Home

Context Navigation

.ncl.config.default @ 562

Last change on this file since 562 was 534, checked in by heinze, 15 years ago
Bugfix in spectra.ncl concerning output in png and small changes in layout
File size: 70.3 KB

Rev	Line
[418]	1	;*********************************************************
	2	; Copying .hluresfile in the home directory
	3	;*********************************************************
	4
	5	command = "ksh 'if [ ! -f $HOME/.hluresfile ]; then; "+\
	6	"cp $PALM_BIN/NCL/.hluresfile $HOME; fi'"
	7	system(command)
	8
	9	;*********************************************************
	10
	11
[190]	12	begin
	13
	14	;*********************************************************
[194]	15
	16	script=which_script
[526]	17
	18	;******************************************************
	19	; BE AWARE: NCl uses double quotes (") to denote strings
	20	; to retrieve the double quote character - use dq:
	21
	22	dq=str_get_dq()
	23
	24	;******************************************************
[190]	25
	26	;*********************************************************
[194]	27
[190]	28	;******************************************************
	29	; parameters used by CROSS_SECTIONS
	30	;******************************************************
	31
[194]	32	if (script .EQ. "cross_section")then
[190]	33
	34	;***************************************************
	35	; REQUIRED --file_1-- INPUT FILE
	36	;
[418]	37	; input file produced by PALM; if there is more than one file for
	38	; all timesteps
	39	; of a job chain,
	40	; declare path and file name without cycle number and ".nc" (first and
	41	; last cycle numbers are given with the parameters 'start_f' and
	42	; 'end_f');
[218]	43	; otherwise declare path and full file name
[190]	44	;
	45	; data type: string
	46	;
[418]	47	; example: file_1 = "/path_to_file/file_xy_av" if you use more than
	48	; one cycle number
	49	; file_1 = "/path_to_file/file_xy_av.4.nc" if you use one file
	50	; (e.g. with cycle number 4)
[218]	51	;
[190]	52	; default: "File in"
	53	;***************************************************
	54	if(.not. isvar("file_1"))then
[194]	55
	56
[267]	57	file_1 = "File in"
[190]	58
[194]	59
[190]	60	end if
	61	;***************************************************
[513]	62	; OPTIONAL/REQUIRED if more than one file of a job chain
[418]	63	; --start_f-- START OF CYCLIC NUMBER
[190]	64	;
[418]	65	; if there is more than one file for all timesteps of a job chain,
	66	; declare the first cyclicnumber which contains timesteps
	67	; you'd like to use
[218]	68	;
	69	; data type: integer
	70	;
[418]	71	; example: start_f = 3 (if first file: example_xy_av.3.nc) and
	72	; start_f = 0 (if first file: example_xy_av.nc)
[218]	73	;
	74	; default: -1
	75	;***************************************************
	76	if (.not. isvar("start_f"))then
	77
	78
	79	start_f = -1
	80
	81
	82	end if
	83	;***************************************************
[513]	84	; OPTIONAL/REQUIRED if more than one file of a job chain
	85	; --end_f-- END OF CYCLIC NUMBER
[218]	86	;
[513]	87	; if there is more than one file for all timesteps of a job chain,
	88	; declare the last cyclicnumber which contains timesteps you'd like
	89	; to use
[218]	90	;
	91	; data type: integer
	92	;
[418]	93	; example: end_f = 48 (if last file: example_xy_av.48.nc) and
	94	; end_f = 0 (if last file: example_xy_av.nc)
[218]	95	;
	96	; default: -1
	97	;***************************************************
	98	if (.not. isvar("end_f"))then
	99
	100
	101	end_f = -1
	102
	103
	104	end if
	105	;***************************************************
[513]	106	; OPTIONAL --xyc--xzc--yzc-- SELECTION of XY or XZ or YZ CROSS SECTIONS
[218]	107	;
[418]	108	; desired section has to be set to 1;
	109	; e.g.: xyc=1, xzc=0 and yzc=0 for xy-section
[190]	110	;
	111	; data type: integer
	112	;
[218]	113	; example: xyc = 1
	114	; xzc = 0
	115	; yzc = 0
	116	;
[190]	117	; default: 0
	118	;***************************************************
	119	if(.not. isvar("xyc"))then
	120
	121	xyc = 0
	122
	123	end if
	124	if (.not. isvar("xzc"))then
	125
	126	xzc = 0
	127
	128	end if
	129	if (.not. isvar("yzc"))then
	130
	131	yzc = 0
	132
	133	end if
	134	;***************************************************
	135	; OPTIONAL --format_out-- OUTPUT FORMAT
	136	;
[418]	137	; format of the output file;
[532]	138	; supported file formats: x11, pdf, ps, eps, epsi ncgm or png
[190]	139	;
	140	; data type: string
	141	;
[218]	142	; example: format_out = "pdf"
	143	;
[190]	144	; default: "x11"
	145	;***************************************************
	146	if(.not. isvar("format_out"))then
	147
	148
	149	format_out = "x11"
	150
	151
	152	end if
	153	;***************************************************
	154	; OPTIONAL --file_out-- OUTPUT FILE
	155	;
[218]	156	; path and name of the output file
[190]	157	;
	158	; data type: string
	159	;
[218]	160	; example: file_out = "/home/path_to_output/test_cs"
	161	;
[194]	162	; default: "~/test_cs"
[190]	163	;***************************************************
	164	if(.not. isvar("file_out"))then
	165
	166
	167	file_out = "~/test_cs"
	168
	169
	170	end if
	171	;***************************************************
[218]	172	; OPTIONAL --no_columns-- NUMBER OF COLUMNS
[190]	173	;
	174	; number of plots in one row
	175	;
	176	; data type: integer
[218]	177	;
	178	; example: no_columns = 1
[190]	179	;
	180	; default: 1
	181	;***************************************************
	182	if(.not. isvar("no_columns"))then
	183
	184
	185	no_columns = 1
	186
	187
	188	end if
	189	;***************************************************
[218]	190	; OPTIONAL --no_rows-- NUMBER OF ROWS
[190]	191	;
	192	; number of plots in one column
	193	;
	194	; data type: integer
[218]	195	;
	196	; example: no_rows = 2
[190]	197	;
	198	; default: 2
	199	;***************************************************
[218]	200	if(.not. isvar("no_rows"))then
[190]	201
	202
[218]	203	no_rows = 2
[190]	204
	205
	206	end if
	207	;***************************************************
	208	; OPTIONAL --sort-- TYPE OF SORTING
	209	;
[418]	210	; sequence of plots; sorting either by time step [="time"] or
	211	; by layer/height [="layer"]
[190]	212	;
	213	; data type: string
	214	;
[218]	215	; example: sort = "layer"
	216	;
[190]	217	; default: "layer"
	218	;***************************************************
	219	if(.not. isvar("sort"))then
	220
	221
	222	sort = "layer"
	223
	224
	225	end if
	226	;***************************************************
	227	; OPTIONAL --var-- OUTPUT VARIABLES
	228	;
[526]	229	; names of output variables;
	230	; inidcate them with one comma before and after each variable;
	231	; if the name contains double quotes (") use dq and the '+' operation to
	232	; concatenate the strings
[190]	233	;
	234	; data type: string
[218]	235	;
[342]	236	; example: var = ",u,v,w,"
[190]	237	;
[218]	238	; default: "all" (all available variables are plotted)
[190]	239	;***************************************************
	240	if(.not. isvar("var"))then
	241
	242
	243	var = "all"
	244
	245
	246	end if
	247	;***************************************************
	248	; OPTIONAL --start_time_step-- FIRST TIME STEP
	249	;
[418]	250	; first time step of plot; there is no need to specify a precise time
	251	; value from the input file,
[218]	252	; 'start_time_step' is rounded to the next existent time step
[190]	253	;
	254	; data type: double; dimension: [hour]
	255	;
[418]	256	; example: start_time_step = 0.5d
[218]	257	;
[190]	258	; default: -1.d (first available time step)
	259	;***************************************************
	260	if(.not. isvar("start_time_step"))then
	261
	262
	263	start_time_step = -1.d
	264
	265
	266	end if
	267	;***************************************************
	268	; OPTIONAL --end_time_step-- LAST TIME STEP
	269	;
[418]	270	; last time step of plot; there is no need to specify a precise time
	271	; value from the input file,
[218]	272	; 'end_time_step' is rounded to the next existent time step
[190]	273	;
	274	; data type: double; dimension: [hour]
	275	;
[418]	276	; example: end_time_step = 2.0d
[218]	277	;
[190]	278	; default: -1.d (last available time step)
	279	;***************************************************
	280	if(.not. isvar("end_time_step"))then
	281
	282
	283	end_time_step = -1.d
	284
	285
	286	end if
	287	;***************************************************
	288	; OPTIONAL --xs-- MINIMUM X-AXIS
	289	;
[513]	290	; value for minimum of x-axis, selectable if there are
	291	; NO preseted layers
[418]	292	; for x (as for XY or XZ 2D-DATA);
	293	; there is no need to specify a precise meter value from the input file,
	294	; it is rounded to the next existent value
[190]	295	;
	296	; data type: double; dimension: [meter]
	297	;
[418]	298	; example: xs = 150.0d
[218]	299	;
[190]	300	; default: -1.d (minimum of range)
	301	;***************************************************
	302	if(.not. isvar("xs"))then
	303
	304
	305	xs = -1.d
	306
	307
	308	end if
	309	;***************************************************
	310	; OPTIONAL --xe-- MAXIMUM X-AXIS
	311	;
[513]	312	; value for maximum of x-axis, selectable if there are
	313	; NO preseted layers
[418]	314	; for x (as for XY or XZ 2D-DATA);
