source: palm/trunk/DOC/tec/message_identifiers @ 247

Last change on this file since 247 was 247, checked in by heinze, 13 years ago

Output of messages replaced by message handling routin

File size: 16.9 KB
Line 
1 List of message identifiers used in PALM message handling routine "message"
2
3    PA****  Identifier for messages in the PALM standard code
4    UI****  Identifier for messages in "user_" routines
5
6message_identifier   message string
7    PA0001            "host" is not set. Please check that environment
8                        variable "localhost" is set before running PALM
9    PA0002            illegal coupling mode: ...
10    PA0003            dt_coupling is  not set but required for coupling
11                       mode "..."
12    PA0004            coupling mode "...": dt_coupling = ... is not equal
13                       to dt_coupling_remote = ...       
14    PA0005            coupling mode "...": dt_coupling <= 0.0 is not allowed
15                       and is reset to MAX(dt_max(A,O)) = ...
16    PA0006            coupling mode "...": restart_time = ... is not equal
17                       to restart_time_remote = ...
18    PA0007            coupling mode "...": dt_restart = ... is not equal
19                       to dt_restart_remote = ...
20    PA0008            coupling mode "...": end_time = ... is not equal to
21                       end_time_remote = ...
22    PA0009            coupling mode "...":  dx = ... is not equal to
23                       dx_remote = ...
24    PA0010            coupling mode "...":  dy = ... is not equal to
25                       dy_remote = ...
26    PA0011            coupling mode "...": nx = ... is not equal to
27                       nx_remote = ...
28    PA0012            coupling mode "...": ny = ... is not equal to
29                       ny_remote = ...
30    PA0013            illegal value given for loop_optimization: "..."
31    PA0014            a non-flat topography does not allow ...
32    PA0015            ocean = .T. does not allow ...
33    PA0016            unknown solver for perturbation pressure:
34                       psolver = "..."
35    PA0017            psolver = "..." only works for a
36                       1d domain-decomposition along x
37                      please do not set npey/=1 in the parameter file'
38    PA0018            psolver = ".." does not work for subdomains with
39                       unequal size please set grid_matching = ''strict''
40                       in the parameter file
41    PA0019            psolver = "..." only works for a parallel environment
42    PA0020            unknown multigrid cycle: cycle_mg = "..."
43    PA0021            unknown fft-algorithm: fft_method = "..."
44    PA0022            unknown advection scheme: momentum_advec = "..."
45    PA0023            momentum_advec = "..." is not allowed with
46                       timestep_scheme = "..."
47    PA0024            unknown advection scheme: scalar_advec = "..."
48    PA0025            use_upstream_for_tke set .TRUE. because
49                       use_sgs_for_particles = .TRUE.
50    PA0026            use_upstream_for_tke = .TRUE. not allowed with
51                       timestep_scheme = "..."
52    PA0027            unknown timestep scheme: timestep_scheme = "..."
53    PA0028            scalar advection scheme "..." does not work with
54                       timestep_scheme ".."
55    PA0029            momentum advection scheme "..." does not work with
56                       timestep_scheme "..."
57    PA0030            initializing_action = "..." unkown or not allowed
58    PA0031            initializing_actions = "set_constant_profiles" and
59                       "set_1d-model_profiles" are not allowed simultaneously
60    PA0032            initializing_actions = "set_constant_profiles" and
61                       "by_user" are not allowed simultaneously
62    PA0033            initializing_actions = "by_user" and 
63                       "set_1d-model_profiles" are not allowed simultaneously
64    PA0034            cloud_physics = ... is not allowed with humidity = ...
65    PA0035            precipitation = ... is not allowed with
66                       cloud_physics = ...
