source: palm/trunk/DOC/tec/message_identifiers @ 288

Last change on this file since 288 was 288, checked in by heinze, 12 years ago

NetCDF unit attribute in timeseries output added, typographical error in modules fixed

File size: 36.7 KB
Line 
1 List of message identifiers used in PALM message handling routine "message"
2
3    PA****  Identifier for messages in the PALM standard code
4    UI****  Identifier for messages in "user_" routines
5    NC****  Identifier for messages from the NetCDF library
6
7message_identifier   message string
8    PA0001            "host" is not set. Please check that environment
9                        variable "localhost" is set before running PALM
10    PA0002            illegal coupling mode: ...
11    PA0003            dt_coupling is  not set but required for coupling
12                       mode "..."
13    PA0004            coupling mode "...": dt_coupling = ... is not equal
14                       to dt_coupling_remote = ...       
15    PA0005            coupling mode "...": dt_coupling <= 0.0 is not allowed
16                       and is reset to MAX(dt_max(A,O)) = ...
17    PA0006            coupling mode "...": restart_time = ... is not equal
18                       to restart_time_remote = ...
19    PA0007            coupling mode "...": dt_restart = ... is not equal
20                       to dt_restart_remote = ...
21    PA0008            coupling mode "...": end_time = ... is not equal to
22                       end_time_remote = ...
23    PA0009            coupling mode "...":  dx = ... is not equal to
24                       dx_remote = ...
25    PA0010            coupling mode "...":  dy = ... is not equal to
26                       dy_remote = ...
27    PA0011            coupling mode "...": nx = ... is not equal to
28                       nx_remote = ...
29    PA0012            coupling mode "...": ny = ... is not equal to
30                       ny_remote = ...
31    PA0013            illegal value given for loop_optimization: "..."
32    PA0014            a non-flat topography does not allow ...
33    PA0015            ocean = .T. does not allow ...
34    PA0016            unknown solver for perturbation pressure:
35                       psolver = "..."
36    PA0017            psolver = "..." only works for a
37                       1d domain-decomposition along x
38                      please do not set npey/=1 in the parameter file'
39    PA0018            psolver = ".." does not work for subdomains with
40                       unequal size please set grid_matching = ''strict''
41                       in the parameter file
42    PA0019            psolver = "..." only works for a parallel environment
43    PA0020            unknown multigrid cycle: cycle_mg = "..."
44    PA0021            unknown fft-algorithm: fft_method = "..."
45    PA0022            unknown advection scheme: momentum_advec = "..."
46    PA0023            momentum_advec = "..." is not allowed with
47                       timestep_scheme = "..."
48    PA0024            unknown advection scheme: scalar_advec = "..."
49    PA0025            use_upstream_for_tke set .TRUE. because
50                       use_sgs_for_particles = .TRUE.
51    PA0026            use_upstream_for_tke = .TRUE. not allowed with
52                       timestep_scheme = "..."
53    PA0027            unknown timestep scheme: timestep_scheme = "..."
54    PA0028            scalar advection scheme "..." does not work with
55                       timestep_scheme ".."
56    PA0029            momentum advection scheme "..." does not work with
57                       timestep_scheme "..."
58    PA0030            initializing_action = "..." unkown or not allowed
59    PA0031            initializing_actions = "set_constant_profiles" and
60                       "set_1d-model_profiles" are not allowed simultaneously
61    PA0032            initializing_actions = "set_constant_profiles" and
62                       "by_user" are not allowed simultaneously
63    PA0033            initializing_actions = "by_user" and 
64                       "set_1d-model_profiles" are not allowed simultaneously
65    PA0034            cloud_physics = ... is not allowed with humidity = ...
66    PA0035            precipitation = ... is not allowed with
67                       cloud_physics = ...
