1 | List of message identifiers used in PALM message handling routine "message" |
---|
2 | |
---|
3 | PA**** Identifier for messages in the PALM standard code |
---|
4 | UI**** Identifier for messages in "user_" routines |
---|
5 | NC**** Identifier for messages from the NetCDF library |
---|
6 | |
---|
7 | message_identifier message string |
---|
8 | PA0001 "host" is not set. Please check that environment |
---|
9 | variable "localhost" is set before running PALM |
---|
10 | PA0002 illegal coupling mode: ... |
---|
11 | PA0003 dt_coupling is not set but required for coupling |
---|
12 | mode "..." |
---|
13 | PA0004 coupling mode "...": dt_coupling = ... is not equal |
---|
14 | to dt_coupling_remote = ... |
---|
15 | PA0005 coupling mode "...": dt_coupling <= 0.0 is not allowed |
---|
16 | and is reset to MAX(dt_max(A,O)) = ... |
---|
17 | PA0006 coupling mode "...": restart_time = ... is not equal |
---|
18 | to restart_time_remote = ... |
---|
19 | PA0007 coupling mode "...": dt_restart = ... is not equal |
---|
20 | to dt_restart_remote = ... |
---|
21 | PA0008 coupling mode "...": simulation_time_since_reference = |
---|
22 | ... is not equal to |
---|
23 | simulation_time_since_reference_remote = ... |
---|
24 | PA0009 coupling mode "...": dx = ... is not equal to |
---|
25 | dx_remote = ... |
---|
26 | PA0010 coupling mode "...": dy = ... is not equal to |
---|
27 | dy_remote = ... |
---|
28 | PA0011 coupling mode "...": nx = ... is not equal to |
---|
29 | nx_remote = ... |
---|
30 | PA0012 coupling mode "...": ny = ... is not equal to |
---|
31 | ny_remote = ... |
---|
32 | PA0013 illegal value given for loop_optimization: "..." |
---|
33 | PA0014 a non-flat topography does not allow ... |
---|
34 | PA0015 ocean = .T. does not allow ... |
---|
35 | PA0016 unknown solver for perturbation pressure: |
---|
36 | psolver = "..." |
---|
37 | PA0017 psolver = "..." only works for a |
---|
38 | 1d domain-decomposition along x |
---|
39 | please do not set npey/=1 in the parameter file' |
---|
40 | PA0018 psolver = ".." does not work for subdomains with |
---|
41 | unequal size please set grid_matching = ''strict'' |
---|
42 | in the parameter file |
---|
43 | PA0019 psolver = "..." only works for a parallel environment |
---|
44 | PA0020 unknown multigrid cycle: cycle_mg = "..." |
---|
45 | PA0021 unknown fft-algorithm: fft_method = "..." |
---|
46 | PA0022 unknown advection scheme: momentum_advec = "..." |
---|
47 | PA0023 momentum_advec = "..." is not allowed with |
---|
48 | timestep_scheme = "..." |
---|
49 | PA0024 unknown advection scheme: scalar_advec = "..." |
---|
50 | PA0025 use_upstream_for_tke set .TRUE. because |
---|
51 | use_sgs_for_particles = .TRUE. |
---|
52 | PA0026 use_upstream_for_tke = .TRUE. not allowed with |
---|
53 | timestep_scheme = "..." |
---|
54 | PA0027 unknown timestep scheme: timestep_scheme = "..." |
---|
55 | PA0028 scalar advection scheme "..." does not work with |
---|
56 | timestep_scheme ".." |
---|
57 | PA0029 momentum advection scheme "..." does not work with |
---|
58 | timestep_scheme "..." |
---|
59 | PA0030 initializing_action = "..." unkown or not allowed |
---|
60 | PA0031 initializing_actions = "set_constant_profiles" and |
---|
61 | "set_1d-model_profiles" are not allowed simultaneously |
---|
62 | PA0032 initializing_actions = "set_constant_profiles" and |
---|
63 | "by_user" are not allowed simultaneously |
---|
64 | PA0033 initializing_actions = "by_user" and |
---|
65 | "set_1d-model_profiles" are not allowed simultaneously |
---|
66 | PA0034 cloud_physics = ... is not allowed with humidity = ... |
---|
67 | PA0035 precipitation = ... is not allowed with |
---|
68 | cloud_physics = ... |
---|
69 | PA0036 humidity = .TRUE. and sloping_surface = .TRUE. are not |
---|
70 | allowed simultaneously |
---|
71 | PA0037 UPS-scheme is not implemented for humidity = .TRUE. |
---|
72 | PA0038 humidity = .TRUE. and passive_scalar = .TRUE. is not |
---|
73 | allowed simultaneously' |
---|
74 | PA0039 UPS-scheme is not implemented for passive_scalar = .TRUE. |
---|
75 | PA0040 illegal value "..." found for parameter grid_matching |
---|
76 | PA0041 plant_canopy = .TRUE. requires a non-zero |
---|
77 | drag coefficient given value is drag_coefficient = 0.0 |
---|
