| Version 6 (modified by dom_dwd_user, 5 years ago) (diff) |
|---|
HTCM example setup
This page is part of the Human Thermal Comfort Module (HTCM) documentation. It contains a documentation about a test setup for human thermal comfort.
For an overview of all HTCM-related pages, see the HTCM main page.
HTCM can easily be tested by making small modifications to the generic "test_urban" setup. The modifications required are indicated below.
HTCM can be enabled by adding the indicated lines to the test_urban_p3d file located in the INPUT folder.
!------------------------------------------------------------------------------- !-- INITIALIZATION PARAMETER NAMELIST ! Documentation: https://palm.muk.uni-hannover.de/trac/wiki/doc/app/inipar !------------------------------------------------------------------------------- &initialization_parameters ! !-- Grid !------------------------------------------------------------------------------ nx = 19, ny = 19, nz = 60, dx = 2.0, dy = 2.0, dz = 2.0, ! !-- Numerics !------------------------------------------------------------------------------ fft_method = 'fftw', ! !-- Mode !------------------------------------------------------------------------------ humidity = .T., ! !-- Initialization !------------------------------------------------------------------------------ initializing_actions = 'set_constant_profiles', !'inifor', pt_surface = 293.15, ug_surface = 1.0, vg_surface = 0.0, day_of_year_init = 202, time_utc_init = 43200.0, ! !-- Wall/soil spinup !------------------------------------------------------------------------------ spinup_time = 86400.0, spinup_pt_mean = 293.15, spinup_pt_amplitude = 15.0, dt_spinup = 120.0, data_output_during_spinup = .T., ! !-- Topography !------------------------------------------------------------------------------ topography = 'read_from_file', ! !-- Physics !------------------------------------------------------------------------------ longitude = 13.4, latitude = 52.5, / ! end of inipar namelist !------------------------------------------------------------------------------- !-- RUNTIME PARAMETER NAMELIST ! Documentation: https://palm.muk.uni-hannover.de/trac/wiki/doc/app/d3par !------------------------------------------------------------------------------- &runtime_parameters ! !-- Run steering !------------------------------------------------------------------------------ end_time = 86400.0, create_disturbances = .T., ! !-- Run-control/timeseries output settings !------------------------------------------------------------------------------ dt_run_control = 60.0, dt_dots = 60.0, ! !-- Profile output settings !------------------------------------------------------------------------------ skip_time_dopr = 0.0, dt_dopr = 3600.0, averaging_interval_pr = 3600.0, dt_averaging_input_pr = 0.0, data_output_pr = '#u', 'u*2', 'wu', 'w*u*', 'w"u"', '#v', 'v*2', 'wv', 'w*v*', 'w"v"', 'w', 'w*2', '#pt', 'pt*2', 'wpt', 'w*pt*', 'w"pt"', 'e', 'e*', '#km', '#l', '#t_soil', '#m_soil', ! !-- 2D/3D output settings !------------------------------------------------------------------------------ do3d_at_begin = .T., do2d_at_begin = .T., dt_data_output = 3600.0, averaging_interval = 3600.0, dt_averaging_input = 0.0, section_xy = 0, data_output = 'u', 'u_av', 'v', 'v_av', 'w', 'w_av', 'pt', 'pt_av', 'e', 'e_av', 'p', 'p_av', 'm_soil', 'm_soil_av', 't_soil', 't_soil_av', 'shf*_xy', 'shf*_xy_av', 'ghf*_xy', 'ghf*_xy_av', 'u*_xy', 'z0*_xy', 't*_xy', 'm_liq*_xy', 'r_s*_xy', 'r_a*_xy', 'rad_net*_xy', 'qsws*_xy', 'qsws*_xy_av', 'tsurf*_xy', 'tsurf*_xy_av', 'pcm_lad', 'pcm_heatrate', 'kc_PM10', 'kc_PM25', 'usm_t_surf_roof', 'usm_t_wall_roof', 'usm_t_wall_north', 'usm_t_wall_east', 'usm_t_wall_south', 'usm_t_wall_west', 'usm_t_green_roof', 'usm_t_green_north', 'usm_t_green_east', 'usm_t_green_south', 'usm_t_green_west', 'usm_t_window_roof', 'usm_t_window_north', 'usm_t_window_east', 'usm_t_window_south', 'usm_t_window_west', !