Home

Context Navigation

.ncl.config.default @ 481

Last change on this file since 481 was 418, checked in by heinze, 15 years ago
ncl_preferences is renamed .ncl.config.default
File size: 68.1 KB

Rev	Line
[418]	1	;*********************************************************
	2	; Copying .hluresfile in the home directory
	3	;*********************************************************
	4
	5	command = "ksh 'if [ ! -f $HOME/.hluresfile ]; then; "+\
	6	"cp $PALM_BIN/NCL/.hluresfile $HOME; fi'"
	7	system(command)
	8
	9	;*********************************************************
	10
	11
[190]	12	begin
	13
	14	;*********************************************************
[194]	15
	16	script=which_script
[190]	17
	18	;*********************************************************
[194]	19
[190]	20	;******************************************************
	21	; parameters used by CROSS_SECTIONS
	22	;******************************************************
	23
[194]	24	if (script .EQ. "cross_section")then
[190]	25
	26	;***************************************************
	27	; REQUIRED --file_1-- INPUT FILE
	28	;
[418]	29	; input file produced by PALM; if there is more than one file for
	30	; all timesteps
	31	; of a job chain,
	32	; declare path and file name without cycle number and ".nc" (first and
	33	; last cycle numbers are given with the parameters 'start_f' and
	34	; 'end_f');
[218]	35	; otherwise declare path and full file name
[190]	36	;
	37	; data type: string
	38	;
[418]	39	; example: file_1 = "/path_to_file/file_xy_av" if you use more than
	40	; one cycle number
	41	; file_1 = "/path_to_file/file_xy_av.4.nc" if you use one file
	42	; (e.g. with cycle number 4)
[218]	43	;
[190]	44	; default: "File in"
	45	;***************************************************
	46	if(.not. isvar("file_1"))then
[194]	47
	48
[267]	49	file_1 = "File in"
[190]	50
[194]	51
[190]	52	end if
	53	;***************************************************
[418]	54	; REQUIRED if more than one file of a job chain
	55	; --start_f-- START OF CYCLIC NUMBER
[190]	56	;
[418]	57	; if there is more than one file for all timesteps of a job chain,
	58	; declare the first cyclicnumber which contains timesteps
	59	; you'd like to use
[218]	60	;
	61	; data type: integer
	62	;
[418]	63	; example: start_f = 3 (if first file: example_xy_av.3.nc) and
	64	; start_f = 0 (if first file: example_xy_av.nc)
[218]	65	;
	66	; default: -1
	67	;***************************************************
	68	if (.not. isvar("start_f"))then
	69
	70
	71	start_f = -1
	72
	73
	74	end if
	75	;***************************************************
	76	; REQUIRED if more than one file of a job chain --end_f-- END OF CYCLIC NUMBER
	77	;
[418]	78	; if there is more than one file for all timesteps of a job chain, declare
	79	; the last cyclicnumber which contains timesteps you'd like to use
[218]	80	;
	81	; data type: integer
	82	;
[418]	83	; example: end_f = 48 (if last file: example_xy_av.48.nc) and
	84	; end_f = 0 (if last file: example_xy_av.nc)
[218]	85	;
	86	; default: -1
	87	;***************************************************
	88	if (.not. isvar("end_f"))then
	89
	90
	91	end_f = -1
	92
	93
	94	end if
	95	;***************************************************
	96	; REQUIRED --xyc--xzc--yzc-- SELECTION of XY or XZ or YZ CROSS SECTIONS
	97	;
[418]	98	; desired section has to be set to 1;
	99	; e.g.: xyc=1, xzc=0 and yzc=0 for xy-section
[190]	100	;
	101	; data type: integer
	102	;
[218]	103	; example: xyc = 1
	104	; xzc = 0
	105	; yzc = 0
	106	;
[190]	107	; default: 0
	108	;***************************************************
	109	if(.not. isvar("xyc"))then
	110
	111	xyc = 0
	112
	113	end if
	114	if (.not. isvar("xzc"))then
	115
	116	xzc = 0
	117
	118	end if
	119	if (.not. isvar("yzc"))then
	120
	121	yzc = 0
	122
	123	end if
	124	;***************************************************
	125	; OPTIONAL --format_out-- OUTPUT FORMAT
	126	;
[418]	127	; format of the output file;
	128	; supported file formats: x11, pdf, ps, eps, epsi or ncgm
[190]	129	;
	130	; data type: string
	131	;
[218]	132	; example: format_out = "pdf"
	133	;
[190]	134	; default: "x11"
	135	;***************************************************
	136	if(.not. isvar("format_out"))then
	137
	138
	139	format_out = "x11"
	140
	141
	142	end if
	143	;***************************************************
	144	; OPTIONAL --file_out-- OUTPUT FILE
	145	;
[218]	146	; path and name of the output file
[190]	147	;
	148	; data type: string
	149	;
[218]	150	; example: file_out = "/home/path_to_output/test_cs"
	151	;
[194]	152	; default: "~/test_cs"
[190]	153	;***************************************************
	154	if(.not. isvar("file_out"))then
	155
	156
	157	file_out = "~/test_cs"
	158
	159
	160	end if
	161	;***************************************************
[218]	162	; OPTIONAL --no_columns-- NUMBER OF COLUMNS
[190]	163	;
	164	; number of plots in one row
	165	;
	166	; data type: integer
[218]	167	;
	168	; example: no_columns = 1
[190]	169	;
	170	; default: 1
	171	;***************************************************
	172	if(.not. isvar("no_columns"))then
	173
	174
	175	no_columns = 1
	176
	177
	178	end if
	179	;***************************************************
[218]	180	; OPTIONAL --no_rows-- NUMBER OF ROWS
[190]	181	;
	182	; number of plots in one column
	183	;
	184	; data type: integer
[218]	185	;
	186	; example: no_rows = 2
[190]	187	;
	188	; default: 2
	189	;***************************************************
[218]	190	if(.not. isvar("no_rows"))then
[190]	191
	192
[218]	193	no_rows = 2
[190]	194
	195
	196	end if
	197	;***************************************************
	198	; OPTIONAL --sort-- TYPE OF SORTING
	199	;
[418]	200	; sequence of plots; sorting either by time step [="time"] or
	201	; by layer/height [="layer"]
[190]	202	;
	203	; data type: string
	204	;
[218]	205	; example: sort = "layer"
	206	;
[190]	207	; default: "layer"
	208	;***************************************************
	209	if(.not. isvar("sort"))then
	210
	211
	212	sort = "layer"
	213
	214
	215	end if
	216	;***************************************************
	217	; OPTIONAL --var-- OUTPUT VARIABLES
	218	;
[418]	219	; names of output variables; inidcate them with one comma before and after
	220	; each variable
[190]	221	;
	222	; data type: string
[218]	223	;
[342]	224	; example: var = ",u,v,w,"
[190]	225	;
[218]	226	; default: "all" (all available variables are plotted)
[190]	227	;***************************************************
	228	if(.not. isvar("var"))then
	229
	230
	231	var = "all"
	232
	233
	234	end if
	235	;***************************************************
	236	; OPTIONAL --start_time_step-- FIRST TIME STEP
	237	;
[418]	238	; first time step of plot; there is no need to specify a precise time
	239	; value from the input file,
[218]	240	; 'start_time_step' is rounded to the next existent time step
[190]	241	;
	242	; data type: double; dimension: [hour]
	243	;
[418]	244	; example: start_time_step = 0.5d
[218]	245	;
[190]	246	; default: -1.d (first available time step)
	247	;***************************************************
	248	if(.not. isvar("start_time_step"))then
	249
	250
	251	start_time_step = -1.d
	252
	253
	254	end if
	255	;***************************************************
	256	; OPTIONAL --end_time_step-- LAST TIME STEP
	257	;
[418]	258	; last time step of plot; there is no need to specify a precise time
	259	; value from the input file,
[218]	260	; 'end_time_step' is rounded to the next existent time step
[190]	261	;
	262	; data type: double; dimension: [hour]
	263	;
[418]	264	; example: end_time_step = 2.0d
[218]	265	;
[190]	266	; default: -1.d (last available time step)
	267	;***************************************************
	268	if(.not. isvar("end_time_step"))then
	269
	270
	271	end_time_step = -1.d
	272
	273
	274	end if
	275	;***************************************************
	276	; OPTIONAL --xs-- MINIMUM X-AXIS
	277	;
[418]	278	; value for minimum of x-axis, selectable if there are NO preseted layers
	279	; for x (as for XY or XZ 2D-DATA);
	280	; there is no need to specify a precise meter value from the input file,
	281	; it is rounded to the next existent value
[190]	282	;
	283	; data type: double; dimension: [meter]
	284	;
[418]	285	; example: xs = 150.0d
[218]	286	;
[190]	287	; default: -1.d (minimum of range)
	288	;***************************************************
	289	if(.not. isvar("xs"))then
	290
	291
	292	xs = -1.d
	293
	294
	295	end if
	296	;***************************************************
	297	; OPTIONAL --xe-- MAXIMUM X-AXIS
	298	;
[418]	299	; value for maximum of x-axis, selectable if there are NO preseted layers
	300	; for x (as for XY or XZ 2D-DATA);
	301	; there is no need to specify a precise meter value from the input file,
	302	; it is rounded to the next existent value
[190]	303	;
	304	; data type: double; dimension: [meter]
	305	;
[418]	306	; example: xe = 300.0d
[218]	307	;