78 | PA0042 use_top_fluxes must be .TRUE. in ocean version |
---|
79 | PA0043 ABS( alpha_surface = ... ) must be < 90.0 |
---|
80 | PA0044 dt = ', dt , ' <= 0.0 |
---|
81 | PA0045 cfl_factor = ... out of range |
---|
82 | 0.0 < cfl_factor <= 1.0 is required |
---|
83 | PA0046 baroclinicity (ug) not allowed simultaneously with |
---|
84 | galilei transformation |
---|
85 | PA0047 baroclinicity (vg) not allowed simultaneously with |
---|
86 | galilei transformation |
---|
87 | PA0048 variable translation speed used for |
---|
88 | galilei-transformation, which may cause instabilities |
---|
89 | in stably stratified regions |
---|
90 | PA0049 unknown boundary condition: bc_lr = "..." |
---|
91 | PA0050 unknown boundary condition: bc_ns = "..." |
---|
92 | PA0051 non-cyclic lateral boundaries do not |
---|
93 | allow psolver = "..." |
---|
94 | PA0052 non-cyclic lateral boundaries do not allow |
---|
95 | momentum_advec = "..." |
---|
96 | PA0053 non-cyclic lateral boundaries do not allow |
---|
97 | scalar_advec = "..." |
---|
98 | PA0054 non-cyclic lateral boundaries do not allow |
---|
99 | galilei_transformation = .T. |
---|
100 | PA0055 adjust_mixing_length = TRUE and bc_e_b = "neumann" |
---|
101 | PA0056 adjust_mixing_length = FALSE and bc_e_b = "..." |
---|
102 | PA0057 boundary condition bc_e_b changed to "..." |
---|
103 | PA0058 unknown boundary condition: bc_e_b = "..." |
---|
104 | PA0059 unknown boundary condition: bc_p_b = "..." |
---|
105 | PA0060 boundary condition: bc_p_b = "..." not allowed with |
---|
106 | prandtl_layer = .FALSE.' |
---|
107 | PA0061 unknown boundary condition: bc_p_t = "..." |
---|
108 | PA0062 unknown boundary condition: bc_pt_b = "..." |
---|
109 | PA0063 unknown boundary condition: bc_pt_t = "..." |
---|
110 | PA0064 both, top_momentumflux_u AND top_momentumflux_v |
---|
111 | must be set |
---|
112 | PA0065 boundary_condition: bc_pt_b = "..." is not allowed |
---|
113 | with constant_heatflux = .TRUE. |
---|
114 | PA0066 constant_heatflux = .TRUE. is not allowed with |
---|
115 | pt_surface_initial_change (/=0) = ... |
---|
116 | PA0067 boundary_condition: bc_pt_t = "..." is not allowed |
---|
117 | with constant_top_heatflux = .TRUE. |
---|
118 | PA0068 unknown boundary condition: bc_sa_t = "..." |
---|
119 | PA0069 boundary condition: bc_sa_t = "..." requires to set |
---|
120 | top_salinityflux |
---|
121 | PA0070 boundary condition: bc_sa_t = "..." is not allowed |
---|
122 | with constant_top_salinityflux = .TRUE.' |
---|
123 | PA0071 unknown boundary condition: bc_..._b ="..." |
---|
124 | PA0072 unknown boundary condition: bc_..._t ="..." |
---|
125 | PA0073 boundary condition: bc_..._b = "..." is not allowed |
---|
126 | with prescribed surface flux |
---|
127 | PA0074 a prescribed surface flux is not allowed |
---|
128 | with ..._surface_initial_change (/=0) = ... |
---|
129 | PA0075 boundary condition: bc_uv_b = "..." is not allowed |
---|
130 | with prandtl_layer = .TRUE. |
---|
131 | PA0076 unknown boundary condition: bc_uv_b = "..." |
---|
132 | PA0077 unknown boundary condition: bc_uv_t = "..." |
---|
133 | PA0078 rayleigh_damping_factor = ... out of range [0.0,1.0] |
---|
134 | PA0079 rayleigh_damping_height = ... out of range [0.0, ...] |
---|
135 | PA0080 overshoot_limit_... < 0.0 is not allowed |
---|
136 | PA0081 ups_limit_... < 0.0 is not allowed |
---|
137 | PA0082 number of statistic_regions = ... but only |
---|
138 | 10 regions are allowed |
---|
139 | PA0083 normalizing_region = ... must be >= 0 and <= ... (value |
---|
140 | of statistic_regions) |
---|
141 | PA0084 dt_sort_particles is reset to 0.0 because of |
---|
142 | cloud_droplets = .TRUE. |
---|
143 | PA0085 averaging_interval = ... must be <= dt_data_output = ... |
---|
144 | PA0086 averaging_interval_pr = ... must be <= dt_dopr = ... |
---|
145 | PA0087 averaging_interval_sp = ... must be <= dt_dosp = ... |
---|
146 | PA0088 dt_averaging_input = ... must |
---|
147 | be <= averaging_interval = ... |
---|
148 | PA0089 dt_averaging_input_pr = ... must be |
---|
149 | <= averaging_interval_pr = ... |
---|
150 | PA0090 precipitation_amount_interval = ... must not be |
---|
151 | larger than dt_do2d_xy = ... |
---|
152 | PA0091 data_output_pr = ... is not implemented for |
---|
