Home

Context Navigation

batch_scp @ 164

Last change on this file since 164 was 66, checked in by raasch, 18 years ago
Rev properties set fro scripts, small adjustments for RIAM, fimm (Igor) admitted
Property svn:keywords set to `Rev`
File size: 20.9 KB

Rev	Line
[1]	1	#! /bin/ksh
	2	# batch_scp - Shellskript Version: @(#)batch_scp 1.0a 25/10/05
[66]	3	# $Id: batch_scp 54 2007-03-08 00:00:02Z raasch $
[1]	4
	5	# Prozedur zum automatischen Transfer von Dateien mittels scp
	6	#
	7	# batch_scp hat 4 Argumente:
	8	# $1 = IP-Adresse des Zielrechners
	9	# $2 = zu uebertragende Datei
	10	# $3 = Verzeichnis, in das kopiert werden soll
	11	# $4 = Dateiname der Zieldatei
	12
	13
	14	# ACHTUNG!!!!!!!!
	15	#
	16	# batch_scp hat noch folgenden grossen Mangel: wenn die Verzeichnisse
	17	# auf den jeweiligen Remote-Rechnern aeltere Dateien beinhalten,
	18	# die beim "ls -al" eine Jahreszahl und keine Uhrzeit (aa:bb) liefern,
	19	# dann kann batch_scp die Dateinamen nicht ueberpruefen und findet
	20	# z.B. bei -g die entsprechende Datei nicht!
	21	#
	22	#
	23
	24
	25	# letzte Aenderung:
	26	# 29/11/01 - Siggi - Entwicklungsbeginn
	27	# 04/01/02 - Siggi - Version 1.0 funktionsfaehig
	28	# 15/02/02 - Siggi - Verzeichnis-Listing umgestellt von "ls -al" auf "ls -1"
	29	# 30/05/02 - Siggi - Abbruch mit exit 1 bei scp- oder ssh-Fehler
	30	# 12/06/02 - Siggi - Version 1.0a, parent directories are also created, if
	31	# directory on remote host does not exist
	32	# 18/09/02 - Siggi - Fehlerabfragen korrigiert (waren wegen Klammerung
	33	# unwirksam)
	34	# 12/03/03 - Siggi - errfile and filelist are not stored in /tmp any more
	35	# errors in execution of ssh does not lead
	36	# to an abort on the NEC-system at DKRZ
	37	# 01/04/03 - Siggi - small error concerning creation of catalogs removed
	38	# 23/01/04 - Siggi - additional test output for scp on hurrikan
	39	# 02/12/04 - Siggi - additional check of file size on remote host after scp.
	40	# If the file sizes on local and remote host are equal,
	41	# the scp exit status is ignored
	42	# 03/12/04 - Siggi - additional checks of ssh actions independent of the
	43	# ssh exit status
	44	# 11/03/05 - Siggi - arguments are output in case of error exit
	45	# 25/10/05 - Siggi - put of catalogs realized
	46
	47
	48
	49	# VARIABLENVEREINBARUNGEN + DEFAULTWERTE
	50	random=$RANDOM
	51
	52	absolut=false
	53	append=false
	54	catalog_copy=false
	55	check=false
	56	delete=false
	57	errfile=ftpcopy.errfile.$random
	58	filelist=filelist.$random
	59	get=false
	60	local_host=`hostname`
	61	locat=normal
	62	make_catalog=false
	63	overwrite=false
	64	print_local_filename=false
	65	quote_wait=false
	66	remote_user=""
	67	silent=false
	68	transfermode=binary
	69	zyklusnr=""
	70	typeset -i iii icycle maxcycle=0 wait=0
	71
	72	# FEHLERBEHANDLUNG
	73	# BEI EXIT:
	74	trap 'if [[ $locat != normal ]]
	75	then
	76	cat $filelist $errfile
	77	rm -rf $filelist $errfile
	78	printf " +++ BATCH_SCP terminated \n"
	79	printf " locat = $locat \n"
	80	printf " arguments = $1 $2 $3 $4 \n\n"
	81	exit 1
	82	fi' exit
	83
	84
	85	# BEI TERMINAL-BREAK:
	86	trap 'rm -rf $filelist $errfile
	87	printf " +++ BATCH_SCP terminated \n\n"
	88	exit 1
	89	' 2
	90
	91
	92	# SHELLSCRIPT-OPTIONEN EINLESEN
	93	while getopts :aAbcCdgmnoqsu:w: option
	94	do
	95	case $option in
	96	(a) absolut=true;;
	97	(A) append=true;;
	98	(b) transfermode=binary;;
	99	(c) catalog_copy=true;;
	100	(C) check=true;;
	101	(d) delete=true;;
	102	(g) get=true;;
	103	(m) make_catalog=true;;
	104	(n) print_local_filename=true;; # Option ist nicht dokumentiert !