-- HTCM 'bio_perct*_xy', ! Perceived Temperature based on instantaneous input conditions 'bio_pet*_xy', ! Physiologically Equivalent Temperature, instantaneous 'bio_utci*_xy', ! Universal Thermal Climate Index, instantaneous 'bio_perct*_xy_av', ! Perceived Temperature based on time-averaged input parameters 'bio_pet*_xy_av', ! PET with time-averaged input 'bio_utci*_xy_av', ! UTCI with time-averaged input 'bio_mrt', ! The mean radiant temperature used as input for the thermal comfort calculations (3D) 'bio_mrt_av', ! Mean radiant temperature, time-averaged, 3D 'bio_mrt_xy', ! Mean radiant temperature, instantaneous, 2D 'bio_mrt_xy_av', ! Mean radiant temperature, time-averaged, 2D / ! end of d3par namelist !------------------------------------------------------------------------------- !-- RADIATION MODEL PARAMETER NAMELIST ! Documentation: https://palm.muk.uni-hannover.de/trac/wiki/doc/app/radpar !------------------------------------------------------------------------------- &radiation_parameters radiation_scheme = 'clear-sky', albedo_type = 5, constant_albedo = .F., dt_radiation = 60.0, split_diffusion_radiation = .T., surface_reflections = .T., nrefsteps = 2, mrt_factors = .F., / !------------------------------------------------------------------------------- !-- LAND SURFACE MODEL PARAMETER NAMELIST ! Documentation: https://palm.muk.uni-hannover.de/trac/wiki/doc/app/lsmpar !------------------------------------------------------------------------------- &land_surface_parameters constant_roughness = .T., aero_resist_kray = .T., vegetation_type = 2, soil_type = 3, conserve_water_content = .T., root_fraction = 0.49, 0.26, 0.25, 0.0, 0.0, 0.0, 0.0, 0.0, soil_temperature = 293.5, 293.6, 293.1 293.1, 293.1, 293.1 293.1, 293.1, deep_soil_temperature = 293.1, / ! end of lsm_par namelist !------------------------------------------------------------------------------- !-- URBAN SURFACE MODEL PARAMETER NAMELIST ! Documentation: https://palm.muk.uni-hannover.de/trac/wiki/doc/app/usmpar !------------------------------------------------------------------------------- &urban_surface_parameters usm_material_model = .T., / ! end of urban_surface_par namelist !------------------------------------------------------------------------------- !-- PLANT CANOPY MODEL PARAMETER NAMELIST ! Documentation: https://palm.muk.uni-hannover.de/trac/wiki/doc/app/canpar !------------------------------------------------------------------------------- &plant_canopy_parameters canopy_mode = 'read_from_file_3d', canopy_drag_coeff = 0.3, / ! end of canopy_par namelist !------------------------------------------------------------------------------- !-- CHEMISTRY MODEL PARAMETER NAMELIST ! Documentation: https://palm.muk.uni-hannover.de/trac/wiki/doc/app/chempar !------------------------------------------------------------------------------- &chemistry_parameters chem_gasphase_on = .F., surface_csflux_name = 'PM10','PM25', surface_csflux = 0.75, 0.375, cs_name = 'PM10','PM25', cs_surface = 2.0, 1.0, bc_cs_b = 'neumann', bc_cs_t = 'neumann', emiss_factor_main = 1.667, emiss_factor_side = 0.334, main_street_id = 12, side_street_id = 8, max_street_id = 19, / ! end of chemistry_par namelist !------------------------------------------------------------------------------- !-- BIOMETEOROLOGY MODULE PARAMETER NAMELIST ! Documentation: https://palm.muk.uni-hannover.de/trac/wiki/doc/app/biomet !------------------------------------------------------------------------------- &biometeorology_parameters thermal_comfort = .T., ! This parameter is optional: It will automatically be set if omitted but thermal comfort output specified in data_output. / ! end of biometeorology_parameters namelist !-------------------------------------------------------------------------------