153 | ocean = .FALSE.' |
---|
154 | PA0092 data_output_pr = ... is not implemented for |
---|
155 | humidity = .FALSE.' |
---|
156 | PA0093 data_output_pr = ... is not implemented for |
---|
157 | passive_scalar = .FALSE.' |
---|
158 | PA0094 data_output_pr = ... is not implemented for |
---|
159 | cloud_physics = .FALSE.' |
---|
160 | PA0095 data_output_pr = ... is not implemented for |
---|
161 | cloud_physics = .FALSE. and humidity = .FALSE. |
---|
162 | PA0096 data_output_pr = ... is not implemented for |
---|
163 | cloud_physics = .FALSE. or cloud_droplets = .FALSE. |
---|
164 | PA0097 illegal value for data_output_pr or |
---|
165 | data_output_pr_user = "..." |
---|
166 | PA0098 illegal value for data_output_pr = "..." |
---|
167 | PA0099 z_max_do1d = ... must be >= ... or <= ... |
---|
168 | PA0100 unknown normalization method cross_normalized_x = "..." |
---|
169 | PA0101 unknown normalization method cross_normalized_y = "..." |
---|
170 | PA0102 number of output quantitities given by data_output |
---|
171 | and data_output_user exceeds the limit of 100 |
---|
172 | PA0103 output of "..." requires constant_diffusion = .FALSE. |
---|
173 | PA0104 output of "..." requires a "particles_par"-NAMELIST |
---|
174 | in the parameter file (PARIN) |
---|
175 | PA0105 output of "..." requires humidity = .TRUE. |
---|
176 | PA0106 output of "" requires cloud_physics = .TRUE. or |
---|
177 | cloud_droplets = .TRUE.' |
---|
178 | PA0107 output of "..." requires cloud_droplets = .TRUE. |
---|
179 | PA0108 output of "..." requires cloud_physics = .TRUE. |
---|
180 | PA0109 output of "..." requires ocean = .TRUE. |
---|
181 | PA0110 output of "..." requires passive_scalar = .TRUE. |
---|
182 | PA0111 illegal value for data_output: "..." only |
---|
183 | 2d-horizontal cross sections are allowed for this value |
---|
184 | PA0112 output of "..." requires precipitation = .TRUE. |
---|
185 | PA0113 temporal averaging of precipitation amount "..." |
---|
186 | is not possible' |
---|
187 | PA0114 illegal value for data_output or data_output_user = "..." |
---|
188 | PA0115 illegal value for data_output = "..." |
---|
189 | PA0116 z_max_do2d = ', z_max_do2d must be >= ... (zu(nzb+1)) |
---|
190 | and <= ... (zu(nzt)) |
---|
191 | PA0117 do3d_compress = .TRUE. not allowed on host "" |
---|
192 | PA0118 illegal precision: do3d_comp_prec ( ...) = "..." |
---|
193 | PA0119 unknown variable "..." given for do3d_comp_prec(...) |
---|
194 | PA0120 unknown value for data_output_format "..." |
---|
195 | PA0121 km_constant = ... < 0.0 |
---|
196 | PA0122 prandtl_number = ... < 0.0 |
---|
197 | PA0123 prandtl_layer is not allowed with fixed value of km |
---|
198 | PA0124 outflow_damping width out of range |
---|
199 | PA0125 rif_min = ... must be less than rif_max = ... |
---|
200 | PA0126 disturbance_level_b = ... must be >= ... (zu(3)) |
---|
201 | PA0127 disturbance_level_b = ... must be <= ... (zu(nzt-2)) |
---|
202 | PA0128 disturbance_level_t = ... must be <= ... (zu(nzt-2)) |
---|
203 | PA0129 disturbance_level_t = ... must |
---|
204 | be >= disturbance_level_b = ... |
---|
205 | PA0130 disturbance_level_ind_t =... must |
---|
206 | be >= disturbance_level_b = ... |
---|
207 | PA0131 inflow_disturbance_begin out of range |
---|
208 | PA0132 inflow_disturbance_end out of range |
---|
209 | PA0133 turbulent_inflow = .T. requires a Dirichlet |
---|
210 | condition at the inflow boundary |
---|
211 | PA0134 illegal value for recycling_width: ... |
---|
212 | PA0135 unknown random generator: random_generator = "..." |
---|
213 | PA0136 damp_level_1d = ... must be > 0.0 and < ... (zu(nzt+1)) |
---|
214 | PA0137 mixing_length_1d = "..." is unknown |
---|
215 | PA0138 dissipation_1d = "..." is unknown |
---|
216 | PA0139 termination_time_needed = ... must be > 30.0 on host ... |
---|
217 | PA0140 termination_time_needed = ... should be >= 300.0 |
---|
218 | on host "..." |
---|
219 | PA0141 coupling requires PALM to be called with |
---|
220 | ''mrun -K parallel'' |
---|
221 | PA0142 absolute temperature < 0.0 at zu(...) = ... |
---|
222 | PA0143 k=... j=... i=... ql_c=... part(...)%wf=... |
---|
223 | delta_r=... |
---|
224 | PA0144 #1 k=... j=... i=... e_s=... e_a=... t_int=... |
---|
225 | d_radius=... delta_r=... particle_radius=... |