	105	(o) overwrite=true;;
	106	(q) quote_wait=true;;
	107	(s) silent=true;;
	108	(u) remote_user=$OPTARG;;
	109	(w) wait=$OPTARG;;
	110	(\?) printf " +++ option $OPTARG unknown \n"
	111	printf " --> call: batch_scp [-aAbcCdgmnoqsuw] <IP-adress> <localfile> <remotepath> <remotefile>\n"
	112	locat=parameter;exit;;
	113	esac
	114	done
	115	shift OPTIND-1
	116
	117
	118
	119	# KURZE AUFRUFBESCHREIBUNG WIRD HIER AUSGEGEBEN
	120	if [ "$1" = "?" ]
	121	then
	122	(printf "\n *** batch_scp can be called as follows:\n"
	123	printf "\n batch_scp -a -b -d -g -o -q -s -u.. -w.. <param1> <param2> <param3> <param4>\n"
	124	printf "\n Description of available options:\n"
	125	printf "\n Option Description Default-Value"
	126	printf "\n -a Filenames are absolute. No cycle- ---"
	127	printf "\n numbers will be determined"
	128	printf "\n -A append to destination file ---"
	129	printf "\n -b use binary-modus for transfer ASCII-modus"
	130	printf "\n -c transfer of directory ---"
	131	printf "\n -C check-Modus, no transfer ---"
	132	printf "\n -d file to be transferred will be ---"
	133	printf "\n deleted after successful transfer"
	134	printf "\n -g change of transfer direction, i.e. ---"
	135	printf "\n file will be transferred from"
	136	printf "\n destination host"
	137	printf "\n -o any existing file will be overwritten ---"
	138	printf "\n -q switch on \"quote wait\" on ---"
	139	printf "\n estination host"
	140	printf "\n -s do not display informative messages ---"
	141	printf "\n -u username on remote machine <username>"
	142	printf "\n -w waiting time in seconds, before trans- 0"
	143	printf "\n fer will be initiated"
	144	printf "\n "
	145	printf "\n The positional parameters <param1> - <param4> must be provided at"
	146	printf "\n any time and have the following meaning:"
	147	printf "\n <param1> - IP-adress of destination host"
	148	printf "\n or \"?\" (creates this outline)"
	149	printf "\n <param2> - abs. or rel. path of file to be transferred"
	150	printf "\n <param3> - directory (abs.!) on destination host. Special cahracters"
	151	printf "\n like \~ are allowed but must be quoted by \"."
	152	printf "\n <param4> - filename (without path!) on destination host; must not"
	153	printf "\n be given, if option -c is used."
