Home

Context Navigation

ncl_preferences.ncl @ 259

Last change on this file since 259 was 236, checked in by letzel, 16 years ago
NCL scripts in trunk/SCRIPTS/NCL updated
File size: 65.7 KB

Rev	Line
[190]	1	begin
	2
	3	;*********************************************************
[194]	4
	5	script=which_script
[190]	6
	7	;*********************************************************
[194]	8
[190]	9	;******************************************************
	10	; parameters used by CROSS_SECTIONS
	11	;******************************************************
	12
[194]	13	if (script .EQ. "cross_section")then
[190]	14
	15	;***************************************************
	16	; REQUIRED --file_1-- INPUT FILE
	17	;
[218]	18	; input file produced by PALM; if there is more than one file for all timesteps of a job chain,
	19	; declare path and file name without cycle number and ".nc" (first and last cycle numbers are given with the parameters 'start_f' and 'end_f');
	20	; otherwise declare path and full file name
[190]	21	;
	22	; data type: string
	23	;
[218]	24	; example: file_1 = "/path_to_file/file_xy_av" if you use more than one cycle number
	25	; file_1 = "/path_to_file/file_xy_av.4.nc" if you use one file (e.g. with cycle number 4)
	26	;
[190]	27	; default: "File in"
	28	;***************************************************
	29	if(.not. isvar("file_1"))then
[194]	30
	31
[236]	32	file_1 = "File in"
[190]	33
[194]	34
[190]	35	end if
	36	;***************************************************
[218]	37	; REQUIRED if more than one file of a job chain --start_f-- START OF CYCLIC NUMBER
[190]	38	;
[218]	39	; if there is more than one file for all timesteps of a job chain, declare the first cyclicnumber which contains timesteps you'd like to use
	40	;
	41	; data type: integer
	42	;
[236]	43	; example: start_f = 3 (if first file: example_xy_av.3.nc) and 0 (if first file: example_xy_av.nc)
[218]	44	;
	45	; default: -1
	46	;***************************************************
	47	if (.not. isvar("start_f"))then
	48
	49
	50	start_f = -1
	51
	52
	53	end if
	54	;***************************************************
	55	; REQUIRED if more than one file of a job chain --end_f-- END OF CYCLIC NUMBER
	56	;
	57	; if there is more than one file for all timesteps of a job chain, declare the last cyclicnumber which contains timesteps you'd like to use
	58	;
	59	; data type: integer
	60	;
[236]	61	; example: end_f = 48 (if last file: example_xy_av.48.nc) and 0 (if last file: example_xy_av.nc)
[218]	62	;
	63	; default: -1
	64	;***************************************************
	65	if (.not. isvar("end_f"))then
	66
	67
	68	end_f = -1
	69
	70
	71	end if
	72	;***************************************************
	73	; REQUIRED --xyc--xzc--yzc-- SELECTION of XY or XZ or YZ CROSS SECTIONS
	74	;
[190]	75	; desired section has to be set to 1; e.g.: xyc=1, xzc=0 and yzc=0 for xy-section
	76	;
	77	; data type: integer
	78	;
[218]	79	; example: xyc = 1
	80	; xzc = 0
	81	; yzc = 0
	82	;
[190]	83	; default: 0
	84	;***************************************************
	85	if(.not. isvar("xyc"))then
	86
	87	xyc = 0
	88
	89	end if
	90	if (.not. isvar("xzc"))then
	91
	92	xzc = 0
	93
	94	end if
	95	if (.not. isvar("yzc"))then
	96
	97	yzc = 0
	98
	99	end if
	100	;***************************************************
	101	; OPTIONAL --format_out-- OUTPUT FORMAT
	102	;
[218]	103	; format of the output file; supported file formats: x11, pdf, ps, eps, epsi or ncgm
[190]	104	;
	105	; data type: string
	106	;
[218]	107	; example: format_out = "pdf"
	108	;
[190]	109	; default: "x11"
	110	;***************************************************
	111	if(.not. isvar("format_out"))then
	112
	113
	114	format_out = "x11"
	115
	116
	117	end if
	118	;***************************************************
	119	; OPTIONAL --file_out-- OUTPUT FILE
	120	;
[218]	121	; path and name of the output file
[190]	122	;
	123	; data type: string
	124	;
[218]	125	; example: file_out = "/home/path_to_output/test_cs"
	126	;
[194]	127	; default: "~/test_cs"
[190]	128	;***************************************************
	129	if(.not. isvar("file_out"))then
	130
	131
	132	file_out = "~/test_cs"
	133
	134
	135	end if
	136	;***************************************************
[218]	137	; OPTIONAL --no_columns-- NUMBER OF COLUMNS
[190]	138	;
	139	; number of plots in one row
	140	;
	141	; data type: integer
[218]	142	;
	143	; example: no_columns = 1
[190]	144	;
	145	; default: 1
	146	;***************************************************
	147	if(.not. isvar("no_columns"))then
	148
	149
	150	no_columns = 1
	151
	152
	153	end if
	154	;***************************************************
[218]	155	; OPTIONAL --no_rows-- NUMBER OF ROWS
[190]	156	;
	157	; number of plots in one column
	158	;
	159	; data type: integer
[218]	160	;
	161	; example: no_rows = 2
[190]	162	;
	163	; default: 2
	164	;***************************************************
[218]	165	if(.not. isvar("no_rows"))then
[190]	166
	167
[218]	168	no_rows = 2
[190]	169
	170
	171	end if
	172	;***************************************************
	173	; OPTIONAL --sort-- TYPE OF SORTING
	174	;
	175	; sequence of plots; sorting either by time step [="time"] or by layer/height [="layer"]
	176	;
	177	; data type: string
	178	;
[218]	179	; example: sort = "layer"
	180	;
[190]	181	; default: "layer"
	182	;***************************************************
	183	if(.not. isvar("sort"))then
	184
	185
	186	sort = "layer"
	187
	188
	189	end if
	190	;***************************************************
	191	; OPTIONAL --var-- OUTPUT VARIABLES
	192	;
[218]	193	; names of output variables; inidcate them with one comma before and after each variable
[190]	194	;
	195	; data type: string
[218]	196	;
	197	; example: var = ",u,v,w"
[190]	198	;
[218]	199	; default: "all" (all available variables are plotted)
[190]	200	;***************************************************
	201	if(.not. isvar("var"))then
	202
	203
	204	var = "all"
	205
	206
	207	end if
	208	;***************************************************
	209	; OPTIONAL --start_time_step-- FIRST TIME STEP
	210	;
[218]	211	; first time step of plot; there is no need to specify a precise time value from the input file,
	212	; 'start_time_step' is rounded to the next existent time step
[190]	213	;
	214	; data type: double; dimension: [hour]
	215	;
[218]	216	; example: start_time_step = 0.5
	217	;
[190]	218	; default: -1.d (first available time step)
	219	;***************************************************
	220	if(.not. isvar("start_time_step"))then
	221
	222
	223	start_time_step = -1.d
	224
	225
	226	end if
	227	;***************************************************
	228	; OPTIONAL --end_time_step-- LAST TIME STEP
	229	;
[218]	230	; last time step of plot; there is no need to specify a precise time value from the input file,
	231	; 'end_time_step' is rounded to the next existent time step
[190]	232	;
	233	; data type: double; dimension: [hour]
	234	;
[218]	235	; example: end_time_step = 2.0
	236	;
[190]	237	; default: -1.d (last available time step)
	238	;***************************************************
	239	if(.not. isvar("end_time_step"))then
	240
	241
	242	end_time_step = -1.d
	243
	244
	245	end if
	246	;***************************************************
	247	; OPTIONAL --xs-- MINIMUM X-AXIS
	248	;
	249	; value for minimum of x-axis, selectable if there are NO preseted layers for x (as for XY or XZ 2D-DATA);
[218]	250	; there is no need to specify a precise meter value from the input file, it is rounded to the next existent value
[190]	251	;
	252	; data type: double; dimension: [meter]
	253	;
[218]	254	; example: xs = 150.0
	255	;
[190]	256	; default: -1.d (minimum of range)
	257	;***************************************************
	258	if(.not. isvar("xs"))then
	259
	260
	261	xs = -1.d
	262
	263
	264	end if
	265	;***************************************************
	266	; OPTIONAL --xe-- MAXIMUM X-AXIS
	267	;
	268	; value for maximum of x-axis, selectable if there are NO preseted layers for x (as for XY or XZ 2D-DATA);
