Home

Context Navigation

source: palm/trunk/DOC/app/chapter_3.4.html @ 48

Last change on this file since 48 was 48, checked in by raasch, 18 years ago
preliminary version, several changes to be explained later
File size: 102.3 KB

Line
1	<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
2	<html><head>
3
4
5
6
7
8
9
10
11
12
13	<meta content="text/html; charset=ISO-8859-1" http-equiv="content-type">
14	<title>chapter_3.4</title></head>
15
16	<body>
17
18
19
20
21
22	<h3 style="line-height: 100%;"><font color="#000000">3.4 Input and
23	output files</font></h3>
24
25
26
27
28
29	<p style="line-height: 100%;"><font color="#000000"></font></p>
30
31	<p style="line-height: 100%;"><font color="#000000">The model works
32	with a set of files, which are all located in the temporary working
33	directory and which are either expected at the beginning of the run
34	(the so-called input files) or which are
35	produced during the run and/or at the end of the simulation (output
36	files).</font><font color="#800000">
37	<font color="#000000">The following table lists all default files
38	addressed by the model. They are arranged according to the
39	associated FORTRAN unit (unit number).</font> </font><font color="#000000">The
40	unit 90 is used for different files, which are opened only briefly
41	and uniquely in the model and closed directly afterwards.
42	Unit numbers 101 - 109, 111 - 113, and 116 refer to data files which have NetCDF format.
43	These are not opened by a FORTRAN-OPEN-statement but by a corresponding
44	NetCDF call (NF90_CREATE or NF90_OPEN). These files are only created on
45	machines where a NetCDF library is available.<br>
46
47	</font></p>
48
49
50	<p style="line-height: 100%;"><font color="#000000">The file
51	names described in the list correspond to the names indicated in the
52	respective OPEN instruction, i.e. the files are expected and saved
53	under these names in the temporary working directory of the model. By
54	default, file names are always written in capital letters. The
55	third column indicates whether it is an input or output file (I
56	and/or O). The NetCDF files can be both input and output files (I/O).
57	If restart jobs shall append data to an existing NetCDF file (created
58	by a previous job of the job chain), the respective file has to be
59	given as an input file (see also <a href="../app/chapter_4.5.1.html">chapter 4.5.1</a> which gives more details about the PALM-NetCDF-output).</font> </p>
60
61	<p style="line-height: 100%;"> </p>
62
63
64
65
66
67
68	<p style="line-height: 100%;"><font color="#000000">On parallel
69	computers many of the files are read and/or written by the central
70	processing element 0 (PE0) only. These files have processor-independent
71	content (and therefore they can be read or written by other
72	PEs just as well). However, certain files have processor-dependent
73	content. For the binary output of data for restart runs (local file
74	<a href="#BINOUT">BINOUT</a>),
75	for example, <font color="#000000">each PE outputs only the data of
76	its subdomain. So each processing element writes
77	into its own file with its own file name. These files lie in a
78	subdirectory of the temporary working directory. Their names are build
79	off from the underline ("_ ") and the four digit
80	processor ID. The data written for restart runs would be e.g. on the
81	files BINOUT/_0000 (PE0), BINOUT/_0001 (PE1), BINOUT/_0002 (PE2) etc.
82	Such files, which have processor-dependent content on parallel
83	computers, are marked in the following list by the fact, that to the
84	file name a line (”/“) is attached. If appropriate output
85	files are to be copied through <b>mrun</b> to permanent files, and/or
86	files with processor-dependent content are supposed to be copied as
87	input files into the temporary working directory of the model, you have
88	to indicate a special file attribute in the appropriate file
89	connection statement </font>(see <a href="http://www.muk.uni-hannover.de/institut/software/mrun_beschreibung.html#arpe">arpe</a>,
90	<a href="http://www.muk.uni-hannover.de/institut/software/mrun_beschreibung.html#flpe">flpe</a>
91	<font color="#000000">in the <b>mrun </b>description).</font><font color="#800000">
92	</font><font color="#000000">Then the permanent file name will be
93	interpreted as a directory name, in which the input files are
94	expected and/or to which output files are written. The file names in
95	these directories are always named _0000, _0001, _0002 etc. </font>
96	</font></p>
97
98
99
100
101
102	<font color="#000000"><font color="#000000">For internal use,
103	the model may open a set of further files, which are not
104	defined by the user but contain no usable information and
105	therefore are not included in this list. <br>
106
107
108
109
110
111	<br>
112
113
114
115
116
117	</font>
118	<table style="text-align: left; width: 100%;" border="1" cellpadding="2" cellspacing="2">
119
120
121
122
123
124	<tbody>
125
126
127
128
129
130	<tr valign="top">
131
132
133
134
135
136	<td width="8%">
137
138
139
140
141
142	<p><font size="4"><b>Unit</b></font></p>
143
144
145
146
147
148	</td>
149
150
151
152
153
154	<td width="12%">
155
156
157
158
159
160	<p><font size="4"><b>Name</b></font></p>
161
162
163
164
165
166	</td>
167
168
169
170
171
172	<td width="4%">
173
174
175
176
177
178	<p><font size="4"><b>I/O</b></font></p>
179
180
181
182
183
184	</td>
185
186
187
188
189
190	<td width="9%">
191
192
193
194
195
196	<p><font size="4"><b>Format</b></font></p>
197
198
199
200
201
202	</td>
203
204
205
206
207
208	<td colspan="1" width="67%">
209
210
211
212
213
214	<p><font size="4"><b>Description/contents</b></font></p>
215
216
217
218
219
220	</td>
221
222
223
224
225
226	</tr>
227
228
229
230
231
232	<tr valign="top">
233
234
235
236
237
238	<td style="text-align: center;" width="8%"> 11<br>
239
240
241
242
243
244	</td>
245
246
247
248
249
250	<td width="12%">
251
252
253
254
255
256	<p><a name="PARIN"></a>PARIN</p>
257
258
259
260
261
262	</td>
263
264
265
266
267
268	<td width="4%">
269
270
271
272
273
274	<p align="center">I</p>
275
276
277
278
279
280	</td>
281
282
283
284
285
286	<td style="width: 9%;">
287
288
289
290
291
292	<p>ASCII/  <br>
293
294
295
296
297
298	NAMELIST</p>
299
300
301
302
303
304	</td>
305
306
307
308
309
310	<td colspan="1" width="67%">
311
312
313
314
315
316	<p><font color="#000000">Parameter for model steering. This file
317	is needed by the model in each case. Its content and structure is
318	described in detail in</font> <a href="chapter_4.0.html">chapter
319	4.0</a>. <a href="chapter_4.4.html">Chapter
320	4.4</a> <font color="#000000">shows a simple example. </font> </p>
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335	</td>
336
337
338
339
340
341	</tr>
342
343
344
345
346
347	<tr valign="top">
348
349
350
351
352
353	<td style="text-align: center;" width="8%">
354
355
356
357
358
359	<p align="center">13</p>
360
361
362
363
364
365	</td>
366
367
368
369
370
371	<td width="12%">
372
373
374
375
376
377	<p><a name="BININ"></a>BININ/</p>
378
379
380
381
382
383	</td>
384
385
386
387
388
389	<td width="4%">
390
391
392
393
394
395	<p align="center">I</p>
396
397
398
399
400
401	</td>
402
403
404
405
406
407	<td width="9%">
408
409
410
411
412
413	<p>Binary</p>
414
415
416
417
418
419	</td>
420
421
422
423
424
425	<td colspan="1" width="67%">
426
427
428
429
430
431	<p>Binary data, which are read in by the model at the beginning
432	of a restart run (see <a href="chapter_3.3.html">chapter
433	3.3</a>). The appropriate file must have been written by the preceding
434	job of the job chain (see <a href="#BINOUT">BINOUT</a>).
435	This file contains the initial parameters (see <a href="chapter_4.1.html">chapter
436	4.1</a>) of the job chain, arrays of the prognostic and diagnostic
437	variables as well as those parameters and variables for plots of
438	horizontally averaged vertical profiles (see <a href="chapter_4.2.html#data_output_pr">data_output_pr</a>),
439	which have been determined by the job chain so far. Concerning runs on
440	several processors it has to be noted that each processing element
441	reads its own file and the file content is processor-dependent. The
442	number of processors which can be used must not be changed during a job
443	chain and/or if a job chain is continued.  </p>
444
445
446
447
448
449
450
451
452
453
454	<p>Knowledge of the file structure is usually not necessary,
455	because the file is produced and also read again by the model, but it
456	can be useful for error determination in case of read errors .
457	Therefore the file structure is described in the following.  </p>
458
459
460
461
462
463
464
465
466
467
468	<p>The first record of this file contains a version number (ten
469	character string) of the subroutine, which, which output the data that
470	follows (write_var_list.f90). This number has to
471	agree with the version number subroutine which is reading the file
472	(read_var_list.f90) in case of a restart run. Otherwise the model run
473	is aborted. Version numbers are changed whenever new code revisions
474	require a change of the file format.  </p>
475
476
477
478
479
480
481
482
483
484
485	<p>Starting from the second record, all initial parameters follow
486	(exception: <a href="chapter_4.1.html#initializing_actions">initializing_actions</a>),
487	whereby each parameter fills two records. In the first record the name
488	of the parameter is saved as a character string (30 characters long,
489	short names are filled by trailing blanks, longer names are cut off at
490	the end), in the second record the value (or the values) of the
491	parameter follow. The sequence of parameters on the file may be
492	arbitrary, however the first and second variable must be <a href="chapter_4.1.html#nz">nz</a>
493	and <a href="chapter_4.1.html#statistic_regions">statistic_regions</a>.
494	If a variable with unknown name is found the model run is
495	aborted.  </p>
496
497
498
499
500
501
502
503
504
505
506	<p>At the end of the initial parameters a record with the string "<i>***
507	end ***</i>"follows (filled up with trailing blanks up to a length of
508	30 characters).  </p>
509
510
511
512
513
514
515
516
517
518
519	<p>Afterwards the fields of the prognostic and diagnostic
520	variables follow. This part of the file also begins with a record
521	consisting of a character string of length 10, which contains the
522	version number of the subroutine that wrote the arrays that follow
523	(write_3d_binary.f90). It must agree with the number of the reading
524	subroutine (read_3d_binary.f90).  </p>
525
526
527
528
529
530
531
532
533
534
535	<p>The following record contains the number of processors which
536	were used in the model run producing this file, the processor ID of the
537	special processor, which creates the file, as well as the lower and
538	upper array indices of the subdomain belonging to this processing
539	element. If no complete agreement with the values of the current model
540	run exists, then this is aborted. This examination must be made in
541	particular on parallel computers, because the jobs of a job chain
542	always have to use the same number of processors and the same virtual
543	processor grid.  </p>
544
545
546
547
548
549
550
551
552
553
554	<p>After these tests the individual arrays as well as parameters
555	and variables for plots of horizontally averaged vertical profiles
556	follow. Like the initialization parameters, they consist of two
557	records. In the first record, the name of the array or the variable
558	(character string, consisting of 20 characters, filled with trailing
559	blanks) is located, in the second one its values follow. The sequence
560	of the individual variables may be arbitrary again. The parameters for
561	the plot and the respective variables are only read in if for the run
562	parameter <a href="chapter_4.2.html#use_prior_plot1d_parameters">use_prior_plot1d_parameters</a>
563	= <i>.TRUE</i> is selected, otherwise they will be skipped.  </p>
564
565
566
567
568
569
570
571
572
573
574	<p>At the end of the file there has to be a record with the
575	character string "<span style="font-style: italic;"></span><i>*** end
576	***</i>"(filled up with trailing blanks up to a length of 20
577	characters).</p>
578
579
580
581
582
583	</td>
584
585
586
587
588
589	</tr>
590
591
592
593
594
595	<tr valign="top">
596
597
598
599
600
601	<td style="text-align: center;" width="8%">
602
603
604
605
606
607	<p align="center">14</p>
608
609
610
611
612
613	</td>
614
615
616
617
618
619	<td width="12%">
620
621
622
623
624
625	<p><a name="BINOUT"></a>BINOUT/</p>
626
627
628
629
630
631	</td>
632
633
634
635
636
637	<td width="4%">
638
639
640
641
642
643	<p align="center">O</p>
644
645
646
647
648
649	</td>
650
651
652
653
654
655	<td width="9%">
656
657
658
659
660
661	<p>Binary</p>
662
663
664
665
666
667	</td>
668
669
670
671
672
673	<td colspan="1" width="67%">
674
675
676
677
678
679	<p>Binary data, which are written by the model at the end of the
680	run and possibly needed by restart runs (see <a href="chapter_3.3.html">chapter
681	3.3</a>) for the initialization. This output file is then read in as
682	file <a href="#BININ">BININ</a>.
683	It contains the initial parameters (see <a href="chapter_4.1.html">chapter
684	4.1</a>) of the model run, arrays of the prognostic and diagnostic
685	variables as well as those parameters determined so far during a job
686	chain and variables for plots of horizontally averaged vertical
687	profiles (see <a href="chapter_4.2.html#data_output_pr">data_output_pr</a>).
688	With runs on several processors it has to be noted that each processing
689	element writes its own file and the file content is
690	processor-dependent. A specification of the file format can be found in
691	the
692	description of the file <a href="#BININ">BININ</a>.  </p>
693
694
695
696
697
698
699
700
701
702
703	<p>The file BINOUT is written by the model only if, with the help
704	of the <b>mrun</b>-configuration file, the <font face="Thorndale, serif">value</font> <span style="font-family: monospace;">true</span> is assigned for the
705	environment
706	variable <span style="font-size: 10pt; font-family: monospace;">write_binary</span>
707	(see <a href="chapter_3.3.html">chapter
708	3.3</a>).  </p>
709
710
711
712
713
714
715
716
717
718
719	<p>With large grid point numbers the file BINOUT (or the
720	files residing in directory BINOUT/) will be very large and should
721	be stored (if available) on the archive system of the remote computer.</p>
722
723
724
725
726
727	</td>
728
729
730
731
732
733	</tr>
734
735
736
737
738
739	<tr>
740
741
742
743
744
745	<td style="vertical-align: top; text-align: center;">15<br>
746
747
748
749
750
751	</td>
752
753
754
755
756
757	<td style="vertical-align: top;"><a name="RUN_CONTROL"></a>RUN_CONTROL</td>
758
759
760
761
762
763	<td style="vertical-align: top;">O</td>
764
765
766
767
768
769	<td style="vertical-align: top;">Ascii</td>
770
771
772
773
774
775	<td colspan="1" width="67%">
776
777
778
779
780
781	<p>This file contains the so-called time step control output of
782	the model. At certain temporal intervals, which are described by the
783	run
784	parameter <a href="chapter_4.1.html#dt_run_control">dt_run_control</a>,
785	a line with the values of certain control parameters is written into
786	this
787	file. Additionally, such a control line is always written, whenever the
788	time step of the model changes. All data and quantities always refer to
789	the entire model domain.  </p>
790
791
792
793
794
795
796
797
798
799
800	<p>If the 1D-model is switched on for the initialization of the
801	3D-models, then control lines are likewise written into this file at
802	certain temporal intervals (see <a href="chapter_4.1.html#dt_run_control_1d">dt_run_control_1d</a>).
803	</p>
804
805
806
807
808
809
810
811
812
813
814	<p>By default, the file RUN_CONTROL only lists information
815	about the selected model parameters at the beginning of the
816	initial run. These informations are written at the beginnning of a run.