[190]	308	; default: -1.d (maximum of range)
	309	;***************************************************
	310	if(.not. isvar("xe"))then
	311
	312
	313	xe = -1.d
	314
	315
	316	end if
	317	;***************************************************
	318	; OPTIONAL --ys-- MINIMUM Y-AXIS
	319	;
[418]	320	; value for minimum of y-axis, selectable if there are NO preseted layers
	321	; for y (as for XY or YZ 2D-DATA);
	322	; there is no need to specify a precise meter value from the input file,
	323	; it is rounded to the next existent value
[190]	324	;
	325	; data type: double; dimension: [meter]
	326	;
[418]	327	; example: ys = 150.0d
[218]	328	;
[190]	329	; default: -1.d (minimum of range)
	330	;***************************************************
	331	if(.not. isvar("ys"))then
	332
	333
	334	ys = -1.d
	335
	336
	337	end if
	338	;***************************************************
	339	; OPTIONAL --ye-- MAXIMUM Y-AXIS
	340	;
[418]	341	; value for maximum of y-axis, selectable if there are NO preseted layers
	342	; for y (as for XY or YZ 2D-DATA);
	343	; there is no need to specify a precise meter value from the input file,
	344	; it is rounded to the next existent value
[190]	345	;
	346	; data type: double; dimension: [meter]
	347	;
[418]	348	; example: ye = 300.0d
[218]	349	;
[190]	350	; default: -1.d (maximum of range)
	351	;***************************************************
	352	if(.not. isvar("ye"))then
	353
	354
	355	ye = -1.d
	356
	357
	358	end if
	359	;***************************************************
	360	; OPTIONAL --zs-- MINIMUM Z-AXIS
	361	;
[418]	362	; index for minimum of z-axis, selectable if there are NO preseted layers
	363	; for z (as for XZ or YZ 2D-DATA);
[194]	364	; you cannot specify a meter value from the input file due to grid stretching
[190]	365	;
	366	; data type: integer
	367	;
[218]	368	; example: zs = 0
	369	;
[190]	370	; default: -1 (minimum of range)
	371	;***************************************************
	372	if(.not. isvar("zs"))then
	373
	374
	375	zs = -1
	376
	377
	378	end if
	379	;***************************************************
	380	; OPTIONAL --ze-- MAXIMUM Z-AXIS
	381	;
[418]	382	; index for maximum of z-axis, selectable if there are NO preseted layers
	383	; for z (as for XZ or YZ 2D-DATA);
[194]	384	; you cannot specify a meter value from the input file due to grid stretching
[190]	385	;
	386	; data type: integer
	387	;
[218]	388	; example: ze = 15
	389	;
[190]	390	; default: -1 (maximum of range)
	391	;***************************************************
	392	if(.not. isvar("ze"))then
	393
	394
	395	ze = -1
	396
	397
	398	end if
	399	;***************************************************
	400	; OPTIONAL --mode-- TYPE OF PLOT
	401	;
[418]	402	; isoline plots [="Line"], contour plots [="Fill"] or both [="Both"]
	403	; can be choosen
[190]	404	;
	405	; data type: string
	406	;
[218]	407	; example: mode = "Fill"
	408	;
[190]	409	; default: "Fill"
	410	;***************************************************
	411	if(.not. isvar("mode"))then
	412
	413
	414	mode = "Fill"
	415
	416
	417	end if
	418	;***************************************************
	419	; OPTIONAL --fill_mode-- TYPE OF FILLING
	420	;
[418]	421	; area fill [="AreaFill"], raster fill [="RasterFill"] or
	422	; cell fill [="CellFill"] can be choosen
[190]	423	;
	424	; data type: string
	425	;
[218]	426	; example: fill_mode = "AreaFill"
	427	;
[190]	428	; default: "AreaFill"
	429	;***************************************************
	430	if(.not. isvar("fill_mode"))then
	431
	432
	433	fill_mode = "AreaFill"
	434
	435
	436	end if
	437	;***************************************************
	438	; OPTIONAL --shape-- ASPECT RATIO
	439	;
[218]	440	; aspect ratio of axis is kept [=1] or not[=0]
[190]	441	;
	442	; data type: integer
	443	;
[218]	444	; example: shape = 1
	445	;
[190]	446	; default: 1
	447	;***************************************************
	448	if(.not. isvar("shape"))then
	449
	450
	451	shape = 1
	452
	453
[218]	454	end if
[190]	455	;***************************************************
[218]	456	; OPTIONAL --font_size-- FONT SIZE OF STRINGS
	457	;
	458	; font size can be changed to fit to the current plot
	459	;
	460	; data type: float
	461	;
	462	; example: font_size = 0.04
	463	;
	464	; default: 0.04
	465	;***************************************************
	466	if(.not. isvar("font_size"))then
	467
	468
	469	font_size = 0.04
	470
	471
	472	end if
	473	;***************************************************
	474	; OPTIONAL --font_size_legend-- FONT SIZE OF LEGEND STRINGS
	475	;
	476	; font size of the legend can be changed to fit to the current plot
	477	;
	478	; data type: float
	479	;
	480	; example: font_size_legend = 0.02
	481	;
	482	; default: 0.02
	483	;***************************************************
	484	if(.not. isvar("font_size_legend"))then
	485
	486
	487	font_size_legend = 0.02
	488
	489
	490	end if
	491	;***************************************************
[418]	492	; OPTIONAL --legend_label_stride-- REDUCTION OF THE NUMBER
	493	; OF LABELS IN THE LEGEND
[218]	494	;
[418]	495	; if legend_label_stride is set to 1 every label is shown;
	496	; if set to 2 every second, ...
[218]	497	;
	498	; data type: integer
	499	;
	500	; example: legend_label_stride = 2
	501	;
	502	; default: 2
	503	;***************************************************
	504	if(.not. isvar("legend_label_reduction"))then
	505
	506
	507	legend_label_stride = 2
	508
	509
	510	end if
	511	;***************************************************
	512	; OPTIONAL --axes_explicit-- EXPLICIT SETTINGS OF X- AND Y-AXES ARE SWITCHED ON
	513	;
[418]	514	; to use several parameters to set up the axes, 'axes_explicit'
	515	; must be switched on [=1]; if switched off [=0] units of axes are [m]
[218]	516	;
	517	; data type: integer
	518	;
	519	; example: axes_explicit = 0
	520	;
	521	; default: 0
	522	;***************************************************
	523	if(.not. isvar("axes_explicit"))then
	524
	525
	526	axes_explicit = 0
	527
	528
	529	end if
	530	;***************************************************
[418]	531	; OPTIONAL if axes_explicit = 1 --major_ticks_x--
	532	; NUMBER OF MAJOR TICK MARKS AT X-AXIS
[218]	533	;
[418]	534	; major_ticks_x can be set to any integer, best segmentation of x-axis
	535	; can be achieved, if
	536	; (number of gripdpoints in x-direction)/(major_ticks_x-1)=INTEGER,
	537	; e.g. 128/8 = 16 -> major_ticks_x should be set to 9
[218]	538	;
	539	; data type: integer
	540	;
	541	; example: major_ticks_x = 6
	542	;
	543	; default: 6
	544	;***************************************************
	545	if(.not. isvar("major_ticks_x"))then
	546
	547
	548	major_ticks_x = 6
	549
	550
	551	end if
	552	;***************************************************
[418]	553	; OPTIONAL if axes_explicit = 1 --major_ticks_y--
	554	; NUMBER OF MAJOR TICK MARKS AT Y-AXIS
[218]	555	;
[418]	556	; major_ticks_y can be set to any integer, best segmentation of y-axis
	557	; can be achieved, if
	558	; (number of gripdpoints in y-direction)/(major_ticks_y-1)=INTEGER,
	559	; e.g. 128/8 = 16 -> major_ticks_y should be set to 9
[218]	560	;
	561	; data type: integer
	562	;
	563	; example: major_ticks_y = 6
	564	;
	565	; default: 6
	566	;***************************************************
	567	if(.not. isvar("major_ticks_y"))then
	568
	569
	570	major_ticks_y = 6
	571
	572
	573	end if
	574	;***************************************************
[418]	575	; OPTIONAL if axes_explicit = 1 --norm_x--norm_y--norm_z--
	576	; NORMALISE X-, Y- and Z-AXES
[218]	577	;
[418]	578	; normalising the axes with the given value; units can explicitly be set;
	579	; by default no normalising is used and units are [meter]
[218]	580	;
	581	; data type: float
	582	;
[418]	583	; default: 1.0
[218]	584	;***************************************************
	585	if(.not. isvar("norm_x"))then
	586
[418]	587	norm_x = 1.0
[218]	588
	589	end if
	590	if(.not. isvar("norm_y"))then
	591
[418]	592	norm_y = 1.0
[218]	593
	594	end if
	595	if(.not. isvar("norm_z"))then
	596
[418]	597	norm_z = 1.0
[218]	598
	599	end if
	600	;***************************************************
[418]	601	; OPTIONAL if axes_explicit = 1 --unit_x--unit_y--unit_z--
	602	; UNITS OF X-, Y- and Z-AXES
[218]	603	;
[418]	604	; units of the axes can be set; by default no units are given,
	605	; if norm_x, norm_y or norm_z are unequal 1., otherwise units are [meter]
[218]	606	;
	607	; data type: string,
	608	;
	609	; example: unit_x = "m/s"
	610	;
	611	; default: " "
	612	;***************************************************
	613	if(.not. isvar("unit_x"))then
	614
	615	unit_x = " "
	616
	617	end if
	618	if(.not. isvar("unit_y"))then
	619
	620	unit_y = " "
	621
	622	end if
	623	if(.not. isvar("unit_z"))then
	624
	625	unit_z = " "
	626
	627	end if
	628	;***************************************************
[190]	629	; OPTIONAL --vector-- VECTOR PLOT
	630	;
[218]	631	; a vector plot for one defined vector is switched on [=1] or off [=0]
