| [2488] | 1 | !------------------------------------------------------------------------------- |
|---|
| 2 | !-- INITIALIZATION PARAMETER NAMELIST |
|---|
| 3 | ! Documentation: https://palm.muk.uni-hannover.de/trac/wiki/doc/app/inipar |
|---|
| 4 | !------------------------------------------------------------------------------- |
|---|
| [3045] | 5 | &initialization_parameters |
|---|
| [2488] | 6 | ! |
|---|
| 7 | !-- grid parameters |
|---|
| 8 | !------------------------------------------------------------------------------- |
|---|
| 9 | nx = 39, ! Number of gridboxes in x-direction (nx+1) |
|---|
| 10 | ny = 39, ! Number of gridboxes in y-direction (ny+1) |
|---|
| 11 | nz = 40, ! Number of gridboxes in z-direction (nz) |
|---|
| [6] | 12 | |
|---|
| [2488] | 13 | dx = 50.0, ! Size of single gridbox in x-direction |
|---|
| 14 | dy = 50.0, ! Size of single gridbox in y-direction |
|---|
| 15 | dz = 50.0, ! Size of single gridbox in z-direction |
|---|
| [6] | 16 | |
|---|
| [3068] | 17 | dz_stretch_level = 1225.0, ! Height (in m) where stretching starts |
|---|
| [2488] | 18 | dz_stretch_factor = 1.08, ! dz(k+1) = dz(k) * dz_stretch_factor |
|---|
| 19 | ! |
|---|
| 20 | !-- initialization |
|---|
| 21 | !------------------------------------------------------------------------------- |
|---|
| 22 | initializing_actions = 'set_constant_profiles', ! initial conditions |
|---|
| [6] | 23 | |
|---|
| [2488] | 24 | ug_surface = 0.0, ! u-comp of geostrophic wind at surface |
|---|
| 25 | vg_surface = 0.0, ! v-comp of geostrophic wind at surface |
|---|
| [6] | 26 | |
|---|
| [2488] | 27 | pt_surface = 300.0, ! initial surface potential temp |
|---|
| [6] | 28 | |
|---|
| [2490] | 29 | pt_vertical_gradient = 0.0, |
|---|
| 30 | 1.0, ! piecewise temp gradients |
|---|
| 31 | pt_vertical_gradient_level = 0.0, |
|---|
| 32 | 800.0, ! height level of temp gradients |
|---|
| [6] | 33 | |
|---|
| 34 | |
|---|
| [2488] | 35 | ! |
|---|
| 36 | !-- boundary conditions |
|---|
| 37 | !------------------------------------------------------------------------------- |
|---|
| 38 | surface_heatflux = 0.1, ! sensible heat flux at the bottom surface |
|---|
| 39 | bc_pt_b = 'neumann', ! required with surface_heatflux |
|---|
| 40 | ! |
|---|
| 41 | !-- numerics |
|---|
| 42 | !------------------------------------------------------------------------------- |
|---|
| 43 | fft_method = 'temperton-algorithm', ! build-in fft method |
|---|
| [6] | 44 | |
|---|
| [2488] | 45 | / ! end of initialization parameter namelist |
|---|
| [6] | 46 | |
|---|
| [2488] | 47 | !------------------------------------------------------------------------------- |
|---|
| 48 | !-- RUNTIME PARAMETER NAMELIST |
|---|
| 49 | ! Documentation: https://palm.muk.uni-hannover.de/trac/wiki/doc/app/d3par |
|---|
| 50 | !------------------------------------------------------------------------------- |
|---|
| [3045] | 51 | &runtime_parameters |
|---|
| [2488] | 52 | ! |
|---|
| 53 | !-- run steering |
|---|
| 54 | !------------------------------------------------------------------------------- |
|---|
| 55 | end_time = 3600.0, ! simulation time of the 3D model |
|---|
| [6] | 56 | |
|---|
| [2488] | 57 | create_disturbances = .TRUE., ! randomly perturbate horiz. velocity |
|---|
| 58 | dt_disturb = 150.0, ! interval for random perturbations |
|---|
| 59 | disturbance_energy_limit = 0.01, ! upper limit for perturbation energy |
|---|
| [6] | 60 | |
|---|
| [2488] | 61 | data_output_2d_on_each_pe = .FALSE., ! don't do 2D output on each MPI rank |
|---|
| [6] | 62 | |
|---|
| [2488] | 63 | ! |
|---|
| 64 | !-- data output |
|---|
| 65 | !------------------------------------------------------------------------------- |
|---|
| 66 | netcdf_data_format = 2, ! use NetCDF3 |
|---|
| [6] | 67 | |
|---|
| [2488] | 68 | dt_run_control = 0.0, ! output interval for run control |
|---|
| 69 | dt_data_output = 900.0, ! output interval for general data |
|---|
| 70 | dt_data_output_av = 1800.0, ! output interval for averaged data |
|---|
| 71 | dt_dopr = 900.0, ! output interval for profile data |
|---|
| [6] | 72 | |
|---|
| [2488] | 73 | data_output = 'w_xy', 'w_xz', 'w_xz_av', |
|---|
| 74 | 'pt_xy', 'pt_xz', |
|---|
| 75 | |
|---|
| 76 | data_output_pr = 'wpt', 'w"pt"', 'w*pt*', |
|---|
| 77 | 'w*2', |
|---|
| 78 | '#pt', 'pt*2', |
|---|
| 79 | |
|---|
| [2490] | 80 | section_xy = 2, |
|---|
| 81 | 10, ! grid index for 2D XY cross sections |
|---|
| [2488] | 82 | section_xz = 20, ! grid index for 2D XZ cross sections |
|---|
| 83 | |
|---|
| 84 | averaging_interval = 900.0, ! averaging interval general data |
|---|
| 85 | dt_averaging_input = 10.0, ! averaging general data sampling rate |
|---|
| 86 | |
|---|
| 87 | averaging_interval_pr = 600.0, ! averaging interval profile data |
|---|
| 88 | dt_averaging_input_pr = 10.0, ! averaging profile data sampling rate |
|---|
| 89 | |
|---|
| 90 | / ! end of runtime parameter namelist |
|---|
| 91 | |
|---|