817	They correspond to those of the file <a href="#HEADER">HEADER</a>
818	(however without data concerning the consumed CPU time, because these
819	are
820	only known at the end of a run). With the run parameter <a href="chapter_4.2.html#force_print_header">force_print_header</a>
821	it can be achieved that this information is also written at the
822	beginning of the file RUN_CONTROL at restart runs.  </p>
823
824
825
826
827
828
829
830
831
832
833	<p>The individual columns of the 1D - time step control output
834	have the following meaning (listed by the respective heading of the
835	appropriate
836	column in the file):  <br>
837
838
839
840
841
842	</p>
843
844
845
846
847
848
849
850
851
852
853	<table style="text-align: left; width: 100%;" cellpadding="2">
854
855
856
857
858
859	<tbody>
860
861
862
863
864
865	<tr>
866
867
868
869
870
871	<td style="vertical-align: top;">ITER.</td>
872
873
874
875
876
877	<td style="vertical-align: top;">Number of time steps
878	accomplished so far</td>
879
880
881
882
883
884	</tr>
885
886
887
888
889
890	<tr>
891
892
893
894
895
896	<td style="vertical-align: top;">HH:MM:SS</td>
897
898
899
900
901
902	<td style="vertical-align: top;">Time (in hours: minutes:
903	seconds)</td>
904
905
906
907
908
909	</tr>
910
911
912
913
914
915	<tr>
916
917
918
919
920
921	<td style="vertical-align: top;">DT</td>
922
923
924
925
926
927	<td style="vertical-align: top;">Time step (in s)</td>
928
929
930
931
932
933	</tr>
934
935
936
937
938
939	<tr>
940
941
942
943
944
945	<td style="vertical-align: top;">UMAX</td>
946
947
948
949
950
951	<td style="vertical-align: top;">Maximum absolute wind
952	velocity
953	(u-component) (in m/s)</td>
954
955
956
957
958
959	</tr>
960
961
962
963
964
965	<tr>
966
967
968
969
970
971	<td style="vertical-align: top;">VMAX</td>
972
973
974
975
976
977	<td style="vertical-align: top;">Maximum absolute wind
978	velocity
979	(v-component) (in m/s)</td>
980
981
982
983
984
985	</tr>
986
987
988
989
990
991	<tr>
992
993
994
995
996
997	<td style="vertical-align: top;">U *</td>
998
999
1000
1001
1002
1003	<td style="vertical-align: top;">Friction velocity (<font color="#000000">in </font>m/s)</td>
1004
1005
1006
1007
1008
1009	</tr>
1010
1011
1012
1013
1014
1015	<tr>
1016
1017
1018
1019
1020
1021	<td style="vertical-align: top;">ALPHA</td>
1022
1023
1024
1025
1026
1027	<td style="vertical-align: top;">Angle of the wind vector
1028	(to the x-axis) at the top of the
1029	Prandtl layer (k=1) (<font color="#000000">in </font>degrees)</td>
1030
1031
1032
1033
1034
1035	</tr>
1036
1037
1038
1039
1040
1041	<tr>
1042
1043
1044
1045
1046
1047	<td style="vertical-align: middle;">ENERG.</td>
1048
1049
1050
1051
1052
1053	<td style="vertical-align: top;">Kinetic energy of the
1054	1D-model (<font color="#000000">in </font>m<sup>2</sup>/s<sup>2</sup>),
1055	averaged over all grid points</td>
1056
1057
1058
1059
1060
1061	</tr>
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072	</tbody>
1073
1074
1075
1076
1077
1078	</table>
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089	<p>
1090	The individual columns of the 3D - time step control output
1091	have the following meaning (listed by the respective heading of the
1092	appropriate
1093	column in the file):<br>
1094
1095
1096
1097
1098
1099	</p>
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110	<table style="text-align: left; width: 100%;" cellpadding="2">
1111
1112
1113
1114
1115
1116	<tbody>
1117
1118
1119
1120
1121
1122	<tr>
1123
1124
1125
1126
1127
1128	<td style="vertical-align: top;">RUN</td>
1129
1130
1131
1132
1133
1134	<td style="vertical-align: top;">Serial-number of the job
1135	in the job chain. The initial
1136	run has the number 0, restart runs accordingly have larger numbers.</td>
1137
1138
1139
1140
1141
1142	</tr>
1143
1144
1145
1146
1147
1148	<tr>
1149
1150
1151
1152
1153
1154	<td style="vertical-align: top;">ITER.</td>
1155
1156
1157
1158
1159
1160	<td style="vertical-align: top;">Number of time steps
1161	accomplished since starting time t=0 of
1162	the initial run.</td>
1163
1164
1165
1166
1167
1168	</tr>
1169
1170
1171
1172
1173
1174	<tr>
1175
1176
1177
1178
1179
1180	<td style="vertical-align: top;">HH:MM:SS</td>
1181
1182
1183
1184
1185
1186	<td style="vertical-align: top;">Time (<font color="#000000">in
1187	</font>hours: minutes:
1188	seconds) since starting time t=0 of the
1189	initial run.</td>
1190
1191
1192
1193
1194
1195	</tr>
1196
1197
1198
1199
1200
1201	<tr>
1202
1203
1204
1205
1206
1207	<td style="vertical-align: top;">DT (E)</td>
1208
1209
1210
1211
1212
1213	<td style="vertical-align: top;">Time step (<font color="#000000">in </font>s). The
1214	following character indicates whether the
1215	time
1216	step is limited by the advection criterion (A) or the diffusion
1217	criterion (D). After changes of the time step a further character
1218	follows,
1219	which indicates with which time step procedure the changed time step
1220	was accomplished (<span style="font-family: monospace;">L:</span>
1221	Leapfrog, <span style="font-family: monospace;">E:</span> Euler). This
1222	does
1223	not apply for the default Runge-Kutta timestep scheme.</td>
1224
1225
1226
1227
1228
1229	</tr>
1230
1231
1232
1233
1234
1235	<tr>
1236
1237
1238
1239
1240
1241	<td style="vertical-align: top;">UMAX</td>
1242
1243
1244
1245
1246
1247	<td style="vertical-align: top;">Maximum absolute wind
1248	velocity (u-component) (<font color="#000000">in </font>m/s). If at
1249	the
1250	appropriate output time a random disturbance was added to the
1251	horizontal velocity field (see <a href="chapter_4.2.html#create_disturbances">create_disturbances</a>),
1252	the character D will appear directly after the velocity value.</td>
1253
1254
1255
1256
1257
1258	</tr>
1259
1260
1261
1262
1263
1264	<tr>
1265
1266
1267
1268
1269
1270	<td style="vertical-align: top;">VMAX</td>
1271
1272
1273
1274
1275
1276	<td style="vertical-align: top;">Maximum absolute wind
1277	velocity (v-component) (<font color="#000000">in </font>m/s). If at
1278	the
1279	appropriate output time a random disturbance was added to the
1280	horizontal velocity field (see <a href="chapter_4.2.html#create_disturbances">create_disturbances</a>),
1281	the character D will appear directly after the velocity value.</td>
1282
1283
1284
1285
1286
1287	</tr>
1288
1289
1290
1291
1292
1293	<tr>
1294
1295
1296
1297
1298
1299	<td style="vertical-align: top;">WMAX</td>
1300
1301
1302
1303
1304
1305	<td style="vertical-align: top;">Maximum absolute wind
1306	velocity (w-component) (<font color="#000000">in </font>m/s).</td>
1307
1308
1309
1310
1311
1312	</tr>
1313
1314
1315
1316
1317
1318	<tr>
1319
1320
1321
1322
1323
1324	<td style="vertical-align: top;">U *</td>
1325
1326
1327
1328
1329
1330	<td style="vertical-align: top;">Horizontal average of the
1331	friction velocity (<font color="#000000">in </font>m/s).</td>
1332
1333
1334
1335
1336
1337	</tr>
1338
1339
1340
1341
1342
1343	<tr>
1344
1345
1346
1347
1348
1349	<td style="vertical-align: top;">W *</td>
1350
1351
1352
1353
1354
1355	<td style="vertical-align: top;">Convective velocity scale
1356	(<font color="#000000">in </font>m/s). The assumed boundary layer
1357	height is determined via the heat flux minimum criterion.</td>
1358
1359
1360
1361
1362
1363	</tr>
1364
1365
1366
1367
1368
1369	<tr>
1370
1371
1372
1373
1374
1375	<td style="vertical-align: top;">THETA *</td>
1376
1377
1378
1379
1380
1381	<td style="vertical-align: top;">Characteristic temperature
1382	of the Prandtl - layer (<font color="#000000">in </font>K).</td>
1383
1384
1385
1386
1387
1388	</tr>
1389
1390
1391
1392
1393
1394	<tr>
1395
1396
1397
1398
1399
1400	<td style="vertical-align: top;">Z_I</td>
1401
1402
1403
1404
1405
1406	<td style="vertical-align: top;">Height of the convective
1407	boundary layer (<font color="#000000">in </font>m), determined via
1408	the criterion of the heat flux minimum.</td>
1409
1410
1411
1412
1413
1414	</tr>
1415
1416
1417
1418
1419
1420	<tr>
1421
1422
1423
1424
1425
1426	<td style="vertical-align: middle;">ENERG.</td>
1427
1428
1429
1430
1431
1432	<td style="vertical-align: top;">Average resolved total
1433	energy of the flow field (<font color="#000000">in </font>m<sup>2</sup>/s<sup>2</sup>),
1434	normalized with the total number of grid points.</td>
1435
1436
1437
1438
1439
1440	</tr>
1441
1442
1443
1444
1445
1446	<tr>
1447
1448
1449
1450
1451
1452	<td style="vertical-align: middle;">DISTENERG</td>
1453
1454
1455
1456
1457
1458	<td style="vertical-align: top;">Average resolved
1459	disturbance energy of flow field (<font color="#000000">in </font>m<sup>2</sup>/s<sup>2</sup>),
1460	normalized with the total number of grid points.</td>
1461
1462
1463
1464
1465
1466	</tr>
1467
1468
1469
1470
1471
1472	<tr>
1473
1474
1475
1476
1477
1478	<td style="vertical-align: top;">DIVOLD</td>
1479
1480
1481
1482
1483
1484	<td style="vertical-align: top;"><font color="#000000">Divergence
1485	of the velocity field (sum of
1486	the absolute values) (</font><font color="#000000">in </font><font color="#000000">1/s) before call of the pressure solver,
1487	normalized with the total number of grid points.</font></td>
1488
1489
1490
1491
1492
1493	</tr>
1494
1495
1496
1497
1498
1499	<tr>
1500
1501
1502
1503
1504
1505	<td style="vertical-align: top;">DIVNEW</td>
1506
1507
1508
1509
1510
1511	<td style="vertical-align: top;"><font color="#000000">Divergence
1512	of the velocity field (sum of
1513	the absolute values) (</font><font color="#000000">in </font><font color="#000000">1/s) after call of the pressure solver, normalized</font>
1514	with the total number of grid points.</td>
1515
1516
1517
1518
1519
1520	</tr>
1521
1522
1523
1524
1525
1526	<tr>
1527
1528
1529
1530
1531
1532	<td style="vertical-align: top;">UMAX (KJI)</td>
1533
1534
1535
1536
1537
1538	<td style="vertical-align: top;">Indices of the grid point
1539	with the maximum absolute
1540	u-component of the wind velocity (sequence: k, j, i).</td>
1541
1542
1543
1544
1545
1546	</tr>
1547
1548
1549
1550
1551
1552	<tr>
1553
1554
1555
1556
1557
1558	<td style="vertical-align: top;">VMAX (KJI)</td>
1559
1560
1561
1562
1563
1564	<td style="vertical-align: top;">Indices of the grid point
1565	with the maximum absolute
1566	v-component of the wind velocity (sequence: k, j, i).</td>
1567
1568
1569
1570
1571
1572	</tr>
1573
1574
1575
1576
1577
1578	<tr>
1579
1580
1581
1582
1583
1584	<td style="vertical-align: top;">WMAX (KJI)</td>
1585
1586
1587
1588
1589
1590	<td style="vertical-align: top;">Indices of the grid point
1591	with the maximum absolute
1592	w-component of the wind velocity (sequence: k, j, i).</td>
1593
1594
1595
1596
1597
1598	</tr>
1599
1600
1601
1602
1603
1604	<tr>
1605
1606
1607
1608
1609
1610	<td style="vertical-align: top;">ADVECX</td>
1611
1612
1613
1614
1615
1616	<td style="vertical-align: top;">Distance (<font color="#000000">in </font>km) the
1617	coordinate system has been moved in
1618	x-direction with Galilei-Transformation switched on (see <a href="chapter_4.1.html#galilei_transformation">galilei_transformation</a>).</td>
1619
1620
1621
1622
1623
1624	</tr>
1625
1626
1627
1628
1629
1630	<tr>
1631
1632
1633
1634
1635
1636	<td style="vertical-align: top;">ADVECY</td>
1637
1638
1639
1640
1641
1642	<td style="vertical-align: top;">Distance (<font color="#000000">in </font>km) the
1643	coordinate system has been moved in
1644	y-direction with Galilei-Transformation switched on (see <a href="chapter_4.1.html#galilei_transformation">galilei_transformation</a>).</td>
1645
1646
1647
1648
1649
1650	</tr>
1651
1652
1653
1654
1655
1656
1657
1658
1659
1660
1661	</tbody>
1662
1663
1664
1665
1666
1667	</table>
1668
1669
1670
1671
1672
1673	</td>
1674
1675
1676
1677
1678
1679	</tr>
1680
1681
1682
1683
1684
1685	<tr>
1686
1687
1688
1689
1690
1691	<td style="vertical-align: top; text-align: center;">16<br>
1692
1693
1694
1695
1696
1697	</td>
1698
1699
1700
1701
1702
1703	<td style="vertical-align: top;"><a name="LIST_PROFIL"></a>LIST_PROFIL
1704	</td>
1705
1706
1707
1708
1709
1710	<td style="vertical-align: top;">O<br>
1711
1712
1713
1714
1715
1716	</td>
1717
1718
1719
1720
1721
1722	<td style="vertical-align: top;">Ascii<br>
1723
1724
1725
1726
1727
1728	</td>
1729
1730
1731
1732
1733
1734	<td style="vertical-align: top;">This file contains horizontally
1735	(and possibly temporally)
1736	averaged vertical profiles of some model variables. The quantities
1737	saved are set model-internally and can not be determined by the user.
1738	At each output time (see <a href="chapter_4.2.html#dt_dopr_listing">dt_dopr_listing</a>)
1739	two tables are written to the file consecutively. The first contains
1740	variables which are defined on the scalar / u-v-grid-levels, the
1741	second table contains variables which are defined on the w-grid-levels.