	315	; there is no need to specify a precise meter value from the input file,
	316	; it is rounded to the next existent value
[190]	317	;
	318	; data type: double; dimension: [meter]
	319	;
[418]	320	; example: xe = 300.0d
[218]	321	;
[190]	322	; default: -1.d (maximum of range)
	323	;***************************************************
	324	if(.not. isvar("xe"))then
	325
	326
	327	xe = -1.d
	328
	329
	330	end if
	331	;***************************************************
	332	; OPTIONAL --ys-- MINIMUM Y-AXIS
	333	;
[513]	334	; value for minimum of y-axis, selectable if there are
	335	; NO preseted layers
[418]	336	; for y (as for XY or YZ 2D-DATA);
	337	; there is no need to specify a precise meter value from the input file,
	338	; it is rounded to the next existent value
[190]	339	;
	340	; data type: double; dimension: [meter]
	341	;
[418]	342	; example: ys = 150.0d
[218]	343	;
[190]	344	; default: -1.d (minimum of range)
	345	;***************************************************
	346	if(.not. isvar("ys"))then
	347
	348
	349	ys = -1.d
	350
	351
	352	end if
	353	;***************************************************
	354	; OPTIONAL --ye-- MAXIMUM Y-AXIS
	355	;
[418]	356	; value for maximum of y-axis, selectable if there are NO preseted layers
	357	; for y (as for XY or YZ 2D-DATA);
	358	; there is no need to specify a precise meter value from the input file,
	359	; it is rounded to the next existent value
[190]	360	;
	361	; data type: double; dimension: [meter]
	362	;
[418]	363	; example: ye = 300.0d
[218]	364	;
[190]	365	; default: -1.d (maximum of range)
	366	;***************************************************
	367	if(.not. isvar("ye"))then
	368
	369
	370	ye = -1.d
	371
	372
	373	end if
	374	;***************************************************
	375	; OPTIONAL --zs-- MINIMUM Z-AXIS
	376	;
[513]	377	; index for minimum of z-axis, selectable if there are
	378	; NO preseted layers
[418]	379	; for z (as for XZ or YZ 2D-DATA);
[513]	380	; you cannot specify a meter value from the input file due to
	381	; grid stretching
[190]	382	;
	383	; data type: integer
	384	;
[218]	385	; example: zs = 0
	386	;
[190]	387	; default: -1 (minimum of range)
	388	;***************************************************
	389	if(.not. isvar("zs"))then
	390
	391
	392	zs = -1
	393
	394
	395	end if
	396	;***************************************************
	397	; OPTIONAL --ze-- MAXIMUM Z-AXIS
	398	;
[513]	399	; index for maximum of z-axis, selectable if there are
	400	; NO preseted layers
[418]	401	; for z (as for XZ or YZ 2D-DATA);
[513]	402	; you cannot specify a meter value from the input file due to
	403	; grid stretching
[190]	404	;
	405	; data type: integer
	406	;
[218]	407	; example: ze = 15
	408	;
[190]	409	; default: -1 (maximum of range)
	410	;***************************************************
	411	if(.not. isvar("ze"))then
	412
	413
	414	ze = -1
	415
	416
	417	end if
	418	;***************************************************
	419	; OPTIONAL --mode-- TYPE OF PLOT
	420	;
[418]	421	; isoline plots [="Line"], contour plots [="Fill"] or both [="Both"]
	422	; can be choosen
[190]	423	;
	424	; data type: string
	425	;
[218]	426	; example: mode = "Fill"
	427	;
[190]	428	; default: "Fill"
	429	;***************************************************
	430	if(.not. isvar("mode"))then
	431
	432
	433	mode = "Fill"
	434
	435
	436	end if
	437	;***************************************************
	438	; OPTIONAL --fill_mode-- TYPE OF FILLING
	439	;
[418]	440	; area fill [="AreaFill"], raster fill [="RasterFill"] or
	441	; cell fill [="CellFill"] can be choosen
[190]	442	;
	443	; data type: string
	444	;
[218]	445	; example: fill_mode = "AreaFill"
	446	;
[517]	447	; default: "RasterFill"
[190]	448	;***************************************************
	449	if(.not. isvar("fill_mode"))then
	450
	451
[517]	452	fill_mode = "RasterFill"
[190]	453
	454
	455	end if
	456	;***************************************************
	457	; OPTIONAL --shape-- ASPECT RATIO
	458	;
[218]	459	; aspect ratio of axis is kept [=1] or not[=0]
[190]	460	;
	461	; data type: integer
	462	;
[218]	463	; example: shape = 1
	464	;
[190]	465	; default: 1
	466	;***************************************************
	467	if(.not. isvar("shape"))then
	468
	469
	470	shape = 1
	471
	472
[218]	473	end if
[190]	474	;***************************************************
[218]	475	; OPTIONAL --font_size-- FONT SIZE OF STRINGS
	476	;
	477	; font size can be changed to fit to the current plot
	478	;
	479	; data type: float
	480	;
	481	; example: font_size = 0.04
	482	;
	483	; default: 0.04
	484	;***************************************************
	485	if(.not. isvar("font_size"))then
	486
	487
	488	font_size = 0.04
	489
	490
	491	end if
	492	;***************************************************
	493	; OPTIONAL --font_size_legend-- FONT SIZE OF LEGEND STRINGS
	494	;
	495	; font size of the legend can be changed to fit to the current plot
	496	;
	497	; data type: float
	498	;
[517]	499	; example: font_size_legend = 0.04
[218]	500	;
[517]	501	; default: 0.04
[218]	502	;***************************************************
	503	if(.not. isvar("font_size_legend"))then
	504
	505
[517]	506	font_size_legend = 0.04
[218]	507
	508
	509	end if
	510	;***************************************************
[418]	511	; OPTIONAL --legend_label_stride-- REDUCTION OF THE NUMBER
	512	; OF LABELS IN THE LEGEND
[218]	513	;
[418]	514	; if legend_label_stride is set to 1 every label is shown;
	515	; if set to 2 every second, ...
[218]	516	;
	517	; data type: integer
	518	;
	519	; example: legend_label_stride = 2
	520	;
	521	; default: 2
	522	;***************************************************
	523	if(.not. isvar("legend_label_reduction"))then
	524
	525
	526	legend_label_stride = 2
	527
	528
	529	end if
	530	;***************************************************
[513]	531	; OPTIONAL --axes_explicit--
	532	; EXPLICIT SETTINGS OF X- AND Y-AXES ARE SWITCHED ON
[218]	533	;
[418]	534	; to use several parameters to set up the axes, 'axes_explicit'
	535	; must be switched on [=1]; if switched off [=0] units of axes are [m]
[218]	536	;
	537	; data type: integer
	538	;
	539	; example: axes_explicit = 0
	540	;
	541	; default: 0
	542	;***************************************************
	543	if(.not. isvar("axes_explicit"))then
	544
	545
	546	axes_explicit = 0
	547
	548
	549	end if
	550	;***************************************************
[418]	551	; OPTIONAL if axes_explicit = 1 --major_ticks_x--
	552	; NUMBER OF MAJOR TICK MARKS AT X-AXIS
[218]	553	;
[418]	554	; major_ticks_x can be set to any integer, best segmentation of x-axis
	555	; can be achieved, if
	556	; (number of gripdpoints in x-direction)/(major_ticks_x-1)=INTEGER,
	557	; e.g. 128/8 = 16 -> major_ticks_x should be set to 9
[218]	558	;
	559	; data type: integer
	560	;
	561	; example: major_ticks_x = 6
	562	;
	563	; default: 6
	564	;***************************************************
	565	if(.not. isvar("major_ticks_x"))then
	566
	567
	568	major_ticks_x = 6
	569
	570
	571	end if
	572	;***************************************************
[418]	573	; OPTIONAL if axes_explicit = 1 --major_ticks_y--
	574	; NUMBER OF MAJOR TICK MARKS AT Y-AXIS
[218]	575	;
[418]	576	; major_ticks_y can be set to any integer, best segmentation of y-axis
	577	; can be achieved, if
	578	; (number of gripdpoints in y-direction)/(major_ticks_y-1)=INTEGER,
	579	; e.g. 128/8 = 16 -> major_ticks_y should be set to 9
[218]	580	;
	581	; data type: integer
	582	;
	583	; example: major_ticks_y = 6
	584	;
	585	; default: 6
	586	;***************************************************
	587	if(.not. isvar("major_ticks_y"))then
	588
	589
	590	major_ticks_y = 6
	591
	592
	593	end if
	594	;***************************************************
[418]	595	; OPTIONAL if axes_explicit = 1 --norm_x--norm_y--norm_z--
	596	; NORMALISE X-, Y- and Z-AXES
[218]	597	;
[513]	598	; normalising the axes with the given value;
	599	; units can explicitly be set;
[418]	600	; by default no normalising is used and units are [meter]
[218]	601	;
	602	; data type: float
	603	;
[418]	604	; default: 1.0
[218]	605	;***************************************************
	606	if(.not. isvar("norm_x"))then
	607
[418]	608	norm_x = 1.0
[218]	609
	610	end if
	611	if(.not. isvar("norm_y"))then
	612
[418]	613	norm_y = 1.0
[218]	614
	615	end if
	616	if(.not. isvar("norm_z"))then
	617
[418]	618	norm_z = 1.0
[218]	619
	620	end if
	621	;***************************************************
[418]	622	; OPTIONAL if axes_explicit = 1 --unit_x--unit_y--unit_z--
	623	; UNITS OF X-, Y- and Z-AXES
[218]	624	;
[418]	625	; units of the axes can be set; by default no units are given,
	626	; if norm_x, norm_y or norm_z are unequal 1., otherwise units are [meter]
[218]	627	;
	628	; data type: string,
	629	;
	630	; example: unit_x = "m/s"
	631	;
	632	; default: " "
	633	;***************************************************
	634	if(.not. isvar("unit_x"))then
	635
	636	unit_x = " "
	637
	638	end if
	639	if(.not. isvar("unit_y"))then
	640
	641	unit_y = " "
	642
	643	end if
	644	if(.not. isvar("unit_z"))then
	645
	646	unit_z = " "
	647
	648	end if
	649	;***************************************************
