIER BEENDET
	224	[[ $check = true ]] && exit
	225
	226
	227	# BESTIMMTE ZEIT WARTEN, BIS WEITERGEMACHT WIRD (NOETIG Z.B. BEI TRANSFER
	228	# VON JOBPROTOKOLLEN AUS JOBS HERAUS)
	229	sleep $wait
	230
	231
	232	# PRUEFEN, OB LOKALE DATEI/LOKALES VERZEICHNIS VORHANDEN BZW. NICHT VORHANDEN
	233	if [[ $get = false ]]
	234	then
	235	if [[ $catalog_copy = false ]]
	236	then
	237	if [[ ! -f $2 ]]
	238	then
	239	printf " +++ file \"$2\" to be transferred does not exist \n"
	240	locat=localfile; exit
	241	fi
	242	else
	243	if [[ ! -d $2 ]]
	244	then
	245	printf " +++ directory \"$2\" to be transferred does not exist\n"
	246	printf " or is not a directory \n"
	247	locat=localfile; exit
	248	fi
	249	fi
	250	else
	251	if [[ $catalog_copy = false ]]
	252	then
	253	if [[ -f $2 ]]
	254	then
	255	if [[ $overwrite = true ]]
	256	then
	257	rm $2
	258	else
	259	printf " +++ local file \"$2\" is already existing \n"
	260	locat=localfile; exit
	261	fi
	262	else
	263
	264	# PRUEFEN, OB SICH LOKALE DATEI ANLEGEN LAESST
	265	local_dirname=`dirname $2`
	266	if [[ ! -d $local_dirname ]]
	267	then
	268	printf " +++ local directory \"$local_dirname\" \n"
	269	printf " does not exist or is not a directory \n"
	270	printf " +++ cannot copy file \"$3/$4\" \n"
	271	printf " from \"$1\" to \"$local_host\" \n"
	272	locat=localfile; exit
	273	fi
	274	fi
	275	else
	276	if [[ -d $2 \|\| -f $2 ]]
	277	then
	278	printf " +++ local directory \"$2\" is already existing, \n"
	279	printf " or a file with the same name exists \n"
	280	locat=localfile; exit
	281	fi
	282	fi
	283	fi
	284
	285
	286	# VERZEICHNISLSTE DES ZIELRECHNERS ERSTELLEN
	287	ssh $1 -l $remote_user "cd $3; ls -1; echo '*** list complete'" > $filelist 2>&1
	288	ssh_status=$?
	289
	290	if [[ $ssh_status != 0 ]]
	291	then
	292	if [[ ! -f $filelist ]]
	293	then
	294	echo " local_host = $local_host ssh_status = $ssh_status"
	295	locat=ssh_failed_1; exit
	296	else
	297	if [[ $(grep -c "*** list complete" $filelist) = 0 ]]
	298	then
	299	echo " local_host = $local_host ssh_status = $ssh_status"
	300	locat=ssh_failed_2; exit
	301	fi
	302	fi
	303	fi
	304
	305
	306	# PRUEFEN, OB VERZEICHNIS VORHANDEN IST. WENN GANZES VERZEICHNISS ZUM
	307	# ZIELRECHNER KOPIERT WERDEN SOLL, DARF DORT NOCH KEIN ENTSPRECHENDES
	308	# VERZEICHNIS VORHANDEN SEIN
	309	if [[ $(cat $filelist \| grep -c "not found") != 0 \|\| \
	310	$(cat $filelist \| grep -c "No such file or directory") != 0 ]]
	311	then
	312	if [[ ! ( $catalog_copy = true && $get = false ) ]]
	313	then
	314	if [[ $make_catalog = false ]]
	315	then
	316	printf " +++ directory \"$3\" does not exist on destination host (\"$1\") \n"
	317	locat=directory; exit
	318	else
	319	if [[ $silent = false ]]
	320	then
	321	printf " >>> directory \"$3\" does not exist on destination host (\"$1\")"
	322	printf "\n trying to create \"$3\" \n"
	323	fi
	324
	325	make_catalog=force
	326	fi
	327	fi
	328	fi
	329
	330
	331	# PRUEFEN, OB DATEI/VERZEICHNIS VORHANDEN, WENN JA, HOECHSTEN ZYKLUS
	332	# ERMITTELN (BZW. IM ABSOLUT-MODUS PRUEFEN, OB DATEI VORHANDEN IST)
	333	# DAS GANZE ABER NUR, WENN NICHT OVERWRITE-MODUS GEWAEHLT WURDE, DIE
	334	# EVENTUELL VORHANDENE DATEI ALSO UEBERSCHRIEBEN WERDEN SOLL
	335	found=false
	336	if [[ ( $overwrite = false && $get = false ) \|\| $get = true ]]
	337	then
	338	while read zeile
	339	do
	340	if [[ $absolut = false ]]
	341	then
	342	text=$(echo $zeile \| cut -f1 -d".")