1742	If subdomains were defined with the initialization parameter <a href="chapter_4.1.html#statistic_regions">statistic_regions </a>for
1743	additional statistic evaluation, then the tables
1744	described above are written for each individual subdomain. The name of
1745	the respective subdomain (see <a href="chapter_4.3.html#region">region</a>)
1746	appears in the header of the respective table. <br>
1747
1748
1749
1750
1751
1752	In each case the tables consist of a header, followed by the
1753	profiles arranged next to each other in columns. The header contains
1754	some basic information of the respective run (model version, run
1755	identifier consisting of
1756	basic file name and number of the job in the job chain, executing
1757	computer, date, time of the beginning of the run, name of the
1758	subdomain, output time, kind of averaging). On the u-v-level the
1759	following columns are written: <br>
1760
1761
1762
1763
1764
1765
1766
1767
1768
1769
1770	<table style="text-align: left; width: 100%;" cellpadding="2">
1771
1772
1773
1774
1775
1776	<tbody>
1777
1778
1779
1780
1781
1782	<tr>
1783
1784
1785
1786
1787
1788	<td style="text-align: left; vertical-align: middle;">k<br>
1789
1790
1791
1792
1793
1794	</td>
1795
1796
1797
1798
1799
1800	<td style="text-align: left; vertical-align: middle;">Vertical
1801	grid point index.</td>
1802
1803
1804
1805
1806
1807	</tr>
1808
1809
1810
1811
1812
1813	<tr>
1814
1815
1816
1817
1818
1819	<td style="text-align: left; vertical-align: middle;">zu<br>
1820
1821
1822
1823
1824
1825	</td>
1826
1827
1828
1829
1830
1831	<td style="text-align: left; vertical-align: middle;">Height
1832	of the grid point
1833	level (<font color="#000000">in </font>m).</td>
1834
1835
1836
1837
1838
1839	</tr>
1840
1841
1842
1843
1844
1845	<tr>
1846
1847
1848
1849
1850
1851	<td style="text-align: left; vertical-align: middle;">u<br>
1852
1853
1854
1855
1856
1857	</td>
1858
1859
1860
1861
1862
1863	<td style="text-align: left; vertical-align: middle;">u-component
1864	of the wind
1865	velocity (<font color="#000000">in </font>m/s).</td>
1866
1867
1868
1869
1870
1871	</tr>
1872
1873
1874
1875
1876
1877	<tr>
1878
1879
1880
1881
1882
1883	<td style="text-align: left; vertical-align: middle;">du<br>
1884
1885
1886
1887
1888
1889	</td>
1890
1891
1892
1893
1894
1895	<td style="text-align: left; vertical-align: middle;">Deviation
1896	of the
1897	u-component from the initial profile at the
1898	time t=0 (initialization profile) (<font color="#000000">in </font>m/s).</td>
1899
1900
1901
1902
1903
1904	</tr>
1905
1906
1907
1908
1909
1910	<tr>
1911
1912
1913
1914
1915
1916	<td style="text-align: left; vertical-align: middle;">v<br>
1917
1918
1919
1920
1921
1922	</td>
1923
1924
1925
1926
1927
1928	<td style="text-align: left; vertical-align: middle;">v-component
1929	of the wind
1930	velocity (<font color="#000000">in </font>m/s).</td>
1931
1932
1933
1934
1935
1936	</tr>
1937
1938
1939
1940
1941
1942	<tr>
1943
1944
1945
1946
1947
1948	<td style="text-align: left; vertical-align: middle;">dv<br>
1949
1950
1951
1952
1953
1954	</td>
1955
1956
1957
1958
1959
1960	<td style="text-align: left; vertical-align: middle;">Deviation
1961	of the
1962	v-component from the initial profile at the
1963	time t=0 (initialization profile) (<font color="#000000">in </font>m/s).</td>
1964
1965
1966
1967
1968
1969	</tr>
1970
1971
1972
1973
1974
1975	<tr>
1976
1977
1978
1979
1980
1981	<td style="text-align: left; vertical-align: middle;">pt
1982	<br>
1983
1984
1985
1986
1987
1988	</td>
1989
1990
1991
1992
1993
1994	<td style="text-align: left; vertical-align: middle;">Potential
1995	temperature (<font color="#000000">in </font>K).</td>
1996
1997
1998
1999
2000
2001	</tr>
2002
2003
2004
2005
2006
2007	<tr>
2008
2009
2010
2011
2012
2013	<td style="text-align: left; vertical-align: middle;">dpt<br>
2014
2015
2016
2017
2018
2019	</td>
2020
2021
2022
2023
2024
2025	<td style="text-align: left; vertical-align: middle;">Deviation
2026	of potential
2027	temperature from the initial profile at
2028	the time t=0 (initialization profile) (<font color="#000000">in </font>K).</td>
2029
2030
2031
2032
2033
2034	</tr>
2035
2036
2037
2038
2039
2040	<tr>
2041
2042
2043
2044
2045
2046	<td style="text-align: left; vertical-align: middle;">e<br>
2047
2048
2049
2050
2051
2052	</td>
2053
2054
2055
2056
2057
2058	<td style="text-align: left; vertical-align: middle;">Turbulent
2059	kinetic energy
2060	(subgrid-scale) (<font color="#000000">in </font>m<sup>2</sup>/s<sup>2</sup>).</td>
2061
2062
2063
2064
2065
2066	</tr>
2067
2068
2069
2070
2071
2072	<tr>
2073
2074
2075
2076
2077
2078	<td style="text-align: left; vertical-align: middle;">Km<br>
2079
2080
2081
2082
2083
2084	</td>
2085
2086
2087
2088
2089
2090	<td style="text-align: left; vertical-align: middle;">Turbulent
2091	diffusion
2092	coefficient for momentum (<font color="#000000">in </font>m<sup>2</sup>/s).</td>
2093
2094
2095
2096
2097
2098	</tr>
2099
2100
2101
2102
2103
2104	<tr>
2105
2106
2107
2108
2109
2110	<td style="text-align: left; vertical-align: middle;">Kh<br>
2111
2112
2113
2114
2115
2116	</td>
2117
2118
2119
2120
2121
2122	<td style="text-align: left; vertical-align: middle;">Turbulent
2123	diffusion
2124	coefficient for heat (<font color="#000000">in </font>m<sup>2</sup>/s).</td>
2125
2126
2127
2128
2129
2130	</tr>
2131
2132
2133
2134
2135
2136	<tr>
2137
2138
2139
2140
2141
2142	<td style="text-align: left; vertical-align: middle;">l<br>
2143
2144
2145
2146
2147
2148	</td>
2149
2150
2151
2152
2153
2154	<td style="text-align: left; vertical-align: middle;">Mixing
2155	length (<font color="#000000">in </font>m).</td>
2156
2157
2158
2159
2160
2161	</tr>
2162
2163
2164
2165
2166
2167	<tr>
2168
2169
2170
2171
2172
2173	<td style="vertical-align: top;"><br>
2174
2175
2176
2177
2178
2179	</td>
2180
2181
2182
2183
2184
2185	<td style="vertical-align: top;"><br>
2186
2187
2188
2189
2190
2191	</td>
2192
2193
2194
2195
2196
2197	</tr>
2198
2199
2200
2201
2202
2203
2204
2205
2206
2207
2208	</tbody>
2209
2210
2211
2212
2213
2214	</table>
2215
2216
2217
2218
2219
2220	On the w-level the following columns are written:<br>
2221
2222
2223
2224
2225
2226	<br>
2227
2228
2229
2230
2231
2232
2233
2234
2235
2236
2237	<table style="text-align: left; width: 100%;" cellpadding="2">
2238
2239
2240
2241
2242
2243	<tbody>
2244
2245
2246
2247
2248
2249	<tr>
2250
2251
2252
2253
2254
2255	<td style="vertical-align: middle;">k<br>
2256
2257
2258
2259
2260
2261	</td>
2262
2263
2264
2265
2266
2267	<td style="vertical-align: middle;">Vertical grid point
2268	index.</td>
2269
2270
2271
2272
2273
2274	</tr>
2275
2276
2277
2278
2279
2280	<tr>
2281
2282
2283
2284
2285
2286	<td style="vertical-align: middle;">zw<br>
2287
2288
2289
2290
2291
2292	</td>
2293
2294
2295
2296
2297
2298	<td style="vertical-align: middle;">Height of the grid
2299	point
2300	level (<font color="#000000">in </font>m).</td>
2301
2302
2303
2304
2305
2306	</tr>
2307
2308
2309
2310
2311
2312	<tr>
2313
2314
2315
2316
2317
2318	<td style="vertical-align: middle;">w'pt'</td>
2319
2320
2321
2322
2323
2324	<td style="vertical-align: middle;">Vertical subgrid-scale
2325	kinematic heat flux (<font color="#000000">in </font>K m/s).</td>
2326
2327
2328
2329
2330
2331	</tr>
2332
2333
2334
2335
2336
2337	<tr>
2338
2339
2340
2341
2342
2343	<td style="vertical-align: middle;">wpt</td>
2344
2345
2346
2347
2348
2349	<td style="vertical-align: middle;">Vertical total (
2350	subgrid-scale + resolved)
2351	kinematic heat flux (<font color="#000000">in </font>K m/s).</td>
2352
2353
2354
2355
2356
2357	</tr>
2358
2359
2360
2361
2362
2363	<tr>
2364
2365
2366
2367
2368
2369	<td style="vertical-align: middle;">w'u'</td>
2370
2371
2372
2373
2374
2375	<td style="vertical-align: middle;">u-component of the
2376	vertical subgrid-scale momentum flux (<font color="#000000">in </font>m<sup>2</sup>/s<sup>2</sup>).</td>
2377
2378
2379
2380
2381
2382	</tr>
2383
2384
2385
2386
2387
2388	<tr>
2389
2390
2391
2392
2393
2394	<td style="vertical-align: middle;">wu</td>
2395
2396
2397
2398
2399
2400	<td style="vertical-align: middle;">u-component of the
2401	total
2402	vertical momentum flux (
2403	subgrid-scale + resolved) (<font color="#000000">in </font>m<sup>2</sup>/s<sup>2</sup>).</td>
2404
2405
2406
2407
2408
2409	</tr>
2410
2411
2412
2413
2414
2415	<tr>
2416
2417
2418
2419
2420
2421	<td style="vertical-align: middle;">w'v'</td>
2422
2423
2424
2425
2426
2427	<td style="vertical-align: middle;">v-component of the
2428	vertical subgrid-scale momentum flux (<font color="#000000">in </font>m<sup>2</sup>/s<sup>2</sup>).</td>
2429
2430
2431
2432
2433
2434	</tr>
2435
2436
2437
2438
2439
2440	<tr>
2441
2442
2443
2444
2445
2446	<td style="vertical-align: middle;">wv</td>
2447
2448
2449
2450
2451
2452	<td style="vertical-align: middle;">v-component of the
2453	total
2454	vertical momentum flux (
2455	subgrid-scale + resolved) (<font color="#000000">in </font>m<sup>2</sup>/s<sup>2</sup>).</td>
2456
2457
2458
2459
2460
2461	</tr>
2462
2463
2464
2465
2466
2467
2468
2469
2470
2471
2472	</tbody>
2473
2474
2475
2476
2477
2478	</table>
2479
2480
2481
2482
2483
2484	<br>
2485
2486
2487
2488
2489
2490	</td>
2491
2492
2493
2494
2495
2496	</tr>
2497
2498
2499
2500
2501
2502	<tr>
2503
2504
2505
2506
2507
2508	<td style="vertical-align: top; text-align: center;">17 </td>
2509
2510
2511
2512
2513
2514	<td style="vertical-align: top;"><a name="LIST_PROFIL_1D"></a>LIST_PROFIL_1D
2515	</td>
2516
2517
2518
2519
2520
2521	<td style="vertical-align: top;">O </td>
2522
2523
2524
2525
2526
2527	<td style="vertical-align: top;">Ascii </td>
2528
2529
2530
2531
2532
2533	<td style="vertical-align: top;">This file contains the vertical
2534	profiles calculated by the
2535	1D-model within initial runs. The quantities saved are set
2536	model-internally and cannot be determined by the user. At the
2537	respective output times (see <a href="chapter_4.1.html#dt_pr_1d">dt_pr_1d</a>)
2538	a table with the following information is written to the file: The
2539	table header contains some basic information of the respective run
2540	(model version, run identifier consisting of basic file name and number
2541	of the job in the
2542	job chain (this number should always be 00, because the 1D-model is
2543	only switched on at initial runs), executing computer, date,
2544	time of the beginning of the run, output time). Afterwards the
2545	following columns appear:<br>
2546
2547
2548
2549
2550
2551
2552
2553
2554
2555
2556	<table style="text-align: left; width: 100%;" cellpadding="2">
2557
2558
2559
2560
2561
2562	<tbody>
2563
2564
2565
2566
2567
2568	<tr>
2569
2570
2571
2572
2573
2574	<td style="text-align: left; vertical-align: middle;">k<br>
2575
2576
2577
2578
2579
2580	</td>
2581
2582
2583
2584
2585
2586	<td style="text-align: left; vertical-align: middle;">Vertical
2587	grid point index.</td>
2588
2589
2590
2591
2592
2593	</tr>
2594
2595
2596
2597
2598
2599	<tr>
2600
2601
2602
2603
2604
2605	<td style="text-align: left; vertical-align: middle;">zu<br>
2606
2607
2608
2609
2610
2611	</td>
2612
2613
2614
2615
2616
2617	<td style="text-align: left; vertical-align: middle;">Height
2618	of the grid point
2619	level (<font color="#000000">in </font>m).</td>
2620
2621
2622
2623
2624
2625	</tr>
2626
2627
2628
2629
2630
2631	<tr>
2632
2633
2634
2635
2636
2637	<td style="text-align: left; vertical-align: middle;">u<br>
2638
2639
2640
2641
2642
2643	</td>
2644
2645
2646
2647
2648
2649	<td style="text-align: left; vertical-align: middle;">u-component
2650	of the wind
2651	velocity (<font color="#000000">in </font>m/s).</td>
2652
2653
2654
2655
2656
2657	</tr>
2658
2659
2660
2661
2662
2663	<tr>
2664
2665
2666
2667
2668
2669	<td style="text-align: left; vertical-align: middle;">v<br>
2670
2671
2672
2673
2674
2675	</td>
2676
2677
2678
2679
2680
2681	<td style="text-align: left; vertical-align: middle;">v-component
2682	of the wind
2683	velocity (<font color="#000000">in </font>m/s).</td>
2684
2685
2686
2687
2688
2689	</tr>
2690
2691
2692
2693
2694
2695	<tr>
2696
2697
2698
2699
2700
2701	<td style="text-align: left; vertical-align: middle;">pt<br>
2702
2703
2704
2705
2706
2707	</td>
2708
2709
2710
2711
2712
2713	<td style="text-align: left; vertical-align: middle;">Potential
2714	temperature (<font color="#000000">in </font>K).</td>
2715
2716
2717
2718
2719
2720	</tr>
2721
2722
2723
2724
2725
2726	<tr>
2727
2728
2729
2730
2731
2732	<td style="text-align: left; vertical-align: middle;">e<br>
2733
2734
2735
2736
2737
2738	</td>
2739
2740
2741
2742
2743
2744	<td style="text-align: left; vertical-align: middle;">Turbulent
2745	kinetic energy (<font color="#000000">in </font>m<sup>2</sup>/s<sup>2</sup>).</td>
2746
2747
2748
2749
2750
2751	</tr>
2752
2753
2754
2755
2756
2757	<tr>
2758
2759
2760
2761
2762
2763	<td style="text-align: left; vertical-align: middle;">rif<br>
2764
2765
2766
2767
2768
2769	</td>
2770
2771
2772
2773
2774
2775	<td style="text-align: left; vertical-align: middle;">Flux
2776	Richardson number</td>
2777
2778
2779
2780
2781
2782	</tr>
2783
2784
2785
2786
2787
2788	<tr>
2789
2790
2791
2792
2793
2794	<td style="text-align: left; vertical-align: middle;">Km<br>
2795
2796
2797
2798
2799
2800	</td>
2801
2802
2803
2804
2805
2806	<td style="text-align: left; vertical-align: middle;">Turbulent
2807	diffusion
2808	coefficient for momentum (<font color="#000000">in </font>m<sup>2</sup>/s).</td>
2809
2810
2811
2812
2813
2814	</tr>
2815
2816
2817
2818
2819
2820	<tr>
2821
2822
2823
2824
2825
2826	<td style="text-align: left; vertical-align: middle;">Kh<br>
2827
2828
2829
2830
2831
2832	</td>
2833
2834
2835
2836
2837
2838	<td style="text-align: left; vertical-align: middle;">Turbulent
2839	diffusion
2840	coefficient for heat (<font color="#000000">in </font>m<sup>2</sup>/s).</td>
2841
2842
2843
2844
2845
2846	</tr>
2847
2848
2849
2850
2851
2852	<tr>
2853
2854
2855
2856
2857
2858	<td style="text-align: left; vertical-align: middle;">l<br>
2859
2860
2861
2862
2863
2864	</td>
2865
2866
2867
2868
2869
2870	<td style="text-align: left; vertical-align: middle;"><font color="#000000">Mixing
2871	length (</font><font color="#000000">in </font><font color="#000000">m).</font></td>
2872
2873
2874
2875
2876
2877	</tr>
2878
2879
2880
2881
2882
2883
2884
2885
2886
2887
2888	</tbody>
2889
2890
2891
2892
2893
2894	</table>
2895
2896
2897
2898
2899
2900	<br>
2901
2902
2903
2904
2905
2906	</td>
2907
2908
2909
2910
2911
2912	</tr>
2913
2914
2915
2916
2917
2918	<tr>
2919
2920
2921
2922
2923
2924	<td style="vertical-align: top; text-align: center;">18 </td>
2925
2926
2927
2928
2929
2930	<td style="vertical-align: top;"><a name="CPU_MEASURES"></a>CPU_MEASURES
2931	</td>
2932
2933
2934
2935
2936
2937	<td style="vertical-align: top;">O </td>
2938
2939
2940
2941
2942
2943	<td style="vertical-align: top;">Ascii </td>
2944
2945
2946
2947
2948
2949	<td style="vertical-align: top;">Time measurements are
2950	accomplished through the subroutine <span style="font-family: monospace;">cpu_log.f90.</span><span style="font-size: 10pt;"></span> The file
2951	CPU_MEASURES contains a header with some basic information of the
2952	respective run
2953	(model version, run identifier consisting of basic file name and
2954	number of the job in the job chain, executing computer, date, time of
2955	the beginning of the run) and afterwards two tables with data of CPU
2956	times which have been consumed by certain model parts. The model parts
2957	analyzed in the first table do not overlap and the CPU times needed for
2958	them therefore approximately add up to the “total” value given in the
2959	first line of this table. In the second table (heading: special
2960	measures) overlaps (in particular with the parts described in the first
2961	table) are possible.  <br>
2962
2963
2964
2965
2966
2967	For each model part it is indicated in the following columns how much
2968	CPU time was needed (absolutely and relative), and how often it was
2969	called.  With runs on several processors the average values of all
2970	processors are indicated. In the case of parallel runs information for
2971	those processors with the largest and smallest CPU time follow as
2972	well as the standard deviation of all PEs from the average value. With
2973	good
2974	parallelization the CPU times on the individual processors should
2975	differ only little from each other and the standard deviation should be
2976	small.  </td>
2977
2978
2979
2980
2981
2982	</tr>
2983
2984
2985
2986
2987
2988	<tr>
2989
2990
2991
2992
2993
2994	<td style="vertical-align: top; text-align: center;">19 </td>
2995
2996
2997
2998
2999
3000	<td style="vertical-align: top;"><a name="HEADER"></a>HEADER </td>
3001
3002
3003
3004
3005
3006	<td style="vertical-align: top;">O </td>
3007
3008
3009
3010
3011
3012	<td style="vertical-align: top;">Ascii </td>
3013
3014
3015
3016
3017
3018	<td style="vertical-align: top;">
3019
3020
3021
3022
3023
3024	<p>Information about the selected model parameters (physical and
3025	numerical values) as well as general information about the run.  </p>
3026
3027
3028
3029
3030
3031
3032
3033
3034
3035
3036	<p>This file contains the values of all important steering
3037	parameters
3038	(numerical procedures, computing grid and model dimensions, boundary
3039	conditions, physical dimension, turbulence quantities, actions during
3040	the simulation, 1D-model-parameters) as well as data concerning the
3041	selected plot and list outputs. The headlines of the file list the
3042	program version used, date and time of the beginning of the run, the
3043	name of the executing computer, the run identifier (corresponds to the
3044	selected base file name) and the number of the run (number of the
3045	restart run). With parallel runs the number of processors as well as
3046	the assigned virtual processor net also appear. After these headlines
3047	run time and time step information appear (point of starting time,
3048	related to t=0 of the initial run, end-time, time actually reached, CPU
3049	time, etc.). If a model run is incorrectly terminated (e.g.
