Home

Context Navigation

.ncl.config.default @ 833

Last change on this file since 833 was 782, checked in by heinze, 13 years ago
Bugfix concerning setting of font size in legends.
File size: 69.6 KB

Line
1	;*********************************************************
2	; Copying .hluresfile in the home directory
3	;*********************************************************
4
5	command = "ksh 'if [ ! -f $HOME/.hluresfile ]; then; "+\
6	"cp $PALM_BIN/NCL/.hluresfile $HOME; fi'"
7	system(command)
8
9	;*********************************************************
10
11
12	begin
13
14	;*********************************************************
15
16	script=which_script
17
18	;******************************************************
19	; BE AWARE: NCl uses double quotes (") to denote strings
20	; to retrieve the double quote character - use dq:
21
22	dq=str_get_dq()
23
24	;******************************************************
25
26	;*********************************************************
27
28	;******************************************************
29	; parameters used by CROSS_SECTIONS
30	;******************************************************
31
32	if (script .EQ. "cross_section")then
33
34	;***************************************************
35	; REQUIRED --file_1-- INPUT FILE
36	;
37	; input file produced by PALM; if there is more than one file for
38	; all timesteps
39	; of a job chain,
40	; declare path and file name without cycle number and ".nc" (first and
41	; last cycle numbers are given with the parameters 'start_f' and
42	; 'end_f');
43	; otherwise declare path and full file name
44	;
45	; data type: string
46	;
47	; example: file_1 = "/path_to_file/file_xy_av" if you use more than
48	; one cycle number
49	; file_1 = "/path_to_file/file_xy_av.4.nc" if you use one file
50	; (e.g. with cycle number 4)
51	;
52	; default: "File in"
53	;***************************************************
54	if(.not. isvar("file_1"))then
55
56
57	file_1 = "File in"
58
59
60	end if
61	;***************************************************
62	; OPTIONAL/REQUIRED if more than one file of a job chain
63	; --start_f-- START OF CYCLIC NUMBER
64	;
65	; if there is more than one file for all timesteps of a job chain,
66	; declare the first cyclicnumber which contains timesteps
67	; you'd like to use
68	;
69	; data type: integer
70	;
71	; example: start_f = 3 (if first file: example_xy_av.3.nc) and
72	; start_f = 0 (if first file: example_xy_av.nc)
73	;
74	; default: -1
75	;***************************************************
76	if (.not. isvar("start_f"))then
77
78
79	start_f = -1
80
81
82	end if
83	;***************************************************
84	; OPTIONAL/REQUIRED if more than one file of a job chain
85	; --end_f-- END OF CYCLIC NUMBER
86	;
87	; if there is more than one file for all timesteps of a job chain,
88	; declare the last cyclicnumber which contains timesteps you'd like
89	; to use
90	;
91	; data type: integer
92	;
93	; example: end_f = 48 (if last file: example_xy_av.48.nc) and
94	; end_f = 0 (if last file: example_xy_av.nc)
95	;
96	; default: -1
97	;***************************************************
98	if (.not. isvar("end_f"))then
99
100
101	end_f = -1
102
103
104	end if
105	;***************************************************
106	; OPTIONAL --format_out-- OUTPUT FORMAT
107	;
108	; format of the output file;
109	; supported file formats: x11, pdf, ps, eps, epsi ncgm or png
110	;
111	; data type: string
112	;
113	; example: format_out = "pdf"
114	;
115	; default: "x11"
116	;***************************************************
117	if(.not. isvar("format_out"))then
118
119
120	format_out = "x11"
121
122
123	end if
124	;***************************************************
125	; OPTIONAL --file_out-- OUTPUT FILE
126	;
127	; path and name of the output file
128	;
129	; data type: string
130	;
131	; example: file_out = "/home/path_to_output/test_cs"
132	;
133	; default: "~/test_cs"
134	;***************************************************
135	if(.not. isvar("file_out"))then
136
137
138	file_out = "~/test_cs"
139
140
141	end if
142	;***************************************************
143	; OPTIONAL --var-- OUTPUT VARIABLES
144	;
145	; names of output variables;
146	; inidcate them with one comma before and after each variable;
147	; if the name contains double quotes (") use dq and the '+' operation to
148	; concatenate the strings
149	;
150	; data type: string
151	;
152	; example: var = ",u,v,w,"
153	;
154	; default: "all" (all available variables are plotted)
155	;***************************************************
156	if(.not. isvar("var"))then
157
158
159	var = "all"
160
161
162	end if
163	;***************************************************
164	; OPTIONAL --start_time_step-- FIRST TIME STEP
165	;
166	; first time step of plot; there is no need to specify a precise time
167	; value from the input file,
168	; 'start_time_step' is rounded to the next existent time step
169	;
170	; data type: double; dimension: [hour]
171	;
172	; example: start_time_step = 0.5d
173	;
174	; default: -1.d (first available time step)
175	;***************************************************
176	if(.not. isvar("start_time_step"))then
177
178
179	start_time_step = -1.d
180
181
182	end if
183	;***************************************************
184	; OPTIONAL --end_time_step-- LAST TIME STEP
185	;
186	; last time step of plot; there is no need to specify a precise time
187	; value from the input file,
188	; 'end_time_step' is rounded to the next existent time step
189	;
190	; data type: double; dimension: [hour]
191	;
192	; example: end_time_step = 2.0d
193	;
194	; default: -1.d (last available time step)
195	;***************************************************
196	if(.not. isvar("end_time_step"))then
197
198
199	end_time_step = -1.d
200
201
202	end if
203	;***************************************************
204	; OPTIONAL --xs-- MINIMUM X-AXIS
205	;
206	; value for minimum of x-axis, selectable if there are
207	; NO preset layers
208	; for x (as for XY or XZ 2D-DATA);
209	; there is no need to specify a precise meter value from the input file,
210	; it is rounded to the next existent value
211	;
212	; data type: double; dimension: [meter]
213	;
214	; example: xs = 150.0d
215	;
216	; default: -1.d (minimum of range)
217	;***************************************************
218	if(.not. isvar("xs"))then
219
220
221	xs = -1.d
222
223
224	end if
225	;***************************************************
226	; OPTIONAL --xe-- MAXIMUM X-AXIS
227	;
228	; value for maximum of x-axis, selectable if there are
229	; NO preset layers
230	; for x (as for XY or XZ 2D-DATA);
231	; there is no need to specify a precise meter value from the input file,
232	; it is rounded to the next existent value
233	;
234	; data type: double; dimension: [meter]
235	;
236	; example: xe = 300.0d
237	;
238	; default: -1.d (maximum of range)
239	;***************************************************
240	if(.not. isvar("xe"))then
241
242
243	xe = -1.d
244
245
246	end if
247	;***************************************************
248	; OPTIONAL --ys-- MINIMUM Y-AXIS
249	;
250	; value for minimum of y-axis, selectable if there are
251	; NO preset layers
252	; for y (as for XY or YZ 2D-DATA);
253	; there is no need to specify a precise meter value from the input file,
254	; it is rounded to the next existent value
255	;
256	; data type: double; dimension: [meter]
257	;
258	; example: ys = 150.0d
259	;
260	; default: -1.d (minimum of range)
261	;***************************************************
262	if(.not. isvar("ys"))then
263
264
265	ys = -1.d
266
267
268	end if
269	;***************************************************
270	; OPTIONAL --ye-- MAXIMUM Y-AXIS
271	;
272	; value for maximum of y-axis, selectable if there are NO preset layers
273	; for y (as for XY or YZ 2D-DATA);
274	; there is no need to specify a precise meter value from the input file,
275	; it is rounded to the next existent value
276	;
277	; data type: double; dimension: [meter]
278	;
279	; example: ye = 300.0d
280	;
281	; default: -1.d (maximum of range)
282	;***************************************************
283	if(.not. isvar("ye"))then
284