---|
226 | PA0145 collision_efficiency out of range: ... |
---|
227 | PA0146 maximum_number_of_particles needs to be increased |
---|
228 | but this is not allowed with NetCDF output switched on |
---|
229 | PA0147 maximum_number_of_tails needs to be increased |
---|
230 | but this is not allowed with NetCDF output switched on |
---|
231 | PA0148 particle too fast. n = ... |
---|
232 | PA0149 particle out of range: i=... j=... k=... |
---|
233 | nxl=... nxr=... nys=... nyn=... nzb=... nzt=... |
---|
234 | PA0150 Both dp_external and conserve_volume_flow are .TRUE. |
---|
235 | but one of them must be .FALSE. |
---|
236 | PA0151 dp_level_b = ... is out of range |
---|
237 | PA0152 dp_external is .TRUE. but dpdxy is zero, |
---|
238 | i.e. the external |
---|
239 | pressure gradient will not be applied |
---|
240 | PA0153 dpdxy is nonzero but dp_external is .FALSE., i.e. the |
---|
241 | external pressure gradient will not be applied |
---|
242 | PA0154 unknown conserve_volume_flow_mode: ... |
---|
243 | PA0155 noncyclic boundary conditions require |
---|
244 | conserve_volume_flow_mode = ''inflow_profile'' |
---|
245 | PA0156 cyclic boundary conditions require |
---|
246 | conserve_volume_flow_mode = ''initial_profiles'' or |
---|
247 | ''bulk_velocity'' requires noncyclic boundary conditions |
---|
248 | PA0157 nonzero bulk velocity requires |
---|
249 | conserve_volume_flow = .T. and |
---|
250 | conserve_volume_flow_mode = ''bulk_velocity'' |
---|
251 | PA0158 no vertical boundary condition for variable "..." |
---|
252 | PA0159 no term for component "..." |
---|
253 | PA0160 non-cyclic lateral boundaries along x do not allow |
---|
254 | calculation of spectra along x |
---|
255 | PA0161 sorry, calculation of spectra in non parallel mode is |
---|
256 | still not realized |
---|
257 | PA0162 non-cyclic lateral boundaries along y do not allow |
---|
258 | calculation of spectra along y |
---|
259 | PA0163 run will be terminated because it is running out of |
---|
260 | job cpu limit remaining time: ... s |
---|
261 | termination time needed: ... s |
---|
262 | PA0164 run will be terminated due to user settings of |
---|
263 | restart_time / dt_restart new restart time is: ... s |
---|
264 | PA0165 re-open of unit 14 is not verified. Please check results! |
---|
265 | PA0166 re-opening of file-id ... is not allowed |
---|
266 | PA0167 opening file-id ... not allowed for PE ... |
---|
267 | PA0168 opening file-id ... is not allowed since it is used |
---|
268 | otherwise |
---|
269 | PA0169 no filename for AVS-data-file found in MRUN-config-file |
---|
270 | filename in FLD-file set to "unknown" |
---|
271 | PA0170 no path for batch_scp on host "..." |
---|
272 | PA0171 NetCDF: no 64-bit offset allowed on this machine |
---|
273 | PA0172 no OPEN-statement for file-id ... |
---|
274 | PA0173 wrong component: ... |
---|
275 | PA0174 wrong argument expected: ... given: ... |
---|
276 | PA0175 no time measurement defined on this host |
---|
277 | PA0176 negative time interval occured |
---|
278 | PE ... L=PAUSE "..." new=... last=... |
---|
279 | PA0177 negative time interval occured |
---|
280 | PE ... L=STOP "..." new=... last=... isum=... |
---|
281 | PA0178 negative time interval occured |
---|
282 | PE ... L=STOP "..." sum=... mtime=... |
---|
283 | PA0179 unknown modus of time measurement: ... |
---|
284 | PA0180 unknown cross-section: ... |
---|
285 | PA0181 no output provided for: ... |
---|
286 | PA0182 no output available for: ... |
---|
287 | PA0183 if humidity/passive_scalar = FALSE output of ... |
---|
288 | is not provided |
---|
289 | PA0184 if cloud_physics = FALSE output of ... is not provided |
---|
290 | PA0185 data_output_profiles: normalizing cross ... |
---|
291 | is not possible since one of the normalizing factors |
---|
292 | is zero! |
---|
293 | cross_normx_factor(...,...) = ... |
---|
294 | cross_normy_factor(...,...) = ... |
---|
295 | PA0186 no spectra data available |
---|
296 | PA0187 fft method "..." currently does not work on NEC |
---|
297 | PA0188 no system-specific fft-call available |
---|
298 | PA0189 fft method "..." not available |
---|
299 | PA0190 flow_statistics is called two times within one timestep |
---|
300 | PA0191 unknown action(s): ... |
---|
