Changes between Version 779 and Version 780 of doc/app/errmsg
- Timestamp:
- Dec 6, 2021 3:53:05 PM (3 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
doc/app/errmsg
v779 v780 29 29 ||[=#PA0004 PA0004] ||mismatch between atmosphere and ocean model: dt_coupling (atmosphere) = "..." dt_coupling (ocean) = "..." ocean value is set to atmosphere value || For coupled runs the temporal interval for the data exchange [../runtime_parameters#dt_coupling dt_coupling] must be explicitly set and must have the same value in both models ([../runtime_parameters#dt_coupling dt_coupling] has to be set in [../iofiles#PARIN PARIN] and [../iofiles#PARIN_O PARIN_O]). See also [../examples/coupled coupled runs]. || 30 30 ||[=#PA0005 PA0005] ||dt_coupling <= 0.0 is not allowed || This error occurs if an invalid value for [../runtime_parameters#dt_coupling dt_coupling] is used in the parameter file. [../runtime_parameters#dt_coupling dt_coupling] must be > 0.0 and equal in both models ([../runtime_parameters#dt_coupling dt_coupling] has to be set in [../iofiles#PARIN PARIN] and [../iofiles#PARIN_O PARIN_O]). || 31 ||[=#PA0006 PA0006] || unused ||||31 ||[=#PA0006 PA0006] ||time averaging of a static quantity ("...") is not provided ||Remove this quantity from the list of output quantities in runtime parameter [../runtime_parameters#data_output data_output], or just remove the {{{_av}}} from the respective string. Time averaging of static quantities is not provided, because these quantities do not change in time. || 32 32 ||[=#PA0007 PA0007] ||unused || || 33 33 ||[=#PA0008 PA0008] ||mismatch between atmosphere and ocean model: time from reference point (atmosphere) = "..." time_from reference point (ocean) = "..." || The simulated time from the reference point is stored internally in the variable {{{time_to_be_simulated_from_reference_point}}}. In coupled mode both times must be equal. This error might occur when precursor runs are used with different startup times and the coupling is initiated inappropiately. See [../examples/coupled coupled runs] for a detailed description of the setup for precursor runs. || … … 770 770 ||[=#PA0552 PA0552] || Reading 3D building data - too much data points along the vertical coordinate || || 771 771 ||[=#PA0553 PA0553] || Reading 3D building data - vertical coordinate do not match numeric grid || The z-dimension in the static input file needs to match with the vertical numerical grid of the scalar grid points (center of the grid volume). The vertical grid for 3D buildings starts at the surface, i.e. at z=0. || 772 ||[=#PA0554 PA0554] || Minimum requirement for surface classification is not fulfilled. At least vegetation_type, pavement_type, soil_type and water_type are required. If urban-surface model is applied, also building_type ist required || ||772 ||[=#PA0554 PA0554] || Minimum requirement for surface classification is not fulfilled. At least vegetation_type, pavement_type, soil_type and water_type are required. If urban-surface model is applied, also building_type ist required || || 773 773 ||[=#PA0555 PA0555] || If vegetation_type = 0 at any location, vegetation_pars is required || || 774 774 ||[=#PA0556 PA0556] || If vegetation_type = 0 at any location, root_area_dens_s is required || || … … 811 811 ||[=#PA0596 PA0596] || unknown boundary condition: [wiki:doc/app/salsa_parameters#bc_aer_t bc_aer_t] = "..." || See parameter [wiki:doc/app/salsa_parameters#bc_aer_t bc_aer_t] for allowed values, and appropriately correct your parameter file. || 812 812 ||[=#PA0597 PA0597] || unknown nj3 (must be 1-3) || See parameter [wiki:doc/app/salsa_parameters#nj3 nj3] for allowed values, and appropriately correct your parameter file. || 813 ||[=#PA0598 PA0598] || [wiki:doc/app/salsa_parameters#salsa_emission_mode salsa_emission_mode] /= "no_emission" for requires [wiki:doc/app/salsa_parameters#bc_aer_b bc_aer_b] = "Neumann" || If aerosol surface emissions are given, a Neumann boundary condition should be set at the bottom. See parameter [wiki:doc/app/salsa_parameters#bc_aer_b bc_aer_b] for allowed values, and appropriately correct your parameter file. ||813 ||[=#PA0598 PA0598] || [wiki:doc/app/salsa_parameters#salsa_emission_mode salsa_emission_mode] /= "no_emission" for requires [wiki:doc/app/salsa_parameters#bc_aer_b bc_aer_b] = "Neumann" || If aerosol surface emissions are given, a Neumann boundary condition should be set at the bottom. See parameter [wiki:doc/app/salsa_parameters#bc_aer_b bc_aer_b] for allowed values, and appropriately correct your parameter file. || 814 814 ||[=#PA0599 PA0599] || SALSA is run together with chemistry but not all gaseous components are provided by kpp (H2SO4, HNO3, NH3, OCNV, OCSC). || Some