285
286	ye = -1.d
287
288
289	end if
290	;***************************************************
291	; OPTIONAL --zs-- MINIMUM Z-AXIS
292	;
293	; index for minimum of z-axis, selectable if there are
294	; NO preset layers
295	; for z (as for XZ or YZ 2D-DATA);
296	; you cannot specify a meter value from the input file due to
297	; grid stretching
298	;
299	; data type: integer
300	;
301	; example: zs = 0
302	;
303	; default: -1 (minimum of range)
304	;***************************************************
305	if(.not. isvar("zs"))then
306
307
308	zs = -1
309
310
311	end if
312	;***************************************************
313	; OPTIONAL --ze-- MAXIMUM Z-AXIS
314	;
315	; index for maximum of z-axis, selectable if there are
316	; NO preset layers
317	; for z (as for XZ or YZ 2D-DATA);
318	; you cannot specify a meter value from the input file due to
319	; grid stretching
320	;
321	; data type: integer
322	;
323	; example: ze = 15
324	;
325	; default: -1 (maximum of range)
326	;***************************************************
327	if(.not. isvar("ze"))then
328
329
330	ze = -1
331
332
333	end if
334	;***************************************************
335	; OPTIONAL --no_columns-- NUMBER OF COLUMNS
336	;
337	; number of plots in one row
338	;
339	; data type: integer
340	;
341	; example: no_columns = 1
342	;
343	; default: 1
344	;***************************************************
345	if(.not. isvar("no_columns"))then
346
347
348	no_columns = 1
349
350
351	end if
352	;***************************************************
353	; OPTIONAL --no_rows-- NUMBER OF ROWS
354	;
355	; number of plots in one column
356	;
357	; data type: integer
358	;
359	; example: no_rows = 2
360	;
361	; default: 2
362	;***************************************************
363	if(.not. isvar("no_rows"))then
364
365
366	no_rows = 2
367
368
369	end if
370	;***************************************************
371	; OPTIONAL --sort-- TYPE OF SORTING
372	;
373	; sequence of plots; sorting either by time step [="time"] or
374	; by layer/height [="layer"]
375	;
376	; data type: string
377	;
378	; example: sort = "layer"
379	;
380	; default: "layer"
381	;***************************************************
382	if(.not. isvar("sort"))then
383
384
385	sort = "layer"
386
387
388	end if
389	;***************************************************
390	; OPTIONAL --mode-- TYPE OF PLOT
391	;
392	; isoline plots [="Line"], contour plots [="Fill"] or both [="Both"]
393	; can be choosen
394	;
395	; data type: string
396	;
397	; example: mode = "Fill"
398	;
399	; default: "Fill"
400	;***************************************************
401	if(.not. isvar("mode"))then
402
403
404	mode = "Fill"
405
406
407	end if
408	;***************************************************
409	; OPTIONAL --fill_mode-- TYPE OF FILLING
410	;
411	; area fill [="AreaFill"], raster fill [="RasterFill"] or
412	; cell fill [="CellFill"] can be choosen
413	;
414	; data type: string
415	;
416	; example: fill_mode = "AreaFill"
417	;
418	; default: "RasterFill"
419	;***************************************************
420	if(.not. isvar("fill_mode"))then
421
422
423	fill_mode = "RasterFill"
424
425
426	end if
427	;***************************************************
428	; OPTIONAL --shape-- ASPECT RATIO
429	;
430	; aspect ratio of axis is kept [=1] or not[=0]
431	;
432	; data type: integer
433	;
434	; example: shape = 1
435	;
436	; default: 1
437	;***************************************************
438	if(.not. isvar("shape"))then
439
440
441	shape = 1
442
443
444	end if
445	;***************************************************
446	; OPTIONAL --font_size-- FONT SIZE OF STRINGS
447	;
448	; font size can be changed to fit to the current plot
449	;
450	; data type: float
451	;
452	; example: font_size = 0.04
453	;
454	; default: 0.04
455	;***************************************************
456	if(.not. isvar("font_size"))then
457
458
459	font_size = 0.04
460
461
462	end if
463	;***************************************************
464	; OPTIONAL --font_size_legend-- FONT SIZE OF LEGEND STRINGS
465	;
466	; font size of the legend can be changed to fit to the current plot
467	;
468	; data type: float
469	;
470	; example: font_size_legend = 0.04
471	;
472	; default: 0.04
473	;***************************************************
474	if(.not. isvar("font_size_legend"))then
475
476
477	font_size_legend = 0.04
478
479
480	end if
481	;***************************************************
482	; OPTIONAL --legend_label_stride-- REDUCTION OF THE NUMBER
483	; OF LABELS IN THE LEGEND
484	;
485	; if legend_label_stride is set to 1 every label is shown;
486	; if set to 2 every second, ...
487	;
488	; data type: integer
489	;
490	; example: legend_label_stride = 2
491	;
492	; default: 2
493	;***************************************************
494	if(.not. isvar("legend_label_reduction"))then
495
496
497	legend_label_stride = 2
498
499
500	end if
501	;***************************************************
502	; OPTIONAL --axes_explicit--
503	; EXPLICIT SETTINGS OF X- AND Y-AXES ARE SWITCHED ON
504	;
505	; to use several parameters to set up the axes, 'axes_explicit'
506	; must be switched on [=1]; if switched off [=0] units of axes are [m]
507	;
508	; data type: integer
509	;
510	; example: axes_explicit = 0
511	;
512	; default: 0
513	;***************************************************
514	if(.not. isvar("axes_explicit"))then
515
516
517	axes_explicit = 0
518
519
520	end if
521	;***************************************************
522	; OPTIONAL if axes_explicit = 1 --major_ticks_x--
523	; NUMBER OF MAJOR TICK MARKS AT X-AXIS
524	;
525	; major_ticks_x can be set to any integer, best segmentation of x-axis
526	; can be achieved, if
527	; (number of gripdpoints in x-direction)/(major_ticks_x-1)=INTEGER,
528	; e.g. 128/8 = 16 -> major_ticks_x should be set to 9
529	;
530	; data type: integer
531	;
532	; example: major_ticks_x = 6
533	;
534	; default: 6
535	;***************************************************
536	if(.not. isvar("major_ticks_x"))then
537
538
539	major_ticks_x = 6
540
541
542	end if
543	;***************************************************
544	; OPTIONAL if axes_explicit = 1 --major_ticks_y--
545	; NUMBER OF MAJOR TICK MARKS AT Y-AXIS
546	;
547	; major_ticks_y can be set to any integer, best segmentation of y-axis
548	; can be achieved, if
549	; (number of gripdpoints in y-direction)/(major_ticks_y-1)=INTEGER,
550	; e.g. 128/8 = 16 -> major_ticks_y should be set to 9
551	;
552	; data type: integer
553	;
554	; example: major_ticks_y = 6
555	;
556	; default: 6
557	;***************************************************
558	if(.not. isvar("major_ticks_y"))then
559
560
561	major_ticks_y = 6
562
563
564	end if
565	;***************************************************
566	; OPTIONAL if axes_explicit = 1 --norm_x--norm_y--norm_z--
567	; NORMALISE X-, Y- and Z-AXES
568	;
569	; normalising the axes with the given value;
570	; units can explicitly be set;
571	; by default no normalising is used and units are [meter]
572	;
573	; data type: float
574	;
575	; default: 1.0
576	;***************************************************
577	if(.not. isvar("norm_x"))then
578
579	norm_x = 1.0
580
581	end if
582	if(.not. isvar("norm_y"))then
583
584	norm_y = 1.0
585
586	end if
587	if(.not. isvar("norm_z"))then
588
589	norm_z = 1.0
590
591	end if
592	;***************************************************
593	; OPTIONAL if axes_explicit = 1 --unit_x--unit_y--unit_z--
594	; UNITS OF X-, Y- and Z-AXES
595	;
596	; units of the axes can be set; by default no units are given,
597	; if norm_x, norm_y or norm_z are unequal 1., otherwise units are [meter]
598	;
599	; data type: string,
600	;
601	; example: unit_x = "m/s"
602	;
603	; default: " "
604	;***************************************************
605	if(.not. isvar("unit_x"))then
606
607	unit_x = " "
608
609	end if
610	if(.not. isvar("unit_y"))then
611
612	unit_y = " "
613
614	end if
615	if(.not. isvar("unit_z"))then
616
617	unit_z = " "
618
619	end if
620	;***************************************************
621	; OPTIONAL --vector-- VECTOR PLOT
622	;
623	; a vector plot for one defined vector is switched on [=1] or off [=0]