301 | PA0192 timestep has exceeded the lower limit dt_1d = ... s |
---|
302 | simulation stopped! |
---|
303 | PA0193 unknown initializing problem |
---|
304 | PA0194 number of time series quantities exceeds its maximum |
---|
305 | of dots_max = ... Please increase dots_max in |
---|
306 | modules.f90. |
---|
307 | PA0195 dvrp_username is undefined |
---|
308 | PA0196 dvrp_output="..." not allowed |
---|
309 | PA0197 dvrp_file="..." not allowed |
---|
310 | PA0198 mode_dvrp="..." not allowed |
---|
311 | PA0199 split of communicator not realized with MPI1 coupling |
---|
312 | atmosphere-ocean' |
---|
313 | PA0200 missing dz |
---|
314 | PA0201 dz=... <= 0.0 |
---|
315 | PA0202 grid anisotropy exceeds threshold given by only local |
---|
316 | horizontal reduction of near_wall mixing length l_wall |
---|
317 | starting from height level k = ... . |
---|
318 | PA0203 inconsistent building parameters: bxl=... bxr=... bys=... |
---|
319 | byn=... nx=... ny=... |
---|
320 | PA0204 no street canyon width given |
---|
321 | PA0205 inconsistent canyon parameters: cxl=... cxr=... |
---|
322 | cwx=... ch=... nx=... ny=... |
---|
323 | PA0206 inconsistent canyon parameters:... cys=... cyn=... |
---|
324 | cwy=... ch=... nx=... ny=... |
---|
325 | PA0207 inconsistent canyon parameters: street canyon can |
---|
326 | only be oriented either in x- or in y-direction |
---|
327 | PA0208 file TOPOGRAPHY_DATA does not exist |
---|
328 | PA0209 errors in file TOPOGRAPHY_DATA |
---|
329 | PA0210 nzb_local values are outside the model domain |
---|
330 | MINVAL( nzb_local ) = ... |
---|
331 | MAXVAL( nzb_local ) = ... |
---|
332 | PA0211 nzb_local does not fulfill cyclic boundary condition |
---|
333 | in x-direction |
---|
334 | PA0212 nzb_local does not fulfill cyclic boundary condition |
---|
335 | in y-direction |
---|
336 | PA0213 max_number_of_particle_groups =... |
---|
337 | number_of_particle_groups reset to ... |
---|
338 | PA0214 version mismatch concerning data from prior run |
---|
339 | version on file = ... |
---|
340 | version in program = ... |
---|
341 | PA0215 particle group # ... has a density ratio /= 0 |
---|
342 | but radius = 0 |
---|
343 | PA0216 number of initial particles (...) exceeds |
---|
344 | maximum_number_of_particles (...) on PE ... |
---|
345 | PA0217 unknown boundary condition bc_par_b = "..." |
---|
346 | PA0218 unknown boundary condition bc_par_t = "..." |
---|
347 | PA0219 unknown boundary condition bc_par_lr = "..." |
---|
348 | PA0220 unknown boundary condition bc_par_ns = "..." |
---|
349 | PA0221 number of PEs of the prescribed topology (...) does not |
---|
350 | match the number of PEs available to the job () |
---|
351 | PA0222 if the processor topology is prescribed by the user, |
---|
352 | both values of "npex" and "npey" must be given |
---|
353 | in the NAMELIST-parameter file |
---|
354 | PA0223 psolver = "poisfft_hybrid" can only be used in case of |
---|
355 | a 1d-decomposition along x |
---|
356 | PA0224 no matching grid for transpositions found |
---|
357 | PA0225 x-direction: gridpoint number (...)is not an |
---|
358 | integral divisor of the number of procesors (...) |
---|
359 | PA0226 x-direction: nx does not match the requirements given |
---|
360 | by the number of PEs used |
---|
361 | please use nx = ... instead of nx =... |
---|
362 | PA0227 y-direction: gridpoint number (...) is not an |
---|
363 | integral divisor of the number of processors (...) |
---|
364 | PA0228 y-direction: ny does not match the requirements given |
---|
365 | by the number of PEs used |
---|
366 | please use ny = ... instead of ny =... |
---|
367 | PA0229 1d-decomposition along x chosen but nz restrictions |
---|
368 | may occur since ups-scheme is activated |
---|
369 | PA0230 transposition z --> x: |
---|
370 | nz=... is not an integral divisior of pdims(1)= ... |
---|
371 | PA0231 transposition x --> y: |
---|
372 | nx+1=... is not an integral divisor of pdims(2)= ... |
---|
373 | PA0232 transposition y --> z: |
---|
374 | ny+1=... is not an integral divisor of pdims(1)=... |
---|
375 | PA0233 transposition x --> y: |
---|
376 | ny+1=... is not an integral divisor of pdims(1)=... |
---|
377 | PA0234 direct transposition z --> y (needed for spectra): |
---|
378 | nz=... is not an integral divisor of pdims(2)=... |