68    PA0036            humidity = .TRUE. and sloping_surface = .TRUE. are not
69                       allowed simultaneously
70    PA0037            UPS-scheme is not implemented for humidity = .TRUE.
71    PA0038            humidity = .TRUE. and passive_scalar = .TRUE. is not
72                       allowed simultaneously'
73    PA0039            UPS-scheme is not implemented for passive_scalar = .TRUE.
74    PA0040            illegal value "..." found for parameter grid_matching
75    PA0041            plant_canopy = .TRUE. requires a non-zero
76                       drag coefficient given value is drag_coefficient = 0.0
77    PA0042            use_top_fluxes must be .TRUE. in ocean version
78    PA0043            ABS( alpha_surface = ... ) must be < 90.0
79    PA0044            dt = ', dt , ' <= 0.0
80    PA0045            cfl_factor = ...  out of range
81                       0.0 < cfl_factor <= 1.0 is required
82    PA0046            baroclinicity (ug) not allowed simultaneously with
83                       galilei transformation
84    PA0047            baroclinicity (vg) not allowed simultaneously with
85                       galilei transformation
86    PA0048            variable translation speed used for
87                       galilei-transformation, which may cause instabilities
88                       in stably stratified regions
89    PA0049            unknown boundary condition: bc_lr = "..."
90    PA0050            unknown boundary condition: bc_ns = "..."
91    PA0051            non-cyclic lateral boundaries do not
92                       allow psolver = "..."
93    PA0052            non-cyclic lateral boundaries do not allow
94                       momentum_advec = "..."
95    PA0053            non-cyclic lateral boundaries do not allow
96                       scalar_advec = "..."
97    PA0054            non-cyclic lateral boundaries do not allow
98                       galilei_transformation = .T.
99    PA0055            adjust_mixing_length = TRUE and bc_e_b = "neumann"
100    PA0056            adjust_mixing_length = FALSE and bc_e_b = "..."
101    PA0057            boundary condition bc_e_b changed to "..."
102    PA0058            unknown boundary condition: bc_e_b = "..."
103    PA0059            unknown boundary condition: bc_p_b = "..."
104    PA0060            boundary condition: bc_p_b = "..." not allowed with
105                       prandtl_layer = .FALSE.'
106    PA0061            unknown boundary condition: bc_p_t = "..."
107    PA0062            unknown boundary condition: bc_pt_b = "..."
108    PA0063            unknown boundary condition: bc_pt_t = "..."
109    PA0064            both, top_momentumflux_u AND top_momentumflux_v
110                       must be set
111    PA0065            boundary_condition: bc_pt_b = "..." is not allowed
112                       with constant_heatflux = .TRUE.
113    PA0066            constant_heatflux = .TRUE. is not allowed with
114                       pt_surface_initial_change (/=0) = ...
115    PA0067            boundary_condition: bc_pt_t = "..." is not allowed
116                       with constant_top_heatflux = .TRUE.
117    PA0068            unknown boundary condition: bc_sa_t = "..."
118    PA0069            boundary condition: bc_sa_t = "..." requires to set
119                       top_salinityflux
120    PA0070            boundary condition: bc_sa_t = "..." is not allowed
121                       with constant_top_salinityflux = .TRUE.'
122    PA0071            unknown boundary condition: bc_..._b ="..."
123    PA0072            unknown boundary condition: bc_..._t ="..."
124    PA0073            boundary condition: bc_..._b = "..." is not allowed
125                       with prescribed surface flux
126    PA0074            a prescribed surface flux is not allowed
127                       with ..._surface_initial_change (/=0) = ...
128    PA0075            boundary condition: bc_uv_b = "..." is not allowed
129                       with prandtl_layer = .TRUE.
130    PA0076            unknown boundary condition: bc_uv_b = "..."
131    PA0077            unknown boundary condition: bc_uv_t = "..."
132    PA0078            rayleigh_damping_factor = ... out of range [0.0,1.0]
133    PA0079            rayleigh_damping_height = ... out of range [0.0, ...]
134    PA0080            overshoot_limit_... < 0.0 is not allowed
135    PA0081            ups_limit_... < 0.0 is not allowed
136    PA0082            number of statistic_regions = ...  but only
137                      10 regions are allowed
138    PA0083            normalizing_region = ... must be >= 0 and <= ... (value
139                       of statistic_regions)
140    PA0084            dt_sort_particles is reset to 0.0 because of
141                       cloud_droplets = .TRUE.
