source: palm/trunk/DOC/tec/message_identifiers @ 258

Last change on this file since 258 was 258, checked in by heinze, 16 years ago

Output of messages replaced by message handling routine.

File size: 36.0 KB
Line 
1 List of message identifiers used in PALM message handling routine "message"
2
3    PA****  Identifier for messages in the PALM standard code
4    UI****  Identifier for messages in "user_" routines
5
6message_identifier   message string
7    PA0001            "host" is not set. Please check that environment
8                        variable "localhost" is set before running PALM
9    PA0002            illegal coupling mode: ...
10    PA0003            dt_coupling is  not set but required for coupling
11                       mode "..."
12    PA0004            coupling mode "...": dt_coupling = ... is not equal
13                       to dt_coupling_remote = ...       
14    PA0005            coupling mode "...": dt_coupling <= 0.0 is not allowed
15                       and is reset to MAX(dt_max(A,O)) = ...
16    PA0006            coupling mode "...": restart_time = ... is not equal
17                       to restart_time_remote = ...
18    PA0007            coupling mode "...": dt_restart = ... is not equal
19                       to dt_restart_remote = ...
20    PA0008            coupling mode "...": end_time = ... is not equal to
21                       end_time_remote = ...
22    PA0009            coupling mode "...":  dx = ... is not equal to
23                       dx_remote = ...
24    PA0010            coupling mode "...":  dy = ... is not equal to
25                       dy_remote = ...
26    PA0011            coupling mode "...": nx = ... is not equal to
27                       nx_remote = ...
28    PA0012            coupling mode "...": ny = ... is not equal to
29                       ny_remote = ...
30    PA0013            illegal value given for loop_optimization: "..."
31    PA0014            a non-flat topography does not allow ...
32    PA0015            ocean = .T. does not allow ...
33    PA0016            unknown solver for perturbation pressure:
34                       psolver = "..."
35    PA0017            psolver = "..." only works for a
36                       1d domain-decomposition along x
37                      please do not set npey/=1 in the parameter file'
38    PA0018            psolver = ".." does not work for subdomains with
39                       unequal size please set grid_matching = ''strict''
40                       in the parameter file
41    PA0019            psolver = "..." only works for a parallel environment
42    PA0020            unknown multigrid cycle: cycle_mg = "..."
43    PA0021            unknown fft-algorithm: fft_method = "..."
44    PA0022            unknown advection scheme: momentum_advec = "..."
45    PA0023            momentum_advec = "..." is not allowed with
46                       timestep_scheme = "..."
47    PA0024            unknown advection scheme: scalar_advec = "..."
48    PA0025            use_upstream_for_tke set .TRUE. because
49                       use_sgs_for_particles = .TRUE.
50    PA0026            use_upstream_for_tke = .TRUE. not allowed with
51                       timestep_scheme = "..."
52    PA0027            unknown timestep scheme: timestep_scheme = "..."
53    PA0028            scalar advection scheme "..." does not work with
54                       timestep_scheme ".."
55    PA0029            momentum advection scheme "..." does not work with
56                       timestep_scheme "..."
57    PA0030            initializing_action = "..." unkown or not allowed
58    PA0031            initializing_actions = "set_constant_profiles" and
59                       "set_1d-model_profiles" are not allowed simultaneously
60    PA0032            initializing_actions = "set_constant_profiles" and
61                       "by_user" are not allowed simultaneously
62    PA0033            initializing_actions = "by_user" and 
63                       "set_1d-model_profiles" are not allowed simultaneously
64    PA0034            cloud_physics = ... is not allowed with humidity = ...
65    PA0035            precipitation = ... is not allowed with
66                       cloud_physics = ...