	154	printf "\n When using option -g, file will be copied from destination host to file"
	155	printf "\n <param2>. In this case, no overwriting is possible.") \| more
	156	exit
	157	fi
	158
	159
	160	# PRUEFEN, OB ALLE ARGUMENTE VORLIEGEN
	161	if [[ "$1" = "" ]]
	162	then
	163	printf " +++ 1. argument missing \n"
	164	locat=argument; exit
	165	elif [[ "$2" = "" ]]
	166	then
	167	printf " +++ 2. argument missing \n"
	168	locat=argument; exit
	169	elif [[ "$3" = "" ]]
	170	then
	171	printf " +++ 3. argument missing \n"
	172	locat=argument; exit
	173	elif [[ "$4" = "" ]]
	174	then
	175	printf " +++ 4. argument missing \n"
	176	locat=argument; exit
	177	fi
	178
	179
	180	# USER-NAME AUF ZIELRECHNER AUS .NETRC-DATEI ERMITTELN
	181	if [[ -z $remote_user ]]
	182	then
	183
	184	# PRUEFEN, OB NETRC-DATEI VORHANDEN
	185	if [[ ! -f ~/.netrc ]]
	186	then
	187	printf " +++ option -u not given; \n"
	188	printf " getting remote-username from password file failed \n"
	189	printf " because ~/.netrc does not exist \n"
	190	locat=netrc; exit
	191	fi
	192	grep $1 ~/.netrc \| read dum dum dum remote_user dum dum
	193	fi
	194
	195
	196	# APPEND IST NUR BEI TRANSFER EINZELNER DATEIEN OHNE UEBERSCHREIBEN
	197	# ERLAUBT. GET IST DABEI EBENFALLS NICHT ERLAUBT
	198	if [[ $append = true && ( $get = true \|\| $catalog_copy = true \|\| $overwrite = true ) ]]
	199	then
	200	printf " +++ options -g, -c and -o are not allowed, if -A is given \n"
	201	locat=parameter; exit
	202	fi
	203
	204
	205	# DATEINAME IM 4. ARGUMENT DARF NUR BEIM UEBERSCHREIBEN ODER IM ABSOLUT-
	206	# MODUS PUNKTE ENTHALTEN
	207	if [[ $overwrite = false && $absolut = false && $(echo $4 \| grep -c "\.") != 0 ]]
	208	then
	209	printf " +++ 4th argument may only contain dots (".") , if one of the \n"
	210	printf " options -a or -o are given \n"
	211	locat=argument; exit
	212	fi
	213
	214
	215	# QUOTE WAIT FUNKTIONIERT NICHT BEIM KOPIEREN GANZER VERZEICHNISSE
	216	if [[ $quote_wait = true && $catalog_copy = true ]]
	217	then
	218	printf " +++ options -c and -q must not be used simultaneously\n"
	219	locat=parameter; exit
	220	fi
	221
	222
	223	# IM CHECK-MODUS WIRD SCRIPT HIER BEENDET
	224	[[ $check = true ]] && exit
	225
	226
	227	# BESTIMMTE ZEIT WARTEN, BIS WEITERGEMACHT WIRD (NOETIG Z.B. BEI TRANSFER
	228	# VON JOBPROTOKOLLEN AUS JOBS HERAUS)
	229	sleep $wait
	230
	231
	232	# PRUEFEN, OB LOKALE DATEI/LOKALES VERZEICHNIS VORHANDEN BZW. NICHT VORHANDEN
	233	if [[ $get = false ]]
	234	then
	235	if [[ $catalog_copy = false ]]
	236	then
	237	if [[ ! -f $2 ]]
	238	then
	239	printf " +++ file \"$2\" to be transferred does not exist \n"
	240	locat=localfile; exit
	241	fi
	242	else
	243	if [[ ! -d $2 ]]
	244	then
	245	printf " +++ directory \"$2\" to be transferred does not exist\n"
	246	printf " or is not a directory \n"
	247	locat=localfile; exit
	248	fi
	249	fi
	250	else
	251	if [[ $catalog_copy = false ]]
	252	then
	253	if [[ -f $2 ]]
	254	then
	255	if [[ $overwrite = true ]]
	256	then
	257	rm $2
	258	else
	259	printf " +++ local file \"$2\" is already existing \n"
	260	locat=localfile; exit
	261	fi
	262	else
	263
	264	# PRUEFEN, OB SICH LOKALE DATEI ANLEGEN LAESST
	265	local_dirname=`dirname $2`
	266	if [[ ! -d $local_dirname ]]
	267	then
	268	printf " +++ local directory \"$local_dirname\" \n"
	269	printf " does not exist or is not a directory \n"
	270	printf " +++ cannot copy file \"$3/$4\" \n"
	271	printf " from \"$1\" to \"$local_host\" \n"
	272	locat=localfile; exit
	273	fi
	274	fi
	275	else
	276	if [[ -d $2 \|\| -f $2 ]]
	277	then
	278	printf " +++ local directory \"$2\" is already existing, \n"
	279	printf " or a file with the same name exists \n"
	280	locat=localfile; exit
	281	fi
	282	fi
	283	fi
	284
	285
	286	# VERZEICHNISLSTE DES ZIELRECHNERS ERSTELLEN
	287	ssh $1 -l $remote_user "cd $3; ls -1; echo '*** list complete'" > $filelist 2>&1
	288	ssh_status=$?
