Changes between Version 649 and Version 650 of doc/app/errmsg

Timestamp:

Aug 27, 2019 3:48:35 PM (6 years ago)

Author:

suehring

Comment:

--

doc/app/errmsg

@@ -846 +846 @@
 ||[=#PA0644 PA0644]  || unknown unit for gaseous emissions: ... || Unknown units applied for the gaseous emissions in the NetCDF input file {{{<run_identifier>_chemistry}}}. \\\\ Units should be:\\ #/m2/s or g/m2/s or ppm/m2/s or mumol/m2/s or kg/m2/yr or g/m2/yr\\\\ Note that gases are not imported to SALSA from the chemistry module since the chemistry module is not applied! ||
 ||[=#PA0645 PA0645]   || surface element at grid point (j,i) = ( ... ) is not a water surface, so that information given in water_pars is neglected. || ||
-||[=#PA0646 PA0646]  || output of "..." requires salsa = .TRUE.   ||Output of the aerosol mass concentrations is only available when the aerosol module SALSA has been activated by giving the {{{&salsa_parameters}}} namelist.||
+||[=#PA0646 PA0646]  || ''rad_sw_in'' / ''rad_lw_in'' / ''rad_sw_in_dif'' has no valid ''lod'' attribute  || ||
 ||[=#PA0647 PA0647]   || surface element at grid point (j,i) = ( ... ) is not a pavement surface, so that information given in pavement_pars is neglected. || ||
 ||[=#PA0648 PA0648]  || No grid coarsening possible, multigrid approach effectively reduces to a Gauss-Seidel scheme. || The convergence of the pressure solver might be insufficient and the simulation can become unstable. This case, it is worthwhile to increase the number of Gauss-Seidel iterations ([../inipar#ngsrb ngsrb]). ||
@@ -870 +870 @@
 ||[=#PA0668 PA0668]  || The potential temperature does not lie between 220 K and 330 K. || pt exceed a specified limit (vdi_internal_controls). ||
 ||[=#PA0669 PA0669]  || 2-delta t waves are generated || The u component at a control grid point or the means of the meteorological variables exhibit 2 delta t waves (vdi_internal_controls). ||
+||[=#PA0670 PA0670]  || External radiation with ''lod'' = 2 is currently not possible with average_radiation = .T.. || ||
 ||[=#PA0671 PA0671]  || For non-pavement surfaces the combination of lai = 0.0 and c_veg = 1.0 is not allowed. || ||
 ||[=#PA0672 PA0672]  || Usage of dynamic input file requires canopy_mode = read_from_file_3d || ||
+||[=#PA0673 PA0673]  || External radiation input should have the same ''lod''. || ||
 ||[=#UI0001 UI0001]   ||unknown location "..."   ||The location of the CALL of user_actions has to be one of 'before_timestep', 'after_integration', 'after_timestep', 'u_tendency' 'v_tendency', 'w_tendency', 'pt_tendency', 'sa_tendency', 'e_tendency', 'q_tendency', 's_tendency'. The location of the CALL of user_actions_ij has to be one of 'u_tendency' 'v_tendency', 'w_tendency', 'pt_tendency', 'sa_tendency', 'e_tendency', 'q_tendency', 's_tendency'.   ||
 ||[=#UI0002 UI0002]   ||location "..." is not allowed to be called with parameters "i" and "j"   || The location of the CALL of user_actions_ij must not be 'before_timestep', 'after_integration', 'after_timestep' ||