142    PA0085            averaging_interval = ...  must be <= dt_data_output = ...
143    PA0086            averaging_interval_pr = ...  must be <= dt_dopr = ...
144    PA0087            averaging_interval_sp = ...  must be <= dt_dosp = ...
145    PA0088            dt_averaging_input = ...  must
146                       be <= averaging_interval = ...
147    PA0089            dt_averaging_input_pr = ...  must be
148                       <= averaging_interval_pr = ...
149    PA0090            precipitation_amount_interval = ...  must not be
150                       larger than dt_do2d_xy = ...
151    PA0091            data_output_pr = ...  is not implemented for
152                       ocean = .FALSE.'
153    PA0092            data_output_pr = ... is not implemented for
154                       humidity = .FALSE.'
155    PA0093            data_output_pr = ... is not implemented for
156                       passive_scalar = .FALSE.'
157    PA0094            data_output_pr = ... is not implemented for
158                       cloud_physics = .FALSE.'
159    PA0095            data_output_pr = ... is not implemented for
160                       cloud_physics = .FALSE. and humidity = .FALSE.
161    PA0096            data_output_pr = ... is not implemented for
162                       cloud_physics = .FALSE. or cloud_droplets = .FALSE.
163    PA0097            illegal value for data_output_pr or
164                       data_output_pr_user = "..."       
165    PA0098            illegal value for data_output_pr = "..."
166    PA0099            z_max_do1d = ...  must be >= ... or <= ...
167    PA0100            unknown normalization method cross_normalized_x = "..."
168    PA0101            unknown normalization method cross_normalized_y = "..."
169    PA0102            number of output quantitities given by data_output
170                       and data_output_user exceeds the limit of 100
171    PA0103            output of "..." requires constant_diffusion = .FALSE.
172    PA0104            output of "..." requires a "particles_par"-NAMELIST
173                       in the parameter file (PARIN)
174    PA0105            output of "..." requires humidity = .TRUE.
175    PA0106            output of "" requires cloud_physics = .TRUE. or
176                       cloud_droplets = .TRUE.'
177    PA0107            output of "..." requires cloud_droplets = .TRUE.
178    PA0108            output of "..." requires cloud_physics = .TRUE.
179    PA0109            output of "..." requires ocean = .TRUE.
180    PA0110            output of "..." requires passive_scalar = .TRUE.
181    PA0111            illegal value for data_output: "..." only
182                       2d-horizontal cross sections are allowed for this value
183    PA0112            output of "..." requires precipitation = .TRUE.
184    PA0113            temporal averaging of precipitation amount "..."
185                       is not possible'       
186    PA0114            illegal value for data_output or data_output_user = "..."
187    PA0115            illegal value for data_output = "..."
188    PA0116            z_max_do2d = ', z_max_do2d must be >= ... (zu(nzb+1))
189                       and <= ... (zu(nzt))
190    PA0117            do3d_compress = .TRUE. not allowed on host ""
191    PA0118            illegal precision: do3d_comp_prec ( ...) = "..."
192    PA0119            unknown variable "..." given for do3d_comp_prec(...)   
193    PA0120            unknown value for data_output_format "..."
194    PA0121            km_constant = ... < 0.0
195    PA0122            prandtl_number = ... < 0.0
196    PA0123            prandtl_layer is not allowed with fixed value of km
197    PA0124            outflow_damping width out of range
198    PA0125            rif_min = ...  must be less than rif_max = ...
199    PA0126            disturbance_level_b = ... must be >= ... (zu(3))
200    PA0127            disturbance_level_b = ... must be <= ... (zu(nzt-2))
201    PA0128            disturbance_level_t = ... must be <= ... (zu(nzt-2))
202    PA0129            disturbance_level_t = ... must
203                       be >= disturbance_level_b = ...