[218]	269	; there is no need to specify a precise meter value from the input file, it is rounded to the next existent value
[190]	270	;
	271	; data type: double; dimension: [meter]
	272	;
[218]	273	; example: xe = 300.0
	274	;
[190]	275	; default: -1.d (maximum of range)
	276	;***************************************************
	277	if(.not. isvar("xe"))then
	278
	279
	280	xe = -1.d
	281
	282
	283	end if
	284	;***************************************************
	285	; OPTIONAL --ys-- MINIMUM Y-AXIS
	286	;
	287	; value for minimum of y-axis, selectable if there are NO preseted layers for y (as for XY or YZ 2D-DATA);
[218]	288	; there is no need to specify a precise meter value from the input file, it is rounded to the next existent value
[190]	289	;
	290	; data type: double; dimension: [meter]
	291	;
[218]	292	; example: ys = 150.0
	293	;
[190]	294	; default: -1.d (minimum of range)
	295	;***************************************************
	296	if(.not. isvar("ys"))then
	297
	298
	299	ys = -1.d
	300
	301
	302	end if
	303	;***************************************************
	304	; OPTIONAL --ye-- MAXIMUM Y-AXIS
	305	;
	306	; value for maximum of y-axis, selectable if there are NO preseted layers for y (as for XY or YZ 2D-DATA);
[218]	307	; there is no need to specify a precise meter value from the input file, it is rounded to the next existent value
[190]	308	;
	309	; data type: double; dimension: [meter]
	310	;
[218]	311	; example: ye = 300.0
	312	;
[190]	313	; default: -1.d (maximum of range)
	314	;***************************************************
	315	if(.not. isvar("ye"))then
	316
	317
	318	ye = -1.d
	319
	320
	321	end if
	322	;***************************************************
	323	; OPTIONAL --zs-- MINIMUM Z-AXIS
	324	;
[194]	325	; index for minimum of z-axis, selectable if there are NO preseted layers for z (as for XZ or YZ 2D-DATA);
	326	; you cannot specify a meter value from the input file due to grid stretching
[190]	327	;
	328	; data type: integer
	329	;
[218]	330	; example: zs = 0
	331	;
[190]	332	; default: -1 (minimum of range)
	333	;***************************************************
	334	if(.not. isvar("zs"))then
	335
	336
	337	zs = -1
	338
	339
	340	end if
	341	;***************************************************
	342	; OPTIONAL --ze-- MAXIMUM Z-AXIS
	343	;
[194]	344	; index for maximum of z-axis, selectable if there are NO preseted layers for z (as for XZ or YZ 2D-DATA);
	345	; you cannot specify a meter value from the input file due to grid stretching
[190]	346	;
	347	; data type: integer
	348	;
[218]	349	; example: ze = 15
	350	;
[190]	351	; default: -1 (maximum of range)
	352	;***************************************************
	353	if(.not. isvar("ze"))then
	354
	355
	356	ze = -1
	357
	358
	359	end if
	360	;***************************************************
	361	; OPTIONAL --mode-- TYPE OF PLOT
	362	;
	363	; isoline plots [="Line"], contour plots [="Fill"] or both [="Both"] can be choosen
	364	;
	365	; data type: string
	366	;
[218]	367	; example: mode = "Fill"
	368	;
[190]	369	; default: "Fill"
	370	;***************************************************
	371	if(.not. isvar("mode"))then
	372
	373
	374	mode = "Fill"
	375
	376
	377	end if
	378	;***************************************************
	379	; OPTIONAL --fill_mode-- TYPE OF FILLING
	380	;
	381	; area fill [="AreaFill"], raster fill [="RasterFill"] or cell fill [="CellFill"] can be choosen
	382	;
	383	; data type: string
	384	;
[218]	385	; example: fill_mode = "AreaFill"
	386	;
[190]	387	; default: "AreaFill"
	388	;***************************************************
	389	if(.not. isvar("fill_mode"))then
	390
	391
	392	fill_mode = "AreaFill"
	393
	394
	395	end if
	396	;***************************************************
	397	; OPTIONAL --shape-- ASPECT RATIO
	398	;
[218]	399	; aspect ratio of axis is kept [=1] or not[=0]
[190]	400	;
	401	; data type: integer
	402	;
[218]	403	; example: shape = 1
	404	;
[190]	405	; default: 1
	406	;***************************************************
	407	if(.not. isvar("shape"))then
	408
	409
	410	shape = 1
	411
	412
[218]	413	end if
[190]	414	;***************************************************
[218]	415	; OPTIONAL --font_size-- FONT SIZE OF STRINGS
	416	;
	417	; font size can be changed to fit to the current plot
	418	;
	419	; data type: float
	420	;
	421	; example: font_size = 0.04
	422	;
	423	; default: 0.04
	424	;***************************************************
	425	if(.not. isvar("font_size"))then
	426
	427
	428	font_size = 0.04
	429
	430
	431	end if
	432	;***************************************************
	433	; OPTIONAL --font_size_legend-- FONT SIZE OF LEGEND STRINGS
	434	;
	435	; font size of the legend can be changed to fit to the current plot
	436	;
	437	; data type: float
	438	;
	439	; example: font_size_legend = 0.02
	440	;
	441	; default: 0.02
	442	;***************************************************
	443	if(.not. isvar("font_size_legend"))then
	444
	445
	446	font_size_legend = 0.02
	447
	448
	449	end if
	450	;***************************************************
	451	; OPTIONAL --legend_label_stride-- REDUCTION OF THE NUMBER OF LABELS IN THE LEGEND
	452	;
	453	; if legend_label_stride is set to 1 every label is shown; if set to 2 every second,...
	454	;
	455	; data type: integer
	456	;
	457	; example: legend_label_stride = 2
	458	;
	459	; default: 2
	460	;***************************************************
	461	if(.not. isvar("legend_label_reduction"))then
	462
	463
	464	legend_label_stride = 2
	465
	466
	467	end if
	468	;***************************************************
	469	; OPTIONAL --axes_explicit-- EXPLICIT SETTINGS OF X- AND Y-AXES ARE SWITCHED ON
	470	;
	471	; to use several parameters to set up the axes, 'axes_explicit' must be switched [=1]; if switched off [=0] units of axes are [gridpoints]
	472	;
	473	; data type: integer
	474	;
	475	; example: axes_explicit = 0
	476	;
	477	; default: 0
	478	;***************************************************
	479	if(.not. isvar("axes_explicit"))then
	480
	481
	482	axes_explicit = 0
	483
	484
	485	end if
	486	;***************************************************
	487	; OPTIONAL if axes_explicit = 1 --major_ticks_x-- NUMBER OF MAJOR TICK MARKS AT X-AXIS
	488	;
	489	; major_ticks_x can be set to any integer, best segmentation of x-axis can be achieved, if
	490	; (number of gripdpoints in x-direction)/(major_ticks_x-1)=INTEGER, e.g. 128/8 = 16 -> major_ticks_x should be set to 9
	491	;
	492	; data type: integer
	493	;
	494	; example: major_ticks_x = 6
	495	;
	496	; default: 6
	497	;***************************************************
	498	if(.not. isvar("major_ticks_x"))then
	499
	500
	501	major_ticks_x = 6
	502
	503
	504	end if
	505	;***************************************************
	506	; OPTIONAL if axes_explicit = 1 --major_ticks_y-- NUMBER OF MAJOR TICK MARKS AT Y-AXIS
	507	;
	508	; major_ticks_y can be set to any integer, best segmentation of y-axis can be achieved, if
	509	; (number of gripdpoints in y-direction)/(major_ticks_y-1)=INTEGER, e.g. 128/8 = 16 -> major_ticks_y should be set to 9
	510	;
	511	; data type: integer
	512	;
	513	; example: major_ticks_y = 6
	514	;
	515	; default: 6
	516	;***************************************************
	517	if(.not. isvar("major_ticks_y"))then
	518
	519
	520	major_ticks_y = 6
	521
	522
	523	end if
	524	;***************************************************
	525	; OPTIONAL if axes_explicit = 1 --norm_x--norm_y--norm_z-- NORMALISE X-, Y- and Z-AXES
	526	;
	527	; normalising the axes with the given value; units can explicitly set; by default no normalising is used and units are [meter]
	528	;
	529	; data type: float
	530	;
	531	; default: 1.
	532	;***************************************************
	533	if(.not. isvar("norm_x"))then
	534
	535	norm_x = 1.
	536
	537	end if
	538	if(.not. isvar("norm_y"))then
	539
	540	norm_y = 1.
	541
	542	end if
	543	if(.not. isvar("norm_z"))then
	544
	545	norm_z = 1.