	289
	290	if [[ $ssh_status != 0 ]]
	291	then
	292	if [[ ! -f $filelist ]]
	293	then
	294	echo " local_host = $local_host ssh_status = $ssh_status"
	295	locat=ssh_failed_1; exit
	296	else
	297	if [[ $(grep -c "*** list complete" $filelist) = 0 ]]
	298	then
	299	echo " local_host = $local_host ssh_status = $ssh_status"
	300	locat=ssh_failed_2; exit
	301	fi
	302	fi
	303	fi
	304
	305
	306	# PRUEFEN, OB VERZEICHNIS VORHANDEN IST. WENN GANZES VERZEICHNISS ZUM
	307	# ZIELRECHNER KOPIERT WERDEN SOLL, DARF DORT NOCH KEIN ENTSPRECHENDES
	308	# VERZEICHNIS VORHANDEN SEIN
	309	if [[ $(cat $filelist \| grep -c "not found") != 0 \|\| \
	310	$(cat $filelist \| grep -c "No such file or directory") != 0 ]]
	311	then
	312	if [[ ! ( $catalog_copy = true && $get = false ) ]]
	313	then
	314	if [[ $make_catalog = false ]]
	315	then
	316	printf " +++ directory \"$3\" does not exist on destination host (\"$1\") \n"
	317	locat=directory; exit
	318	else
	319	if [[ $silent = false ]]
	320	then
	321	printf " >>> directory \"$3\" does not exist on destination host (\"$1\")"
	322	printf "\n trying to create \"$3\" \n"
	323	fi
	324
	325	make_catalog=force
	326	fi
	327	fi
	328	fi
	329
	330
	331	# PRUEFEN, OB DATEI/VERZEICHNIS VORHANDEN, WENN JA, HOECHSTEN ZYKLUS
	332	# ERMITTELN (BZW. IM ABSOLUT-MODUS PRUEFEN, OB DATEI VORHANDEN IST)
	333	# DAS GANZE ABER NUR, WENN NICHT OVERWRITE-MODUS GEWAEHLT WURDE, DIE
	334	# EVENTUELL VORHANDENE DATEI ALSO UEBERSCHRIEBEN WERDEN SOLL
	335	found=false
	336	if [[ ( $overwrite = false && $get = false ) \|\| $get = true ]]
	337	then
	338	while read zeile
	339	do
	340	if [[ $absolut = false ]]
	341	then
	342	text=$(echo $zeile \| cut -f1 -d".")
	343	if [[ "$text" = "$4" ]]
	344	then
	345	found=true
	346	cycle=$(echo $zeile \| cut -f2 -d".")