67    PA0036            humidity = .TRUE. and sloping_surface = .TRUE. are not
68                       allowed simultaneously
69    PA0037            UPS-scheme is not implemented for humidity = .TRUE.
70    PA0038            humidity = .TRUE. and passive_scalar = .TRUE. is not
71                       allowed simultaneously'
72    PA0039            UPS-scheme is not implemented for passive_scalar = .TRUE.
73    PA0040            illegal value "..." found for parameter grid_matching
74    PA0041            plant_canopy = .TRUE. requires a non-zero
75                       drag coefficient given value is drag_coefficient = 0.0
76    PA0042            use_top_fluxes must be .TRUE. in ocean version
77    PA0043            ABS( alpha_surface = ... ) must be < 90.0
78    PA0044            dt = ', dt , ' <= 0.0
79    PA0045            cfl_factor = ...  out of range
80                       0.0 < cfl_factor <= 1.0 is required
81    PA0046            baroclinicity (ug) not allowed simultaneously with
82                       galilei transformation
83    PA0047            baroclinicity (vg) not allowed simultaneously with
84                       galilei transformation
85    PA0048            variable translation speed used for
86                       galilei-transformation, which may cause instabilities
87                       in stably stratified regions
88    PA0049            unknown boundary condition: bc_lr = "..."
89    PA0050            unknown boundary condition: bc_ns = "..."
90    PA0051            non-cyclic lateral boundaries do not
91                       allow psolver = "..."
92    PA0052            non-cyclic lateral boundaries do not allow
93                       momentum_advec = "..."
94    PA0053            non-cyclic lateral boundaries do not allow
95                       scalar_advec = "..."
96    PA0054            non-cyclic lateral boundaries do not allow
97                       galilei_transformation = .T.
98    PA0055            adjust_mixing_length = TRUE and bc_e_b = "neumann"
99    PA0056            adjust_mixing_length = FALSE and bc_e_b = "..."
100    PA0057            boundary condition bc_e_b changed to "..."
101    PA0058            unknown boundary condition: bc_e_b = "..."
102    PA0059            unknown boundary condition: bc_p_b = "..."
103    PA0060            boundary condition: bc_p_b = "..." not allowed with
104                       prandtl_layer = .FALSE.'
105    PA0061            unknown boundary condition: bc_p_t = "..."
106    PA0062            unknown boundary condition: bc_pt_b = "..."
107    PA0063            unknown boundary condition: bc_pt_t = "..."
108    PA0064            both, top_momentumflux_u AND top_momentumflux_v
109                       must be set
110    PA0065            boundary_condition: bc_pt_b = "..." is not allowed
111                       with constant_heatflux = .TRUE.
112    PA0066            constant_heatflux = .TRUE. is not allowed with
113                       pt_surface_initial_change (/=0) = ...
114    PA0067            boundary_condition: bc_pt_t = "..." is not allowed
115                       with constant_top_heatflux = .TRUE.
116    PA0068            unknown boundary condition: bc_sa_t = "..."
117    PA0069            boundary condition: bc_sa_t = "..." requires to set
118                       top_salinityflux
119    PA0070            boundary condition: bc_sa_t = "..." is not allowed
120                       with constant_top_salinityflux = .TRUE.'
121    PA0071            unknown boundary condition: bc_..._b ="..."
122    PA0072            unknown boundary condition: bc_..._t ="..."
123    PA0073            boundary condition: bc_..._b = "..." is not allowed
124                       with prescribed surface flux
125    PA0074            a prescribed surface flux is not allowed
126                       with ..._surface_initial_change (/=0) = ...
127    PA0075            boundary condition: bc_uv_b = "..." is not allowed
128                       with prandtl_layer = .TRUE.
129    PA0076            unknown boundary condition: bc_uv_b = "..."
130    PA0077            unknown boundary condition: bc_uv_t = "..."
131    PA0078            rayleigh_damping_factor = ... out of range [0.0,1.0]
132    PA0079            rayleigh_damping_height = ... out of range [0.0, ...]
133    PA0080            overshoot_limit_... < 0.0 is not allowed
134    PA0081            ups_limit_... < 0.0 is not allowed
135    PA0082            number of statistic_regions = ...  but only
136                      10 regions are allowed
137    PA0083            normalizing_region = ... must be >= 0 and <= ... (value
138                       of statistic_regions)
139    PA0084            dt_sort_particles is reset to 0.0 because of
140                       cloud_droplets = .TRUE.