---|
379 | PA0235 mg_switch_to_pe0_level out of range and reset to |
---|
380 | default (=0) |
---|
381 | PA0236 not enough memory for storing gathered multigrid data |
---|
382 | on PE0 |
---|
383 | PA0237 multigrid gather/scatter impossible in non parallel mode |
---|
384 | PA0238 more than 10 multigrid levels |
---|
385 | PA0239 The value for "topography_grid_convention" is not set. |
---|
386 | Its default value is only valid for |
---|
387 | "topography" = ''single_building'', |
---|
388 | ''single_street_canyon'' or ''read_from_file'' |
---|
389 | Choose ''cell_edge'' or ''cell_center''. |
---|
390 | PA0240 The value for "topography_grid_convention" is not |
---|
391 | recognized. Choose ''cell_edge'' or ''cell_center''. |
---|
392 | PA0241 netcdf_precision must contain a "_" |
---|
393 | netcdf_precision(...)="..." |
---|
394 | PA0242 illegal netcdf precision: netcdf_precision( ...)="..." |
---|
395 | PA0243 unknown variable in inipar assignment: |
---|
396 | netcdf_precision(', i, ')="..." |
---|
397 | PA0244 no grid defined for variable ... |
---|
398 | PA0245 NetCDF file for volume data ... from previuos run found, |
---|
399 | but this file cannot be extended due to variable |
---|
400 | mismatch. |
---|
401 | New file is created instead. |
---|
402 | PA0246 NetCDF file for volume data ... from previuos run found, |
---|
403 | but this file cannot be extended due to mismatch in |
---|
404 | number of vertical grid points (nz_do3d). |
---|
405 | New file is created instead. |
---|
406 | PA0247 NetCDF file for volume data ... from previuos run found, |
---|
407 | but this file cannot be extended because the current |
---|
408 | output time is less or equal than the last output time |
---|
409 | on this file. New file is created instead. |
---|
410 | PA0248 NetCDF file for volume data ... from previous run found. |
---|
411 | This file will be extended. |
---|
412 | PA0249 NetCDF file for cross-sections ... from previuos run |
---|
413 | found, but this file cannot be extended due to |
---|
414 | variable mismatch. New file is created instead. |
---|
415 | PA0250 NetCDF file for cross-sections ... from previuos run |
---|
416 | found, but this file cannot be extended due to |
---|
417 | mismatch in number of cross sections. New file |
---|
418 | is created instead. |
---|
419 | PA0251 NetCDF file for cross-sections ... from previuos run |
---|
420 | found but this file cannot be extended due to mismatch |
---|
421 | in cross section levels. New file is created instead. |
---|
422 | PA0252 NetCDF file for cross sections ... from previuos run |
---|
423 | found, but this file cannot be extended because the |
---|
424 | current output time is less or equal than the last |
---|
425 | output time on this file. New file is created instead. |
---|
426 | PA0253 NetCDF file for cross-sections ... from previous run |
---|
427 | found. This file will be extended. |
---|
428 | PA0254 NetCDF file for vertical profiles from previuos run |
---|
429 | found, but this file cannot be extended due to variable |
---|
430 | mismatch. New file is created instead. |
---|
431 | PA0255 NetCDF file for vertical profiles from previuos run |
---|
432 | found, but this file cannot be extended because the |
---|
433 | current output time is less or equal than the last |
---|
434 | output time on this file. New file is created instead. |
---|
435 | PA0256 NetCDF file for vertical profiles from previous run |
---|
436 | found. This file will be extended. |
---|
437 | PA0257 NetCDF file for time series from previuos run found |
---|
438 | but this file cannot be extended due tovariable |
---|
439 | mismatch. New file is created instead. |
---|
440 | PA0258 NetCDF file for time series from previuos run found, |
---|
441 | but this file cannot be extended because the current |
---|
442 | output time is less or equal than the last output time |
---|
443 | on this file. New file is created instead. |
---|
444 | PA0259 NetCDF file for time series from previous run found. |
---|
445 | This file will be extended. |
---|
446 | PA0260 NetCDF file for spectra from previuos run found, |
---|
447 | but this file cannot be extended due to variable |
---|
448 | mismatch. New file is created instead. |
---|