67    PA0036            humidity = .TRUE. and sloping_surface = .TRUE. are not
68                       allowed simultaneously
69    PA0037            UPS-scheme is not implemented for humidity = .TRUE.
70    PA0038            humidity = .TRUE. and passive_scalar = .TRUE. is not
71                       allowed simultaneously'
72    PA0039            UPS-scheme is not implemented for passive_scalar = .TRUE.
73    PA0040            illegal value "..." found for parameter grid_matching
74    PA0041            plant_canopy = .TRUE. requires a non-zero
75                       drag coefficient given value is drag_coefficient = 0.0
76    PA0042            use_top_fluxes must be .TRUE. in ocean version
77    PA0043            ABS( alpha_surface = ... ) must be < 90.0
78    PA0044            dt = ', dt , ' <= 0.0
79    PA0045            cfl_factor = ...  out of range
80                       0.0 < cfl_factor <= 1.0 is required
81    PA0046            baroclinicity (ug) not allowed simultaneously with
82                       galilei transformation
83    PA0047            baroclinicity (vg) not allowed simultaneously with
84                       galilei transformation
85    PA0048            variable translation speed used for
86                       galilei-transformation, which may cause instabilities
87                       in stably stratified regions
88    PA0049            unknown boundary condition: bc_lr = "..."
89    PA0050            unknown boundary condition: bc_ns = "..."
90    PA0051            non-cyclic lateral boundaries do not
91                       allow psolver = "..."
92    PA0052            non-cyclic lateral boundaries do not allow
93                       momentum_advec = "..."
94    PA0053            non-cyclic lateral boundaries do not allow
95                       scalar_advec = "..."
96    PA0054            non-cyclic lateral boundaries do not allow
97                       galilei_transformation = .T.
98    PA0055            adjust_mixing_length = TRUE and bc_e_b = "neumann"
99    PA0056            adjust_mixing_length = FALSE and bc_e_b = "..."
100    PA0057            boundary condition bc_e_b changed to "..."
101    PA0058            unknown boundary condition: bc_e_b = "..."
102    PA0059            unknown boundary condition: bc_p_b = "..."
103    PA0060            boundary condition: bc_p_b = "..." not allowed with
104                       prandtl_layer = .FALSE.'
105    PA0061            unknown boundary condition: bc_p_t = "..."
106    PA0062            unknown boundary condition: bc_pt_b = "..."
107    PA0063            unknown boundary condition: bc_pt_t = "..."
108    PA0064            both, top_momentumflux_u AND top_momentumflux_v
109                       must be set
110    PA0065            boundary_condition: bc_pt_b = "..." is not allowed
111                       with constant_heatflux = .TRUE.
112    PA0066            constant_heatflux = .TRUE. is not allowed with
113                       pt_surface_initial_change (/=0) = ...
114    PA0067            boundary_condition: bc_pt_t = "..." is not allowed
115                       with constant_top_heatflux = .TRUE.
116    PA0068            unknown boundary condition: bc_sa_t = "..."
117    PA0069            boundary condition: bc_sa_t = "..." requires to set
118                       top_salinityflux
119    PA0070            boundary condition: bc_sa_t = "..." is not allowed
120                       with constant_top_salinityflux = .TRUE.'
121    PA0071            unknown boundary condition: bc_..._b ="..."
122    PA0072            unknown boundary condition: bc_..._t ="..."
123    PA0073            boundary condition: bc_..._b = "..." is not allowed
124                       with prescribed surface flux
125    PA0074            a prescribed surface flux is not allowed
126                       with ..._surface_initial_change (/=0) = ...
127    PA0075            boundary condition: bc_uv_b = "..." is not allowed
128                       with prandtl_layer = .TRUE.
129    PA0076            unknown boundary condition: bc_uv_b = "..."
130    PA0077            unknown boundary condition: bc_uv_t = "..."
131    PA0078            rayleigh_damping_factor = ... out of range [0.0,1.0]
132    PA0079            rayleigh_damping_height = ... out of range [0.0, ...]
133    PA0080            overshoot_limit_... < 0.0 is not allowed
134    PA0081            ups_limit_... < 0.0 is not allowed
135    PA0082            number of statistic_regions = ...  but only
136                      10 regions are allowed
137    PA0083            normalizing_region = ... must be >= 0 and <= ... (value
138                       of statistic_regions)
139    PA0084            dt_sort_particles is reset to 0.0 because of
140                       cloud_droplets = .TRUE.