624	;
625	; data type: integer
626	;
627	; example: vector = 0
628	;
629	; default: 0
630	;***************************************************
631	if(.not. isvar("vector"))then
632
633
634	vector = 0
635
636
637	end if
638	;***************************************************
639	; REQUIRED IF vector=1 --vec1, vec2-- VECTOR FOR VECTOR PLOT
640	;
641	; variables for the vector, vec1 hast to be set to component 1 and
642	; vec2 to component 2;
643	; inidcate them with one comma before and after each variable;
644	;
645	; data type: string
646	;
647	; example: vec1=",u,"
648	; vec2=",v,"
649	;
650	; default: vec1 = "component1", vec2 = "component2"
651	;***************************************************
652	if(.not. isvar("vec1"))then
653
654	vec1 = "component1"
655
656	end if
657	if (.not. isvar("vec2"))then
658
659	vec2 = "component2"
660
661	end if
662	;***************************************************
663	; OPTIONAL --plotvec-- VARIABLE FOR EXTRA VECTOR PLOT
664	;
665	; the vector plot can be combined with other plots of variables;
666	; if this is desired inidcate the variables,
667	; where a vector plot shall overlay; inidcate them with one comma
668	; before and after each variable
669	;
670	; data type: string
671	;
672	; example: plotvec = ",u,w,"
673	;
674	; default: "plotvec" (no combining,
675	; the vector plot is created seperately)
676	;***************************************************
677	if(.not. isvar("plotvec"))then
678
679
680	plotvec = "plotvec"
681
682
683	end if
684	;***************************************************
685	; OPTIONAL --ref_mag-- REFERENCE VECTOR
686	;
687	; length of the reference vector in a vector plot
688	;
689	; data type: float
690	;
691	; example: ref_mag = 0.05
692	;
693	; default: 0.05
694	;***************************************************
695	if(.not. isvar("ref_mag"))then
696
697
698	ref_mag = 0.05
699
700
701	end if
702	;***************************************************
703
704	end if
705
706	;******************************************************
707	; parameters used by PROFILES
708	;******************************************************
709
710	if (script .EQ. "profiles")then
711
712	;***************************************************
713	; REQUIRED --file_1-- 1ST INPUT FILE
714	;
715	; 1st input file produced by PALM; if there is more than one file for
716	; all timesteps of a job chain, declare path and file name without
717	; cycle number and ".nc" (first and last cycle numbers are given with
718	; the parameters 'start_f' and 'end_f');
719	; otherwise declare path and full file name
720	;
721	; data type: string
722	;
723	; example: file_1 = "/path_to_file/file_pr"
724	; if you use more than one cycle number
725	; file_1 = "/path_to_file/file_pr.4.nc"
726	; if you use one file (e.g. with cycle number 4)
727	;
728	; default: "File in"
729	;***************************************************
730	if(.not. isvar("file_1"))then
731
732
733	file_1 = "File in"
734
735
736	end if
737	;***************************************************
738	; OPTIONAL/REQUIRED --start_f-- if more than one file of a job chain
739	; START OF CYCLIC NUMBER OF THE 1ST INPUT FILE
740	;
741	; if there is more than one file for all timesteps of a job chain,
742	; declare the first cyclicnumber which contains timesteps
743	; you'd like to use
744	;
745	; data type: integer
746	;
747	; example: 3 (if first file: example_pr.3.nc) and
748	; 0 (if first file: example_pr.nc)
749	;
750	; default: -1
751	;***************************************************
752	if (.not. isvar("start_f"))then
753
754
755	start_f = -1
756
757
758	end if
759	;***************************************************
760	; OPTIONAL/REQUIRED --end_f-- if more than one file of a job chain
761	; END OF CYCLIC NUMBER OF THE 1ST INPUT FILE
762	;
763	; if there is more than one file for all timesteps of a job chain,
764	; declare the last cyclicnumber which contains timesteps
765	; you'd like to use
766	;
767	; data type: integer
768	;
769	; example: 48 (if last file: example_pr.48.nc) and
770	; 0 (if last file: example_pr.nc)
771	;
772	; default: -1
773	;***************************************************
774	if (.not. isvar("end_f"))then
775
776
777	end_f = -1
778
779
780	end if
781	;***************************************************
782	; OPTIONAL --format_out-- OUTPUT FORMAT
783	;
784	; supported file formats: x11, pdf, ps, eps, epsi, ncgm or png
785	;
786	; data type: string
787	;
788	; default: "x11"
789	;***************************************************
790	if (.not. isvar("format_out"))then
791
792
793	format_out = "x11"
794
795
796	end if
797	;***************************************************
798	; OPTIONAL --file_out-- OUTPUT FILE
799	;
800	; declare path and name of the output file
801	;
802	; data type: string
803	;
804	; default: "~/test_pr"
805	;***************************************************
806	if (.not. isvar("file_out"))then
807
808
809	file_out = "~/test_pr"
810
811
812	end if
813	;***************************************************
814	; OPTIONAL --var-- OUTPUT VARIABLES
815	;
816	; names of output variables;
817	; inidcate them with one comma before and after each variable
818	; if the name contains double quotes (") use dq and the '+' operation to
819	; concatenate the strings
820	;
821	; data type: string
822	;
823	; example: var = ",u,v,w,wpt,w"+dq+"pt"+dq+",wpt,"
824	;
825	; default: "all" (all available variables are plotted)
826	;***************************************************
827	if (.not. isvar("var"))then
828
829
830	var = "all"
831
832
833	end if
834	;***************************************************
835	; OPTIONAL --start_time_step-- FIRST TIME STEP
836	;
837	; first time step of plot; there is no need to specify a precise
838	; time value from the input file,
839	; 'start_time_step' is rounded to the next existent time step
840	;
841	; data type: double; dimension: [hour]
842	;
843	; example: start_time_step = 0.5d
844	;
845	; default: -1.d (first available time step)
846	;***************************************************
847	if (.not. isvar("start_time_step"))then
848
849
850	start_time_step = -1.d
851
852
853	end if
854	;***************************************************
855	; OPTIONAL --end_time_step-- LAST TIME STEP
856	;
857	; last time step of plot; there is no need to specify a precise
858	; time value from the input file,
859	; 'end_time_step' is rounded to the next existent time step
860	;
861	; data type: double; dimension: [hour]
862	;
863	; example: end_time_step = 2.0d
864	;
865	; default: -1.d (last available time step)
866	;***************************************************
867	if (.not. isvar("end_time_step"))then
868
869
870	end_time_step = -1.d
871
872
873	end if
874	;***************************************************
875	; OPTIONAL --time_stride-- TEMPORAL STRIDE
876	;
877	; temporal stride for the plots; if time_stride=1 all the profiles
878	; between first_time_step and end_time_step are plotted
879	; (including first_time_step and end_time_step),
880	; if time_stride=3 every third time step between start_time_step and
881	; end_time_step is plotted
882	;
883	; data type: integer
884	;
885	; example: time_stride = 3
886	;
887	; default: 1
888	;***************************************************
889	if (.not. isvar("time_stride"))then
890
891
892	time_stride = 1
893
894
895	end if
896	;***************************************************
897	; OPTIONAL --xs-- MINIMUM X-AXIS
898	;
899	; value for minimum of x-axis
900	;
901	; data type: float; dimension of variable
902	;
903	; example: xs = 300. (e.g. if var=",pt")
904	;
905	; default: -1. (minimum of range)
906	;***************************************************
907	if (.not. isvar("xs"))then
908
909
910	xs = -1.
911
912
913	end if
914	;***************************************************
915	; OPTIONAL --xe-- MAXIMUM X-AXIS
916	;
917	; value for maximum of x-axis
918	;
919	; data type: float; dimension of variable
920	;
921	; example: xe = 302. (e.g. if var=",pt")
922	;
923	; default: -1. (maximum of range)
924	;***************************************************
925	if (.not. isvar("xe"))then
926
927
928	xe = -1.