[190]	632	;
	633	; data type: integer
	634	;
[218]	635	; example: vector = 0
	636	;
[190]	637	; default: 0
	638	;***************************************************
	639	if(.not. isvar("vector"))then
	640
	641
	642	vector = 0
	643
	644
	645	end if
	646	;***************************************************
	647	; REQUIRED IF vector=1 --vec1, vec2-- VECTOR FOR VECTOR PLOT
	648	;
[418]	649	; variables for the vector, vec1 hast to be set to component 1 and
	650	; vec2 to component 2;
[218]	651	; inidcate them with one comma before and after each variable;
[190]	652	;
	653	; data type: string
	654	;
[218]	655	; example: vec1=",u,"
	656	; vec2=",v,"
	657	;
[190]	658	; default: vec1 = "component1", vec2 = "component2"
	659	;***************************************************
	660	if(.not. isvar("vec1"))then
	661
	662	vec1 = "component1"
	663
	664	end if
	665	if (.not. isvar("vec2"))then
	666
	667	vec2 = "component2"
	668
	669	end if
	670	;***************************************************
	671	; OPTIONAL --plotvec-- VARIABLE FOR EXTRA VECTOR PLOT
	672	;
[418]	673	; the vector plot can be combined with other plots of variables;
	674	; if this is desired inidcate the variables,
	675	; where a vector plot shall overlay; inidcate them with one comma
	676	; before and after each variable
[190]	677	;
	678	; data type: string
	679	;
[218]	680	; example: plotvec = ",u,w,"
	681	;
	682	; default: "plotvec" (no combining, the vector plot is created seperately)
[190]	683	;***************************************************
	684	if(.not. isvar("plotvec"))then
	685
	686
	687	plotvec = "plotvec"
	688
	689
	690	end if
	691	;***************************************************
	692	; OPTIONAL --ref_mag-- REFERENCE VECTOR
	693	;
	694	; length of the reference vector in a vector plot
	695	;
	696	; data type: float
	697	;
[218]	698	; example: ref_mag = 0.05
	699	;
[190]	700	; default: 0.05
	701	;***************************************************
	702	if(.not. isvar("ref_mag"))then
	703
	704
	705	ref_mag = 0.05
	706
	707
	708	end if
	709	;***************************************************
[194]	710
[190]	711	end if
	712
	713	;******************************************************
	714	; parameters used by PROFILES
	715	;******************************************************
	716
[194]	717	if (script .EQ. "profiles")then
	718
[190]	719	;***************************************************
[218]	720	; REQUIRED --file_1-- 1ST INPUT FILE
[190]	721	;
[418]	722	; 1st input file produced by PALM; if there is more than one file for
	723	; all timesteps of a job chain, declare path and file name without
	724	; cycle number and ".nc" (first and last cycle numbers are given with
	725	; the parameters 'start_f' and 'end_f');
[218]	726	; otherwise declare path and full file name
[190]	727	;
	728	; data type: string
	729	;
[418]	730	; example: file_1 = "/path_to_file/file_pr"
	731	; if you use more than one cycle number
	732	; file_1 = "/path_to_file/file_pr.4.nc"
	733	; if you use one file (e.g. with cycle number 4)
[218]	734	;
[190]	735	; default: "File in"
	736	;***************************************************
[218]	737	if(.not. isvar("file_1"))then
	738
	739
[267]	740	file_1 = "File in"
[218]	741
	742
	743	end if
	744	;***************************************************
	745	; REQUIRED --start_f_1-- START OF CYCLIC NUMBER OF THE 1ST INPUT FILE
	746	;
[418]	747	; if there is more than one file for all timesteps of a job chain,
	748	; declare the first cyclicnumber which contains timesteps you'd like to use
[218]	749	;
	750	; data type: integer
	751	;
[418]	752	; example: 3 (if first file: example_pr.3.nc) and
	753	; 0 (if first file: example_pr.nc)
[218]	754	;
	755	; default: -1
	756	;***************************************************
	757	if (.not. isvar("start_f_1"))then
[190]	758
[218]	759
	760	start_f_1 = -1
	761
	762
	763	end if
	764	;***************************************************
	765	; REQUIRED --end_f_1-- END OF CYCLIC NUMBER OF THE 1ST INPUT FILE
	766	;
[418]	767	; if there is more than one file for all timesteps of a job chain,
	768	; declare the last cyclicnumber which contains timesteps you'd like to use
[218]	769	;
	770	; data type: integer
	771	;
[418]	772	; example: 48 (if last file: example_pr.48.nc) and
	773	; 0 (if last file: example_pr.nc)
[218]	774	;
	775	; default: -1
	776	;***************************************************
	777	if (.not. isvar("end_f_1"))then
[190]	778
[218]	779
[236]	780	end_f_1 = -1
[190]	781
	782
	783	end if
	784	;***************************************************
	785	; OPTIONAL --format_out-- OUTPUT FORMAT
	786	;
	787	; supported file formats: x11, pdf, ps, eps, epsi or ncgm
	788	;
	789	; data type: string
	790	;
	791	; default: "x11"
	792	;***************************************************
	793	if (.not. isvar("format_out"))then
	794
	795
	796	format_out = "x11"
	797
	798
	799	end if
	800	;***************************************************
	801	; OPTIONAL --file_out-- OUTPUT FILE
	802	;
[218]	803	; declare path and name of the output file
[190]	804	;
	805	; data type: string
	806	;
[194]	807	; default: "~/test_pr"
[190]	808	;***************************************************
	809	if (.not. isvar("file_out"))then
	810
	811
	812	file_out = "~/test_pr"
	813
	814
	815	end if
	816	;***************************************************
[218]	817	; OPTIONAL --no_columns-- NUMBER OF COLUMNS
[190]	818	;
	819	; number of plots in one row
	820	;
	821	; data type: integer
	822	;
	823	; default: 1
	824	;***************************************************
	825	if (.not. isvar("no_columns"))then
	826
	827
	828	no_columns = 1
	829
	830
	831	end if
	832	;***************************************************
[218]	833	; OPTIONAL --no_rows-- NUMBER OF ROWS
[190]	834	;
	835	; number of plots in one column
	836	;
	837	; data type: integer
	838	;
	839	; default: 2
	840	;***************************************************
[218]	841	if (.not. isvar("no_rows"))then
[190]	842
	843
[218]	844	no_rows = 2
[190]	845
	846
	847	end if
	848	;***************************************************
	849	; OPTIONAL --var-- OUTPUT VARIABLES
	850	;
[418]	851	; names of output variables;
	852	; inidcate them with one comma before and after each variable
[190]	853	;
	854	; data type: string
[218]	855	;
[342]	856	; example: var = ",u,v,w,";
[190]	857	;
[218]	858	; default: "all" (all available variables are plotted)
[190]	859	;***************************************************
	860	if (.not. isvar("var"))then
	861
	862
	863	var = "all"
	864
	865
[219]	866	end if
	867	;***************************************************
	868	; OPTIONAL --legend-- SWITCHES ON A LEGEND
	869	;
	870	; a legend is switched on [=1] or off [=0]
	871	;
	872	; data type: integer
	873	;
	874	; example: legend = 1
	875	;
	876	; default: 1
	877	;***************************************************
	878	if (.not. isvar("legend"))then
	879
	880
[236]	881	legend = 1
[219]	882
	883
[190]	884	end if
	885	;***************************************************
	886	; OPTIONAL ---no_files-- NUMBER OF INPUT FILES
	887	;
[418]	888	; up to 6 input files of different runs can be used; all input files
	889	; must contain the same variables and dimensionalties;
[218]	890	; identical variables are merged in one plot;
[190]	891	; combining or overlaying of any variables is not feasible;
[418]	892	; an extra legend (besides the time step legend) is drawn where you
	893	; can explicitily name the items
[190]	894	;
	895	; data type: integer
	896	;
	897	; default: 1
	898	;***************************************************
	899	if (.not. isvar("no_files"))then
	900
	901
	902	no_files = 1
	903
	904
	905	end if
	906	;***************************************************
	907	; OPTIONAL --name_legend_1-- 1st LEGEND ITEM
	908	;
	909	; if no_files > 1: name of 1st item in extra legend
	910	;
	911	; data type: string
	912	;
	913	; default: "File 1"
	914	;***************************************************
	915	if (.not. isvar("name_legend_1"))then
	916
	917
	918	name_legend_1 = "File 1"
	919
	920
[218]	921	end if
[190]	922	;***************************************************
[218]	923	; REQUIRED if no_files > 1 --file_2-- 2ND INPUT FILE
[190]	924	;
[418]	925	; 2nd input file produced by PALM; if there is more than one file
	926	; for all timesteps of a job chain,
	927	; declare path and file name without cycle number and ".nc" (first and
	928	; last cycle numbers are given with the parameters 'start_f' and 'end_f');
[218]	929	; otherwise declare path and full file name
[190]	930	;
	931	; data type: string
	932	;
[418]	933	; example: file_2 = "/path_to_file/file_pr"
	934	; if you use more than one cycle number
	935	; file_2 = "/path_to_file/file_pr.4.nc"
	936	; if you use one file (e.g. with cycle number 4)
[218]	937	;
[190]	938	; default: "File in"
	939	;***************************************************