3050	run time error or excess of the permitted CPU time), information over
3051	the time reached and the necessary CPU time is missing (to understand:
3052	the file HEADER is written twice by the model; once briefly after
3053	beginning of the simulation (naturally here the information over the
3054	time reached is missing etc.) and then briefly before the normal end of
3055	the simulation. The second, now complete output overwrites the first
3056	output.).  </p>
3057
3058
3059
3060
3061
3062
3063
3064
3065
3066
3067	<p>At the end of the file, information about the values of user
3068	parameters (see <a href="chapter_3.7.html">chapter
3069	3.7</a> and <a href="targetliste:chapter_1.0.html#chapter%204.3">chapter
3070	4.3</a>) can be output by the user with the help of the subroutine <tt><font style="font-size: 11pt;" size="2">user_header</font></tt> (located in
3071	the file <tt><font style="font-size: 10pt;" size="2">user_interface.f90</font></tt>).
3072	If no user parameters were found, the string “<tt><font style="font-size: 10pt;" size="2">*** no user-defined variables found</font></tt>”
3073	appears at the end of the file.
3074	If user parameters were indicated, the string “<tt><font style="font-size: 11pt;" size="2">user-defined variables and actions</font></tt>”
3075	is printed, followed by informations about the user-defined subdomains
3076	for which
3077	profiles and time series are output. All further information to appear
3078	here, must be provided by the user (by appropriate
3079	WRITE statements in <tt><font style="font-size: 10pt;" size="2">user_header</font></tt>).</p>
3080
3081
3082
3083
3084
3085	</td>
3086
3087
3088
3089
3090
3091	</tr>
3092
3093
3094
3095
3096
3097	<tr>
3098
3099
3100
3101
3102
3103	<td style="vertical-align: top; text-align: center;">21 </td>
3104
3105
3106
3107
3108
3109	<td style="vertical-align: top;"><a name="PLOT2D_XY"></a>PLOT2D_XY
3110	</td>
3111
3112
3113
3114
3115
3116	<td style="vertical-align: top;">O<br>
3117
3118
3119
3120
3121
3122	</td>
3123
3124
3125
3126
3127
3128	<td style="vertical-align: top;">Binary<br>
3129
3130
3131
3132
3133
3134	</td>
3135
3136
3137
3138
3139
3140	<td style="vertical-align: top;">
3141
3142
3143
3144
3145
3146	<p>This file contains data of the two-dimensional horizontal
3147	cross sections written by the model (see <a href="chapter_4.2.html#data_output">data_output</a>)
3148	in a format readable by <a href="http://www.muk.uni-hannover.de/institut/software/iso2d_beschreibung.html">ISO2D</a>
3149	(the first record contains the coordinate information <tt><font style="font-size: 11pt;" size="2">dx</font></tt><font style="font-size: 11pt;" size="2">, </font><tt><font style="font-size: 11pt;" size="2">eta</font></tt><font style="font-size: 11pt;" size="2">, </font><tt><font style="font-size: 11pt;" size="2">hu</font></tt><font style="font-size: 11pt;" size="2">, <tt>ho</tt></font>, then
3150	the individual arrays follow). The data are visualized with the help of
3151	ISO2D using
3152	NAMELIST - parameter sets, which are directly written by the model to
3153	the
3154	local files <a href="#PLOT2D_XY_GLOBAL">PLOT2D_XY_GLOBAL</a>
3155	and <a href="#PLOT2D_XY_LOCAL">PLOT2D_XY_LOCAL</a>.  </p>
3156
3157
3158
3159
3160
3161
3162
3163
3164
3165
3166	<p>With parallel runs and choice of <a href="chapter_4.2.html#data_output_2d_on_each_pe">data_output_2d_on_each_pe</a>
3167	= <i>.T.</i> each processing element writes the data of its subdomain
3168	to a separate file with the name PLOT2D_XY_<processor-Id>,
3169	whereby <processor-Id> is a four digit number (e.g.
3170	PLOT2D_XY_0000). These files are not suitable for ISO2D, but after the
3171	end
3172	of the model run they can be combined to one file readable by ISO2D
3173	with
3174	the help of the program <tt><font style="font-size: 10pt;" size="2">combine_plot_fields.x</font></tt>.
3175	This tool expects the files of the individual processing
3176	elements under the names described above and outputs the combined file
3177	under the name PLOT2D_XY. Usually it is called by an appropriate OUTPUT
3178	- command (OC:) in the MRUN-configuration file. The tool writes
3179	informative messages about the actions accomplished into the job
3180	protocol (e.g., even if no files were found).
3181	By the call of <tt><font style="font-size: 10pt;" size="2">combine_plot_fields.x</font></tt>
3182	possibly existing files of the other cross sections (xz and/or yz)
3183	and three-dimensional arrays (see <a href="#PLOT3D_DATA">PLOT3D_DATA</a>)
3184	are also combined.  </p>
3185
3186
3187
3188
3189
3190
3191
3192
3193
3194
3195	<p>Further information about the output of plots of
3196	two-dimensional cross sections is found in the description of the run
3197	parameter <a href="chapter_4.2.html#data_output">data_output</a>.</p>
3198
3199
3200
3201
3202
3203	</td>
3204
3205
3206
3207
3208
3209	</tr>
3210
3211
3212
3213
3214
3215	<tr>
3216
3217
3218
3219
3220
3221	<td style="vertical-align: top; text-align: center;">22<br>
3222
3223
3224
3225
3226
3227	</td>
3228
3229
3230
3231
3232
3233	<td style="vertical-align: top;"><a name="PLOT2D_XZ"></a>PLOT2D_XZ
3234	</td>
3235
3236
3237
3238
3239
3240	<td style="vertical-align: top;">O<br>
3241
3242
3243
3244
3245
3246	</td>
3247
3248
3249
3250
3251
3252	<td style="vertical-align: top;">Binary<br>
3253
3254
3255
3256
3257
3258	</td>
3259
3260
3261
3262
3263
3264	<td style="vertical-align: top;">
3265
3266
3267
3268
3269
3270	<p>This file contains the data of the xz
3271	cross sections written by the model.  </p>
3272
3273
3274
3275
3276
3277	The description of the local file <a href="#PLOT2D_XY">PLOT2D_XY</a>
3278	applies to this file, respectively </td>
3279
3280
3281
3282
3283
3284	</tr>
3285
3286
3287
3288
3289
3290	<tr>
3291
3292
3293
3294
3295
3296	<td style="vertical-align: top; text-align: center;">23<br>
3297
3298
3299
3300
3301
3302	</td>
3303
3304
3305
3306
3307
3308	<td style="vertical-align: top;"><a name="PLOT2D_YZ"></a>PLOT2D_YZ
3309	</td>
3310
3311
3312
3313
3314
3315	<td style="vertical-align: top;">O<br>
3316
3317
3318
3319
3320
3321	</td>
3322
3323
3324
3325
3326
3327	<td style="vertical-align: top;">Binary<br>
3328
3329
3330
3331
3332
3333	</td>
3334
3335
3336
3337
3338
3339	<td style="vertical-align: top;">
3340
3341
3342
3343
3344
3345	<p>This file contains the data of the xz
3346	cross sections written by the model.  </p>
3347
3348
3349
3350
3351
3352	The description of the local file <a href="#PLOT2D_XY">PLOT2D_XY</a>
3353	applies to this file, respectively </td>
3354
3355
3356
3357
3358
3359	</tr>
3360
3361
3362
3363
3364
3365	<tr>
3366
3367
3368
3369
3370
3371	<td style="vertical-align: top; text-align: center;">27<br>
3372
3373
3374
3375
3376
3377	</td>
3378
3379
3380
3381
3382
3383	<td style="vertical-align: top;"><a name="PLOT2D_XY_LOCAL"></a>PLOT2D_XY_LOCAL
3384	</td>
3385
3386
3387
3388
3389
3390	<td style="vertical-align: top;">O<br>
3391
3392
3393
3394
3395
3396	</td>
3397
3398
3399
3400
3401
3402	<td style="vertical-align: top;">Ascii/ NAMELIST<br>
3403
3404
3405
3406
3407
3408	</td>
3409
3410
3411
3412
3413
3414	<td style="vertical-align: top;">
3415
3416
3417
3418
3419
3420	<p>NAMELIST - parameter sets, with which the plot layout of the
3421	data in the local file <a href="#PLOT2D_XY">PLOT2D_XY</a>
3422	can be steered, if they are visualized with the plot program <a href="http://www.muk.uni-hannover.de/institut/software/iso2d_beschreibung.html">ISO2D</a>.
3423	This file contains the so-called local parameter set (NAMELIST - group
3424	name: &LOCAL) required by ISO2D (one parameter set for each field
3425	present at the file PLOT2D_XY). After the model run these parameter
3426	sets can be edited by the user, if neccessary.  </p>
3427
3428
3429
3430
3431
3432
3433
3434
3435
3436
3437	<p>Additionally ISO2D still needs another so-called global
3438	parameter set. This is saved by the model to the local file <a href="#PLOT2D_XY_GLOBAL">PLOT2D_XY_GLOBAL</a>.
3439	Due to the fact that ISO2D expects global and local parameter sets on
3440	one and the same
3441	file, in fact the global parameter set first, the user has to append
3442	the
3443	contents of the file PLOT2D_XY_LOCAL to the file PLOT2D_XY_GLOBAL
3444	before the call of ISO2D (e.g. by an OUTPUT-command in the
3445	MRUN-configuration file: “PLOT2D_XY_LOCAL >> PLOT2D_XY_GLOBAL”).
3446	This relatively pedantic proceeding is due to the fact that the model
3447	can produce the file PLOT2D_XY_GLOBAL only at the end of the simulation
3448	(only then e.g. when the final value of the global ISO2D - parameter <a href="http://www.muk.uni-hannover.de/institut/software/iso2d_beschreibung.html#PLANZ">planz</a>
3449	is known), while the local parameter sets are written continuously
3450	to the file PLOT2D_XY_LOCAL during the run.</p>
3451
3452
3453
3454
3455
3456	</td>
3457
3458
3459
3460
3461
3462	</tr>
3463
3464
3465
3466
3467
3468	<tr>
3469
3470
3471
3472
3473
3474	<td style="vertical-align: top; text-align: center;">28<br>
3475
3476
3477
3478
3479
3480	</td>
3481
3482
3483
3484
3485
3486	<td style="vertical-align: top;"><a name="PLOT2D_XZ_LOCAL"></a>PLOT2D_XZ_LOCAL
3487	</td>
3488
3489
3490
3491
3492
3493	<td style="vertical-align: top;">O<br>
3494
3495
3496
3497
3498
3499	</td>
3500
3501
3502
3503
3504
3505	<td style="vertical-align: top;">Ascii/ NAMELIST<br>
3506
3507
3508
3509
3510
3511	</td>
3512
3513
3514
3515
3516
3517	<td style="vertical-align: top;">
3518
3519
3520
3521
3522
3523	<p>NAMELIST - parameter sets, with which the plot layout of the
3524	data in the local file <a href="#PLOT2D_XZ">PLOT2D_XZ</a>
3525	can be steered, if they are visualized with the plot program <a href="http://www.muk.uni-hannover.de/institut/software/iso2d_beschreibung.html">ISO2D</a>.
3526	</p>
3527
3528
3529
3530
3531
3532
3533
3534
3535
3536
3537	<p>The description of the local file <a href="#PLOT2D_XY_LOCAL">PLOT2D_XY_LOCAL</a>
3538	applies to this file, respectively. </p>
3539
3540
3541
3542
3543
3544	</td>
3545
3546
3547
3548
3549
3550	</tr>
3551
3552
3553
3554
3555
3556	<tr>
3557
3558
3559
3560
3561
3562	<td style="vertical-align: top; text-align: center;">29<br>
3563
3564
3565
3566
3567
3568	</td>
3569
3570
3571
3572
3573
3574	<td style="vertical-align: top;"><a name="PLOT2D_YZ_LOCAL"></a>PLOT2D_YZ_LOCAL
3575	</td>
3576
3577
3578
3579
3580
3581	<td style="vertical-align: top;">O<br>
3582
3583
3584
3585
3586
3587	</td>
3588
3589
3590
3591
3592
3593	<td style="vertical-align: top;">Ascii/ NAMELIST<br>
3594
3595
3596
3597
3598
3599	</td>
3600
3601
3602
3603
3604
3605	<td style="vertical-align: top;">
3606
3607
3608
3609
3610
3611	<p>NAMELIST - parameter sets, with which the plot layout of the
3612	data in the local file <a href="#PLOT2D_YZ">PLOT2D_YZ</a>
3613	can be steered, if they are visualized with the plot program <a href="http://www.muk.uni-hannover.de/institut/software/iso2d_beschreibung.html">ISO2D</a>.
3614	</p>
3615
3616
3617
3618
3619
3620
3621
3622
3623
3624
3625	<p>The description of the local file <a href="#PLOT2D_XY_LOCAL">PLOT2D_XY_LOCAL</a>
3626	applies to this file, respectively. </p>
3627
3628
3629
3630
3631
3632	</td>
3633
3634
3635
3636
3637
3638	</tr>
3639
3640
3641
3642
3643
3644	<tr>
3645
3646
3647
3648
3649
3650	<td style="vertical-align: top; text-align: center;">30<br>
3651
3652
3653
3654
3655
3656	</td>
3657
3658
3659
3660
3661
3662	<td style="vertical-align: top;"><a name="PLOT3D_DATA"></a>PLOT3D_DATA
3663	</td>
3664
3665
3666
3667
3668
3669	<td style="vertical-align: top;">O<br>
3670
3671
3672
3673
3674
3675	</td>
3676
3677
3678
3679
3680
3681	<td style="vertical-align: top;">Binary<br>
3682
3683
3684
3685
3686
3687	</td>
3688
3689
3690
3691
3692
3693	<td style="vertical-align: top;">
3694
3695
3696
3697
3698
3699	<p>This file contains the data of the three-dimensional arrays
3700	(see <a href="chapter_4.2.html#data_output">data_output</a>)
3701	written by the model in a format readable for the visualization
3702	software AVS. Beyond that AVS
3703	needs coordinate information, which are output into the
3704	local file <a href="#PLOT3D_COOR">PLOT3D_COOR</a>,
3705	as well as the local files <a href="#PLOT3D_FLD">PLOT3D_FLD</a>
3706	and <a href="#PLOT3D_FLD_COOR">PLOT3D_FLD_COOR</a>,
3707	which describe the structure of the files PLOT3D_DATA and PLOT3D_COOR
3708	in the so-called AVS-FLD-format. Due to
3709	the fact that AVS expects these information in only one (so-called FLD
3710	-) file, the content of the file PLOT3D_FLD_COOR must be appended to
3711	the file PLOT3D_FLD by the user after the end of the model run (e.g.