[190]	650	; OPTIONAL --vector-- VECTOR PLOT
	651	;
[218]	652	; a vector plot for one defined vector is switched on [=1] or off [=0]
[190]	653	;
	654	; data type: integer
	655	;
[218]	656	; example: vector = 0
	657	;
[190]	658	; default: 0
	659	;***************************************************
	660	if(.not. isvar("vector"))then
	661
	662
	663	vector = 0
	664
	665
	666	end if
	667	;***************************************************
	668	; REQUIRED IF vector=1 --vec1, vec2-- VECTOR FOR VECTOR PLOT
	669	;
[418]	670	; variables for the vector, vec1 hast to be set to component 1 and
	671	; vec2 to component 2;
[218]	672	; inidcate them with one comma before and after each variable;
[190]	673	;
	674	; data type: string
	675	;
[218]	676	; example: vec1=",u,"
	677	; vec2=",v,"
	678	;
[190]	679	; default: vec1 = "component1", vec2 = "component2"
	680	;***************************************************
	681	if(.not. isvar("vec1"))then
	682
	683	vec1 = "component1"
	684
	685	end if
	686	if (.not. isvar("vec2"))then
	687
	688	vec2 = "component2"
	689
	690	end if
	691	;***************************************************
	692	; OPTIONAL --plotvec-- VARIABLE FOR EXTRA VECTOR PLOT
	693	;
[418]	694	; the vector plot can be combined with other plots of variables;
	695	; if this is desired inidcate the variables,
	696	; where a vector plot shall overlay; inidcate them with one comma
	697	; before and after each variable
[190]	698	;
	699	; data type: string
	700	;
[218]	701	; example: plotvec = ",u,w,"
	702	;
[513]	703	; default: "plotvec" (no combining,
	704	; the vector plot is created seperately)
[190]	705	;***************************************************
	706	if(.not. isvar("plotvec"))then
	707
	708
	709	plotvec = "plotvec"
	710
	711
	712	end if
	713	;***************************************************
	714	; OPTIONAL --ref_mag-- REFERENCE VECTOR
	715	;
	716	; length of the reference vector in a vector plot
	717	;
	718	; data type: float
	719	;
[218]	720	; example: ref_mag = 0.05
	721	;
[190]	722	; default: 0.05
	723	;***************************************************
	724	if(.not. isvar("ref_mag"))then
	725
	726
	727	ref_mag = 0.05
	728
	729
	730	end if
	731	;***************************************************
[194]	732
[190]	733	end if
	734
	735	;******************************************************
	736	; parameters used by PROFILES
	737	;******************************************************
	738
[194]	739	if (script .EQ. "profiles")then
	740
[190]	741	;***************************************************
[218]	742	; REQUIRED --file_1-- 1ST INPUT FILE
[190]	743	;
[418]	744	; 1st input file produced by PALM; if there is more than one file for
	745	; all timesteps of a job chain, declare path and file name without
	746	; cycle number and ".nc" (first and last cycle numbers are given with
	747	; the parameters 'start_f' and 'end_f');
[218]	748	; otherwise declare path and full file name
[190]	749	;
	750	; data type: string
	751	;
[418]	752	; example: file_1 = "/path_to_file/file_pr"
	753	; if you use more than one cycle number
	754	; file_1 = "/path_to_file/file_pr.4.nc"
	755	; if you use one file (e.g. with cycle number 4)
[218]	756	;
[190]	757	; default: "File in"
	758	;***************************************************
[218]	759	if(.not. isvar("file_1"))then
	760
	761
[267]	762	file_1 = "File in"
[218]	763
	764
	765	end if
	766	;***************************************************
[513]	767	; OPTIONAL/REQUIRED --start_f_1-- if more than one file of a job chain
	768	; START OF CYCLIC NUMBER OF THE 1ST INPUT FILE
[218]	769	;
[418]	770	; if there is more than one file for all timesteps of a job chain,
[513]	771	; declare the first cyclicnumber which contains timesteps
	772	; you'd like to use
[218]	773	;
	774	; data type: integer
	775	;
[418]	776	; example: 3 (if first file: example_pr.3.nc) and
	777	; 0 (if first file: example_pr.nc)
[218]	778	;
	779	; default: -1
	780	;***************************************************
	781	if (.not. isvar("start_f_1"))then
[190]	782
[218]	783
	784	start_f_1 = -1
	785
	786
	787	end if
	788	;***************************************************
[513]	789	; OPTIONAL/REQUIRED --end_f_1-- if more than one file of a job chain
	790	; END OF CYCLIC NUMBER OF THE 1ST INPUT FILE
[218]	791	;
[418]	792	; if there is more than one file for all timesteps of a job chain,
[513]	793	; declare the last cyclicnumber which contains timesteps
	794	; you'd like to use
[218]	795	;
	796	; data type: integer
	797	;
[418]	798	; example: 48 (if last file: example_pr.48.nc) and
	799	; 0 (if last file: example_pr.nc)
[218]	800	;
	801	; default: -1
	802	;***************************************************
	803	if (.not. isvar("end_f_1"))then
[190]	804
[218]	805
[236]	806	end_f_1 = -1
[190]	807
	808
	809	end if
	810	;***************************************************
	811	; OPTIONAL --format_out-- OUTPUT FORMAT
	812	;
[532]	813	; supported file formats: x11, pdf, ps, eps, epsi, ncgm or png
[190]	814	;
	815	; data type: string
	816	;
	817	; default: "x11"
	818	;***************************************************
	819	if (.not. isvar("format_out"))then
	820
	821
	822	format_out = "x11"
	823
	824
	825	end if
	826	;***************************************************
	827	; OPTIONAL --file_out-- OUTPUT FILE
	828	;
[218]	829	; declare path and name of the output file
[190]	830	;
	831	; data type: string
	832	;
[194]	833	; default: "~/test_pr"
[190]	834	;***************************************************
	835	if (.not. isvar("file_out"))then
	836
	837
	838	file_out = "~/test_pr"
	839
	840
	841	end if
	842	;***************************************************
[218]	843	; OPTIONAL --no_columns-- NUMBER OF COLUMNS
[190]	844	;
	845	; number of plots in one row
	846	;
	847	; data type: integer
	848	;
	849	; default: 1
	850	;***************************************************
	851	if (.not. isvar("no_columns"))then
	852
	853
	854	no_columns = 1
	855
	856
	857	end if
	858	;***************************************************
[218]	859	; OPTIONAL --no_rows-- NUMBER OF ROWS
[190]	860	;
	861	; number of plots in one column
	862	;
	863	; data type: integer
	864	;
	865	; default: 2
	866	;***************************************************
[218]	867	if (.not. isvar("no_rows"))then
[190]	868
	869
[218]	870	no_rows = 2
[190]	871
	872
	873	end if
	874	;***************************************************
	875	; OPTIONAL --var-- OUTPUT VARIABLES
	876	;
[418]	877	; names of output variables;
	878	; inidcate them with one comma before and after each variable
[526]	879	; if the name contains double quotes (") use dq and the '+' operation to
	880	; concatenate the strings
[190]	881	;
	882	; data type: string
[218]	883	;
[526]	884	; example: var = ",u,v,w,wpt,w"+dq+"pt"+dq+",wpt,"
[190]	885	;
[218]	886	; default: "all" (all available variables are plotted)
[190]	887	;***************************************************
	888	if (.not. isvar("var"))then
	889
	890
	891	var = "all"
	892
	893
[219]	894	end if
	895	;***************************************************
	896	; OPTIONAL --legend-- SWITCHES ON A LEGEND
	897	;
	898	; a legend is switched on [=1] or off [=0]
	899	;
	900	; data type: integer
	901	;
	902	; example: legend = 1
	903	;
	904	; default: 1
	905	;***************************************************
	906	if (.not. isvar("legend"))then
	907
	908
[236]	909	legend = 1
[219]	910
	911
[190]	912	end if
	913	;***************************************************
	914	; OPTIONAL ---no_files-- NUMBER OF INPUT FILES
	915	;
[418]	916	; up to 6 input files of different runs can be used; all input files
	917	; must contain the same variables and dimensionalties;
[218]	918	; identical variables are merged in one plot;
[190]	919	; combining or overlaying of any variables is not feasible;
[418]	920	; an extra legend (besides the time step legend) is drawn where you
	921	; can explicitily name the items
[190]	922	;
	923	; data type: integer
	924	;
	925	; default: 1
	926	;***************************************************
	927	if (.not. isvar("no_files"))then
	928
	929
	930	no_files = 1
	931
	932
	933	end if
	934	;***************************************************
	935	; OPTIONAL --name_legend_1-- 1st LEGEND ITEM
	936	;
	937	; if no_files > 1: name of 1st item in extra legend
	938	;
	939	; data type: string
	940	;
	941	; default: "File 1"
	942	;***************************************************
	943	if (.not. isvar("name_legend_1"))then
	944
	945
	946	name_legend_1 = "File 1"
	947
	948
[218]	949	end if
[190]	950	;***************************************************
[218]	951	; REQUIRED if no_files > 1 --file_2-- 2ND INPUT FILE
[190]	952	;
[418]	953	; 2nd input file produced by PALM; if there is more than one file
	954	; for all timesteps of a job chain,
	955	; declare path and file name without cycle number and ".nc" (first and
[513]	956	; last cycle numbers are given with the parameters
	957	; 'start_f' and 'end_f');
[218]	958	; otherwise declare path and full file name
[190]	959	;
	960	; data type: string
	961	;
[418]	962	; example: file_2 = "/path_to_file/file_pr"
	963	; if you use more than one cycle number