	546
	547	end if
	548	;***************************************************
	549	; OPTIONAL if axes_explicit = 1 --unit_x--unit_y--unit_z-- UNITS OF X-, Y- and Z-AXES
	550	;
	551	; units of the axes can be set; by default no units are given, if norm_x, norm_y or norm_z are unequal 1., otherwise units are [meter]
	552	;
	553	; data type: string,
	554	;
	555	; example: unit_x = "m/s"
	556	;
	557	; default: " "
	558	;***************************************************
	559	if(.not. isvar("unit_x"))then
	560
	561	unit_x = " "
	562
	563	end if
	564	if(.not. isvar("unit_y"))then
	565
	566	unit_y = " "
	567
	568	end if
	569	if(.not. isvar("unit_z"))then
	570
	571	unit_z = " "
	572
	573	end if
	574	;***************************************************
[190]	575	; OPTIONAL --vector-- VECTOR PLOT
	576	;
[218]	577	; a vector plot for one defined vector is switched on [=1] or off [=0]
[190]	578	;
	579	; data type: integer
	580	;
[218]	581	; example: vector = 0
	582	;
[190]	583	; default: 0
	584	;***************************************************
	585	if(.not. isvar("vector"))then
	586
	587
	588	vector = 0
	589
	590
	591	end if
	592	;***************************************************
	593	; REQUIRED IF vector=1 --vec1, vec2-- VECTOR FOR VECTOR PLOT
	594	;
	595	; variables for the vector, vec1 hast to be set to component 1 and vec2 to component 2;
[218]	596	; inidcate them with one comma before and after each variable;
[190]	597	;
	598	; data type: string
	599	;
[218]	600	; example: vec1=",u,"
	601	; vec2=",v,"
	602	;
[190]	603	; default: vec1 = "component1", vec2 = "component2"
	604	;***************************************************
	605	if(.not. isvar("vec1"))then
	606
	607	vec1 = "component1"
	608
	609	end if
	610	if (.not. isvar("vec2"))then
	611
	612	vec2 = "component2"
	613
	614	end if
	615	;***************************************************
	616	; OPTIONAL --plotvec-- VARIABLE FOR EXTRA VECTOR PLOT
	617	;
[218]	618	; the vector plot can be combined with other plots of variables; if this is desired inidcate the variables,
	619	; where a vector plot shall overlay; inidcate them with one comma before and after each variable
[190]	620	;
	621	; data type: string
	622	;
[218]	623	; example: plotvec = ",u,w,"
	624	;
	625	; default: "plotvec" (no combining, the vector plot is created seperately)
[190]	626	;***************************************************
	627	if(.not. isvar("plotvec"))then
	628
	629
	630	plotvec = "plotvec"
	631
	632
	633	end if
	634	;***************************************************
	635	; OPTIONAL --ref_mag-- REFERENCE VECTOR
	636	;
	637	; length of the reference vector in a vector plot
	638	;
	639	; data type: float
	640	;
[218]	641	; example: ref_mag = 0.05
	642	;
[190]	643	; default: 0.05
	644	;***************************************************
	645	if(.not. isvar("ref_mag"))then
	646
	647
	648	ref_mag = 0.05
	649
	650
	651	end if
	652	;***************************************************
[194]	653
[190]	654	end if
	655
	656	;******************************************************
	657	; parameters used by PROFILES
	658	;******************************************************
	659
[194]	660	if (script .EQ. "profiles")then
	661
[190]	662	;***************************************************
[218]	663	; REQUIRED --file_1-- 1ST INPUT FILE
[190]	664	;
[218]	665	; 1st input file produced by PALM; if there is more than one file for all timesteps of a job chain,
	666	; declare path and file name without cycle number and ".nc" (first and last cycle numbers are given with the parameters 'start_f' and 'end_f');
	667	; otherwise declare path and full file name
[190]	668	;
	669	; data type: string
	670	;
[218]	671	; example: file_1 = "/path_to_file/file_pr" if you use more than one cycle number
	672	; file_1 = "/path_to_file/file_pr.4.nc" if you use one file (e.g. with cycle number 4)
	673	;
[190]	674	; default: "File in"
	675	;***************************************************
[218]	676	if(.not. isvar("file_1"))then
	677
	678
	679	file_1 = "File in"
	680
	681
	682	end if
	683	;***************************************************
	684	; REQUIRED --start_f_1-- START OF CYCLIC NUMBER OF THE 1ST INPUT FILE
	685	;
	686	; if there is more than one file for all timesteps of a job chain, declare the first cyclicnumber which contains timesteps you'd like to use
	687	;
	688	; data type: integer
	689	;
[236]	690	; example: 3 (if first file: example_pr.3.nc) and 0 (if first file: example_pr.nc)
[218]	691	;
	692	; default: -1
	693	;***************************************************
	694	if (.not. isvar("start_f_1"))then
[190]	695
[218]	696
	697	start_f_1 = -1
	698
	699
	700	end if
	701	;***************************************************
	702	; REQUIRED --end_f_1-- END OF CYCLIC NUMBER OF THE 1ST INPUT FILE
	703	;
	704	; if there is more than one file for all timesteps of a job chain, declare the last cyclicnumber which contains timesteps you'd like to use
	705	;
	706	; data type: integer
	707	;
[236]	708	; example: 48 (if last file: example_pr.48.nc) and 0 (if last file: example_pr.nc)
[218]	709	;
	710	; default: -1
	711	;***************************************************
	712	if (.not. isvar("end_f_1"))then
[190]	713
[218]	714
[236]	715	end_f_1 = -1
[190]	716
	717
	718	end if
	719	;***************************************************
	720	; REQUIRED --prof3d-- 3D OR PROFILE DATA
	721	;
	722	; must be switched on [=1] if 3D data are used or switched off [=0] if profile data are used for profiles
	723	;
	724	; data type: integer
	725	;
	726	; default: -1
	727	;***************************************************
	728	if (.not. isvar("prof3d"))then
	729
	730
	731	prof3d = -1
	732
	733
	734	end if
	735	;***************************************************
	736	; OPTIONAL --format_out-- OUTPUT FORMAT
	737	;
	738	; supported file formats: x11, pdf, ps, eps, epsi or ncgm
	739	;
	740	; data type: string
	741	;
	742	; default: "x11"
	743	;***************************************************
	744	if (.not. isvar("format_out"))then
	745
	746
	747	format_out = "x11"
	748
	749
	750	end if
	751	;***************************************************
	752	; OPTIONAL --file_out-- OUTPUT FILE
	753	;
[218]	754	; declare path and name of the output file
[190]	755	;
	756	; data type: string
	757	;
[194]	758	; default: "~/test_pr"
[190]	759	;***************************************************
	760	if (.not. isvar("file_out"))then
	761
	762
	763	file_out = "~/test_pr"
	764
	765
	766	end if
	767	;***************************************************
[218]	768	; OPTIONAL --no_columns-- NUMBER OF COLUMNS
[190]	769	;
	770	; number of plots in one row
	771	;
	772	; data type: integer
	773	;
	774	; default: 1
	775	;***************************************************
	776	if (.not. isvar("no_columns"))then
	777
	778
	779	no_columns = 1
	780
	781
	782	end if
	783	;***************************************************
[218]	784	; OPTIONAL --no_rows-- NUMBER OF ROWS
[190]	785	;
	786	; number of plots in one column
	787	;
	788	; data type: integer
	789	;
	790	; default: 2
	791	;***************************************************
[218]	792	if (.not. isvar("no_rows"))then
[190]	793
	794
[218]	795	no_rows = 2
[190]	796
	797
	798	end if
	799	;***************************************************
	800	; OPTIONAL --var-- OUTPUT VARIABLES
	801	;
[218]	802	; names of output variables; inidcate them with one comma before and after each variable
[190]	803	;
	804	; data type: string
[218]	805	;
	806	; example: var = ",u,v,w";
[190]	807	;
[218]	808	; default: "all" (all available variables are plotted)
[190]	809	;***************************************************
	810	if (.not. isvar("var"))then
	811
	812
	813	var = "all"
	814
	815
[219]	816	end if
	817	;***************************************************
	818	; OPTIONAL --legend-- SWITCHES ON A LEGEND
	819	;
	820	; a legend is switched on [=1] or off [=0]
	821	;
	822	; data type: integer
	823	;
	824	; example: legend = 1
	825	;
	826	; default: 1
	827	;***************************************************
	828	if (.not. isvar("legend"))then
	829
	830
[236]	831	legend = 1
[219]	832
	833
[190]	834	end if
	835	;***************************************************
	836	; OPTIONAL ---no_files-- NUMBER OF INPUT FILES
	837	;
[218]	838	; up to 6 input files of different runs can be used; all input files must contain the same variables and dimensionalties;
	839	; identical variables are merged in one plot;
[190]	840	; combining or overlaying of any variables is not feasible;
[218]	841	; an extra legend (besides the time step legend) is drawn where you can explicitily name the items
[190]	842	;
	843	; data type: integer
	844	;
	845	; default: 1
	846	;***************************************************
	847	if (.not. isvar("no_files"))then
	848
	849
	850	no_files = 1
	851
	852
	853	end if
	854	;***************************************************
	855	; OPTIONAL --name_legend_1-- 1st LEGEND ITEM