204    PA0130            disturbance_level_ind_t =...  must
205                       be >= disturbance_level_b = ...
206    PA0131            inflow_disturbance_begin out of range
207    PA0132            inflow_disturbance_end out of range
208    PA0133            turbulent_inflow = .T. requires a Dirichlet
209                       condition at the inflow boundary
210    PA0134            illegal value for recycling_width: ...
211    PA0135            unknown random generator: random_generator = "..."
212    PA0136            damp_level_1d = ...  must be > 0.0 and < ... (zu(nzt+1))
213    PA0137            mixing_length_1d = "..." is unknown
214    PA0138            dissipation_1d = "..." is unknown
215    PA0139            termination_time_needed = ...  must be > 30.0 on host ...
216    PA0140            termination_time_needed = ... should be >= 300.0
217                       on host "..."     
218    PA0141            coupling requires PALM to be called with
219                       ''mrun -K parallel''
220    PA0142            absolute temperature < 0.0 at zu(...) = ...
221    PA0143            k=... j=... i=... ql_c=... part(...)%wf=... 
222                       delta_r=...
223    PA0144            #1 k=... j=... i=... e_s=...  e_a=... t_int=...
224                       d_radius=... delta_r=... particle_radius=... 
225    PA0145            collision_efficiency out of range: ...
226    PA0146            maximum_number_of_particles needs to be increased
227                       but this is not allowed with NetCDF output switched on
228    PA0147            maximum_number_of_tails needs to be increased
229                       but this is not allowed with NetCDF output switched on
230    PA0148            particle too fast.  n = ...
231    PA0149            particle out of range: i=... j=... k=...
232                       nxl=... nxr=... nys=... nyn=... nzb=... nzt=...
233    PA0150            Both dp_external and conserve_volume_flow are .TRUE.
234                       but one of them must be .FALSE.
235    PA0151            dp_level_b = ... is out of range
236    PA0152            dp_external is .TRUE. but dpdxy is zero,
237                       i.e. the external
238                       pressure gradient will not be applied
239    PA0153            dpdxy is nonzero but dp_external is .FALSE., i.e. the
240                       external pressure gradient will not be applied
241    PA0154            unknown conserve_volume_flow_mode: ...
242    PA0155            noncyclic boundary conditions require
243                       conserve_volume_flow_mode = ''inflow_profile''
244    PA0156            cyclic boundary conditions require
245                       conserve_volume_flow_mode = ''initial_profiles'' or
246                       ''bulk_velocity'' requires noncyclic boundary conditions
247    PA0157            nonzero bulk velocity requires
248                       conserve_volume_flow = .T. and
249                       conserve_volume_flow_mode = ''bulk_velocity''
250    PA0158            no vertical boundary condition for variable "..."
251    PA0159            no term for component "..."
252    PA0160            non-cyclic lateral boundaries along x do not allow
253                       calculation of spectra along x
254    PA0161            sorry, calculation of spectra in non parallel mode is
255                       still not realized
256    PA0162            non-cyclic lateral boundaries along y do not allow
257                       calculation of spectra along y
258    PA0163            run will be terminated because it is running out of
259                       job cpu limit remaining time: ... s
260                       termination time needed: ... s
261    PA0164            run will be terminated due to user settings of
262                       restart_time / dt_restart new restart time is: ... s
263    PA0165            re-open of unit 14 is not verified. Please check results!
264    PA0166            re-opening of file-id ... is not allowed
265    PA0167            opening file-id ... not allowed for PE ...
266    PA0168            opening file-id ... is not allowed since it is used
267                       otherwise
268    PA0169            no filename for AVS-data-file found in MRUN-config-file
269                       filename in FLD-file set to "unknown"