	964	; file_2 = "/path_to_file/file_pr.4.nc"
	965	; if you use one file (e.g. with cycle number 4)
[218]	966	;
[190]	967	; default: "File in"
	968	;***************************************************
[218]	969	if(.not. isvar("file_2"))then
	970
	971
	972	file_2 = "File in"
	973
	974
	975	end if
	976	;***************************************************
[513]	977	; OPTIONAL/REQUIRED --start_f_2-- if more than one file of a job chain
	978	; START OF CYCLIC NUMBER OF THE 2ND INPUT FILE
[218]	979	;
[418]	980	; if there is more than one file for all timesteps of a job chain,
[513]	981	; declare the first cyclicnumber which contains timesteps
	982	; you'd like to use
[218]	983	;
	984	; data type: integer
	985	;
	986	; example: 3 (if first file: example_ts.3.nc)
	987	;
	988	; default: -1
	989	;***************************************************
	990	if (.not. isvar("start_f_2"))then
[190]	991
	992
[218]	993	start_f_2 = -1
[190]	994
	995
[218]	996	end if
[190]	997	;***************************************************
[513]	998	; REQUIRED --end_f_2-- if more than one file of a job chain
	999	; END OF CYCLIC NUMBER OF THE 2ND INPUT FILE
[218]	1000	;
[418]	1001	; if there is more than one file for all timesteps of a job chain,
[513]	1002	; declare the last cyclicnumber which contains timesteps
	1003	; you'd like to use
[218]	1004	;
	1005	; data type: integer
	1006	;
	1007	; example: 48 (if last file: example_ts.48.nc)
	1008	;
	1009	; default: -1
	1010	;***************************************************
	1011	if (.not. isvar("end_f_2"))then
	1012
	1013
	1014	end_f_2 = -1
	1015
	1016
	1017	end if
	1018	;***************************************************
[190]	1019	; OPTIONAL --name_legend_2-- 2nd LEGEND ITEM
	1020	;
	1021	; if no_files > 1: name of 2nd item in extra legend
	1022	;
	1023	; data type: string
	1024	;
	1025	; default: "File 2"
	1026	;***************************************************
	1027	if (.not. isvar("name_legend_2"))then
	1028
	1029
	1030	name_legend_2 = "File 2"
	1031
	1032
[218]	1033	end if
[190]	1034	;***************************************************
[218]	1035	; REQUIRED if no_files > 2 --file_3-- 3RD INPUT FILE
[190]	1036	;
[418]	1037	; 3rd input file produced by PALM; if there is more than one file
	1038	; for all timesteps of a job chain,
	1039	; declare path and file name without cycle number and ".nc" (first and
[513]	1040	; last cycle numbers are given with the parameters
	1041	; 'start_f' and 'end_f');
[218]	1042	; otherwise declare path and full file name
[190]	1043	;
	1044	; data type: string
	1045	;
[418]	1046	; example: file_3 = "/path_to_file/file_pr"
	1047	; if you use more than one cycle number
	1048	; file_3 = "/path_to_file/file_pr.4.nc"
	1049	; if you use one file (e.g. with cycle number 4)
[218]	1050	;
[190]	1051	; default: "File in"
	1052	;***************************************************
[218]	1053	if(.not. isvar("file_3"))then
	1054
	1055
	1056	file_3 = "File in"
[190]	1057
	1058
[218]	1059	end if
[190]	1060	;***************************************************
[513]	1061	; OPTIONAL/REQUIRED --start_f_3-- if more than one file of a job chain
	1062	; START OF CYCLIC NUMBER OF THE 3RD INPUT FILE
[190]	1063	;
[418]	1064	; if there is more than one file for all timesteps of a job chain,
[513]	1065	; declare the first cyclicnumber which contains timesteps
	1066	; you'd like to use
[190]	1067	;
[218]	1068	; data type: integer
[190]	1069	;
[218]	1070	; example: 3 (if first file: example_ts.3.nc)
	1071	;
	1072	; default: -1
[190]	1073	;***************************************************
[218]	1074	if (.not. isvar("start_f_3"))then
[190]	1075
[218]	1076
	1077	start_f_3 = -1
[190]	1078
	1079
[218]	1080	end if
[190]	1081	;***************************************************
[513]	1082	; OPTIONAL/REQUIRED --end_f_3-- if more than one file of a job chain
	1083	; END OF CYCLIC NUMBER OF THE 3RD INPUT FILE
[190]	1084	;
[513]	1085	; if there is more than one file for all timesteps of a job chain,
	1086	; declare
[418]	1087	; the last cyclicnumber which contains timesteps you'd like to use
[190]	1088	;
[218]	1089	; data type: integer
[190]	1090	;
[218]	1091	; example: 48 (if last file: example_ts.48.nc)
	1092	;
	1093	; default: -1
[190]	1094	;***************************************************
[218]	1095	if (.not. isvar("end_f_3"))then
[190]	1096
[218]	1097
	1098	end_f_3 = -1
[190]	1099
	1100
[218]	1101	end if
[190]	1102	;***************************************************
[218]	1103	; OPTIONAL --name_legend_3-- 3rd LEGEND ITEM
[190]	1104	;
[218]	1105	; if no_files > 2: name of 3rd item in extra legend
[190]	1106	;
	1107	; data type: string
	1108	;
[218]	1109	; default: "File 3"
[190]	1110	;***************************************************
[218]	1111	if (.not. isvar("name_legend_3"))then
[190]	1112
[218]	1113
	1114	name_legend_3 = "File 3"
[190]	1115
	1116
[218]	1117	end if
[190]	1118	;***************************************************
[218]	1119	; REQUIRED if no_files > 3 --file_4-- 4TH INPUT FILE
[190]	1120	;
[418]	1121	; 4th input file produced by PALM; if there is more than one file for
	1122	; all timesteps of a job chain,
	1123	; declare path and file name without cycle number and ".nc" (first and
[513]	1124	; last cycle numbers are given with the parameters
	1125	; 'start_f' and 'end_f');
[218]	1126	; otherwise declare path and full file name
[190]	1127	;
	1128	; data type: string
	1129	;
[418]	1130	; example: file_4 = "/path_to_file/file_pr"
	1131	; if you use more than one cycle number
	1132	; file_4 = "/path_to_file/file_pr.4.nc"
	1133	; if you use one file (e.g. with cycle number 4)
[218]	1134	;
[190]	1135	; default: "File in"
	1136	;***************************************************
[218]	1137	if(.not. isvar("file_4"))then
	1138
	1139
	1140	file_4 = "File in"
[190]	1141
	1142
[218]	1143	end if
[190]	1144	;***************************************************
[513]	1145	; OPTIONAL/REQUIRED --start_f_4-- if more than one file of a job chain
	1146	; START OF CYCLIC NUMBER OF THE 4TH INPUT FILE
[190]	1147	;
[418]	1148	; if there is more than one file for all timesteps of a job chain,
[513]	1149	; declare the first cyclicnumber which contains timesteps
	1150	; you'd like to use
[190]	1151	;
[218]	1152	; data type: integer
[190]	1153	;
[218]	1154	; example: 3 (if first file: example_ts.3.nc)
	1155	;
	1156	; default: -1
[190]	1157	;***************************************************
[218]	1158	if (.not. isvar("start_f_4"))then
[190]	1159
[218]	1160
	1161	start_f_4 = -1
[190]	1162
	1163
[218]	1164	end if
[190]	1165	;***************************************************
[513]	1166	; OPTIONAL/REQUIRED --end_f_4-- if more than one file of a job chain
	1167	; END OF CYCLIC NUMBER OF THE 4TH INPUT FILE
[190]	1168	;
[418]	1169	; if there is more than one file for all timesteps of a job chain,
[513]	1170	; declare the last cyclicnumber which contains timesteps
	1171	; you'd like to use
[190]	1172	;
[218]	1173	; data type: integer
[190]	1174	;
[218]	1175	; example: 48 (if last file: example_ts.48.nc)
	1176	;
	1177	; default: -1
[190]	1178	;***************************************************
[218]	1179	if (.not. isvar("end_f_4"))then
[190]	1180
[218]	1181
	1182	end_f_4 = -1
[190]	1183
	1184
[218]	1185	end if
[190]	1186	;***************************************************
[218]	1187	; OPTIONAL --name_legend_4-- 4th LEGEND ITEM
[190]	1188	;
[218]	1189	; if no_files > 3: name of 4th item in extra legend
[190]	1190	;
	1191	; data type: string
	1192	;
[218]	1193	; default: "File 4"
[190]	1194	;***************************************************
[218]	1195	if (.not. isvar("name_legend_4"))then
[190]	1196
[218]	1197
	1198	name_legend_4 = "File 4"
[190]	1199
	1200
[218]	1201	end if
[190]	1202	;***************************************************
[218]	1203	; REQUIRED if no_files > 4 --file_5-- 5TH INPUT FILE
[190]	1204	;
[418]	1205	; 5th input file produced by PALM; if there is more than one file for
	1206	; all timesteps of a job chain,
	1207	; declare path and file name without cycle number and ".nc" (first and
[513]	1208	; last cycle numbers are given with the parameters
	1209	; 'start_f' and 'end_f');
[218]	1210	; otherwise declare path and full file name
[190]	1211	;
	1212	; data type: string
	1213	;
[418]	1214	; example: file_5 = "/path_to_file/file_pr"
	1215	; if you use more than one cycle number
	1216	; file_5 = "/path_to_file/file_pr.4.nc"
	1217	; if you use one file (e.g. with cycle number 4)
[218]	1218	;
[190]	1219	; default: "File in"
	1220	;***************************************************
[218]	1221	if(.not. isvar("file_5"))then
	1222
	1223
	1224	file_5 = "File in"
[190]	1225
	1226
[218]	1227	end if
[190]	1228	;***************************************************
[513]	1229	; OPTIONAL/REQUIRED --start_f_5-- if more than one file of a job chain
	1230	; START OF CYCLIC NUMBER OF THE 5TH INPUT FILE
[190]	1231	;
[418]	1232	; if there is more than one file for all timesteps of a job chain,
[513]	1233	; declare the first cyclicnumber which contains timesteps
	1234	; you'd like to use
[190]	1235	;
[218]	1236	; data type: integer
[190]	1237	;
[218]	1238	; example: 3 (if first file: example_ts.3.nc)
	1239	;