141    PA0085            averaging_interval = ...  must be <= dt_data_output = ...
142    PA0086            averaging_interval_pr = ...  must be <= dt_dopr = ...
143    PA0087            averaging_interval_sp = ...  must be <= dt_dosp = ...
144    PA0088            dt_averaging_input = ...  must
145                       be <= averaging_interval = ...
146    PA0089            dt_averaging_input_pr = ...  must be
147                       <= averaging_interval_pr = ...
148    PA0090            precipitation_amount_interval = ...  must not be
149                       larger than dt_do2d_xy = ...
150    PA0091            data_output_pr = ...  is not implemented for
151                       ocean = .FALSE.'
152    PA0092            data_output_pr = ... is not implemented for
153                       humidity = .FALSE.'
154    PA0093            data_output_pr = ... is not implemented for
155                       passive_scalar = .FALSE.'
156    PA0094            data_output_pr = ... is not implemented for
157                       cloud_physics = .FALSE.'
158    PA0095            data_output_pr = ... is not implemented for
159                       cloud_physics = .FALSE. and humidity = .FALSE.
160    PA0096            data_output_pr = ... is not implemented for
161                       cloud_physics = .FALSE. or cloud_droplets = .FALSE.
162    PA0097            illegal value for data_output_pr or
163                       data_output_pr_user = "..."       
164    PA0098            illegal value for data_output_pr = "..."
165    PA0099            z_max_do1d = ...  must be >= ... or <= ...
166    PA0100            unknown normalization method cross_normalized_x = "..."
167    PA0101            unknown normalization method cross_normalized_y = "..."
168    PA0102            number of output quantitities given by data_output
169                       and data_output_user exceeds the limit of 100
170    PA0103            output of "..." requires constant_diffusion = .FALSE.
171    PA0104           output of "..." requires a "particles_par"-NAMELIST
172                      in the parameter file (PARIN)
173    PA0105           output of "..." requires humidity = .TRUE.
174    PA0106           output of "" requires cloud_physics = .TRUE. or
175                      cloud_droplets = .TRUE.'
176    PA0107           output of "..." requires cloud_droplets = .TRUE.
177    PA0108           output of "..." requires cloud_physics = .TRUE.
178    PA0109           output of "..." requires ocean = .TRUE.
179    PA0110           output of "..." requires passive_scalar = .TRUE.
180    PA0111           illegal value for data_output: "..." only
181                      2d-horizontal cross sections are allowed for this value
182    PA0112           output of "..." requires precipitation = .TRUE.
183    PA0113           temporal averaging of precipitation amount "..."
184                      is not possible'       
185    PA0114           illegal value for data_output or data_output_user = "..."
186    PA0115           illegal value for data_output = "..."
187    PA0116           z_max_do2d = ', z_max_do2d must be >= ... (zu(nzb+1))
188                      and <= ... (zu(nzt))
189    PA0117           do3d_compress = .TRUE. not allowed on host ""
190    PA0118           illegal precision: do3d_comp_prec ( ...) = "..."
191    PA0119           unknown variable "..." given for do3d_comp_prec(...)   
192    PA0120           unknown value for data_output_format "..."
193    PA0121           km_constant = ... < 0.0
194    PA0122           prandtl_number = ... < 0.0
195    PA0123           prandtl_layer is not allowed with fixed value of km
196    PA0124           outflow_damping width out of range
197    PA0125           rif_min = ...  must be less than rif_max = ...
198    PA0126           disturbance_level_b = ... must be >= ... (zu(3))
199    PA0127           disturbance_level_b = ... must be <= ... (zu(nzt-2))
200    PA0128           disturbance_level_t = ... must be <= ... (zu(nzt-2))
201    PA0129           disturbance_level_t = ... must
202                      be >= disturbance_level_b = ...
203    PA0130           disturbance_level_ind_t =...  must
204                      be >= disturbance_level_b = ...