270    PA0170            no path for batch_scp on host "..." 
271    PA0171            NetCDF: no 64-bit offset allowed on this machine
272    PA0172            no OPEN-statement for file-id ...
273    PA0173            wrong component: ...
274    PA0174            wrong argument  expected: ... given: ...
275    PA0175            no time measurement defined on this host
276    PA0176            negative time interval occured
277                       PE ... L=PAUSE "..." new=...  last=...
278    PA0177            negative time interval occured
279                       PE ... L=STOP "..." new=... last=... isum=...
280    PA0178            negative time interval occured
281                       PE ... L=STOP "..." sum=...  mtime=...
282    PA0179            unknown modus of time measurement: ...
283    PA0180            unknown cross-section: ...
284    PA0181            no output provided for: ...
285    PA0182            no output available for: ...
286    PA0183            if humidity/passive_scalar = FALSE output of ...
287                       is not provided
288    PA0184            if cloud_physics = FALSE output of ... is not provided
289    PA0185            data_output_profiles: normalizing cross ...
290                       is not possible since one of the normalizing factors
291                       is zero!
292                       cross_normx_factor(...,...) = ...
293                       cross_normy_factor(...,...) = ...
294    PA0186            no spectra data available
295    PA0187            fft method "..." currently does not work on NEC
296    PA0188            no system-specific fft-call available
297    PA0189            fft method "..." not available
298    PA0190            flow_statistics is called two times within one timestep
299    PA0191            unknown action(s): ...
300    PA0192            timestep has exceeded the lower limit dt_1d = ... s   
301                       simulation stopped!
302    PA0193            unknown initializing problem
303    PA0194            number of time series quantities exceeds its maximum
304                       of dots_max = ... Please increase dots_max in
305                       modules.f90.
306    PA0195            dvrp_username is undefined
307    PA0196            dvrp_output="..." not allowed
308    PA0197            dvrp_file="..." not allowed
309    PA0198            mode_dvrp="..." not allowed
310    PA0199            split of communicator not realized with  MPI1 coupling
311                       atmosphere-ocean'
312    PA0200            missing dz
313    PA0201            dz=... <= 0.0
314    PA0202            grid anisotropy exceeds threshold given by only local
315                       horizontal reduction of near_wall mixing length l_wall
316                       starting from height level k = ... .
317    PA0203            inconsistent building parameters: bxl=... bxr=... bys=...
318                       byn=... nx=... ny=...
319    PA0204            no street canyon width given
320    PA0205            inconsistent canyon parameters: cxl=... cxr=...
321                       cwx=... ch=... nx=... ny=...
322    PA0206            inconsistent canyon parameters:... cys=... cyn=...
323                       cwy=... ch=... nx=... ny=...
324    PA0207            inconsistent canyon parameters: street canyon can
325                       only be oriented either in x- or in y-direction
326    PA0208            file TOPOGRAPHY_DATA does not exist
327    PA0209            errors in file TOPOGRAPHY_DATA
328    PA0210            nzb_local values are outside the model domain
329                      MINVAL( nzb_local ) = ...
330                       MAXVAL( nzb_local ) = ...
331    PA0211            nzb_local does not fulfill cyclic boundary condition
332                       in x-direction
333    PA0212            nzb_local does not fulfill cyclic boundary condition
334                       in y-direction   
335    PA0213            max_number_of_particle_groups =...
336                       number_of_particle_groups reset to ...
337    PA0214            version mismatch concerning data from prior run
338                       version on file    = ...
339                       version in program = ...
340    PA0215            particle group # ...  has a density ratio /= 0
341                       but radius = 0
342    PA0216            number of initial particles (...) exceeds
343                       maximum_number_of_particles (...) on PE ...
344    PA0217            unknown boundary condition bc_par_b = "..."
345    PA0218            unknown boundary condition bc_par_t = "..."
346    PA0219            unknown boundary condition bc_par_lr = "..."
347    PA0220            unknown boundary condition bc_par_ns = "..."
348    PA0221            number of PEs of the prescribed topology (...) does not
349                       match the number of PEs available to the job ()
350    PA0222            if the processor topology is prescribed by the user,
351                       both values of "npex" and "npey" must be given
352                       in the NAMELIST-parameter file
353    PA0223            psolver = "poisfft_hybrid" can only be used in case of
354                       a 1d-decomposition along x
355    PA0224            no matching grid for transpositions found
356    PA0225            x-direction: gridpoint number (...)is not an
357                       integral divisor of the number of procesors (...)