929
930
931	end if
932	;***************************************************
933	; OPTIONAL --min_z-- MINIMUM Z-AXIS
934	;
935	; value for minimum height of z-axis
936	;
937	; data type: double; dimension: [meter]
938	;
939	; example: min_z = 0.0d
940	;
941	; default: -1.d (related to the minimum of z-axis in input file)
942	;***************************************************
943	if (.not. isvar("min_z"))then
944
945
946	min_z = -1.d
947
948
949	end if
950	;***************************************************
951	; OPTIONAL --max_z-- MAXIMUM Z-AXIS
952	;
953	; value for maximum height of z-axis
954	;
955	; data type: double; dimension: [meter]
956	;
957	; example: max_z = 1000.0d
958	;
959	; default: -1.d (related to the maximum of z-axis in input file)
960	;***************************************************
961	if (.not. isvar("max_z"))then
962
963
964	max_z = -1.d
965
966
967	end if
968	;***************************************************
969	; OPTIONAL --start_x-- STARTVALUE IN X-DIRECTION
970	;
971	; if 3D data is used for profiles you can choose a startvalue
972	; in x-direction for horizontal averaging
973	;
974	; data type: integer; dimension [grippoint]
975	;
976	; example: start_x = 0
977	;
978	; default: 0 (minimum of range)
979	;***************************************************
980	if (.not. isvar("start_x"))then
981
982
983	start_x = 0
984
985
986	end if
987	;***************************************************
988	; OPTIONAL --end_x-- ENDVALUE IN X-DIRECTION
989	;
990	; if 3D data is used for profiles you can choose an endvalue
991	; in x-direction for horizontal averaging
992	;
993	; data type: integer; dimension [grippoint]
994	;
995	; example: end_x = 200
996	;
997	; default: -1 (maximum of range excluding ghostpoint)
998	;***************************************************
999	if (.not. isvar("end_x"))then
1000
1001
1002	end_x = -1
1003
1004
1005	end if
1006	;***************************************************
1007	; OPTIONAL --start_y-- STARTVALUE IN Y-DIRECTION
1008	;
1009	; if 3D data is used for profiles you can choose a startvalue
1010	; in y-direction for horizontal averaging
1011	;
1012	; data type: integer; dimension [grippoint]
1013	;
1014	; example: start_y = 0
1015	;
1016	; default: 0 (minimum of range)
1017	;***************************************************
1018	if (.not. isvar("start_y"))then
1019
1020
1021	start_y = 0
1022
1023
1024	end if
1025	;***************************************************
1026	; OPTIONAL --end_y-- ENDVALUE IN Y-DIRECTION
1027	;
1028	; if 3D data is used for profiles you can choose an endvalue
1029	; in y-direction for horizontal averaging
1030	;
1031	; data type: integer; dimension [grippoint]
1032	;
1033	; example: end_y = 200
1034	;
1035	; default: -1 (maximum of range excluding ghostpoint)
1036	;***************************************************
1037	if (.not. isvar("end_y"))then
1038
1039
1040	end_y = -1
1041
1042
1043	end if
1044	;***************************************************
1045	; OPTIONAL --no_columns-- NUMBER OF COLUMNS
1046	;
1047	; number of plots in one row
1048	;
1049	; data type: integer
1050	;
1051	; default: 1
1052	;***************************************************
1053	if (.not. isvar("no_columns"))then
1054
1055
1056	no_columns = 1
1057
1058
1059	end if
1060	;***************************************************
1061	; OPTIONAL --no_rows-- NUMBER OF ROWS
1062	;
1063	; number of plots in one column
1064	;
1065	; data type: integer
1066	;
1067	; default: 2
1068	;***************************************************
1069	if (.not. isvar("no_rows"))then
1070
1071
1072	no_rows = 2
1073
1074
1075	end if
1076	;***************************************************
1077	; OPTIONAL --log_z-- LOGARITHMIC SCALE OF Z-AXIS
1078	;
1079	; logarithmic scale for z-axis is switched on [=1] or off [=0]
1080	;
1081	; data type: integer
1082	;
1083	; example: log_z = 0
1084	;
1085	; default: 0
1086	;***************************************************
1087	if (.not. isvar("log_z"))then
1088
1089
1090	log_z = 0
1091
1092
1093	end if
1094	;***************************************************
1095	; OPTIONAL --norm_z-- NORMALISING Z-AXIS
1096	;
1097	; value for normalising the z-axis
1098	;
1099	; data type: float
1100	;
1101	; example: norm_z = 1.
1102	;
1103	; default: 1. (no normalising)
1104	;***************************************************
1105	if (.not. isvar("norm_z"))then
1106
1107
1108	norm_z = 1.
1109
1110
1111	end if
1112	;***************************************************
1113	; OPTIONAL --over-- OVERLAYING
1114	;
1115	; predefined overlaying of standard variables is switched
1116	; on [=1] or off [=0];
1117	; this feature cannot be used with statistic regions
1118	;
1119	; data type: integer
1120	;
1121	; example: over = 0
1122	;
1123	; default: 0
1124	;***************************************************
1125	if (.not. isvar("over"))then
1126
1127
1128	over = 0
1129
1130
1131	end if
1132	;***************************************************
1133	; OPTIONAL --combine-- COMBINING
1134	;
1135	; combining of two or three individual variables is possible and
1136	; switched on [=1] or off[=0]
1137	;
1138	; data type: integer
1139	;
1140	; example: combine = 0
1141	;
1142	; default: 0
1143	;***************************************************
1144	if (.not. isvar("combine"))then
1145
1146
1147	combine = 0
1148
1149
1150	end if
1151	;***************************************************
1152	; REQUIRED IF combine=1 --number_comb-- NUMBER FOR COMBINING
1153	;
1154	; number of variables for combining; 2 or 3 is valid
1155	;
1156	; data type: integer
1157	;
1158	; example: number_comb = 2
1159	;
1160	; default: -1
1161	;***************************************************
1162	if (.not. isvar("number_comb"))then
1163
1164
1165	number_comb = -1
1166
1167
1168	end if
1169	;***************************************************
1170	; REQUIRED IF combine=1 --c_var-- VARIABLES FOR COMBINING
1171	;
1172	; names of variables;
1173	; inidcate them with one comma before and after each variable
1174	; if the name contains double quotes (") use dq and the '+' operation to
1175	; concatenate the strings
1176	;
1177	; data type: string
1178	;
1179	; example: c_var = ",u,v,w,wpt,w"+dq+"pt"+dq+",wpt,"
1180	;
1181	; default: "c_variables"
1182	;***************************************************
1183	if (.not. isvar("c_var"))then
1184
1185
1186	c_var = "c_variables"
1187
1188
1189	end if
1190	;***************************************************
1191	; OPTIONAL --black-- BLACK OR COLOR LINES
1192	;
1193	; colored [=0] or black and white [=1] plots
1194	;
1195	; data type: integer
1196	;
1197	; example: black = 0
1198	;
1199	; default: 0
1200	;***************************************************
1201	if (.not. isvar("black"))then
1202
1203
1204	black = 0
1205
1206
1207	end if
1208	;***************************************************
1209	; OPTIONAL --dash-- DASHED LINES
1210	;
1211	; use of different line patterns [=1] or continous lines [=0]
1212	; for different time steps
1213	;
1214	; data type: integer
1215	;
1216	; example: dash = 0
1217	;
1218	; default: 0
1219	;***************************************************
1220	if (.not. isvar("dash"))then
1221
1222
1223	dash = 0
1224
1225
1226	end if
1227	;***************************************************
1228	; OPTIONAL --font_size-- FONT SIZE OF STRINGS
1229	;
1230	; font size can be changed to fit to the current plot
1231	;
1232	; data type: float
1233	;
1234	; example: font_size = 0.02
1235	;
1236	; default: 0.02
1237	;***************************************************
1238	if(.not. isvar("font_size"))then
1239
1240
1241	font_size = 0.02
1242
1243
1244	end if
1245	;***************************************************