3712	with an appropriate OUTPUT - command in the MRUN - configuration file: "<span style="font-family: monospace;">cat PLOT3D_FLD_COOR >> PLOT3D_FLD</span>").
3713	</p>
3714
3715
3716
3717
3718
3719
3720
3721
3722
3723
3724	<p>With parallel runs each processing element writes the data of
3725	its subdomain to a separate file with the name
3726	PLOT3D_DATA_<Processor-Id>, where <Processor-Id> is a
3727	four digit number (e.g. PLOT3D_DATA_0000). These files are not suitable
3728	for AVS, but after the end of the model run they can be combined to one
3729	file readable for AVS with the help of the program <tt><font style="font-size: 10pt;" size="2">combine_plot_fields.x</font></tt>.
3730	This tool expects the files of the individual processing
3731	elements under the names described above and outputs the combined file
3732	into a new file PLOT3D_DATA. Usually it is called by an appropriate
3733	OUTPUT - command in the MRUN-configuration file. The tool
3734	writes informative messages about the accomplished actions into
3735	the job protocol (e.g., even if no files were
3736	found). By the call of <tt><font style="font-size: 10pt;" size="2">combine_plot_fields.x</font></tt>
3737	also possibly existing files with two-dimensional plot data (see e.g. <a href="#PLOT2D_XY">PLOT2D_XY</a>)
3738	are combined.  </p>
3739
3740
3741
3742
3743
3744
3745
3746
3747
3748
3749	<p>With parallel runs the output of data of large volume is also
3750	possible in compressed form. For this purpose the initialization
3751	parameter  <a href="chapter_4.2.html#do3d_compress">do3d_compress</a>
3752	= <i>.TRUE.</i> must be set and the desired output accuracy has to be
3753	indicated
3754	with the help of <a href="chapter_4.2.html#do3d_precision">do3d_precision</a>.
3755	In favorable cases the file size can be reduced by
3756	a factor of up to 5. For the visualization of compressed data a special
3757	AVS module (<tt><font style="font-size: 11pt;" size="2">read_compressed_field</font></tt>)
3758	and a further entry in the MRUN-configuration file are needed. More
3759	details can be found in <a href="chapter_4.5.6.html">chapter
3760	4.5.6</a>.</p>
3761
3762
3763
3764
3765
3766	</td>
3767
3768
3769
3770
3771
3772	</tr>
3773
3774
3775
3776
3777
3778	<tr>
3779
3780
3781
3782
3783
3784	<td style="vertical-align: top; text-align: center;">31<br>
3785
3786
3787
3788
3789
3790	</td>
3791
3792
3793
3794
3795
3796	<td style="vertical-align: top;"><a name="PLOT3D_COOR"></a>PLOT3D_COOR
3797	</td>
3798
3799
3800
3801
3802
3803	<td style="vertical-align: top;">O<br>
3804
3805
3806
3807
3808
3809	</td>
3810
3811
3812
3813
3814
3815	<td style="vertical-align: top;">Binary<br>
3816
3817
3818
3819
3820
3821	</td>
3822
3823
3824
3825
3826
3827	<td style="vertical-align: top;">
3828
3829
3830
3831
3832
3833	<p>Coordinate information concerning
3834	the three-dimensional arrays (see <a href="#PLOT3D_DATA">PLOT3D_DATA</a>)
3835	needed by the visualization software AVS.  </p>
3836
3837
3838
3839
3840
3841
3842
3843
3844
3845
3846	<p>The file PLOT3D_COOR should be saved by the user into the same
3847	permanent directory as the file PLOT3D_DATA.  </p>
3848
3849
3850
3851
3852
3853
3854
3855
3856
3857
3858	<p>For parallel runs PLOT3D_COOR is written by PE0 only.</p>
3859
3860
3861
3862
3863
3864	</td>
3865
3866
3867
3868
3869
3870	</tr>
3871
3872
3873
3874
3875
3876	<tr>
3877
3878
3879
3880
3881
3882	<td style="vertical-align: top; text-align: center;">32<br>
3883
3884
3885
3886
3887
3888	</td>
3889
3890
3891
3892
3893
3894	<td style="vertical-align: top;"><a name="PLOT3D_FLD"></a>PLOT3D_FLD
3895	</td>
3896
3897
3898
3899
3900
3901	<td style="vertical-align: top;">O<br>
3902
3903
3904
3905
3906
3907	</td>
3908
3909
3910
3911
3912
3913	<td style="vertical-align: top;">Ascii/  <br>
3914
3915
3916
3917
3918
3919	AVS-Fld </td>
3920
3921
3922
3923
3924
3925	<td style="vertical-align: top;">
3926
3927
3928
3929
3930
3931	<p>AVS-fld-file describing the three-dimensional
3932	array data, saved by the model into the local file <a href="#PLOT3D_DATA">PLOT3D_DATA</a>,
3933	needed by the visualization software AVS.  </p>
3934
3935
3936
3937
3938
3939
3940
3941
3942
3943
3944	<p>This file describes the structure of the file PLOT3D_DATA
3945	(e.g. number of arrays, array dimensions, data type etc.). It uses the
3946	so-called AVS-Fld-format. It also contains the name of the file
3947	(inclusive cycle number, but without path) under which the local file
3948	PLOT3D_DATA is saved (this is the file name given in the file
3949	connection statement of the MRUN – configuration) in the permanent
3950	directory of the user (possibly on remote computers). Under this name
3951	AVS expects the data which are to be visualized. If there is no file
3952	connection statement for PLOT3D_DATA indicated in the configuration
3953	file, that file (filename) is registered “unknown” in the file
3954	PLOT3D_FLD and the
3955	actual name must be inserted later by hand. The file PLOT3D_FLD should
3956	be saved by the user in the same permanent directory as PLOT3D_DATA, so
3957	that AVS can find the file PLOT3D_DATA without any problems. If the two
3958	files lie in different directories, then the path name of the file
3959	PLOT3D_DATA must be added.  </p>
3960
3961
3962
3963
3964
3965
3966
3967
3968
3969
3970	<p>AVS-fld-files are expected by AVS to have the
3971	suffix "<span style="font-family: monospace;">.fld</span>"<font face="Cumberland, monospace">.</font>
3972	Cycle numbers must not be attached behind this "<span style="font-family: monospace;">.fld</span>" suffix. This suffix is
3973	attached to the permanent file names (still after
3974	possible cycle numbers) by <span style="font-weight: bold;">mrun</span>
3975	if "<span style="font-family: monospace;">fld</span>"
3976	is indicated in the <a href="http://www.muk.uni-hannover.de/institut/software/mrun_beschreibung.html#Spalte6">column
3977	6 </a>of the file connection statement.  </p>
3978
3979
3980
3981
3982
3983
3984
3985
3986
3987
3988	<p>Likewise, AVS expects information about the coordinate
3989	system underlying the arrays on this file. This information is output
3990	by the model
3991	into the local file <a href="#PLOT3D_FLD_COOR">PLOT3D_FLD_COOR</a>,
3992	whose content the user has to append to the file PLOT3D_FLD after the
3993	end of the model run (e.g. with an appropriate OUTPUT-command in the
3994	MRUN-configuration file: “cat PLOT3D_FLD_COOR >>
3995	PLOT3D_FLD”).  </p>
3996
3997
3998
3999
4000
4001
4002
4003
4004
4005
4006	<p>For parallel runs, PLOT3D_FLD is produced by PE0 only.</p>
4007
4008
4009
4010
4011
4012	</td>
4013
4014
4015
4016
4017
4018	</tr>
4019
4020
4021
4022
4023
4024	<tr>
4025
4026
4027
4028
4029
4030	<td style="vertical-align: top; text-align: center;">33 </td>
4031
4032
4033
4034
4035
4036	<td style="vertical-align: top;"><a name="PLOT3D_FLD_COOR"></a>PLOT3D_FLD_COOR
4037	</td>
4038
4039
4040
4041
4042
4043	<td style="vertical-align: top;">O<br>
4044
4045
4046
4047
4048
4049	</td>
4050
4051
4052
4053
4054
4055	<td style="vertical-align: top;">Ascii/  <br>
4056
4057
4058
4059
4060
4061	AVS-Fld </td>
4062
4063
4064
4065
4066
4067	<td style="vertical-align: top;">
4068
4069
4070
4071
4072
4073	<p>File for the description of the coordinate information output
4074	by the model into the local file <a href="#PLOT3D_COOR">PLOT3D_COOR</a>,
4075	which is needed for the visualization of three-dimensional array data
4076	by visualization-software AVS.  </p>
4077
4078
4079
4080
4081
4082
4083
4084
4085
4086
4087	<p>This file describes the structure of the file PLOT3D_COOR
4088	(e.g. grid spacing, data type etc.) using the so-called AVS-Fld-format.
4089	It also contains the name of the file (inclusive cycle number, but
4090	without path) into which the local file PLOT3D_COOR (this is the file
4091	name described in the file connection statement of the MRUN -
4092	configuration file) is output in the permanent directory of the user
4093	(possibly on remote computers). Under this name AVS expects the data
4094	which are to be visualized. If there is no file connection statement
4095	for
4096	PLOT3D_COOR indicated in the configuration file, that file is
4097	registered as "unknown" in the file
4098	PLOT3D_FLD_COOR and the actual name
4099	must be inserted later by hand.  </p>
4100
4101
4102
4103
4104
4105
4106
4107
4108
4109
4110	<p>AVS expects the information contained in the file
4111	PLOT3D_FLD_COOR, as well as the remaining information about the
4112	three-dimensional arrays output by the model (see <a href="#PLOT3D_FLD">PLOT3D_FLD</a>)
4113	in one and the same file. This is satisfied by appending the file
4114	PLOT3D_FLD_COOR after the end of a run are to the
4115	file PLOT3D_FLD (e.g. with an appropriate OUTPUT-command in the
4116	MRUN-configuration file: “cat PLOT3D_FLD_COOR >>
4117	PLOT3D_FLD”).  </p>
4118
4119
4120
4121
4122
4123
4124
4125
4126
4127
4128	<p>For parallel runs, PLOT3D_FLD_COOR is written by PE0 only.</p>
4129
4130
4131
4132
4133
4134	</td>
4135
4136
4137
4138
4139
4140	</tr>
4141
4142
4143
4144
4145
4146	<tr>
4147
4148
4149
4150
4151
4152	<td style="vertical-align: top; text-align: center;">
4153
4154
4155
4156
4157
4158	<p align="center">40  </p>
4159
4160
4161
4162
4163
4164
4165
4166
4167
4168
4169	<p align="center">and/or  <br>
4170
4171
4172
4173
4174
4175	possibly  </p>
4176
4177
4178
4179
4180
4181
4182
4183
4184
4185
4186	<p align="center">40-49</p>
4187
4188
4189
4190
4191
4192	</td>
4193
4194
4195
4196
4197
4198	<td style="vertical-align: top;">
4199
4200
4201
4202
4203
4204	<p><a name="PLOT1D_DATA"></a>PLOT1D_DATA  </p>
4205
4206
4207
4208
4209
4210
4211
4212
4213
4214
4215	<p>and/or  <br>
4216
4217
4218
4219
4220
4221	possibly  </p>
4222
4223
4224
4225
4226
4227	PLOT1D_DATA_0  <br>
4228
4229
4230
4231
4232
4233	PLOT1D_DATA_1  </td>
4234
4235
4236
4237
4238
4239	<td style="vertical-align: top;">O </td>
4240
4241
4242
4243
4244
4245	<td style="vertical-align: top;">Ascii </td>
4246
4247
4248
4249
4250
4251	<td style="vertical-align: top;">
4252
4253
4254
4255
4256
4257	<p>This file contains data (possibly horizontally and/or
4258	temporally averaged) of the vertical profiles (see <a href="chapter_4.2.html#data_output_pr">data_output_pr</a>)
4259	written by the model in a format readable by <a href="http://www.muk.uni-hannover.de/institut/software/profil_beschreibung.html">profil</a>. It is created only if <a href="chapter_4.2.html#data_output_format">data_output_format</a> = <span style="font-style: italic;">'profil'</span> is assigned. This file's format is suitable to be read by the plot software <a href="http://www.muk.uni-hannover.de/institut/software/profil_beschreibung.html">profil</a>.
4260	Each data point of the profiles is output in one single line (1st
4261	column: height in m, 2nd column: value of the respective quantity).
4262	Within the file, data
4263	of the individual profiles are located one behind the other. The order
4264	of the data in the file follows the order used in the assignment for <b>data_output_pr</b>
4265	(<b>data_output_pr</b> = <span style="font-style: italic;">'u'</span>, <span style="font-style: italic;">'v'</span>,…
4266	means that the file starts with the data of the u-component profile,
4267	followed by the v-component profile, etc.). </p>
4268	<p><br>
4269	The data can only be visualized with <span style="font-weight: bold;">profil</span>
4270	using NAMELIST-parameter sets, which are saved by the
4271	model into the local file <a href="#PLOT1D_PAR">PLOT1D_PAR</a>.  </p>
4272
4273
4274
4275
4276
4277
4278
4279
4280
4281
4282	<p>The profile data written to the file are described with the
4283	run parameter <a href="chapter_4.2.html#data_output_pr">data_output_pr</a>.
4284	Plots produced with these data using the parameter file PLOT1D_PAR do
4285	not have to contain all these profiles. The profiles which can be drawn
4286	in the plot are described with run parameter <a href="chapter_4.2.html#cross_profiles">cross_profiles</a>.
4287	By subsequent editing of the file PLOT1D_PAR all profiles can be
4288	plotted (also the basic layout of the plots can be
4289	changed). For orientation, each profile existing on the file
4290	PLOT1D_DATA, starts with a comment line, which indicates the
4291	presented variable and the output time. The text of these comment
4292	lines is used as a legend in the plot. The very first line of the file
4293	is a
4294	comment line, containing information about the used model version, the
4295	run identifier (base file name + number of the respective restart
4296	run), the name of the executing computer, as well as the date and time
4297	of the beginning of the run. At the end of this comment line is the
4298	name
4299	of the subdomain, to which the profiles belong (see <a href="chapter_4.1.html#statistic_regions">statistic_regions</a>).
4300	By default, the profiles present averages of the total model domain. If
4301	the model has to produce profiles for other subdomains beyond that, up
4302	to 9 further files (units No. 41-49) are created, whereby the number of
4303	the respective subdomain is attached
4304	to the file name (e.g. PLOT1D_DATA_1). The name of the file with the
4305	data of the total
4306	domain in this case reads PLOT1D_DATA_0.  </p>
4307
4308
4309
4310
4311
4312
4313
4314
4315
4316
4317	<p>For presentation in the same plot, profile data of the restart
4318	runs can be attached to existing data of preceding runs of a job chain.
