Changes between Version 646 and Version 647 of doc/app/errmsg

Timestamp:

Aug 26, 2019 2:10:19 PM (6 years ago)

Author:

suehring

Comment:

--

doc/app/errmsg

@@ -357 +357 @@
 ||[=#PA0313 PA0313]   ||External radiation forcing: first point in time is /= 0.0. || ||
 ||[=#PA0314 PA0314]   ||External radiation forcing does not cover the entire simulation time. || ||
-||[=#PA0315 PA0315]   ||unused   || ||
-||[=#PA0316 PA0316]   ||unused   || ||
+||[=#PA0315 PA0315]   ||In case of external radiation forcing a dynamic input file is required. If no dynamic input for the child domain(s) is provided, at least one for the root domain is needed. || ||
+||[=#PA0316 PA0316]   || pavement-surfaces are not allowed in combination with a non-default setting of dz_soil || ||
 ||[=#PA0317 PA0317]   ||ocean mode does not allow coupling_char = ... set by palmrun-option "-y"   || The palmrun option "-y" must not be used for atmosphere runs. The option is only required for ocean precursor runs, which are followed by [../examples/coupled atmosphere-ocean coupled] restart runs. ||
 ||[=#PA0318 PA0318]   ||inflow_damping_height must be explicitly specified because the inversion height calculated by the prerun is zero   ||See [../inipar#inflow_damping_height inflow_damping_height].  ||
@@ -658 +658 @@
 ||[=#PA0434 PA0434]   || Flight leg or parts of it are outside the model domain || End position must be within the model domain in case of return-legs. ||
 ||[=#PA0435 PA0435]   || Unknown flight mode ||  [../flpar/#leg_mode leg_mode] can either be 'cyclic' or 'return'. ||
+||[=#PA0436 PA0436]   || surface element at grid point (j,i) = ( ... ) is not a vegetation surface, so that information given in vegetation_pars is neglected. || ||
 ||[=#PA0438 PA0438]   || Flight level is outside the model domain || Flight level is above domain top or below 0. ||
 ||[=#PA0439 PA0439]   || netcdf_data_format must be > 2 || Data output for virtual flights has 4 unlimited dimensions - time, x-, y-, and z-position. Unfortunately, assignment of more than one unlimited dimension per NC file is only possible with NetCDF4 / HDF5. Adjust [../d3par#netcdf_data_format netcdf_data_format] appropriately ||
@@ -843 +844 @@
 ||[=#PA0643 PA0643]  || salsa_emission_mode = "read_from_file", but preprocessor directive __netcdf is not used in compiling! || You have set [/wiki/doc/app/salsa#salsa_emission_mode salsa_emission_mode] = "read_from_file", but netcdf-code has not been activated by the corresponding cpp-preprocessor switch. Add {{{'-D__netcdf'}}} to the %cpp_options line in the configuration file and re-compile. ||
 ||[=#PA0644 PA0644]  || unknown unit for gaseous emissions: ... || Unknown units applied for the gaseous emissions in the NetCDF input file {{{<run_identifier>_chemistry}}}. \\\\ Units should be:\\ #/m2/s or g/m2/s or ppm/m2/s or mumol/m2/s or kg/m2/yr or g/m2/yr\\\\ Note that gases are not imported to SALSA from the chemistry module since the chemistry module is not applied! ||
-||[=#PA0645 PA0645]  || output of "..." requires salsa = .TRUE.   ||Output of number concentrations of aerosol particles or gaseous compounds are only available when the aerosol module SALSA has been activated by giving the {{{&salsa_parameters}}} namelist.||
+||[=#PA0645 PA0645]   || surface element at grid point (j,i) = ( ... ) is not a water surface, so that information given in water_pars is neglected. || ||
 ||[=#PA0646 PA0646]  || output of "..." requires salsa = .TRUE.   ||Output of the aerosol mass concentrations is only available when the aerosol module SALSA has been activated by giving the {{{&salsa_parameters}}} namelist.||
-||[=#PA0647 PA0647]  || output of "..." requires salsa = .TRUE.   ||Output of the lung-deposited surface area (LDSA) of aerosol particles is only available when the aerosol module SALSA has been activated by giving the {{{&salsa_parameters}}} namelist.||
+||[=#PA0647 PA0647]   || surface element at grid point (j,i) = ( ... ) is not a pavement surface, so that information given in pavement_pars is neglected. || ||
 ||[=#PA0648 PA0648]  || No grid coarsening possible, multigrid approach effectively reduces to a Gauss-Seidel scheme. || The convergence of the pressure solver might be insufficient and the simulation can become unstable. This case, it is worthwhile to increase the number of Gauss-Seidel iterations ([../inipar#ngsrb ngsrb]). ||
 ||[=#PA0648 ~~PA0648~~ ?]  || Invalid input value: ptemp || Air temperature given to the subroutine for ternary nucleation ({{{ternucl}}}) is not within the allowed temperature range of 240-300 K. ||
@@ -868 +869 @@
 ||[=#PA0668 PA0668]  || The potential temperature does not lie between 220 K and 330 K. || pt exceed a specified limit (vdi_internal_controls). ||
 ||[=#PA0669 PA0669]  || 2 deltat waves are generated || The u component at a control grid point or the means of the meteorological variables exhibit 2 delta t waves (vdi_internal_controls). ||
+||[=#PA0671 PA0671]  || For non-pavement surfaces the combination of lai = 0.0 and c_veg = 1.0 is not allowed. || ||
+||[=#PA0672 PA0672]  || Usage of dynamic input file requires canopy_mode = read_from_file_3d || ||
 ||[=#UI0001 UI0001]   ||unknown location "..."   ||The location of the CALL of user_actions has to be one of 'before_timestep', 'after_integration', 'after_timestep', 'u_tendency' 'v_tendency', 'w_tendency', 'pt_tendency', 'sa_tendency', 'e_tendency', 'q_tendency', 's_tendency'. The location of the CALL of user_actions_ij has to be one of 'u_tendency' 'v_tendency', 'w_tendency', 'pt_tendency', 'sa_tendency', 'e_tendency', 'q_tendency', 's_tendency'.   ||
 ||[=#UI0002 UI0002]   ||location "..." is not allowed to be called with parameters "i" and "j"   || The location of the CALL of user_actions_ij must not be 'before_timestep', 'after_integration', 'after_timestep' ||