	347	if [[ "$cycle" = "$text" ]]
	348	then
	349	(( icycle = 0 ))
	350	else
	351
	352	# PRUEFEN, OB CYCLE EINE ZAHL IST
	353	(( iii = 1 ))
	354	character=`echo $cycle \| cut -c$iii`
	355	character_found=false
	356	while [[ "$character" != "" && $character_found = false ]]
	357	do
	358	case $character in
	359	(0\|1\|2\|3\|4\|5\|6\|7\|8\|9) true;;
	360	(*) character_found=true
	361	esac
	362	(( iii = iii + 1 ))
	363	character=`echo $cycle \| cut -c$iii`
	364	done
	365
	366	if [[ $character_found = false ]]
	367	then
	368	(( icycle = $cycle ))
	369	fi
	370	fi >\|$errfile 2>&1 # AUSGABE FEHLER AUF ERRFILE WENN CYCLE NICHTNUMERISCH
	371
	372
	373	# INFORMATIVE AUSGABE, WENN DATEI NICHTNUMERISCHE EXTENSION HAT
	374	# if [[ $(cat $errfile \| grep -c "bad number") != 0 ]]
	375	if [[ $character_found = true ]]
	376	then
	377	if [[ $cycle != "$5" ]]
	378	then
	379	printf " +++ file \"$text\" has non-numerical extension \".$cycle\" \n"
	380	locat=file; exit
	381	else
	382	if [[ $silent = false ]]
	383	then
	384	printf " >>> file \"$text\" has non-numerical extension \".$cycle\" \n"
	385	fi
	386	fi
	387	fi
	388
	389	if (( icycle > maxcycle ))
	390	then
	391	(( maxcycle = icycle ))
	392	fi
	393	fi
	394
	395	else
	396
	397	# IM ABSOLUT-MODUS MUSS NUR GEPRUEFT WERDEN, OB DIE DATEI
	398	# VORHANDEN IST
	399	[[ $4 = $zeile ]] && found=true
	400	fi
	401
	402	done <$filelist
	403	fi
	404
	405	if [[ $found = true ]]
	406	then
	407	if [[ $get = false ]]
	408	then
	409	if [[ $absolut = false ]]
	410	then
	411	if [[ $append = false ]]
	412	then
	413	(( maxcycle = maxcycle + 1 ))
	414	zyklusnr=".$maxcycle"
	415	else
	416	if (( maxcycle == 0 ))
	417	then
	418	zyklusnr=""
	419	else
	420	zyklusnr=".$maxcycle"
	421	fi
	422	fi
	423	else
	424	if [[ $overwrite = false ]]
	425	then
	426	printf " +++ file \"$3/$4\" \n"
	427	printf " already exists on destination host (use -o, if necessary) \n"
	428	locat=file; exit
	429	fi
	430	fi
	431	else
	432	if [[ $absolut = false ]]
	433	then
	434	if (( maxcycle == 0 ))
	435	then
	436	zyklusnr=""
	437	else
	438	zyklusnr=".$maxcycle"
	439	(( maxcycle = 0 ))
	440	fi
	441	else
	442	zyklusnr=""
	443	fi
	444	fi
	445	else
	446	zyklusnr=""
	447
	448	# ABBRUCH, WENN DATEI VON ZIELRECHNER GEHOLT WERDEN SOLL, DORT ABER
	449	# NICHT VORHANDEN IST
	450	if [[ $get = true ]]
	451	then
	452	printf " +++ file \"$3/$4\" \n"
	453	printf " does not exist on destination host (\"$1\") \n"
	454	locat=remotefile; exit
	455	fi
	456	fi
	457
	458
	459	# FALLS KATALOG ERZEUGT WIRD, DARF DIE DATEI IN KEINEM FALL EINE