141    PA0085            averaging_interval = ...  must be <= dt_data_output = ...
142    PA0086            averaging_interval_pr = ...  must be <= dt_dopr = ...
143    PA0087            averaging_interval_sp = ...  must be <= dt_dosp = ...
144    PA0088            dt_averaging_input = ...  must
145                       be <= averaging_interval = ...
146    PA0089            dt_averaging_input_pr = ...  must be
147                       <= averaging_interval_pr = ...
148    PA0090            precipitation_amount_interval = ...  must not be
149                       larger than dt_do2d_xy = ...
150    PA0091            data_output_pr = ...  is not implemented for
151                       ocean = .FALSE.'
152    PA0092            data_output_pr = ... is not implemented for
153                       humidity = .FALSE.'
154    PA0093            data_output_pr = ... is not implemented for
155                       passive_scalar = .FALSE.'
156    PA0094            data_output_pr = ... is not implemented for
157                       cloud_physics = .FALSE.'
158    PA0095            data_output_pr = ... is not implemented for
159                       cloud_physics = .FALSE. and humidity = .FALSE.
160    PA0096            data_output_pr = ... is not implemented for
161                       cloud_physics = .FALSE. or cloud_droplets = .FALSE.
162    PA0097            illegal value for data_output_pr or
163                       data_output_pr_user = "..."       
164    PA0098            illegal value for data_output_pr = "..."
165    PA0099            z_max_do1d = ...  must be >= ... or <= ...
166    PA0100            unknown normalization method cross_normalized_x = "..."
167    PA0101            unknown normalization method cross_normalized_y = "..."
168    PA0102            number of output quantitities given by data_output
169                       and data_output_user exceeds the limit of 100
170    PA0103            output of "..." requires constant_diffusion = .FALSE.
171    PA0104            output of "..." requires a "particles_par"-NAMELIST
172                       in the parameter file (PARIN)
173    PA0105            output of "..." requires humidity = .TRUE.
174    PA0106            output of "" requires cloud_physics = .TRUE. or
175                       cloud_droplets = .TRUE.'
176    PA0107            output of "..." requires cloud_droplets = .TRUE.
177    PA0108            output of "..." requires cloud_physics = .TRUE.
178    PA0109            output of "..." requires ocean = .TRUE.
179    PA0110            output of "..." requires passive_scalar = .TRUE.
180    PA0111            illegal value for data_output: "..." only
181                       2d-horizontal cross sections are allowed for this value
182    PA0112            output of "..." requires precipitation = .TRUE.
183    PA0113            temporal averaging of precipitation amount "..."
184                       is not possible'       
185    PA0114            illegal value for data_output or data_output_user = "..."
186    PA0115            illegal value for data_output = "..."
187    PA0116            z_max_do2d = ', z_max_do2d must be >= ... (zu(nzb+1))
188                       and <= ... (zu(nzt))
189    PA0117            do3d_compress = .TRUE. not allowed on host ""
190    PA0118            illegal precision: do3d_comp_prec ( ...) = "..."
191    PA0119            unknown variable "..." given for do3d_comp_prec(...)   
192    PA0120            unknown value for data_output_format "..."
193    PA0121            km_constant = ... < 0.0
194    PA0122            prandtl_number = ... < 0.0
195    PA0123            prandtl_layer is not allowed with fixed value of km
196    PA0124            outflow_damping width out of range
197    PA0125            rif_min = ...  must be less than rif_max = ...
198    PA0126            disturbance_level_b = ... must be >= ... (zu(3))
199    PA0127            disturbance_level_b = ... must be <= ... (zu(nzt-2))
200    PA0128            disturbance_level_t = ... must be <= ... (zu(nzt-2))
201    PA0129            disturbance_level_t = ... must
202                       be >= disturbance_level_b = ...