	856	;
	857	; if no_files > 1: name of 1st item in extra legend
	858	;
	859	; data type: string
	860	;
	861	; default: "File 1"
	862	;***************************************************
	863	if (.not. isvar("name_legend_1"))then
	864
	865
	866	name_legend_1 = "File 1"
	867
	868
[218]	869	end if
[190]	870	;***************************************************
[218]	871	; REQUIRED if no_files > 1 --file_2-- 2ND INPUT FILE
[190]	872	;
[218]	873	; 2nd input file produced by PALM; if there is more than one file for all timesteps of a job chain,
	874	; declare path and file name without cycle number and ".nc" (first and last cycle numbers are given with the parameters 'start_f' and 'end_f');
	875	; otherwise declare path and full file name
[190]	876	;
	877	; data type: string
	878	;
[218]	879	; example: file_2 = "/path_to_file/file_pr" if you use more than one cycle number
	880	; file_2 = "/path_to_file/file_pr.4.nc" if you use one file (e.g. with cycle number 4)
	881	;
[190]	882	; default: "File in"
	883	;***************************************************
[218]	884	if(.not. isvar("file_2"))then
	885
	886
	887	file_2 = "File in"
	888
	889
	890	end if
	891	;***************************************************
	892	; REQUIRED --start_f_2-- START OF CYCLIC NUMBER OF THE 2ND INPUT FILE
	893	;
	894	; if there is more than one file for all timesteps of a job chain, declare the first cyclicnumber which contains timesteps you'd like to use
	895	;
	896	; data type: integer
	897	;
	898	; example: 3 (if first file: example_ts.3.nc)
	899	;
	900	; default: -1
	901	;***************************************************
	902	if (.not. isvar("start_f_2"))then
[190]	903
	904
[218]	905	start_f_2 = -1
[190]	906
	907
[218]	908	end if
[190]	909	;***************************************************
[218]	910	; REQUIRED --end_f_2-- END OF CYCLIC NUMBER OF THE 2ND INPUT FILE
	911	;
	912	; if there is more than one file for all timesteps of a job chain, declare the last cyclicnumber which contains timesteps you'd like to use
	913	;
	914	; data type: integer
	915	;
	916	; example: 48 (if last file: example_ts.48.nc)
	917	;
	918	; default: -1
	919	;***************************************************
	920	if (.not. isvar("end_f_2"))then
	921
	922
	923	end_f_2 = -1
	924
	925
	926	end if
	927	;***************************************************
[190]	928	; OPTIONAL --name_legend_2-- 2nd LEGEND ITEM
	929	;
	930	; if no_files > 1: name of 2nd item in extra legend
	931	;
	932	; data type: string
	933	;
	934	; default: "File 2"
	935	;***************************************************
	936	if (.not. isvar("name_legend_2"))then
	937
	938
	939	name_legend_2 = "File 2"
	940
	941
[218]	942	end if
[190]	943	;***************************************************
[218]	944	; REQUIRED if no_files > 2 --file_3-- 3RD INPUT FILE
[190]	945	;
[218]	946	; 3rd input file produced by PALM; if there is more than one file for all timesteps of a job chain,
	947	; declare path and file name without cycle number and ".nc" (first and last cycle numbers are given with the parameters 'start_f' and 'end_f');
	948	; otherwise declare path and full file name
[190]	949	;
	950	; data type: string
	951	;
[218]	952	; example: file_3 = "/path_to_file/file_pr" if you use more than one cycle number
	953	; file_3 = "/path_to_file/file_pr.4.nc" if you use one file (e.g. with cycle number 4)
	954	;
[190]	955	; default: "File in"
	956	;***************************************************
[218]	957	if(.not. isvar("file_3"))then
	958
	959
	960	file_3 = "File in"
[190]	961
	962
[218]	963	end if
[190]	964	;***************************************************
[218]	965	; REQUIRED --start_f_3-- START OF CYCLIC NUMBER OF THE 3RD INPUT FILE
[190]	966	;
[218]	967	; if there is more than one file for all timesteps of a job chain, declare the first cyclicnumber which contains timesteps you'd like to use
[190]	968	;
[218]	969	; data type: integer
[190]	970	;
[218]	971	; example: 3 (if first file: example_ts.3.nc)
	972	;
	973	; default: -1
[190]	974	;***************************************************
[218]	975	if (.not. isvar("start_f_3"))then
[190]	976
[218]	977
	978	start_f_3 = -1
[190]	979
	980
[218]	981	end if
[190]	982	;***************************************************
[218]	983	; REQUIRED --end_f_3-- END OF CYCLIC NUMBER OF THE 3RD INPUT FILE
[190]	984	;
[218]	985	; if there is more than one file for all timesteps of a job chain, declare the last cyclicnumber which contains timesteps you'd like to use
[190]	986	;
[218]	987	; data type: integer
[190]	988	;
[218]	989	; example: 48 (if last file: example_ts.48.nc)
	990	;
	991	; default: -1
[190]	992	;***************************************************
[218]	993	if (.not. isvar("end_f_3"))then
[190]	994
[218]	995
	996	end_f_3 = -1
[190]	997
	998
[218]	999	end if
[190]	1000	;***************************************************
[218]	1001	; OPTIONAL --name_legend_3-- 3rd LEGEND ITEM
[190]	1002	;
[218]	1003	; if no_files > 2: name of 3rd item in extra legend
[190]	1004	;
	1005	; data type: string
	1006	;
[218]	1007	; default: "File 3"
[190]	1008	;***************************************************
[218]	1009	if (.not. isvar("name_legend_3"))then
[190]	1010
[218]	1011
	1012	name_legend_3 = "File 3"
[190]	1013
	1014
[218]	1015	end if
[190]	1016	;***************************************************
[218]	1017	; REQUIRED if no_files > 3 --file_4-- 4TH INPUT FILE
[190]	1018	;
[218]	1019	; 4th input file produced by PALM; if there is more than one file for all timesteps of a job chain,
	1020	; declare path and file name without cycle number and ".nc" (first and last cycle numbers are given with the parameters 'start_f' and 'end_f');
	1021	; otherwise declare path and full file name
[190]	1022	;
	1023	; data type: string
	1024	;
[218]	1025	; example: file_4 = "/path_to_file/file_pr" if you use more than one cycle number
	1026	; file_4 = "/path_to_file/file_pr.4.nc" if you use one file (e.g. with cycle number 4)
	1027	;
[190]	1028	; default: "File in"
	1029	;***************************************************
[218]	1030	if(.not. isvar("file_4"))then
	1031
	1032
	1033	file_4 = "File in"
[190]	1034
	1035
[218]	1036	end if
[190]	1037	;***************************************************
[218]	1038	; REQUIRED --start_f_4-- START OF CYCLIC NUMBER OF THE 4TH INPUT FILE
[190]	1039	;
[218]	1040	; if there is more than one file for all timesteps of a job chain, declare the first cyclicnumber which contains timesteps you'd like to use
[190]	1041	;
[218]	1042	; data type: integer
[190]	1043	;
[218]	1044	; example: 3 (if first file: example_ts.3.nc)
	1045	;
	1046	; default: -1
[190]	1047	;***************************************************
[218]	1048	if (.not. isvar("start_f_4"))then
[190]	1049
[218]	1050
	1051	start_f_4 = -1
[190]	1052
	1053
[218]	1054	end if
[190]	1055	;***************************************************
[218]	1056	; REQUIRED --end_f_4-- END OF CYCLIC NUMBER OF THE 4TH INPUT FILE
[190]	1057	;
[218]	1058	; if there is more than one file for all timesteps of a job chain, declare the last cyclicnumber which contains timesteps you'd like to use
[190]	1059	;
[218]	1060	; data type: integer
[190]	1061	;
[218]	1062	; example: 48 (if last file: example_ts.48.nc)
	1063	;
	1064	; default: -1
[190]	1065	;***************************************************
[218]	1066	if (.not. isvar("end_f_4"))then
[190]	1067
[218]	1068
	1069	end_f_4 = -1
[190]	1070
	1071
[218]	1072	end if
[190]	1073	;***************************************************
[218]	1074	; OPTIONAL --name_legend_4-- 4th LEGEND ITEM
[190]	1075	;
[218]	1076	; if no_files > 3: name of 4th item in extra legend
[190]	1077	;
	1078	; data type: string
	1079	;
[218]	1080	; default: "File 4"
[190]	1081	;***************************************************
[218]	1082	if (.not. isvar("name_legend_4"))then
[190]	1083
[218]	1084
	1085	name_legend_4 = "File 4"
[190]	1086
	1087
[218]	1088	end if
[190]	1089	;***************************************************
[218]	1090	; REQUIRED if no_files > 4 --file_5-- 5TH INPUT FILE
[190]	1091	;
[218]	1092	; 5th input file produced by PALM; if there is more than one file for all timesteps of a job chain,
	1093	; declare path and file name without cycle number and ".nc" (first and last cycle numbers are given with the parameters 'start_f' and 'end_f');
	1094	; otherwise declare path and full file name
[190]	1095	;
	1096	; data type: string
	1097	;
[218]	1098	; example: file_5 = "/path_to_file/file_pr" if you use more than one cycle number
	1099	; file_5 = "/path_to_file/file_pr.4.nc" if you use one file (e.g. with cycle number 4)
	1100	;
[190]	1101	; default: "File in"
	1102	;***************************************************
[218]	1103	if(.not. isvar("file_5"))then
	1104
	1105
	1106	file_5 = "File in"
[190]	1107
	1108
[218]	1109	end if
[190]	1110	;***************************************************
