Changes between Version 316 and Version 317 of doc/app/errmsg

Timestamp:

Jun 7, 2017 8:17:06 AM (7 years ago)

Author:

Giersch

Comment:

--

doc/app/errmsg

@@ -62 +62 @@
 ||[=#PA0037 PA0037]   ||   || message number is unused ||
 ||[=#PA0038 PA0038]   || turbulent_outflow = .T. requires bc_lr = "dirichlet/radiation" || When using the turbulent outflow method, non-cyclic boundary condition along the x direction must be used. See also [../inipar#turbulent_outflow turbulent_outflow]. ||
-||[=#PA0039 PA0039]   ||negative weighting factor: ...  || The weighting factor of the cloud droplets is recalculated during the calculation of the droplet growth due to collision and coalescence. This error appears if the newly calculated value for the weighting factor is negative and the '' 'palm' '' collision kernel is used (see [../parpar#collision_kernel collision_kernel]). It may be caused by illegal values of the collision kernel. Please submit a [/newticket trouble ticket] if you have run into this error. ||
+||[=#PA0039 PA0039]   ||   || message number is unused ||
 ||[=#PA0040 PA0040]   ||LWC is not conserved during collision! LWC after condensation: ... LWC after collision: ... || This should not happen. Please write a [https://palm.muk.uni-hannover.de/trac/newticket ticket].  ||
 ||[=#PA0041 PA0041]   ||simulating a plant canopy requires a non-zero drag coefficient, given value is canopy_drag_coeff = 0.0   || When simulating a plant canopy, a non-zero [../canpar#canopy_drag_coeff canopy_drag_coeff] must be set in the parameter file under NAMELIST {{{&canopy_par}}}. The [/wiki/doc/app/canpar canopy model] in PALM adds an additional sink/source terms to the momentum equations, the prognostic equation for temperature, and the subgrid scale turbulent kinetic energy equation. In case of [../inipar#humidity humidity] = ''.TRUE.'' or [../inipar#passive_scalar passive_scalar] = ''.TRUE.'', an additional source/sink term is added to the prognostic equation of the respective scalar.\\ If [../canpar#canopy_drag_coeff canopy_drag_coeff] = 0.0, the additional terms equal zero and there would be no effect on the flow.  ||