203    PA0130            disturbance_level_ind_t =...  must
204                       be >= disturbance_level_b = ...
205    PA0131            inflow_disturbance_begin out of range
206    PA0132            inflow_disturbance_end out of range
207    PA0133            turbulent_inflow = .T. requires a Dirichlet
208                       condition at the inflow boundary
209    PA0134            illegal value for recycling_width: ...
210    PA0135            unknown random generator: random_generator = "..."
211    PA0136            damp_level_1d = ...  must be > 0.0 and < ... (zu(nzt+1))
212    PA0137            mixing_length_1d = "..." is unknown
213    PA0138            dissipation_1d = "..." is unknown
214    PA0139            termination_time_needed = ...  must be > 30.0 on host ..."
215    PA0140            termination_time_needed = ... should be >= 300.0
216                       on host "..."     
217    PA0141            coupling requires PALM to be called with
218                       ''mrun -K parallel''
219    PA0142            absolute temperature < 0.0 at zu(...) = ...
220    PA0143            k=... j=... i=... ql_c=... part(...)%wf=... 
221                       delta_r=...
222    PA0144            #1 k=... j=... i=... e_s=...  e_a=... t_int=...
223                       d_radius=... delta_r=... particle_radius=... 
224    PA0145            collision_efficiency out of range: ...
225    PA0146            maximum_number_of_particles needs to be increased
226                       but this is not allowed with NetCDF output switched on
227    PA0147            maximum_number_of_tails needs to be increased
228                       but this is not allowed with NetCDF output switched on
229    PA0148            particle too fast.  n = ...
230    PA0149            particle out of range: i=... j=... k=...
231                       nxl=... nxr=... nys=... nyn=... nzb=... nzt=...
232    PA0150            Both dp_external and conserve_volume_flow are .TRUE.
233                       but one of them must be .FALSE.
234    PA0151            dp_level_b = ... is out of range
235    PA0152            dp_external is .TRUE. but dpdxy is zero, i.e. the external
236                       pressure gradient will not be applied
237    PA0153            dpdxy is nonzero but dp_external is .FALSE., i.e. the
238                       external pressure gradient will not be applied
239    PA0154            unknown conserve_volume_flow_mode: ...
240    PA0155            noncyclic boundary conditions require
241                       conserve_volume_flow_mode = ''inflow_profile''
242    PA0156            cyclic boundary conditions require conserve_volume_flow_mode =
243                       ''initial_profiles'' or ''bulk_velocity''
244                       requires noncyclic boundary conditions
245    PA0157            nonzero bulk velocity requires conserve_volume_flow = .T. and
246                       conserve_volume_flow_mode = ''bulk_velocity''
247    PA0158            no vertical boundary condition for variable "..."
248    PA0159            no term for component "..."
249    PA0160            non-cyclic lateral boundaries along x do not allow
250                       calculation of spectra along x
251    PA0161            sorry, calculation of spectra in non parallel mode is
252                       still not realized
253    PA0162            non-cyclic lateral boundaries along y do not allow
254                       calculation of spectra along y
255    PA0163            run will be terminated because it is running out of
256                       job cpu limit remaining time: ... s
257                       termination time needed: ... s
258    PA0164            run will be terminated due to user settings of
259                       restart_time / dt_restart new restart time is: ... s
260    PA0165            re-open of unit 14 is not verified. Please check results!
261    PA0166            re-opening of file-id ... is not allowed
262    PA0167            opening file-id ... not allowed for PE ...
263    PA0168            opening file-id ... is not allowed since it is used otherwise
264    PA0169            no filename for AVS-data-file found in MRUN-config-file
265                       filename in FLD-file set to "unknown"