[218]	1111	; REQUIRED --start_f_5-- START OF CYCLIC NUMBER OF THE 5TH INPUT FILE
[190]	1112	;
[218]	1113	; if there is more than one file for all timesteps of a job chain, declare the first cyclicnumber which contains timesteps you'd like to use
[190]	1114	;
[218]	1115	; data type: integer
[190]	1116	;
[218]	1117	; example: 3 (if first file: example_ts.3.nc)
	1118	;
	1119	; default: -1
[190]	1120	;***************************************************
[218]	1121	if (.not. isvar("start_f_5"))then
[190]	1122
[218]	1123
	1124	start_f_5 = -1
[190]	1125
	1126
[218]	1127	end if
[190]	1128	;***************************************************
[218]	1129	; REQUIRED --end_f_5-- END OF CYCLIC NUMBER OF THE 5TH INPUT FILE
[190]	1130	;
[218]	1131	; if there is more than one file for all timesteps of a job chain, declare the last cyclicnumber which contains timesteps you'd like to use
[190]	1132	;
[218]	1133	; data type: integer
[190]	1134	;
[218]	1135	; example: 48 (if last file: example_ts.48.nc)
	1136	;
	1137	; default: -1
[190]	1138	;***************************************************
[218]	1139	if (.not. isvar("end_f_5"))then
[190]	1140
[218]	1141
	1142	end_f_5 = -1
[190]	1143
	1144
[218]	1145	end if
[190]	1146	;***************************************************
[218]	1147	; OPTIONAL --name_legend_5-- 5th LEGEND ITEM
[190]	1148	;
[218]	1149	; if no_files > 4: name of 5th item in extra legend
[190]	1150	;
	1151	; data type: string
	1152	;
[218]	1153	; default: "File 5"
[190]	1154	;***************************************************
[218]	1155	if (.not. isvar("name_legend_5"))then
[190]	1156
[218]	1157
	1158	name_legend_5 = "File 5"
[190]	1159
	1160
[218]	1161	end if
[190]	1162	;***************************************************
[218]	1163	; REQUIRED if no_files > 5 --file_6-- 6TH INPUT FILE
[190]	1164	;
[218]	1165	; 6th input file produced by PALM; if there is more than one file for all timesteps of a job chain,
	1166	; declare path and file name without cycle number and ".nc" (first and last cycle numbers are given with the parameters 'start_f' and 'end_f');
	1167	; otherwise declare path and full file name
[190]	1168	;
	1169	; data type: string
	1170	;
[218]	1171	; example: file_6 = "/path_to_file/file_pr" if you use more than one cycle number
	1172	; file_6 = "/path_to_file/file_pr.4.nc" if you use one file (e.g. with cycle number 4)
	1173	;
[190]	1174	; default: "File in"
	1175	;***************************************************
[218]	1176	if(.not. isvar("file_6"))then
	1177
	1178
	1179	file_6 = "File in"
[190]	1180
	1181
[218]	1182	end if
[190]	1183	;***************************************************
[218]	1184	; REQUIRED --start_f_6-- START OF CYCLIC NUMBER OF THE 6TH INPUT FILE
[190]	1185	;
[218]	1186	; if there is more than one file for all timesteps of a job chain, declare the first cyclicnumber which contains timesteps you'd like to use
[190]	1187	;
[218]	1188	; data type: integer
[190]	1189	;
[218]	1190	; example: 3 (if first file: example_ts.3.nc)
	1191	;
	1192	; default: -1
[190]	1193	;***************************************************
[218]	1194	if (.not. isvar("start_f_6"))then
[190]	1195
[218]	1196
	1197	start_f_6 = -1
[190]	1198
	1199
[218]	1200	end if
[190]	1201	;***************************************************
[218]	1202	; REQUIRED --end_f_6-- END OF CYCLIC NUMBER OF THE 6TH INPUT FILE
[190]	1203	;
[218]	1204	; if there is more than one file for all timesteps of a job chain, declare the last cyclicnumber which contains timesteps you'd like to use
[190]	1205	;
[218]	1206	; data type: integer
[190]	1207	;
[218]	1208	; example: 48 (if last file: example_ts.48.nc)
	1209	;
	1210	; default: -1
[190]	1211	;***************************************************
[218]	1212	if (.not. isvar("end_f_6"))then
[190]	1213
[218]	1214
	1215	end_f_6 = -1
[190]	1216
	1217
[218]	1218	end if
[190]	1219	;***************************************************
[218]	1220	; OPTIONAL --name_legend_6-- 6TH LEGEND ITEM
[190]	1221	;
[218]	1222	; if no_files > 5: name of 6th item in extra legend
[190]	1223	;
	1224	; data type: string
	1225	;
[218]	1226	; default: "File 6"
[190]	1227	;***************************************************
[218]	1228	if (.not. isvar("name_legend_6"))then
[190]	1229
[218]	1230
	1231	name_legend_6 = "File 6"
[190]	1232
	1233
[218]	1234	end if
[190]	1235	;***************************************************
[218]	1236	; OPTIONAL --start_time_step-- FIRST TIME STEP
[190]	1237	;
[218]	1238	; first time step of plot; there is no need to specify a precise time value from the input file,
	1239	; 'start_time_step' is rounded to the next existent time step
[190]	1240	;
[218]	1241	; data type: double; dimension: [hour]
[190]	1242	;
[218]	1243	; example: start_time_step = 0.5
	1244	;
	1245	; default: -1.d (first available time step)
[190]	1246	;***************************************************
[218]	1247	if (.not. isvar("start_time_step"))then
[190]	1248
[218]	1249
	1250	start_time_step = -1.d
[190]	1251
	1252
	1253	end if
	1254	;***************************************************
[218]	1255	; OPTIONAL --end_time_step-- LAST TIME STEP
[190]	1256	;
[218]	1257	; last time step of plot; there is no need to specify a precise time value from the input file,
	1258	; 'end_time_step' is rounded to the next existent time step
[190]	1259	;
[218]	1260	; data type: double; dimension: [hour]
[190]	1261	;
[218]	1262	; example: end_time_step = 2.0
	1263	;
	1264	; default: -1.d (last available time step)
[190]	1265	;***************************************************
[218]	1266	if (.not. isvar("end_time_step"))then
[190]	1267
[218]	1268
	1269	end_time_step = -1.d
[190]	1270
	1271
[218]	1272	end if
[190]	1273	;***************************************************
[218]	1274	; OPTIONAL --start_x-- STARTVALUE IN X-DIRECTION
[190]	1275	;
[218]	1276	; if 3D data is used for profiles you can choose a startvalue in x-direction for horizontal averaging
[190]	1277	;
[218]	1278	; data type: integer; dimension [grippoint]
[190]	1279	;
[218]	1280	; example: start_x = 0
	1281	;
	1282	; default: 0 (minimum of range)
[190]	1283	;***************************************************
[218]	1284	if (.not. isvar("start_x"))then
[190]	1285
[218]	1286
	1287	start_x = 0
[190]	1288
	1289
[218]	1290	end if
[190]	1291	;***************************************************
[218]	1292	; OPTIONAL --end_x-- ENDVALUE IN X-DIRECTION
[190]	1293	;
[218]	1294	; if 3D data is used for profiles you can choose an endvalue in x-direction for horizontal averaging
[190]	1295	;
[218]	1296	; data type: integer; dimension [grippoint]
[190]	1297	;
[218]	1298	; example: end_x = 200
	1299	;
	1300	; default: -1 (maximum of range excluding ghostpoint)
[190]	1301	;***************************************************
[218]	1302	if (.not. isvar("end_x"))then
[190]	1303
[218]	1304
	1305	end_x = -1
[190]	1306
	1307
[218]	1308	end if
[190]	1309	;***************************************************
[218]	1310	; OPTIONAL --start_y-- STARTVALUE IN Y-DIRECTION
[190]	1311	;
[218]	1312	; if 3D data is used for profiles you can choose a startvalue in y-direction for horizontal averaging
[190]	1313	;
[218]	1314	; data type: integer; dimension [grippoint]
[190]	1315	;
[218]	1316	; example: start_y = 0
	1317	;
	1318	; default: 0 (minimum of range)
[190]	1319	;***************************************************
[218]	1320	if (.not. isvar("start_y"))then
[190]	1321
[218]	1322
	1323	start_y = 0
[190]	1324
	1325
[218]	1326	end if
[190]	1327	;***************************************************
[218]	1328	; OPTIONAL --end_y-- ENDVALUE IN Y-DIRECTION
[190]	1329	;
[218]	1330	; if 3D data is used for profiles you can choose an endvalue in y-direction for horizontal averaging
[190]	1331	;
[218]	1332	; data type: integer; dimension [grippoint]
[190]	1333	;
[218]	1334	; example: end_y = 200
	1335	;
	1336	; default: -1 (maximum of range excluding ghostpoint)
[190]	1337	;***************************************************
[218]	1338	if (.not. isvar("end_y"))then
[190]	1339
[218]	1340
	1341	end_y = -1
[190]	1342
	1343
[218]	1344	end if
[190]	1345	;***************************************************
	1346	; OPTIONAL --xs-- MINIMUM X-AXIS
	1347	;
	1348	; value for minimum of x-axis
	1349	;
	1350	; data type: float; dimension of variable
	1351	;
[218]	1352	; example: xs = 300. (e.g. if var=",pt")
	1353	;
[190]	1354	; default: -1. (minimum of range)
	1355	;***************************************************
	1356	if (.not. isvar("xs"))then
	1357
	1358
	1359	xs = -1.
	1360
	1361
	1362	end if
	1363	;***************************************************
	1364	; OPTIONAL --xe-- MAXIMUM X-AXIS
	1365	;
	1366	; value for maximum of x-axis
	1367	;
	1368	; data type: float; dimension of variable
	1369	;
[218]	1370	; example: xe = 302. (e.g. if var=",pt")
	1371	;
[190]	1372	; default: -1. (maximum of range)
	1373	;***************************************************
	1374	if (.not. isvar("xe"))then
	1375
	1376
	1377	xe = -1.