4319	One can do this with the file attribute <a href="http://www.muk.uni-hannover.de/institut/software/mrun_beschreibung.html#tra">tra</a>
4320	in the file connection statement. The model produces a parameter file
4321	(PLOT1D_PAR) for these combined data, if the run parameter is set <a href="chapter_4.2.html#use_prior_plot1d_parameters">use_prior_plot1d_parameters</a>
4322	= <i>.T</i>. If this is omitted, then the parameter file gives
4323	wrong plots (i.e. <span style="font-family: monospace;">use_prior_plot1d_parameters
4324	= .T.</span> and "<span style="font-family: monospace;">tra</span>"
4325	must be specified together)!  </p>
4326
4327
4328
4329
4330
4331
4332
4333
4334
4335
4336	<p>Further information about output of
4337	vertical profile data is given in the description of the run parameter <a href="chapter_4.2.html#data_output_pr">data_output_pr</a>.</p>
4338
4339
4340
4341
4342
4343	</td>
4344
4345
4346
4347
4348
4349	</tr>
4350
4351
4352
4353
4354
4355
4356
4357
4358
4359
4360
4361	<tr>
4362
4363
4364
4365
4366
4367	<td style="vertical-align: top; text-align: center;">80 </td>
4368
4369
4370
4371
4372
4373	<td style="vertical-align: top;"><a name="PARTICLE_INFOS"></a>PARTICLE_INFOS/
4374	</td>
4375
4376
4377
4378
4379
4380	<td style="vertical-align: top;">O </td>
4381
4382
4383
4384
4385
4386	<td style="vertical-align: top;">Ascii </td>
4387
4388
4389
4390
4391
4392	<td style="vertical-align: top;">This
4393	file is created in case of particle transport (see the <a href="chapter_4.2.html#particles_package">particles
4394	package</a>). It contains statistical informations about the number of
4395	particles used and about the number of particles exchanged between each
4396	single PE. These informations are output after every timestep if
4397	switched on by parameter <a href="chapter_4.2.html#write_particle_statistics">write_particle_statistics</a>.
4398	</td>
4399
4400
4401
4402
4403
4404	</tr>
4405
4406
4407
4408
4409
4410	<tr>
4411
4412
4413
4414
4415
4416	<td style="vertical-align: top; text-align: center;">81 </td>
4417
4418
4419
4420
4421
4422	<td style="vertical-align: top;"><a name="PLOTSP_X_PAR"></a>PLOTSP_X_PAR
4423	</td>
4424
4425
4426
4427
4428
4429	<td style="vertical-align: top;">O </td>
4430
4431
4432
4433
4434
4435	<td style="vertical-align: top;">Ascii/<br>
4436
4437
4438
4439
4440
4441	NAMELIST </td>
4442
4443
4444
4445
4446
4447	<td style="vertical-align: top;">This
4448	file is created if spectra along x are calculated and output (see the <a href="chapter_4.2.html#particles_package">spectra
4449	package</a>). It contains the NAMELIST parameter set, with which the
4450	layout of a plot
4451	of the data in the local file <a href="#PLOTSP_X_DATA">PLOTSP_X_DATA</a>
4452	can be steered, if these data are plotted with the plot software <a href="http://www.muk.uni-hannover.de/institut/software/profil_beschreibung.html">profil</a>.<br>
4453
4454
4455
4456
4457
4458
4459
4460
4461
4462
4463	<p>It contains the so-called RAHMEN (frame)- and
4464	CROSS-parameter sets (NAMELIST- group names <span style="font-style: normal;">&RAHMEN and/or &CROSS</span>)
4465	needed by <span style="font-weight: bold;">profil</span>.
4466	The user can edit these parameter sets (and thus all details of the
4467	plot layout) after the run.<br>
4468
4469
4470
4471
4472
4473	</p>
4474
4475
4476
4477
4478
4479
4480
4481
4482
4483
4484	<p>By default, for one quantity, all spectra at different heights
4485	are plotted into a single panel. Different colors and line styles are
4486	used for each height. Panels of up to four quantities are arranged on
4487	one page in two lines (and two columns). More quantities are plotted on
4488	additional page(s). If there is more than one output time (see <a href="chapter_4.2.html#dt_dosp">dt_dosp</a>),
4489	additional pages will be plotted for each single output time. </p>
4490
4491
4492
4493
4494
4495	</td>
4496
4497
4498
4499
4500
4501	</tr>
4502
4503
4504
4505
4506
4507	<tr>
4508
4509
4510
4511
4512
4513	<td style="vertical-align: top; text-align: center;">82<br>
4514
4515
4516
4517
4518
4519	</td>
4520
4521
4522
4523
4524
4525	<td style="vertical-align: top;"><a name="PLOTSP_X_DATA"></a>PLOTSP_X_DATA
4526	</td>
4527
4528
4529
4530
4531
4532	<td style="vertical-align: top;">O<br>
4533
4534
4535
4536
4537
4538	</td>
4539
4540
4541
4542
4543
4544	<td style="vertical-align: top;">Ascii<br>
4545
4546
4547
4548
4549
4550	</td>
4551
4552
4553
4554
4555
4556	<td style="vertical-align: top;">This
4557	file is created if spectra along x are calculated and output (see the <a href="chapter_4.2.html#particles_package">spectra
4558	package</a>). It contains the spectral data along x (see <a href="chapter_4.2.html#data_output_sp">data_output_sp</a>)
4559	in a format readable by <a href="http://www.muk.uni-hannover.de/institut/software/profil_beschreibung.html">profil</a>.
4560	The data can only be visualized with <span style="font-weight: bold;">profil</span>
4561	using NAMELIST parameter sets, which are written by
4562	the model to the local file <a href="#PLOTSP_X_PAR">PLOTSP_X_PAR</a>.<br>
4563
4564
4565
4566
4567
4568	<br>
4569
4570
4571
4572
4573
4574	Regardless of the (sub)set of spectra specified by <a href="chapter_4.2.html#plot_spectra_level">plot_spectra_level</a>
4575	for actual plotting, this file contains all data of spectra specified
4576	by <a href="chapter_4.2.html#comp_spectra_level">comp_spectra_level</a>.<br>
4577
4578
4579
4580
4581
4582	<br>
4583
4584
4585
4586
4587
4588	<font>Each data point of a spectrum is output in a single line
4589	(1st column:
4590	wavenumber, 2nd column: spectral coefficient). If spectra are to be
4591	calculated and output for more than one height (see </font><font><a href="chapter_4.2.html#comp_spectra_level"><span lang="en-GB"><font face="Thorndale">comp_spectra_level</font></span></a></font><font>),
4592	the spectral coefficients for the further heights can be found in the
4593	subsequent columns. </font>The order
4594	of the data in the file follows the order used in the assignment for <span style="font-style: italic;"></span><span style="font-style: italic;"></span><a href="chapter_4.2.html#data_output_sp">data_output_sp</a>.<br>
4595
4596
4597
4598
4599
4600	<br>
4601
4602
4603
4604
4605
4606	For orientation, a header of comment lines (one for each height level)
4607	is placed in front of the spectral data of each quantity. They indicate
4608	the respective quantity and the output time. The text of these comment
4609	lines is used as a legend in the plot. </td>
4610
4611
4612
4613
4614
4615	</tr>
4616
4617
4618
4619
4620
4621	<tr>
4622
4623
4624
4625
4626
4627	<td style="vertical-align: top; text-align: center;">83<br>
4628
4629
4630
4631
4632
4633	</td>
4634
4635
4636
4637
4638
4639	<td style="vertical-align: top;"><a name="PLOTSP_Y_PAR"></a>PLOTSP_Y_PAR
4640	</td>
4641
4642
4643
4644
4645
4646	<td style="vertical-align: top;">O<br>
4647
4648
4649
4650
4651
4652	</td>
4653
4654
4655
4656
4657
4658	<td style="vertical-align: top;">Ascii<br>
4659
4660
4661
4662
4663
4664	</td>
4665
4666
4667
4668
4669
4670	<td style="vertical-align: top;">This
4671	file is created if spectra along y are calculated and output (see the <a href="chapter_4.2.html#particles_package">spectra
4672	package</a>). It contains the NAMELIST parameter set, with which the
4673	layout of a plot
4674	of the data in the local file <a href="#PLOTSP_Y_DATA">PLOTSP_Y_DATA</a>
4675	can be steered, if these data are plotted with the plot software <a href="http://www.muk.uni-hannover.de/institut/software/profil_beschreibung.html">profil</a>.<br>
4676
4677
4678
4679
4680
4681	<br>
4682
4683
4684
4685
4686
4687	For more details see <a href="#PLOTSP_X_PAR">PLOTSP_X_PAR</a>.<br>
4688
4689
4690
4691
4692
4693	</td>
4694
4695
4696
4697
4698
4699	</tr>
4700
4701
4702
4703
4704
4705	<tr>
4706
4707
4708
4709
4710
4711	<td style="vertical-align: top; text-align: center;">84<br>
4712
4713
4714
4715
4716
4717	</td>
4718
4719
4720
4721
4722
4723	<td style="vertical-align: top;"><a name="PLOTSP_Y_DATA"></a>PLOTSP_Y_DATA</td>
4724
4725
4726
4727
4728
4729	<td style="vertical-align: top;">O<br>
4730
4731
4732
4733
4734
4735	</td>
4736
4737
4738
4739
4740
4741	<td style="vertical-align: top;">Ascii<br>
4742
4743
4744
4745
4746
4747	</td>
4748
4749
4750
4751
4752
4753	<td style="vertical-align: top;">This
4754	file is created if spectra along x are calculated and output (see the <a href="chapter_4.2.html#particles_package">spectra
4755	package</a>). It contains the spectral data along y (see <a href="chapter_4.2.html#data_output_sp">data_output_sp</a>)
4756	in a format readable by <a href="http://www.muk.uni-hannover.de/institut/software/profil_beschreibung.html">profil</a>.
4757	The data can only be visualized with <span style="font-weight: bold;">profil</span>
4758	using NAMELIST parameter sets, which are written by
4759	the model to the local file <a href="#PLOTSP_Y_PAR">PLOTSP_Y_PAR</a>.<br>
4760
4761
4762
4763
4764
4765	<br>
4766
4767
4768
4769
4770
4771	For more details see <a href="#PLOTSP_X_DATA">PLOTSP_X_DATA</a>.</td>
4772
4773
4774
4775
4776
4777	</tr>
4778
4779
4780
4781
4782
4783	<tr>
4784
4785
4786
4787
4788
4789	<td style="vertical-align: top; text-align: center;">85<br>
4790
4791
4792
4793
4794
4795	</td>
4796
4797
4798
4799
4800
4801	<td style="vertical-align: top;"><a name="PARTICLE_DATA"></a>PARTICLE_DATA/</td>
4802
4803
4804
4805
4806
4807	<td style="vertical-align: top;">O<br>
4808
4809
4810
4811
4812
4813	</td>
4814
4815
4816
4817
4818
4819	<td style="vertical-align: top;">Binary<br>
4820
4821
4822
4823
4824
4825	</td>
4826
4827
4828
4829
4830
4831	<td style="vertical-align: top;">This
4832	file is created if particle transport is switched on (see the <a href="chapter_4.2.html#particles_package">particles
4833	package</a>) and contains all particle data for one or several output
4834	times (see <a href="chapter_4.2.html#dt_write_particle_data">dt_write_particle_data</a>).<br>
4835
4836
4837
4838
4839
4840	<br>
4841
4842
4843
4844
4845
4846	The first record of this file contains an identification string (PALM
4847	version number, run identifier, etc., 80 characters long). The second
4848	record also contains a version string (80 characters long) followed by
4849	two records with particle group informations (see file <span style="font-family: monospace;">check_open.f90</span>). Then, for each
4850	output time, two records follow, where the first one gives some general
4851	information (numbers of particles, etc.) and the second one contains
4852	the actual particle data. A FORTRAN TYPE structure is used for storing
4853	the particle attributes. See file <span style="font-family: monospace;">advec_particles.f90</span>
4854	for the detailed format.</td>
4855
4856
4857
4858
4859
4860	</tr>
4861
4862
4863
4864
4865
4866	<tr>
4867
4868
4869
4870
4871
4872	<td style="vertical-align: top; text-align: center;">90</td>
4873
4874
4875
4876
4877
4878	<td style="vertical-align: top;"><a name="PARTICLE_RESTART_DATA_IN"></a>PARTICLE_RESTART_<br>
4879
4880
4881
4882
4883
4884	DATA_IN/</td>
4885
4886
4887
4888
4889
4890	<td style="vertical-align: top;">I<br>
4891
4892
4893
4894
4895
4896	</td>
4897
4898
4899
4900
4901
4902	<td style="vertical-align: top;">Binary<br>
4903
4904
4905
4906
4907
4908	</td>
4909
4910
4911
4912
4913
4914	<td style="vertical-align: top;">Binary
4915	data, which are read in by the model at the beginning
4916	of a restart run (see <a href="chapter_3.3.html">chapter
4917	3.3</a>). The appropriate file must have been written by the preceding
4918	job of the job chain (see <a href="#PARTICLE_RESTART_DATA_OUT">PARTICLE_RESTART_DATA_OUT</a>).
4919	This file is needed if particle transport is switched on (see the <a href="chapter_4.2.html#particles_package">particles
4920	package</a>) and contains all particle informations (particle
4921	positions, velocities, etc.) from the end of the preceding run.
4922	Concerning runs on
4923	several processors it has to be noted that each processing element
4924	reads its own file and that the file content is processor-dependent.
4925	The
4926	number of processors which can be used must not be changed during a job
4927	chain and/or if a job chain is continued. <br>
4928
4929
4930
4931
4932
4933	<br>
4934
4935
4936
4937
4938
4939	The first record of this file contains a version number (four character
4940	string) of the subroutine, which output the data that follows (<span style="font-family: monospace;">write_particles</span>, see end of
4941	file <span style="font-family: monospace;">advec_particles.f90</span>).
4942	This number has to
4943	agree with the version number of the subroutine which is reading the
4944	file
4945	(<span style="font-family: monospace;">init_parrticles.f90</span>) in
4946	case of a restart run. Otherwise the model run
4947	is aborted. Version numbers are changed whenever new code revisions
4948	require a change of the file format. Some general informations like the
4949	number of particles stored in the file, the number of particle groups,
4950	etc.. are stored in the second record. The third record includes the
4951	particles to be released at the source and the fourth record contains
4952	all current particles. In case that particle tails are used (see <a href="chapter_4.2.html#maximum_number_of_tailpoints">maximum_number_of_tailpoints</a>),
4953	a further record may follow, which contains the particle tail
4954	informations. A FORTRAN TYPE structure is used for storing the particle
4955	attributes. For detailed informations about the file format see the
4956	corresponding READ statements in file <span style="font-family: monospace;">init_particles.f90</span> .<br>
4957
4958
4959
4960
4961
4962	</td>
4963
4964
4965
4966
4967
4968	</tr>
4969
4970
4971
4972
4973
4974	<tr>
4975
4976
4977
4978
4979
4980	<td style="vertical-align: top; text-align: center;">90<br>
4981
4982
4983
4984
4985
4986	</td>
4987
4988
4989
4990
4991
4992	<td style="vertical-align: top;"><a name="PARTICLE_RESTART_DATA_IN"></a>PARTICLE_RESTART_<br>
4993
4994
4995
4996
4997
4998	DATA_OUT/</td>
4999
5000
5001
5002
5003
5004	<td style="vertical-align: top;">O<br>
5005
5006
5007
5008
5009
5010	</td>
5011
5012
5013
5014
5015
5016	<td style="vertical-align: top;">Binary<br>
5017
5018
5019
5020
5021
5022	</td>
5023
5024
5025
5026
5027
5028	<td style="vertical-align: top;">Binary
5029	data, which are output at the end of the
5030	run and possibly needed by restart runs (see <a href="chapter_3.3.html">chapter
5031	3.3</a>) for the initialization. This output file is then read as
5032	file <a href="#PARTICLE_RESTART_DATA_IN">PARTICLE_RESTART_DATA_IN</a>.