	343	if [[ "$text" = "$4" ]]
	344	then
	345	found=true
	346	cycle=$(echo $zeile \| cut -f2 -d".")
	347	if [[ "$cycle" = "$text" ]]
	348	then
	349	(( icycle = 0 ))
	350	else
	351
	352	# PRUEFEN, OB CYCLE EINE ZAHL IST
	353	(( iii = 1 ))
	354	character=`echo $cycle \| cut -c$iii`
	355	character_found=false
	356	while [[ "$character" != "" && $character_found = false ]]
	357	do
	358	case $character in
	359	(0\|1\|2\|3\|4\|5\|6\|7\|8\|9) true;;
	360	(*) character_found=true
	361	esac
	362	(( iii = iii + 1 ))
	363	character=`echo $cycle \| cut -c$iii`
	364	done
	365
	366	if [[ $character_found = false ]]
	367	then
	368	(( icycle = $cycle ))
	369	fi
	370	fi >\|$errfile 2>&1 # AUSGABE FEHLER AUF ERRFILE WENN CYCLE NICHTNUMERISCH
	371
	372
	373	# INFORMATIVE AUSGABE, WENN DATEI NICHTNUMERISCHE EXTENSION HAT
	374	# if [[ $(cat $errfile \| grep -c "bad number") != 0 ]]
	375	if [[ $character_found = true ]]
	376	then
	377	if [[ $cycle != "$5" ]]
	378	then
	379	printf " +++ file \"$text\" has non-numerical extension \".$cycle\" \n"
	380	locat=file; exit
	381	else
	382	if [[ $silent = false ]]
	383	then
	384	printf " >>> file \"$text\" has non-numerical extension \".$cycle\" \n"
	385	fi
	386	fi
	387	fi
	388
	389	if (( icycle > maxcycle ))
	390	then
	391	(( maxcycle = icycle ))
	392	fi
	393	fi
	394
	395	else
	396
	397	# IM ABSOLUT-MODUS MUSS NUR GEPRUEFT WERDEN, OB DIE DATEI
	398	# VORHANDEN IST
	399	[[ $4 = $zeile ]] && found=true
	400	fi
	401
	402	done <$filelist
	403	fi
	404
	405	if [[ $found = true ]]
	406	then
	407	if [[ $get = false ]]
	408	then
	409	if [[ $absolut = false ]]
	410	then
	411	if [[ $append = false ]]
	412	then
	413	(( maxcycle = maxcycle + 1 ))
	414	zyklusnr=".$maxcycle"
	415	else
	416	if (( maxcycle == 0 ))
	417	then
	418	zyklusnr=""
	419	else
	420	zyklusnr=".$maxcycle"
	421	fi
	422	fi
	423	else
	424	if [[ $overwrite = false ]]
	425	then
	426	printf " +++ file \"$3/$4\" \n"
	427	printf " already exists on destination host (use -o, if necessary) \n"
	428	locat=file; exit
	429	fi
	430	fi
	431	else
	432	if [[ $absolut = false ]]
	433	then
	434	if (( maxcycle == 0 ))
	435	then
	436	zyklusnr=""
	437	else
	438	zyklusnr=".$maxcycle"
	439	(( maxcycle = 0 ))
	440	fi
	441	else
	442	zyklusnr=""
	443	fi
	444	fi
	445	else
	446	zyklusnr=""
	447
	448	# ABBRUCH, WENN DATEI VON ZIELRECHNER GEHOLT WERDEN SOLL, DORT ABER
	449	# NICHT VORHANDEN IST
	450	if [[ $get = true ]]
	451	then
	452	printf " +++ file \"$3/$4\" \n"
	453	printf " does not exist on destination host (\"$1\") \n"
	454	locat=remotefile; exit
	455	fi
	456	fi
	457