1246	; OPTIONAL --legend-- SWITCHES ON A LEGEND
1247	;
1248	; a legend is switched on [=1] or off [=0]
1249	;
1250	; data type: integer
1251	;
1252	; example: legend = 1
1253	;
1254	; default: 1
1255	;***************************************************
1256	if (.not. isvar("legend"))then
1257
1258
1259	legend = 1
1260
1261
1262	end if
1263	;***************************************************
1264	; OPTIONAL --font_size_legend-- FONT SIZE OF LEGEND STRINGS
1265	;
1266	; font size of the legend can be changed to fit to the current plot
1267	;
1268	; data type: float
1269	;
1270	; example: font_size_legend = 0.02
1271	;
1272	; default: 0.02
1273	;***************************************************
1274	if(.not. isvar("font_size_legend"))then
1275
1276
1277	font_size_legend = 0.02
1278
1279
1280	end if
1281	;***************************************************
1282	; OPTIONAL ---no_files-- NUMBER OF INPUT FILES
1283	;
1284	; up to 6 input files of different runs can be used; all input files
1285	; must contain the same variables and dimensionalties;
1286	; identical variables are merged in one plot;
1287	; combining or overlaying of any variables is not feasible;
1288	; an extra legend (besides the time step legend) is drawn where you
1289	; can explicitily name the items
1290	;
1291	; data type: integer
1292	;
1293	; default: 1
1294	;***************************************************
1295	if (.not. isvar("no_files"))then
1296
1297
1298	no_files = 1
1299
1300
1301	end if
1302	;***************************************************
1303	; OPTIONAL --name_legend_1-- 1st LEGEND ITEM
1304	;
1305	; if no_files > 1: name of 1st item in extra legend
1306	;
1307	; data type: string
1308	;
1309	; default: "File 1"
1310	;***************************************************
1311	if (.not. isvar("name_legend_1"))then
1312
1313
1314	name_legend_1 = "File 1"
1315
1316
1317	end if
1318	;***************************************************
1319	; REQUIRED if no_files > 1 --file_2-- 2ND INPUT FILE
1320	;
1321	; 2nd input file produced by PALM; if there is more than one file
1322	; for all timesteps of a job chain,
1323	; declare path and file name without cycle number and ".nc" (first and
1324	; last cycle numbers are given with the parameters
1325	; 'start_f' and 'end_f');
1326	; otherwise declare path and full file name
1327	;
1328	; data type: string
1329	;
1330	; example: file_2 = "/path_to_file/file_pr"
1331	; if you use more than one cycle number
1332	; file_2 = "/path_to_file/file_pr.4.nc"
1333	; if you use one file (e.g. with cycle number 4)
1334	;
1335	; default: "File in"
1336	;***************************************************
1337	if(.not. isvar("file_2"))then
1338
1339
1340	file_2 = "File in"
1341
1342
1343	end if
1344	;***************************************************
1345	; OPTIONAL/REQUIRED --start_f_2-- if more than one file of a job chain
1346	; START OF CYCLIC NUMBER OF THE 2ND INPUT FILE
1347	;
1348	; if there is more than one file for all timesteps of a job chain,
1349	; declare the first cyclicnumber which contains timesteps
1350	; you'd like to use
1351	;
1352	; data type: integer
1353	;
1354	; example: 3 (if first file: example_ts.3.nc)
1355	;
1356	; default: -1
1357	;***************************************************
1358	if (.not. isvar("start_f_2"))then
1359
1360
1361	start_f_2 = -1
1362
1363
1364	end if
1365	;***************************************************
1366	; REQUIRED --end_f_2-- if more than one file of a job chain
1367	; END OF CYCLIC NUMBER OF THE 2ND INPUT FILE
1368	;
1369	; if there is more than one file for all timesteps of a job chain,
1370	; declare the last cyclicnumber which contains timesteps
1371	; you'd like to use
1372	;
1373	; data type: integer
1374	;
1375	; example: 48 (if last file: example_ts.48.nc)
1376	;
1377	; default: -1
1378	;***************************************************
1379	if (.not. isvar("end_f_2"))then
1380
1381
1382	end_f_2 = -1
1383
1384
1385	end if
1386	;***************************************************
1387	; OPTIONAL --name_legend_2-- 2nd LEGEND ITEM
1388	;
1389	; if no_files > 1: name of 2nd item in extra legend
1390	;
1391	; data type: string
1392	;
1393	; default: "File 2"
1394	;***************************************************
1395	if (.not. isvar("name_legend_2"))then
1396
1397
1398	name_legend_2 = "File 2"
1399
1400
1401	end if
1402	;***************************************************
1403	; REQUIRED if no_files > 2 --file_3-- 3RD INPUT FILE
1404	;
1405	; 3rd input file produced by PALM; if there is more than one file
1406	; for all timesteps of a job chain,
1407	; declare path and file name without cycle number and ".nc" (first and
1408	; last cycle numbers are given with the parameters
1409	; 'start_f' and 'end_f');
1410	; otherwise declare path and full file name
1411	;
1412	; data type: string
1413	;
1414	; example: file_3 = "/path_to_file/file_pr"
1415	; if you use more than one cycle number
1416	; file_3 = "/path_to_file/file_pr.4.nc"
1417	; if you use one file (e.g. with cycle number 4)
1418	;
1419	; default: "File in"
1420	;***************************************************
1421	if(.not. isvar("file_3"))then
1422
1423
1424	file_3 = "File in"
1425
1426
1427	end if
1428	;***************************************************
1429	; OPTIONAL/REQUIRED --start_f_3-- if more than one file of a job chain
1430	; START OF CYCLIC NUMBER OF THE 3RD INPUT FILE
1431	;
1432	; if there is more than one file for all timesteps of a job chain,
1433	; declare the first cyclicnumber which contains timesteps
1434	; you'd like to use
1435	;
1436	; data type: integer
1437	;
1438	; example: 3 (if first file: example_ts.3.nc)
1439	;
1440	; default: -1
1441	;***************************************************
1442	if (.not. isvar("start_f_3"))then
1443
1444
1445	start_f_3 = -1
1446
1447
1448	end if
1449	;***************************************************
1450	; OPTIONAL/REQUIRED --end_f_3-- if more than one file of a job chain
1451	; END OF CYCLIC NUMBER OF THE 3RD INPUT FILE
1452	;
1453	; if there is more than one file for all timesteps of a job chain,
1454	; declare
1455	; the last cyclicnumber which contains timesteps you'd like to use
1456	;
1457	; data type: integer
1458	;
1459	; example: 48 (if last file: example_ts.48.nc)
1460	;
1461	; default: -1
1462	;***************************************************
1463	if (.not. isvar("end_f_3"))then
1464
1465
1466	end_f_3 = -1
1467
1468
1469	end if
1470	;***************************************************
1471	; OPTIONAL --name_legend_3-- 3rd LEGEND ITEM
1472	;
1473	; if no_files > 2: name of 3rd item in extra legend
1474	;
1475	; data type: string
1476	;
1477	; default: "File 3"
1478	;***************************************************
1479	if (.not. isvar("name_legend_3"))then
1480
1481
1482	name_legend_3 = "File 3"
1483
1484
1485	end if
1486	;***************************************************
1487	; REQUIRED if no_files > 3 --file_4-- 4TH INPUT FILE
1488	;
1489	; 4th input file produced by PALM; if there is more than one file for
1490	; all timesteps of a job chain,
1491	; declare path and file name without cycle number and ".nc" (first and
1492	; last cycle numbers are given with the parameters
1493	; 'start_f' and 'end_f');
1494	; otherwise declare path and full file name
1495	;
1496	; data type: string
1497	;
1498	; example: file_4 = "/path_to_file/file_pr"
1499	; if you use more than one cycle number
1500	; file_4 = "/path_to_file/file_pr.4.nc"
1501	; if you use one file (e.g. with cycle number 4)
1502	;
1503	; default: "File in"
1504	;***************************************************
1505	if(.not. isvar("file_4"))then
1506
1507
1508	file_4 = "File in"
1509
1510
1511	end if
1512	;***************************************************