gaseous compound(s) needed in the aerosol module SALSA are missing from the chemical mechanism applied. Check the {{{chem_gashase_mod.f90}}}. || 815 815 ||[=#PA0600 PA0600] || Unknown aerosol species/component(s) given in the initialization || Unknown chemical components included in the parameter file. See parameter [wiki:doc/app/salsa_parameters#listspec listspec] for allowed components. || … … 817 817 ||[=#PA0602 PA0602] || None of the aerosol chemical components in PIDS_DYNAMIC... correspond to ones applied in SALSA. || If the initial aerosol concentrations are read from the dynamic input file (parameter [wiki:doc/app/salsa_parameters#isdtyp isdtyp] = 1), the chemical composition must include at least one chemical component applied in the model. || 818 818 ||[=#PA0603 PA0603] || Currently only lod=1 accepted for init_atmosphere_aerosol || Initialization of the aerosol module via dynamic input file is only allowed with profiles (LOD=1). || 819 ||[=#PA0604 PA0604] || The number of size bins in init_atmosphere_aerosol does not match with that applied in the model set-up || The number of aerosol size bins in the dynamic input file does not correspond to the size distribution information given in the parameter file. See parameters [wiki:doc/app/salsa_parameters#nbin nbin] and [wiki:doc/app/salsa_parameters#reglim reglim], and appropriately correct the discrepancy. ||819 ||[=#PA0604 PA0604] || The number of size bins in init_atmosphere_aerosol does not match with that applied in the model set-up. || The number of aerosol size bins in the dynamic input file does not correspond to the size distribution information given in the parameter file. See parameters [wiki:doc/app/salsa_parameters#nbin nbin] and [wiki:doc/app/salsa_parameters#reglim reglim], and appropriately correct the discrepancy. || 820 820 ||[=#PA0605 PA0605] || Mean diameters of the aerosol size bins in PIDS_DYNAMIC... do not match with the sectional representation of the model. || The mean diameters of the aerosol size bins in the dynamic input file does not correspond to the size distribution information given in the parameter file. See parameters [wik:doc/app/salsa_parameters#nbin nbin] and [wiki:doc/app/salsa_parameters#reglim reglim], and appropriately correct the discrepancy. || 821 821 ||[=#PA0606 PA0606] || Error in initialising mass fractions of chemical components. Check that all chemical components are included in parameter file! || The chemical composition in the dynamic input file does not overlap with the one applied in the model. See parameter [wiki:doc/app/salsa_parameters#listspec listspec] for allowed components. || … … 848 848 ||[=#PA0633 PA0633] || emission_time_factors should be given for each nhoursyear OR nmonthdayhour || Emission time factors for aerosol emissions (LOD=1) are not given or they are not correctly named in {{{<run_identifier>_salsa}}}. || 849 849 ||[=#PA0634 PA0634] || unknown unit for aerosol emissions: ... || Aerosol emission values given in the NetCDF input file {{{<run_identifier>_salsa}}} are incorrect when lod=2 is applied. \\\\ Aerosol emissions are given as number emission per aersol size bin and should be given in units: \\ #/m^2^/s. || 850 ||[=#PA0635 PA0635] || The number of size bins in aerosol input data does not match with that applied in the model set-up || The number of aerosol size bins in {{{<run_identifier>_salsa}}} does not correspond to the size distribution information given in the parameter file. See parameters [wiki:doc/app/salsa_parameters#nbin nbin] and [wiki:doc/app/salsa_parameters#reglim reglim], and appropriately correct the discrepancy. ||850 ||[=#PA0635 PA0635] || The number of size bins in aerosol input data does not match with that applied in the model set-up. || The number of aerosol size bins in {{{<run_identifier>_salsa}}} does not correspond to the size distribution information given in the parameter file. See parameters [wiki:doc/app/salsa_parameters#nbin nbin] and [wiki:doc/app/salsa_parameters#reglim reglim], and appropriately correct the discrepancy. || 851 851 ||[=#PA0636 PA0636] || Mean diameters of the aerosol size bins in PIDS_SALSA... do not mmatch with the ones in the model. || The mean diameters of the aerosol size bins in {{{<run_identifier>_salsa}}} does not correspond to the size distribution information given in the parameter file. See parameters [wiki:doc/app/salsa_parameters#nbin nbin] and [wiki:doc/app/salsa_parameters#reglim reglim], and appropriately correct the discrepancy. || 852 852 ||[=#PA0637 PA0637] || Unknown lod for aerosol_emission_values. || The level of detail (LOD) for aerosol_emission_values in {{{<run_identifier>_salsa}}} should be either 1 or 2. ||