	1378
	1379
	1380	end if
	1381	;***************************************************
	1382	; OPTIONAL --min_z-- MINIMUM Z-AXIS
	1383	;
	1384	; value for minimum height of z-axis
	1385	;
	1386	; data type: double; dimension: [meter]
	1387	;
[218]	1388	; example: min_z = 0.0
	1389	;
[190]	1390	; default: -1.d (related to the minimum of z-axis in input file)
	1391	;***************************************************
	1392	if (.not. isvar("min_z"))then
	1393
	1394
	1395	min_z = -1.d
	1396
	1397
	1398	end if
	1399	;***************************************************
	1400	; OPTIONAL --max_z-- MAXIMUM Z-AXIS
	1401	;
	1402	; value for maximum height of z-axis
	1403	;
	1404	; data type: double; dimension: [meter]
	1405	;
[218]	1406	; example: max_z = 1000.0
	1407	;
[190]	1408	; default: -1.d (related to the maximum of z-axis in input file)
	1409	;***************************************************
	1410	if (.not. isvar("max_z"))then
	1411
	1412
	1413	max_z = -1.d
	1414
	1415
	1416	end if
	1417	;***************************************************
[218]	1418	; OPTIONAL --log_z-- LOGARITHMIC SCALE OF Z-AXIS
[190]	1419	;
[218]	1420	; logarithmic scale for z-axis is switched on [=1] or off [=0]
[190]	1421	;
	1422	; data type: integer
	1423	;
[218]	1424	; example: log_z = 0
	1425	;
[190]	1426	; default: 0
	1427	;***************************************************
[218]	1428	if (.not. isvar("log_z"))then
[190]	1429
	1430
[218]	1431	log_z = 0
[190]	1432
	1433
	1434	end if
	1435	;***************************************************
[218]	1436	; OPTIONAL --norm_z-- NORMALISING Z-AXIS
[190]	1437	;
[218]	1438	; value for normalising the z-axis
[190]	1439	;
	1440	; data type: float
	1441	;
[218]	1442	; example: norm_z = 1.
	1443	;
	1444	; default: 1. (no normalising)
[190]	1445	;***************************************************
[218]	1446	if (.not. isvar("norm_z"))then
[190]	1447
	1448
[218]	1449	norm_z = 1.
[190]	1450
	1451
	1452	end if
	1453	;***************************************************
	1454	; OPTIONAL --over-- OVERLAYING
	1455	;
[218]	1456	; predefined overlaying of standard variables is switched on [=1] or off [=0];
[190]	1457	; this feature cannot be used with statistic regions
	1458	;
	1459	; data type: integer
	1460	;
[218]	1461	; example: over = 0
	1462	;
[190]	1463	; default: 0
	1464	;***************************************************
	1465	if (.not. isvar("over"))then
	1466
	1467
	1468	over = 0
	1469
	1470
	1471	end if
	1472	;***************************************************
	1473	; OPTIONAL --combine-- COMBINING
	1474	;
	1475	; combining of two or three individual variables is possible and switched on [=1] or off[=0]
	1476	;
	1477	; data type: integer
	1478	;
[218]	1479	; example: combine = 0
	1480	;
[190]	1481	; default: 0
	1482	;***************************************************
	1483	if (.not. isvar("combine"))then
	1484
	1485
	1486	combine = 0
	1487
	1488
	1489	end if
	1490	;***************************************************
	1491	; REQUIRED IF combine=1 --number_comb-- NUMBER FOR COMBINING
	1492	;
	1493	; number of variables for combining; 2 or 3 is valid
	1494	;
	1495	; data type: integer
	1496	;
[218]	1497	; example: number_comb = 2
	1498	;
[190]	1499	; default: -1
	1500	;***************************************************
	1501	if (.not. isvar("number_comb"))then
	1502
	1503
	1504	number_comb = -1
	1505
	1506
	1507	end if
	1508	;***************************************************
	1509	; REQUIRED IF combine=1 --c_var-- VARIABLES FOR COMBINING
	1510	;
[218]	1511	; names of variables; inidcate them with one comma before and after each variable;
[190]	1512	;
	1513	; data type: string
	1514	;
[218]	1515	; example: c_var = ",u,v,"
	1516	;
[190]	1517	; default: "c_variables"
	1518	;***************************************************
	1519	if (.not. isvar("c_var"))then
	1520
	1521
	1522	c_var = "c_variables"
	1523
	1524
	1525	end if
	1526	;***************************************************
	1527	; OPTIONAL --black-- BLACK OR COLOR LINES
	1528	;
	1529	; colored [=0] or black and white [=1] plots
	1530	;
	1531	; data type: integer
	1532	;
[218]	1533	; example: black = 0
	1534	;
[190]	1535	; default: 0
	1536	;***************************************************
	1537	if (.not. isvar("black"))then
	1538
	1539
	1540	black = 0
	1541
	1542
	1543	end if
	1544	;***************************************************
	1545	; OPTIONAL --dash-- DASHED LINES
	1546	;
	1547	; use of different line patterns [=1] or continous lines [=0] for different time steps
	1548	;
	1549	; data type: integer
	1550	;
[218]	1551	; example: dash = 0
	1552	;
[190]	1553	; default: 0
	1554	;***************************************************
	1555	if (.not. isvar("dash"))then
	1556
	1557
	1558	dash = 0
	1559
	1560
[218]	1561	end if
	1562	;***************************************************
	1563	; OPTIONAL --font_size-- FONT SIZE OF STRINGS
	1564	;
	1565	; font size can be changed to fit to the current plot
	1566	;
	1567	; data type: float
	1568	;
	1569	; example: font_size = 0.02
	1570	;
	1571	; default: 0.02
	1572	;***************************************************
	1573	if(.not. isvar("font_size"))then
	1574
	1575
	1576	font_size = 0.02
	1577
	1578
	1579	end if
	1580	;***************************************************
	1581	; OPTIONAL --font_size_legend-- FONT SIZE OF LEGEND STRINGS
	1582	;
	1583	; font size of the legend can be changed to fit to the current plot
	1584	;
	1585	; data type: float
	1586	;
	1587	; example: font_size_legend = 0.2
	1588	;
	1589	; default: 0.2
	1590	;***************************************************
	1591	if(.not. isvar("font_size_legend"))then
	1592
	1593
	1594	font_size_legend = 0.2
	1595
	1596
[190]	1597	end if
	1598	;***************************************************
	1599
	1600	end if
[194]	1601
[190]	1602	;******************************************************
	1603	; parameters used by SPECTRA
	1604	;******************************************************
	1605
[194]	1606	if (script .EQ. "spectra") then
	1607
[190]	1608	;***************************************************
	1609	; REQUIRED --file_1-- INPUT FILE
	1610	;
[218]	1611	; input file produced by PALM; if there is more than one file for all timesteps of a job chain,
	1612	; declare path and file name without cycle number and ".nc" (first and last cycle numbers are given with the parameters 'start_f' and 'end_f');
	1613	; otherwise declare path and full file name
[190]	1614	;
	1615	; data type: string
	1616	;
[218]	1617	; example: file_1 = "/path_to_file/file_sp" if you use more than one cycle number
	1618	; file_1 = "/path_to_file/file_sp.4.nc" if you use one file (e.g. with cycle number 4)
	1619	;
[190]	1620	; default: "File in"
	1621	;***************************************************
[218]	1622	if(.not. isvar("file_1"))then
	1623
	1624
	1625	file_1 = "File in"
	1626
	1627
	1628	end if
	1629	;***************************************************
	1630	; REQUIRED if more than one file of a job chain --start_f-- START OF CYCLIC NUMBER
	1631	;
	1632	; if there is more than one file for all timesteps of a job chain, declare the first cyclicnumber which contains timesteps you'd like to use
	1633	;
	1634	; data type: integer
	1635	;
[236]	1636	; example: start_f = 3 (if first file: example_sp.3.nc) and 0 (if first file: example_sp.nc)
[218]	1637	;
	1638	; default: -1
	1639	;***************************************************
	1640	if (.not. isvar("start_f"))then
[190]	1641
	1642
[218]	1643	start_f = -1
[190]	1644
	1645
[218]	1646	end if
[190]	1647	;***************************************************
[218]	1648	; REQUIRED if more than one file of a job chain --end_f-- END OF CYCLIC NUMBER
	1649	;
	1650	; if there is more than one file for all timesteps of a job chain, declare the last cyclicnumber which contains timesteps you'd like to use
	1651	;
	1652	; data type: integer
	1653	;
[236]	1654	; example: end_f = 48 (if last file: example_sp.48.nc) and 0 (if last file: example_sp.nc)
[218]	1655	;
	1656	; default: -1