[218]	940	if(.not. isvar("file_2"))then
	941
	942
	943	file_2 = "File in"
	944
	945
	946	end if
	947	;***************************************************
	948	; REQUIRED --start_f_2-- START OF CYCLIC NUMBER OF THE 2ND INPUT FILE
	949	;
[418]	950	; if there is more than one file for all timesteps of a job chain,
	951	; declare the first cyclicnumber which contains timesteps you'd like to use
[218]	952	;
	953	; data type: integer
	954	;
	955	; example: 3 (if first file: example_ts.3.nc)
	956	;
	957	; default: -1
	958	;***************************************************
	959	if (.not. isvar("start_f_2"))then
[190]	960
	961
[218]	962	start_f_2 = -1
[190]	963
	964
[218]	965	end if
[190]	966	;***************************************************
[218]	967	; REQUIRED --end_f_2-- END OF CYCLIC NUMBER OF THE 2ND INPUT FILE
	968	;
[418]	969	; if there is more than one file for all timesteps of a job chain,
	970	; declare the last cyclicnumber which contains timesteps you'd like to use
[218]	971	;
	972	; data type: integer
	973	;
	974	; example: 48 (if last file: example_ts.48.nc)
	975	;
	976	; default: -1
	977	;***************************************************
	978	if (.not. isvar("end_f_2"))then
	979
	980
	981	end_f_2 = -1
	982
	983
	984	end if
	985	;***************************************************
[190]	986	; OPTIONAL --name_legend_2-- 2nd LEGEND ITEM
	987	;
	988	; if no_files > 1: name of 2nd item in extra legend
	989	;
	990	; data type: string
	991	;
	992	; default: "File 2"
	993	;***************************************************
	994	if (.not. isvar("name_legend_2"))then
	995
	996
	997	name_legend_2 = "File 2"
	998
	999
[218]	1000	end if
[190]	1001	;***************************************************
[218]	1002	; REQUIRED if no_files > 2 --file_3-- 3RD INPUT FILE
[190]	1003	;
[418]	1004	; 3rd input file produced by PALM; if there is more than one file
	1005	; for all timesteps of a job chain,
	1006	; declare path and file name without cycle number and ".nc" (first and
	1007	; last cycle numbers are given with the parameters 'start_f' and 'end_f');
[218]	1008	; otherwise declare path and full file name
[190]	1009	;
	1010	; data type: string
	1011	;
[418]	1012	; example: file_3 = "/path_to_file/file_pr"
	1013	; if you use more than one cycle number
	1014	; file_3 = "/path_to_file/file_pr.4.nc"
	1015	; if you use one file (e.g. with cycle number 4)
[218]	1016	;
[190]	1017	; default: "File in"
	1018	;***************************************************
[218]	1019	if(.not. isvar("file_3"))then
	1020
	1021
	1022	file_3 = "File in"
[190]	1023
	1024
[218]	1025	end if
[190]	1026	;***************************************************
[218]	1027	; REQUIRED --start_f_3-- START OF CYCLIC NUMBER OF THE 3RD INPUT FILE
[190]	1028	;
[418]	1029	; if there is more than one file for all timesteps of a job chain,
	1030	; declare the first cyclicnumber which contains timesteps you'd like to use
[190]	1031	;
[218]	1032	; data type: integer
[190]	1033	;
[218]	1034	; example: 3 (if first file: example_ts.3.nc)
	1035	;
	1036	; default: -1
[190]	1037	;***************************************************
[218]	1038	if (.not. isvar("start_f_3"))then
[190]	1039
[218]	1040
	1041	start_f_3 = -1
[190]	1042
	1043
[218]	1044	end if
[190]	1045	;***************************************************
[218]	1046	; REQUIRED --end_f_3-- END OF CYCLIC NUMBER OF THE 3RD INPUT FILE
[190]	1047	;
[418]	1048	; if there is more than one file for all timesteps of a job chain, declare
	1049	; the last cyclicnumber which contains timesteps you'd like to use
[190]	1050	;
[218]	1051	; data type: integer
[190]	1052	;
[218]	1053	; example: 48 (if last file: example_ts.48.nc)
	1054	;
	1055	; default: -1
[190]	1056	;***************************************************
[218]	1057	if (.not. isvar("end_f_3"))then
[190]	1058
[218]	1059
	1060	end_f_3 = -1
[190]	1061
	1062
[218]	1063	end if
[190]	1064	;***************************************************
[218]	1065	; OPTIONAL --name_legend_3-- 3rd LEGEND ITEM
[190]	1066	;
[218]	1067	; if no_files > 2: name of 3rd item in extra legend
[190]	1068	;
	1069	; data type: string
	1070	;
[218]	1071	; default: "File 3"
[190]	1072	;***************************************************
[218]	1073	if (.not. isvar("name_legend_3"))then
[190]	1074
[218]	1075
	1076	name_legend_3 = "File 3"
[190]	1077
	1078
[218]	1079	end if
[190]	1080	;***************************************************
[218]	1081	; REQUIRED if no_files > 3 --file_4-- 4TH INPUT FILE
[190]	1082	;
[418]	1083	; 4th input file produced by PALM; if there is more than one file for
	1084	; all timesteps of a job chain,
	1085	; declare path and file name without cycle number and ".nc" (first and
	1086	; last cycle numbers are given with the parameters 'start_f' and 'end_f');
[218]	1087	; otherwise declare path and full file name
[190]	1088	;
	1089	; data type: string
	1090	;
[418]	1091	; example: file_4 = "/path_to_file/file_pr"
	1092	; if you use more than one cycle number
	1093	; file_4 = "/path_to_file/file_pr.4.nc"
	1094	; if you use one file (e.g. with cycle number 4)
[218]	1095	;
[190]	1096	; default: "File in"
	1097	;***************************************************
[218]	1098	if(.not. isvar("file_4"))then
	1099
	1100
	1101	file_4 = "File in"
[190]	1102
	1103
[218]	1104	end if
[190]	1105	;***************************************************
[218]	1106	; REQUIRED --start_f_4-- START OF CYCLIC NUMBER OF THE 4TH INPUT FILE
[190]	1107	;
[418]	1108	; if there is more than one file for all timesteps of a job chain,
	1109	; declare the first cyclicnumber which contains timesteps you'd like to use
[190]	1110	;
[218]	1111	; data type: integer
[190]	1112	;
[218]	1113	; example: 3 (if first file: example_ts.3.nc)
	1114	;
	1115	; default: -1
[190]	1116	;***************************************************
[218]	1117	if (.not. isvar("start_f_4"))then
[190]	1118
[218]	1119
	1120	start_f_4 = -1
[190]	1121
	1122
[218]	1123	end if
[190]	1124	;***************************************************
[218]	1125	; REQUIRED --end_f_4-- END OF CYCLIC NUMBER OF THE 4TH INPUT FILE
[190]	1126	;
[418]	1127	; if there is more than one file for all timesteps of a job chain,
	1128	; declare the last cyclicnumber which contains timesteps you'd like to use
[190]	1129	;
[218]	1130	; data type: integer
[190]	1131	;
[218]	1132	; example: 48 (if last file: example_ts.48.nc)
	1133	;
	1134	; default: -1
[190]	1135	;***************************************************
[218]	1136	if (.not. isvar("end_f_4"))then
[190]	1137
[218]	1138
	1139	end_f_4 = -1
[190]	1140
	1141
[218]	1142	end if
[190]	1143	;***************************************************
[218]	1144	; OPTIONAL --name_legend_4-- 4th LEGEND ITEM
[190]	1145	;
[218]	1146	; if no_files > 3: name of 4th item in extra legend
[190]	1147	;
	1148	; data type: string
	1149	;
[218]	1150	; default: "File 4"
[190]	1151	;***************************************************
[218]	1152	if (.not. isvar("name_legend_4"))then
[190]	1153
[218]	1154
	1155	name_legend_4 = "File 4"
[190]	1156
	1157
[218]	1158	end if
[190]	1159	;***************************************************
[218]	1160	; REQUIRED if no_files > 4 --file_5-- 5TH INPUT FILE
[190]	1161	;
[418]	1162	; 5th input file produced by PALM; if there is more than one file for
	1163	; all timesteps of a job chain,
	1164	; declare path and file name without cycle number and ".nc" (first and
	1165	; last cycle numbers are given with the parameters 'start_f' and 'end_f');
[218]	1166	; otherwise declare path and full file name
[190]	1167	;
	1168	; data type: string
	1169	;
[418]	1170	; example: file_5 = "/path_to_file/file_pr"
	1171	; if you use more than one cycle number
	1172	; file_5 = "/path_to_file/file_pr.4.nc"
	1173	; if you use one file (e.g. with cycle number 4)
[218]	1174	;
[190]	1175	; default: "File in"
	1176	;***************************************************
[218]	1177	if(.not. isvar("file_5"))then
	1178
	1179
	1180	file_5 = "File in"
[190]	1181
	1182
[218]	1183	end if
[190]	1184	;***************************************************
[218]	1185	; REQUIRED --start_f_5-- START OF CYCLIC NUMBER OF THE 5TH INPUT FILE
[190]	1186	;
[418]	1187	; if there is more than one file for all timesteps of a job chain,
	1188	; declare the first cyclicnumber which contains timesteps you'd like to use
[190]	1189	;
[218]	1190	; data type: integer
[190]	1191	;
[218]	1192	; example: 3 (if first file: example_ts.3.nc)
	1193	;
	1194	; default: -1
[190]	1195	;***************************************************
[218]	1196	if (.not. isvar("start_f_5"))then
[190]	1197
[218]	1198
	1199	start_f_5 = -1
[190]	1200
	1201
[218]	1202	end if
[190]	1203	;***************************************************
[218]	1204	; REQUIRED --end_f_5-- END OF CYCLIC NUMBER OF THE 5TH INPUT FILE
[190]	1205	;
[418]	1206	; if there is more than one file for all timesteps of a job chain,
	1207	; declare the last cyclicnumber which contains timesteps you'd like to use