1513	; OPTIONAL/REQUIRED --start_f_4-- if more than one file of a job chain
1514	; START OF CYCLIC NUMBER OF THE 4TH INPUT FILE
1515	;
1516	; if there is more than one file for all timesteps of a job chain,
1517	; declare the first cyclicnumber which contains timesteps
1518	; you'd like to use
1519	;
1520	; data type: integer
1521	;
1522	; example: 3 (if first file: example_ts.3.nc)
1523	;
1524	; default: -1
1525	;***************************************************
1526	if (.not. isvar("start_f_4"))then
1527
1528
1529	start_f_4 = -1
1530
1531
1532	end if
1533	;***************************************************
1534	; OPTIONAL/REQUIRED --end_f_4-- if more than one file of a job chain
1535	; END OF CYCLIC NUMBER OF THE 4TH INPUT FILE
1536	;
1537	; if there is more than one file for all timesteps of a job chain,
1538	; declare the last cyclicnumber which contains timesteps
1539	; you'd like to use
1540	;
1541	; data type: integer
1542	;
1543	; example: 48 (if last file: example_ts.48.nc)
1544	;
1545	; default: -1
1546	;***************************************************
1547	if (.not. isvar("end_f_4"))then
1548
1549
1550	end_f_4 = -1
1551
1552
1553	end if
1554	;***************************************************
1555	; OPTIONAL --name_legend_4-- 4th LEGEND ITEM
1556	;
1557	; if no_files > 3: name of 4th item in extra legend
1558	;
1559	; data type: string
1560	;
1561	; default: "File 4"
1562	;***************************************************
1563	if (.not. isvar("name_legend_4"))then
1564
1565
1566	name_legend_4 = "File 4"
1567
1568
1569	end if
1570	;***************************************************
1571	; REQUIRED if no_files > 4 --file_5-- 5TH INPUT FILE
1572	;
1573	; 5th input file produced by PALM; if there is more than one file for
1574	; all timesteps of a job chain,
1575	; declare path and file name without cycle number and ".nc" (first and
1576	; last cycle numbers are given with the parameters
1577	; 'start_f' and 'end_f');
1578	; otherwise declare path and full file name
1579	;
1580	; data type: string
1581	;
1582	; example: file_5 = "/path_to_file/file_pr"
1583	; if you use more than one cycle number
1584	; file_5 = "/path_to_file/file_pr.4.nc"
1585	; if you use one file (e.g. with cycle number 4)
1586	;
1587	; default: "File in"
1588	;***************************************************
1589	if(.not. isvar("file_5"))then
1590
1591
1592	file_5 = "File in"
1593
1594
1595	end if
1596	;***************************************************
1597	; OPTIONAL/REQUIRED --start_f_5-- if more than one file of a job chain
1598	; START OF CYCLIC NUMBER OF THE 5TH INPUT FILE
1599	;
1600	; if there is more than one file for all timesteps of a job chain,
1601	; declare the first cyclicnumber which contains timesteps
1602	; you'd like to use
1603	;
1604	; data type: integer
1605	;
1606	; example: 3 (if first file: example_ts.3.nc)
1607	;
1608	; default: -1
1609	;***************************************************
1610	if (.not. isvar("start_f_5"))then
1611
1612
1613	start_f_5 = -1
1614
1615
1616	end if
1617	;***************************************************
1618	; OPTIONAL/REQUIRED --end_f_5-- if more than one file of a job chain
1619	;END OF CYCLIC NUMBER OF THE 5TH INPUT FILE
1620	;
1621	; if there is more than one file for all timesteps of a job chain,
1622	; declare the last cyclicnumber which contains timesteps
1623	; you'd like to use
1624	;
1625	; data type: integer
1626	;
1627	; example: 48 (if last file: example_ts.48.nc)
1628	;
1629	; default: -1
1630	;***************************************************
1631	if (.not. isvar("end_f_5"))then
1632
1633
1634	end_f_5 = -1
1635
1636
1637	end if
1638	;***************************************************
1639	; OPTIONAL --name_legend_5-- 5th LEGEND ITEM
1640	;
1641	; if no_files > 4: name of 5th item in extra legend
1642	;
1643	; data type: string
1644	;
1645	; default: "File 5"
1646	;***************************************************
1647	if (.not. isvar("name_legend_5"))then
1648
1649
1650	name_legend_5 = "File 5"
1651
1652
1653	end if
1654	;***************************************************
1655	; REQUIRED if no_files > 5 --file_6-- 6TH INPUT FILE
1656	;
1657	; 6th input file produced by PALM; if there is more than one file for
1658	; all timesteps of a job chain,
1659	; declare path and file name without cycle number and ".nc" (first and
1660	; last cycle numbers are given with the parameters
1661	; 'start_f' and 'end_f');
1662	; otherwise declare path and full file name
1663	;
1664	; data type: string
1665	;
1666	; example: file_6 = "/path_to_file/file_pr"
1667	; if you use more than one cycle number
1668	; file_6 = "/path_to_file/file_pr.4.nc"
1669	; if you use one file (e.g. with cycle number 4)
1670	;
1671	; default: "File in"
1672	;***************************************************
1673	if(.not. isvar("file_6"))then
1674
1675
1676	file_6 = "File in"
1677
1678
1679	end if
1680	;***************************************************
1681	; OPTIONAL/REQUIRED --start_f_6-- if more than one file of a job chain
1682	; START OF CYCLIC NUMBER OF THE 6TH INPUT FILE
1683	;
1684	; if there is more than one file for all timesteps of a job chain,
1685	; declare the first cyclicnumber which contains timesteps
1686	; you'd like to use
1687	;
1688	; data type: integer
1689	;
1690	; example: 3 (if first file: example_ts.3.nc)
1691	;
1692	; default: -1
1693	;***************************************************
1694	if (.not. isvar("start_f_6"))then
1695
1696
1697	start_f_6 = -1
1698
1699
1700	end if
1701	;***************************************************
1702	; OPTIONAL/REQUIRED --end_f_6-- if more than one file of a job chain
1703	; END OF CYCLIC NUMBER OF THE 6TH INPUT FILE
1704	;
1705	; if there is more than one file for all timesteps of a job chain,
1706	; declare the last cyclicnumber which contains timesteps
1707	; you'd like to use
1708	;
1709	; data type: integer
1710	;
1711	; example: 48 (if last file: example_ts.48.nc)
1712	;
1713	; default: -1
1714	;***************************************************
1715	if (.not. isvar("end_f_6"))then
1716
1717
1718	end_f_6 = -1
1719
1720
1721	end if
1722	;***************************************************
1723	; OPTIONAL --name_legend_6-- 6TH LEGEND ITEM
1724	;
1725	; if no_files > 5: name of 6th item in extra legend
1726	;
1727	; data type: string
1728	;
1729	; default: "File 6"
1730	;***************************************************
1731	if (.not. isvar("name_legend_6"))then
1732
1733
1734	name_legend_6 = "File 6"
1735
1736
1737	end if
1738	;***************************************************
1739	end if
1740
1741	;******************************************************
1742	; parameters used by SPECTRA
1743	;******************************************************
1744
1745	if (script .EQ. "spectra") then
1746
1747	;***************************************************
1748	; REQUIRED --file_1-- INPUT FILE
1749	;
1750	; input file produced by PALM; if there is more than one file for
1751	; all timesteps of a job chain,
1752	; declare path and file name without cycle number and ".nc" (first and
1753	; last cycle numbers are given with the parameters
1754	; 'start_f' and 'end_f');
1755	; otherwise declare path and full file name
1756	;
1757	; data type: string
1758	;
1759	; example: file_1 = "/path_to_file/file_sp"
1760	; if you use more than one cycle number
1761	; file_1 = "/path_to_file/file_sp.4.nc"
1762	; if you use one file (e.g. with cycle number 4)
1763	;
1764	; default: "File in"
1765	;***************************************************
1766	if(.not. isvar("file_1"))then
1767
1768
1769	file_1 = "File in"
1770
1771
1772	end if
1773	;***************************************************
1774	; OPTIONAL/REQUIRED if more than one file of a job chain