	1657	;***************************************************
	1658	if (.not. isvar("end_f"))then
	1659
	1660
	1661	end_f = -1
	1662
	1663
	1664	end if
	1665	;***************************************************
[190]	1666	; OPTIONAL --format_out-- OUTPUT FORMAT
	1667	;
[218]	1668	; format of the output file; supported file formats: x11, pdf, ps, eps, epsi or ncgm
[190]	1669	;
	1670	; data type: string
	1671	;
[218]	1672	; example: format_out = "pdf"
	1673	;
[190]	1674	; default: "x11"
	1675	;***************************************************
	1676	if (.not. isvar("format_out"))then
	1677
	1678
	1679	format_out = "x11"
	1680
	1681
	1682	end if
	1683	;***************************************************
	1684	; OPTIONAL --file_out-- OUTPUT FILE
	1685	;
[218]	1686	; path and name of the output file
[190]	1687	;
	1688	; data type: string
	1689	;
[218]	1690	; example: file_out = "/home/path_to_output/test_sp"
	1691	;
[194]	1692	; default: "~/test_sp"
[190]	1693	;***************************************************
	1694	if (.not. isvar("file_out"))then
	1695
	1696
	1697	file_out = "~/test_sp"
	1698
	1699
	1700	end if
	1701	;***************************************************
[218]	1702	; OPTIONAL --no_columns-- NUMBER OF COLUMNS
[190]	1703	;
	1704	; number of plots in one row
	1705	;
	1706	; data type: integer
[218]	1707	;
	1708	; example: no_columns = 1
[190]	1709	;
	1710	; default: 1
	1711	;***************************************************
	1712	if (.not. isvar("no_columns"))then
	1713
	1714
	1715	no_columns = 1
	1716
	1717
	1718	end if
	1719	;***************************************************
[218]	1720	; OPTIONAL --no_rows-- NUMBER OF ROWS
[190]	1721	;
	1722	; number of plots in one column
	1723	;
	1724	; data type: integer
[218]	1725	;
	1726	; example: no_rows = 2
[190]	1727	;
	1728	; default: 2
	1729	;***************************************************
[218]	1730	if (.not. isvar("no_rows"))then
[190]	1731
	1732
[218]	1733	no_rows = 2
[190]	1734
	1735
	1736	end if
	1737	;***************************************************
	1738	; OPTIONAL --var-- OUTPUT VARIABLES
	1739	;
[218]	1740	; names of output variables; inidcate them with one comma before and after each variable
[190]	1741	;
	1742	; data type: string
[218]	1743	;
	1744	; example: var = ",u,v,w"
[190]	1745	;
[218]	1746	; default: "all" (all available variables are plotted)
[190]	1747	;***************************************************
	1748	if (.not. isvar("var"))then
	1749
	1750
	1751	var = "all"
	1752
	1753
	1754	end if
	1755	;***************************************************
	1756	; OPTIONAL --height_level-- HEIGHT LEVELS
	1757	;
[218]	1758	; defines if all levels or selected levels are output; a 1D array with up to 100 elements
	1759	; from 0 to 99 must be indicated
[190]	1760	;
	1761	; data type: integer array
	1762	;
[218]	1763	; example: height_level=(/0,3,7/)
	1764	;
	1765	; default: (/-1/) (all levels are output)
[190]	1766	;***************************************************
	1767	if (.not. isvar("height_level"))then
	1768
	1769
	1770	height_level = (/-1/)
	1771
	1772
	1773	end if
	1774	;***************************************************
	1775	; OPTIONAL --sort-- TYPE OF SORTING
	1776	;
[218]	1777	; defines if all heights [="height"] or all timesteps [="time"] are merged in one plot
[190]	1778	;
	1779	; data type: string
	1780	;
[218]	1781	; example: sort = "height"
	1782	;
[190]	1783	; default: "height"
	1784	;***************************************************
	1785	if (.not. isvar("sort"))then
	1786
	1787
	1788	sort = "height"
	1789
	1790
	1791	end if
	1792	;***************************************************
	1793	; OPTIONAL --start_time_step-- FIRST TIME STEP
	1794	;
[218]	1795	; first time step of plot; there is no need to specify a precise time value from the input file,
	1796	; 'start_time_step' is rounded to the next existent time step
[190]	1797	;
	1798	; data type: double; dimension: [hour]
	1799	;
[218]	1800	; example: start_time_step = 0.5
	1801	;
[190]	1802	; default: -1.d (first available time step)
	1803	;***************************************************
	1804	if (.not. isvar("start_time_step"))then
	1805
	1806
	1807	start_time_step = -1.d
	1808
	1809
	1810	end if
	1811	;***************************************************
	1812	; OPTIONAL --end_time_step-- LAST TIME STEP
	1813	;
[218]	1814	; last time step of plot; there is no need to specify a precise time value from the input file,
	1815	; 'end_time_step' is rounded to the next existent time step
[190]	1816	;
	1817	; data type: double; dimension: [hour]
	1818	;
[218]	1819	; example: end_time_step = 2.0
	1820	;
[190]	1821	; default: -1.d (last available time step)
	1822	;***************************************************
	1823	if (.not. isvar("end_time_step"))then
	1824
	1825
	1826	end_time_step = -1.d
	1827
	1828
	1829	end if
	1830	;***************************************************
	1831	; OPTIONAL --black-- BLACK OR COLOR LINES
	1832	;
	1833	; colored [=0] or black and white [=1] plots
	1834	;
	1835	; data type: integer
	1836	;
[218]	1837	; example: black = 0
	1838	;
[190]	1839	; default: 0
	1840	;***************************************************
	1841	if (.not. isvar("black"))then
	1842
	1843
	1844	black = 0
	1845
	1846
	1847	end if
	1848	;***************************************************
	1849	; OPTIONAL --dash-- DASHED LINES
	1850	;
	1851	; use of different line patterns [=1] or continous lines [=0]
	1852	;
	1853	; data type: integer
	1854	;
[218]	1855	; example: dash = 0
	1856	;
[190]	1857	; default: 0
	1858	;***************************************************
	1859	if (.not. isvar("dash"))then
	1860
	1861
	1862	dash = 0
	1863
	1864
	1865	end if
	1866	;***************************************************
[218]	1867	; OPTIONAL --log_x-- LOGARITHMIC SCALE X-AXIS
[190]	1868	;
[218]	1869	; logarithmic scale for x-axis is switched on [=1] or off [=0]
[190]	1870	;
	1871	; data type: integer
	1872	;
[218]	1873	; example: log_x = 1
	1874	;
[190]	1875	; default: 1
	1876	;***************************************************
[218]	1877	if (.not. isvar("log_x"))then
[190]	1878
	1879
[218]	1880	log_x = 1
[190]	1881
	1882
	1883	end if
	1884	;***************************************************
[218]	1885	; OPTIONAL --log_y-- LOGARITHMIC SCALE Y-AXIS
[190]	1886	;
[218]	1887	; logarithmic scale for y-axis is switched on [=1] or off [=0]
[190]	1888	;
	1889	; data type: integer
	1890	;
[218]	1891	; example: log_y = 1
	1892	;
[190]	1893	; default: 1
	1894	;***************************************************
[218]	1895	if (.not. isvar("log_y"))then
[190]	1896
	1897
[218]	1898	log_y = 1
[190]	1899
	1900
	1901	end if
	1902	;***************************************************
[218]	1903	; OPTIONAL --norm_x-- NORMALISING X-AXIS
[190]	1904	;
	1905	; value for normalising the x-axis
	1906	;
	1907	; data type: float
	1908	;
[218]	1909	; example: norm_x = 1
	1910	;
[190]	1911	; default: 1. (no normalising)
	1912	;***************************************************
[218]	1913	if (.not. isvar("norm_x"))then
[190]	1914
	1915
[218]	1916	norm_x = 1.
[190]	1917
	1918
[218]	1919	end if
	1920	;***************************************************
	1921	; OPTIONAL --norm_height-- NORMALISING X-AXIS WITH HEIGHT
	1922	;
	1923	; normalising the x-axis with the height of each spectra is switched on [=1] or off [=0]
	1924	;
	1925	; data type: integer
	1926	;
	1927	; example: norm_height = 0
	1928	;
	1929	; default: 0 (no normalising)
	1930	;***************************************************
	1931	if (.not. isvar("norm_height"))then
	1932
	1933
	1934	norm_height = 0
	1935
	1936
[190]	1937	end if
	1938	;***************************************************
[218]	1939	; OPTIONAL --norm_y-- NORMALISE Y-AXIS
[190]	1940	;
	1941	; value for normalising the y-axis
	1942	;
	1943	; data type: float
	1944	;
[218]	1945	; example: norm_y = 1.
	1946	;
[190]	1947	; default: 1. (no normalising)
	1948	;***************************************************
[218]	1949	if (.not. isvar("norm_y"))then
[190]	1950
	1951
[218]	1952	norm_y = 1.