5033	The file is only written if particle transport is switched on (see the <a href="chapter_4.2.html#particles_package">particles
5034	package</a>). For a more detailed description of the file structure see
5035	<a href="#PARTICLE_RESTART_DATA_IN">PARTICLE_RESTART_DATA_IN</a>.</td>
5036
5037
5038
5039
5040
5041	</tr>
5042
5043
5044
5045
5046
5047
5048
5049
5050
5051
5052
5053	<tr>
5054
5055
5056
5057
5058
5059	<td style="vertical-align: top; text-align: center;">90<br>
5060
5061
5062
5063
5064
5065	</td>
5066
5067
5068
5069
5070
5071	<td style="vertical-align: top;">
5072
5073
5074
5075
5076
5077	<p><a name="PLOT1D_PAR"></a>PLOT1D_PAR  </p>
5078
5079
5080
5081
5082
5083
5084
5085
5086
5087
5088	<p>and/or  <br>
5089
5090
5091
5092
5093
5094	possibly  </p>
5095
5096
5097
5098
5099
5100
5101
5102
5103
5104
5105	<p>PLOT1D_PAR_0  <br>
5106
5107
5108
5109
5110
5111	PLOT1D_PAR_1  <br>
5112
5113
5114
5115
5116
5117
5118	.  <br>
5119
5120
5121
5122
5123
5124
5125	.  <br>
5126
5127
5128
5129
5130
5131
5132	.  <br>
5133
5134
5135
5136
5137
5138	PLOT1D_PAR_9</p>
5139
5140
5141
5142
5143
5144	</td>
5145
5146
5147
5148
5149
5150	<td style="vertical-align: top;">O<br>
5151
5152
5153
5154
5155
5156	</td>
5157
5158
5159
5160
5161
5162	<td style="vertical-align: top;">Ascii/ NAMELIST<br>
5163
5164
5165
5166
5167
5168	</td>
5169
5170
5171
5172
5173
5174	<td style="vertical-align: top;">
5175
5176
5177
5178
5179
5180	<p>NAMELIST parameter set, with which the layout of a plot
5181	of the data in the local file <a href="#PLOT1D_DATA">PLOT1D_DATA</a>
5182	can be steered, if these data are visualized with the plot program <a href="http://www.muk.uni-hannover.de/institut/software/profil_beschreibung.html">profil</a>.
5183	</p>
5184
5185
5186
5187
5188
5189
5190
5191
5192
5193
5194	<p>This file contains the so-called RAHMEN (frame)- and
5195	CROSS-parameter sets (NAMELIST- group names <span style="font-style: normal;">&RAHMEN and/or &CROSS</span>)
5196	needed by <span style="font-weight: bold;">profil</span>.
5197	These parameter sets (and thus all details of the plot layout) can be
5198	edited after the model run by the user. By default, all profiles of one
5199	variable saved at different times are drawn into one panel. Different
5200	colors are used for each output time. Which profiles are drawn
5201	into which plane and how these planes are arranged on the
5202	plot, is determined with the parameters <a href="chapter_4.2.html#cross_profiles">cross_profiles</a>, <a href="chapter_4.2.html#profile_columns">profile_columns</a>
5203	and <a href="chapter_4.2.html#profile_rows">profile_rows</a>.  </p>
5204
5205
5206
5207
5208
5209
5210
5211
5212
5213
5214	<p>The file PLOT1D_PAR is created by the model briefly before
5215	the end of a run. If a model run crashes uncontrolled (run time
5216	errors or CPU - time exceeded), this file is usually missing, although
5217	profile data were saved to the file PLOT1D_DATA.  </p>
5218
5219
5220
5221
5222
5223
5224
5225
5226
5227
5228	<p>If the model has to create profiles for different subdomains
5229	(see <a href="chapter_4.1.html#statistic_regions">statistic_regions</a>),
5230	further files are created, whereby the file name includes the number of
5231	the respective subdomain (e.g. PLOT1D_PAR_1). In this case the name of
5232	the file with NAMELIST parameters of the total domain is
5233	PLOT1D_PAR_0.  </p>
5234
5235
5236
5237
5238
5239
5240
5241
5242
5243
5244	<p>For presentation in the same plot, profile data of the restart
5245	runs can be appended to existing data of preceding runs of a job chain.
5246	One can do this with the file attribute <a href="http://www.muk.uni-hannover.de/institut/software/mrun_beschreibung.html#tra">tra</a>
5247	in the file connection statement for PLOT1D_DATA. The model produces
5248	a parameter file PLOT1D_PAR for these combined data, if the run
5249	parameter is set <a href="chapter_4.2.html#use_prior_plot1d_parameters">use_prior_plot1d_parameters</a>
5250	= <i>.T</i>. If this is omitted, then the parameter file gives
5251	wrong plots (i.e. <span style="font-family: monospace;">use_prior_plot1d_parameters
5252	= .T.</span> and "<span style="font-family: monospace;">tra</span>"
5253	must be specified together)!</p>
5254
5255
5256
5257
5258
5259	</td>
5260
5261
5262
5263
5264
5265	</tr>
5266
5267
5268
5269
5270
5271	<tr>
5272
5273
5274
5275
5276
5277	<td style="vertical-align: top; text-align: center;">90<br>
5278
5279
5280
5281
5282
5283	</td>
5284
5285
5286
5287
5288
5289	<td style="vertical-align: top;"><a name="PLOT2D_XY_GLOBAL"></a>PLOT2D_XY_GLOBAL</td>
5290
5291
5292
5293
5294
5295	<td style="vertical-align: top;">O<br>
5296
5297
5298
5299
5300
5301	</td>
5302
5303
5304
5305
5306
5307	<td style="vertical-align: top;">Ascii/  <br>
5308
5309
5310
5311
5312
5313	NAMELIST</td>
5314
5315
5316
5317
5318
5319	<td style="vertical-align: top;">
5320
5321
5322
5323
5324
5325	<p>NAMELIST parameter set, with which the plot layout
5326	of the data in local file <a href="#PLOT2D_XY">PLOT2D_XY</a>
5327	can be steered, if they are visualized with the plot program <a href="http://www.muk.uni-hannover.de/institut/software/iso2d_beschreibung.html">iso2d</a>.
5328	This file contains the so-called global parameter set (NAMELIST - group
5329	name: &GLOBAL) needed by <span style="font-weight: bold;">iso2d</span>.
5330	This parameter set can be edited
5331	after the model run by the user. By default, the arrays are drawn using
5332	isolines and each array
5333	will be drawn onto a separate page (thus no color shading
5334	presentation, no vector arrows, streamlines etc.).  </p>
5335
5336
5337
5338
5339
5340
5341
5342
5343
5344
5345	<p>Additionally <span style="font-weight: bold;">iso2d</span>
5346	needs the so-called local parameter
5347	sets. These are saved by the model to the local file <a href="#PLOT2D_XY_LOCAL">PLOT2D_XY_LOCAL</a>.
5348	Due to the fact that <span style="font-weight: bold;">iso2d</span>
5349	expects global and local parameter sets on one and the same
5350	file, in fact the global parameter set first, the user has to append
5351	the contents of the file PLOT2D_XY_LOCAL to the file PLOT2D_XY_GLOBAL
5352	before call of <span style="font-weight: bold;">iso2d</span> (e.g. by
5353	an OUTPUT - command in the MRUN -
5354	configuration file: “cat PLOT2D_XY_LOCAL >> PLOT2D_XY_GLOBAL”).
5355	This
5356	relatively pedantic proceedure is due to the fact that the model can
5357	create the file PLOT2D_XY_GLOBAL only at the end of the simulation
5358	(only then, when the final value of the global <span style="font-weight: bold;">iso2d</span>-parameter <a href="http://www.muk.uni-hannover.de/institut/software/iso2d_beschreibung.html#PLANZ">planz</a>
5359	is known), while the local parameter sets are written continuously
5360	to the file PLOT2D_XY_LOCAL during the run. Since the file
5361	PLOT2D_XY_GLOBAL needs to be addressed only briefly once, output-unit
5362	90 is used, which is also used for other files.</p>
5363
5364
5365
5366
5367
5368	</td>
5369
5370
5371
5372
5373
5374	</tr>
5375
5376
5377
5378
5379
5380	<tr>
5381
5382
5383
5384
5385
5386	<td style="vertical-align: top; text-align: center;">90<br>
5387
5388
5389
5390
5391
5392	</td>
5393
5394
5395
5396
5397
5398	<td style="vertical-align: top;"><a name="PLOT2D_XZ_GLOBAL"></a>PLOT2D_XZ_GLOBAL</td>
5399
5400
5401
5402
5403
5404	<td style="vertical-align: top;">O<br>
5405
5406
5407
5408
5409
5410	</td>
5411
5412
5413
5414
5415
5416	<td style="vertical-align: top;">Ascii/  <br>
5417
5418
5419
5420
5421
5422	NAMELIST</td>
5423
5424
5425
5426
5427
5428	<td style="vertical-align: top;">
5429
5430
5431
5432
5433
5434	<p>NAMELIST parameter set, with which the plot layout of the data
5435	in the local file <a href="#PLOT2D_XZ">PLOT2D_XZ</a>
5436	can be steered, if they are visualized with the plot program <a href="http://www.muk.uni-hannover.de/institut/software/iso2d_beschreibung.html">iso2d</a>.
5437	</p>
5438
5439
5440
5441
5442
5443
5444
5445
5446
5447
5448	<p>The description of the local file <a href="#PLOT2D_XY_GLOBAL">PLOT2D_XY_GLOBAL</a>
5449	applies to this file, respectively.</p>
5450
5451
5452
5453
5454
5455	</td>
5456
5457
5458
5459
5460
5461	</tr>
5462
5463
5464
5465
5466
5467	<tr>
5468
5469
5470
5471
5472
5473	<td style="vertical-align: top; text-align: center;">90<br>
5474
5475
5476
5477
5478
5479	</td>
5480
5481
5482
5483
5484
5485	<td style="vertical-align: top;"><a name="PLOT2D_YZ_GLOBAL"></a>PLOT2D_YZ_GLOBAL</td>
5486
5487
5488
5489
5490
5491	<td style="vertical-align: top;">O<br>
5492
5493
5494
5495
5496
5497	</td>
5498
5499
5500
5501
5502
5503	<td style="vertical-align: top;">Ascii/  <br>
5504
5505
5506
5507
5508
5509	NAMELIST</td>
5510
5511
5512
5513
5514
5515	<td style="vertical-align: top;">
5516
5517
5518
5519
5520
5521	<p>NAMELIST parameter set, with which the plot layout of the data
5522	in the local file <a href="#PLOT2D_YZ">PLOT2D_YZ</a>
5523	can be steered, if they are visualized with the plot program <a href="http://www.muk.uni-hannover.de/institut/software/iso2d_beschreibung.html">iso2d</a>.
5524	</p>
5525
5526
5527
5528
5529
5530
5531
5532
5533
5534
5535	<p>The description of the local file <a href="#PLOT2D_XY_GLOBAL">PLOT2D_XY_GLOBAL</a>
5536	applies to this file, respectively.</p>
5537
5538
5539
5540
5541
5542	</td>
5543
5544
5545
5546
5547
5548	</tr>
5549
5550
5551
5552
5553	<tr>
5554
5555
5556
5557
5558	<td style="vertical-align: top; text-align: center;">90</td>
5559
5560
5561
5562
5563	<td style="vertical-align: top;"><a name="TOPOGRAPHY_DATA"></a>TOPOGRAPHY_DATA</td>
5564
5565
5566
5567
5568	<td style="vertical-align: top;">I</td>
5569
5570
5571
5572
5573	<td style="vertical-align: top;">Ascii</td>
5574
5575
5576
5577
5578	<td>Two-dimensional <font color="#000000">topography height information</font> in m.<br>
5579
5580
5581
5582
5583	In case of  <a href="chapter_4.1.html#topography">topography</a> = <span style="font-style: italic;">'read_from_file'</span> the subroutine <span style="font-family: Cumberland AMT;">init_grid</span> reads the topography height information in m for each grid point in
5584	a free floating point format. The data on file are laid out naturally,
5585	i.e. in W-E orientation horizontally and in S-N orientation vertically,
5586	they must thus be organized as follows:<br>
5587
5588
5589
5590
5591	<ul>
5592
5593
5594	<li>each line contains height information in m from <span style="font-style: italic;">i = 0, ..., nx</span>,</li>
5595
5596
5597	<li>the top line contains height information in m for <span style="font-style: italic;">j = ny</span> (North), the bottom line for <span style="font-style: italic;">j = 0</span> (South),</li>
5598
5599
5600	<li>individual data must be separated by at least one blank.</li>
5601
5602
5603
5604
5605	</ul>
5606
5607
5608	Layout sketch:<br>
5609
5610
5611	<span style="font-family: Cumberland AMT;">                        N<br>
5612
5613
5614	(0,ny)   </span><font color="#000000"><span style="font-family: Cumberland AMT;">(1,ny)   </span></font><font color="#000000"><span style="font-family: Cumberland AMT;">(2,ny)   ... </span></font><font color="#000000"><span style="font-family: Cumberland AMT;">(nx,ny)      <span style="font-family: Times New Roman,Times,serif;"></span></span></font><font color="#000000"> top of file</font><font color="#000000"><span style="font-family: Cumberland AMT;"><span style="font-family: Times New Roman,Times,serif;"></span></span></font><br>
5615
5616
5617	<font color="#000000"><font color="#000000"><span style="font-family: Cumberland AMT;">    (0,ny-1) </span><font color="#000000"><span style="font-family: Cumberland AMT;">(1,ny-1) </span></font><font color="#000000"><span style="font-family: Cumberland AMT;">(2,ny-1) ... </span></font><font color="#000000"><span style="font-family: Cumberland AMT;">(nx,ny-1)  <br>
5618
5619
5620	</span></font></font><font color="#000000"><span style="font-family: Cumberland AMT;"></span></font></font><font color="#000000"><font color="#000000"><span style="font-family: Cumberland AMT;">W   (0,ny-2) </span><font color="#000000"><span style="font-family: Cumberland AMT;">(1,ny-2) </span></font><font color="#000000"><span style="font-family: Cumberland AMT;">(2,ny-2) ... </span></font><font color="#000000"><span style="font-family: Cumberland AMT;">(nx,ny-2)   E<br>
5621
5622
5623	</span></font></font></font><font color="#000000"><font color="#000000"><span style="font-family: Cumberland AMT;">                        :<br>
5624
5625
5626	:<br>
5627
5628
5629	</span></font></font><font color="#000000"><font color="#000000"><span style="font-family: Cumberland AMT;">    (0,0)    </span><font color="#000000"><span style="font-family: Cumberland AMT;">(1,0)    </span></font><font color="#000000"><span style="font-family: Cumberland AMT;">(2,0)    ... </span></font><font color="#000000"><span style="font-family: Cumberland AMT;">(nx,0)       </span></font></font></font><font color="#000000"> bottom of file</font><br>
5630
5631
5632	<font color="#000000"><span style="font-family: Cumberland AMT;">                        S</span></font><br>
5633
5634
5635	<font style="font-family: Arial;" color="#000000"></font><span style="font-family: Arial;"></span><br>
5636
5637
5638
5639
5640	These data must exactly match the horizontal grid.<br>
5641
5642
5643	Alternatively, the user may add code to the user interface subroutine <a href="chapter_3.5.1.html#user_init_grid">user_init_grid</a> to allow different data formats.</td>
5644
5645
5646
5647
5648	<td><br>
5649
5650	</td>
5651
5652
5653
5654
5655	</tr>
5656	<tr>
5657
5658	<td style="vertical-align: top; text-align: center;"><font color="#000000">101</font></td>
5659
5660	<td style="vertical-align: top;"><font color="#000000"><a name="DATA_2D_XY_NETCDF"></a>DATA_2D_XY_NETCDF</font></td>
5661
5662	<td style="vertical-align: top;"><font color="#000000">I/O</font></td>
5663
5664	<td style="vertical-align: top;"><font color="#000000">Binary/<br>
5665
5666	NetCDF-<br>
5667
5668	format</font></td>
5669
5670	<td style="vertical-align: top;"><font color="#000000"><font color="#000000">This file contains data of the two-dimensional horizontal
5671	cross sections (see <a href="../app/chapter_4.2.html#data_output">data_output</a>)
5672	in NetCDF format. The data in this file can be visualized by any graphic software which provides a NetCDF interface (e.g. <span style="font-weight: bold;">NCL </span>or<span style="font-weight: bold;"> ferret</span>).<br>
5673
5674	<br>
5675
5676	More detailed informations about the PALM-NetCDF-output are given in <a href="../app/chapter_4.5.1.html">chapter  4.5.1</a>.</font></font></td>
5677
5678	<td style="vertical-align: top;"><br>
5679
5680	</td>
5681
5682	</tr>
5683
5684	<tr>
5685
5686	<td style="vertical-align: top; text-align: center;"><font color="#000000">102</font></td>
5687
5688	<td style="vertical-align: top;"><font color="#000000"><a name="DATA_2D_XZ_NETCDF"></a>DATA_2D_XZ_NETCDF</font></td>
5689
5690	<td style="vertical-align: top;"><font color="#000000">I/O</font></td>
5691
5692	<td style="vertical-align: top;"><font color="#000000"><font color="#000000">Binary/<br>
5693
5694	NetCDF-<br>
5695
5696	format</font></font></td>
5697