	1240	; default: -1
[190]	1241	;***************************************************
[218]	1242	if (.not. isvar("start_f_5"))then
[190]	1243
[218]	1244
	1245	start_f_5 = -1
[190]	1246
	1247
[218]	1248	end if
[190]	1249	;***************************************************
[513]	1250	; OPTIONAL/REQUIRED --end_f_5-- if more than one file of a job chain
	1251	;END OF CYCLIC NUMBER OF THE 5TH INPUT FILE
[190]	1252	;
[418]	1253	; if there is more than one file for all timesteps of a job chain,
[513]	1254	; declare the last cyclicnumber which contains timesteps
	1255	; you'd like to use
[190]	1256	;
[218]	1257	; data type: integer
[190]	1258	;
[218]	1259	; example: 48 (if last file: example_ts.48.nc)
	1260	;
	1261	; default: -1
[190]	1262	;***************************************************
[218]	1263	if (.not. isvar("end_f_5"))then
[190]	1264
[218]	1265
	1266	end_f_5 = -1
[190]	1267
	1268
[218]	1269	end if
[190]	1270	;***************************************************
[218]	1271	; OPTIONAL --name_legend_5-- 5th LEGEND ITEM
[190]	1272	;
[218]	1273	; if no_files > 4: name of 5th item in extra legend
[190]	1274	;
	1275	; data type: string
	1276	;
[218]	1277	; default: "File 5"
[190]	1278	;***************************************************
[218]	1279	if (.not. isvar("name_legend_5"))then
[190]	1280
[218]	1281
	1282	name_legend_5 = "File 5"
[190]	1283
	1284
[218]	1285	end if
[190]	1286	;***************************************************
[218]	1287	; REQUIRED if no_files > 5 --file_6-- 6TH INPUT FILE
[190]	1288	;
[418]	1289	; 6th input file produced by PALM; if there is more than one file for
	1290	; all timesteps of a job chain,
	1291	; declare path and file name without cycle number and ".nc" (first and
[513]	1292	; last cycle numbers are given with the parameters
	1293	; 'start_f' and 'end_f');
[218]	1294	; otherwise declare path and full file name
[190]	1295	;
	1296	; data type: string
	1297	;
[418]	1298	; example: file_6 = "/path_to_file/file_pr"
	1299	; if you use more than one cycle number
	1300	; file_6 = "/path_to_file/file_pr.4.nc"
	1301	; if you use one file (e.g. with cycle number 4)
[218]	1302	;
[190]	1303	; default: "File in"
	1304	;***************************************************
[218]	1305	if(.not. isvar("file_6"))then
	1306
	1307
	1308	file_6 = "File in"
[190]	1309
	1310
[218]	1311	end if
[190]	1312	;***************************************************
[513]	1313	; OPTIONAL/REQUIRED --start_f_6-- if more than one file of a job chain
	1314	; START OF CYCLIC NUMBER OF THE 6TH INPUT FILE
[190]	1315	;
[418]	1316	; if there is more than one file for all timesteps of a job chain,
[513]	1317	; declare the first cyclicnumber which contains timesteps
	1318	; you'd like to use
[190]	1319	;
[218]	1320	; data type: integer
[190]	1321	;
[218]	1322	; example: 3 (if first file: example_ts.3.nc)
	1323	;
	1324	; default: -1
[190]	1325	;***************************************************
[218]	1326	if (.not. isvar("start_f_6"))then
[190]	1327
[218]	1328
	1329	start_f_6 = -1
[190]	1330
	1331
[218]	1332	end if
[190]	1333	;***************************************************
[513]	1334	; OPTIONAL/REQUIRED --end_f_6-- if more than one file of a job chain
	1335	; END OF CYCLIC NUMBER OF THE 6TH INPUT FILE
[190]	1336	;
[418]	1337	; if there is more than one file for all timesteps of a job chain,
[513]	1338	; declare the last cyclicnumber which contains timesteps
	1339	; you'd like to use
[190]	1340	;
[218]	1341	; data type: integer
[190]	1342	;
[218]	1343	; example: 48 (if last file: example_ts.48.nc)
	1344	;
	1345	; default: -1
[190]	1346	;***************************************************
[218]	1347	if (.not. isvar("end_f_6"))then
[190]	1348
[218]	1349
	1350	end_f_6 = -1
[190]	1351
	1352
[218]	1353	end if
[190]	1354	;***************************************************
[218]	1355	; OPTIONAL --name_legend_6-- 6TH LEGEND ITEM
[190]	1356	;
[218]	1357	; if no_files > 5: name of 6th item in extra legend
[190]	1358	;
	1359	; data type: string
	1360	;
[218]	1361	; default: "File 6"
[190]	1362	;***************************************************
[218]	1363	if (.not. isvar("name_legend_6"))then
[190]	1364
[218]	1365
	1366	name_legend_6 = "File 6"
[190]	1367
	1368
[218]	1369	end if
[190]	1370	;***************************************************
[218]	1371	; OPTIONAL --start_time_step-- FIRST TIME STEP
[190]	1372	;
[418]	1373	; first time step of plot; there is no need to specify a precise
	1374	; time value from the input file,
[218]	1375	; 'start_time_step' is rounded to the next existent time step
[190]	1376	;
[218]	1377	; data type: double; dimension: [hour]
[190]	1378	;
[418]	1379	; example: start_time_step = 0.5d
[218]	1380	;
	1381	; default: -1.d (first available time step)
[190]	1382	;***************************************************
[218]	1383	if (.not. isvar("start_time_step"))then
[190]	1384
[218]	1385
	1386	start_time_step = -1.d
[190]	1387
	1388
	1389	end if
	1390	;***************************************************
[218]	1391	; OPTIONAL --end_time_step-- LAST TIME STEP
[190]	1392	;
[418]	1393	; last time step of plot; there is no need to specify a precise
	1394	; time value from the input file,
[218]	1395	; 'end_time_step' is rounded to the next existent time step
[190]	1396	;
[218]	1397	; data type: double; dimension: [hour]
[190]	1398	;
[418]	1399	; example: end_time_step = 2.0d
[218]	1400	;
	1401	; default: -1.d (last available time step)
[190]	1402	;***************************************************
[218]	1403	if (.not. isvar("end_time_step"))then
[190]	1404
[218]	1405
[267]	1406	end_time_step = -1.d
[190]	1407
	1408
[218]	1409	end if
[190]	1410	;***************************************************
[351]	1411	; OPTIONAL --time_stride-- TEMPORAL STRIDE
	1412	;
[418]	1413	; temporal stride for the plots; if time_stride=1 all the profiles
	1414	; between first_time_step and end_time_step are plotted
	1415	; (including first_time_step and end_time_step),
	1416	; if time_stride=3 every third time step between start_time_step and
	1417	; end_time_step is plotted
[351]	1418	;
	1419	; data type: integer
	1420	;
	1421	; example: time_stride = 3
	1422	;
	1423	; default: 1
	1424	;***************************************************
	1425	if (.not. isvar("time_stride"))then
	1426
	1427
	1428	time_stride = 1
	1429
	1430
	1431	end if
	1432	;***************************************************
[218]	1433	; OPTIONAL --start_x-- STARTVALUE IN X-DIRECTION
[190]	1434	;
[418]	1435	; if 3D data is used for profiles you can choose a startvalue
	1436	; in x-direction for horizontal averaging
[190]	1437	;
[218]	1438	; data type: integer; dimension [grippoint]
[190]	1439	;
[218]	1440	; example: start_x = 0
	1441	;
	1442	; default: 0 (minimum of range)
[190]	1443	;***************************************************
[218]	1444	if (.not. isvar("start_x"))then
[190]	1445
[218]	1446
	1447	start_x = 0
[190]	1448
	1449
[218]	1450	end if
[190]	1451	;***************************************************
[218]	1452	; OPTIONAL --end_x-- ENDVALUE IN X-DIRECTION
[190]	1453	;
[418]	1454	; if 3D data is used for profiles you can choose an endvalue
	1455	; in x-direction for horizontal averaging
[190]	1456	;
[218]	1457	; data type: integer; dimension [grippoint]
[190]	1458	;
[218]	1459	; example: end_x = 200
	1460	;
	1461	; default: -1 (maximum of range excluding ghostpoint)
[190]	1462	;***************************************************
[218]	1463	if (.not. isvar("end_x"))then
[190]	1464
[218]	1465
	1466	end_x = -1
[190]	1467
	1468
[218]	1469	end if
[190]	1470	;***************************************************
[218]	1471	; OPTIONAL --start_y-- STARTVALUE IN Y-DIRECTION
[190]	1472	;
[418]	1473	; if 3D data is used for profiles you can choose a startvalue
	1474	; in y-direction for horizontal averaging
[190]	1475	;
[218]	1476	; data type: integer; dimension [grippoint]
[190]	1477	;
[218]	1478	; example: start_y = 0
	1479	;
	1480	; default: 0 (minimum of range)
[190]	1481	;***************************************************
[218]	1482	if (.not. isvar("start_y"))then
[190]	1483
[218]	1484
	1485	start_y = 0
[190]	1486
	1487
[218]	1488	end if
[190]	1489	;***************************************************
[218]	1490	; OPTIONAL --end_y-- ENDVALUE IN Y-DIRECTION
[190]	1491	;
[418]	1492	; if 3D data is used for profiles you can choose an endvalue
	1493	; in y-direction for horizontal averaging
[190]	1494	;
[218]	1495	; data type: integer; dimension [grippoint]
[190]	1496	;
[218]	1497	; example: end_y = 200
	1498	;
	1499	; default: -1 (maximum of range excluding ghostpoint)
[190]	1500	;***************************************************
[218]	1501	if (.not. isvar("end_y"))then
[190]	1502
[218]	1503
	1504	end_y = -1
[190]	1505
	1506
[218]	1507	end if
[190]	1508	;***************************************************
	1509	; OPTIONAL --xs-- MINIMUM X-AXIS
	1510	;
	1511	; value for minimum of x-axis
	1512	;
	1513	; data type: float; dimension of variable
	1514	;
[218]	1515	; example: xs = 300. (e.g. if var=",pt")
	1516	;
[190]	1517	; default: -1. (minimum of range)
	1518	;***************************************************
	1519	if (.not. isvar("xs"))then
	1520
	1521
	1522	xs = -1.
