| 244 | | ||[=#PA0221 PA0219] ||number of PEs of the prescribed topology (...) does not match the number of PEs available to the job () || || |
| 245 | | ||[=#PA0222 PA0220] ||if the processor topology is prescribed by the user, both values of "npex" and "npey" must be given in the NAMELIST-parameter file || || |
| 246 | | ||[=#PA0223 PA0221] ||psolver = "poisfft_hybrid" can only be used in case of a 1d-decomposition along x || || |
| 247 | | ||[=#PA0224 PA0222] ||no matching grid for transpositions found || || |
| 248 | | ||[=#PA0225 PA0223] ||x-direction: gridpoint number (...) is not an integral divisor of the number of procesors (...) || || |
| 249 | | ||[=#PA0226 PA0224] ||x-direction: nx does not match the requirements given by the number of PEs used please use nx = ... instead of nx =... || || |
| 250 | | ||[=#PA0227 PA0225] ||y-direction: gridpoint number (...) is not an integral divisor of the number of processors (...) || || |
| 251 | | ||[=#PA0228 PA0226] ||y-direction: ny does not match the requirements given by the number of PEs used please use ny = ... instead of ny =... || || |
| 252 | | ||[=#PA0229 PA0227] ||1d-decomposition along x chosen but nz restrictions may occur since ups-scheme is activated || || |
| 253 | | ||[=#PA0230 PA0228] ||transposition z --> x: nz=... is not an integral divisior of pdims(1)= ... || || |
| 254 | | ||[=#PA0231 PA0229] ||transposition x --> y: nx+1=... is not an integral divisor of pdims(2)= ... || || |
| 255 | | ||[=#PA0232 PA0230] ||transposition y --> z: ny+1=... is not an integral divisor of pdims(1)=... || || |
| 256 | | ||[=#PA0233 PA0231] ||transposition x --> y: ny+1=... is not an integral divisor of pdims(1)=... || || |
| 257 | | ||[=#PA0234 PA0232] ||direct transposition z --> y (needed for spectra): nz=... is not an integral divisor of pdims(2)=... || || |
| 258 | | ||[=#PA0235 PA0233] ||mg_switch_to_pe0_level out of range and reset to default (=0) || || |
| 259 | | ||[=#PA0236 PA0234] ||not enough memory for storing gathered multigrid data on PE0 || || |
| 260 | | ||[=#PA0237 PA0235] ||multigrid gather/scatter impossible in non parallel mode || || |
| 261 | | ||[=#PA0238 PA0236] ||more than 10 multigrid levels || || |
| 262 | | ||[=#PA0239 PA0237] ||The value for "topography_grid_convention" is not set. Its default value is only valid for "topography" = "single_building", "single_street_canyon" or "read_from_file" Choose "cell_edge" or "cell_center". || || |
| 263 | | ||[=#PA0240 PA0238] ||The value for "topography_grid_convention" is not recognized. Choose "cell_edge" or "cell_center". || || |
| 264 | | ||[=#PA0241 PA0239] ||netcdf_precision must contain a "_" netcdf_precision(...)="..." || || |
| 265 | | ||[=#PA0242 PA0240] ||illegal netcdf precision: netcdf_precision( ...)="..." || || |
| | 244 | ||[=#PA0221 PA0221] ||number of PEs of the prescribed topology (...) does not match the number of PEs available to the job () || || |
| | 245 | ||[=#PA0222 PA0222] ||if the processor topology is prescribed by the user, both values of "npex" and "npey" must be given in the NAMELIST-parameter file || || |
| | 246 | ||[=#PA0223 PA0223] ||psolver = "poisfft_hybrid" can only be used in case of a 1d-decomposition along x || || |
| | 247 | ||[=#PA0224 PA0224] ||no matching grid for transpositions found || || |
| | 248 | ||[=#PA0225 PA0225] ||x-direction: gridpoint number (...) is not an integral divisor of the number of procesors (...) || || |
| | 249 | ||[=#PA0226 PA0226] ||x-direction: nx does not match the requirements given by the number of PEs used please use nx = ... instead of nx =... || || |
| | 250 | ||[=#PA0227 PA0227] ||y-direction: gridpoint number (...) is not an integral divisor of the number of processors (...) || || |
| | 251 | ||[=#PA0228 PA0228] ||y-direction: ny does not match the requirements given by the number of PEs used please use ny = ... instead of ny =... || || |
| | 252 | ||[=#PA0229 PA0229] ||1d-decomposition along x chosen but nz restrictions may occur since ups-scheme is activated || || |