[190]	1208	;
[218]	1209	; data type: integer
[190]	1210	;
[218]	1211	; example: 48 (if last file: example_ts.48.nc)
	1212	;
	1213	; default: -1
[190]	1214	;***************************************************
[218]	1215	if (.not. isvar("end_f_5"))then
[190]	1216
[218]	1217
	1218	end_f_5 = -1
[190]	1219
	1220
[218]	1221	end if
[190]	1222	;***************************************************
[218]	1223	; OPTIONAL --name_legend_5-- 5th LEGEND ITEM
[190]	1224	;
[218]	1225	; if no_files > 4: name of 5th item in extra legend
[190]	1226	;
	1227	; data type: string
	1228	;
[218]	1229	; default: "File 5"
[190]	1230	;***************************************************
[218]	1231	if (.not. isvar("name_legend_5"))then
[190]	1232
[218]	1233
	1234	name_legend_5 = "File 5"
[190]	1235
	1236
[218]	1237	end if
[190]	1238	;***************************************************
[218]	1239	; REQUIRED if no_files > 5 --file_6-- 6TH INPUT FILE
[190]	1240	;
[418]	1241	; 6th input file produced by PALM; if there is more than one file for
	1242	; all timesteps of a job chain,
	1243	; declare path and file name without cycle number and ".nc" (first and
	1244	; last cycle numbers are given with the parameters 'start_f' and 'end_f');
[218]	1245	; otherwise declare path and full file name
[190]	1246	;
	1247	; data type: string
	1248	;
[418]	1249	; example: file_6 = "/path_to_file/file_pr"
	1250	; if you use more than one cycle number
	1251	; file_6 = "/path_to_file/file_pr.4.nc"
	1252	; if you use one file (e.g. with cycle number 4)
[218]	1253	;
[190]	1254	; default: "File in"
	1255	;***************************************************
[218]	1256	if(.not. isvar("file_6"))then
	1257
	1258
	1259	file_6 = "File in"
[190]	1260
	1261
[218]	1262	end if
[190]	1263	;***************************************************
[218]	1264	; REQUIRED --start_f_6-- START OF CYCLIC NUMBER OF THE 6TH INPUT FILE
[190]	1265	;
[418]	1266	; if there is more than one file for all timesteps of a job chain,
	1267	; declare the first cyclicnumber which contains timesteps you'd like to use
[190]	1268	;
[218]	1269	; data type: integer
[190]	1270	;
[218]	1271	; example: 3 (if first file: example_ts.3.nc)
	1272	;
	1273	; default: -1
[190]	1274	;***************************************************
[218]	1275	if (.not. isvar("start_f_6"))then
[190]	1276
[218]	1277
	1278	start_f_6 = -1
[190]	1279
	1280
[218]	1281	end if
[190]	1282	;***************************************************
[218]	1283	; REQUIRED --end_f_6-- END OF CYCLIC NUMBER OF THE 6TH INPUT FILE
[190]	1284	;
[418]	1285	; if there is more than one file for all timesteps of a job chain,
	1286	; declare the last cyclicnumber which contains timesteps you'd like to use
[190]	1287	;
[218]	1288	; data type: integer
[190]	1289	;
[218]	1290	; example: 48 (if last file: example_ts.48.nc)
	1291	;
	1292	; default: -1
[190]	1293	;***************************************************
[218]	1294	if (.not. isvar("end_f_6"))then
[190]	1295
[218]	1296
	1297	end_f_6 = -1
[190]	1298
	1299
[218]	1300	end if
[190]	1301	;***************************************************
[218]	1302	; OPTIONAL --name_legend_6-- 6TH LEGEND ITEM
[190]	1303	;
[218]	1304	; if no_files > 5: name of 6th item in extra legend
[190]	1305	;
	1306	; data type: string
	1307	;
[218]	1308	; default: "File 6"
[190]	1309	;***************************************************
[218]	1310	if (.not. isvar("name_legend_6"))then
[190]	1311
[218]	1312
	1313	name_legend_6 = "File 6"
[190]	1314
	1315
[218]	1316	end if
[190]	1317	;***************************************************
[218]	1318	; OPTIONAL --start_time_step-- FIRST TIME STEP
[190]	1319	;
[418]	1320	; first time step of plot; there is no need to specify a precise
	1321	; time value from the input file,
[218]	1322	; 'start_time_step' is rounded to the next existent time step
[190]	1323	;
[218]	1324	; data type: double; dimension: [hour]
[190]	1325	;
[418]	1326	; example: start_time_step = 0.5d
[218]	1327	;
	1328	; default: -1.d (first available time step)
[190]	1329	;***************************************************
[218]	1330	if (.not. isvar("start_time_step"))then
[190]	1331
[218]	1332
	1333	start_time_step = -1.d
[190]	1334
	1335
	1336	end if
	1337	;***************************************************
[218]	1338	; OPTIONAL --end_time_step-- LAST TIME STEP
[190]	1339	;
[418]	1340	; last time step of plot; there is no need to specify a precise
	1341	; time value from the input file,
[218]	1342	; 'end_time_step' is rounded to the next existent time step
[190]	1343	;
[218]	1344	; data type: double; dimension: [hour]
[190]	1345	;
[418]	1346	; example: end_time_step = 2.0d
[218]	1347	;
	1348	; default: -1.d (last available time step)
[190]	1349	;***************************************************
[218]	1350	if (.not. isvar("end_time_step"))then
[190]	1351
[218]	1352
[267]	1353	end_time_step = -1.d
[190]	1354
	1355
[218]	1356	end if
[190]	1357	;***************************************************
[351]	1358	; OPTIONAL --time_stride-- TEMPORAL STRIDE
	1359	;
[418]	1360	; temporal stride for the plots; if time_stride=1 all the profiles
	1361	; between first_time_step and end_time_step are plotted
	1362	; (including first_time_step and end_time_step),
	1363	; if time_stride=3 every third time step between start_time_step and
	1364	; end_time_step is plotted
[351]	1365	;
	1366	; data type: integer
	1367	;
	1368	; example: time_stride = 3
	1369	;
	1370	; default: 1
	1371	;***************************************************
	1372	if (.not. isvar("time_stride"))then
	1373
	1374
	1375	time_stride = 1
	1376
	1377
	1378	end if
	1379	;***************************************************
[218]	1380	; OPTIONAL --start_x-- STARTVALUE IN X-DIRECTION
[190]	1381	;
[418]	1382	; if 3D data is used for profiles you can choose a startvalue
	1383	; in x-direction for horizontal averaging
[190]	1384	;
[218]	1385	; data type: integer; dimension [grippoint]
[190]	1386	;
[218]	1387	; example: start_x = 0
	1388	;
	1389	; default: 0 (minimum of range)
[190]	1390	;***************************************************
[218]	1391	if (.not. isvar("start_x"))then
[190]	1392
[218]	1393
	1394	start_x = 0
[190]	1395
	1396
[218]	1397	end if
[190]	1398	;***************************************************
[218]	1399	; OPTIONAL --end_x-- ENDVALUE IN X-DIRECTION
[190]	1400	;
[418]	1401	; if 3D data is used for profiles you can choose an endvalue
	1402	; in x-direction for horizontal averaging
[190]	1403	;
[218]	1404	; data type: integer; dimension [grippoint]
[190]	1405	;
[218]	1406	; example: end_x = 200
	1407	;
	1408	; default: -1 (maximum of range excluding ghostpoint)
[190]	1409	;***************************************************
[218]	1410	if (.not. isvar("end_x"))then
[190]	1411
[218]	1412
	1413	end_x = -1
[190]	1414
	1415
[218]	1416	end if
[190]	1417	;***************************************************
[218]	1418	; OPTIONAL --start_y-- STARTVALUE IN Y-DIRECTION
[190]	1419	;
[418]	1420	; if 3D data is used for profiles you can choose a startvalue
	1421	; in y-direction for horizontal averaging
[190]	1422	;
[218]	1423	; data type: integer; dimension [grippoint]
[190]	1424	;
[218]	1425	; example: start_y = 0
	1426	;
	1427	; default: 0 (minimum of range)
[190]	1428	;***************************************************
[218]	1429	if (.not. isvar("start_y"))then
[190]	1430
[218]	1431
	1432	start_y = 0
[190]	1433
	1434
[218]	1435	end if
[190]	1436	;***************************************************
[218]	1437	; OPTIONAL --end_y-- ENDVALUE IN Y-DIRECTION
[190]	1438	;
[418]	1439	; if 3D data is used for profiles you can choose an endvalue
	1440	; in y-direction for horizontal averaging
[190]	1441	;
[218]	1442	; data type: integer; dimension [grippoint]
[190]	1443	;
[218]	1444	; example: end_y = 200
	1445	;
	1446	; default: -1 (maximum of range excluding ghostpoint)
[190]	1447	;***************************************************
[218]	1448	if (.not. isvar("end_y"))then
[190]	1449
[218]	1450
	1451	end_y = -1
[190]	1452
	1453
[218]	1454	end if
[190]	1455	;***************************************************
	1456	; OPTIONAL --xs-- MINIMUM X-AXIS
	1457	;
	1458	; value for minimum of x-axis
	1459	;
	1460	; data type: float; dimension of variable
	1461	;
[218]	1462	; example: xs = 300. (e.g. if var=",pt")
	1463	;
[190]	1464	; default: -1. (minimum of range)
	1465	;***************************************************
	1466	if (.not. isvar("xs"))then
	1467
	1468
	1469	xs = -1.
	1470
	1471
	1472	end if
	1473	;***************************************************
	1474	; OPTIONAL --xe-- MAXIMUM X-AXIS
	1475	;
	1476	; value for maximum of x-axis
	1477	;
	1478	; data type: float; dimension of variable
	1479	;
[218]	1480	; example: xe = 302. (e.g. if var=",pt")
	1481	;
[190]	1482	; default: -1. (maximum of range)
	1483	;***************************************************
	1484	if (.not. isvar("xe"))then
	1485
	1486
	1487	xe = -1.