5698	<td style="vertical-align: top;"><font color="#000000"><font color="#000000"><font color="#000000">This file contains data of the two-dimensional vertical (xz)
5699	cross sections (see <a href="../app/chapter_4.2.html#data_output">data_output</a>)
5700	in NetCDF format. The data in this file can be visualized by any graphic software which provides a NetCDF interface (e.g. <span style="font-weight: bold;">NCL </span>or<span style="font-weight: bold;"> ferret</span>).<br>
5701
5702	<br>
5703
5704	More detailed informations about the PALM-NetCDF-output are given in <a href="../app/chapter_4.5.1.html">chapter  4.5.1</a>.</font></font></font></td>
5705
5706	<td style="vertical-align: top;"><br>
5707
5708	</td>
5709
5710	</tr>
5711
5712	<tr>
5713
5714	<td style="vertical-align: top; text-align: center;"><font color="#000000">103</font></td>
5715
5716	<td style="vertical-align: top;"><font color="#000000"><a name="DATA_2D_YZ_NETCDF"></a>DATA_2D_YZ_NETCDF</font></td>
5717
5718	<td style="vertical-align: top;"><font color="#000000">I/O</font></td>
5719
5720	<td style="vertical-align: top;"><font color="#000000"><font color="#000000">Binary/<br>
5721
5722	NetCDF-<br>
5723
5724	format</font></font></td>
5725
5726	<td style="vertical-align: top;"><font color="#000000"><font color="#000000"><font color="#000000">This file contains data of the two-dimensional vertical
5727	(yz) cross sections (see <a href="../app/chapter_4.2.html#data_output">data_output</a>)
5728	in NetCDF format. The data in this file can be visualized by any graphic software which provides a NetCDF interface (e.g. <span style="font-weight: bold;">NCL </span>or<span style="font-weight: bold;"> ferret</span>).<br>
5729
5730	<br>
5731
5732	More detailed informations about the PALM-NetCDF-output are given in <a href="../app/chapter_4.5.1.html">chapter  4.5.1</a>.</font></font></font></td>
5733
5734	<td style="vertical-align: top;"><br>
5735
5736	</td>
5737
5738	</tr>
5739
5740	<tr>
5741
5742	<td style="vertical-align: top; text-align: center;"><font color="#000000">104</font></td>
5743
5744	<td style="vertical-align: top;"><font color="#000000"><a name="DATA_1D_PR_NETCDF"></a>DATA_1D_PR_NETCDF</font></td>
5745
5746	<td style="vertical-align: top;"><font color="#000000">I/O</font></td>
5747
5748	<td style="vertical-align: top;"><font color="#000000"><font color="#000000">Binary/<br>
5749
5750	NetCDF-<br>
5751
5752	format</font></font></td>
5753
5754	<td style="vertical-align: top;"><font color="#000000"><font color="#000000"><font color="#000000">This file contains data of the horizontally averaged vertical profiles (see <a href="../app/chapter_4.2.html#data_output_pr">data_output_pr</a>)
5755	in NetCDF format. The data in this file can be visualized by any graphic software which provides a NetCDF interface (e.g. <span style="font-weight: bold;">NCL </span>or<span style="font-weight: bold;"> ferret</span>).<br>
5756
5757	<br>
5758
5759	More detailed informations about the PALM-NetCDF-output are given in <a href="../app/chapter_4.5.1.html">chapter  4.5.1</a>.</font></font></font></td>
5760
5761	<td style="vertical-align: top;"><br>
5762
5763	</td>
5764
5765	</tr>
5766
5767	<tr>
5768
5769	<td style="vertical-align: top; text-align: center;"><font color="#000000">105</font></td>
5770
5771	<td style="vertical-align: top;"><font color="#000000"><a name="DATA_1D_TS_NETCDF"></a>DATA_1D_TS_NETCDF</font></td>
5772
5773	<td style="vertical-align: top;"><font color="#000000">I/O</font></td>
5774
5775	<td style="vertical-align: top;"><font color="#000000"><font color="#000000">Binary/<br>
5776
5777	NetCDF-<br>
5778
5779	format</font></font></td>
5780
5781	<td style="vertical-align: top;"><font color="#000000"><font color="#000000"><font color="#000000">This file contains data of the timeseries (see <a href="chapter_4.2.html#dt_dots">dt_dots</a>)
5782	in NetCDF format. The data in this file can be visualized by any graphic software which provides a NetCDF interface (e.g. <span style="font-weight: bold;">NCL </span>or<span style="font-weight: bold;"> ferret</span>).<br>
5783
5784	<br>
5785
5786	More detailed informations about the PALM-NetCDF-output are given in <a href="../app/chapter_4.5.1.html">chapter  4.5.1</a>.</font></font></font></td>
5787
5788	<td style="vertical-align: top;"><br>
5789
5790	</td>
5791
5792	</tr>
5793
5794	<tr>
5795
5796	<td style="vertical-align: top; text-align: center;"><font color="#000000">106</font></td>
5797
5798	<td style="vertical-align: top;"><font color="#000000"><a name="DATA_3D_NETCDF"></a>DATA_3D_NETCDF</font></td>
5799
5800	<td style="vertical-align: top;"><font color="#000000">I/O</font></td>
5801
5802	<td style="vertical-align: top;"><font color="#000000"><font color="#000000">Binary/<br>
5803
5804	NetCDF-<br>
5805
5806	format</font></font></td>
5807
5808	<td style="vertical-align: top;"><font color="#000000"><font color="#000000"><font color="#000000">This file contains data of the 3d-volume data (see <a href="../app/chapter_4.2.html#data_output">data_output</a>)
5809	in NetCDF format. The data in this file can be visualized by any graphic software which provides a NetCDF interface (e.g. <span style="font-weight: bold;">NCL </span>or<span style="font-weight: bold;"> ferret</span>).<br>
5810
5811	<br>
5812
5813	More detailed informations about the PALM-NetCDF-output are given in <a href="../app/chapter_4.5.1.html">chapter  4.5.1</a>.</font></font></font></td>
5814
5815	<td style="vertical-align: top;"><br>
5816
5817	</td>
5818
5819	</tr>
5820
5821	<tr>
5822
5823	<td style="vertical-align: top; text-align: center;"><font color="#000000">107</font></td>
5824
5825	<td style="vertical-align: top;"><font color="#000000"><a name="DATA_1D_SP_NETCDF"></a>DATA_1D_SP_NETCDF</font></td>
5826
5827	<td style="vertical-align: top;"><font color="#000000">I/O</font></td>
5828
5829	<td style="vertical-align: top;"><font color="#000000"><font color="#000000">Binary/<br>
5830
5831	NetCDF-<br>
5832
5833	format</font></font></td>
5834
5835	<td style="vertical-align: top;"><font color="#000000"><font color="#000000"><font color="#000000">This file contains data of the horizontal spectra (see <a href="../app/chapter_4.2.html#data_output_sp">data_output_sp</a>)
5836	in NetCDF format. The data in this file can be visualized by any graphic software which provides a NetCDF interface (e.g. <span style="font-weight: bold;">NCL </span>or<span style="font-weight: bold;"> ferret</span>).<br>
5837
5838	<br>
5839
5840	More detailed informations about the PALM-NetCDF-output are given in <a href="../app/chapter_4.5.1.html">chapter  4.5.1</a>.</font></font></font></td>
5841
5842	<td style="vertical-align: top;"><br>
5843
5844	</td>
5845
5846	</tr>
5847
5848	<tr>
5849
5850	<td style="vertical-align: top; text-align: center;"><font color="#000000">108</font></td>
5851
5852	<td style="vertical-align: top;"><font color="#000000"><a name="DATA_PRT_NETCDF"></a>DATA_PRT_NETCDF/</font></td>
5853
5854	<td style="vertical-align: top;"><font color="#000000">I/O</font></td>
5855
5856	<td style="vertical-align: top;"><font color="#000000"><font color="#000000">Binary/<br>
5857
5858	NetCDF-<br>
5859
5860	format</font></font></td>
5861
5862	<td style="vertical-align: top;"><font color="#000000"><font color="#000000"><font color="#000000">This file contains particle data (see <a href="../app/chapter_4.2.html#dt_prel">dt_prel</a>)
5863	in NetCDF format. The data in this file can be visualized by any graphic software which provides a NetCDF interface (e.g. <span style="font-weight: bold;">NCL </span>or<span style="font-weight: bold;"> ferret</span>).<br>
5864
5865	<br>
5866
5867	More detailed informations about the PALM-NetCDF-output are given in <a href="../app/chapter_4.5.1.html">chapter  4.5.1</a>.</font></font></font></td>
5868
5869	<td style="vertical-align: top;"><br>
5870
5871	</td>
5872
5873	</tr>
5874	<tr>
5875	<td style="vertical-align: top; text-align: center;">109</td>
5876	<td align="left" valign="top"><a name="DATA_1D_PTS_NETCDF"></a>DATA_1D_PTS_NETCDF</td>
5877	<td align="left" valign="top">I/O</td>
5878	<td align="left" valign="top">Binary/<br>
5879	NetCDF-<br>
5880	format</td>
5881	<td align="left" valign="top">This file contains data of the timeseries of particle quantities (<font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000">see <a href="chapter_4.2.html#dt_prel">dt_prel</a>)
5882	in NetCDF format. </font></font></font></font><font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000">The data in this file can be visualized by any graphic software which provides a NetCDF interface (e.g. <span style="font-weight: bold;">NCL </span>or<span style="font-weight: bold;"> ferret</span>). For a list of available output quantities see </font></font></font></font><font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000"> <a href="chapter_4.2.html#dt_dopts">dt_dopts</a>.</font></font></font></font></font><br>
5883	<font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000"><br>
5884	</font></font></font></font><span lang="en-GB"><font face="Thorndale">In case of using more than one particle group (see <a href="chapter_4.2.html#number_of_particle_groups">number_of_particle_groups</a>),
5885	seperate time series are output for each of the groups. The long names
5886	of the variables in the NetCDF file containing the respective
5887	timeseries all end with the string</font><span style="font-style: italic; font-family: monospace;">' PG ##'</span><font face="Thorndale">, where ## is the number of the particle group (<span style="font-style: italic;">01</span>, <span style="font-style: italic;">02</span>, etc.). <br>
5888	<br>
5889	</font></span><font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000">More detailed informations about the PALM-NetCDF-output are given in <a href="chapter_4.5.1.html">chapter  4.5.1</a>.</font></font></font></font></td>
5890	<td align="left" valign="top"></td>
5891	</tr>
5892	<tr>
5893	<td style="text-align: center; vertical-align: top;">111</td>
5894	<td style="vertical-align: top;"><a name="DATA_2D_XY_AV_NETCDF"></a>DATA_2D_XY_AV_NETCDF</td>
5895	<td style="vertical-align: top;">I/O</td>
5896	<td style="vertical-align: top;"><font color="#000000"><font color="#000000"><font color="#000000">Binary/<br>
5897
5898	NetCDF-<br>
5899
5900	format</font></font></font></td>
5901	<td style="vertical-align: top;"><font color="#000000"><font color="#000000"><font color="#000000">This file contains data of the temporally averaged two-dimensional horizontal
5902	cross sections (see <a href="chapter_4.2.html#data_output">data_output</a>)
5903	in NetCDF format. The data in this file can be visualized by any graphic software which provides a NetCDF interface (e.g. <span style="font-weight: bold;">NCL </span>or<span style="font-weight: bold;"> ferret</span>).<br>
5904
5905	<br>
5906
5907	More detailed informations about the PALM-NetCDF-output are given in <a href="chapter_4.5.1.html">chapter  4.5.1</a>.</font></font></font></td>
5908	<td></td>
5909	</tr>
5910	<tr>
5911	<td style="text-align: center; vertical-align: top;">112</td>
5912	<td style="vertical-align: top;"><a name="DATA_2D_XZ_AV_NETCDF"></a>DATA_2D_XZ_AV_NETCDF</td>
5913	<td style="vertical-align: top;">I/O</td>
5914	<td style="vertical-align: top;"><font color="#000000"><font color="#000000"><font color="#000000">Binary/<br>
5915
5916	NetCDF-<br>
5917
5918	format</font></font></font></td>
5919	<td style="vertical-align: top;"><font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000">This file contains data of the temporally averaged two-dimensional vertical (xz)
5920	cross sections (see <a href="chapter_4.2.html#data_output">data_output</a>)
5921	in NetCDF format. The data in this file can be visualized by any graphic software which provides a NetCDF interface (e.g. <span style="font-weight: bold;">NCL </span>or<span style="font-weight: bold;"> ferret</span>).<br>
5922
5923	<br>
5924
5925	More detailed informations about the PALM-NetCDF-output are given in <a href="chapter_4.5.1.html">chapter  4.5.1</a>.</font></font></font></font></td>
5926	<td></td>
5927	</tr>
5928	<tr>
5929	<td style="text-align: center; vertical-align: top;">113</td>
5930	<td style="vertical-align: top;"><font color="#000000"><a name="DATA_2D_YZ_AV_NETCDF"></a>DATA_2D_YZ_AV_NETCDF</font></td>
5931	<td style="vertical-align: top;">I/O</td>
5932	<td style="vertical-align: top;"><font color="#000000"><font color="#000000"><font color="#000000">Binary/<br>
5933
5934	NetCDF-<br>
5935
5936	format</font></font></font></td>
5937	<td style="vertical-align: top;"><font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000">This file contains data of the temporally averaged two-dimensional vertical
5938	(yz) cross sections (see <a href="chapter_4.2.html#data_output">data_output</a>)
5939	in NetCDF format. The data in this file can be visualized by any graphic software which provides a NetCDF interface (e.g. <span style="font-weight: bold;">NCL </span>or<span style="font-weight: bold;"> ferret</span>).<br>
5940
5941	<br>
5942
5943	More detailed informations about the PALM-NetCDF-output are given in <a href="chapter_4.5.1.html">chapter  4.5.1</a>.</font></font></font></font></td>
5944	<td></td>
5945	</tr>
5946	<tr>
5947	<td style="text-align: center; vertical-align: top;">116</td>
5948	<td style="vertical-align: top;"><font color="#000000"><a name="DATA_3D_AV_NETCDF"></a>DATA_3D_AV_NETCDF</font></td>
5949	<td style="vertical-align: top;">I/O</td>
5950	<td style="vertical-align: top;"><font color="#000000"><font color="#000000"><font color="#000000">Binary/<br>
5951
5952	NetCDF-<br>
5953
5954	format</font></font></font></td>
5955	<td style="vertical-align: top;"><font color="#000000"><font color="#000000"><font color="#000000"><font color="#000000">This file contains data of the temporally averaged 3d-volume data (see <a href="chapter_4.2.html#data_output">data_output</a>)
5956	in NetCDF format. The data in this file can be visualized by any graphic software which provides a NetCDF interface (e.g. <span style="font-weight: bold;">NCL </span>or<span style="font-weight: bold;"> ferret</span>).<br>
5957
5958	<br>
5959
5960	More detailed informations about the PALM-NetCDF-output are given in <a href="chapter_4.5.1.html">chapter  4.5.1</a>.</font></font></font></font></td>
5961	<td></td>
5962	</tr>
5963
5964
5965
5966
5967
5968
5969
5970
5971
5972
5973
5974	</tbody>
5975	</table>
5976
5977
5978
5979
5980
5981	<font color="#000000"><br>
5982
5983
5984
5985
5986
5987	</font>
5988	<br>
5989
5990
5991
5992
5993
5994	<font color="#000080"><font color="#000080"><a href="chapter_3.3.html"><font color="#000080"><img src="left.gif" name="Grafik1" align="bottom" border="2" height="32" width="32"></font></a><a href="index.html"><font color="#000080"><img src="up.gif" name="Grafik2" align="bottom" border="2" height="32" width="32"></font></a><a href="chapter_3.5.html"><font color="#000080"><img src="right.gif" name="Grafik3" align="bottom" border="2" height="32" width="32"></font></a></font></font><br>
5995
5996
5997
5998
5999
6000
6001	<br>
6002
6003
6004
6005
6006
6007
6008	<span style="font-style: italic;">Last change:</span> 07/11/06 (ML)<br>
6009
6010
6011
6012
6013
6014	</font><br>
6015
6016
6017
6018
6019
6020	</body></html>

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |