Changes between Version 561 and Version 562 of doc/app/errmsg

Timestamp:

Jul 18, 2018 7:39:50 AM (6 years ago)

Author:

raasch

Comment:

--

doc/app/errmsg

@@ -419 +419 @@
    }}}
 }}}
-||[=#PA0341 PA0341]   || non-default setting of dz_soil does not allow to use pavement_type /= 0) ||Currently it is not possible to asign a user-defined number of soil layers when using pavement_type /= 0 as the individual depths of the pavements are fixed values. ||
+||[=#PA0341 PA0341]   || non-default setting of dz_soil does not allow to use pavement_type /= 0) ||Currently it is not possible to assign a user-defined number of soil layers when using pavement_type /= 0 as the individual depths of the pavements are fixed values. ||
 ||[=#PA0342 PA0342]   ||pavement_type = 0 (user_defined) requires setting of pavement_heat_conduct /= 9999999.9 || In case of a user-defined pavement type, the heat conductivity of the pavement must be given ||
 ||[=#PA0343 PA0343]   ||initializing_actions = 'initialize_vortex' is not allowed with conserve_volume_flow = .T. || Self-explanatory. Check [../inipar#conserve_volume_flow conserve_volume_flow] and/or [../inipar#initializing_actions initializing_actions] for different values. ||
@@ -693 +693 @@
 ||[=#PA0469 PA0469]   || unknown aerosol species for bulk microphysics  || aerosol species must be set to a known type. See [../inipar#aerosol_bulk aerosol_bulk]. ||
 ||[=#PA0470 PA0470]   || unknown aerosol species for lagrangian cloud microphysics  || aerosol species must be set to a known type. See [../parpar#aero_species aero_species]. ||
-||[=#PA0471 PA0471]   ||  number of soil layers (...) does not match to the number of layers specified in soil_temperature (...) || For each soil layer an initial soil temperature must be prescribed (see [wiki:doc/app/lsmpar#soil_temperature soil_temperature]). ||
+||[=#PA0471 PA0471]   ||  number of soil layers (...) does not match to the number of layers specified in soil_temperature (...) || For each soil layer an initial soil temperature must be prescribed (see [wiki:doc/app/lsmpar#soil_temperature soil_temperature]). The number of soil layers is defined by [wiki:doc/app/lsmpar#dz_soil dz_soil]. ||
 ||[=#PA0472 PA0472]   || deep_soil_temperature is not set but must be /= 9999999.9 || Since r2729 the [../lsmpar#deep_soil_temperature deep_soil_temperature] is no longer part of the soil_temperature array and must be specific separately. The deep soil temperature serves as bottom boundary condition for heat diffusion in the soil model. Note that there is no analogous value for soil moisture as the bottom of the soil can either be set to bedrock (water accumulates) or free drainage (water is lost). ||
 ||[=#PA0473 PA0473]   || Vertical grid stretching is not allowed for complex_terrain = .T. || Self-explanatory. See [../inipar#complex_terrain complex_terrain] and [../inipar#dz_stretch_level dz_stretch_level].  ||