1775	; --start_f-- START OF CYCLIC NUMBER
1776	;
1777	; if there is more than one file for all timesteps of a job chain,
1778	; declare the first cyclicnumber which contains timesteps
1779	; you'd like to use
1780	;
1781	; data type: integer
1782	;
1783	; example: start_f = 3 (if first file: example_sp.3.nc) and
1784	; start_f = 0 (if first file: example_sp.nc)
1785	;
1786	; default: -1
1787	;***************************************************
1788	if (.not. isvar("start_f"))then
1789
1790
1791	start_f = -1
1792
1793
1794	end if
1795	;***************************************************
1796	; OPTIONAL/REQUIRED if more than one file of a job chain
1797	; --end_f-- END OF CYCLIC NUMBER
1798	;
1799	; if there is more than one file for all timesteps of a job chain,
1800	; declare the last cyclicnumber which contains timesteps
1801	; you'd like to use
1802	;
1803	; data type: integer
1804	;
1805	; example: end_f = 48 (if last file: example_sp.48.nc) and
1806	; end_f = 0 (if last file: example_sp.nc)
1807	;
1808	; default: -1
1809	;***************************************************
1810	if (.not. isvar("end_f"))then
1811
1812
1813	end_f = -1
1814
1815
1816	end if
1817	;***************************************************
1818	; OPTIONAL --format_out-- OUTPUT FORMAT
1819	;
1820	; format of the output file;
1821	; supported file formats: x11, pdf, ps, eps, epsi, ncgm or png
1822	;
1823	; data type: string
1824	;
1825	; example: format_out = "pdf"
1826	;
1827	; default: "x11"
1828	;***************************************************
1829	if (.not. isvar("format_out"))then
1830
1831
1832	format_out = "x11"
1833
1834
1835	end if
1836	;***************************************************
1837	; OPTIONAL --file_out-- OUTPUT FILE
1838	;
1839	; path and name of the output file
1840	;
1841	; data type: string
1842	;
1843	; example: file_out = "/home/path_to_output/test_sp"
1844	;
1845	; default: "~/test_sp"
1846	;***************************************************
1847	if (.not. isvar("file_out"))then
1848
1849
1850	file_out = "~/test_sp"
1851
1852
1853	end if
1854	;***************************************************
1855	; OPTIONAL --var-- OUTPUT VARIABLES
1856	;
1857	; names of output variables;
1858	; inidcate them with one comma before and after each variable
1859	; if the name contains double quotes (") use dq and the '+' operation to
1860	; concatenate the strings
1861	;
1862	; data type: string
1863	;
1864	; example: var = ",u,v,w,"
1865	;
1866	; default: "all" (all available variables are plotted)
1867	;***************************************************
1868	if (.not. isvar("var"))then
1869
1870
1871	var = "all"
1872
1873
1874	end if
1875	;***************************************************
1876	; OPTIONAL --start_time_step-- FIRST TIME STEP
1877	;
1878	; first time step of plot; there is no need to specify a precise
1879	; time value from the input file,
1880	; 'start_time_step' is rounded to the next existent time step
1881	;
1882	; data type: double; dimension: [hour]
1883	;
1884	; example: start_time_step = 0.5d
1885	;
1886	; default: -1.d (first available time step)
1887	;***************************************************
1888	if (.not. isvar("start_time_step"))then
1889
1890
1891	start_time_step = -1.d
1892
1893
1894	end if
1895	;***************************************************
1896	; OPTIONAL --end_time_step-- LAST TIME STEP
1897	;
1898	; last time step of plot; there is no need to specify a precise
1899	; time value from the input file,
1900	; 'end_time_step' is rounded to the next existent time step
1901	;
1902	; data type: double; dimension: [hour]
1903	;
1904	; example: end_time_step = 2.0d
1905	;
1906	; default: -1.d (last available time step)
1907	;***************************************************
1908	if (.not. isvar("end_time_step"))then
1909
1910
1911	end_time_step = -1.d
1912
1913
1914	end if
1915	;***************************************************
1916	; OPTIONAL --height_level-- HEIGHT LEVELS
1917	;
1918	; defines if all levels or selected levels are output;
1919	; a 1D array with up to 100 elements
1920	; from 0 to 99 must be indicated
1921	;
1922	; data type: integer array
1923	;
1924	; example: height_level=(/0,3,7/)
1925	;
1926	; default: (/-1/) (all levels are output)
1927	;***************************************************
1928	if (.not. isvar("height_level"))then
1929
1930
1931	height_level = (/-1/)
1932
1933
1934	end if
1935	;***************************************************
1936	; OPTIONAL --sort-- TYPE OF SORTING
1937	;
1938	; defines if all heights [="height"] or all timesteps [="time"]
1939	; are merged in one plot
1940	;
1941	; data type: string
1942	;
1943	; example: sort = "height"
1944	;
1945	; default: "height"
1946	;***************************************************
1947	if (.not. isvar("sort"))then
1948
1949
1950	sort = "height"
1951
1952
1953	end if
1954	;***************************************************
1955	; OPTIONAL --no_columns-- NUMBER OF COLUMNS
1956	;
1957	; number of plots in one row
1958	;
1959	; data type: integer
1960	;
1961	; example: no_columns = 1
1962	;
1963	; default: 1
1964	;***************************************************
1965	if (.not. isvar("no_columns"))then
1966
1967
1968	no_columns = 1
1969
1970
1971	end if
1972	;***************************************************
1973	; OPTIONAL --no_rows-- NUMBER OF ROWS
1974	;
1975	; number of plots in one column
1976	;
1977	; data type: integer
1978	;
1979	; example: no_rows = 2
1980	;
1981	; default: 2
1982	;***************************************************
1983	if (.not. isvar("no_rows"))then
1984
1985
1986	no_rows = 2
1987
1988
1989	end if
1990	;***************************************************
1991	; OPTIONAL --log_x-- LOGARITHMIC SCALE X-AXIS
1992	;
1993	; logarithmic scale for x-axis is switched on [=1] or off [=0]
1994	;
1995	; data type: integer
1996	;
1997	; example: log_x = 1
1998	;
1999	; default: 1
2000	;***************************************************
2001	if (.not. isvar("log_x"))then
2002
2003
2004	log_x = 1
2005
2006
2007	end if
2008	;***************************************************
2009	; OPTIONAL --log_y-- LOGARITHMIC SCALE Y-AXIS
2010	;
2011	; logarithmic scale for y-axis is switched on [=1] or off [=0]
2012	;
2013	; data type: integer
2014	;
2015	; example: log_y = 1
2016	;
2017	; default: 1
2018	;***************************************************
2019	if (.not. isvar("log_y"))then
2020
2021
2022	log_y = 1
2023
2024
2025	end if
2026	;***************************************************
2027	; OPTIONAL --norm_height-- NORMALISING X-AXIS WITH HEIGHT
2028	;
2029	; normalising the x-axis with the height of each spectra
2030	; is switched on [=1] or off [=0]
2031	;
2032	; data type: integer
2033	;
2034	; example: norm_height = 0
2035	;
2036	; default: 0 (no normalising)
2037	;***************************************************
2038	if (.not. isvar("norm_height"))then
2039
2040
2041	norm_height = 0
2042
2043
2044	end if
2045	;***************************************************
2046	; OPTIONAL --norm_x-- NORMALISING X-AXIS
2047	;
2048	; value for normalising the x-axis
2049	;
2050	; data type: float
2051	;
2052	; example: norm_x = 1.
2053	;
2054	; default: 1. (no normalising)
2055	;***************************************************
2056	if (.not. isvar("norm_x"))then
2057
2058
2059	norm_x = 1.
2060
2061
2062	end if
2063	;***************************************************
2064	; OPTIONAL --norm_y-- NORMALISE Y-AXIS
2065	;
2066	; value for normalising the y-axis
2067	;
2068	; data type: float
2069	;
2070	; example: norm_y = 1.
2071	;
2072	; default: 1. (no normalising)
2073	;***************************************************
2074	if (.not. isvar("norm_y"))then
2075
2076
2077	norm_y = 1.
