Changes between Version 681 and Version 682 of doc/app/errmsg

Timestamp:

Mar 3, 2020 10:31:15 AM (5 years ago)

Author:

raasch

Comment:

--

doc/app/errmsg

@@ -326 +326 @@
 ||[=#PA0283 PA0283]   ||no sufficient convergence within 1000 cycles   || Still after 1000 cycles of the multigrid-solver the divergence residual is larger than the residual limit given by [../initialization_parameters#residual_limit residual_limit]. Try to increase the residual limit, or fix the number of multigrid cycles (see [../initialization_parameters#mg_cycles mg_cycles]). In any case, carefully check if the divergence of the velocity field is sufficiently reduced by the multigrid solver. This can be done by comparing the divergence before and after the call of the multigrid solver which is printed in the RUN_CONTROL file. \\\\ If this error appears during the initial phase of a run (before the first timestep), the number of subdomain gridpoints along x/y/z probably do not allow sufficient coarsening of the grid. The number of gridpoints should allow for a division by two (without rest) at least 2-3 times. ||
 ||[=#PA0284 PA0284]   ||data from subdomain of previous run mapped more than 1000 times   || The model domain of the precursor run was much smaller than that of the main run. It was reused more than 1000 times in one direction. Try a smaller main run domain or a larger precursor. ||
-||[=#PA0285 PA0285]   ||number of PEs or virtual PE-grid changed in restart run PE ... will read from files ...   || Either the model domain of the precursor run is smaller than that of the main run and has been copied one or multiple times or the number of processors has been changed during restart runs. This informative message is only printed out for PE0 but is also valid for the other processors.  ||
+||[=#PA0285 PA0285]   ||number of PEs or virtual PE-grid changed in restart run. Set debug_output =.T. to get a list of files from which the single PEs will read respectively || Either the model domain of the precursor run is smaller than that of the main run and has been copied one or multiple times or the number of processors has been changed during restart runs. This informative message is only printed out for PE0 but is also valid for the other processors. Set runtime parameter debug_output = .T. to see from which files the respective PEs will read. ||
 ||[=#PA0286 PA0286]   ||version mismatch concerning binary_version_local: version on file = "..." version in program = "..."   || The precursor run was carried out with a different version than the main run. Repeat the precurser with the current version or carry out the main run with the same version as the precursor. ||
 ||[=#PA0287 PA0287]   ||problem with index bound nxl on restart file "..." nxl = ... but it should be = ... from the index bound information array   ||The processor grid was changed between this and the previous run. See documentation of [../examples/turbinf tubulent inflow] for detailed information on the use of restart data for precursor runs.  ||