[190]	1953
	1954
[218]	1955	end if
[190]	1956	;***************************************************
[218]	1957	; OPTIONAL --unit_x--unit_y-- UNITS OF X-, Y-AXES
	1958	;
	1959	; unit of the x-axis can be set if norm_x is unequal 1, otherwise the unit is [1/m]; by default no unit is set for the y-axis
	1960	;
	1961	; data type: string,
	1962	;
	1963	; example: unit_x = "100/m"
	1964	;
	1965	; default: " "
	1966	;***************************************************
	1967	if(.not. isvar("unit_x"))then
	1968
	1969	unit_x = " "
	1970
	1971	end if
	1972	if(.not. isvar("unit_y"))then
	1973
	1974	unit_y = " "
	1975
	1976	end if
	1977	;***************************************************
	1978	; OPTIONAL --font_size-- FONT SIZE OF STRINGS
	1979	;
	1980	; font size can be changed to fit to the current plot
	1981	;
	1982	; data type: float
	1983	;
	1984	; example: font_size = 0.02
	1985	;
	1986	; default: 0.02
	1987	;***************************************************
	1988	if(.not. isvar("font_size"))then
	1989
	1990
	1991	font_size = 0.02
	1992
	1993
	1994	end if
	1995	;***************************************************
	1996	; OPTIONAL --font_size_legend-- FONT SIZE OF LEGEND STRINGS
	1997	;
	1998	; font size of the legend can be changed to fit to the current plot
	1999	;
	2000	; data type: float
	2001	;
	2002	; example: font_size_legend = 0.2
	2003	;
	2004	; default: 0.2
	2005	;***************************************************
	2006	if(.not. isvar("font_size_legend"))then
	2007
	2008
	2009	font_size_legend = 0.2
	2010
	2011
	2012	end if
	2013	;***************************************************
[190]	2014
	2015	end if
[194]	2016
[190]	2017	;******************************************************
	2018	; parameters used by TIMESERIES
	2019	;******************************************************
	2020
[194]	2021	if (script .EQ. "timeseries") then
	2022
[190]	2023	;***************************************************
	2024	; REQUIRED --file_1-- INPUT FILE
	2025	;
[218]	2026	; input file produced by PALM; if there is more than one file for all timesteps of a job chain,
	2027	; declare path and file name without cycle number and ".nc" (first and last cycle numbers are given with the parameters 'start_f' and 'end_f');
	2028	; otherwise declare path and full file name
[190]	2029	;
	2030	; data type: string
	2031	;
[218]	2032	; example: file_1 = "/path_to_file/file_ts" if you use more than one cycle number
	2033	; file_1 = "/path_to_file/file_ts.4.nc" if you use one file (e.g. with cycle number 4)
	2034	;
[190]	2035	; default: "File in"
	2036	;***************************************************
[218]	2037	if(.not. isvar("file_1"))then
	2038
	2039
	2040	file_1 = "File in"
	2041
	2042
	2043	end if
	2044	;***************************************************
	2045	; REQUIRED if more than one file of a job chain --start_f-- START OF CYCLIC NUMBER
	2046	;
	2047	; if there is more than one file for all timesteps of a job chain, declare the first cyclicnumber which contains timesteps you'd like to use
	2048	;
	2049	; data type: integer
	2050	;
[236]	2051	; example: start_f = 3 (if first file: example_ts.3.nc) and 0 (if first file: example_ts.nc)
[218]	2052	;
	2053	; default: -1
	2054	;***************************************************
	2055	if (.not. isvar("start_f"))then
[190]	2056
	2057
[218]	2058	start_f = -1
[190]	2059
	2060
[218]	2061	end if
[190]	2062	;***************************************************
[218]	2063	; REQUIRED if more than one file of a job chain --end_f-- END OF CYCLIC NUMBER
	2064	;
	2065	; if there is more than one file for all timesteps of a job chain, declare the last cyclicnumber which contains timesteps you'd like to use
	2066	;
	2067	; data type: integer
	2068	;
[236]	2069	; example: end_f = 48 (if last file: example_ts.48.nc) and 0 (if last file: example_ts.nc)
[218]	2070	;
	2071	; default: -1
	2072	;***************************************************
	2073	if (.not. isvar("end_f"))then
	2074
	2075
	2076	end_f = -1
	2077
	2078
	2079	end if
	2080	;***************************************************
[190]	2081	; OPTIONAL --format_out-- OUTPUT FORMAT
	2082	;
[218]	2083	; format of the output file; supported file formats: x11, pdf, ps, eps, epsi or ncgm
[190]	2084	;
	2085	; data type: string
	2086	;
[218]	2087	; example: format_out = "pdf"
	2088	;
[190]	2089	; default: "x11"
	2090	;***************************************************
	2091	if (.not. isvar("format_out"))then
	2092
	2093
	2094	format_out = "x11"
	2095
	2096
	2097	end if
	2098	;***************************************************
	2099	; OPTIONAL --file_out-- OUTPUT FILE
	2100	;
[218]	2101	; path and name of the output file
[190]	2102	;
	2103	; data type: string
	2104	;
[218]	2105	; example: file_out = "/home/path_to_output/test_ts"
	2106	;
[194]	2107	; default: "~/test_ts"
[190]	2108	;***************************************************
	2109	if (.not. isvar("file_out"))then
	2110
	2111
	2112	file_out = "~/test_ts"
	2113
	2114
	2115	end if
	2116	;***************************************************
[218]	2117	; OPTIONAL --no_columns-- NUMBER OF COLUMNS
[190]	2118	;
	2119	; number of plots in one row
	2120	;
	2121	; data type: integer
[218]	2122	;
	2123	; example: no_columns = 1
[190]	2124	;
	2125	; default: 1
	2126	;***************************************************
	2127	if (.not. isvar("no_columns"))then
	2128
	2129
	2130	no_columns = 1
	2131
	2132
	2133	end if
	2134	;***************************************************
[218]	2135	; OPTIONAL --no_rows-- NUMBER OF ROWS
[190]	2136	;
	2137	; number of plots in one column
	2138	;
	2139	; data type: integer
[218]	2140	;
	2141	; example: no_rows = 2
[190]	2142	;
	2143	; default: 2
	2144	;***************************************************
[218]	2145	if (.not. isvar("no_rows"))then
[190]	2146
	2147
[218]	2148	no_rows = 2
[190]	2149
	2150
	2151	end if
	2152	;***************************************************
	2153	; OPTIONAL --var-- OUTPUT VARIABLES
	2154	;
[218]	2155	; names of output variables; inidcate them with one comma before and after each variable
[190]	2156	;
	2157	; data type: string
[218]	2158	;
	2159	; example: var = ",u,v,w"
[190]	2160	;
[218]	2161	; default: "all" (all available variables are plotted)
[190]	2162	;***************************************************
	2163	if (.not. isvar("var"))then
	2164
	2165
	2166	var = "all"
	2167
	2168
	2169	end if
	2170	;***************************************************
	2171	; OPTIONAL --start_time_step-- FIRST TIME STEP
	2172	;
[218]	2173	; first time step of plot; there is no need to specify a precise time value from the input file,
	2174	; 'start_time_step' is rounded to the next existent time step
[190]	2175	;
	2176	; data type: double; dimension: [hour]
	2177	;
[218]	2178	; example: start_time_step = 0.5
	2179	;
[190]	2180	; default: -1.d (first available time step)
	2181	;***************************************************
	2182	if (.not. isvar("start_time_step"))then
	2183
	2184
	2185	start_time_step = -1.d
	2186
	2187
	2188	end if
	2189	;***************************************************
	2190	; OPTIONAL --end_time_step-- LAST TIME STEP
	2191	;
[218]	2192	; last time step of plot; there is no need to specify a precise time value from the input file,
	2193	; 'end_time_step' is rounded to the next existent time step
[190]	2194	;
	2195	; data type: double; dimension: [hour]
	2196	;
[218]	2197	; example: end_time_step = 2.0
	2198	;
[190]	2199	; default: -1.d (last available time step)
	2200	;***************************************************
	2201	if (.not. isvar("end_time_step"))then
	2202
	2203
	2204	end_time_step = -1.d
	2205
	2206
	2207	end if
	2208	;***************************************************
	2209	; OPTIONAL --over-- OVERLAYING
	2210	;
[218]	2211	; predefined overlaying of standard variables are switched on [=1] or off [=0];
[190]	2212	; this feature cannot be used with statistic regions
	2213	;
	2214	; data type: integer
	2215	;
[218]	2216	; example: over = 0
	2217	;
[190]	2218	; default: 0
	2219	;***************************************************
	2220	if (.not. isvar("over"))then
	2221
	2222
	2223	over = 0
	2224
	2225
[218]	2226	end if
	2227	;***************************************************
	2228	; OPTIONAL --font_size-- FONT SIZE OF STRINGS
	2229	;
	2230	; font size can be changed to fit to the current plot
	2231	;
	2232	; data type: float
	2233	;
	2234	; example: font_size = 0.07
	2235	;
	2236	; default: 0.07
	2237	;***************************************************
	2238	if(.not. isvar("font_size"))then
	2239
	2240
	2241	font_size = 0.07
	2242
	2243
[190]	2244	end if
	2245	;***************************************************
[218]	2246	; OPTIONAL --norm_t-- NORMALISING X-AXIS OF TIMESERIES PLOTS (T-AXIS)
	2247	;
	2248	; normalising the x-axis with the given value; the unit can explicitly set; by default no normalising and unit is set to [s]
	2249	;
	2250	; data type: float
	2251	;
	2252	; example: norm_t = 3600
	2253	;
	2254	; default: 1.
	2255	;***************************************************
	2256	if(.not. isvar("normt"))then
	2257
	2258
	2259	norm_t = 1.
	2260
	2261
	2262	end if
	2263	;***************************************************
	2264	; OPTIONAL --unit_t-- UNIT OF X-AXIS OF TIMESERIES PLOTS (T-AXIS)
	2265	;
	2266	; unit of the x-axis can be set; by default unit is set to [s]
	2267	;
	2268	; data type: string
	2269	;
	2270	; example: unit_t = "h"
	2271	;
	2272	; default: " "
	2273	;***************************************************
	2274	if(.not. isvar("unitt"))then
	2275
	2276
	2277	unit_t = " "
	2278
	2279
	2280	end if
	2281	;***************************************************
[190]	2282
	2283	end if
	2284
	2285	;*********************************************************
	2286
	2287	end

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format