| 1 | example_wtm |
|---|
| 2 | |
|---|
| 3 | 1. Purpose |
|---|
| 4 | This example shows the application of enhanced actuator disc wind turbine models in PALM |
|---|
| 5 | The model is based on blade elements and conversion of airfoil lift |
|---|
| 6 | and drag coefficients from the NREL 5MW reference turbine (see Jonkman et al. 2009: |
|---|
| 7 | Technical Report NREL/TP-500-38060, doi:10.2172/947422) to local forces on the flow. |
|---|
| 8 | The example simulates 4 different turbines in laminar flow that correct their orientation |
|---|
| 9 | after 30s of simulated time by use of a yaw controller. |
|---|
| 10 | |
|---|
| 11 | 2. PALM-Version / SVN Revision |
|---|
| 12 | PALM 4.0 / SVN Revision 1912 |
|---|
| 13 | |
|---|
| 14 | 3. Required user code |
|---|
| 15 | No user code is required |
|---|
| 16 | |
|---|
| 17 | 4. Input: |
|---|
| 18 | example_wtm_p3d: Cyclic lateral boundary conditions are used. The 3d-model is initialized with |
|---|
| 19 | constant temperature and constant laminar flow. |
|---|
| 20 | example_wtm_wtm: The property file of the NREL 5MW model turbine has also to be copied to the |
|---|
| 21 | local INPUT folder, it will be automatically read by PALM |
|---|
| 22 | |
|---|
| 23 | 5. Preprocessing |
|---|
| 24 | No preprocessing is required. |
|---|
| 25 | |
|---|
| 26 | 6. Program start |
|---|
| 27 | Modifications to .mrun.config: |
|---|
| 28 | If you don't use the default .mrun.config-files in trunk/SCRIPTS/ you will have to add the |
|---|
| 29 | following lines in your .mrun.config file: |
|---|
| 30 | In "List of input-files": |
|---|
| 31 | WTM_DATA in:locopt d3#:d3f $base_data/$fname/INPUT _wtm |
|---|
| 32 | In "List of output-files": |
|---|
| 33 | TURBINE_PARAMETERS01 out:loc:tr d3#:d3f $base_data/$fname/MONITORING _turbine_parameters01 |
|---|
| 34 | TURBINE_PARAMETERS02 out:loc:tr d3#:d3f $base_data/$fname/MONITORING _turbine_parameters02 |
|---|
| 35 | TURBINE_PARAMETERS03 out:loc:tr d3#:d3f $base_data/$fname/MONITORING _turbine_parameters03 |
|---|
| 36 | TURBINE_PARAMETERS04 out:loc:tr d3#:d3f $base_data/$fname/MONITORING _turbine_parameters04 |
|---|
| 37 | |
|---|
| 38 | mrun call (example for lccrayh): |
|---|
| 39 | mrun -d example_wtm -h lccrayh -K parallel -X 64 -T 24 -t 2000 -q mpp1testq -r "d3# ts# ma#" |
|---|
| 40 | |
|---|
| 41 | 7. Monitoring: |
|---|
| 42 | example_wtm_rc and TURBINE_PARAMETERS01 should be equal to the attached files when run at |
|---|
| 43 | Cray System of HLRN Berlin. For other systems the deviations should be small. |
|---|
| 44 | |
|---|
| 45 | 8. Postprocessing |
|---|
| 46 | No postprocessing of the data is required. |
|---|
| 47 | |
|---|
| 48 | 9. List of attachments |
|---|
| 49 | example_wtm_p3d |
|---|
| 50 | example_wtm_wtm |
|---|
| 51 | lccrayb_example_wtm_rc |
|---|
| 52 | lccrayb_example_wtm_turbine_parameters01 |
|---|