| | 253 | ||[=#PA0230 PA0230] ||transposition z --> x: nz=... is not an integral divisior of pdims(1)= ... || || |
| | 254 | ||[=#PA0231 PA0231] ||transposition x --> y: nx+1=... is not an integral divisor of pdims(2)= ... || || |
| | 255 | ||[=#PA0232 PA0232] ||transposition y --> z: ny+1=... is not an integral divisor of pdims(1)=... || || |
| | 256 | ||[=#PA0233 PA0233] ||transposition x --> y: ny+1=... is not an integral divisor of pdims(1)=... || || |
| | 257 | ||[=#PA0234 PA0234] ||direct transposition z --> y (needed for spectra): nz=... is not an integral divisor of pdims(2)=... || || |
| | 258 | ||[=#PA0235 PA0235] ||mg_switch_to_pe0_level out of range and reset to default (=0) || || |
| | 259 | ||[=#PA0236 PA0236] ||not enough memory for storing gathered multigrid data on PE0 || || |
| | 260 | ||[=#PA0237 PA0237] ||multigrid gather/scatter impossible in non parallel mode || || |
| | 261 | ||[=#PA0238 PA0238] ||more than 10 multigrid levels || || |
| | 262 | ||[=#PA0239 PA0239] ||The value for "topography_grid_convention" is not set. Its default value is only valid for "topography" = "single_building", "single_street_canyon" or "read_from_file" Choose "cell_edge" or "cell_center". || || |
| | 263 | ||[=#PA0240 PA0240] ||The value for "topography_grid_convention" is not recognized. Choose "cell_edge" or "cell_center". || || |
| | 264 | ||[=#PA0241 PA0241] ||netcdf_precision must contain a "_" netcdf_precision(...)="..." || || |
| | 265 | ||[=#PA0242 PA0242] ||illegal netcdf precision: netcdf_precision( ...)="..." || || |
| 270 | | ||[=#PA0247 PA0248] ||NetCDF file for volume data ... from previous run found, but this file cannot be extended because the current output time is less or equal than the last output time on this file. New file is created instead. || || |
| 271 | | ||[=#PA0248 PA0249] ||NetCDF file for volume data ... from previous run found. This file will be extended. || || |
| 272 | | ||[=#PA0249 PA0250] ||NetCDF file for cross-sections ... from previous run found, but this file cannot be extended due to variable mismatch. New file is created instead. || || |
| 273 | | ||[=#PA0250 PA0251] ||NetCDF file for cross-sections ... from previous run found, but this file cannot be extended due to mismatch in number of cross sections. New file is created instead. || || |
| 274 | | ||[=#PA0251 PA0252] ||NetCDF file for cross-sections ... from previuos run found but this file cannot be extended due to mismatch in cross section levels. New file is created instead. || || |
| 275 | | ||[=#PA0252 PA0253] ||NetCDF file for cross sections ... from previous run found, but this file cannot be extended because the current output time is less or equal than the last output time on this file. New file is created instead. || || |
| | 270 | ||[=#PA0247 PA0247] ||NetCDF file for volume data ... from previous run found, but this file cannot be extended because the current output time is less or equal than the last output time on this file. New file is created instead. || || |
| | 271 | ||[=#PA0248 PA0248] ||NetCDF file for volume data ... from previous run found. This file will be extended. || || |
| | 272 | ||[=#PA0249 PA0249] ||NetCDF file for cross-sections ... from previous run found, but this file cannot be extended due to variable mismatch. New file is created instead. || || |
| | 273 | ||[=#PA0250 PA0250] ||NetCDF file for cross-sections ... from previous run found, but this file cannot be extended due to mismatch in number of cross sections. New file is created instead. || || |
| | 274 | ||[=#PA0251 PA0251] ||NetCDF file for cross-sections ... from previuos run found but this file cannot be extended due to mismatch in cross section levels. New file is created instead. || || |
| | 275 | ||[=#PA0252 PA0252] ||NetCDF file for cross sections ... from previous run found, but this file cannot be extended because the current output time is less or equal than the last output time on this file. New file is created instead. || || |