	460	# ZYKLUSNUMMER BESITZEN, DA SIE JA NOCh GARNICHT EXISTIEREN KANN
	461	if [[ $make_catalog = force ]]
	462	then
	463	zyklusnr=""
	464	(( maxcycle = 0 ))
	465	fi
	466
	467
	468	# FALLS NAMENSOPTION (-n) GEWAEHLT WURDE, NUR DEN ERMITTELTEN LOKALEN
	469	# DATEINAMEN DES ZIELRECHNERS AUSGEBEN UND SCRIPT BEENDEN
	470	if [[ $print_local_filename = true ]]
	471	then
	472	printf "$4$zyklusnr\n"
	473	rm -r $filelist
	474	exit
	475	fi
	476
	477
	478	# FALLS 5. ARGUMENT ANGEGEBEN WURDE, WIRD DIES ALS FILE-EXTENSION
	479	# HINTER DIE ZYKLUS-NUMMER GEHAENGT (FUNKTIONIERT NUR BEI KOPIEREN EINER
	480	# DATEI AUF ZIELRECHNER
	481	if [[ "$5" != "" && $get = false ]]
	482	then
	483	zyklusnr=${zyklusnr}.$5
	484	fi
	485
	486
	487	# BEI VERZEICHNISTRANSFER VON ZIELRECHNER AUF LOKALEN RECHNER PRUEFEN, OB
	488	# $3 AUF ZIELRECHNER WIRKLICH EIN VERZEICHNIS IST
	489	if [[ $catalog_copy = true && $get = true ]]
	490	then
	491	rm -rf $filelist
	492	ssh $1 -l $remote_user "cd $3" > $filelist
	493	if [[ $? != 0 ]]
	494	then
	495	locat=ssh_failed_3; exit
	496	fi
	497
	498	if [[ $(cat $filelist \| grep -c "Not a directory") != 0 ]]
	499	then
	500	printf " +++ \"$3\" on destination host is not a directory \n"
	501	locat=directory; exit
	502	fi
	503	fi
	504
	505
	506	# BEI KATALOGTRANSFER AUF LOKALEN RECHNER ENTSPRECHENDES VERZEICHNIS
	507	# ANLEGEN
	508	if [[ $catalog_copy = true ]]
	509	then
	510	if [[ $get = true ]]
	511	then
	512	mkdir $2
	513	fi
	514	fi
	515
	516
	517	# Auf IBM-Rechnern (HLRN) Tilde aus Katalognamen entfernen, da scp
	518	# diese nicht versteht
	519	catalog_name=$3
	520	if [[ $(hostname \| cut -c1-4) = hreg \|\| $(hostname \| cut -c1-4) = breg ]]
	521	then
	522	catalog_name=${catalog_name#"~/"}
	523	catalog_name=${catalog_name#"~"}
	524	fi
	525	[[ "$catalog_name" != "" ]] && catalog_name=${catalog_name}/
	526
	527
	528	# DATEI/VERZEICHNIS PER SCP UEBERTRAGEN
	529	if [[ $get = false ]]
	530	then
	531	if [[ $make_catalog != force ]]
	532	then
	533	if [[ $append = false ]]
	534	then
	535	if [[ $(echo $local_host \| cut -c1-2) = cs ]]
	536	then
	537	if [[ $catalog_copy = false ]]
	538	then
	539	scp -q -v $2 $remote_user@$1:$catalog_name$4$zyklusnr
	540	else
	541	scp -r -q -v $2 $remote_user@$1:$catalog_name$4$zyklusnr
	542	fi
	543	else
	544	if [[ $catalog_copy = false ]]
	545	then
	546	scp $2 $remote_user@$1:$catalog_name$4$zyklusnr > /dev/null
	547	else
	548	scp -r $2 $remote_user@$1:$catalog_name$4$zyklusnr > /dev/null
	549	fi
	550	fi
	551	scp_status=$?