266    PA0170            no path for batch_scp on host "..." 
267    PA0171            NetCDF: no 64-bit offset allowed on this machine
268    PA0172            no OPEN-statement for file-id ...
269    PA0173            wrong component: ...
270    PA0174            wrong argument  expected: ... given: ...
271    PA0175            no time measurement defined on this host
272    PA0176            negative time interval occured
273                       PE ... L=PAUSE "..." new=...  last=...
274    PA0177            negative time interval occured
275                       PE ... L=STOP "..." new=... last=... isum=...
276    PA0178            negative time interval occured
277                       PE ... L=STOP "..." sum=...  mtime=...
278    PA0179            unknown modus of time measurement: ...
279    PA0180            unknown cross-section: ...
280    PA0181            no output provided for: ...
281    PA0182            no output available for: ...
282    PA0183            if humidity/passive_scalar = FALSE output of ...
283                       is not provided
284    PA0184            if cloud_physics = FALSE output of ... is not provided
285    PA0185            data_output_profiles: normalizing cross ...
286                       is not possible since one of the normalizing factors is zero!
287                       cross_normx_factor(...,...) = ...
288                       cross_normy_factor(...,...) = ...
289    PA0186            no spectra data available
290    PA0187            fft method "..." currently does not work on NEC
291    PA0188            no system-specific fft-call available
292    PA0189            fft method "..." not available
293    PA0190            flow_statistics is called two times within one timestep
294    PA0191            unknown action(s): ...
295    PA0192            timestep has exceeded the lower limit dt_1d = ... s   
296                       simulation stopped!
297    PA0193            unknown initializing problem
298    PA0194            number of time series quantities exceeds its maximum
299                       of dots_max = ... Please increase dots_max in modules.f90.
300    PA0195            dvrp_username is undefined
301    PA0196            dvrp_output="..." not allowed
302    PA0197            dvrp_file="..." not allowed
303    PA0198            mode_dvrp="..." not allowed
304    PA0199            split of communicator not realized with  MPI1 coupling
305                       atmosphere-ocean'
306    PA0200            missing dz
307    PA0201            dz=... <= 0.0
308    PA0202            grid anisotropy exceeds threshold given by only local
309                       horizontal reduction of near_wall mixing length l_wall
310                       starting from height level k = ... .
311    PA0203            inconsistent building parameters: bxl=... bxr=... bys=...
312                       byn=... nx=... ny=...
313    PA0204            no street canyon width given
314    PA0205            inconsistent canyon parameters: cxl=... cxr=...
315                       cwx=... ch=... nx=... ny=...
316    PA0206            inconsistent canyon parameters:... cys=... cyn=...
317                       cwy=... ch=... nx=... ny=...
318    PA0207            inconsistent canyon parameters: street canyon can
319                       only be oriented either in x- or in y-direction
320    PA0208            file TOPOGRAPHY_DATA does not exist
321    PA0209            errors in file TOPOGRAPHY_DATA
322    PA0210            nzb_local values are outside the model domain
323                      MINVAL( nzb_local ) = ...
324                       MAXVAL( nzb_local ) = ...
325    PA0211            nzb_local does not fulfill cyclic boundary condition
326                       in x-direction
327    PA0212            nzb_local does not fulfill cyclic boundary condition
328                       in y-direction   
329    PA0213            max_number_of_particle_groups =...
330                       number_of_particle_groups reset to ...
331    PA0214            version mismatch concerning data from prior run
332                       version on file    = ...
333                       version in program = ...
334    PA0215            particle group # ...  has a density ratio /= 0
335                       but radius = 0
336    PA0216            number of initial particles (...) exceeds
337                       maximum_number_of_particles (...) on PE ...