449 | PA0261 NetCDF file for spectra from previuos run found, |
---|
450 | but this file cannot be extended due to mismatch in |
---|
451 | number of vertical levels. New file is created instead. |
---|
452 | PA0262 NetCDF file for spectra from previuos run found, |
---|
453 | but this file cannot be extended due to mismatch in |
---|
454 | heights of vertical levels. New file is created instead. |
---|
455 | PA0263 NetCDF file for spectra from previuos run found, |
---|
456 | but this file cannot be extended because the current |
---|
457 | output time is less or equal than the last output time |
---|
458 | on this file. New file is created instead. |
---|
459 | PA0264 NetCDF file for spectra from previous run found. |
---|
460 | This file will be extended. |
---|
461 | PA0265 NetCDF file for particles from previuos run found, |
---|
462 | but this file cannot be extended because the current |
---|
463 | output time is less or equal than the last output time |
---|
464 | on this file. New file is created instead. |
---|
465 | PA0266 NetCDF file for particles from previous run found. |
---|
466 | This file will be extended. |
---|
467 | PA0267 NetCDF file for particle time series from previuos run |
---|
468 | found, but this file cannot be extended due to |
---|
469 | variable mismatch. New file is created instead. |
---|
470 | PA0268 NetCDF file for particle time series from previuos run |
---|
471 | found, but this file cannot be extended because the |
---|
472 | current output time is less or equal than the last |
---|
473 | output time on this file. New file is created instead. |
---|
474 | PA0269 NetCDF file for particle time series from previous run |
---|
475 | found. This file will be extended. |
---|
476 | PA0270 mode "..." not supported |
---|
477 | PA0271 errors in \$inipar &or no \$inipar-namelist found |
---|
478 | (CRAY-machines only) |
---|
479 | PA0272 no \$inipar-namelist found |
---|
480 | PA0273 no value or wrong value given for nx: nx=... |
---|
481 | PA0274 no value or wrong value given for ny: ny=... |
---|
482 | PA0275 no value or wrong value given for nz: nz=... |
---|
483 | PA0276 local file ENVPAR not found |
---|
484 | some variables for steering may not be properly set |
---|
485 | PA0277 errors in local file ENVPAR |
---|
486 | some variables for steering may not be properly set |
---|
487 | PA0278 no envpar-NAMELIST found in local file ENVPAR |
---|
488 | some variables for steering may not be properly set |
---|
489 | PA0279 wrong component: ... |
---|
490 | PA0280 Number of OpenMP threads = ... |
---|
491 | PA0281 running optimized multinode version |
---|
492 | switch_per_lpar = ... |
---|
493 | tasks_per_lpar = ... |
---|
494 | tasks_per_logical_node = ... |
---|
495 | PA0282 parallel environment (MPI) required |
---|
496 | PA0283 no sufficient convergence within 1000 cycles |
---|
497 | PA0284 data from subdomain of previous run mapped more |
---|
498 | than 1000 times |
---|
499 | PA0285 number of PEs or virtual PE-grid changed in restart run |
---|
500 | PE ... will read from files ... |
---|
501 | PA0286 version mismatch concerning data from prior run |
---|
502 | version on file = "..." |
---|
503 | version in program = "..." |
---|
504 | PA0287 problem with index bound nxl on restart file "..." |
---|
505 | nxl = ... but it should be = ... from the index bound |
---|
506 | information array |
---|
507 | PA0288 problem with index bound nxr on restart file "..." |
---|
508 | nxr = ... but it should be = ... from the index bound |
---|
509 | information array |
---|
510 | PA0289 problem with index bound nys on restart file "..." |
---|
511 | nys = .. but it should be = ... from the index bound |
---|
512 | information array |
---|
513 | PA0290 problem with index bound nyn on restart file "..." |
---|
514 | nyn = ... but it should be = ... from the index bound |
---|
515 | information array |
---|
516 | PA0291 mismatch between actual data and data |
---|
517 | from prior run on PE ... |
---|
518 | nzb on file = ... |
---|
519 | nzb = ... |
---|
520 | PA0292 mismatch between actual data and data |
---|
521 | from prior run on PE ... |
---|
522 | nzt on file = ... |
---|
523 | nzt = ... |
---|
524 | PA0293 read_3d_binary: spectrum_x |
---|
525 | on restart file ignored because total numbers of |