358    PA0226            x-direction: nx does not match the requirements given
359                       by the number of PEs used
360                       please use nx = ... instead of nx =...
361    PA0227            y-direction: gridpoint number (...) is not an
362                       integral divisor of the number of processors (...)
363    PA0228            y-direction: ny does not match the requirements given
364                       by the number of PEs used
365                       please use ny = ... instead of ny =...
366    PA0229            1d-decomposition along x chosen but nz restrictions
367                       may occur since ups-scheme is activated
368    PA0230            transposition z --> x:
369                       nz=... is not an integral divisior of pdims(1)= ...
370    PA0231            transposition x --> y:
371                       nx+1=... is not an integral divisor of pdims(2)= ...
372    PA0232            transposition y --> z:
373                       ny+1=... is not an integral divisor of pdims(1)=...
374    PA0233            transposition x --> y:
375                       ny+1=... is not an integral divisor of pdims(1)=...
376    PA0234            direct transposition z --> y (needed for spectra):
377                       nz=... is not an integral divisor of pdims(2)=...
378    PA0235            mg_switch_to_pe0_level out of range and reset to
379                       default (=0)     
380    PA0236            not enough memory for storing gathered multigrid data
381                       on PE0
382    PA0237             multigrid gather/scatter impossible in non parallel mode
383    PA0238            more than 10 multigrid levels
384    PA0239            The value for "topography_grid_convention" is not set.
385                       Its default value is only valid for
386                       "topography" = ''single_building'',
387                       ''single_street_canyon'' or ''read_from_file''
388                       Choose ''cell_edge'' or ''cell_center''.
389    PA0240            The value for "topography_grid_convention" is not
390                       recognized. Choose ''cell_edge'' or ''cell_center''.
391    PA0241            netcdf_precision must contain a "_"
392                       netcdf_precision(...)="..."
393    PA0242            illegal netcdf precision: netcdf_precision( ...)="..."
394    PA0243            unknown variable in inipar assignment:
395                       netcdf_precision(', i, ')="..."
396    PA0244            no grid defined for variable ...
397    PA0245            NetCDF file for volume data ... from previuos run found,
398                       but this file cannot be extended due to variable
399                       mismatch.
400                       New file is created instead.
401    PA0246            NetCDF file for volume data ... from previuos run found,
402                       but this file cannot be extended due to mismatch in
403                       number of vertical grid points (nz_do3d).
404                       New file is created instead.
405    PA0247            NetCDF file for volume data ... from previuos run found,
406                       but this file cannot be extended because the current
407                       output time is less or equal than the last output time
408                       on this file. New file is created instead.
409    PA0248            NetCDF file for volume data ... from previous run found.
410                       This file will be extended.
411    PA0249            NetCDF file for cross-sections ... from previuos run
412                       found, but this file cannot be extended due to
413                       variable mismatch. New file is created instead.
414    PA0250            NetCDF file for cross-sections ... from previuos run
415                       found, but this file cannot be extended due to
416                       mismatch in  number of cross sections. New file
417                       is created instead.
418    PA0251            NetCDF file for cross-sections ... from previuos run
419                       found but this file cannot be extended due to mismatch
420                       in cross section levels. New file is created instead.
421    PA0252            NetCDF file for cross sections ... from previuos run
422                       found, but this file cannot be extended because the
423                       current output time is less or equal than the last
424                       output time on this file. New file is created instead.
425    PA0253            NetCDF file for cross-sections ... from previous run
426                       found. This file will be extended.
427    PA0254            NetCDF file for vertical profiles from previuos run
428                       found, but this file cannot be extended due to variable
429                       mismatch. New file is created instead.