338    PA0217            unknown boundary condition bc_par_b = "..."
339    PA0218            unknown boundary condition bc_par_t = "..."
340    PA0219            unknown boundary condition bc_par_lr = "..."
341    PA0220            unknown boundary condition bc_par_ns = "..."
342    PA0221            number of PEs of the prescribed topology (...) does not match
343                       the number of PEs available to the job ()
344    PA0222            if the processor topology is prescribed by the user,
345                       both values of "npex" and "npey" must be given
346                       in the NAMELIST-parameter file
347    PA0223            psolver = "poisfft_hybrid" can only be used in case of
348                       a 1d-decomposition along x
349    PA0224            no matching grid for transpositions found
350    PA0225            x-direction: gridpoint number (...)is not an
351                       integral divisor of the number of procesors (...)
352    PA0226            x-direction: nx does not match the requirements given
353                       by the number of PEs used
354                       please use nx = ... instead of nx =...
355    PA0227            y-direction: gridpoint number (...) is not an
356                       integral divisor of the number of processors (...)
357    PA0228            y-direction: ny does not match the requirements given
358                       by the number of PEs used
359                       please use ny = ... instead of ny =...
360    PA0229            1d-decomposition along x chosen but nz restrictions
361                       may occur since ups-scheme is activated
362    PA0230            transposition z --> x:
363                       nz=... is not an integral divisior of pdims(1)= ...
364    PA0231            transposition x --> y:
365                       nx+1=... is not an integral divisor of pdims(2)= ...
366    PA0232            transposition y --> z:
367                       ny+1=... is not an integral divisor of pdims(1)=...
368    PA0233            transposition x --> y:
369                       ny+1=... is not an integral divisor of pdims(1)=...
370    PA0234            direct transposition z --> y (needed for spectra):
371                       nz=... is not an integral divisor of pdims(2)=...
372    PA0235            mg_switch_to_pe0_level out of range and reset to
373                       default (=0)     
374    PA0236            not enough memory for storing gathered multigrid data on PE0
375    PA0237             multigrid gather/scatter impossible in non parallel mode
376    PA0238            more than 10 multigrid levels
377    PA0239            The value for "topography_grid_convention" is not set.
378                       Its default value is only valid for
379                       "topography" = ''single_building'',
380                       ''single_street_canyon'' or ''read_from_file''
381                       Choose ''cell_edge'' or ''cell_center''.
382    PA0240            The value for "topography_grid_convention" is not
383                       recognized. Choose ''cell_edge'' or ''cell_center''.
384    PA0241            netcdf_precision must contain a "_"
385                       netcdf_precision(...)="..."
386    PA0242            illegal netcdf precision: netcdf_precision( ...)="..."
387    PA0243            unknown variable in inipar assignment:
388                       netcdf_precision(', i, ')="..."
389    PA0244            no grid defined for variable ...
390    PA0245            NetCDF file for volume data ... from previuos run found,
391                       but this file cannot be extended due to  variable mismatch.
392                       New file is created instead.
393    PA0246            NetCDF file for volume data ... from previuos run found,
394                       but this file cannot be extended due to mismatch in
395                       number of vertical grid points (nz_do3d).
396                       New file is created instead.
397    PA0247            NetCDF file for volume data ... from previuos run found,
398                       but this file cannot be extended because the current
399                       output time is less or equal than the last output time
400                       on this file. New file is created instead.
401    PA0248            NetCDF file for volume data ... from previous run found.
402                       This file will be extended.
403    PA0249            NetCDF file for cross-sections ... from previuos run found,
404                       but this file cannot be extended due to variable mismatch.
405                       New file is created instead.
406    PA0250            NetCDF file for cross-sections ... from previuos run found,
407                       but this file cannot be extended due to mismatch in
408                       number of cross sections. New file is created instead.
409    PA0251            NetCDF file for cross-sections ... from previuos run found
410                      but this file cannot be extended due to mismatch in cross
411                       section levels. New file is created instead.