	458
	459	# FALLS KATALOG ERZEUGT WIRD, DARF DIE DATEI IN KEINEM FALL EINE
	460	# ZYKLUSNUMMER BESITZEN, DA SIE JA NOCh GARNICHT EXISTIEREN KANN
	461	if [[ $make_catalog = force ]]
	462	then
	463	zyklusnr=""
	464	(( maxcycle = 0 ))
	465	fi
	466
	467
	468	# FALLS NAMENSOPTION (-n) GEWAEHLT WURDE, NUR DEN ERMITTELTEN LOKALEN
	469	# DATEINAMEN DES ZIELRECHNERS AUSGEBEN UND SCRIPT BEENDEN
	470	if [[ $print_local_filename = true ]]
	471	then
	472	printf "$4$zyklusnr\n"
	473	rm -r $filelist
	474	exit
	475	fi
	476
	477
	478	# FALLS 5. ARGUMENT ANGEGEBEN WURDE, WIRD DIES ALS FILE-EXTENSION
	479	# HINTER DIE ZYKLUS-NUMMER GEHAENGT (FUNKTIONIERT NUR BEI KOPIEREN EINER
	480	# DATEI AUF ZIELRECHNER
	481	if [[ "$5" != "" && $get = false ]]
	482	then
	483	zyklusnr=${zyklusnr}.$5
	484	fi
	485
	486
	487	# BEI VERZEICHNISTRANSFER VON ZIELRECHNER AUF LOKALEN RECHNER PRUEFEN, OB
	488	# $3 AUF ZIELRECHNER WIRKLICH EIN VERZEICHNIS IST
	489	if [[ $catalog_copy = true && $get = true ]]
	490	then
	491	rm -rf $filelist
	492	ssh $1 -l $remote_user "cd $3" > $filelist
	493	if [[ $? != 0 ]]
	494	then
	495	locat=ssh_failed_3; exit
	496	fi
	497
	498	if [[ $(cat $filelist \| grep -c "Not a directory") != 0 ]]
	499	then
	500	printf " +++ \"$3\" on destination host is not a directory \n"
	501	locat=directory; exit
	502	fi
	503	fi
	504
	505
	506	# BEI KATALOGTRANSFER AUF LOKALEN RECHNER ENTSPRECHENDES VERZEICHNIS
	507	# ANLEGEN
	508	if [[ $catalog_copy = true ]]
	509	then
	510	if [[ $get = true ]]
	511	then
	512	mkdir $2
	513	fi
	514	fi
	515
	516
	517	# Auf IBM-Rechnern (HLRN) Tilde aus Katalognamen entfernen, da scp
	518	# diese nicht versteht
	519	catalog_name=$3
	520	if [[ $(hostname \| cut -c1-4) = hreg \|\| $(hostname \| cut -c1-4) = breg ]]
	521	then
	522	catalog_name=${catalog_name#"~/"}
	523	catalog_name=${catalog_name#"~"}
	524	fi
	525	[[ "$catalog_name" != "" ]] && catalog_name=${catalog_name}/
	526
	527
	528	# DATEI/VERZEICHNIS PER SCP UEBERTRAGEN
	529	if [[ $get = false ]]
	530	then
	531	if [[ $make_catalog != force ]]
	532	then
	533	if [[ $append = false ]]
	534	then
	535	if [[ $(echo $local_host \| cut -c1-2) = cs ]]
	536	then
	537	if [[ $catalog_copy = false ]]
	538	then
	539	scp -q -v $2 $remote_user@$1:$catalog_name$4$zyklusnr
	540	else
	541	scp -r -q -v $2 $remote_user@$1:$catalog_name$4$zyklusnr
	542	fi
	543	else
	544	if [[ $catalog_copy = false ]]
	545	then
	546	scp $2 $remote_user@$1:$catalog_name$4$zyklusnr > /dev/null
	547	else
	548	scp -r $2 $remote_user@$1:$catalog_name$4$zyklusnr > /dev/null
	549	fi
	550	fi
	551	scp_status=$?