430    PA0255            NetCDF file for vertical profiles from previuos run
431                       found, but this file cannot be extended because the
432                       current output time is less or equal than the last
433                       output time on this file. New file is created instead.
434    PA0256            NetCDF file for vertical profiles from previous run
435                       found. This file will be extended.
436    PA0257            NetCDF file for time series from previuos run found
437                       but this file cannot be extended due tovariable
438                       mismatch. New file is created instead.
439    PA0258            NetCDF file for time series from previuos run found,
440                       but this file cannot be extended because the current
441                       output time is less or equal than the last output time
442                       on this file. New file is created instead.
443    PA0259            NetCDF file for time series from previous run found.
444                       This file will be extended.
445    PA0260            NetCDF file for spectra from previuos run found,
446                       but this file cannot be extended due to variable
447                       mismatch. New file is created instead.
448    PA0261            NetCDF file for spectra from previuos run found,
449                       but this file cannot be extended due to mismatch in
450                       number of vertical levels. New file is created instead.
451    PA0262            NetCDF file for spectra from previuos run found,
452                       but this file cannot be extended due to mismatch in
453                       heights of vertical levels. New file is created instead.
454    PA0263            NetCDF file for spectra from previuos run found,
455                       but this file cannot be extended because the current
456                       output time is less or equal than the last output time
457                       on this file. New file is created instead.
458    PA0264            NetCDF file for spectra from previous run found.
459                       This file will be extended.
460    PA0265            NetCDF file for particles from previuos run found,
461                       but this file cannot be extended because the current
462                       output time is less or equal than the last output time
463                       on this file. New file is created instead.
464    PA0266            NetCDF file for particles from previous run found.
465                       This file will be extended.
466    PA0267            NetCDF file for particle time series from previuos run
467                       found, but this file cannot be extended due to
468                       variable mismatch. New file is created instead.
469    PA0268            NetCDF file for particle time series from previuos run
470                       found, but this file cannot be extended because the
471                       current output time is less or equal than the last
472                       output time on this file. New file is created instead.
473    PA0269            NetCDF file for particle time series from previous run
474                       found. This file will be extended.
475    PA0270            mode "..." not supported
476    PA0271            errors in \$inipar &or no \$inipar-namelist found
477                       (CRAY-machines only)
478    PA0272            no \$inipar-namelist found
479    PA0273            no value or wrong value given for nx: nx=...
480    PA0274            no value or wrong value given for ny: ny=...
481    PA0275            no value or wrong value given for nz: nz=...
482    PA0276            local file ENVPAR not found
483                       some variables for steering may not be properly set
484    PA0277            errors in local file ENVPAR
485                       some variables for steering may not be properly set
486    PA0278            no envpar-NAMELIST found in local file ENVPAR
487                      some variables for steering may not be properly set
488    PA0279            wrong component: ...
489    PA0280            Number of OpenMP threads = ...
490    PA0281            running optimized multinode version
491                       switch_per_lpar        = ...
492                       tasks_per_lpar         = ...
493                       tasks_per_logical_node = ...
494    PA0282            parallel environment (MPI) required
495    PA0283            no sufficient convergence within 1000 cycles
496    PA0284            data from subdomain of previous run mapped more
497                       than 1000 times
498    PA0285            number of PEs or virtual PE-grid changed in restart run
499                       PE ... will read from files ...
500    PA0286            version mismatch concerning data from prior run
501                       version on file    = "..."
502                       version in program = "..."
503    PA0287            problem with index bound nxl on restart file "..."
504                       nxl = ... but it should be = ... from the index bound
505                       information array
506    PA0288            problem with index bound nxr on restart file "..."
507                       nxr = ... but it should be = ... from the index bound
508                       information array
509    PA0289            problem with index bound nys on restart file "..."
510                       nys = .. but it should be = ... from the index bound
511                       information array 
512    PA0290            problem with index bound nyn on restart file "..."
513                       nyn = ... but it should be = ... from the index bound
514                       information array
515    PA0291            mismatch between actual data and data
516                       from prior run on PE ...