2078
2079
2080	end if
2081	;***************************************************
2082	; OPTIONAL --unit_x--unit_y-- UNITS OF X-, Y-AXES
2083	;
2084	; unit of the x-axis can be set if norm_x is unequal 1,
2085	; otherwise the unit is [1/m]; by default no unit is set for the y-axis
2086	;
2087	; data type: string,
2088	;
2089	; example: unit_x = "100/m"
2090	;
2091	; default: " "
2092	;***************************************************
2093	if(.not. isvar("unit_x"))then
2094
2095	unit_x = " "
2096
2097	end if
2098	if(.not. isvar("unit_y"))then
2099
2100	unit_y = " "
2101
2102	end if
2103	;***************************************************
2104	; OPTIONAL --black-- BLACK OR COLOR LINES
2105	;
2106	; colored [=0] or black and white [=1] plots
2107	;
2108	; data type: integer
2109	;
2110	; example: black = 0
2111	;
2112	; default: 0
2113	;***************************************************
2114	if (.not. isvar("black"))then
2115
2116
2117	black = 0
2118
2119
2120	end if
2121	;***************************************************
2122	; OPTIONAL --dash-- DASHED LINES
2123	;
2124	; use of different line patterns [=1] or continous lines [=0]
2125	;
2126	; data type: integer
2127	;
2128	; example: dash = 0
2129	;
2130	; default: 0
2131	;***************************************************
2132	if (.not. isvar("dash"))then
2133
2134
2135	dash = 0
2136
2137
2138	end if
2139	;***************************************************
2140	; OPTIONAL --font_size-- FONT SIZE OF STRINGS
2141	;
2142	; font size can be changed to fit to the current plot
2143	;
2144	; data type: float
2145	;
2146	; example: font_size = 0.02
2147	;
2148	; default: 0.02
2149	;***************************************************
2150	if(.not. isvar("font_size"))then
2151
2152
2153	font_size = 0.02
2154
2155
2156	end if
2157	;***************************************************
2158	; OPTIONAL --font_size_legend-- FONT SIZE OF LEGEND STRINGS
2159	;
2160	; font size of the legend can be changed to fit to the current plot
2161	;
2162	; data type: float
2163	;
2164	; example: font_size_legend = 0.02
2165	;
2166	; default: 0.02
2167	;***************************************************
2168	if(.not. isvar("font_size_legend"))then
2169
2170
2171	font_size_legend = 0.02
2172
2173
2174	end if
2175	;***************************************************
2176
2177	end if
2178
2179	;******************************************************
2180	; parameters used by TIMESERIES
2181	;******************************************************
2182
2183	if (script .EQ. "timeseries") then
2184
2185	;***************************************************
2186	; REQUIRED --file_1-- INPUT FILE
2187	;
2188	; input file produced by PALM; if there is more than one file for
2189	; all timesteps of a job chain,
2190	; declare path and file name without cycle number and ".nc" (first and
2191	; last cycle numbers are given with the parameters
2192	; 'start_f' and 'end_f');
2193	; otherwise declare path and full file name
2194	;
2195	; data type: string
2196	;
2197	; example: file_1 = "/path_to_file/file_ts"
2198	; if you use more than one cycle number
2199	; file_1 = "/path_to_file/file_ts.4.nc"
2200	; if you use one file (e.g. with cycle number 4)
2201	;
2202	; default: "File in"
2203	;***************************************************
2204	if(.not. isvar("file_1"))then
2205
2206
2207	file_1 = "File in"
2208
2209
2210	end if
2211	;***************************************************
2212	; OPTIONAL/REQUIRED if more than one file of a job chain
2213	; --start_f-- START OF CYCLIC NUMBER
2214	;
2215	; if there is more than one file for all timesteps of a job chain,
2216	; declare the first cyclicnumber which contains timesteps
2217	; you'd like to use
2218	;
2219	; data type: integer
2220	;
2221	; example: start_f = 3 (if first file: example_ts.3.nc) and
2222	; start_f = 0 (if first file: example_ts.nc)
2223	;
2224	; default: -1
2225	;***************************************************
2226	if (.not. isvar("start_f"))then
2227
2228
2229	start_f = -1
2230
2231
2232	end if
2233	;***************************************************
2234	; OPTIONAL/REQUIRED if more than one file of a job chain
2235	; --end_f-- END OF CYCLIC NUMBER
2236	;
2237	; if there is more than one file for all timesteps of a job chain,
2238	; declare the last cyclicnumber which contains timesteps
2239	; you'd like to use
2240	;
2241	; data type: integer
2242	;
2243	; example: end_f = 48 (if last file: example_ts.48.nc) and
2244	; end_f = 0 (if last file: example_ts.nc)
2245	;
2246	; default: -1
2247	;***************************************************
2248	if (.not. isvar("end_f"))then
2249
2250
2251	end_f = -1
2252
2253
2254	end if
2255	;***************************************************
2256	; OPTIONAL --format_out-- OUTPUT FORMAT
2257	;
2258	; format of the output file;
2259	; supported file formats: x11, pdf, ps, eps, epsi, ncgm or png
2260	;
2261	; data type: string
2262	;
2263	; example: format_out = "pdf"
2264	;
2265	; default: "x11"
2266	;***************************************************
2267	if (.not. isvar("format_out"))then
2268
2269
2270	format_out = "x11"
2271
2272
2273	end if
2274	;***************************************************
2275	; OPTIONAL --file_out-- OUTPUT FILE
2276	;
2277	; path and name of the output file
2278	;
2279	; data type: string
2280	;
2281	; example: file_out = "/home/path_to_output/test_ts"
2282	;
2283	; default: "~/test_ts"
2284	;***************************************************
2285	if (.not. isvar("file_out"))then
2286
2287
2288	file_out = "~/test_ts"
2289
2290
2291	end if
2292	;***************************************************
2293	; OPTIONAL --var-- OUTPUT VARIABLES
2294	;
2295	; names of output variables;
2296	; inidcate them with one comma before and after each variable
2297	; if the name contains double quotes (") use dq and the '+' operation to
2298	; concatenate the strings
2299	;
2300	; data type: string
2301	;
2302	; example: var = ",umax,vmax,wmax,w"+dq+"pt"+dq+"0,"
2303	;
2304	; default: "all" (all available variables are plotted)
2305	;***************************************************
2306	if (.not. isvar("var"))then
2307
2308
2309	var = "all"
2310
2311
2312	end if
2313	;***************************************************
2314	; OPTIONAL --start_time_step-- FIRST TIME STEP
2315	;
2316	; first time step of plot; there is no need to specify a precise
2317	; time value from the input file,
2318	; 'start_time_step' is rounded to the next existent time step
2319	;
2320	; data type: double; dimension: [hour]
2321	;
2322	; example: start_time_step = 0.5d
2323	;
2324	; default: -1.d (first available time step)
2325	;***************************************************
2326	if (.not. isvar("start_time_step"))then
2327
2328
2329	start_time_step = -1.d
2330
2331
2332	end if
2333	;***************************************************
2334	; OPTIONAL --end_time_step-- LAST TIME STEP
2335	;
2336	; last time step of plot; there is no need to specify a precise
2337	; time value from the input file,
2338	; 'end_time_step' is rounded to the next existent time step
2339	;
2340	; data type: double; dimension: [hour]
2341	;
2342	; example: end_time_step = 2.0d
2343	;
2344	; default: -1.d (last available time step)
2345	;***************************************************
2346	if (.not. isvar("end_time_step"))then
2347
2348
2349	end_time_step = -1.d
2350
2351
2352	end if
2353	;***************************************************
2354	; OPTIONAL --over-- OVERLAYING
2355	;
2356	; predefined overlaying of standard variables are switched
2357	; on [=1] or off [=0];
2358	; this feature cannot be used with statistic regions
2359	;
2360	; data type: integer
2361	;
2362	; example: over = 0
2363	;
2364	; default: 0
2365	;***************************************************
2366	if (.not. isvar("over"))then
2367
2368
2369	over = 0
2370
2371
2372	end if
2373	;***************************************************
2374	; OPTIONAL --norm_t-- NORMALISING X-AXIS OF TIMESERIES PLOTS (T-AXIS)
2375	;
2376	; normalising the x-axis with the given value;
2377	; the unit can be set explicitly;
2378	; by default no normalising and unit is set to [s]
2379	;
2380	; data type: float
2381	;
2382	; example: norm_t = 3600.
2383	;
2384	; default: 1.
2385	;***************************************************
2386	if(.not. isvar("norm_t"))then
2387
2388
2389	norm_t = 1.
2390
2391
2392	end if
2393	;***************************************************
2394	; OPTIONAL --unit_t-- UNIT OF X-AXIS OF TIMESERIES PLOTS (T-AXIS)
2395	;
2396	; unit of the x-axis can be set; by default unit is set to [s]
2397	;
2398	; data type: string
2399	;
2400	; example: unit_t = "h"
2401	;
2402	; default: " "
2403	;***************************************************
2404	if(.not. isvar("unit_t"))then
2405
2406
2407	unit_t = " "
2408
2409
2410	end if
2411	;***************************************************
2412	; OPTIONAL --no_columns-- NUMBER OF COLUMNS
2413	;
2414	; number of plots in one row
2415	;
2416	; data type: integer
2417	;
2418	; example: no_columns = 1
2419	;
2420	; default: 1
2421	;***************************************************
2422	if (.not. isvar("no_columns"))then
2423
2424
2425	no_columns = 1
2426
2427
2428	end if
2429	;***************************************************
2430	; OPTIONAL --no_rows-- NUMBER OF ROWS
2431	;
2432	; number of plots in one column
2433	;
2434	; data type: integer
2435	;
2436	; example: no_rows = 2
2437	;
2438	; default: 2
2439	;***************************************************
2440	if (.not. isvar("no_rows"))then
2441
2442
2443	no_rows = 2
2444
2445
2446	end if
2447	;***************************************************
2448	; OPTIONAL --font_size-- FONT SIZE OF STRINGS
2449	;
2450	; font size can be changed to fit to the current plot
2451	;
2452	; data type: float
2453	;
2454	; example: font_size = 0.07
2455	;
2456	; default: 0.07
2457	;***************************************************
2458	if(.not. isvar("font_size"))then
2459
2460
2461	font_size = 0.07
2462
2463
2464	end if
2465	;***************************************************
2466
2467	end if
2468
2469	;*********************************************************
2470
2471	end

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format