412    PA0252            NetCDF file for cross sections ... from previuos run found,
413                       but this file cannot be extended because the current
414                       output time is less or equal than the last output time
415                       on this file.
416                       New file is created instead.
417    PA0253            NetCDF file for cross-sections ... from previous run found.
418                       This file will be extended.
419    PA0254            NetCDF file for vertical profiles from previuos run found,
420                       but this file cannot be extended due to variable mismatch.
421                       New file is created instead.
422    PA0255            NetCDF file for vertical profiles from previuos run found,
423                       but this file cannot be extended because the current
424                       output time is less or equal than the last output time
425                       on this file. New file is created instead.
426    PA0256            NetCDF file for vertical profiles from previous run found.
427                       This file will be extended.
428    PA0257            NetCDF file for time series from previuos run found
429                       but this file cannot be extended due tovariable mismatch.
430                       New file is created instead.
431    PA0258            NetCDF file for time series from previuos run found,
432                       but this file cannot be extended because the current
433                       output time is less or equal than the last output time
434                       on this file. New file is created instead.
435    PA0259            NetCDF file for time series from previous run found.
436                       This file will be extended.
437    PA0260            NetCDF file for spectra from previuos run found,
438                       but this file cannot be extended due to variable mismatch.
439                       New file is created instead.
440    PA0261            NetCDF file for spectra from previuos run found,
441                       but this file cannot be extended due to mismatch in
442                       number of vertical levels. New file is created instead.
443    PA0262            NetCDF file for spectra from previuos run found,
444                       but this file cannot be extended due to mismatch in
445                       heights of vertical levels. New file is created instead.
446    PA0263            NetCDF file for spectra from previuos run found,
447                       but this file cannot be extended because the current
448                       output time is less or equal than the last output time
449                       on this file. New file is created instead.
450    PA0264            NetCDF file for spectra from previous run found.
451                       This file will be extended.
452    PA0265            NetCDF file for particles from previuos run found,
453                       but this file cannot be extended because the current
454                       output time is less or equal than the last output time
455                       on this file. New file is created instead.
456    PA0266            NetCDF file for particles from previous run found.
457                       This file will be extended.
458    PA0267            NetCDF file for particle time series from previuos run found,
459                       but this file cannot be extended due to variable mismatch.
460                       New file is created instead.
461    PA0268            NetCDF file for particle time series from previuos run found,
462                       but this file cannot be extended because the current
463                       output time is less or equal than the last output time
464                       on this file. New file is created instead.
465    PA0269            NetCDF file for particle time series from previous run found.
466                       This file will be extended.
467    PA0270            mode "..." not supported
468    PA0271            errors in \$inipar &or no \$inipar-namelist found
469                       (CRAY-machines only)
470    PA0272            no \$inipar-namelist found
471    PA0273            no value or wrong value given for nx: nx=...
472    PA0274            no value or wrong value given for ny: ny=...
473    PA0275            no value or wrong value given for nz: nz=...
474    PA0276            local file ENVPAR not found
475                       some variables for steering may not be properly set
476    PA0277            errors in local file ENVPAR
477                       some variables for steering may not be properly set
478    PA0278            no envpar-NAMELIST found in local file ENVPAR
479                      some variables for steering may not be properly set
480    PA0279            wrong component: ...
481    PA0280            Number of OpenMP threads = ...
482    PA0281            running optimized multinode version
483                       switch_per_lpar        = ...
484                       tasks_per_lpar         = ...
485                       tasks_per_logical_node = ...
486    PA0282            parallel environment (MPI) required
487    PA0283            no sufficient convergence within 1000 cycles
488    PA0284            data from subdomain of previous run mapped more
489                       than 1000 times
490    PA0285            number of PEs or virtual PE-grid changed in restart run
491                       PE ... will read from files ...
492    PA0286            version mismatch concerning data from prior run
493                       version on file    = "..."
494                       version in program = "..."