	1488
	1489
	1490	end if
	1491	;***************************************************
	1492	; OPTIONAL --min_z-- MINIMUM Z-AXIS
	1493	;
	1494	; value for minimum height of z-axis
	1495	;
	1496	; data type: double; dimension: [meter]
	1497	;
[418]	1498	; example: min_z = 0.0d
[218]	1499	;
[190]	1500	; default: -1.d (related to the minimum of z-axis in input file)
	1501	;***************************************************
	1502	if (.not. isvar("min_z"))then
	1503
	1504
	1505	min_z = -1.d
	1506
	1507
	1508	end if
	1509	;***************************************************
	1510	; OPTIONAL --max_z-- MAXIMUM Z-AXIS
	1511	;
	1512	; value for maximum height of z-axis
	1513	;
	1514	; data type: double; dimension: [meter]
	1515	;
[418]	1516	; example: max_z = 1000.0d
[218]	1517	;
[190]	1518	; default: -1.d (related to the maximum of z-axis in input file)
	1519	;***************************************************
	1520	if (.not. isvar("max_z"))then
	1521
	1522
	1523	max_z = -1.d
	1524
	1525
	1526	end if
	1527	;***************************************************
[218]	1528	; OPTIONAL --log_z-- LOGARITHMIC SCALE OF Z-AXIS
[190]	1529	;
[218]	1530	; logarithmic scale for z-axis is switched on [=1] or off [=0]
[190]	1531	;
	1532	; data type: integer
	1533	;
[218]	1534	; example: log_z = 0
	1535	;
[190]	1536	; default: 0
	1537	;***************************************************
[218]	1538	if (.not. isvar("log_z"))then
[190]	1539
	1540
[218]	1541	log_z = 0
[190]	1542
	1543
	1544	end if
	1545	;***************************************************
[218]	1546	; OPTIONAL --norm_z-- NORMALISING Z-AXIS
[190]	1547	;
[218]	1548	; value for normalising the z-axis
[190]	1549	;
	1550	; data type: float
	1551	;
[218]	1552	; example: norm_z = 1.
	1553	;
	1554	; default: 1. (no normalising)
[190]	1555	;***************************************************
[218]	1556	if (.not. isvar("norm_z"))then
[190]	1557
	1558
[218]	1559	norm_z = 1.
[190]	1560
	1561
	1562	end if
	1563	;***************************************************
	1564	; OPTIONAL --over-- OVERLAYING
	1565	;
[218]	1566	; predefined overlaying of standard variables is switched on [=1] or off [=0];
[190]	1567	; this feature cannot be used with statistic regions
	1568	;
	1569	; data type: integer
	1570	;
[218]	1571	; example: over = 0
	1572	;
[190]	1573	; default: 0
	1574	;***************************************************
	1575	if (.not. isvar("over"))then
	1576
	1577
	1578	over = 0
	1579
	1580
	1581	end if
	1582	;***************************************************
	1583	; OPTIONAL --combine-- COMBINING
	1584	;
[418]	1585	; combining of two or three individual variables is possible and
	1586	; switched on [=1] or off[=0]
[190]	1587	;
	1588	; data type: integer
	1589	;
[218]	1590	; example: combine = 0
	1591	;
[190]	1592	; default: 0
	1593	;***************************************************
	1594	if (.not. isvar("combine"))then
	1595
	1596
	1597	combine = 0
	1598
	1599
	1600	end if
	1601	;***************************************************
	1602	; REQUIRED IF combine=1 --number_comb-- NUMBER FOR COMBINING
	1603	;
	1604	; number of variables for combining; 2 or 3 is valid
	1605	;
	1606	; data type: integer
	1607	;
[218]	1608	; example: number_comb = 2
	1609	;
[190]	1610	; default: -1
	1611	;***************************************************
	1612	if (.not. isvar("number_comb"))then
	1613
	1614
	1615	number_comb = -1
	1616
	1617
	1618	end if
	1619	;***************************************************
	1620	; REQUIRED IF combine=1 --c_var-- VARIABLES FOR COMBINING
	1621	;
[418]	1622	; names of variables; inidcate them with one comma before and
	1623	; after each variable;
[190]	1624	;
	1625	; data type: string
	1626	;
[218]	1627	; example: c_var = ",u,v,"
	1628	;
[190]	1629	; default: "c_variables"
	1630	;***************************************************
	1631	if (.not. isvar("c_var"))then
	1632
	1633
	1634	c_var = "c_variables"
	1635
	1636
	1637	end if
	1638	;***************************************************
	1639	; OPTIONAL --black-- BLACK OR COLOR LINES
	1640	;
	1641	; colored [=0] or black and white [=1] plots
	1642	;
	1643	; data type: integer
	1644	;
[218]	1645	; example: black = 0
	1646	;
[190]	1647	; default: 0
	1648	;***************************************************
	1649	if (.not. isvar("black"))then
	1650
	1651
	1652	black = 0
	1653
	1654
	1655	end if
	1656	;***************************************************
	1657	; OPTIONAL --dash-- DASHED LINES
	1658	;
[418]	1659	; use of different line patterns [=1] or continous lines [=0]
	1660	; for different time steps
[190]	1661	;
	1662	; data type: integer
	1663	;
[218]	1664	; example: dash = 0
	1665	;
[190]	1666	; default: 0
	1667	;***************************************************
	1668	if (.not. isvar("dash"))then
	1669
	1670
	1671	dash = 0
	1672
	1673
[218]	1674	end if
	1675	;***************************************************
	1676	; OPTIONAL --font_size-- FONT SIZE OF STRINGS
	1677	;
	1678	; font size can be changed to fit to the current plot
	1679	;
	1680	; data type: float
	1681	;
	1682	; example: font_size = 0.02
	1683	;
	1684	; default: 0.02
	1685	;***************************************************
	1686	if(.not. isvar("font_size"))then
	1687
	1688
	1689	font_size = 0.02
	1690
	1691
	1692	end if
	1693	;***************************************************
	1694	; OPTIONAL --font_size_legend-- FONT SIZE OF LEGEND STRINGS
	1695	;
	1696	; font size of the legend can be changed to fit to the current plot
	1697	;
	1698	; data type: float
	1699	;
	1700	; example: font_size_legend = 0.2
	1701	;
	1702	; default: 0.2
	1703	;***************************************************
	1704	if(.not. isvar("font_size_legend"))then
	1705
	1706
	1707	font_size_legend = 0.2
	1708
	1709
[190]	1710	end if
	1711	;***************************************************
	1712
	1713	end if
[194]	1714
[190]	1715	;******************************************************
	1716	; parameters used by SPECTRA
	1717	;******************************************************
	1718
[194]	1719	if (script .EQ. "spectra") then
	1720
[190]	1721	;***************************************************
	1722	; REQUIRED --file_1-- INPUT FILE
	1723	;
[418]	1724	; input file produced by PALM; if there is more than one file for
	1725	; all timesteps of a job chain,
	1726	; declare path and file name without cycle number and ".nc" (first and
	1727	; last cycle numbers are given with the parameters 'start_f' and 'end_f');
[218]	1728	; otherwise declare path and full file name
[190]	1729	;
	1730	; data type: string
	1731	;
[418]	1732	; example: file_1 = "/path_to_file/file_sp"
	1733	; if you use more than one cycle number
	1734	; file_1 = "/path_to_file/file_sp.4.nc"
	1735	; if you use one file (e.g. with cycle number 4)
[218]	1736	;
[190]	1737	; default: "File in"
	1738	;***************************************************
[218]	1739	if(.not. isvar("file_1"))then
	1740
	1741
	1742	file_1 = "File in"
	1743
	1744
	1745	end if
	1746	;***************************************************
[418]	1747	; REQUIRED if more than one file of a job chain
	1748	; --start_f-- START OF CYCLIC NUMBER
[218]	1749	;
[418]	1750	; if there is more than one file for all timesteps of a job chain,
	1751	; declare the first cyclicnumber which contains timesteps you'd like to use
[218]	1752	;
	1753	; data type: integer
	1754	;
[418]	1755	; example: start_f = 3 (if first file: example_sp.3.nc) and
	1756	; start_f = 0 (if first file: example_sp.nc)
[218]	1757	;
	1758	; default: -1
	1759	;***************************************************
	1760	if (.not. isvar("start_f"))then
[190]	1761
	1762
[218]	1763	start_f = -1
[190]	1764
	1765
[218]	1766	end if
[190]	1767	;***************************************************
[418]	1768	; REQUIRED if more than one file of a job chain
	1769	; --end_f-- END OF CYCLIC NUMBER
[218]	1770	;
[418]	1771	; if there is more than one file for all timesteps of a job chain,
	1772	; declare the last cyclicnumber which contains timesteps you'd like to use
[218]	1773	;
	1774	; data type: integer
	1775	;
[418]	1776	; example: end_f = 48 (if last file: example_sp.48.nc) and
	1777	; end_f = 0 (if last file: example_sp.nc)
[218]	1778	;