	552
	553	if [[ $scp_status != 0 ]]
	554	then
	555	# CHECK, OB DATEIGROESSEN AUF LOKALEM UND REMOTERECHNER
	556	# UEBEREINSTIMMEN
	557	local_size=`ls -al $2`
	558	local_size=`echo $local_size \| cut -d" " -f5`
	559
	560	remote_size=`ssh $1 -l $remote_user "ls -al $catalog_name$4$zyklusnr"`
	561	remote_size=`echo $remote_size \| cut -d" " -f5`
	562
	563	if [[ "$remote_size" != "$local_size" ]]
	564	then
	565	echo " +++ scp failed on host \"$local_host\" with exit $scp_status"
	566	echo " local size = \"$local_size\" remote size = \"$remote_size\" "
	567	date
	568	locat=scp_failed; exit
	569	fi
	570	fi
	571	else
	572	scp $2 $remote_user@$1:${catalog_name}batch_scp_append_file.$random > /dev/null
	573	if [[ $? != 0 ]]
	574	then
	575	# CHECK, OB DATEIGROESSEN AUF LOKALEM UND REMOTERECHNER
	576	# UEBEREINSTIMMEN
	577	local_size=`ls -al $2`
	578	local_size=`echo $local_size \| cut -d" " -f5`
	579
	580	remote_size=`ssh $1 -l $remote_user "ls -al ${catalog_name}batch_scp_append_file.$random"`
	581	remote_size=`echo $remote_size \| cut -d" " -f5`
	582
	583	if [[ "$remote_size" != "$local_size" ]]
	584	then
	585	echo " +++ scp failed on host \"$local_host\" with exit $scp_status"
	586	echo " local size = \"$local_size\" remote size = \"$remote_size\" "
	587	date
	588	locat=scp_for_append_failed; exit
	589	fi
	590	fi
	591
	592	rm $filelist
	593
	594	ssh $1 -l $remote_user "cd $3; cat batch_scp_append_file.$random >> $4$zyklusnr; rm batch_scp_append_file.$random; echo '*** append complete'" > $filelist
	595	if [[ $? != 0 ]]
	596	then
	597	if [[ ! -f $filelist ]]
	598	then
	599	locat=append_via_ssh_failed; exit
	600	else
	601	if [[ $(grep -c "*** append complete" $filelist) = 0 ]]
	602	then
	603	locat=append_via_ssh_failed; exit
	604	fi
	605	fi
	606	fi
	607	fi
	608	else
	609	ssh $1 -l $remote_user "mkdir -p $3"
	610	if [[ $? != 0 ]]
	611	then
	612	locat=ssh_failed_4; exit
	613	fi
	614	scp $2 $remote_user@$1:$catalog_name$4$zyklusnr > /dev/null
	615	if [[ $? != 0 ]]
	616	then
	617	locat=scp_failed; exit
	618	fi
	619	fi
	620
	621	else
	622
	623	if [[ $catalog_copy = false ]]
	624	then
	625	if [[ $quote_wait = true ]]
	626	then
	627
	628	printf " +++ quote wait not realized with BATCH_SCP"
	629	locat=unavailable_feature; exit
	630
	631	else
	632
	633	scp $remote_user@$1:$catalog_name$4$zyklusnr $2 > /dev/null
	634	if [[ $? != 0 ]]
	635	then
	636	locat=scp_failed; exit
	637	fi
	638
	639	fi
	640	else
	641
	642	printf " +++ get of whole cataloges not realized with BATCH_SCP so far"
	643	locat=unavailable_feature; exit
	644
	645	# ftp -i $1 << %END% > /dev/null
	646	#$transfermode
	647	#cd $3
	648	#mget *
	649	#quit
	650	#%END%
	651	fi
	652	fi
	653
	654
	655
	656	# EVTL. TRANSFERIERTE DATEI AUF LOKALEM RECHNER LOESCHEN
	657	if [[ $delete = true && $get = false ]]
	658	then
	659	rm -rf $2
	660	fi
	661
	662
	663
	664	# ABSCHLUSSMELDUNG
	665	if [[ $silent = false ]]
	666	then
	667	if (( maxcycle == 0 ))
	668	then
	669	if [[ $append = false ]]
	670	then
	671	printf " >>> transfer successful \n"
	672	else
	673	printf " >>> file was appended \n"
	674	fi
	675	else
	676	printf " >>> transfer successful \n"
	677	if [[ $append = false ]]
	678	then
	679	if [[ $catalog_copy = false ]]
	680	then
	681	printf " new file has cycle number $maxcycle \n"
	682	else
	683	printf " new catalog has cycle number $maxcycle \n"
	684	fi
	685	else
	686	printf " append to cycle number $maxcycle \n"
	687	fi
	688	fi
	689	fi
	690
	691	rm -rf $filelist $errfile

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format