	1523
	1524
	1525	end if
	1526	;***************************************************
	1527	; OPTIONAL --xe-- MAXIMUM X-AXIS
	1528	;
	1529	; value for maximum of x-axis
	1530	;
	1531	; data type: float; dimension of variable
	1532	;
[218]	1533	; example: xe = 302. (e.g. if var=",pt")
	1534	;
[190]	1535	; default: -1. (maximum of range)
	1536	;***************************************************
	1537	if (.not. isvar("xe"))then
	1538
	1539
	1540	xe = -1.
	1541
	1542
	1543	end if
	1544	;***************************************************
	1545	; OPTIONAL --min_z-- MINIMUM Z-AXIS
	1546	;
	1547	; value for minimum height of z-axis
	1548	;
	1549	; data type: double; dimension: [meter]
	1550	;
[418]	1551	; example: min_z = 0.0d
[218]	1552	;
[190]	1553	; default: -1.d (related to the minimum of z-axis in input file)
	1554	;***************************************************
	1555	if (.not. isvar("min_z"))then
	1556
	1557
	1558	min_z = -1.d
	1559
	1560
	1561	end if
	1562	;***************************************************
	1563	; OPTIONAL --max_z-- MAXIMUM Z-AXIS
	1564	;
	1565	; value for maximum height of z-axis
	1566	;
	1567	; data type: double; dimension: [meter]
	1568	;
[418]	1569	; example: max_z = 1000.0d
[218]	1570	;
[190]	1571	; default: -1.d (related to the maximum of z-axis in input file)
	1572	;***************************************************
	1573	if (.not. isvar("max_z"))then
	1574
	1575
	1576	max_z = -1.d
	1577
	1578
	1579	end if
	1580	;***************************************************
[218]	1581	; OPTIONAL --log_z-- LOGARITHMIC SCALE OF Z-AXIS
[190]	1582	;
[218]	1583	; logarithmic scale for z-axis is switched on [=1] or off [=0]
[190]	1584	;
	1585	; data type: integer
	1586	;
[218]	1587	; example: log_z = 0
	1588	;
[190]	1589	; default: 0
	1590	;***************************************************
[218]	1591	if (.not. isvar("log_z"))then
[190]	1592
	1593
[218]	1594	log_z = 0
[190]	1595
	1596
	1597	end if
	1598	;***************************************************
[218]	1599	; OPTIONAL --norm_z-- NORMALISING Z-AXIS
[190]	1600	;
[218]	1601	; value for normalising the z-axis
[190]	1602	;
	1603	; data type: float
	1604	;
[218]	1605	; example: norm_z = 1.
	1606	;
	1607	; default: 1. (no normalising)
[190]	1608	;***************************************************
[218]	1609	if (.not. isvar("norm_z"))then
[190]	1610
	1611
[218]	1612	norm_z = 1.
[190]	1613
	1614
	1615	end if
	1616	;***************************************************
	1617	; OPTIONAL --over-- OVERLAYING
	1618	;
[513]	1619	; predefined overlaying of standard variables is switched
	1620	; on [=1] or off [=0];
[190]	1621	; this feature cannot be used with statistic regions
	1622	;
	1623	; data type: integer
	1624	;
[218]	1625	; example: over = 0
	1626	;
[190]	1627	; default: 0
	1628	;***************************************************
	1629	if (.not. isvar("over"))then
	1630
	1631
	1632	over = 0
	1633
	1634
	1635	end if
	1636	;***************************************************
	1637	; OPTIONAL --combine-- COMBINING
	1638	;
[418]	1639	; combining of two or three individual variables is possible and
	1640	; switched on [=1] or off[=0]
[190]	1641	;
	1642	; data type: integer
	1643	;
[218]	1644	; example: combine = 0
	1645	;
[190]	1646	; default: 0
	1647	;***************************************************
	1648	if (.not. isvar("combine"))then
	1649
	1650
	1651	combine = 0
	1652
	1653
	1654	end if
	1655	;***************************************************
	1656	; REQUIRED IF combine=1 --number_comb-- NUMBER FOR COMBINING
	1657	;
	1658	; number of variables for combining; 2 or 3 is valid
	1659	;
	1660	; data type: integer
	1661	;
[218]	1662	; example: number_comb = 2
	1663	;
[190]	1664	; default: -1
	1665	;***************************************************
	1666	if (.not. isvar("number_comb"))then
	1667
	1668
	1669	number_comb = -1
	1670
	1671
	1672	end if
	1673	;***************************************************
	1674	; REQUIRED IF combine=1 --c_var-- VARIABLES FOR COMBINING
	1675	;
[526]	1676	; names of variables;
	1677	; inidcate them with one comma before and after each variable
	1678	; if the name contains double quotes (") use dq and the '+' operation to
	1679	; concatenate the strings
[190]	1680	;
	1681	; data type: string
	1682	;
[526]	1683	; example: c_var = ",u,v,w,wpt,w"+dq+"pt"+dq+",wpt,"
[218]	1684	;
[190]	1685	; default: "c_variables"
	1686	;***************************************************
	1687	if (.not. isvar("c_var"))then
	1688
	1689
	1690	c_var = "c_variables"
	1691
	1692
	1693	end if
	1694	;***************************************************
	1695	; OPTIONAL --black-- BLACK OR COLOR LINES
	1696	;
	1697	; colored [=0] or black and white [=1] plots
	1698	;
	1699	; data type: integer
	1700	;
[218]	1701	; example: black = 0
	1702	;
[190]	1703	; default: 0
	1704	;***************************************************
	1705	if (.not. isvar("black"))then
	1706
	1707
	1708	black = 0
	1709
	1710
	1711	end if
	1712	;***************************************************
	1713	; OPTIONAL --dash-- DASHED LINES
	1714	;
[418]	1715	; use of different line patterns [=1] or continous lines [=0]
	1716	; for different time steps
[190]	1717	;
	1718	; data type: integer
	1719	;
[218]	1720	; example: dash = 0
	1721	;
[190]	1722	; default: 0
	1723	;***************************************************
	1724	if (.not. isvar("dash"))then
	1725
	1726
	1727	dash = 0
	1728
	1729
[218]	1730	end if
	1731	;***************************************************
	1732	; OPTIONAL --font_size-- FONT SIZE OF STRINGS
	1733	;
	1734	; font size can be changed to fit to the current plot
	1735	;
	1736	; data type: float
	1737	;
	1738	; example: font_size = 0.02
	1739	;
	1740	; default: 0.02
	1741	;***************************************************
	1742	if(.not. isvar("font_size"))then
	1743
	1744
	1745	font_size = 0.02
	1746
	1747
	1748	end if
	1749	;***************************************************
	1750	; OPTIONAL --font_size_legend-- FONT SIZE OF LEGEND STRINGS
	1751	;
	1752	; font size of the legend can be changed to fit to the current plot
	1753	;
	1754	; data type: float
	1755	;
	1756	; example: font_size_legend = 0.2
	1757	;
	1758	; default: 0.2
	1759	;***************************************************
	1760	if(.not. isvar("font_size_legend"))then
	1761
	1762
	1763	font_size_legend = 0.2
	1764
	1765
[190]	1766	end if
	1767	;***************************************************
	1768
	1769	end if
[194]	1770
[190]	1771	;******************************************************
	1772	; parameters used by SPECTRA
	1773	;******************************************************
	1774
[194]	1775	if (script .EQ. "spectra") then
	1776
[190]	1777	;***************************************************
	1778	; REQUIRED --file_1-- INPUT FILE
	1779	;
[418]	1780	; input file produced by PALM; if there is more than one file for
	1781	; all timesteps of a job chain,
	1782	; declare path and file name without cycle number and ".nc" (first and
[513]	1783	; last cycle numbers are given with the parameters
	1784	; 'start_f' and 'end_f');
[218]	1785	; otherwise declare path and full file name
[190]	1786	;
	1787	; data type: string
	1788	;
[418]	1789	; example: file_1 = "/path_to_file/file_sp"
	1790	; if you use more than one cycle number
	1791	; file_1 = "/path_to_file/file_sp.4.nc"
	1792	; if you use one file (e.g. with cycle number 4)
[218]	1793	;
[190]	1794	; default: "File in"
	1795	;***************************************************
[218]	1796	if(.not. isvar("file_1"))then
	1797
	1798
	1799	file_1 = "File in"
	1800
	1801
	1802	end if
	1803	;***************************************************
[513]	1804	; OPTIONAL/REQUIRED if more than one file of a job chain
[418]	1805	; --start_f-- START OF CYCLIC NUMBER
[218]	1806	;
[418]	1807	; if there is more than one file for all timesteps of a job chain,
[513]	1808	; declare the first cyclicnumber which contains timesteps
	1809	; you'd like to use
[218]	1810	;
	1811	; data type: integer
	1812	;
[418]	1813	; example: start_f = 3 (if first file: example_sp.3.nc) and
	1814	; start_f = 0 (if first file: example_sp.nc)
[218]	1815	;
	1816	; default: -1
	1817	;***************************************************
	1818	if (.not. isvar("start_f"))then
[190]	1819
	1820
[218]	1821	start_f = -1
[190]	1822
	1823
[218]	1824	end if
[190]	1825	;***************************************************
[513]	1826	; OPTIONAL/REQUIRED if more than one file of a job chain
[418]	1827	; --end_f-- END OF CYCLIC NUMBER
[218]	1828	;
[418]	1829	; if there is more than one file for all timesteps of a job chain,