---|
526 | grid points (nx) do not match |
---|
527 | PA0294 read_3d_binary: spectrum_y |
---|
528 | on restart file ignored because total numbers of |
---|
529 | grid points (ny) do not match |
---|
530 | PA0295 unknown field named "..." found in data from |
---|
531 | prior run on PE ... |
---|
532 | PA0296 version mismatch concerning control variables |
---|
533 | version on file = "..." |
---|
534 | version on program = "..." |
---|
535 | PA0297 numprocs not found in data from prior run on PE ... |
---|
536 | PA0298 hor_index_bounds not found in data from prior |
---|
537 | run on PE ... |
---|
538 | PA0299 nz not found in data from prior run on PE ... |
---|
539 | PA0300 max_pr_user not found in data from prior run on PE ... |
---|
540 | PA0301 statistic_regions not found in data from prior |
---|
541 | run on PE ... |
---|
542 | PA0302 unknown variable named "..." found in data from |
---|
543 | prior run on PE ... |
---|
544 | PA0303 nz not found in restart data file |
---|
545 | PA0304 mismatch concerning number of gridpoints along z |
---|
546 | nz on file = "..." |
---|
547 | nz from run = "..." |
---|
548 | PA0305 max_pr_user not found in restart data file |
---|
549 | PA0306 number of user profiles on restart data file differs |
---|
550 | from the current run |
---|
551 | max_pr_user on file = "..." |
---|
552 | max_pr_user from run = "..." |
---|
553 | PA0307 statistic_regions not found in restart data file |
---|
554 | PA0308 statistic regions on restart data file differ |
---|
555 | from the current run |
---|
556 | statistic regions on file = "..." |
---|
557 | statistic regions from run = "..." |
---|
558 | statistic data may be lost! |
---|
559 | PA0309 inflow profiles not temporally averaged. |
---|
560 | Averaging will be done now using ... samples. |
---|
561 | PA0310 remote model "..." terminated with |
---|
562 | terminate_coupled_remote = ... |
---|
563 | local model "..." has terminate_coupled = ... |
---|
564 | PA0311 number of gridpoints along x or/and y contain illegal |
---|
565 | factors only factors 8,6,5,4,3,2 are allowed |
---|
566 | PA0312 Time step has reached minimum limit. |
---|
567 | dt = ... s Simulation is terminated. |
---|
568 | old_dt = ... s |
---|
569 | dt_u = ... s |
---|
570 | dt_v = ... s |
---|
571 | dt_w = ... s |
---|
572 | dt_diff = ... s |
---|
573 | u_max = ... m/s k=... j=... i=... |
---|
574 | v_max = ... m/s k=... j=... i=... |
---|
575 | w_max = ... m/s k=... j=... i=... |
---|
576 | PA0313 illegal value for parameter particle_color: ... |
---|
577 | PA0314 illegal value for parameter particle_dvrpsize: ... |
---|
578 | PA0315 color_interval(2) <= color_interval(1) |
---|
579 | PA0316 dvrpsize_interval(2) <= dvrpsize_interval(1) |
---|
580 | PA0317 ocean = .F. does not allow coupling_char = ... |
---|
581 | set by mrun-option "-y" |
---|
582 | PA0318 inflow_damping_height must be explicitly specified |
---|
583 | because &the inversion height calculated by the prerun |
---|
584 | is zero |
---|
585 | PA0319 section_xy must be <= nz + 1 = ... |
---|
586 | PA0320 section_xz must be <= ny + 1 = ... |
---|
587 | PA0321 section_yz must be <= nx + 1 = ... |
---|
588 | |
---|
589 | UI0001 unknown location "..." |
---|
590 | UI0002 location "..." is not allowed to be called with |
---|
591 | parameters "i" and "j" |
---|
592 | UI0003 no output possible for: ... |
---|
593 | UI0004 unknown mode "..." |
---|
594 | UI0005 topography "..." not available yet |
---|
595 | UI0006 unknown topography "..." |
---|
596 | UI0007 canopy_mode "..." not available yet |
---|
597 | UI0008 unknown canopy_mode "..." |
---|
598 | UI0009 the number of user-defined profiles given in |
---|
599 | data_output_pr (...) does not match the one |
---|
600 | found in the restart file (...) |
---|
601 | UI0010 Spectra of ... can not be calculated |
---|
602 | UI0011 Spectra of ... are not defined |
---|
603 | UI0012 unknown variable named "..." found in data from prior |
---|
604 | run on PE |
---|
605 | |
---|
606 | |
---|
607 | |
---|
608 | internal assigned error numbers (errno) for the call of the subroutine |
---|
609 | "handle_netcdf_error": |
---|
610 | |
---|
611 | assigned free |
---|
612 | 1 - 375 376 |
---|
613 | 377 - 428 386 |
---|
614 | 1009 - 1010 |
---|