205    PA0131           inflow_disturbance_begin out of range
206    PA0132           inflow_disturbance_end out of range
207    PA0133           turbulent_inflow = .T. requires a Dirichlet
208                      condition at the inflow boundary
209    PA0134           illegal value for recycling_width: ...
210    PA0135           unknown random generator: random_generator = "..."
211    PA0136           damp_level_1d = ...  must be > 0.0 and < ... (zu(nzt+1))
212    PA0137           mixing_length_1d = "..." is unknown
213    PA0138           dissipation_1d = "..." is unknown
214    PA0139           termination_time_needed = ...  must be > 30.0 on host ..."
215    PA0140           termination_time_needed = ... should be >= 300.0
216                      on host "..."     
217    PA0141           coupling requires PALM to be called with
218                      ''mrun -K parallel''
219    PA0142           absolute temperature < 0.0 at zu(...) = ...
220    PA0143           k=... j=... i=... ql_c=... part(...)%wf=... 
221                      delta_r=...
222    PA0144           #1 k=... j=... i=... e_s=...  e_a=... t_int=...
223                      d_radius=... delta_r=... particle_radius=... 
224    PA0145           collision_efficiency out of range: ...
225    PA0146           maximum_number_of_particles needs to be increased
226                      but this is not allowed with NetCDF output switched on
227    PA0147           maximum_number_of_tails needs to be increased
228                      but this is not allowed with NetCDF output switched on
229    PA0148           particle too fast.  n = ...
230    PA0149           particle out of range: i=... j=... k=...
231                      nxl=... nxr=... nys=... nyn=... nzb=... nzt=...
232    PA0150           Both dp_external and conserve_volume_flow are .TRUE.
233                      but one of them must be .FALSE.
234    PA0151           dp_level_b = ... is out of range
235    PA0152           dp_external is .TRUE. but dpdxy is zero, i.e. the external
236                      pressure gradient will not be applied
237    PA0153           dpdxy is nonzero but dp_external is .FALSE., i.e. the
238                      external pressure gradient will not be applied
239    PA0154           unknown conserve_volume_flow_mode: ...
240    PA0155           noncyclic boundary conditions require
241                      conserve_volume_flow_mode = ''inflow_profile''
242    PA0156           cyclic boundary conditions require conserve_volume_flow_mode =
243                      ''initial_profiles'' or ''bulk_velocity''
244                      requires noncyclic boundary conditions
245    PA0157           nonzero bulk velocity requires conserve_volume_flow = .T. and
246                      conserve_volume_flow_mode = ''bulk_velocity''
247    PA0158           no vertical boundary condition for variable "..."
248    PA0159           no term for component "..."
249    PA0160           non-cyclic lateral boundaries along x do not allow
250                      calculation of spectra along x
251    PA0161           sorry, calculation of spectra in non parallel mode is
252                      still not realized
253    PA0162           non-cyclic lateral boundaries along y do not allow
254                      calculation of spectra along y
255    PA0163           run will be terminated because it is running out of
256                      job cpu limit remaining time: ... s
257                      termination time needed: ... s
258    PA0164           run will be terminated due to user settings of
259                      restart_time / dt_restart new restart time is: ... s
260    PA0165           re-open of unit 14 is not verified. Please check results!
261    PA0166           re-opening of file-id ... is not allowed
262    PA0167           opening file-id ... not allowed for PE ...
263    PA0168           opening file-id ... is not allowed since it is used otherwise
264    PA0169           no filename for AVS-data-file found in MRUN-config-file
265                      filename in FLD-file set to "unknown"
266    PA0170           no path for batch_scp on host "..." 
267    PA0171           NetCDF: no 64-bit offset allowed on this machine
268    PA0172           no OPEN-statement for file-id ...
269
270    UI0001           The value for "topography_grid_convention" is not set.
271                      Its default value is only valid for
272                      "topography" = ''single_building'',
273                      ''single_street_canyon'' or ''read_from_file''
274                      Choose ''cell_edge'' or ''cell_center''.
275    UI0002           The value for "topography_grid_convention" is not
276                      recognized. Choose ''cell_edge'' or ''cell_center''.
Note: See TracBrowser for help on using the repository browser.