[513]	1830	; declare the last cyclicnumber which contains timesteps
	1831	; you'd like to use
[218]	1832	;
	1833	; data type: integer
	1834	;
[418]	1835	; example: end_f = 48 (if last file: example_sp.48.nc) and
	1836	; end_f = 0 (if last file: example_sp.nc)
[218]	1837	;
	1838	; default: -1
	1839	;***************************************************
	1840	if (.not. isvar("end_f"))then
	1841
	1842
	1843	end_f = -1
	1844
	1845
	1846	end if
	1847	;***************************************************
[190]	1848	; OPTIONAL --format_out-- OUTPUT FORMAT
	1849	;
[418]	1850	; format of the output file;
[532]	1851	; supported file formats: x11, pdf, ps, eps, epsi, ncgm or png
[190]	1852	;
	1853	; data type: string
	1854	;
[218]	1855	; example: format_out = "pdf"
	1856	;
[190]	1857	; default: "x11"
	1858	;***************************************************
	1859	if (.not. isvar("format_out"))then
	1860
	1861
	1862	format_out = "x11"
	1863
	1864
	1865	end if
	1866	;***************************************************
	1867	; OPTIONAL --file_out-- OUTPUT FILE
	1868	;
[218]	1869	; path and name of the output file
[190]	1870	;
	1871	; data type: string
	1872	;
[218]	1873	; example: file_out = "/home/path_to_output/test_sp"
	1874	;
[194]	1875	; default: "~/test_sp"
[190]	1876	;***************************************************
	1877	if (.not. isvar("file_out"))then
	1878
	1879
	1880	file_out = "~/test_sp"
	1881
	1882
	1883	end if
	1884	;***************************************************
[218]	1885	; OPTIONAL --no_columns-- NUMBER OF COLUMNS
[190]	1886	;
	1887	; number of plots in one row
	1888	;
	1889	; data type: integer
[218]	1890	;
	1891	; example: no_columns = 1
[190]	1892	;
	1893	; default: 1
	1894	;***************************************************
	1895	if (.not. isvar("no_columns"))then
	1896
	1897
	1898	no_columns = 1
	1899
	1900
	1901	end if
	1902	;***************************************************
[218]	1903	; OPTIONAL --no_rows-- NUMBER OF ROWS
[190]	1904	;
	1905	; number of plots in one column
	1906	;
	1907	; data type: integer
[218]	1908	;
	1909	; example: no_rows = 2
[190]	1910	;
	1911	; default: 2
	1912	;***************************************************
[218]	1913	if (.not. isvar("no_rows"))then
[190]	1914
	1915
[218]	1916	no_rows = 2
[190]	1917
	1918
	1919	end if
	1920	;***************************************************
	1921	; OPTIONAL --var-- OUTPUT VARIABLES
	1922	;
[526]	1923	; names of output variables;
	1924	; inidcate them with one comma before and after each variable
	1925	; if the name contains double quotes (") use dq and the '+' operation to
	1926	; concatenate the strings
[190]	1927	;
	1928	; data type: string
[218]	1929	;
[342]	1930	; example: var = ",u,v,w,"
[190]	1931	;
[218]	1932	; default: "all" (all available variables are plotted)
[190]	1933	;***************************************************
	1934	if (.not. isvar("var"))then
	1935
	1936
	1937	var = "all"
	1938
	1939
	1940	end if
	1941	;***************************************************
	1942	; OPTIONAL --height_level-- HEIGHT LEVELS
	1943	;
[418]	1944	; defines if all levels or selected levels are output;
	1945	; a 1D array with up to 100 elements
[218]	1946	; from 0 to 99 must be indicated
[190]	1947	;
	1948	; data type: integer array
	1949	;
[218]	1950	; example: height_level=(/0,3,7/)
	1951	;
	1952	; default: (/-1/) (all levels are output)
[190]	1953	;***************************************************
	1954	if (.not. isvar("height_level"))then
	1955
	1956
	1957	height_level = (/-1/)
	1958
	1959
	1960	end if
	1961	;***************************************************
	1962	; OPTIONAL --sort-- TYPE OF SORTING
	1963	;
[418]	1964	; defines if all heights [="height"] or all timesteps [="time"]
	1965	; are merged in one plot
[190]	1966	;
	1967	; data type: string
	1968	;
[218]	1969	; example: sort = "height"
	1970	;
[190]	1971	; default: "height"
	1972	;***************************************************
	1973	if (.not. isvar("sort"))then
	1974
	1975
	1976	sort = "height"
	1977
	1978
	1979	end if
	1980	;***************************************************
	1981	; OPTIONAL --start_time_step-- FIRST TIME STEP
	1982	;
[418]	1983	; first time step of plot; there is no need to specify a precise
	1984	; time value from the input file,
[218]	1985	; 'start_time_step' is rounded to the next existent time step
[190]	1986	;
	1987	; data type: double; dimension: [hour]
	1988	;
[418]	1989	; example: start_time_step = 0.5d
[218]	1990	;
[190]	1991	; default: -1.d (first available time step)
	1992	;***************************************************
	1993	if (.not. isvar("start_time_step"))then
	1994
	1995
	1996	start_time_step = -1.d
	1997
	1998
	1999	end if
	2000	;***************************************************
	2001	; OPTIONAL --end_time_step-- LAST TIME STEP
	2002	;
[418]	2003	; last time step of plot; there is no need to specify a precise
	2004	; time value from the input file,
[218]	2005	; 'end_time_step' is rounded to the next existent time step
[190]	2006	;
	2007	; data type: double; dimension: [hour]
	2008	;
[418]	2009	; example: end_time_step = 2.0d
[218]	2010	;
[190]	2011	; default: -1.d (last available time step)
	2012	;***************************************************
	2013	if (.not. isvar("end_time_step"))then
	2014
	2015
	2016	end_time_step = -1.d
	2017
	2018
	2019	end if
	2020	;***************************************************
	2021	; OPTIONAL --black-- BLACK OR COLOR LINES
	2022	;
	2023	; colored [=0] or black and white [=1] plots
	2024	;
	2025	; data type: integer
	2026	;
[218]	2027	; example: black = 0
	2028	;
[190]	2029	; default: 0
	2030	;***************************************************
	2031	if (.not. isvar("black"))then
	2032
	2033
	2034	black = 0
	2035
	2036
	2037	end if
	2038	;***************************************************
	2039	; OPTIONAL --dash-- DASHED LINES
	2040	;
	2041	; use of different line patterns [=1] or continous lines [=0]
	2042	;
	2043	; data type: integer
	2044	;
[218]	2045	; example: dash = 0
	2046	;
[190]	2047	; default: 0
	2048	;***************************************************
	2049	if (.not. isvar("dash"))then
	2050
	2051
	2052	dash = 0
	2053
	2054
	2055	end if
	2056	;***************************************************
[218]	2057	; OPTIONAL --log_x-- LOGARITHMIC SCALE X-AXIS
[190]	2058	;
[218]	2059	; logarithmic scale for x-axis is switched on [=1] or off [=0]
[190]	2060	;
	2061	; data type: integer
	2062	;
[218]	2063	; example: log_x = 1
	2064	;
[190]	2065	; default: 1
	2066	;***************************************************
[218]	2067	if (.not. isvar("log_x"))then
[190]	2068
	2069
[218]	2070	log_x = 1
[190]	2071
	2072
	2073	end if
	2074	;***************************************************
[218]	2075	; OPTIONAL --log_y-- LOGARITHMIC SCALE Y-AXIS
[190]	2076	;
[218]	2077	; logarithmic scale for y-axis is switched on [=1] or off [=0]
[190]	2078	;
	2079	; data type: integer
	2080	;
[218]	2081	; example: log_y = 1
	2082	;
[190]	2083	; default: 1
	2084	;***************************************************
[218]	2085	if (.not. isvar("log_y"))then
[190]	2086
	2087
[218]	2088	log_y = 1
[190]	2089
	2090
	2091	end if
	2092	;***************************************************
[218]	2093	; OPTIONAL --norm_x-- NORMALISING X-AXIS
[190]	2094	;
	2095	; value for normalising the x-axis
	2096	;
	2097	; data type: float
	2098	;
[513]	2099	; example: norm_x = 1.
[218]	2100	;
[190]	2101	; default: 1. (no normalising)
	2102	;***************************************************
[218]	2103	if (.not. isvar("norm_x"))then
[190]	2104
	2105
[218]	2106	norm_x = 1.
[190]	2107
	2108
[218]	2109	end if
	2110	;***************************************************
	2111	; OPTIONAL --norm_height-- NORMALISING X-AXIS WITH HEIGHT
	2112	;
[418]	2113	; normalising the x-axis with the height of each spectra
	2114	; is switched on [=1] or off [=0]
[218]	2115	;
	2116	; data type: integer
	2117	;
	2118	; example: norm_height = 0
	2119	;
	2120	; default: 0 (no normalising)
	2121	;***************************************************
	2122	if (.not. isvar("norm_height"))then
	2123
	2124
	2125	norm_height = 0
	2126
	2127
[190]	2128	end if
	2129	;***************************************************
[218]	2130	; OPTIONAL --norm_y-- NORMALISE Y-AXIS
[190]	2131	;
	2132	; value for normalising the y-axis
	2133	;
	2134	; data type: float
	2135	;
[218]	2136	; example: norm_y = 1.
	2137	;
[190]	2138	; default: 1. (no normalising)
	2139	;***************************************************
[218]	2140	if (.not. isvar("norm_y"))then
[190]	2141
	2142
[218]	2143	norm_y = 1.
