Changes between Version 624 and Version 625 of doc/app/errmsg

Timestamp:

May 3, 2019 7:21:07 AM (6 years ago)

Author:

hellstea

Comment:

--

doc/app/errmsg

@@ -853 +853 @@
 ||[=#PA0650 PA0650]  || Invalid input value: pc_sa  || Number concentration of gaseous sulphuric acid  given to the subroutine for ternary nucleation ({{{ternucl}}}) is not within the allowed range of 1e4-1e9 cm^-3^.  ||
 ||[=#PA0651 PA0651]  || Invalid input value: pc_nh3  || Mixing ratio of gaseous ammonia given to the subroutine for ternary nucleation ({{{ternucl}}}) is not within the allowed range of 0.1-100 ppt.   ||
-||[=#PA0652 PA0652]  || Child domain too narrow [or shallow] for anterpolation in x- [or y- or z-]direction || In case of nesting_mode = 'two-way', the child domain must cover a sufficient number of parent-grid cells in all directions. Otherwise anterpolation is not possible. The absolute minimum number of parent-grid cells covered in x- and y-directions is 3 + 2*[../nestpar#anterpolation_buffer_width anterpolation_buffer_width], and 2 + [../nestpar#anterpolation_buffer_width anterpolation_buffer_width] in z-direction. However, it is recommended that the child domain covers a much larger number of parent-grid cells. This error message is only given if nesting_mode = 'two-way'. ||
-||[=#PA0653 PA0653]  || Anterpolation_buffer_width value too high, reset to 0     || In case of a marginally small child domain (see PA0652 above), the user is warned and [../nestpar#anterpolation_buffer_width anterpolation_buffer_width] is set to 0 (the default value is 2) so that the minimum criterion (see PA0652 above) for the child domain size in terms of the number of parent-grid cells covered is satisfied. However, it is recommended that the child domain covers a much larger number of parent-grid cells. This warning is only given if nesting_mode = 'two-way'.  ||
-||[=#PA0654 PA0654]  || Anterpolation_buffer_width value too high, reset to the default value 2   || In case of too wide anterpolation buffer, the user is informed and [../nestpar#anterpolation_buffer_width anterpolation_buffer_width] is reset to its default value 2 so that the minimum criterion (see PA0652 above) for the child domain size in terms of the number of parent-grid cells covered is satisfied. However, it is recommended that the child domain covers a much larger number of parent-grid cells. This informative message is only given if nesting_mode = 'two-way'. ||
+||[=#PA0652 PA0652]  || Child domain too narrow [or shallow] for anterpolation in x- [or y- or z-]direction || In case of [../nestpar#nesting_mode nesting_mode] = 'two-way', the child domain must cover a sufficient number of parent-grid cells in all directions. Otherwise anterpolation is not possible. The absolute minimum number of parent-grid cells covered in x- and y-directions is 3 + 2*[../nestpar#anterpolation_buffer_width anterpolation_buffer_width], and 2 + [../nestpar#anterpolation_buffer_width anterpolation_buffer_width] in z-direction. However, it is recommended that child domains cover much larger number of parent-grid cells. This error message is only given if nesting_mode = 'two-way'. ||
+||[=#PA0653 PA0653]  || Anterpolation_buffer_width value too high, reset to 0     || In case of a marginally small child domain (see PA0652 above), the user is warned and [../nestpar#anterpolation_buffer_width anterpolation_buffer_width] is set to 0 (the default value is 2) so that the minimum criteria (see PA0652 above) for the child domain size in terms of the number of parent-grid cells covered are satisfied. However, it is recommended that child domains cover much larger number of parent-grid cells. This warning is only given if [../nestpar#nesting_mode nesting_mode] = 'two-way'.  ||
+||[=#PA0654 PA0654]  || Anterpolation_buffer_width value too high, reset to the default value 2   || In case of too wide anterpolation buffer, the user is informed and [../nestpar#anterpolation_buffer_width anterpolation_buffer_width] is reset to its default value 2 so that the minimum criteria (see PA0652 above) for the child domain size in terms of the number of parent-grid cells covered are satisfied. However, it is recommended that child domains cover much larger number of parent-grid cells. This informative message is only given if [../nestpar#nesting_mode nesting_mode] = 'two-way'. ||
 ||[=#UI0001 UI0001]   ||unknown location "..."   ||The location of the CALL of user_actions has to be one of 'before_timestep', 'after_integration', 'after_timestep', 'u_tendency' 'v_tendency', 'w_tendency', 'pt_tendency', 'sa_tendency', 'e_tendency', 'q_tendency', 's_tendency'. The location of the CALL of user_actions_ij has to be one of 'u_tendency' 'v_tendency', 'w_tendency', 'pt_tendency', 'sa_tendency', 'e_tendency', 'q_tendency', 's_tendency'.   ||
 ||[=#UI0002 UI0002]   ||location "..." is not allowed to be called with parameters "i" and "j"   || The location of the CALL of user_actions_ij must not be 'before_timestep', 'after_integration', 'after_timestep' ||