	552
	553	if [[ $scp_status != 0 ]]
	554	then
	555	# CHECK, OB DATEIGROESSEN AUF LOKALEM UND REMOTERECHNER
	556	# UEBEREINSTIMMEN
	557	local_size=`ls -al $2`
	558	local_size=`echo $local_size \| cut -d" " -f5`
	559
	560	remote_size=`ssh $1 -l $remote_user "ls -al $catalog_name$4$zyklusnr"`
	561	remote_size=`echo $remote_size \| cut -d" " -f5`
	562
	563	if [[ "$remote_size" != "$local_size" ]]
	564	then
	565	echo " +++ scp failed on host \"$local_host\" with exit $scp_status"
	566	echo " local size = \"$local_size\" remote size = \"$remote_size\" "
	567	date
	568	locat=scp_failed; exit
	569	fi
	570	fi
	571	else
	572	scp $2 $remote_user@$1:${catalog_name}batch_scp_append_file.$random > /dev/null
	573	if [[ $? != 0 ]]
	574	then
	575	# CHECK, OB DATEIGROESSEN AUF LOKALEM UND REMOTERECHNER
	576	# UEBEREINSTIMMEN
	577	local_size=`ls -al $2`
	578	local_size=`echo $local_size \| cut -d" " -f5`
	579
	580	remote_size=`ssh $1 -l $remote_user "ls -al ${catalog_name}batch_scp_append_file.$random"`
	581	remote_size=`echo $remote_size \| cut -d" " -f5`
	582
	583	if [[ "$remote_size" != "$local_size" ]]
	584	then
	585	echo " +++ scp failed on host \"$local_host\" with exit $scp_status"
	586	echo " local size = \"$local_size\" remote size = \"$remote_size\" "
	587	date
	588	locat=scp_for_append_failed; exit
	589	fi
	590	fi
	591
	592	rm $filelist
	593
	594	ssh $1 -l $remote_user "cd $3; cat batch_scp_append_file.$random >> $4$zyklusnr; rm batch_scp_append_file.$random; echo '*** append complete'" > $filelist
	595	if [[ $? != 0 ]]
	596	then
	597	if [[ ! -f $filelist ]]
	598	then
	599	locat=append_via_ssh_failed; exit
	600	else
	601	if [[ $(grep -c "*** append complete" $filelist) = 0 ]]
	602	then
	603	locat=append_via_ssh_failed; exit
	604	fi
	605	fi
	606	fi
	607	fi
	608	else
	609	ssh $1 -l $remote_user "mkdir -p $3"
	610	if [[ $? != 0 ]]
	611	then
	612	locat=ssh_failed_4; exit
	613	fi
	614	scp $2 $remote_user@$1:$catalog_name$4$zyklusnr > /dev/null
	615	if [[ $? != 0 ]]
	616	then
	617	locat=scp_failed; exit
	618	fi
	619	fi
	620
	621	else
	622
	623	if [[ $catalog_copy = false ]]
	624	then
	625	if [[ $quote_wait = true ]]
	626	then
	627
	628	printf " +++ quote wait not realized with BATCH_SCP"
	629	locat=unavailable_feature; exit
	630
	631	else
	632
	633	scp $remote_user@$1:$catalog_name$4$zyklusnr $2 > /dev/null
	634	if [[ $? != 0 ]]
	635	then
	636	locat=scp_failed; exit
	637	fi
	638
	639	fi
	640	else
	641
	642	printf " +++ get of whole cataloges not realized with BATCH_SCP so far"
	643	locat=unavailable_feature; exit
	644
	645	# ftp -i $1 << %END% > /dev/null
	646	#$transfermode
	647	#cd $3
	648	#mget *
	649	#quit
	650	#%END%
	651	fi
	652	fi
	653
	654
	655
	656	# EVTL. TRANSFERIERTE DATEI AUF LOKALEM RECHNER LOESCHEN
	657	if [[ $delete = true && $get = false ]]
	658	then
	659	rm -rf $2
	660	fi
	661
	662
	663
	664	# ABSCHLUSSMELDUNG
	665	if [[ $silent = false ]]
	666	then
	667	if (( maxcycle == 0 ))
	668	then
	669	if [[ $append = false ]]
	670	then
	671	printf " >>> transfer successful \n"
	672	else
	673	printf " >>> file was appended \n"
	674	fi
	675	else
	676	printf " >>> transfer successful \n"
	677	if [[ $append = false ]]
	678	then
	679	if [[ $catalog_copy = false ]]
	680	then
	681	printf " new file has cycle number $maxcycle \n"
	682	else
	683	printf " new catalog has cycle number $maxcycle \n"
	684	fi
	685	else
	686	printf " append to cycle number $maxcycle \n"
	687	fi
	688	fi
	689	fi
	690
	691	rm -rf $filelist $errfile

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format