517                       nzb on file = ...
518                       nzb         = ...
519    PA0292            mismatch between actual data and data
520                       from prior run on PE ...
521                       nzt on file = ...
522                       nzt         = ...
523    PA0293            read_3d_binary: spectrum_x
524                       on restart file ignored because total numbers of
525                       grid points (nx) do not match
526    PA0294            read_3d_binary: spectrum_y
527                       on restart file ignored because total numbers of
528                       grid points (ny) do not match
529    PA0295            unknown field named "..." found in data from
530                       prior run on PE ...
531    PA0296            version mismatch concerning control variables
532                       version on file    = "..."
533                       version on program = "..."
534    PA0297            numprocs not found in data from prior run on PE ...
535    PA0298            hor_index_bounds not found in data from prior
536                       run on PE ...
537    PA0299            nz not found in data from prior run on PE ...
538    PA0300            max_pr_user not found in data from prior run on PE ...
539    PA0301            statistic_regions not found in data from prior
540                       run on PE ...
541    PA0302            unknown variable named "..." found in data from
542                       prior run on PE ... 
543    PA0303            nz not found in restart data file
544    PA0304            mismatch concerning number of gridpoints along z
545                       nz on file    = "..."
546                       nz from run   = "..."
547    PA0305            max_pr_user not found in restart data file
548    PA0306            number of user profiles on restart data file differs
549                       from the current run
550                       max_pr_user on file    = "..."
551                       max_pr_user from run   = "..."
552    PA0307            statistic_regions not found in restart data file
553    PA0308            statistic regions on restart data file differ
554                       from the current run
555                       statistic regions on file    = "..."
556                       statistic regions from run   = "..."
557                      statistic data may be lost!
558    PA0309            inflow profiles not temporally averaged.
559                       Averaging will be done now using ... samples. 
560    PA0310            remote model "..." terminated with
561                       terminate_coupled_remote = ...
562                       local model  "..." has terminate_coupled = ...
563    PA0311            number of gridpoints along x or/and y contain illegal 
564                       factors only factors 8,6,5,4,3,2 are allowed
565    PA0312            Time step has reached minimum limit.
566                       dt      = ... s  Simulation is terminated.
567                       old_dt  = ... s                           
568                       dt_u    = ... s                             
569                       dt_v    = ... s                           
570                       dt_w    = ... s                             
571                       dt_diff = ... s                         
572                       u_max   = ... m/s   k=... j=...  i=...           
573                       v_max   = ... m/s   k=... j=...  i=...           
574                       w_max   = ... m/s   k=... j=...  i=...
575    PA0313            illegal value for parameter particle_color: ...
576    PA0314            illegal value for parameter particle_dvrpsize: ...
577    PA0315            color_interval(2) <= color_interval(1)
578    PA0316            dvrpsize_interval(2) <= dvrpsize_interval(1)
579   
580
581    UI0001            unknown location "..."
582    UI0002            location "..." is not allowed to be called with
583                       parameters "i" and "j"
584    UI0003            no output possible for: ...
585    UI0004            unknown mode "..."
586    UI0005            topography "..." not available yet
587    UI0006            unknown topography "..."
588    UI0007            canopy_mode "..." not available yet
589    UI0008            unknown canopy_mode "..."
590    UI0009            the number of user-defined profiles given in
591                       data_output_pr (...) does not match the one
592                       found in the restart file (...)
593    UI0010            Spectra of ... can not be calculated
594    UI0011            Spectra of ... are not defined
595    UI0012            unknown variable named "..." found in data from prior
596                       run on PE
597   
598
599
600   internal assigned error numbers (errno) for the call of the subroutine
601   "handle_netcdf_error":
602
603    assigned               free
604       1 -  375             376
605     377 -  428             386
606    1009 - 1010
Note: See TracBrowser for help on using the repository browser.