	1779	; default: -1
	1780	;***************************************************
	1781	if (.not. isvar("end_f"))then
	1782
	1783
	1784	end_f = -1
	1785
	1786
	1787	end if
	1788	;***************************************************
[190]	1789	; OPTIONAL --format_out-- OUTPUT FORMAT
	1790	;
[418]	1791	; format of the output file;
	1792	; supported file formats: x11, pdf, ps, eps, epsi or ncgm
[190]	1793	;
	1794	; data type: string
	1795	;
[218]	1796	; example: format_out = "pdf"
	1797	;
[190]	1798	; default: "x11"
	1799	;***************************************************
	1800	if (.not. isvar("format_out"))then
	1801
	1802
	1803	format_out = "x11"
	1804
	1805
	1806	end if
	1807	;***************************************************
	1808	; OPTIONAL --file_out-- OUTPUT FILE
	1809	;
[218]	1810	; path and name of the output file
[190]	1811	;
	1812	; data type: string
	1813	;
[218]	1814	; example: file_out = "/home/path_to_output/test_sp"
	1815	;
[194]	1816	; default: "~/test_sp"
[190]	1817	;***************************************************
	1818	if (.not. isvar("file_out"))then
	1819
	1820
	1821	file_out = "~/test_sp"
	1822
	1823
	1824	end if
	1825	;***************************************************
[218]	1826	; OPTIONAL --no_columns-- NUMBER OF COLUMNS
[190]	1827	;
	1828	; number of plots in one row
	1829	;
	1830	; data type: integer
[218]	1831	;
	1832	; example: no_columns = 1
[190]	1833	;
	1834	; default: 1
	1835	;***************************************************
	1836	if (.not. isvar("no_columns"))then
	1837
	1838
	1839	no_columns = 1
	1840
	1841
	1842	end if
	1843	;***************************************************
[218]	1844	; OPTIONAL --no_rows-- NUMBER OF ROWS
[190]	1845	;
	1846	; number of plots in one column
	1847	;
	1848	; data type: integer
[218]	1849	;
	1850	; example: no_rows = 2
[190]	1851	;
	1852	; default: 2
	1853	;***************************************************
[218]	1854	if (.not. isvar("no_rows"))then
[190]	1855
	1856
[218]	1857	no_rows = 2
[190]	1858
	1859
	1860	end if
	1861	;***************************************************
	1862	; OPTIONAL --var-- OUTPUT VARIABLES
	1863	;
[418]	1864	; names of output variables; inidcate them with one comma before
	1865	; and after each variable
[190]	1866	;
	1867	; data type: string
[218]	1868	;
[342]	1869	; example: var = ",u,v,w,"
[190]	1870	;
[218]	1871	; default: "all" (all available variables are plotted)
[190]	1872	;***************************************************
	1873	if (.not. isvar("var"))then
	1874
	1875
	1876	var = "all"
	1877
	1878
	1879	end if
	1880	;***************************************************
	1881	; OPTIONAL --height_level-- HEIGHT LEVELS
	1882	;
[418]	1883	; defines if all levels or selected levels are output;
	1884	; a 1D array with up to 100 elements
[218]	1885	; from 0 to 99 must be indicated
[190]	1886	;
	1887	; data type: integer array
	1888	;
[218]	1889	; example: height_level=(/0,3,7/)
	1890	;
	1891	; default: (/-1/) (all levels are output)
[190]	1892	;***************************************************
	1893	if (.not. isvar("height_level"))then
	1894
	1895
	1896	height_level = (/-1/)
	1897
	1898
	1899	end if
	1900	;***************************************************
	1901	; OPTIONAL --sort-- TYPE OF SORTING
	1902	;
[418]	1903	; defines if all heights [="height"] or all timesteps [="time"]
	1904	; are merged in one plot
[190]	1905	;
	1906	; data type: string
	1907	;
[218]	1908	; example: sort = "height"
	1909	;
[190]	1910	; default: "height"
	1911	;***************************************************
	1912	if (.not. isvar("sort"))then
	1913
	1914
	1915	sort = "height"
	1916
	1917
	1918	end if
	1919	;***************************************************
	1920	; OPTIONAL --start_time_step-- FIRST TIME STEP
	1921	;
[418]	1922	; first time step of plot; there is no need to specify a precise
	1923	; time value from the input file,
[218]	1924	; 'start_time_step' is rounded to the next existent time step
[190]	1925	;
	1926	; data type: double; dimension: [hour]
	1927	;
[418]	1928	; example: start_time_step = 0.5d
[218]	1929	;
[190]	1930	; default: -1.d (first available time step)
	1931	;***************************************************
	1932	if (.not. isvar("start_time_step"))then
	1933
	1934
	1935	start_time_step = -1.d
	1936
	1937
	1938	end if
	1939	;***************************************************
	1940	; OPTIONAL --end_time_step-- LAST TIME STEP
	1941	;
[418]	1942	; last time step of plot; there is no need to specify a precise
	1943	; time value from the input file,
[218]	1944	; 'end_time_step' is rounded to the next existent time step
[190]	1945	;
	1946	; data type: double; dimension: [hour]
	1947	;
[418]	1948	; example: end_time_step = 2.0d
[218]	1949	;
[190]	1950	; default: -1.d (last available time step)
	1951	;***************************************************
	1952	if (.not. isvar("end_time_step"))then
	1953
	1954
	1955	end_time_step = -1.d
	1956
	1957
	1958	end if
	1959	;***************************************************
	1960	; OPTIONAL --black-- BLACK OR COLOR LINES
	1961	;
	1962	; colored [=0] or black and white [=1] plots
	1963	;
	1964	; data type: integer
	1965	;
[218]	1966	; example: black = 0
	1967	;
[190]	1968	; default: 0
	1969	;***************************************************
	1970	if (.not. isvar("black"))then
	1971
	1972
	1973	black = 0
	1974
	1975
	1976	end if
	1977	;***************************************************
	1978	; OPTIONAL --dash-- DASHED LINES
	1979	;
	1980	; use of different line patterns [=1] or continous lines [=0]
	1981	;
	1982	; data type: integer
	1983	;
[218]	1984	; example: dash = 0
	1985	;
[190]	1986	; default: 0
	1987	;***************************************************
	1988	if (.not. isvar("dash"))then
	1989
	1990
	1991	dash = 0
	1992
	1993
	1994	end if
	1995	;***************************************************
[218]	1996	; OPTIONAL --log_x-- LOGARITHMIC SCALE X-AXIS
[190]	1997	;
[218]	1998	; logarithmic scale for x-axis is switched on [=1] or off [=0]
[190]	1999	;
	2000	; data type: integer
	2001	;
[218]	2002	; example: log_x = 1
	2003	;
[190]	2004	; default: 1
	2005	;***************************************************
[218]	2006	if (.not. isvar("log_x"))then
[190]	2007
	2008
[218]	2009	log_x = 1
[190]	2010
	2011
	2012	end if
	2013	;***************************************************
[218]	2014	; OPTIONAL --log_y-- LOGARITHMIC SCALE Y-AXIS
[190]	2015	;
[218]	2016	; logarithmic scale for y-axis is switched on [=1] or off [=0]
[190]	2017	;
	2018	; data type: integer
	2019	;
[218]	2020	; example: log_y = 1
	2021	;
[190]	2022	; default: 1
	2023	;***************************************************
[218]	2024	if (.not. isvar("log_y"))then
[190]	2025
	2026
[218]	2027	log_y = 1
[190]	2028
	2029
	2030	end if
	2031	;***************************************************
[218]	2032	; OPTIONAL --norm_x-- NORMALISING X-AXIS
[190]	2033	;
	2034	; value for normalising the x-axis
	2035	;
	2036	; data type: float
	2037	;
[218]	2038	; example: norm_x = 1
	2039	;
[190]	2040	; default: 1. (no normalising)
	2041	;***************************************************
[218]	2042	if (.not. isvar("norm_x"))then
[190]	2043
	2044
[218]	2045	norm_x = 1.
[190]	2046
	2047
[218]	2048	end if
	2049	;***************************************************
	2050	; OPTIONAL --norm_height-- NORMALISING X-AXIS WITH HEIGHT
	2051	;
[418]	2052	; normalising the x-axis with the height of each spectra
	2053	; is switched on [=1] or off [=0]
[218]	2054	;
	2055	; data type: integer
	2056	;
	2057	; example: norm_height = 0
	2058	;
	2059	; default: 0 (no normalising)
	2060	;***************************************************
	2061	if (.not. isvar("norm_height"))then
	2062
	2063
	2064	norm_height = 0
	2065
	2066
[190]	2067	end if
	2068	;***************************************************
[218]	2069	; OPTIONAL --norm_y-- NORMALISE Y-AXIS
[190]	2070	;
	2071	; value for normalising the y-axis
	2072	;
	2073	; data type: float
	2074	;
[218]	2075	; example: norm_y = 1.
	2076	;
[190]	2077	; default: 1. (no normalising)
	2078	;***************************************************
[218]	2079	if (.not. isvar("norm_y"))then
[190]	2080
	2081
[218]	2082	norm_y = 1.