495    PA0287            problem with index bound nxl on restart file "..."
496                       nxl = ... but it should be = ... from the index bound
497                       information array
498    PA0288            problem with index bound nxr on restart file "..."
499                       nxr = ... but it should be = ... from the index bound
500                       information array
501    PA0289            problem with index bound nys on restart file "..."
502                       nys = .. but it should be = ... from the index bound
503                       information array 
504    PA0290            problem with index bound nyn on restart file "..."
505                       nyn = ... but it should be = ... from the index bound
506                       information array
507    PA0291            mismatch between actual data and data
508                       from prior run on PE ...
509                       nzb on file = ...
510                       nzb         = ...
511    PA0292            mismatch between actual data and data
512                       from prior run on PE ...
513                       nzt on file = ...
514                       nzt         = ...
515    PA0293            read_3d_binary: spectrum_x
516                       on restart file ignored because total numbers of
517                       grid points (nx) do not match
518    PA0294            read_3d_binary: spectrum_y
519                       on restart file ignored because total numbers of
520                       grid points (ny) do not match
521    PA0295            unknown field named "..." found in data from
522                       prior run on PE ...
523    PA0296            version mismatch concerning control variables
524                       version on file    = "..."
525                       version on program = "..."
526    PA0297            numprocs not found in data from prior run on PE ...
527    PA0298            hor_index_bounds not found in data from prior
528                       run on PE ...
529    PA0299            nz not found in data from prior run on PE ...
530    PA0300            max_pr_user not found in data from prior run on PE ...
531    PA0301            statistic_regions not found in data from prior
532                       run on PE ...
533    PA0302            unknown variable named "..." found in data from
534                       prior run on PE ... 
535    PA0303            nz not found in restart data file
536    PA0304            mismatch concerning number of gridpoints along z
537                       nz on file    = "..."
538                       nz from run   = "..."
539    PA0305            max_pr_user not found in restart data file
540    PA0306            number of user profiles on restart data file differs
541                       from the current run
542                       max_pr_user on file    = "..."
543                       max_pr_user from run   = "..."
544    PA0307            statistic_regions not found in restart data file
545    PA0308            statistic regions on restart data file differ
546                       from the current run
547                       statistic regions on file    = "..."
548                       statistic regions from run   = "..."
549                      statistic data may be lost!
550    PA0309            inflow profiles not temporally averaged.
551                       Averaging will be done now using ... samples. 
552    PA0310            remote model "..." terminated with
553                       terminate_coupled_remote = ...
554                       local model  "..." has terminate_coupled = ...
555    PA0311            number of gridpoints along x or/and y contain illegal 
556                       factors only factors 8,6,5,4,3,2 are allowed
557    PA0312            Time step has reached minimum limit.',        &
558                       dt      = ... s  Simulation is terminated.
559                       old_dt  = ... s                           
560                       dt_u    = ... s                             
561                       dt_v    = ... s                           
562                       dt_w    = ... s                             
563                       dt_diff = ... s                         
564                       u_max   = ... m/s   k=... j=...  i=...           
565                       v_max   = ... m/s   k=... j=...  i=...           
566                       w_max   = ... m/s   k=... j=...  i=...
567   
568
569    UI0001            unknown location "..."
570    UI0002            location "..." is not allowed to be called with
571                       parameters "i" and "j"
572    UI0003            no output possible for: ...
573    UI0004            unknown mode "..."
574    UI0005            topography "..." not available yet
575    UI0006            unknown topography "..."
576    UI0007            canopy_mode "..." not available yet
577    UI0008            unknown canopy_mode "..."
578    UI0009            the number of user-defined profiles given in
579                       data_output_pr (...) does not match the one
580                       found in the restart file (...)
581    UI0010            Spectra of ... can not be calculated
582    UI0011            Spectra of ... are not defined
583    UI0012            unknown variable named "..." found in data from prior
584                       run on PE
585   
Note: See TracBrowser for help on using the repository browser.