[190]	2144
	2145
[218]	2146	end if
[190]	2147	;***************************************************
[218]	2148	; OPTIONAL --unit_x--unit_y-- UNITS OF X-, Y-AXES
	2149	;
[513]	2150	; unit of the x-axis can be set if norm_x is unequal 1,
	2151	; otherwise the unit is [1/m]; by default no unit is set for the y-axis
[218]	2152	;
	2153	; data type: string,
	2154	;
	2155	; example: unit_x = "100/m"
	2156	;
	2157	; default: " "
	2158	;***************************************************
	2159	if(.not. isvar("unit_x"))then
	2160
	2161	unit_x = " "
	2162
	2163	end if
	2164	if(.not. isvar("unit_y"))then
	2165
	2166	unit_y = " "
	2167
	2168	end if
	2169	;***************************************************
	2170	; OPTIONAL --font_size-- FONT SIZE OF STRINGS
	2171	;
	2172	; font size can be changed to fit to the current plot
	2173	;
	2174	; data type: float
	2175	;
	2176	; example: font_size = 0.02
	2177	;
	2178	; default: 0.02
	2179	;***************************************************
	2180	if(.not. isvar("font_size"))then
	2181
	2182
	2183	font_size = 0.02
	2184
	2185
	2186	end if
	2187	;***************************************************
	2188	; OPTIONAL --font_size_legend-- FONT SIZE OF LEGEND STRINGS
	2189	;
	2190	; font size of the legend can be changed to fit to the current plot
	2191	;
	2192	; data type: float
	2193	;
[534]	2194	; example: font_size_legend = 0.02
[218]	2195	;
[534]	2196	; default: 0.02
[218]	2197	;***************************************************
	2198	if(.not. isvar("font_size_legend"))then
	2199
	2200
[534]	2201	font_size_legend = 0.02
[218]	2202
	2203
	2204	end if
	2205	;***************************************************
[190]	2206
	2207	end if
[194]	2208
[190]	2209	;******************************************************
	2210	; parameters used by TIMESERIES
	2211	;******************************************************
	2212
[194]	2213	if (script .EQ. "timeseries") then
	2214
[190]	2215	;***************************************************
	2216	; REQUIRED --file_1-- INPUT FILE
	2217	;
[418]	2218	; input file produced by PALM; if there is more than one file for
	2219	; all timesteps of a job chain,
	2220	; declare path and file name without cycle number and ".nc" (first and
[513]	2221	; last cycle numbers are given with the parameters
	2222	; 'start_f' and 'end_f');
[218]	2223	; otherwise declare path and full file name
[190]	2224	;
	2225	; data type: string
	2226	;
[418]	2227	; example: file_1 = "/path_to_file/file_ts"
	2228	; if you use more than one cycle number
	2229	; file_1 = "/path_to_file/file_ts.4.nc"
	2230	; if you use one file (e.g. with cycle number 4)
[218]	2231	;
[190]	2232	; default: "File in"
	2233	;***************************************************
[218]	2234	if(.not. isvar("file_1"))then
	2235
	2236
[267]	2237	file_1 = "File in"
[218]	2238
	2239
	2240	end if
	2241	;***************************************************
[513]	2242	; OPTIONAL/REQUIRED if more than one file of a job chain
[418]	2243	; --start_f-- START OF CYCLIC NUMBER
[218]	2244	;
[418]	2245	; if there is more than one file for all timesteps of a job chain,
[513]	2246	; declare the first cyclicnumber which contains timesteps
	2247	; you'd like to use
[218]	2248	;
	2249	; data type: integer
	2250	;
[418]	2251	; example: start_f = 3 (if first file: example_ts.3.nc) and
	2252	; start_f = 0 (if first file: example_ts.nc)
[218]	2253	;
	2254	; default: -1
	2255	;***************************************************
	2256	if (.not. isvar("start_f"))then
[190]	2257
	2258
[218]	2259	start_f = -1
[190]	2260
	2261
[218]	2262	end if
[190]	2263	;***************************************************
[513]	2264	; OPTIONAL/REQUIRED if more than one file of a job chain
[418]	2265	; --end_f-- END OF CYCLIC NUMBER
[218]	2266	;
[418]	2267	; if there is more than one file for all timesteps of a job chain,
[513]	2268	; declare the last cyclicnumber which contains timesteps
	2269	; you'd like to use
[218]	2270	;
	2271	; data type: integer
	2272	;
[418]	2273	; example: end_f = 48 (if last file: example_ts.48.nc) and
	2274	; end_f = 0 (if last file: example_ts.nc)
[218]	2275	;
	2276	; default: -1
	2277	;***************************************************
	2278	if (.not. isvar("end_f"))then
	2279
	2280
	2281	end_f = -1
	2282
	2283
	2284	end if
	2285	;***************************************************
[190]	2286	; OPTIONAL --format_out-- OUTPUT FORMAT
	2287	;
[418]	2288	; format of the output file;
[532]	2289	; supported file formats: x11, pdf, ps, eps, epsi, ncgm or png
[190]	2290	;
	2291	; data type: string
	2292	;
[218]	2293	; example: format_out = "pdf"
	2294	;
[190]	2295	; default: "x11"
	2296	;***************************************************
	2297	if (.not. isvar("format_out"))then
	2298
	2299
	2300	format_out = "x11"
	2301
	2302
	2303	end if
	2304	;***************************************************
	2305	; OPTIONAL --file_out-- OUTPUT FILE
	2306	;
[218]	2307	; path and name of the output file
[190]	2308	;
	2309	; data type: string
	2310	;
[218]	2311	; example: file_out = "/home/path_to_output/test_ts"
	2312	;
[194]	2313	; default: "~/test_ts"
[190]	2314	;***************************************************
	2315	if (.not. isvar("file_out"))then
	2316
	2317
	2318	file_out = "~/test_ts"
	2319
	2320
	2321	end if
	2322	;***************************************************
[218]	2323	; OPTIONAL --no_columns-- NUMBER OF COLUMNS
[190]	2324	;
	2325	; number of plots in one row
	2326	;
	2327	; data type: integer
[218]	2328	;
	2329	; example: no_columns = 1
[190]	2330	;
	2331	; default: 1
	2332	;***************************************************
	2333	if (.not. isvar("no_columns"))then
	2334
	2335
	2336	no_columns = 1
	2337
	2338
	2339	end if
	2340	;***************************************************
[218]	2341	; OPTIONAL --no_rows-- NUMBER OF ROWS
[190]	2342	;
	2343	; number of plots in one column
	2344	;
	2345	; data type: integer
[218]	2346	;
	2347	; example: no_rows = 2
[190]	2348	;
	2349	; default: 2
	2350	;***************************************************
[218]	2351	if (.not. isvar("no_rows"))then
[190]	2352
	2353
[267]	2354	no_rows = 1
[190]	2355
	2356
	2357	end if
	2358	;***************************************************
	2359	; OPTIONAL --var-- OUTPUT VARIABLES
	2360	;
[526]	2361	; names of output variables;
	2362	; inidcate them with one comma before and after each variable
	2363	; if the name contains double quotes (") use dq and the '+' operation to
	2364	; concatenate the strings
[190]	2365	;
	2366	; data type: string
[218]	2367	;
[526]	2368	; example: var = ",umax,vmax,wmax,w"+dq+"pt"+dq+"0,"
[190]	2369	;
[218]	2370	; default: "all" (all available variables are plotted)
[190]	2371	;***************************************************
	2372	if (.not. isvar("var"))then
	2373
	2374
	2375	var = "all"
	2376
	2377
	2378	end if
	2379	;***************************************************
	2380	; OPTIONAL --start_time_step-- FIRST TIME STEP
	2381	;
[418]	2382	; first time step of plot; there is no need to specify a precise
	2383	; time value from the input file,
[218]	2384	; 'start_time_step' is rounded to the next existent time step
[190]	2385	;
	2386	; data type: double; dimension: [hour]
	2387	;
[418]	2388	; example: start_time_step = 0.5d
[218]	2389	;
[190]	2390	; default: -1.d (first available time step)
	2391	;***************************************************
	2392	if (.not. isvar("start_time_step"))then
	2393
	2394
	2395	start_time_step = -1.d
	2396
	2397
	2398	end if
	2399	;***************************************************
	2400	; OPTIONAL --end_time_step-- LAST TIME STEP
	2401	;
[418]	2402	; last time step of plot; there is no need to specify a precise
	2403	; time value from the input file,
[218]	2404	; 'end_time_step' is rounded to the next existent time step
[190]	2405	;
	2406	; data type: double; dimension: [hour]
	2407	;
[418]	2408	; example: end_time_step = 2.0d
[218]	2409	;
[190]	2410	; default: -1.d (last available time step)
	2411	;***************************************************
	2412	if (.not. isvar("end_time_step"))then
	2413
	2414
	2415	end_time_step = -1.d
	2416
[267]	2417
[190]	2418	end if
	2419	;***************************************************
	2420	; OPTIONAL --over-- OVERLAYING
	2421	;
[513]	2422	; predefined overlaying of standard variables are switched
	2423	; on [=1] or off [=0];
[190]	2424	; this feature cannot be used with statistic regions
	2425	;
	2426	; data type: integer
	2427	;
[218]	2428	; example: over = 0
	2429	;
[190]	2430	; default: 0
	2431	;***************************************************
	2432	if (.not. isvar("over"))then
	2433
	2434
	2435	over = 0
	2436
	2437
[218]	2438	end if
	2439	;***************************************************
	2440	; OPTIONAL --font_size-- FONT SIZE OF STRINGS
	2441	;
	2442	; font size can be changed to fit to the current plot
	2443	;
	2444	; data type: float
	2445	;
	2446	; example: font_size = 0.07
	2447	;
	2448	; default: 0.07
	2449	;***************************************************
	2450	if(.not. isvar("font_size"))then
	2451
	2452
	2453	font_size = 0.07
	2454
	2455
[190]	2456	end if
	2457	;***************************************************
[218]	2458	; OPTIONAL --norm_t-- NORMALISING X-AXIS OF TIMESERIES PLOTS (T-AXIS)
	2459	;
[513]	2460	; normalising the x-axis with the given value;
	2461	; the unit can explicitly set;
[418]	2462	; by default no normalising and unit is set to [s]
[218]	2463	;
	2464	; data type: float
	2465	;
[418]	2466	; example: norm_t = 3600.
[218]	2467	;
	2468	; default: 1.
	2469	;***************************************************
[513]	2470	if(.not. isvar("norm_t"))then
[218]	2471
	2472
	2473	norm_t = 1.
	2474
	2475
	2476	end if
	2477	;***************************************************
	2478	; OPTIONAL --unit_t-- UNIT OF X-AXIS OF TIMESERIES PLOTS (T-AXIS)
	2479	;
	2480	; unit of the x-axis can be set; by default unit is set to [s]
	2481	;
	2482	; data type: string
	2483	;
	2484	; example: unit_t = "h"
	2485	;
	2486	; default: " "
	2487	;***************************************************
[513]	2488	if(.not. isvar("unit_t"))then
[218]	2489
	2490
	2491	unit_t = " "
	2492
	2493
	2494	end if
	2495	;***************************************************
[190]	2496
	2497	end if
	2498
	2499	;*********************************************************
	2500
	2501	end

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format