[190]	2083
	2084
[218]	2085	end if
[190]	2086	;***************************************************
[218]	2087	; OPTIONAL --unit_x--unit_y-- UNITS OF X-, Y-AXES
	2088	;
	2089	; unit of the x-axis can be set if norm_x is unequal 1, otherwise the unit is [1/m]; by default no unit is set for the y-axis
	2090	;
	2091	; data type: string,
	2092	;
	2093	; example: unit_x = "100/m"
	2094	;
	2095	; default: " "
	2096	;***************************************************
	2097	if(.not. isvar("unit_x"))then
	2098
	2099	unit_x = " "
	2100
	2101	end if
	2102	if(.not. isvar("unit_y"))then
	2103
	2104	unit_y = " "
	2105
	2106	end if
	2107	;***************************************************
	2108	; OPTIONAL --font_size-- FONT SIZE OF STRINGS
	2109	;
	2110	; font size can be changed to fit to the current plot
	2111	;
	2112	; data type: float
	2113	;
	2114	; example: font_size = 0.02
	2115	;
	2116	; default: 0.02
	2117	;***************************************************
	2118	if(.not. isvar("font_size"))then
	2119
	2120
	2121	font_size = 0.02
	2122
	2123
	2124	end if
	2125	;***************************************************
	2126	; OPTIONAL --font_size_legend-- FONT SIZE OF LEGEND STRINGS
	2127	;
	2128	; font size of the legend can be changed to fit to the current plot
	2129	;
	2130	; data type: float
	2131	;
	2132	; example: font_size_legend = 0.2
	2133	;
	2134	; default: 0.2
	2135	;***************************************************
	2136	if(.not. isvar("font_size_legend"))then
	2137
	2138
	2139	font_size_legend = 0.2
	2140
	2141
	2142	end if
	2143	;***************************************************
[190]	2144
	2145	end if
[194]	2146
[190]	2147	;******************************************************
	2148	; parameters used by TIMESERIES
	2149	;******************************************************
	2150
[194]	2151	if (script .EQ. "timeseries") then
	2152
[190]	2153	;***************************************************
	2154	; REQUIRED --file_1-- INPUT FILE
	2155	;
[418]	2156	; input file produced by PALM; if there is more than one file for
	2157	; all timesteps of a job chain,
	2158	; declare path and file name without cycle number and ".nc" (first and
	2159	; last cycle numbers are given with the parameters 'start_f' and 'end_f');
[218]	2160	; otherwise declare path and full file name
[190]	2161	;
	2162	; data type: string
	2163	;
[418]	2164	; example: file_1 = "/path_to_file/file_ts"
	2165	; if you use more than one cycle number
	2166	; file_1 = "/path_to_file/file_ts.4.nc"
	2167	; if you use one file (e.g. with cycle number 4)
[218]	2168	;
[190]	2169	; default: "File in"
	2170	;***************************************************
[218]	2171	if(.not. isvar("file_1"))then
	2172
	2173
[267]	2174	file_1 = "File in"
[218]	2175
	2176
	2177	end if
	2178	;***************************************************
[418]	2179	; REQUIRED if more than one file of a job chain
	2180	; --start_f-- START OF CYCLIC NUMBER
[218]	2181	;
[418]	2182	; if there is more than one file for all timesteps of a job chain,
	2183	; declare the first cyclicnumber which contains timesteps you'd like to use
[218]	2184	;
	2185	; data type: integer
	2186	;
[418]	2187	; example: start_f = 3 (if first file: example_ts.3.nc) and
	2188	; start_f = 0 (if first file: example_ts.nc)
[218]	2189	;
	2190	; default: -1
	2191	;***************************************************
	2192	if (.not. isvar("start_f"))then
[190]	2193
	2194
[218]	2195	start_f = -1
[190]	2196
	2197
[218]	2198	end if
[190]	2199	;***************************************************
[418]	2200	; REQUIRED if more than one file of a job chain
	2201	; --end_f-- END OF CYCLIC NUMBER
[218]	2202	;
[418]	2203	; if there is more than one file for all timesteps of a job chain,
	2204	; declare the last cyclicnumber which contains timesteps you'd like to use
[218]	2205	;
	2206	; data type: integer
	2207	;
[418]	2208	; example: end_f = 48 (if last file: example_ts.48.nc) and
	2209	; end_f = 0 (if last file: example_ts.nc)
[218]	2210	;
	2211	; default: -1
	2212	;***************************************************
	2213	if (.not. isvar("end_f"))then
	2214
	2215
	2216	end_f = -1
	2217
	2218
	2219	end if
	2220	;***************************************************
[190]	2221	; OPTIONAL --format_out-- OUTPUT FORMAT
	2222	;
[418]	2223	; format of the output file;
	2224	; supported file formats: x11, pdf, ps, eps, epsi or ncgm
[190]	2225	;
	2226	; data type: string
	2227	;
[218]	2228	; example: format_out = "pdf"
	2229	;
[190]	2230	; default: "x11"
	2231	;***************************************************
	2232	if (.not. isvar("format_out"))then
	2233
	2234
	2235	format_out = "x11"
	2236
	2237
	2238	end if
	2239	;***************************************************
	2240	; OPTIONAL --file_out-- OUTPUT FILE
	2241	;
[218]	2242	; path and name of the output file
[190]	2243	;
	2244	; data type: string
	2245	;
[218]	2246	; example: file_out = "/home/path_to_output/test_ts"
	2247	;
[194]	2248	; default: "~/test_ts"
[190]	2249	;***************************************************
	2250	if (.not. isvar("file_out"))then
	2251
	2252
	2253	file_out = "~/test_ts"
	2254
	2255
	2256	end if
	2257	;***************************************************
[218]	2258	; OPTIONAL --no_columns-- NUMBER OF COLUMNS
[190]	2259	;
	2260	; number of plots in one row
	2261	;
	2262	; data type: integer
[218]	2263	;
	2264	; example: no_columns = 1
[190]	2265	;
	2266	; default: 1
	2267	;***************************************************
	2268	if (.not. isvar("no_columns"))then
	2269
	2270
	2271	no_columns = 1
	2272
	2273
	2274	end if
	2275	;***************************************************
[218]	2276	; OPTIONAL --no_rows-- NUMBER OF ROWS
[190]	2277	;
	2278	; number of plots in one column
	2279	;
	2280	; data type: integer
[218]	2281	;
	2282	; example: no_rows = 2
[190]	2283	;
	2284	; default: 2
	2285	;***************************************************
[218]	2286	if (.not. isvar("no_rows"))then
[190]	2287
	2288
[267]	2289	no_rows = 1
[190]	2290
	2291
	2292	end if
	2293	;***************************************************
	2294	; OPTIONAL --var-- OUTPUT VARIABLES
	2295	;
[418]	2296	; names of output variables; inidcate them with one comma before
	2297	; and after each variable
[190]	2298	;
	2299	; data type: string
[218]	2300	;
[342]	2301	; example: var = ",u,v,w,"
[190]	2302	;
[218]	2303	; default: "all" (all available variables are plotted)
[190]	2304	;***************************************************
	2305	if (.not. isvar("var"))then
	2306
	2307
	2308	var = "all"
	2309
	2310
	2311	end if
	2312	;***************************************************
	2313	; OPTIONAL --start_time_step-- FIRST TIME STEP
	2314	;
[418]	2315	; first time step of plot; there is no need to specify a precise
	2316	; time value from the input file,
[218]	2317	; 'start_time_step' is rounded to the next existent time step
[190]	2318	;
	2319	; data type: double; dimension: [hour]
	2320	;
[418]	2321	; example: start_time_step = 0.5d
[218]	2322	;
[190]	2323	; default: -1.d (first available time step)
	2324	;***************************************************
	2325	if (.not. isvar("start_time_step"))then
	2326
	2327
	2328	start_time_step = -1.d
	2329
	2330
	2331	end if
	2332	;***************************************************
	2333	; OPTIONAL --end_time_step-- LAST TIME STEP
	2334	;
[418]	2335	; last time step of plot; there is no need to specify a precise
	2336	; time value from the input file,
[218]	2337	; 'end_time_step' is rounded to the next existent time step
[190]	2338	;
	2339	; data type: double; dimension: [hour]
	2340	;
[418]	2341	; example: end_time_step = 2.0d
[218]	2342	;
[190]	2343	; default: -1.d (last available time step)
	2344	;***************************************************
	2345	if (.not. isvar("end_time_step"))then
	2346
	2347
	2348	end_time_step = -1.d
	2349
[267]	2350
[190]	2351	end if
	2352	;***************************************************
	2353	; OPTIONAL --over-- OVERLAYING
	2354	;
[218]	2355	; predefined overlaying of standard variables are switched on [=1] or off [=0];
[190]	2356	; this feature cannot be used with statistic regions
	2357	;
	2358	; data type: integer
	2359	;
[218]	2360	; example: over = 0
	2361	;
[190]	2362	; default: 0
	2363	;***************************************************
	2364	if (.not. isvar("over"))then
	2365
	2366
	2367	over = 0
	2368
	2369
[218]	2370	end if
	2371	;***************************************************
	2372	; OPTIONAL --font_size-- FONT SIZE OF STRINGS
	2373	;
	2374	; font size can be changed to fit to the current plot
	2375	;
	2376	; data type: float
	2377	;
	2378	; example: font_size = 0.07
	2379	;
	2380	; default: 0.07
	2381	;***************************************************
	2382	if(.not. isvar("font_size"))then
	2383
	2384
	2385	font_size = 0.07
	2386
	2387
[190]	2388	end if
	2389	;***************************************************
[218]	2390	; OPTIONAL --norm_t-- NORMALISING X-AXIS OF TIMESERIES PLOTS (T-AXIS)
	2391	;
[418]	2392	; normalising the x-axis with the given value; the unit can explicitly set;
	2393	; by default no normalising and unit is set to [s]
[218]	2394	;
	2395	; data type: float
	2396	;
[418]	2397	; example: norm_t = 3600.
[218]	2398	;
	2399	; default: 1.
	2400	;***************************************************
	2401	if(.not. isvar("normt"))then
	2402
	2403
	2404	norm_t = 1.
	2405
	2406
	2407	end if
	2408	;***************************************************
	2409	; OPTIONAL --unit_t-- UNIT OF X-AXIS OF TIMESERIES PLOTS (T-AXIS)
	2410	;
	2411	; unit of the x-axis can be set; by default unit is set to [s]
	2412	;
	2413	; data type: string
	2414	;
	2415	; example: unit_t = "h"
	2416	;
	2417	; default: " "
	2418	;***************************************************
	2419	if(.not. isvar("unitt"))then
	2420
	2421
	2422	unit_t = " "
	2423
	2424
	2425	end if
	2426	;***************************************************
[190]	2427
	2428	end if
	2429
	2430	;*********************************************************
	2431
	2432	end

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format